Selection of Contractor for Upgradation of Hall of Space and Hall of Science pavilion at Science City, Ahmedabad.

Demolition of brick work and stone masonry with any type of plaster, paint, skirting, dedo etc. including stacking of serviceable materials and disposal of unserviceable materials with all lead and lift. work complete including all type of tools, tackles, scaffolding, safety measures, loading, unloading, transportation, at all floors, all heights, all levels etc complete as per instruction of Architect/EIC. (III) In cement mortar.

Demolition of any type of R.C.C work with TMT bars, any type of plaster, paint, skirting, dedo etc. including stacking of serviceable materials and disposal of unserviceable materials with all lead and lift. work complete including all type of tools, tackles, scaffolding, safety measures, loading, unloading, transportation, at all floors, all heights, all levels etc complete as per instruction of Architect/EIC. (I) R.C.C work.

Dismentaling all type of tiles flooring, or stone flooring laid in mortar, any type of flooring with mortar, waterproofing, including stacking of serviceable materials and disposal of unserviceable materials with all lead and lift. work complete including all type of tools, tackles, scaffolding, safety measures, loading, unloading, transportation, at all floors, all heights, all levels etc complete as per instruction of Architect/EIC.

Dismentaling all type of wall tiles, dedo and any type of (stone/ tiles) clading laid in mortar, any type of flooring with mortar, waterproofing, including stacking of serviceable materials and disposal of unserviceable materials with all lead and lift. work complete including all type of tools, tackles, scaffolding, safety measures, loading, unloading, transportation, at all floors, all heights, all levels etc complete as per instruction of Architect/EIC.

Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials with all lead. work complete Including cost of all labour, safety measures, loading, unloading, transportation, cleaning, at all floor, all level, all depth, all Height, all lead and lift etc. work complete as per the detailed drawing, approved sample and instruction of Architect/EIC. Sample mock shall be approved from Architect/EIC.

Dismantling any type of doors, windows, ventilators etc. (wood of steel) shutters with chowkhats, architraves, holdfasts, any type of frame and other attachments etc complete and stacking them within all lead and lift. work complete including all type of tools, tackles, scaffolding, safety measures, loading, unloading, transportation, at all floors, all heights, all levels etc complete as per instruction of Architect/EIC. (i) Not exceeding 3 Sq.M in area

Dismantling any type of doors, windows, ventilators etc. (wood of steel) shutters with chowkhats, architraves, holdfasts, any type of frame and other attachments etc. work complete and stacking them within all lead and lift. work complete including all type of tools, tackles, scaffolding, safety measures, loading, unloading, transportation, at all floors, all heights, all levels etc complete as per instruction of Architect/EIC. (II) Exceeding 3 Sq.M in area

Removing dry or oil bound distemper, all type of paint and texture paint by a washing and scraping and sand papering the wall surface smooth including necessary repairs to scratches complete. work complete and stacking them within all lead and lift. work complete including all type of tools, tackles, scaffolding, safety measures, loading, unloading, transportation, at all floors, all heights, all levels etc complete as per instruction of Architect/EIC.

Removing and scraping of old deteriorated plaster of any thickness fromm wall / R.C.C member including stacking of serviceable materials and disposal of unserviceable materials with all lead and lift. work complete including all type of tools, tackles, scaffolding, safety measures, loading, unloading, transportation, at all floors, all heights, all levels etc complete as per instruction of Architect/EIC.

Scraping oil paint from steel and other metal surface and making the surface even (with Hand Scraping.)

Remove of existing Fabrication and steel structure including plates, rolled steel joists, channels, angles and all type of accessories etc. including stacking of the materials with all lead and lift. work complete including all type of tools, tackles, scaffolding, safety measures, loading, unloading, transportation, at all floors, all heights, all levels etc complete as per instruction of Architect/EIC. work completed as per existing site conditions work complete as per the instruction of EIC.

Remove of existing sanitary fittings and vessals like basin counter, wash basin, w.c. pan, Indian and Europeon type flushing tank, all type of cock, accessories, all pipe, terrace's services pipeline etc. including stacking of the materials with all lead and lift. work complete including all type of tools, tackles, scaffolding, safety measures, loading, unloading, transportation, at all floors, all heights, all levels etc complete as per instruction of Architect/EIC. work completed as per existing site conditions work complete as per the instruction of EIC.

Remove of existing all exhibits including all services : Removal of Exhibits: Complete removal of all exhibits, including MEP services, equipment, and mechanics. Material Handling: Stacking of materials with all necessary lead and lift. Include all types of tools, tackles, and scaffolding. Safety Measures: Ensure all safety protocols are followed. Logistics:Loading and unloading of materials.Transportation across all floors, heights, and levels. Compliance: Work to be completed in accordance with the instructions from the Architect/EIC and existing site conditions. The bidder has to hand over all the material to the Authority at the place suggested by the Authority

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation, trenches or drains, including dressing of sides and ramming of bottoms, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a all lead and lift. Depth up to 1.5 m

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation, trenches or drains, including dressing of sides and ramming of bottoms, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a all lead and lift. Depth from 1.5 m to 3.0 m

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers of 20cm. Thickness including watering, ramming and consolidating, as per specifications, etc. complete.

Supplying and filling approved quality sand in plinth, trenches, under floors etc., in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming (mechanically or manually), watering, ramming, consolidating and dressing etc. complete. for using approved quality silt free natural River Sand

Providing and laying 230mm or any thick dry rubble soling using locally available approved quality stones, hand laid, well rammed, watered and consolidated, including filling the gaps/interstices/voids using quarry spalls and/or hand broken metal or shingle and blinding the same with stone grit murum, etc., compaction with mechanical/vibratory roller etc. complete as directed by the DTA/Authority. Note : Short creating work shall be done by civil contractor for soil slop stability if required in some locations. Shoring and struting rate shall not be paid extra and shall be under of scope of contractor only.

Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- graded stone aggregates 20 mm nominal size) and curing complete excluding cost of formwork in (A) Foundation and Plinth

Providing and laying controlled cement concrete M.250 and curing complete. including mixing laying, vibrating, consolidating, leveling and curing etc. complete with all labours and materials. The item includes finishing the top surface with trowel, necessary admixtures etc. Work complete including all type of tools, tackles, labours, safety measures, loading, unloading, transportation, at all floors, all heights, all levels, all leads and lifts etc complete as per instruction of Architect/EIC. (excluding the cost of reinforcement and formwork) (A) Foundations, footings, Base of columns and Mass concrete.

Providing and laying controlled cement concrete M.250 and curing complete. including mixing laying, vibrating, consolidating, leveling and curing etc. complete with all labours and materials. The item includes finishing the top surface with trowel, necessary admixtures etc. Work complete including all type of tools, tackles, labours, safety measures, loading, unloading, transportation, at all floors, all heights, all levels, all leads and lifts etc complete as per instruction of Architect/EIC. (excluding the cost of reinforcement and formwork) (C) Slabs, landing, shelves, Balconies, Lintels, Beams, Girders and Cantilever upto floor two level.

Providing and laying controlled cement concrete M.250 and curing complete. including mixing laying, vibrating, consolidating, leveling and curing etc. complete with all labours and materials. The item includes finishing the top surface with trowel, necessary admixtures etc. Work complete including all type of tools, tackles, labours, safety measures, loading, unloading, transportation, at all floors, all heights, all levels, all leads and lifts etc complete as per instruction of Architect/EIC. (excluding the cost of reinforcement and formwork) (D) Columns, Pillars posts and struts, upto floor two level.

TMT Bars: Providing, straightening, cutting, bending, binding and laying in position of TMT FE 500/500D grade steel reinforcement confirming to IS 1786 : 1990 or latest code, to correct all shape and size as per detailed drawings, specifications for all RCC work etc, at all levels and all heights with necessary chairs and laps; with correct size PVC cover blocks or approved quality concrete cover blocks of same grade of concrete and binding wire of 18 gauge etc. complete with test certificate of the steel bars from manufactures as well as approved laboratory test certificates directed by Engineer in charge, etc. complete. Rate shall be inclusive of binding wire, cover, lap, chair etc. Work shall complete up to any levels, all floor and as per the instruction of EIC.

Providing formwork with sheathing steel sheets so as to give a fair finish including centering shuttering strutting and propping etc. Height of propping and centering below supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete work in. (A) Foundations Footings Bases of Columns etc. and Mass concrete.

Providing formwork with sheathing steel sheets so as to give a fair finish including centering shuttering strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete work in. (G) Columns PillarsPosts and struts. (1) Square Rectangular Polygonal in plan.

Providing formwork with sheathing steel sheets so as to give a fair finish including centering shuttering strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete work in. (H) (2) Sides and soffits of Beams Beam Haunchings canti-levers Girders Bressumers and Lintels exceeding 1M.in Depth.

Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand)(B) Conventional

Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in superstructure above plinth level upto floor two level in Cement Mortar 1:6 (1- Cement : 6 -fine sand)(B) Conventional

Providing and laying Half brick masonry 115 mm thick in common burnt clay building bricks having crushing strength not less than 35 Kg./Sq. Cm. in cement mortar 1:4 (1 cement : 4 coarse sand) in superstructure - at all floor levels including proper filling of all masonry joints, curing etc. complete.(II)Conventional

Providing 10mm thick cement plaster in single coat on brick/concrete walls for interior plastering upto floor two level and finished even and smooth in (i)Cement mortar 1:3 (1-cement:3-sand) for Toilet Dedo based coat plaster

Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or half brick walls for interior plastering upto floor two level and finished even and smooth in (ii) Cement mortar 1:4 (1-cement :4-sand) including finishing with a floating coat of neat cement slurry. including groove, scaffolding, safety measures, curing etc. complete. for interior wall and Ceiling plaster

20mm thick sand faced cement plaster on walls up to height 10mt above ground level consisting of 12 mm thick backing coat of C.M. 1 : 3 (1- Cement: 3 -Sand) and 8 mm thick finishing coat of C.M. 1 : 1 (1-Cement : 1-Sand) etc. complete. including groove, scaffolding, safety measures, curing etc. complete. for Exterior plaster

Applying two coats of acrylic lapy (putty) and two coats of primer of approved brand and manufacture on new wall surface to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth.

Interior paint for wall and Ceiling: Providing and laying of three coats with premium/ Royale Emulsion paint (soft sheen, with teflon paint) as per approved make in shades and colour as directed on wall surfaces to give an even shade incl. scaffolding to at any height with all labour and material after thoroughly brushing the surface and making free from mortar dropings and other foreign matter including surface preparation etc.complete. Including cost of all type of tools, tackles, all labour, materials, transportation, cleaning , at all floor, all level, all depth, all Height, all lead and lift, performance waranty certificate etc. work complete as per the detailed drawing, approved sample, specifications and instruction of DTA/Authority. Sample mock shall be approved from DTA/Authority. Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.

Exterior Paint : Providing and Finishing Premium acrylic emulsion paint for exterior surface paint with approved brand and manufacture to give an even and smooth shade of color of approved shade after thoroughly cleaning the walls by water and brushing to remove all dirt and remains of loose materials, up to all level above plinth complete, scaffolding to any height, curing etc complete. Including cost of all type of tools, tackles, all labour, materials, transportation, cleaning, at all floor, all level, all depth, all Height, all lead and lift, performance waranty certificate etc. work complete as per the detailed drawing, approved sample, specifications and instruction of DTA/Authority. Sample mock shall be approved from DTA/Authority. Finishing walls with 100percentage Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali and fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm.

