A/R and M/O to 500 Bedded Hospital in Dr. RPGMC at Tanda in Distt. Kangra (Deposit work) (SH-Repair of various works for the year 2019-20)

Amount

Repair to plaster with cement mortar 1:3 (One cement : Three sand) in patches of 2.50 sqm (Two decimal five zero) square metres upto any thickness including cutting the patches in proper shape and re-plastering the surfacing to the wall including disposal of rubbish to the dumping ground complete and as directed by the Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals

Providing and fixing anodised aluminium work for door, windows, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawl plugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading for glazinge/ panelling C.P. brass/stainless steel screws for doors windows and ventilatiors and glazed partitions frames. All complete as per architectural drawings and as directed by the Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing anodised aluminium work for door, windows, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawl plugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading for glazinge/ panelling C.P. brass/stainless steel screws for shutters of doors windows & ventilators including providing and fixing hinges/pivots and making provisions for fixing of fittings where ever required including the cost of PVC/neoprene gaskets as required (fittings and glazing/panelling shall be paid for separately) all complete as per architectural drawings and as directed by the Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals

Providing and fixing glazing in aluminium door, window, ventilator shutters and partition etc with PVC/neoprens gasket etc. complete as per the architectural drawings and the directions of Engineer-In-charge (cost of aluminium snap beading shall be paid in basic item.) Glazing with glass panes of 6mm(Six millimetres) thickness (weight not less than 13.75 kg/sqm (Thirteen point seventy five kilgrams/square metre) Modi guard or its equivalent and as directed by the Engineer-Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing double action hydraulic floor spring of approved brand and manufacture (conforming to IS 6315) for aluminium door including cost of cutting floor as required embedding in floors complete as per the direction of the Engineer-Incharge including making good the floors and as directed by the Engineer-Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 4mm (Four millimetres) thick E-Board (Embassed board) Ceiling of approved quality of ISI Mark including fixing to base frames with screws and clamps etc complete (frame work for base & cover fillets to be measured and paid for separately) and as per direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 19mm (Nineteen milimetres) thick commercial board water proof shutters for cup boards including fixing with nickel plated piano hinges with screws etc complete and as directed by the Engineer-Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 1.00mm (One decimal zero milimetres) thick coloured or plain lamination sheet (sunmica) on boards/ply wood sheets with approved adhesive and nails etc complete and as directed by the Engineer-Incharge, including carriage of materials within all leads, lifts and other incidentals.

White glazed tiles 6mm thick in flooring, treads of steps and landing laid on a bed of 12mm (Twelve milimetres) thick cement mortar 1:3(One cement :Three sand) (30x60cm (Thirty into sixty centimetres) thick Somany, Kajaria or Cera make finished with flush pointing in white cement complete and as directed by the Engineer-Incharge, including carriage of materials within all leads, lifts and other incidentals.

White glazed tiles 6mm (Six millimeters) thick in skirting , risers of steps and dado for all heights and 12mm (Twelve millimeters) thick sizes of tiles with cement mortar 1:3 (One cement: Three sand) and jointed with white cement slurry and as directed by the Engineer-Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing second class deodar wood work in frames of doors, windows, clerestory, windows and other frames wrought, framed and fixed in position and as directed by the Engineer-Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 40mm (Forty milimetres) thick second class deodar wood panelled glazed or panelled and glazed shutters for doors windows and clerestory windows, including black enamelled iron butt hinges with necessary screws, as directed by the Engineer-Incharge, including carriage of materials within all leads, lifts and other incidentals

Providing and fixing first class Deodar wood 25mm (Twenty five millimetres) thick panelled glazed or panelled and glazed shutters for cup boards etc; including complete, as directed by the Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals

Providing and fixing 40mm (Forty millimetres) thick first class deodar wood wire gauge shutters using galvanised M.S. wire gauge of IS gauge designation 85G with wire of dia 0.56mm for doors, windows and clerestory windows including bright finished black enamelled iron hinges with necessary screws complete as directed by the Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals

