Construction of RCC Drain including paver block road from Garage of Prasanta Saha to NH 8 at near Brahmabari Ward No_10 Under Udaipur Municipal Council during the year 2025_26. Total length 134.90 m.

Pumping outwater causedby springs, tidal or river seepage, broken water mains or drains and the like

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, dewatering, constructionof shoring, shuttering & bracing, removal of stumps & other deleterious material and disposal upto a leadof 50m, dressingof sides & bottom and backfilling in trenches with excavated suitable material. -All kinds of soil i) Ordinary soil ii) Upto 3m depth

Filling in foundation trenches as per drawing & MoRD technical specification Clause 305.3.9, 1200 i) Sand filling

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. -All kinds of soil

Providing concrete for plain/reinforced concrete in open foundationscomplete including formworkasperdrawings & MoRD technical specifications Clauses 802, 803, 900, 1202 and1203. (including centering, shuttering, staging etc. but excluding reinforcement). i)P.C.C grade M 10 ii) Nominal Mix 1:3:6

Plain/reinforced cement concrete in sub structure complete including formwork as per drawings & MoRD technical specification Clauses 802,804,805, 806,807, 900,1202 ,1204. (including centering, shuttering, staging etc. but excluding reinforcement) v) RCC grade M-20 (1:2:4) (Nominal Mix) i) upto 5m hight

Supplying, fitting&placing Thermo-Mechanically treated bar/Cold twisted deformed steel bar in substructure completeasper drawings&MoRDtechnical specification Clauses 1002, 1005, 1010 and 1202.

Providing weep holes in brickmasonry/stonemasonry, ain/reinforced concrete abutment, wing wall, return wall with 100mm dia AC pipe or uPVCpipe (110mm OD of 6.0 kg/cm2 pressure)extending through the full width of the structures with slope of 1(V): 20(H) towards drawing face complete as per drawing and MoRD technical specification clauses 614, 709, 1204.3.7.

Granular Sub-base with Coarse Graded Material (Table 400.2) Construction of granular sub-base by providing coarse graded material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per MoRT&H Technical Specification Clause 401

60 mm thick factory made c.c. interlocking paver block of M-35 Grade Providing and laying factory made chamfered edge Cement Concrete paver blocks of required strength, thickness & size/shape, made by table vibratory method to attain superior smooth finish using PU or equivalent moulds, laid in required grey colour& pattern over 50 mm thick compacted bed of sand, compactingand proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by usingplate vibrator, filling the joints with fine sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand in footpath, parks, lawns, drive ways or light trafficparking etc. all complete as per specifications & approval/direction of the Engineer -in-Charge