Metal Paint : ( premium gloss enamel): Providing and Finishing Apcolite premium gloss enamel paint for Metal surface with approved brand and manufacture to give an even and smooth shade of color of approved shade. Surface Preparation : Remove of existing paint on Truss area , after thoroughly cleaning and brushing to remove all dirt and remains of loose materials, up to all level above plinth complete, scaffolding to any height, curing etc complete. Including cost of all type of tools, tackles, all labour, materials, transportation, cleaning, at all floor, all level, all depth, all Height, all lead and lift, performance waranty certificate etc. work complete as per the detailed drawing, approved sample, specifications and instruction of DTA/Authority. Sample mock shall be approved from DTA/Authority. Preparation : 1 coat of Primer( Primer Coat) + 2 Coats of Paint (Apcolite enamel)

Providing and injecting pre-constructional anti-termite treatment as per IS:6313 (Part-II) to the RCC members in immediate contact with soil upto a min depth of measured from made up ground level by treating all four sides at the rate of 7 Lit/Sqm of an emulsion in water of 0.5 percentage Chloripyrofos 20 EC or equivalent,treating the top surface of plinth filling and the external peripheri of the building by drilling the holes up to 75 mm deep at 150 mm c/c distance bothways using 12 mm dia ms rod on the surface to facilitate saturation of the soil with the chemical emulsion at the rate of 5 Lit/Sqm of surface area of an emulsion in water of 0.5 percentage Chloripyrofos 20 EC or equivalent. The contractor shall furnish 10 years guarantee for termite free structure. (Plan area at ground floor level shall be measured for payment.)Notes:1) Allow for Min. of 10 years gaurantee as described under detailed specifications. 2) Only single time Plinth area shall be measured for payment, deducting open to sky shafts,verandah etc. for all kinds of buildings i.e. building having basements or no basements.

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.

Terrace waterproofing : On Floor: Providing and Applying of waterproofing treatment in terrace area as per below specification. Cleaning of existing Terrace +Surface and Crack filling: Carry out crack filling wherever required. Big cracks can be filled with Cement: Fine sand in ratio 1:3 or by using suitable exterior durable, polymer + cement-based crack filling compound of a reputed brand. Fill the hairline cracks up to 3 mm thickness with Asian Paints Smart Care Crack Seal by applying one coat of exterior primer and two coats of Crack Seal on the cracks. Intercut interval between these coats should be min. 10 – 12 hrs. Big joint cracks (up to 40 mm width) can be filled with Asian Paints Hybrid PU Sealant Damp Proof /Damp proof Ultra Application: - ▪ Apply one coat of Asian paints SmartCare Damp proof With 25percentage dilution by water with the help of Asian paints Smart Care Roller 800 as a priming coat ▪ Allow it to dry for 4-6 hrs.in clear sun light. ▪ Apply second coat of Asian Paints Smart Care Damp Proof/Ultra Without Dilution with the help of Asian Paints Smart Care Exterior Roller 800. ▪ Apply third Coat of Asian paints SmartCare Damp Proof/Ultra Without dilution with the help of Asian paints Smart Care Exterior roller 800. ▪ Allow it to dry for 4-6 hrs.in clear sun light. The whole work is to be executed through specialized agency with a guarantee of 10 years given on a prescribed proforma duly stamped. The waterproofing work 10percentage will be retained from the billing amount for 5 years (without interest). The amount shall be refunded after Five years without interest. work complete including all type of tools, tackles, scaffolding, safety measures etc complete at any level and height. work complete as per the instuction of EIC/Client/Architect.

Providing and laying mirror polished Kota stone slab flooring over 20mm (Average) thick base of cement mortar 1:6 (1-cement : 6- coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing etc. complete. (A) 25mm thick : size 600 x 600 mm

Providing and laying mirror polished kota stone slab 25mm thick in risers of steps,skirting Dedo and pillars laid on 10mm thick cement mortar 1:3 (1-cement : 3 coarse sand) and jointed with gray cement slury mixed with pigment to match the shade of slab including rubbing and polishing etc. complete.

Providing and laying 25 mm thick 300 x 300 mm Grey Cement Mosaic Tile in flooring as per approved make and sample by Architect. Fixing on a bed of 12mm thick cement mortar 1:3 (1-cement : 3- coarse sand ) finishing with flush pointing in white cement.

Vitrified Tile Flooring : Providing and laying Vitrified tiles flooring using minimum 10 mm thick tiles of as per approved make list by DTA/Authority, including preparing base for leveling with 20mm thick cement mortar 1:6 (1 cement : 6 coarse sand) and jointed with 3mm thick epoxy grouting as per approved make of approved shade and colour in proper line and level as per detailed drawing/ instruction and approval by DTA. The rate shall be inclusive of protecting the flooring by plaster of Paris applying and after completion of work remove or 4 mm thick protection sheet of Supreme make EPE+HM Blue. Including cost of all type of tools, tackles, all labour, materials, transportation, cleaning, at all floor, all level, all depth, all Height, all lead and lift, work complete as per the detailed drawing, approved sample, specifications and instruction of DTA/Authority. Sample mock shall be approved from DTA/Authority. (A) Tile size: 600x600mm, Basic rate of tile is Rs. 40/Sqft

Vitrified Tile Skirting/Dedo : Providing and laying Vitrified tiles in skirting/dedo using minimum 10 mm thick tiles as per approved make list by DTA /Authority fixed in skirting/ dado on 10 mm th. Cement plaster 1:3 (1 cement: 3 coarse sand) All surfaces must be dimensionally stable according to level, cured, undamaged, compact,rigid, resistant, dry and free from any debonding agents tiles fixed by approved tile adhesive and all application shall be done under instruction of manufacturer guideline and specification, and jointed with 3mm thick epoxy grouting as per approved make of approved shade and colour in proper line and level as per detailed drawing/ instruction all complete as per approved sample by DTA, drawings and instruction of Authority. Including cost of all type of tools, tackles, all labour, materials, transportation, cleaning, at all floor, all level, all depth, all Height, all lead and lift, work complete as per the detailed drawing, approved sample, specifications and instruction of DTA/Authority. Sample mock shall be approved from DTA/Authority. Tile size: 600x1200mm, Basic rate of tiles is Rs.40/Sq.ft

Granite flooring : Providing and laying Polished Granite (Berry Grey) stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the Architectural drawings with 17/18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) / Polymer modified mortar laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment/ Polymer modified mortar of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.Work shall complete includes all type of tools,tackles, all level and Height, labour etc complete as per the detailed drawing and instruction of Authority. Basic rate of Granite : Rs. 65/ Sq.ft

Granite flooring( Leather finish) external otla : Do as per above specification for complete work. Basic rate of Granite : Rs. 65/ Sq.ft

Granite Stone work : Steel Gray Granite: Do as per above specification for complete work. Basic rate of Granite : Rs. 80/ Sq.ft

Granite flooring (Staircase area) : Providing and laying Polished Granite (Berry Grey) stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the DTAural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) / Polymer modified mortar laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment/ Polymer modified mortar of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.Work shall complete includes all type of tools,tackles, all level and Height, labour etc complete as per the detailed drawing and instruction of Authority. Basic rate of Granite : Rs. 65/ Sq.ft

Item Description

Carpet Flooring Work: Providing and laying carpet flooring as per approved make and Sample by DTA. A ) Carpet Roll Yarn 100 percentage Olefin ( Solution Dyed ) , B ) Yarn Weight 23 0z/ SYD or 650 gm/ SQ MT C ) Stitch Rate 42/10 CM D ) Thickness of Tile 6 MM E ) Density Of Yarn 165480/sqm F ) Static Generation <3KV(AATC-134)G ) Use Classifications Commercial H ) International Fire Classifications (ASTM D 2859-Pass 8/8) I ) Guarantee 5 Years J ) Size of Roll 3.66 MT X 30 MTS - 35 MTS Carpet fixed with SR 505 Pidilite tile adhesive and underlay foam material. carpet should be laid as closure to each other.Contractor will take care for level matching with other area flooring. Scope includes labour, under lay material, disposal of debris, necessary cutting of tiles without damaging the edges, including to provide and fixing of SS 304 finish end profile , skirting ,edge profile etc to protect and cleaning, etc. complete. All works are carried as per detail drawing / instruction of DTA / Authority. Before laying carpet contractor shall prepare even surface as per required. basic rate of carpet is Rs. 110/ Sq.ft

Vinyl flooring : 2.00 mm thick : Providing and laying of minimum 2 mm thick Vinyl flooring of as per approved make and shade as per approved sample. Flooring shall be laid on existing levelled, clean and dry surface and as per manufacture’s guideline. Make : Polyflor UK , Range : XL PU , Flooring Type : Homogeneous , Roll Size : 2 MT X 20 MT , Thickness : 2 MM Weight per Sq. MT. : 3200 Grams/m2 , Top Coating : PU Finish , Fire Rating : Class Bfl-S1 , Impact Sound Reduction : 4dB Static Electrical Propensity : ≤2.0kV Classified as 'antistatic .Green Tag : LCA Rate Gold Plus Level A+ Recyclable : 100 percentage Indoor Air Quality : Eurofins Certified Product . Work including Glue + Welding Rod+ Covings etc all type of fixing material . work complete including all type of fittings, fixing, fixtures, accessories, tools, tackles, scaffolding , anchoring, silicon seal, epoxy grouting, insets plates, at all floor, all level, all depth, all Height, all lead and lift, mock up sample etc complete as per the detailed drawing and Instruction of Authority.

Granite Basin Counter: Providing and fixing two layers of wash basin counter, first layer using 25mm thick Kotastone of approved shade and second layer using approved shade and sample of 18 mm thick Mirror finish Granite, joined together with 1:4 Cement mortar bedding / approved tile adhesive, to true plane and level or to slopes, or close jointed with cement slurry with pigment of matching shade and colour and finishing with the same, including dedo 1'6", cutting kotah and tile as per required shape and size to fit Wash basin and 4" facia with moulding, nosing, chamfered front edges, fixing, disposal of debris etc. finished as per design in detail drawing and instruction of DTA/Authority. sample mock shall be approved from DTA/Authority. Basic rate of stone is 65/- Sq.ft

Single Leaf Flush Door finish with both side VNR laminate: Providing and fixing in position 40 mm thick BWP grade single leaf flush doors of approved make and finished with both side 1 mm thick VNR laminate as approved sample, necessary SS 304 grade Hardware as per approved make and Sample work complete including all type of hardware, fittings, fixtures as per instruction of Authority/ DTA etc complete as per detailed drawings and specifications. sample mock shall be approved from DTA/Authority. Laminate: VNR Series Laminate. Hardware: Dormakaba make or as per approved make list. • dormakaba 3090F2, 5 Knuckle, 2 Ball bearing butt hinges size 4" x 3" x 3mm, in SS 304 and in SSS finish. Suitable for wooden door weighs upto 120kgs. Template Drilled Approved to EN 1935 , Durability - 200,000 Cycles, Corrosion Resistance - Very High • dormakaba ITS 96 cam action door closer designed for barrier free access designed cam action door closer complying to BS 8300 and ADM opening force of below 30N between 0º and 30º degrees and below 22.5N between 30º and 60º degrees.Complies to CEN 15894 Guidelines of 40percentage reduced opening force and minimum 65percentage door closer efficiency. Door closer with slide channel arm, for concealed fixing adjustable closing speed in two independent ranges. closing force infinitely Variable between size EN 2 and EN 4. Non-handed. Approved to EN 1154 and CERTIFIRE, CE Marked,EPD.Weight upto 130 Kgs. Durability - 500,000 Cycles, Corrosive Resistance - Very High. Finish: Silver • Mortice dead lock 378a with 55mm backset, 20mm square forend, prepared for euro profile cylinder including strike plate in satin stainless steel as per EN 12209, Durability - 200,000 Cycles, Load on Latch Bolt - 120N , Door mass - 200 kg, Corrosive resistance - Very High ( - 20 C to +80 C) • dormakaba DEC 6Plus 6 Pin Euro Profile Double Cylinder with Both side Key operation Under Master Key System.Total Length is equals to 60mm (30mm+30mm)Change Keys - 3 Nos.Finish - Nickel Plated • CR 6612 escutcheons prepared for euro profile cylinder suitable for dead lock in satin stainless steel. • dormakaba pull Handle TGDI-H 1000 back to back with 850mm CTC, adjustable fixing for glass, wood and metal doors in satin stainless steel. The pull handles should have supporting washer with raised bevelling on the outer surface. Length - 1000mm, 38mm dia, Material - SS304 dormakaba floor stop half dome with 45mm dia with fixing accessories, in satin Chrome