Providing and fixing 6mm (Six millimeters) thick plain asbestos cement sheet ceiling of approved quality with butt jointing and wood screws (frame work and cover fillets to be measured and paid for separately) as per approved drawing, design and as directed by the Engineer-Incharge, including carriage of materials within all leads, lifts and other incidentals

Providing and fixing 10mm (Ten millimetrers) thick plaster flat surfaces of paris (Gypsum unhydrous) ceiling upto a height of 5 (Five) metres above floor level excluding first class kail wood stripes 25mmx6mm (Twenty five into six millimetres) with 10 mm (Ten) gap in between and reinforced with rabbit wire mesh fixed to wooden frame (frame work to be measured and paid for separatly) as directed by the Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals

Providing and fixing brass curtain rail with rollers stop ends and brackets in pelmets instead of wooden curtain rod 25 mm dia and brackets of first class deodar wood (actual length) of rails of be measured, as directed by the Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals

Providing and fixing M.S. grills Ornamental Grill of required patterns in wooden frames of windows etc. with M.S. Flats, square or round bars with round headed bolts and nuts or by screws complete as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Providing 40x3mm (Forty into three millimeters) flat iron hold fast 40cm (Forty centimeters) long including fixing to frame with 10mm (Ten millimeters) diameter bolts & nuts and wooden plugs and embedding in cement concrete block 30x10x15cm. 1:3:6 (One cement : Three sand: Six graded stone aggregate 20mm nominal size) as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing anodized aluminium sliding door bolts anodized transparent or dyed to required colour and shade with necessary screws etc. completed including entire carriage of materials within all leads, lifts and other incidentals

300x16mm size (Three hundred into sixteen milimetres)nominal size

250x16mm(Two hundred fifty into sixteen milimetres) nominal size

Providing and fixing 300x10mm (Three hundred into ten millimetres) aluminium tower bolts (berrel type) anodized trans parent or dyed to required shade and colour with screws etc. complete as per direction Engineer-In-charge including carriage of material within all leads, lifts and other incidentals.

300x10mm (Three hundred into sixteen millimetres) nominal size

250x16mm(Two hundred fifty into sixteen milimetres) nominal size

Providing and fixing 300x10mm (Three hundred into ten millimetres) aluminium tower bolts (berrel type) anodized trans parent or dyed to required shade and colour with screws etc. complete as per direction Engineer-In-charge including carriage of material within all leads, lifts and other incidentals.

125mm (One hundred twenty five milimetres) nominal size

100mm (One hundred milimetres) nominal size

Providing and fixing 100mm (One hundred millimetres) size bright finished brass rim latch and lock a pair of knobs with necessary screws etc. complete (indian make of approved quality) as per the directions of Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 100mm (One hundred milimetres) bright finished brass door stoper with rubber cushion screws etc to suit shutter thickness cmoplete and as per direction of the Engineer-Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 65x35mm (Sixty five into Thirty five milimetres) special quality bright finished brass cup-board locks or ward robe locks with six levers including necessary screws etcetra complete (Indian make of approved quality) complete and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing chromium plated brass sliding door bolts with nuts and screws etc. complete. as directed by the Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals

300x16mm (Three hundred into sixteen millimetres) nominal size

250x16mm(Two hundred fifty into sixteen milimetres) nominal size

Providing and fixing 150mm (One hundred fifty millimetres) M.S. double acting spring hinges of approved brand with necessary screws etc. complete as directed by the Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals

