ARC for Laying of Various size of 11 KV XLPE/PILC UG Cable under ND/SI & DISS Scheme works & Maintenance of Faulty cable under jurisdiction of Tarsali Sub Division & other subdivision under CFC Lalbaug Division

ARC for Laying of Various size of 11 KV XLPE/PILC UG Cable under ND/SI & DISS Scheme works & Maintenance of Faulty cable

under jurisdiction of Tarsali Sub Division & other subdivision under CFC Lalbaug Division.

PR NO : 228170 TENDER ID: 572/25-26

Item Code No. Description of Work Unit Qty. Total value

Laying / Relaying of XLPE/PILC cable by digging of pit,

removal of old cable & laying of new cable on sand bed. The

trench should be filled with earth duly rammed upto ground

level & old cable credited to store.

Excavation of trench 0.5 Mtr. Wide and 1 mtr. Deep for laying

of HT/LT underground cable of size upto 300mm2 PILC or

XLPE. The cable should be liad on bed of sand and to cover

2 9913000036 cable with half round RCC pipe 6" internal dia and length of 1 Mtr. 148 2000

mtr along with each bottom and top. The entire trench should

threafter be refilled with earth duly rammed upto ground level.

As per Drawing no:MGVCL/Tech/UG cable/01/12-13

Excavation of trench 0.75 Mtr. Wide and 1 mtr. Deep for

laying of HT/LT underground cable of size upto 300mm2 PILC

or XLPE. The cable should be liad on bed of sand and to

cover cable with half round RCC pipe 6" internal dia and

length of 1 mtr along with each bottom and top. The entire

trench should threafter be refilled with earth duly rammed

upto ground level. As per Drawing no:MGVCL/Tech/UG

Laying/Relaying of cable in trench and from ground level to

pole structure for providing outdoor cable joints.

Additional charges for digging tar road for laying of cable over

and above digging of pits in normal soil.

ERECTION OF CABLE JOINT FOR XLPE CABLE

(STRAIGHT/INDOOR/OUTDOOR)

Moulding of cable joint (st joint, indoor & outdoor) for LT PVC

Laying of U/G 11kv XLPE cable by push & pull

method(manual/By horizontal Directional Machine) thru with

HDPE pipe 110mm DIA, 5.3 to 6 mm thickness or 4" diameter

GI pipe without damaging surface of the road by horizontal

drilling/boring method excluding cost of HDPE/GI PIPE as per

the drawing and specification.

Labour charge for unskilled labour per day for digging cable

Providing HDPE Pipe for laying of 11KV XLPE cable having

10 9913000015 size 110 mm nominal diameter and 5.3 to 6 mm thickness as RMtr. 296 2500

ARC for Laying of Various size of 11 KV XLPE/PILC UG Cable under ND/SI & DISS Scheme works & Maintenance of Faulty cable

under jurisdiction of Tarsali Sub Division & other subdivision under CFC Lalbaug Division.

PR NO : 228170 TENDER ID: 572/25-26

Providing supplying & fixing of route marker of C.C. 1:2:4

150mmx150mmX750mm concrete stone (MGVCL marked

with approved yellow colour embedded in earth atleast

11 9913000009 300mm below the ground level and 450mm above ground Nos. 143 200

level at distance of approx. 100mtr. Along the length of cable.

The rate is inclusive of material and labour for excavation and

Supply of sand 0.300x0.500X1.00mtr (Layer at bottom of

12 9913000049 cable trench approximately 0.15cmt) As perDrg.No RMtr. 114 500

MGVCL/Tech/UG Cable/01/12-13

Supply of sand 0.300x0.750X1.00mtr (Layer at bottom of

13 9913000050 cable trench approximately 0.225cmt) As perDrg.No RMtr. 172 450

MGVCL/Tech/UG Cable/02/12-13

Widening & Refilling with earth duly rammed the trench for

laying additional no. of cable For item code no.

Preparing of Digital map of underground network by capturing

15 4001000183 Geographical co-ordinates with GPS Instrument (having KM 1462 19

accuracy within 1.0 Mtr) and superimposing

Supply & laying of RCC Half round Hume pipe [6" internal dia

& each of 1mtr long]

Providing & installation of GI pipe of 4"dia, for cable size

upto 300mm2, required for protection of incoming / outgoing

cable at DTR / RMUS . including labour charges and

providing necessary clamps, bolts etc.

Total Estimated cost (A)

GST[B=A x GST%](GST Rate: 18%)

Total Tender Estimated cost including GST (in Rs.)

Bidder‟s offer (+/-) in % [B]

Grand Total [C=A+/-(A*B)

Grand Total [C=A+/-(A*B)

Goods & Service tax [D = C x GST %] (GST Rate :___%) SAC Code:

Grand Total including GST [E=C+D]

Grand Total including GST [E=C+D]

Final offer (in RS.)

Final offer (Rs. In words)

The bidder shall quote FIRM PRICES only. The prices quoted will not be subject to any escalation till completion of work.

The above prices are inclusive of all taxes, levies Duties etc. except Goods & Service tax (GST). GST will be paid extra as applicable from time to

time on a given taxable goods and/or services.

NOTE: Work for this order is for TarsaliSub Division & other subdivision under CFC Lalbaug Division.

RATE INCLUSIVE/EXCLUSIVE OF GST SHOULD BE CLEARLY MENTIONED IN YOUR QUAOTATION(MENTION IT IN

ONLINE PRICEBID ONLY)

IN SCHDULE ''B'' MENSIONED QUANTIES ARE ESTIMATED. QUANTIIES MAY BE INCREASED OR DECREASED IN EVERY

WORKS. BUT ORDER VALUE WILL NOT BE CHANGED & PAYMENT WILL DONE AS PER ACTUL EXCUSION OF WORKS

In case any joint fails within one year due to poor workmanship,it should be replaced free of cost by you else, the charges for the

same will be deducted from your bill.

For laying of double circuit, both cables should be covered with separate RCC hume pipe of 6"diameter OR Provided HDPE Pipe

for laying 11KV cable. Pipe should be 10mm thickness.

If the work of cable would not be started within six hours from verbal instruction of Engineer-in-charge from sub-division, the

penalty will be charged @ Rs.200/- per occasion.

SIGNATURE OF CONTRACTOR Executive Engineer (O&M),

(With Rubber Stamp & Date) Lalbaug Division, MGVCL