Single Leaf Flush Door finish with laminate (Toilet door): Providing and fixing in position 40 mm thick BWP grade single leaf flush doors of approved make and finished with both side 1 mm thick VNR laminate as approved sample, necessary SS 304 grade Hardware as per approved make and Sample work complete including all type of hardware, fittings, fixtures as per instruction of Authority/ DTA etc complete as per detailed drawings and specifications. sample mock shall be approved from DTA/Authority. Laminate: VNR Series Laminate. Hardware: Dormakaba make or as per approved make list. • dormakaba 3090F2, 5 Knuckle, 2 Ball bearing butt hinges size 4" x 3" x 3mm, in SS 304 and in SSS finish. Suitable for wooden door weighs upto 120kgs. Template Drilled Approved to EN 1935 , Durability - 200,000 Cycles, Corrosion Resistance - Very High • dormakaba ITS 96 cam action door closer designed for barrier free access designed cam action door closer complying to BS 8300 and ADM opening force of below 30N between 0º and 30º degrees and below 22.5N between 30º and 60º degrees.Complies to CEN 15894 Guidelines of 40percentage reduced opening force and minimum 65percentage door closer efficiency. Door closer with slide channel arm, for concealed fixing adjustable closing speed in two independent ranges. closing force infinitely Variable between size EN 2 and EN 4. Non-handed. Approved to EN 1154 and CERTIFIRE, CE Marked,EPD.Weight upto 130 Kgs. Durability - 500,000 Cycles, Corrosive Resistance - Very High. Finish: Silver • Mortice dead lock 378a with 55mm backset, 20mm square forend, prepared for euro profile cylinder including strike plate in satin stainless steel as per EN 12209, Durability - 200,000 Cycles, Load on Latch Bolt - 120N , Door mass - 200 kg, Corrosive resistance - Very High ( - 20 C to +80 C) • dormakaba DEC 6Plus 6 Pin Euro Profile Double Cylinder with Both side Key operation Under Master Key System.Total Length is equals to 60mm (30mm+30mm)Change Keys - 3 Nos.Finish - Nickel Plated • CR 6612 escutcheons prepared for euro profile cylinder suitable for dead lock in satin stainless steel. • dormakaba pull Handle TGDI-H 1000 back to back with 850mm CTC, adjustable fixing for glass, wood and metal doors in satin stainless steel. The pull handles should have supporting washer with raised bevelling on the outer surface. Length - 1000mm, 38mm dia, Material - SS304 dormakaba floor stop half dome with 45mm dia with fixing accessories, in satin Chrome

Single Leaf Flush Door with both side VNR laminate finish With Horizontal Grab Bar (Handicap toilet) Providing and fixing in position 40 mm thick BWP grade single leaf flush doors of approved make and finished with both side 1 mm thick VNR laminate as approved sample, necessary Hardware as per approved make and Sample work complete including all type of hardware, fittings, fixtures as per instruction of Authority/ DTA etc complete as per detailed drawings and specifications. sample mock shall be approved from DTA/Authority. Laminate: VNR Series Laminate. Hardware: Dormakaba make or as per approved make list. • dormakaba 3090F2, 5 Knuckle, 2 Ball bearing butt hinges size 4" x 3" x 3mm, in SS 304 and in SSS finish. Suitable for wooden door weighs upto 120kgs. Template Drilled Approved to EN 1935 , Durability - 200,000 Cycles, Corrosion Resistance - Very High • dormakaba ITS 96 cam action door closer designed for barrier free access designed cam action door closer complying to BS 8300 and ADM opening force of below 30N between 0º and 30º degrees and below 22.5N between 30º and 60º degrees.Complies to CEN 15894 Guidelines of 40percentage reduced opening force and minimum 65percentage door closer efficiency. Door closer with slide channel arm, for concealed fixing adjustable closing speed in two independent ranges. closing force infinitely Variable between size EN 2 and EN 4. Non-handed. Approved to EN 1154 and CERTIFIRE, CE Marked,EPD.Weight upto 130 Kgs. Durability - 500,000 Cycles, Corrosive Resistance - Very High. Finish: Silver • Mortice dead lock 378a with 55mm backset, 20mm square forend, prepared for euro profile cylinder including strike plate in satin stainless steel as per EN 12209, Durability - 200,000 Cycles, Load on Latch Bolt - 120N , Door mass - 200 kg, Corrosive resistance - Very High ( - 20 C to +80 C) • dormakaba DEC 6Plus 6 Pin Euro Profile Double Cylinder with Both side Key operation Under Master Key System.Total Length is equals to 60mm (30mm+30mm)Change Keys - 3 Nos.Finish - Nickel Plated • CR 6612 escutcheons prepared for euro profile cylinder suitable for dead lock in satin stainless steel. • dormakaba pull Handle TGDI-H 1000 back to back with 850mm CTC, adjustable fixing for glass, wood and metal doors in satin stainless steel. The pull handles should have supporting washer with raised bevelling on the outer surface. Length - 1000mm, 38mm dia, Material - SS304 dormakaba floor stop half dome with 45mm dia with fixing accessories, in satin Chrome

Double Leaf Alluminium heavy duty frame glass door : Main Entrance : 2400 x 3000 mm Providing and Fixing of Alluminium heavy duty frame glass door comprising from 12 mm thick toughened glass door with necessary ss 304 grade hardware and accessories complete as per approved make and sample by DTA. work complete including all type of hardware, fittings, fixtures as per instruction of Authority/ DTA etc complete as per detailed drawings and specifications. sample mock shall be approved from DTA/Authority. Hardware: Hafele make or as per approved make list. FS 2104 Double Action Floor Spring with 90° Hold Open and SS Cover plate, Size 4 (Without accessories), Max. door leaf weight 120kg ,SS Matt,For door widths 1000-1200mm Double Action accessories for Floor Spring suitable for Timber doors Narrow Dead Lock BS 30mm C/C 92mm 24mm Forend SS 304 SSM Euro Profile Double Cylinder 40+40 is equals to 80mm Brass SN EPC Escutcheon Oval SS 304 SSM D Crank Pull Handle 22mm Dia 300mm C/C Glass / Wood Door Max. Door Thickness - 50mm SS 304 SSM FLush Bolt for Metal Door 304mm SS 304 SSM Flush Bolt for Metal Door 600mm SS 304 SSM Dust Proof Strike SS 304 NM Floor Mounted Door Stopper Half Round SS 304 SSM

Single Leaf Glass Door: Supply and Installation of Modular Aluminium Glass door frame of Kubik 45mm System, Using KOPS 001 and KOPS DF 103 ( 45mm x 25mm) for Glass door frame Doorframe Dimension – 45mm x 25mm. Finish – SILVER finish / Powder coating as per approved sample by Architect 10mm thk. clear thoughened Glass KUBIK Glass Hinge , HAFELE Open Door closer with saddel plate , KUBIK Mortise lock with handle , KUBIK Door stoper etc complete Work complete including all type of material, fittings , fixtures,Finish, loading , unloading , transporation, all leads ,accessories, sample mockup, all floor , all levels, all heights , necessary frame work,Scafffolding , safety measures etc complete as per detailed drawings ,specifications and instruction of Client/EIC.

Double Leaf Glass Door: Supply and Installation of Modular Aluminium Glass door frame of Kubik 45mm System, Using KOPS 001 and KOPS DF 103 ( 45mm x 25mm) for Glass door frame Doorframe Dimension – 45mm x 25mm. Finish – SILVER finish / Powder coating as per approved sample by Architect. 10mm thk. clear thoughened Glass KUBIK Glass Hinge, HAFELE Open Door closer with saddel plate, KUBIK Mortise lock with handle, KUBIK Door stoper etc complete. Work complete including all type of material, fittings , fixtures,Finish, loading , unloading , transporation, all leads ,accessories, sample mockup, all floor , all levels, all heights ,, safety measures , necessary frame work,Scafffolding etc complete as per detailed drawings ,specifications and instruction of Client/EIC.

Accoustic door - Double leaf flush door with Fire rated: Providing and fixing of Acoustic Fire Door Shutter Thickness - 75 mm Fire Resisting Duration/ STC - 2 Hour (STC 50 db) Door Leaf - Double Frame required - yes Frame Section - 140mm X 70mm Frame material and Finish - FR Painted RMT of Frame - as required Area of Shutter - as required Door Finish including pasting, handling and cutting charges - Both side Laminated Hardware and Accessories: -SS 304 grade SS Hinges - 4" Fire Rated X 8 nos Door Closing Mechanism/ Door Closer Auto Drop Seal (double) Perimetric seals all around of door Tower Bolt - 12" Single Pc S.S. Handles - Size - 12" Both Side work complete including all type of hardware, fittings, fixtures as per instruction of Authority/ DTA etc complete as per detailed drawings and specifications. sample mock shall be approved from DTA/Authority.

Double Leaf Metal door with view panel( 2 hr Fire rated) : 1800 x 2400 Providing and fixing of door as per approved make and sample by DTA/Authority. Door Shutter : Sheet is equals to 20 gauge (1.0 mm) GI sheet; Door thickness: 46 mm; Pad plates: 3 mm Infill material: Rockwool 64kg/m3; Stiffeneres: 1.0 mm GI sheet Door frame: Sheet: 18 gauge (1.2 mm ) GI sheet Profile Size is equals to 100x57 Rabet : Single Rabbet Assambly: Tree piece bolted butt joint. Pad plates: 3 mm Frame grouting : 0 mm Wall Type : Brick / RCC wall Fasteners : 10x95 Hilti HUD. Finish: Electro static powder coating Powder type:Pure Polyster Colour shade:as per Approved sample Accessories: Hinges:S.S. ball bearing 103x76x3mm with M5x15 screw , Single point locking Panic bar touchbar type : Extrenal Trim lock with lever handle and lock cylinder ZN03L , Glass Panel: 200x300x6 mm clear fire glass with frames: Schott e-120 , Door Closer: 80 kg / 1200 mm capacity Heavy duty doors closer : 2-4F work complete including all type of hardware, fittings , fixtures as per instruction of Authority/ DTA etc complete as per detailed drawings and specifications. sample mock shall be approved from DTA/Authority.

WPC shutter with laminate finish(Duct area): Providing and fixing in position 12 mm thick WPC shutter of approved make with VNR laminate finish as approved, shutter fixed with floor and above pivot of approved make , pivot cover plate, safety measures , lock and handle etc fixtures of approved make list with all necessary fittings etc. aluminium frame as per required size Complete as per detailed drawings and specifications.

Providing and fixing standared extruded of alluminium section of size 63mm x 38.10mm x 1.2mm (Jindal Section :2434, @ Wt. 0.643 Kg/mt) with colour Powder Coated alluminium frame for ventilation with 5 mm thick frosted glass and provision of exhaust fan as details etc complete for Ventilation

Sliding window : (Domal 27 mm series) Supply and Fixing of Aluminium sliding window with powder coated as per by approved make and sample by DTA/Authority. frame section: 45 x 45x 1.5 mm Shutter section : 65 x 27 x 1.4 mm Glass : 5 mm thick reflective toughened glass of saint gobain or approved make list including concealed lock, albose, other necessary fixtures and fastening, PVDF rollers, EPDN gasket, silicon sealent etc. complete as per detailed drawings, mock sample and specifications.

Fixed Glass Aluminium Window: Domal section : R40 mm series Supply and Fixing Fixed glass window Comprising from Domal section series R40 mm series with powder coated as per approved make and sample by Architect/EIC. Frame section: 40 x 39.4 x 1.25 mm Glass : 5 mm thick clear reflective toughened glass of saint gobain or approved make list including EPDM Gasket and All Necessary Hardware etc. complete as per detailed drawings, mock sample and specifications.

Mosquito Jali : Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm With 12 mm mild steel U beading all complete.