Providing and fixing 12mm (Twelve milimetres) thick preliminated board of both side BWP Phenol bounded exterior/interior grade panelled shelves with 40mm (Forty milimetres) frame of first class deodar wood for study shelves/table including bright finished/black enameled iron butt hinges with necessary screws as directed by the Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and laying 20mm (Twenty millimeters) thick granite stone in flooring 20mm (Twenty millimeters) (average) thickness base of cement mortar 1:3 (One cement : Three sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing and polishing complete and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 10mm thick anti skid water proof stain and impect resistent heavy duty vetrified tiles Nitco or equivalant 600x600mmx10mm (Six hundred into Six hundred into ten millimetres) manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm (Twelve millimetres) thick cement mortar 1:3 (One cement : Three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing G.I. sheet 0.80 mm (Zro point eighty millimetes) thick to 1.20mm (One point twenty millimetres) thick including fixing with prepainted iron Jor L hooks, bolts and nuts 8mm (Eight millimetres) diametre with galvanized limpet and rubber washers complete with all accesoriees as required as directed by the Engineer-Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing valleys 90cm (Ninety centimeters) over all in 0.63mm (Zero decimal six three milimetres) thick plain galvanised iron G.I. sheet fixed with galvanised iron J or L hooks, bolts and nuts 8mm(Eight milimetres) diameters G.I. limpet and bitumen washers as directed by the Engineer-Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing ridges or hips 60 cm(Sixty centimeters) over all in 0.63mm(Zero decimal six three milimetres) thick plain galvanized iron G.I. sheet fixed with galvanized iron J or L hooks, bolts and nuts 8mm(Eight milimetres) diameters G.I. limpet and bitumen washers as directed by the Engineer-Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 150mm (One hundred fifty millmetres) dia for C.I. pipes M S holder bat clamps of approved design to C.I. or S.C.I. pipes embeded in including cement concrete blocks 10x10x10cm (Ten into ten into ten centimeters) of 1:2:4 (One Cement : Two Sand : Four graded crushed stone aggregate 20 mm (Twenty millimetres) nominal sizecutting and cost of cutting holes and making good the wall etc; making good including entire carriage of materials within all leads lifts and other incidentals.

150mm (One hundred fifty millmetres) dia

100mm (One hundred millmetres) dia

Providing 2mm (Two millimetres) thick sheet perpex sheet roofing fixed with G.I. or J. and L hooks,bolts and nuts 8mm (eight millmetres)diametre with bitumen and G.I. limpet washers filled with white lead complete excluding cost of purlins, rafters and trusses including entire carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 0.60mm (Zero decimal Six Zero milimetres) thick prepainted sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating to back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks,bolts and nuts 6mm (Six milimetres) diametres with prepainted limpet and rubber washers complete with all accessories as required as directed by the Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals

Providing and fixing ridges or hips 60cm (Sixty centimeters) over all with 0.60mm (Zero point Sixty millimeters) thick prepainted sheet roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 (Tweny) microns over 5 (Five) microns primer coating to back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six millimeters) diametres with prepainted G.I. limpet and bitumen washers complete with all accesoriees as required as directed by the Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals

Providing and laying on wall face PVC (D-Plast) rain water working pressure not less than 4.50 kg/sqm (Four decimal Five Zero kilograms per square metre)including filling the joints with approved adhesive complete and as directed by the Engineer-Incharge, including entire carriage of materials within all leads, lifts and other incidentals.

100mm (One hundred millmetres) dia

150mm (One hundred fifty millmetres) dia

Providing and fixing PVC plain bend 150mm (One hundred fifty millimetres) dia on wall face P.V.C. acessories for rain water pipes 4.50 kgs/sqm (Four point five zero kilograms per square metre) working pressure class B PVC D-Plast ISI mark of SFMC/Finolex/Relpipe(Reliance) or its equivalent high denesity pipe for rain water pipe fixed with approved adhesive including filling the joints complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing M.S. B.P Sheet 1.66mm to 2mm (One point sixty six to Two milimetres) thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separately) as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing polycarbonated transparent sheet 1.20mm (One decimal twenty millimeters) thick in roofing with galvanised J or L hooks bolts and nuts with G.I. Limpet and bitumen rubber washer complete with all accessories as required as per direction of Engineer-in-Charge, including entire carriage of materials within all leads, lifts and other incidentals.

