REPAIR AND REPLACEMENT OF ROAD FURNITURE AND MARKING OF PAINTING LINES TO OLD EXISTING ROAD SURAFCE AT SOLMARA MILITARY STATION UNDER GE (NORTH) TEZPUR

Amount

Note 1: (Applicable for all parts/items) : The bidders/contractors are advised to read tender document, all drawings & all corrigendum/amendments and general condition of contracts before entry/quoting the rates. Note 2:- Attention to bidder is hereby invited to upload revised BOQ if published during their bid submission. Uploading of incorrect/ pre-revised BOQ shall be treated as non bonafide and rejected. Fixed credit has been given in technical documents which shall be taken into account during acceptance of bid/tender.

S & F in repair dual directional reflective cat eye of impact resistanct ABS plastic stud 100X100mm having ultra violet resistant colour (white/ red/yellow) with plastic strip containing 31x2=62 mini retro reflective glass beads of colour white/red/yellow to a side provided with epoxy and steel zinc plated nail of dia 12mm and of length 120mm for fixing to road by hammering. Make: GREENS/GREENLITE , 3M, Ladwa, Adstar, Fasteck Metro plus

S & F in repair dual directional reflective cat eye of impact resistanct ABS plastic stud 120X120mm having ultra violet resistant colour white having 4x2=8 large glass lens reflectors (Tiger-eye) of colour white a side provided with epoxy and steel zinc plated nail of dia 12mm of length 120mm for fixing to road by hammering. Make: GREENS/GREENLITE , 3M, Ladwa, Adstar, Fasteck Metro plus

S & F in repair all directional reflective Sighlite Cat-eye of toughened-glass semi-spherical of diameter 60 mm having glass base of 100 mm diameter duly reflector coated and reflector protected with hard coating for fixing over the road with epoxy. Make: GREENS/GREENLITE , 3M, Ladwa, Adstar, Fasteck Metro plus

S & F in repair high intensity prismatic uni directional twin reflector delineator having two 110mm dia yellow coloured HIP intensity reflectors along with three additional HIP yellow reflectors 25x75mm over 300x165 oval shaped steel sheet 18gauge head supported over steel tube 47mm dia of 18 gauge sheet support of total height 1000mm having flared/welded foot for firm grip to base. Steel tube to have additional steel sheet plate size 150x250mm of 18gauge with yellow HIP chevron/diversion sign. All steel parts black powder coated to make all weather resistant. The same is embeded in ground with 300X300X300m size PCC of 1:2:4) including necessary excavation, the cost is included in the item. Make: GREENS/GREENLITE , 3M, Ladwa, Adstar, Fasteck Metro plus

S & F in repair high intensity prismatic uni directional twin reflector delineator having two 110mm dia yellow coloured HIP intensity reflectors along with three additional HIP yellow reflectors 25x75mm over 300x165 oval shaped steel sheet 18gauge head supported over steel tube 47mm dia of 18 gauge sheet support of total height 1000mm having flared/welded foot for firm grip to base. Steel tube to have additional steel sheet plate size 150x250mm of 18gauge with two yellow HIP to oblique strips sign. All steel parts black powder coated to make all weather resistant. The same is embeded in ground with 300X300X300m size PCC of 1:2:4) including necessary excavation, the cost is included in the item. Make: GREENS/GREENLITE , 3M, Ladwa, Adstar, Fasteck Metro plus

S & F in repair all directional retro-reflective round delineator LONG STAND POSTS made out of 12 gauge MS pipe of outer dia 110mm and of length 1200 mm. Post powder coated in black colour and having two retro reflective white bands of width 150mm as per IRC-79-1981. Reflective bands protected with welded wire mesh cage. The same is embeded in gound with 300X300X300m size PCC of 1:2:4) including necessary excavation. Make: GREENS/GREENLITE , 3M, Ladwa, Adstar, Fasteck Metro plus

S & F in repair solar road stud having 3 LEDs of colours red/ yellow to a side (total 6 Nos) housed in a tough pressure die casted aluminum alloy of any size (120 x 130 mm), (100x130mm) and (125x125mm) of height 20 mm with built in stem-nail 30 mmx 50 mm long for fixing with epoxy. LEDs, solar - cells, battery & light sensor well protected in side under tough unbreakable polycarbonate transparent sheet roof. System workable for 2-3 days (nights) after full charge in 8-10 hours. Make: GREENS/GREENLITE , 3M, Ladwa, Adstar, Fasteck Metro plus

S & F in repair solar road delineator 6 LEDs of colour red/ yellow housed in alumunium/plastic body. LEDs, solar-cells, battery and light sensor well protected inside polycarbonate sheet; device protected with powder coated wire mesh cage. System mounted over 47 mm dia steel tube powder coated of length 600 mm having sheet foot for firm grip to ground. System workable for 2-3 days (nights) after full charge for 8-10 hours. The same is embeded in ground with 300X300X300m size PCC of 1:2:4) including necessary excavation, the cost is included in the item. Make: GREENS/GREENLITE , 3M, Ladwa, Adstar, Fasteck Metro plus

S & F road signs such as mandatory, informative or warning signage boards of standarad size (2Sqft size each), with supporting fixing metal details embeded in ground with 300X300X300m size PCC (1:2:4) including necessary excavation , the cost is included in the item. The specification and size as per manufacture's instructions of Make: GREENS/GREENLITE , 3M, Ladwa, Adstar, Fasteck Metro plus

S & F road signs such as mandatory, informative or warning signage boards of standarad size (2Sqft size each), including cost of welding over existing metal sections over wall or other surface, the cost is included in the item. The specification and size as per manufacture's instructions of Make: GREENS/GREENLITE , 3M, Ladwa, Adstar, Fasteck Metro plus

S & F Road safety convex mirror of size 600mm dia having polycarbonate body, unbreakable orange colour including mountinted over metallic stand not less than 65mm dia pipe duly painted of standarad height 150cm. All steel parts black powder coated to make all weather resistant. The same is embeded in ground with 300X300X300m size PCC of 1:2:4) including necessary excavation, the cost is included in the item. Make Honesty Automation Private Limited, GREENS/GREENLITE , 3M, Ladwa, Adstar, Fasteck Metro plus or equivalent.

Material and Labour for 2mm thick Thermoplastic road marking material/Hot making paint (minimum qty of material @ 2.02 gm per Cucm) of specified shade/colour using hot process by fully/semi automatic thermplastic materials applicator machine filled with profile shoe, glass beads (minimum qty of glass beads @ 250-300 gm per Sqm) to be embedding and anchoring at a depth of 50-60% and should be pressure type system, having tank heater and profile shoe heater, driven by experienced operator on road surface including cost of all materials, labour, T&P, transportation, cleaning the road surface of all dirts, seals, oil grease, grass and foreign materials etc., complete in all respect as specified and directed. Road marking material should comply with BS 3262:Part 1:1989,AASHTO M-249,MORTH ( Ministry of Road Transport and Highways, India ) Clause 803.4.2 1, JIS K 5655 of make: IRA road marks, Asian paints (Apcomark), Automark Technologies (India) Pvt. Ltd., Metalite (Hibrite) , STP (ShaliMark)(Note:- The work shall be executed by manufactures authorised applicator only)

M/S SHYAMAL SARMAH

M/S MOHANPASARI

AVASANA SOLUTIONS PRIVATE LIMITED