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Handicap toilet EWC and all accessories: Providing and fixing Handicap toilet vessels as per approved make, like EWC, cistern tank, control plate, wash basin, one hinged rail, 4 nos of grab rail, grab bar vertical swing-satin, including all type of fixtures, fittings, P or S trap, seat cover, pair of mounting bracket etc complete as per instruction of Architect/EIC. Rate shall be inclusive of all materials, loading, unloading, transportation, placing at all floors and for all leads,etc complete as per detailed drawing and Instruction of Architect/EIC. Model: WC - DISWHT- 93951UF, Basin - DIS-WHT-93801, Grab Bar - WAC-SAPBG0800CS, Grab bar - WAC-SAPBR0600CSN, Cistern tank - JCSWHT- 2431FS, Control Plate Opal - JCPCHR-152415.

Soap Dispensor : Providing and fixing liquid soap Dispensor of best quality. Complete as per directed by architect and engineer in charge. Euronics code Manual Soap Dispenser (1000ml) ES43

Hand Dryer: Providing and Fixing Electrical hand dryer, fully automatic type , cover shall be fabricated in ABS material finished, the unit shall deliver of hot air and electrical rating shall be 240 V / 1 phase / 50 cycles. Complete as per directed by architect and engineer in charge. Euronics code : Euronics of EH270N

Fragrance Dispenser : Providing and fixing Automatic Fragrance Dispenser Complete as per directed by architect and engineer in charge.

Toilet Cubical : Model Type: Greenlam Sturdo Essentia Seren : Thickness of Compact Laminate : 12mm Nos 1 32075 32075 . Door : 600mm*1785mm , Divider Height : 1820mm , Overall height : 1995mm (Including 150mm Ground clearance) Supply and Installation of Toilet Cubicles as per approved make and sample by DTA . 12 mm Compact Grade 1.5 mm thick laminateBoard of the approved shade by DTA . Accessories for cubicles.1. Aluminum “U” Section with a) Aluminum U Channel b) Nylon Gravity hinges c) Nylon Coat Hook d) Nylon Adjustable Leg e) Nylon Door Knob f) Nylon Thumb Turm Indicator g) Aluminium Door Stopper Channel h) Aluminium Top Rail e) Screws, Wall Plugs and Noise Tape Etc. Work complete including all type of fittings, fixtures, tools, etc complete as per manufacturer specification and drawing.

Mirror: Providing and fixing Mirror with aluminium frame in which Aluminium frame with special deep colour anodise 40mm width and 1.3mm thickness and 5mm mirror fitted using high grade silicon. Work complete including all type of tools, tackles, scaffolding, safety measures, loading, unloading, transportation, at all floors, all heights, all levels etc complete as per instruction of DTA/Authority.

Urinal Partition: Providing and fixing natural stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep (or as per drawing) and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth.

Providing and fixing of Washroom Panel/Recessed/S.Steel (2in1,Paper Dispenser / Waste Receptacle) - Mini, Model no KPD3S of Euronics or approved make list . Work complete including all type of fittings, fixtures, tools, etc complete as per manufacturer specification and drawing.

Providing and fixing of Sanitary Napkin Hygiene Panel (3in1) - For Feminine Washroom : Model no ESN03S of Euronics or approved make list . Work complete including all type of fittings, fixtures, tools, etc complete as per manufacturer specification and drawing.

Railing : Top Mounted Round Baluster System : Staircase Design, Supply, Installation of Railing as per apprved make and sample by DTA/ Authority. Supply and installation of KICH PR make 304 Grade Stainless Steel Modular railing system comprising Ø 42.4mm Handrail fixed on Ø 42.4mm S.S. Plain Round baluster (Design Code ABT223-1) placed at maximum 1200mm c/c . The balustrade would be fixed onto floor with base plate of minimum 8mm thickness (Ø100x8mm Base SS 202 Grade Base Plate) . Base plate shall be concealed with suitable S.S. 304 grade cover Cap so that the mounting Hilti GI M10x100mm Anchor fasteners are not visible after installation. Wall thickness of Handrail and Baluster Pipes shall be taken as 1.5mm along with all visible components developed in High Grade S.S. and whenever required. Railing height to be taken @ 400mm from floor level. Work complete including all type of material, anchor fastening, fittings , fixtures, Finish, loading , unloading , safety measures , transportation, all leads ,accessories, sample mockup, all floor , all levels, all heights etc complete as per detailed drawings ,specifications and instruction of Authority/Authority. sample mock shall be approved from DTA/Authority.

Railing : Wall Mounted Railing system : Staircase Design, Supply, Installation of Railing as per apprved make and sample by DTA/ Authority. Supply and installation of KICH PR make 304 Grade Stainless Steel Modular Wall mounted Railing system comprising Ø50mm Handrail mounted on the wall through Wall Brackets of Ø19x1.2mm and anchor fasteners which will be placed at maximum 1200mm c/c distance and as per site requirement. Wall thickness of all Pipes shall be taken as 1.5mm along with all visible components developed in High Grade S.S. and whenever required, joints to be filled with bushings for extra strength.height of railing - 927 mm From floor level Work complete including all type of material, anchor fastening, fittings , fixtures, Finish, loading , unloading , safety measures , transportation, all leads ,accessories, sample mockup, all floor , all levels, all heights etc complete as per detailed drawings ,specifications and instruction of Authority/Authority. sample mock shall be approved from DTA/Authority.

Railing : Top Mounted Round Baluster System With Horizontal Members : PYRAMID (FF) Design, Supply, Installation of Railing as per apprved make and sample by DTA/ Authority. Supply and installation of KICH PR make 304 Grade Stainless Steel Modular railing system comprising Ø 50mm Handrail fixed on 40mm X 40 mm S.S. Square baluster (Design Code ABT241-1-DGLS) with Double glass holding Bracket accessories (including top bracket to hold hand railing), placed at maximum 1200mm c/c along with 12mm thick toughened glass connected with baluster with special glass holding fixtures. The Glass height should be taken as minimum 650mm. The balustrade would be fixed onto floor with base plate of minimum 8mm thickness(100x100x8mm Base SS 202 Grade Base Plate). Base plate shall be concealed with suitable S.S. 304 grade cover Cap so that the mounting Hilti GI M10x100mm Anchor fasteners are not visible after installation. Wall thickness of all Pipes shall be taken as 1.5mm along with all visible components developed in High Grade S.S. Railing height to be taken @ 927mm from floor level. Work complete including all type of material, anchor fastening, fittings , fixtures, Finish, loading , unloading , safety measures , transportation, all leads ,accessories, sample mockup, all floor , all levels, all heights etc complete as per detailed drawings ,specifications and instruction of Authority/Authority. sample mock shall be approved from DTA/Authority.

Railing : Top Mounted Aluminum Continue Channel System With Aluminum Handrail and Glass : EXHIBIT - G.F. and F.F. Design, Supply, Installation of Railing as per apprved make and sample by DTA/ Authority. Providing and Fixing of 6063 Grade Top Mounted Aluminum Railing System with Akzonobel Powder coating color with Clear Toughened Glass, Glass has to be I Shape Packers, Aluminum Continue Channel Should be fix on the floor with the help of M10 X 100MM Hilti GI Anchor. Height of Aluminum bottom channel should be 125mm and width 70mm. Aluminum Top rail of Ø50mm to Install Handrail on Glass with Proper EPDM Rubber Gasket and Silicon. Railing Height will be 915mm From Finished Floor Level. And glass height will be up to 870mm. Work complete including all type of material, anchor fastening, fittings , fixtures, Finish, loading , unloading , safety measures , transportation, all leads ,accessories, sample mockup, all floor , all levels, all heights etc complete as per detailed drawings ,specifications and instruction of Authority/Authority. sample mock shall be approved from DTA/Authority.

"ACP Cladding Type 1: Equivalent to make VIVA Code: Metal Abstract Series - VA 8016 FR Class B1 (10 years of warranty), Panel Thickness- 4MM, Coil Thickness- 0.25MM, : Designing, framing testing, installing and fixing in position Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building, for all heights and all levels etc. including a) Structural analysis and design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 4mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face 1 and polymer (Service) coating on face 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, dowcorning weather silicone sealant (789), backer rods etc. c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing. The item includes cost of all material and labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests aluminium composite panel cladding, cleaning and protection of the aluminium composite panel cladding till the handing over of the building for occupation. The Contractor shall provide aluminium composite panel cladding, having all the performance characteristics all complete, as per the drawings, as per item description, as specified, as per the approved shop drawings and as directed by the DTA /Engineer. However, for the purpose of payment, only the actual area on the external face ( L x d) of the Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places. Base aluminium frame for ACP cladding is inclusive item as mentioned above. The rate shall be for complete item inclusive of all material, labour, wastages, necessary tools and tackles, scaffolding , adhesives consumable hardware and required accessories, grooves etc of approved make for all floors, all heights, all levels and all places within campus. Contractor shall do all the needful and shall fulfill DTA's design intent. No additional claims will be entertained for this. "

"ACP Cladding Type 2: Aluminium Composite Panels with Perforation/CNC cutting design: Equivalent to make VIVA Code: Lustre series - VA 6002 FR Class – B1 (10 years of warranty), Panel Thickness- 4MM, Coil Thickness- 0.25MM, : Designing, framing testing, installing and fixing in position Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building, for all heights and all levels etc. including a) Structural analysis and design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 4mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face 1 and polymer (Service) coating on face 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, dowcorning weather silicone sealant (789), backer rods etc. c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing. The item includes cost of all material and labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests aluminium composite panel cladding, cleaning and protection of the aluminium composite panel cladding till the handing over of the building for occupation. d) To create perforations in a ACP (Aluminium Composite Panel) sheet using CNC cutting, the following detailed specifications should be followed: First, ensure the CNC machine is equipped with a carbide-tipped blade designed specifically for cutting aluminium to achieve clean and precise cuts. Set the cutting depth to slightly less than the panel's thickness, around 3.8mm, to avoid damaging the core material. The perforation pattern should be designed using CAD software, ensuring that the holes are evenly spaced and aligned according to the desired design. The feed rate should be adjusted to a moderate speed to maintain accuracy and prevent overheating. Additionally, use a coolant or lubricant to reduce friction and prolong the blade's life. After cutting, inspect the perforations for any burrs or rough edges and deburr them if necessary to ensure a smooth finish. This process will result in a high-quality perforated ACP sheet that meets the design specifications. The Contractor shall provide aluminium composite panel cladding, having all the performance characteristics all complete, as per the drawings, as per item description, as specified, as per the approved shop drawings and as directed by the DTA/Engineer. However, for the purpose of payment, only the actual area on the external face (L x d) of the Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places. Base aluminium frame for ACP cladding is inclusive item as mentioned above. The rate shall be for complete item inclusive of all material, labour, wastages, necessary tools and tackles, scaffolding , adhesives consumable hardware and required accessories, grooves etc of approved make for all floors, all heights, all levels and all places within campus. Contractor shall do all the needful and shall fulfill DTA's design intent. No additional claims will be entertained for this. "

Item Description

Single Glaze Unit (SGU): Design, Fabrication, Supply, Installation and Handover of Single glass glazing system. Semi-unitized glass glazing Auminium (sash frame) fix Glass section Jindal make curtain section No. 22736 size 81.16mm x 50mm x 2mm weight 1.615 kg/mtr. Section No. 22738 size 81.16 x 38.5 x 2mm weight 1.294 kg/mtr. Shash frame section No. 35800 size 37.1mm x27.5mm x1.4mm weight 0.548 kg/mtr. Patti for shash frame 29.2mm x7.95mm x 2 mm , Akzonobel powder coated Aluminium section code SP338N with 50 micron. 6mm ET -125 Reflective Toughened Glass make Saint Gobin. 2mm thick x 12mm Brode 3M VHB Tape for stick glass, glass to metal structural sealent silicon and weather sealent silicon for groove, EPDM Gasket, m.s. bracket zinc coated, other necessary fixtures and fastening as per drawing specification (GLASS PANEL SIZE 1200 X 1820, 1200 X 1180) Work complete including all type of hardware, fittings , fixtures as per instruction of Authority/Archtect etc. Rate including all type of scaffolding, safety measures, form work at all floor, all levels etc. complete per detailed drawings and specifications, sample mock shall be approved from DTA / Authority.