Steel work welded in built up sections,trusses and framed work, including cutting, hoisting ,fixing in position and applying a priming coat of red lead paint in beams joists channels, angles, tee ,flats with connecting plates or angle cleats as in main and cross beams,hip and jack rafters,purlins connected to common rafters and the like as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete, as directed by the Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima ) or equavalent Asian paints of Nerolac on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete as directed by the Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Applying priming coat over new steel & other metal surfaces after and including preparing the surface by thoroughly cleaning oil grease dirt and other foreign matter and scoured with wire brushes fine steel wool scrapers and sand paper complete with ready mixed priming paint brushing red lead,Red-oxide/zinc oxide chrome complete as directed by the Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals

Applying modrent solution on new G.I sheet for preparation of surface for painting @5 (Five) litres/100 sqm (One hundred square meter) of surface and rubbing the solution with brush including thoroughly cleaning the surface of all oil grease dirt and other foreign matter complete as directed by the Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals

Painting two coats (excluding priming coat)on new steel and other metal surface under coat with ready mixed paint brusing to give an even shade including cleaning the surface all dirt, dust and other foreign matter with white readymixed paintcomplete and as directed by the Engineer-in-Charge within all leads, lifts of materials and other incidentals

Painting (Two or more coats) on G.I. sheets with readymix paint of approved brand and manufecture on old work to give an even shade white /grey/green shade complete as directed by the Engineer- Incharge, including entire carriage of materials within all leads, lifts and other incidentals.

Removing old paint from steel and other metal surfaces & making the surface even with paint remover of approved brand and manufacture as directed by the Engineer-Incharge, including carriage of materials within all leads, lifts and other incidentals

Applying priming coat over new wood and wood based surfaces after and including preparing the surfaces of all dirt, dust and other foreign matter and sand papering and knotting with ready mixed paint brushing wood pink primer including entire carriage of materials within all leads, lifts and other incidentals

Painting two coats (excluding priming coat)on new wood and wood based surface under coat with enamel and finishing coating with flat oil paint, brushing to give an even shade including cleaning of all with paint other then white as directed by the Engineer-Incharge, including carriage of materials within all leads, lifts and other incidentals

Applying priming coat on new concrete/masonry/asbestos cement/plastered surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required with readymixed primer complete as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Painting two coats(excluding priming coat on new concrete masonry/plaster surfaces with readymixed paint brushing for use on floors to give an even shade including cleaning the surface of all dirt, dust and other foreign matter and sand papering as required with paint other than white as directed by the Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals

Removing dry or oil bound distemper by washing and scraping and sand papering the wall surface smooth including necessary repairs to scratches complete, as directed by the Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals

Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on undecorated wall surfaces to give an even shade including thoroughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth including applying of putty as required for making the surface complete as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Removal of old broken glass panes (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins as directed by the Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals

Supplying and fixing 4mm (Four millimetres) thick Plain Glass panes with putty and nails including removal of broken glass panes wherever necessary as directed by the Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Supplying and fixing expended metal to wood or steel members in partitions etcetera Weight exceeding 3 kgs (Three kilograms) not exceeding 5 kgs (Five kilograms) per square metre as directed by the Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing Kota stone slab 25 mm (Twenty five milimetres) thick in risers of steps,skirting dado and pillars laid on 12 mm (Twelve milimetres) (average) thick cement mortar 1:3 (One cement: Three sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs including making noising rubbing and polishing complete as directed by the Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing Gl Clip in Metal Ceiling System of 600x600mm (Six hundred into Six hundred millimetres) module which includes providing and fixing 'C' wall angle of size 20x30x20 mm made of 0.5 mm (Zero point five millimetres) thick pre painted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300 mm (Three hundred millimetres) centre to centre, suspending the main C carrier of size 10x38x10 mm made (Ten into thirty eight into ten millimetres) of G.I steel 0.7 mm (Zero point seven millimetres) thick from the soffit with help of soffit cleat 37x27x25x1.6 mm(Thirty seven into twenty seven into twenty five into one point six millimetres), rawl plugs of size 38x12 mm (Thirty eight into twelve millimetres) and C carrier suspension clip and main carrier bracket at 1000 mm one thousand millimetres centre to centre inverted triangle shaped Spring Tee having height of 24 mm (twenty four millimetres) and width of 34 mm (thirty four millimetres) made of Gl steel 0.45 mm (zero point forty five) thick is then fixed to the main C carrier and in direction perpendicular to it at 600 mm 9Sxi hundred millimetres) centres with help of suspension brackets. Wherever the main C carrier and spring T have to join, C carrier and spring T connectors have to be used. All sections to be galvanized @ 120 gms/sqm (One hundred) (both side inclusive), fixing with clip in tiles into spring T with GI Metal Ceiling Clip complete as directed by the Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing to wall ceiling and floor galvanised mild steel tubes (Medium grade) Cera or its equivalent approved quality tube fitting and clamps including making good the wall, ceiling and floor as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

15mm (Fifteen milimetres) nominal bore

20mm (Twenty milimetres) nominal bore

Providing and fixing vitreous China wash down, water closet (European type. W.C. pan) with integral 'P' or 'S' trap including jointing the trap with soil pipe Cera or its equivalent in cement mortar 1:1 (One cement : One sand) Angle Indian Universal closet (Seat and over to be measured and paid for separately as directed by the Engineer-Incharge, including carriage of materials within all leads, lifts and other incidentals

Providing and fixing sand cast iron 100mm (Hundred milimetres) size Cera or its equivalent P or S traps for water closet (squatting pan) including jointing the trap with pan and soil pipe in cement mortar 1:1 (one cement: one sand) as directed by the Engineer-Incharge, including carriage of materials within all leads, lifts and other incidentals

Providing and fixing vitreous china water closet squatting pan (Indian type W.C. pan) size 580mm (Five hundred eighty millimeters) Cera or its equivalent (earth work, bed concrete, foot rest and trap to be measured and paid for separately) as directed by the Engineer-Incharge including entire carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 50mm (Fifty millimetres) thick G.I. Inlet connection Cera or its equivalent for flush pipe with W.C. Pan complete as directed by the Engineer-Incharge including entire carriage of materials within all leads, lifts and other incidentals.

Providing and fixing plastic seat (Solid/Hollow type) and cover Cera or its equivalent for wash down water closet with C.P. Brass hinges and rubber buffers complete and complete as directed by the Engineer-Incharge including entire carriage of materials within all leads, lifts and other incidentals.

Providing and fixing vitreous China squatting plate pattern urinal Cera or its equivalent of size 450mmx350mm (Four hundred fifty into three hundred fifty millimetres) with integral longitudinal flush pipe.as directed by the Engineer-Incharge including entire carriage of materials within all leads, lifts and other incidentals.

Providing and fixing (vitreous China wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white Cera or its equivalent including cutting holes and making good the same but excluding fittings and as directed by the Engineer-Incharge including entire carriage of materials within all leads, lifts and other incidentals.

550x400mm (Five hundred fifty into four hundred millimetres)

400x400mm (Four hundred into four hundred millimetres)