Opening in Glazing : Extra for openable side / top hung vision glass panels including providing supplying at site all accessories and hardwares for the openable panels as specified and of the approved make such as heavy duty stainless steel friction hingis, min 4-point cremne locking sets with stainless steel plates, handles , buffers etc. including necessary stainless steel screws / fasteners, nuts, bolt, washers, fafety measures etc. all compete as per the DTAural drawings, as per the approved drawings, as specified and as directed by the engineer in-charge. sample mock shall be approved DTA/ Authority.

Travertino Texture : Providing and applying 1.5 mm thick traventino texture (matt/glossy finish) as per approved make and sample by Architect. work inclusive of base primer (50-60 MICRONS) (Jotashield Penetrating Primer) as per approved colour, HVLP spray Gun, 1 Coat Of Paint Matt Or Gloss Finish Top Coat Of 30 – 40 Microns By Brush Or Roller, inlcuding surface, Surface must be cleaned of chalk and debris. base coat of primer of relevant colour is applied on the plastered surface using a roller or brush, The material is applied using a spray gun to get the required design, water can be added in for easier application depending on the requirement, Drying time is usually between 8-24 hours depending on weather conditions. Rate shall inclusive of mock up sample, all materials, loading, unloading, transportation, placing at all floors and for all leads, all accessorie, Scaffolding etc as described in item description. Work complete as per the detailed drawing, mockup sample and instruction of Architect/Client.

U-Shaped Screen 50*50*50 mm (50mm Gap between two panels) Exterior Cladding System: Supply and Installation of METALIUMTM make U Shaped Baffle Panel Ceiling Size of 50 * 50 * 50mm (50mm Gap) Galvanized Steel 0.5mm TCT Plain Powder Coated Panel with Galvanized Steel Framing Accessories In Regular Black Colour Exterior Cladding System. U-Shaped Screen 50*50*50 mm Panel (50mm Gap) Exterior Cladding System: Panel (Galvanized Steel): Metalium make square edge P-50 series panels, 50 * 50 * 50 mm and 0.5 mm TCT Galvanized Steel. Panel length is up to approx. 3 mtr. Panels shall be powder coated on visible surface with special Exterior Grade powder to enhance property of Fadedness Resistivity. P-50 Carrier (U Shaped): Black enameled Galvanized Steel Carrier of 20mm wide at bottom x 39mm deep x 0.6 mm thick in a standard length of 8’ with cutouts to hold the panel in a module of 100 mm centre to centre at a distance of 1 mtr. Carrier and suitable structure shall be powder / coil coated on exterior face to enhance properties of Fadedness and corrosion resistivity. Installation Details: GS Clit shall be fixed on vertical columns with dash fasteners at distance not more than 1 mtr. Centre to centre on sections will be laid with corrosion proof screws and on this rigid structure carrier shall be fixed vertically / horizontally at distance of 1 mtr. Centre to centre. Panel shall be clipped to carriers. Contractor shall submit Shop drawing for all items for approval of Architect/ EIC.The rate shall be for complete item inclusive of all material, labour, wastages, necessary tools and tackles, scaffolding ,shop drawing , stability certificate ,etc for all floors, all heights, all levels and all places within campus. Contractor shall do all the needful and shall fulfill Architect's design intent. No additional claims will be entertained for this.

Fabrication: Designing , Supplying, fabricating, assembling, hoisting and fixing in position to alignments and levels as per approved shop drawings, structural steel work in-built up for building facade etc. to detail welded (welding as specified by the structural consultant) / bolted constructions comprising R.S. joists, channels, angles, plates or any MS rolled section including necessary permanent rivets, bolts and nuts, handling straightening, cutting, making holes, shop / site assembly, erection, (including preparation of template) transport to site, storing, etc., and painting with shop/site of zinc chromate primer coat prior to erection and two or more coats of first quality enamel paint of Asian make or approved make list and quality etc. Painting Procedure: Providing and applying enamel paint of Asian make or approved make list and desired shade, including the preparation surface (with emery paper 180 and wipe clean) by thoroughly cleaning all dust, dirt, applying epoxy coating and putty of again sand papering of (emery paper 180 and wipe clean) again applying primer again sand papering of (emery paper 320 and wipe clean) levelling rubbing the surface, to be free from undulation/ waviness, applying 1st coat of Epoxy paint and 2nd coat of Epoxy paint ) at all heights below and above highest plinth level, scaffolding / staging, as required complete as directed. (Payment will be made on the basis of standard section weights for net weight erected in position excluding rivets, temporary bolts, etc., but payment will be made for permanent bolts, nuts and washers.) Contractor shall submit Shop drawing for all items for approval of DTA/ Authority.The rate shall be for complete item inclusive of all material, labour, wastages, necessary tools and tackles, scaffolding ,shop drawing , stability certificate ,etc for all floors, all heights, all levels and all places within campus. Contractor shall do all the needful and shall fulfill DTA's design intent. No additional claims will be entertained for this.

Providing corrugated G.I. sheet of class-3 roofing fixed with glavanished iron J or L Hooks, Bolts and nuts 8mm diameter with bitumen and G.I. limpet washer or G.I. limpet washer. filled with white lead complete excluding the cost of purlins, Rafters and Trusses.(1) 0.80 mm thick sheet. Including cost of all type of tools, tackles, scaffolding, all labour, materials, transportation, Finishing, accessories, silicon sealent if required,. Work complete for at all floor, all level, all depth, all Height, all lead and lift etc. work complete as per the Detailed specification, shop drawing, approved sample, instruction of Architect/EIC. Sample mock shall be approved from Architect/EIC. Roof area shall be measured for payment.

Providing and fixing 150mm wide 450mm over all semicircular plain G.I.sheet class- 3 gutter with Iron brackets 40mm x 3mm size Bolts, Nuts, washers etc. including making necessary connection with rain water pipes. (i) 0.80 mm thick Sheet. Including cost of all type of tools, tackles, scaffolding, all labour, materials, transportation, Finishing, accessories, silicon sealent if required,. Work complete for at all floor, all level, all depth, all Height, all lead and lift etc. work complete as per the Detailed specification, shop drawing, approved sample, instruction of Architect/EIC. Sample mock shall be approved from Architect/EIC.

Removal of loose/damaged concrete and surface preparation: Removal of existing affected, distressed, loose cover concrete including loose damaged concrete from all structural members up to beyond the corroded steel reinforcements to a depth of 10 mm minimum behind the reinforcement only at affected concrete (Good and sound concrete should not be chipped / damaged) by chipping / hacking with chisel and hammer or by mechanical means like light weight chisel hammer,making saw cut at periphery to avoid feather edge Without causing detrimental effect to any part of the structure including all material, labour, tools, plant and machineries, lead and lifts etc. complete as directed by Engineer-in-charge and/or Consultant.

Rust Removal from Corroded Steel Bars: Cleaning of rust / scales / corrosion from reinforcement bars should be carried out using acid based rust remover, having a combination of acid based material, corrosion inhibitors and dispersing agents, Reebakleens RR of Fosroc having Specific Gravity 1.16 - 1.22 @ 25°C. The material to be applied to the rusted metal bar for a complete wetting of rusted metal surface, using brush and leaving it to dry for 30 Mins. and washing surface with fresh water as required to exposed reinforcement bar including labour, tools, plant and machineries complete as per detail specification and as directed by Engineer-in-charge.If there any other make that will going to used that it shall be prior approved from Design Consultant. The mode of measurement will be for the concrete area prepared.

Anti Corrosive coating on steel reinforcement: Providing and applying inhibition coats/system to exposed reinforcement bars and also new bars, after cleaning and removing scales and rust completely, Nitozinc Primer Std. of Fosroc, two component epoxy zincrich primer based on metallic zinc and epoxy resin which on mixing gives a grey coloured liquid Anti corrosive coat containing Active 'Zinc-rich' system which combats corrosion by electro chemical means. The zinc rich primer shall have specific gravity of 1.5, DFT-25 microns/coat, Fully dry/Recoatable- 45 minutes to 1 hour, it shall be applied at 25 microns dry film thickness.Typical application includes surface preparations by cleaning steel surface to a bright condition paying particular attention to the back of exposed steel bars, mixed two components slow speed heavy duty drill fitted with a paddle mixer, applying unbroken coat with suitable brush and allow to dry, after 30 mins apply second coat to ensure complete cover to exposed steel/ rebar etc complete as approved by engineer-in-charge shall be used as per manufacturer’s specification in two coats including all labours, tools and machineries, plants, necessary surface preparation and necessary protection after and during work. If there any other make that will going to used that it shall be prior approved from Design Consultant. The mode of measurement will be for the concrete area prepared.

Injection Nozzles for Epoxy Injection Grouting: Providing and installing NRV metallic nozzles at @250-500 mm distance (upto 4 Nos./Sqm of concrete) or specified distances as per design and detailed specifications in the parent concrete to facilitate dry pressure injection grouting of low viscous epoxy grout after making "v" grooves along the length of the cracks and removing debris, sealing the cracks with epoxy putty Nitocote VF followed by the pressure grouting, at all heights, including all material, labour, tools, temporary supports for structures, electricity, plant and machineries, curing etc. complete as directed by Engineer-in-charge and/or consultant. Mode of measurement: Payment to be made per Nos of nozzle installed

Epoxy Injection Grouting: Executing injection/pressure grouting in cracks in the parent concrete after fixing NRV metallic nozzles at specified distances. pressure grouting with low viscous solvent free two component moisture insensitive epoxy resin Conbextra EP10M having density of 1050 kg/m3. The epoxy injecting materials shall have compressive strength > 60 MPa as per ASTM D 695, Tensile Strength - 20 Mpa as per ASTM C307-94, Flexural Strength - 45 MPa as per BS 6319 Part-3 etc, complete. Pressure grouting shall be done at required pressure at all heights, including all material, labour, tools, temporary supports for structures, electricity, plant and machineries, curing etc. complete as directed by Engineer-in-charge and/or consultant. Mode of measurement: Payment to be made per kg of the material consumed.

Additional Reinforcement Supplying, cutting, fabricating new reinforcement Fe500 for Jacketing, any new RCC work and providing additional steel reinforcement to compensate corroded reinforcement in existing member etc. and fixing with old existing reinforcement which was reduced to 15 percentage or more of its original diameter as required as provided in original structure and additional steels as directed by EIC and/ or consultant as required tying with 16 gauge annealed binding wire complete as per drawing and specifications for all heights including all material, labour, tools, plant and machineries, curing etc. complete as directed by Engineer-in-charge and/or consultant (TMT BARS of various size as required)

Shear connectors:- Drilling holes into existing concrete substrate for anchoring of new anchoring rebars with 8 mm dia shear connectors at 0.35-0.4 m c/c (6 to 8 Nos/Sqm) as per drawing and for additional rebar provision in repair area and fixing with Styrene Free Vinyl Ester-Resin based chemical anchor grout Lokfix E45T of Fosroc. Drilling hole diameter: 4 mm larger to rebar dia drilling depth: min 10 times the rebar dia including cleaning, cutting, fabricating, chemical, tools, tackles etc. completed as directed by EIC.The chemical should have ETA approval for Diamond Drilling, LEED Compliant VOC Level, Seismic C1 and C2 testing as part of EAD 330499-01-0601.Lokfix E45T posess following properties Compressive Strength -100 MPa, Flexural Strength - 15 Mpa, Shore D Hardness-90, Thermal Conductivity - 0.65W/m.K. including all labours, tools and machineries, plants, necessary surface preparation and necessary protection after and during work. Measurement shall be made per number of shear connectors installed. Steel shall be payed separately.