Providing and fixing 600x450x150mm (Six hundred into Four hundred fifty into One hundred fifty millimetres) vitreous china laboratory sink Cera or its equivalent with C.I. or M.S. brackets painted white including cutting holes in walls and making good the same but excluding fittings complete as directed by the Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 610x460mm (Six hundred ten into Four hundred sixty millimetres) with bowl depth 200 mm stainless steel kitchen sink of approved standard ISI make with drain board and C.P. waste with C.I. or M.S. Brackets painted white including cutting holes and making good the same but excluding fitting as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 32mm (Thirty two millimetres) nominal size C.P. Brass chain 50cm (Fifty centimetres) size long and rubber plug of following sizes for sink or wash basin Cera or its equivalent as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 32mm (Thirty two milimetres) diameters rubber plug for sink/wash basin ISI make, as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 32mm (Thirty two millimetres) dia C.P. Brass waste for wash basin or sink ISI make, as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 32mm (Thirty two milimetres) diametres M.I. Union for wash basin or sink ISI make complete as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 100mm (One hundred milimetres) diametres C.P brass grating for gully floor or Nahni trap ISI make as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 600x450mm (Six hundred into Four hundred fifty milimetres) size bevelled edge mirror of superior glass mounted on 6mm thick A.C. Sheet or plywood sheet and fixed to wooden plugs with C.P. Brass screws and washers complete as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 600x20mm (Six hundred into Twenty milimetres) size C.P. Brass Towel rail Cera or its equivalent complete with C.P. Brass brackets fixed to wooden plugs with C.P. Brass screws as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 600x120mm (Six hundred into One hundred twenty milimetres) glass shelf with C.P. brass. (Heavy duty makes) brackets and guard rail complete fixed to wooden plugs with C.P. brass screws as directed by the Engineer- in-Charge including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing chromium plated brass soap dish with C.P. brass brackets fixed to wooden cleats with C.P. brass screws Cera or its equivalent as directed by the Engineer-Incharge including entire carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 15mm (Fifteen milimetres) diameters long nose brass bib tap (Superior or heavy type) Cera or its equivalent as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 15mm (Fifteen milimetres) dia long body brass bib tap (Superior or heavy type) Cera or its equivalent complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing C.P. brass bib tap with capstan head (Heavy duty) Cera or its equivalent complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals.

15mm (Fifteen milimetres) nominal bore

20mm (Twenty milimetres) nominal bore

Providing and fixing 15mm (Fifteen milimetres) C.P. brass angle valve without nuts and pipe Cera or its equivalent complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing Mixer for kitchen sink with casted swinging spout at top Cera or its equivalent complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing bath shower Cera or its equivalent complete with necessary fitting as directed by the Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing P.V.C. connection 300x450mm (Three hundred into four hundred fifty millimetres) length with check nut and brass union complete and as directed by the Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing brass full way valve with wheel Cera or its equivalent and as directed by the Engineer-in-Charge, including entire carriage of materials within all leads, lifts and other incidentals.

15mm (Fifteen milimetres) nominal bore

20mm (Twenty milimetres) nominal bore

Providing and fixing brass ball valve (horizontal plunger type) high pressure with polythene plastic floats as directed by the Engineer-Incharge, including entire carriage of materials within all leads, lifts and other incidentals.

15mm (Fifteen milimetres) nominal bore

20mm (Twenty milimetres) nominal bore

Providing and fixing 15mm (Fifteen milimetres) diametres G.I./M.I Union of for wash basin or sink complete as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

15mm (Fifteen milimetres) nominal bore

20mm (Twenty milimetres) nominal bore

Providing and fixing composite end seal compression fittings Cera or its equivalent as per IS-15450-2004 for cold water supply e.g. tees, elbows, reducers, connectors, couplers and clamps with joint testing and fittings complete including cutting and making good the walls etc; as directed by the Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals

Providing and fixing Equal Tees 1216 (One thousand two hundred sixteen)

Providing and fixing Equal Tees 2025 (two thousand twenty five)

Providing and fixing Reducing tees 1620 (One thousand six hundred twenty) all branches

Providing and fixing Reducing tees 2025 (Two thousand twenty five) with all branches

Providing and fixing Female Elbows 1620 X 15 mm thread (One thousand six hundred twenty by fifteen millimetres) thread

Providing and fixing Female Elbows 1620 X20 mm thread (One thousand six hundred twenty nto twenty millimetres) thread

Providing and fixing reducer 1620x1216mm thread (One thousand six hundred twenty by One thousand two hundred sixteen millimetres)

Providing and fixing reducer 2025x1216mm thread (two thousand twenty five by One thousand two hundred sixteen millimetres)

Providing and fixing 1000 litres (One thousand litres) net capacity tank PVC SINTEX having capacity water storage tank of ISI : 9001 : 2008 marked, G.I. inlet and outlet connection, 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting up to all heights above ground level, including entire carriage of materials within all leads, lifts and other incidentals.