Epoxy Bonding Agent: Providing and applying bonding agent Nitobond EP Std of Fosroc which shall be a solvent free epoxy based two component resin system . The bonding agent shall be applied by brush and should remain in tacky state after application for a minimum period of 3 hrs at 35 deg C. The product shall achieve 40 N/mm2 compressive strength (BS 6319-2), 15 N/mm2 tensile strength (BS 6319-7), 25 N/mm2 flexural strength (BS 6319-3) and 11 N/mm2 bond strength (ASTM C881) ,etc complete (The new repair mortar/concrete should be applied within overlay time of epoxy bonding agent mentioned as per manufacturer's data sheets) at all heights, including all material, labour, tools, plant and machineries, curing etc.

Polymer Modified Mortar: Providing and Applying single component, dual shrinkage-compensated, high strength, fibre reinforced, thixotropic cementitious patch repair mortar on the prepared surface at speicifed thickness, and shall be mixed with water at water powder ratio of 0.18, that achieves compressive strength minimum of 15 MPa at 1 day and 45 MPa at 28 days and capable of applying upto 50mm thick in single layer such as Renderoc SP40 of Fosroc make to the prepared concrete area for upto 50mm, as per manufacturer’s specification, initially by hand and finally finishing the same with trowel carefully compacting the same around the rebar and finishing to bring it in line with existing concrete surface on the patches on the piles etc. as per specification . Item rate is inclusive of materials, all labour, tools and tackles and transportation etc. complete as per specification and as directed by Engg.-in-charge. The cured product shall have following properties: 1) Drying shrinkage 20Mpa at 1 Day 45 MPa at 28 Days as per BS1881 3) Flexural Strength > 7 Mpa at 28 days as per ASTMC 348 4)Tensile strength> 2.5 MPa at 28 days as per BS6319 5)Fire Rating - Class A1 (EN1504-3) 6)Product used shall have CE (CE-29842) marking and compliance according to Construction Products Directive 89/106/EEC (CPD)

Anticarbonation cum Protective Coating for external surfaces: Providing and applying Dekguard E2000-Elastomeric, water based protective anti-carbonation coating supplied in 20 Kg drum based on a special acrylic polymer to exposed concrete or masonary surface after proper surface preparation, cleaning of dust, dirt etc., treatment of surface irregularities using Renderoc FC (wherever required), followed by application of Dekguard WB Primer - Penetrating primer coverage @ 8-10 m2/ltr on prepared surface, allow the same to dry for 2 hrs at 25°C followed by application of 2 coats of Dekguard E2000 at 200 microns DFT coverage @ 2.5 m2/ltr, using suitable brush or roller. The cured coating shall exhibit the following properties: Tensile strength (ASTM D412) > 3.0 N/mm2, Elongation(ASTM D412) > 200 percentage, Adhesion (ASTM D4541) > 1.0 N/mm2, Tear resistance – 12 N/mm2, Carbon dioxide diffusion Resistance equivalent thickness of air (DIN EN 1062 part 6 and FTM276) > 50 m, Carbon dioxide diffusion resistance equivalent thickness of air (Taywood method) : 240 m, Carbon dioxide diffusion resistance equivalent thickness of 30N concrete (Taywood emthod) : >500mm, Water vapour diffusion resistance (Kolpfer method - effective resistance Sd 500 hrs, Reduction in water absorption(ASTM C642) - > 82 percentage,Solar reflecctive index : 105 (ASTM 1980-11),Direct solar reflectance : >83percentage (ASTM 1980-11), Emmissivity: >93percentage (ASTM 1980-11).Item rate is inclusive of materials all labour, tools and tackles, complete as per specification and as directed by EIC.

Poiniting Work in Existing Brick Masonry Wall: Raking out the worn out joints, prewetting the joints and Providing and applying Renderoc SP40 shrinkage controlled, polymer modified, fiber reinforced cementitious mortar at 10mm joint width and 50mm deep. The mortar shall have drying shrinkage 45 MPa, Flexural Strength > 7 MPa at 28 days. The mortar shall be cured with water of Concure WB curing compound, etc, complete.Product used for pointing shall have CE (CE-29842) marking and compliance according to Construction Products Directive 89/106/EEC (CPD)

Stitching of cracks in Masonry: (wherever required) Cutting a 15 mm deep slit across the crack or cracked element roughly 4 mm wide perpendicular to crack; providing and Inserting noncorrosive Carbon Fiber Reinforced Polymer (CFRP) plate – Nitoplate Crackfix which is about 10 mm wide 1.5 mm thick and 300 mm long in the slit as above and filling slit with Renderoc SP40 thereby binding both the weathered or deteriorated portions together allow it to cure ,etc complete.

Waterproofing Works on Masonry Wall: Providing and applying two coats of Brushbond Aquaprotect - polymer modified cementations waterproof coating tested as per USFDA CFR 175-300 and DIN1048 After carry out proper surface preparation including removing loose concrete, foreign material,cleaning of concrete surface, etc, pre dampening of the concrete surface mixing all components using heavy duty slow speed drill fitted with a mixing paddle followed by application of two coats coverage @1.9 kg/sq.m per coat using a suitable brush as per manufacturer’s instructions. Cured Brushbond Aquaprotect shall having the capability to resist a positive and a negative water pressure when tested to density: 1950 kg/m3,Water Permeability Test EN12390 (part8)Negative pressure: NIL Chloride ion Penetration as per ASTM C1202-03 : Low.

LIFT: 10 Passenger - Gearless_MRL_10P_2N : Make - Trio, Otis, Schindler, Mitsubishi, Johnson, Omega, Kone : Remove of existing lift including all materials, machineries , equipment etc . Design , Supply, Installation, Testing and Commissioning of Passenger lift as per approved make and sample by DTA/ Authority. work complete including all type of scaffolding, loading, unloading , transporation, fittings, fixtures , all type of safety measures, equipment , at all floor, all levels etc. complete as per shop drawings and specifications. sample mock and Shop drawing shall be approved from DTA/ Authority.No extra charges will be paid for any scaffolding required for installation of lifts works. The intending bidder should visit the site prior to the bidding submission. Rate shall be quoted only after by initial site inspection further no discrepancy will be allowed for whatsoever reason. As per attached technical specification data sheet in tender documents. Remove of existing lift including all materials, machineries , equipment etc . No extra charges will be paid for remove of existing lift , any civil works, scaffolding required for installation of lifts works. The bidder shall carry out all civil work related to installation of lift as per the drawings and as per actual site conditions. Note : Liasioning for all statutory approvals pertaining to Lift Installation with certification from Govt. Authority for Licensee for operation of Lift at Site with all clearance shall be in scope of Contractor. • Model Type TR-SMS1 , • Door Operation Automatic , • Classification Passenger • Machine Gearless , • Number of Passengers 10 , • Rated Load (Kg) 680 • Control Microprocessor Based Controller With VVVF ,• Operations Full Collective Simplex • Speed (m/s) 1.00 , • Number of Stops 2 , • Floors Served Front 2 ,• No Of Opening 2 • Floor marking 0, 1 ,• Floor to floor height (mm) 5000 ,• Power Supply 400 Volts 3 Phase 50 Hertz A. C. Light Supply:230 Volts, 50 Hertz Single Phase ,• Machine Room Machine Room Less ,• Car Entrance Type Same Side , B. Civil Dimensions ,• Door Width (mm) 800 • Door Height (mm) 2000 ,• Shaft Width (mm) 1800 ,• Shaft Depth (mm) 2000 • Car Height (mm) 2200 , • Travel Height (mtr) 5.00 , • Pit Depth (mtr) 1.60 • Headroom (mtr) 5.00 ,• Shaft Details RCC Wall , C. Car and Landing Details • Car Door Type Automatic Telescopic Opening LH ,• Car Door Finish Hairline Stainless Steel • Landing Door Type Automatic Telescopic Opening LH ,• Landing Door Finish With Locations SSHL TELE. OPENING DOORS AT ALL LANDINGS • Door Frame Location SSHL AT ALL LANDINGS • Car Panels - Shade / Finish Hairline Stainless Steel , • False Ceiling SMFC1 • False Ceiling - Shade / Finish LED lights , • Car Ventilation Blower • Flooring PVC Antiskid • Handrail SMHR1 (Curved Handrail Stainless Steel Hairline finish ) • Handrail Location REAR SIDE OF CAR • No. Of Handrails 1 D. COP Details • Push Button Type SMCP5 • COP Height Standard • Display In COP Dot Matrix E. LOP and Hall Indicator Details • Push Button Type SMHP2 • Display Type 7 Segment • Display Position In LOP • LOP Location On Wall F. Standard Control Functions / Features • Digital Floor Position Indicator in Car and at all floors • Multibeam door censor • Door Open/Close Buttons In Cop • Alarm Button In COP (With Battery Back-Up) • Emergency Light In Car • Intercom Between Car and Ground Floor • Auto Rescue Device In Case Of Power Failure • Overload Function With Audio/Visual • Fireman Control • Auto/Attendant operation • Auto/Manual Fan On/Off G. Optional Control Functions / Features • Voice Announcement system Type Standard • Power Saving function for LED Lights and Displays I. Free Warranty : FREE WARRANTY 12 months

Comprehensive Maintenance : 10 Passenger LIFT : everything is cover parts , accessories , machineries etc : Second Year

Comprehensive Maintenance : 10 Passenger LIFT : everything is cover parts , accessories , machineries etc : Third Year

Gypsum ceiling (FR andMR grade) : Seamless Ceiling of 12.5mm FRMR with Gypserra Framing Providing and Fixing M/F Suspended Fire Resistance Moisture Resistance Gypsum Ceiling which includes 20x28x30x0.5mm Gypserra™ Perimeter Channel {Material-GI(IS513), YS-300Mpa, Finish-Galvanised 150GSM(IS 277)} is fixed along the perimeter of existing wall/ partition with the help of suitable HPS - 1 (6x40) impact anchor / PVC Anchor (6x40) at 600mm c/c for the brick wall, at 600mm centres. 25x25x0.7mm Gypserra™ Ceiling Angle {Material-GI(IS513), YS-300Mpa, Finish-Galvanised 150GSM(IS 277)} is suspended at up to 1.5m height by fixing it to the 27x37x25x1.6mm Gyproc® soffit clit {Material-GI(IS513), YS-300Mpa, Finish-Galvanised 150GSM(IS 277)} with Soffit Cleat and or Gyproc® Rawl Plug- Ø8x45mm {Material-IS 513 CR2 grade, Zinc coating (7 to 8 microns)Pull Out Load- 7.5kN for M30 concrete grade} creating 1220mm x 1220mm grid. 15x45x15x0.9mm Gypserra™ Intermediate channel {Material-GI(IS513), YS-300Mpa, Finish-Galvanised 150GSM(IS 277)} is fixed to the 25x25x0.7mm Gypserra™ Ceiling Angle with M6 x 12mm Hex Bolt and Hex Nut arrangement {Material–As per EN 10083 Finish – Zinc Plating} or with 2 Nos of Ø4.2x13 Gyproc® metal to metal screw {Material-Carbon steel EN-ISO 7049/50 Finish- Zinc Coating Thickness- 4.14micron.} The 80x26x0.5mm Gypserra™ Ceiling Section {Material-GI(IS513),YS-300Mpa,Finish-Galvanised 150GSM(IS 277)} is then fixed to the 15x45x15x0.9mm Gypserra™ Intermediate Channel {Material-GI(IS513),YS-300Mpa,Finish-Galvanised 150GSM(IS 277)} with the help of Ø 2.64mm Gyproc® Connecting Clip {Material-High carbon spring steel wire (BS970Gr.En42)-46-48HRC,Finish-Zinc plating 4-6 micron} and in direction perpendicular to the Intermediate channel at 457mm c/c. 12.5mm thick Gyproc® FRMR Board consists of an aerated gypsum core with glass fibre, water repellent and other additives encased in, and firmly bonded to, strong paper liners. (conforming to IS 2095-Part 1:2011/EN 520:2004, TYPE-F and H1/ ASTM C1396, TYPE X) of size 1219 x 1829mm is then screw fixed to ceiling section with 25mm drywall screws {Material-Carbon steel EN-ISO 7049/50, Finish-Case hardened Grey Phosphating as per JIS G3507-1} standard at 230mm centres. Gypsum Board to be certified class 1 under BS-476 Part 5,6, and 7 and certified GreenPro by CII. Finally, square and tapered edges of the boards are to be jointed and finished to have a flush look which includes filling and finishing with Jointing Compound and Joint Paper tape. Serrated steel section has an effective thickness of 2T (2xdepth), better load carrying capacity, enhanced screw retention, Improved acoustic performance and fire resistance as compared to plain steel section. All GypSerra™ metal components are Design Patented in India (325062). Vendor to submit MTC, material inspection report and/or performance certificate for the system.Rate shall inclusive cost of making of all cutouts for light fixtures, gadgets, gizmo, pelmets, grooves, beads and also provide support/ template where ever required.The rate shall be in sq.mt for all floors and at all heights including all costs

Calcium silicate grid ceiling : Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’, bottom exposed with 24 mm of all Tsections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer-in-Charge. Note :- Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/opening (cut outs) having area less than 0.30 sqm.The calcium silicate ceiling tile shall have NRC value of 0.50 (Minimum), light reflection > 85percentage, non- combustible as per B.S. 476 part IV, 100percentage humidity resistance and also having thermal conductivity <0.043 w/mK. Rate shall inclusive cost of making of all cutouts for light fixtures, gadgets, gizmo, pelmets, grooves, beads and also provide support/ template where ever required.The rate shall be in sq.mt for all floors and at all heights including all costs .