Providing and fixing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete as directed by the Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals

110x90mm (One hundred ten into Ninety millimetres) nominal size

110x75mm (One hundred ten into seventy five millimetres) nominal size

Providing and fixing PVC spigot and socketpipes Type-B for soil waste and ventilating pipe, including fixing with approved adhesive etc. complete as directed by the Engineer- in-Charge including entire carriage of materials within all leads, lifts and other incidentals.

110mm (One hundred ten milimetres) diametres

50mm (Fifty milimetres) diametres

Providing and fixing 75mm (Seventy five milimetres) diametres PVC door bend with oval access door, insertion rubber washer 3mm (Three millimetres) thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete. as directed by the Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals

Providing and fixing PVC single equal branch plain ISI marked including fixing with approved adhesive etc. complete as directed by the Engineer-Incharge including entire carriage of materials within all leads, lifts and other incidentals.

110mm (One hundred ten milimetres) diametres

75mm (Seventy five milimetres) diametres

50mm (Fifty milimetres) diametres

Providing and fixing PVC reducer ISI marked including jointing with approved adhesive etc. complete complete as directed by the Engineer-Incharge including entire carriage of materials within all leads, lifts and other incidentals.

110x90mm (One hundred ten into ninety milimetres) diametres

90x75mm (Ninety into Seventy five milimetres) diametres

75x63mm (Seventy five into sixty three milimetres) diametres

Providing and fixing 610x460mm (Six hundred ten into Four hundred sixty millimetres) with bowl depth 200 mm stainless steel kitchen sink of approved standard ISI make with drain board and C.P. waste with C.I. or M.S. Brackets painted white including cutting holes and making good the same but excluding fitting as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing PTMT Coloured/white high density polyethylene / poly propylene 10.00 ltrs (Ten litres) capacity (full flush) European standard control low level flushing cistern with fittings with a pair of brackets with fittings such as lead valve, syphon, 15mm (Fifteen millimetres) nominal size PVC ball valve with polythene float, with push button, couplings for connections with inlet, outlet and over flow pipe, 40mm (Forty millimetres) dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately) as directed by the Engineer-Incharge, including entire carriage of materials within all leads, lifts and other incidentals.

Providing and fixing PTMT jet spray of approved quality and colour with one metre tube as directed by the Engineer-in-Charge, including entire carriage of materials within all leads, lifts and other incidentals.

Providing and fixing bright finished M.S. hydraulic door closer within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing elbow operated tap including necessary fitting complete as directed by the Engineer-in-Charge, including entire carriage of materials within all leads, lifts and other incidentals.

Providing and fixing tap including necessary fitting complete as directed by the Engineer-in-Charge, including entire carriage of materials within all leads, lifts and other incidentals.

Providing and fixing door handle round shape stainless steel ISO certified compaby 327x302x25 (Three hundre3d twenty sseven into three hundred two into twenty five ) complete fitting with necessary screws as directed by the Engineer-Incharge, including carriage of materials within all leads, lifts and other incidentals

Providing and fixing motise lock set double lock (Harison only) complete fitting with necessary screws as directed by the Engineer-Incharge, including carriage of materials within all leads, lifts and other incidentals

Providing and fixing door harison channle complete fitting with necessary screws as directed by the Engineer-Incharge, including carriage of materials within all leads, lifts and other incidentals

Providing and fixing door hinges complete fitting with necessary screws as directed by the Engineer-Incharge, including carriage of materials within all leads, lifts and other incidentals

VENYA CONSTRUCTIONS AND SUPPLIER