Metallic baffles Ceiling 3 : Aluminium 0.70mm TCT Wooden Powder Coated Panel Supply and Installation of METALIUMTM make U Shaped Baffle Panel Ceiling Size of 100 * 50 * 100mm (100mm Clear Open Gap) Aluminium 0.71mm TCT Wooden Powder Coated Panel with Galvanized Steel Framing Accessories In Regular Black Colour Metal False Ceiling System. Rate shall inclusive cost of making of all cutouts for light fixtures, gadgets, gizmo, pelmets, grooves, beads and also provide support/ template where ever required.The rate shall be in sq.mt for all floors and at all heights including all costs . Rate shall inclusive of mock up sample, all materials, loading, unloading, transportation, placing at all floors and for all leads, all accessories ,fittings , fixtures , Scaffolding etc as described in item description. Work complete as per the detailed drawing , mockup sample and instruction of Architect/Client.

Grid Ceiling of Ecophon Sombra™ A : Acoustical Black Coloured Grid Ceiling Providing and fixing tiled false ceiling of size (600x600)mm or 1200x600)mm in true horizontal level suspended on interlocking Gyproc® Bolt-slot grids. It consists of main T runner of size (35x15x0.3x3000)mm, Gyproc cross T runner of size (35x15x0.3x1200)mm, Gyproc® secondary cross T runner of size (35x15x0.3x600)mm, (0.5x600/1200x150/300)mm of plain metal planks. Gyproc®Ceiling fastener with bracket is fixed to soffit , creating (1200 x 600/1200)mm grid. Gyproc® Main T runners are then suspended at 1200/600mm c/c from ceiling using 4mm zinc electroplated butterfly level clips of size (85x30x0.8)mm spaced at maximum 1200mm center to center along main T runner and not more than 150mm from spliced joints. The last hanger at the end of each main runner should not be greater than 600mm from the adjacent wall. 1200 mm cross T is interlocked between the main T at 600mm center to center to form a grid of 1200x600mm and then Gyproc® 600 mm secondary cross T is then interlocked at middle of the (1200x600)mm grid to form grids of (600x600)mm. Cross T at the ends having length more than 600mm are to be supported independently. Finally, Ecophon Sombra™ A tiles of size (595x1195/595)mm and overall thickness 15mm, NRC≥0.95 and Metal Plank of size (1200x150)mm are placed in the grid. Technical row is created by running two parallel Main Ts with the desired distance of 150/300 mm between the Main Ts. For continous light Saint-Gobain Gyproc Adjustable Grid spacer to be used instead of 150 mm cross T. Saint-Gobain Ecophon Sombra™ A has an exposed grid system. For applications requiring a black ceiling with low light reflection and good sound absorbing properties. Size 600x600x15mm • Manufacturing- Manufactured in Sweden, production unit is ISO 14001 certified. • Acoustics-Sound absorption (Alpha W) - 0.95 at 200 mm o.d.s as per EN ISO 354 • Acoustics-Sound absorption Class - Class A at 200 mm o.d.s as per EN ISO 11654 • NRC - 0.9 NRC as per ASTM C 423 • Flexural tensile strength - Class C/3N • Indoor Air quality - Complying with the French regulation on VOC emissions, A level. Certified by the Finnish Building Information Group (RTS) with the M1 label.Certified by Eurofins Indoor Air comfort® . Product Certified under GRIHA council of India for Green Ratings, Comply with the REACH regulation of the European chemical Agency, certified by the EUCEB which confirms that mineral wool is produced in conformity with the Note Q of EC No 1272/2008 and therefore classification as a carcinogen does not apply • Environmental Footprint - Environmental Product declaration (EPD) acc to international ISO 14025 and EN 15804 series of standards. • Circularity - Minimum post-consumer recycled content 55percentage, Fully recyclable • Fire Safety - Tested and classified as non combustible according to EN ISO 1182 with reaction to fire classification class A2 s1 d0 according to EN 13501-1 - European Standard. • Humidity Resistance -Class C, relative humidity 95percentage and 30°C, according to EN 13964:2014 • Light Reflectance - 3-4percentage light reflectance. • Cleanability- Weekly dusting and vacuum cleaning. • Accessibilty - The tiles are easily demountable • CE Marking - Ecophon ceiling systems are CE marked according to the European harmonized standard EN13964:2014. CE marked construction products are covered by a Declaration of Performance (DOP) which enables customers and users to easily compare performance of products available on the European market.Rate shall inclusive cost of making of all cutouts for light fixtures, gadgets, gizmo, pelmets, grooves, beads and also provide support/ template where ever required.The rate shall be in sq.mt for all floors and at all heights including all costs .

Seamless Perforated Ceiling : Seamless Ceiling of 12.5mm Rigitone activ'Air 8-15-20 with Gypserra Framing Providing and FixingM/F Suspended Rigitone Activ’Air 8-15-20 super Ceiling includes 20x28x30x0.5mm Gypserra™ Perimeter Channel {Material- GI(IS513),YS-260Mpa,Finish- Galvanised 150GSM (IS277)} is fixed along the perimeter of existing wall with the help of HILTI HPS - 1 (6x40) impact anchor at 600mm centres. 25x25x0.5mm Gypserra™ Ceiling Angle {Material- GI(IS513),YS-260Mpa, Finish-Galvanised 150GSM(IS277)} is suspended by fixing it to the 27x37x25x1.6mm Gyproc® soffit cleat {GI(IS513)YS-260Mpa, Finish-Galvanised 120GSM (IS277)}. Soffit Cleat and Gyproc® Rawl Plug- Ø8x45mm {Material-IS 513 CR1 grade, Zinc coating (7 to 8 microns) pull out load- 6.8kN for M30 concrete grade} creating 1000mm x 900mm grid. 15x45x15x0.9mm Gypserra™ Intermediate channel {Material-GI(IS513),YS-260Mpa,Finish-Galvanised 150GSM(IS277) fixed to the ceiling angle at every 1000mm c/c} and Gypserra™Ceiling Angle is fixed at every 900mm along the length of Intermediate channel with M6 x 12mm Hex Bolt and Nut arrangement {Material–As per EN 10083 Finish – Zinc Plating} or with 2 Nos of Ø4.2x13 Gyproc® metal to metal screw {Material-Carbon steel EN-ISO 7049/50 Finish- Zinc Coating Thickness- 4.14micron.}. 80x26x0.5mm Gypserra™Ceiling Section {Material-GI (IS513),YS-260Mpa,Finish-Galvanised 150GSM(IS277)} is then fixed to the Gypserra™ Intermediate Channel {Material-GI(IS513),YS-260Mpa, Finish-Galvanised 150GSM (IS277)} with the help of Gyproc® Connecting Clip {Material -High carbon spring steel wire(BS970Gr.En42),46-48HRC,Finish-Zinc plating 4-6 micron} and in direction perpendicular to the Intermediate channel at 327mm c/c. Boarding shall start from the center of ceiling area. Single layer 12.5mm Gyproc Rigitone Activ’Air 8-15-20 Super board of size 1200x1960mm having all four square edges, 10percentage perforation area of board and hole size of 8,15 and 20mm diameter , scattered spacing, backed with acoustic tissue, having NRC values 0.55, is then screw fixed to ceiling section with 30mm Rigitone screws/25mm drywall screws {Material-Carbon steel EN-ISO 7049/50,Finish-Case hardened Grey Phosphating} at 170mm centres. For higher NRC value, Rockwool of 48kg/M3 and 50mm thick can be placed on top of the board (Refer Rigitone Activ’Air 8-15-20 Super - PDS for the NRC values). Finally all square edges of the boards are to be jointed and finished so as to have a flush look. The joint filling using Vario joint filler and Rigitone joint filler set technique should be employed for the joint-less installation of Rigitone perforated boards with continuous Perforation. After installation and joint-filling, the boards should be primed and then painted with a short haired paint roller. Paint should not be applied using a brush or spray diffuser . Serrated steel section has effective thickness of 2T (2xdepth), better load carrying capacity, enhanced screw retention, Improved acoustic performance and fire resistance as compared to plain steel section. Rate shall inclusive cost of making of all cutouts for light fixtures, gadgets, gizmo, pelmets, grooves, beads and also provide support/ template where ever required.The rate shall be in sq.mt for all floors and at all heights including all costs.

Stretch Fabric (Eco Friendly Rohs;) Rainbow Premium Eu Uv Translucent 1111 Stretch Ceilling Membrane Includes Supply Of Premium Stretch Ceilling Model Eu -1111 Fabric Made As Dimesion With The Exact Dimension With Rib Premium Aluminum Gripper. The Ceilling Must Be Stretched And Hooked Into Premium Aluminium Grippers Insuring Good Rigidity. A Pvc Hook For Tension Mounting Is Welded On The Outline Of The Ceilling Membrane With All New And Updated Technology. Max Width Upto 15 Ft Thk:- 0.18 Mm; Weight 220 Gm/M2 Transmission: 75 percentage Rate shall inclusive cost of fixtures, gadgets, gizmo, pelmets, grooves, beads and also provide support/ template where ever required.The rate shall be in sq.mt for all floors and at all heights including all costs .

Acoustic Hanging baffle ceiling : 1800X400 x 25 mm Supply and Installation of Supreme Acoustics HushHANG FR Muffle Designer Wrapped Baffles hardened square edge with Capcel wrapped with stretch Muffle (colours Choice, FR option also aviable), square edge, FR grade, ResiMER. The material should be 100percentage Recyclable and it should comply ROHS and REACH Certification, Green Building product, with Honeycomb structure, in form of sheets and can be supplied in any customised size. Supreme Acoustics Muffle finish and are front fully encapsulated. Core material of the panels are having volume density 30 kg/m3. Framing and Finish : Each is provided with 2 sets of accessories containing Supreme Spiral Screw / Supreme Spiral Springs, levelling hook and hanger wires. Supreme Spiral Screw / Supreme Spiral Springs to be rotated and anchored at top of each panel at two points to hold the panel stable. Supplied hanger wires to be first dropped from the beam/slab/truss to desired height with suitable Anchor bolts and S hook. Supreme Acoustics PendaSWING Muffle Designer are then suspended using Supreme spring hooks and Supreme hanger wires and levelled into position with supplied levelling clips. Technical Parameters for ResiMER • Fire (Class) – UL94 HF-1 - Premium quality Fire Retardant (Self - Extinguishing flame safety standards). • Acoustics – NRC - Upto 0.90 and Mid / High Frequencies is Up To 1.0* • Thermal (W/mk)– 0.03206 w/m-k • Climate (°C, RH) – No Change • Light (percentage) – Colour Dependant • Green (VoC, RC percentage) – CFC Free and very has very Low VOC, • Resistant to insect and rodent attack • Resistant to bacterial, fungi or any bio attack • Moisture-resistant – No mositure content, can be stable. • REACH Compliance. (Registration, Evaluation, Authorization and Restriction Of Chemicals) • ROHS Certified. (Restriction Of Hazardous Substance) Technical Parameters for Fabric Fire (Class) – BS EN :1021 Part 1 and 2 • Acoustics – NRC - Upto 0.10 • Thermal (W/mk)– 0.03 • Climate (°C, RH) – No Change • Light (percentage) – Colour Dependant • Green (VoC, RC percentage) – Low Rate shall inclusive cost of making of all cutouts for light fixtures, gadgets, gizmo, pelmets, grooves, beads and also provide support/ template where ever required.The rate shall be in Numbers for all floors and at all heights including all cost.

Providing and fixing Trap door in ceiling (hinged)(double shutter) of sizes given As per drawings with Red Meranti frame and suspenders (section 50mm x 50mm). Single shutter or double shutter made out of 18mm marine plywood and teak wood leaping hinged to the frame as shown in drawing including P/f allen key lock, hinges, safety chainand other necessary hardware, finished with 1.0mm thick approved laminate on in side and out side MDF finish With approved paint (type of paint will be as per different location) ( primer + 3 coats ) of approved make and shade on other side etc. complete as instructed by the Engineer incharge or PMC. (Mode of measurements : Area of trap door opening shall be measured for payment)

Proving and fixing MS frame structure with Anticorrosive paint as per design in architectural drawings above ceiling to support ply partition. Frame structure should be anchored and supported from RCC slab and rate should be inclusive of all consumable fabrication cost and anchor fastner etc. all complete. for any additional support required for ceiling, partition etc work.

Partition : TYPE -1 : 145mm_for 5.8m Height Providing and Fixing 145.0mm thick Gypwall Habito Standard partition consist of GypSerra® (“Patented in India (325062)”) Metal framework partition having maximum reachable height of 5700mm satisfying L/240 criterion at 200Pa. Partition comprises of double layer, tapered edge Gypsum Board, certified GreenPro by CII and strategic location of manufacturing plants results in lower carbon emissions. Partition comprises of double layer, tapered edge Gypsum Board, certified GreenPro by CII and strategic location of manufacturing plants results in lower carbon emissions. Partition includes inner layer of 12.5mm thick Gypboard®Plain ISI marked, conforming to IS 2095 Part 1:2011, having flexural strength – {Longitudinal > 500N and transverse > 180N} and outer layer of 13mm thick Gyproc® Habito® Standard with calcium sulphate dihydrate encased in high gsm paper liners with glass fibers and other additives for enhanced performance , class 1 rated (BS 476 -7) consists of tapered edge and dense core (with enhanced point load bearing capacity of upto 15kg on regular No.10 wood screw (of pull out strength of >is equals to300N ) ; having thermal conductivity 0.24w/m°k, tested as per IS 2095 Part 1 (Type D,F,R2), EN 520 (D,F,I,R) having flexural strength – {Longitudinal > 754N and transverse > 312N} on either side of the framing. GypSerra® Metal frame work, designed in compliance with BS EN 14195 and manufactured using CR1 Grade Steel as per IS 513, having yield stress of 300MPa and tensile strength of 340MPa with surface finish of AZ150 as per IS 15961/AS 1397 and tested for 500hrs of salt spray test as per ASTM B117, includes 92x34x36x0.5mm GypSerra® C-Stud with lip of 6.5mm and H-cutout on web enabling the services to pass, having moment of inertia 115488mm4 about major axis, positioned at 610mm c/c in 94x32x32x0.5mm GypSerra® Floor Channel and 94x32x32x0.5mm GypSerra® Ceiling Channel with flanges bend at 5° acute angle. Floor and Ceiling Channel is anchored with Gyproc® Rawl plug Ø8x45mm having Pull Out strength of 6.8KN or Nail**, fixed at 600mm c/c in zig zag manner. 92x40x40x0.5mm GypSerra® Noggin Channel to be placed between the studs, behind the horizontal board joint. Inner and Outer layer of Gyproc® Boards to be Screw fixed with Gyproc®Drywall Screw and Gyproc® Drywall Screw of 25mm with 12nos per m2 and 35mm with 24nos per m2 at spacing of 600mm and 300mm respectively. Saint Gobain Make Twigainsul 50mm Glasswool of density 20kg/m3 shall be placed in Metal framework with the help of holding Clip. Edges and joints to be finished with Gyproc® Pro-Fill JC conforming to ASTM C475 and Gyproc®Paper tape. Periphery and cut-outs of the partition to be treated with suitable Fire and Acoustic Sealant.All the performance test are carried out at NABL accredited/ government approved lab.All other detailing and specifications to be followed as per approved drawing of Gyproc.Vendor to submit MTC. Rate shall include cost of making of all cut-outs for light fixtures, switchboards gadgets, gizmo, pelmets, grooves, beads and also provide support/template where ever required and For door frame fixing, storages, shelves, paneling etc extra Wooden members to be used shall be of CP teak wood only. Including skirting /MDF board/wooden skirting cut out as per EIC instruction at siteThe rate shall be in sq.mt for all floors and at all heights including all costs. including ply base for fixing of TV or Overhead storage wherever required, The rates are also inclusive of necessary scaffolding, tools, tackles,, safety measures , Internal partial support .The shop drawing (or a sample mock of 5 Sqm minimum of the frame work and partition) shall be approved from EIC and Architect. All exposed corner shall be covered with perforated angle as per manufacturer's specifications or as directed by EIC. Partition ht will be measured from finish floor to false ceiling level only. Work inclusive of above ceiling solid partition framework as per drawing. Contractor shall take care noise for transformation one Area to another area.

Partition : TYPE -2 : 145mm_Free-standing wall : 3m Height Providing and Fixing 145.0mm thick Gypwall Habito Standard partition consist of GypSerra® (“Patented in India (325062)”) Metal framework partition having maximum reachable height of 5700mm satisfying L/240 criterion at 200Pa, Partition comprises of double layer, tapered edge Gypsum Board, certified GreenPro by CII and strategic location of manufacturing plants results in lower carbon emissions. Partition comprises of double layer, tapered edge Gypsum Board, certified GreenPro by CII and strategic location of manufacturing plants results in lower carbon emissions. Partition includes inner layer of 12.5mm thick Gypboard®Plain ISI marked,conforming to IS 2095 Part 1:2011, having flexural strength – {Longitudinal > 500N and transverse > 180N} and outer layer of 13mm thick Gyproc® Habito® Standard with calcium sulphate dihydrate encased in high gsm paper liners with glass fibers and other additives for enhanced performance , class 1 rated (BS 476 -7) consists of tapered edge and dense core (with enhanced point load bearing capacity of upto 15kg on regular No.10 wood screw (of pull out strength of >is equals to300N ) ; having thermal conductivity 0.24w/m°k, tested as per IS 2095 Part 1 (Type D,F,R2), EN 520 (D,F,I,R) having flexural strength – {Longitudinal > 754N and transverse > 312N} on either side of the framing. GypSerra® Metal frame work, designed in compliance with BS EN 14195 and manufactured using CR1 Grade Steel as per IS 513, having yield stress of 300MPa and tensile strength of 340MPa with surface finish of AZ150 as per IS 15961/AS 1397 and tested for 500hrs of salt spray test as per ASTM B117, includes 92x34x36x0.7mm GypSerra® C-Stud with lip of 6.5mm and H-cutout on web enabling the services to pass, having moment of inertia 115488mm4 about major axis, positioned at 407mm c/c in 94x32x32x0.5mm GypSerra® Floor Channel and 94x32x32x0.5mm GypSerra® Ceiling Channel with flanges bend at 5° acute angle. Floor and Ceiling Channel is anchored with Gyproc® Rawl plug Ø8x45mm having Pull Out strength of 6.8KN or Nail**, fixed at 600mm c/c in zig zag manner. 92x40x40x0.5mm GypSerra® Noggin Channel to be placed between the studs, behind the horizontal board joint. Inner and Outer layer of Gyproc® Boards to be Screw fixed with Gyproc®Drywall Screw of 25mm with 12nos per m2 and 35mm with 24nos per m2 at spacing of 600mm and 300mm respectively. Saint Gobain Make Twigainsul 50mm Glasswool of density 20kg/m3 shall be placed in Metal framework with the help of holding Clip. Edges and joints to be finished with Gyproc® Pro-Fill JC conforming to ASTM C475 and Gyproc®Paper tape. Periphery and cut-outs of the partition to be treated with suitable Fire and Acoustic Sealant.All the performance test are carried out at NABL accredited/ government approved lab.All other detailing and specifications to be followed as per approved drawing of Gyproc.Vendor to submit MTC. Rate shall include cost of making of all cut-outs for light fixtures, switchboards gadgets, gizmo, pelmets, grooves, beads and also provide support/template where ever required and For door frame fixing, storages, shelves, paneling etc extra Wooden members to be used shall be of CP teak wood only. Including skirting /MDF board/wooden skirting cut out as per EIC instruction at siteThe rate shall be in sq.mt for all floors and at all heights including all costs. including ply base for fixing of TV or Overhead storage wherever required, The rates are also inclusive of necessary scaffolding, tools, tackles,, safety measures , Internal partial support .The shop drawing (or a sample mock of 5 Sqm minimum of the frame work and partition) shall be approved from EIC and Architect. All exposed corner shall be covered with perforated angle as per manufacturer's specifications or as directed by EIC. Partition ht will be measured from finish floor to false ceiling level only. Work inclusive of above ceiling solid partition framework as per drawing. Contractor shall take care noise for transformation one Area to another area.

Partition : TYPE -3 : 145.20 mm thickness : Curvature wall: 5.8 m Height Providing and Fixing 144.0mm thick Curvature wall partition consist of GypSerra® (“Patented in India (325062)”) Metal framework partition having maximum reachable height of 6000mm satisfying L/240 criterion at 200Pa, possessing fire rating of 60mins, tested in accordance to BS-476 Part 20 and 22 and sound insulation (Rw) of 45*dB, tested in accordance to ISO 10140-2/ASTM E90 and spectrum adaption term as per ISO 717-1, having U-value of 0.29W/m²K and Severe duty rating as per BS 5234 part 2. Partition comprises 12.5mm thick mold resistant Gyproc®GlasrocH with Glass mat reinforcement and inorganic coating on surface, conforming to EN 15283-1 Type GM - FH1, having flexural strength – {Longitudinal > 540N and transverse > 210N} on either side of the framing. GypSerra® Metal frame work, designed in compliance with BS EN 14195 and manufactured using CR1 Grade Steel as per IS 513, having yield stress of 300MPa and tensile strength of 340MPa with surface finish of AZ150 as per IS 15961/AS 1397 and tested for 500hrs of salt spray test as per ASTM B117, includes 92x34x36x0.5mm GypSerra® C-Stud with lip of 6.5mm and H-cutout on web enabling the services to pass, having moment of inertia 115488mm4 about major axis, positioned at 305mm c/c in 94x32x32x0.5mm GypSerra® Floor Channel and 94x32x32x0.5mm GypSerra® Ceiling Channel with flanges bend at 5° acute angle. Floor and Ceiling Channel is anchored with Gyproc® Rawl plug Ø8x45mm having Pull Out strength of 6.8KN or Nail**, fixed at 600mm c/c in zig zag manner. 92x40x40x0.5mm GypSerra® Noggin Channel to be placed between the studs, behind the horizontal board joint. Inner and Outer layer of Gyproc® Boards to be Screw fixed with Gyproc®Drywall Screw of 25mm with 16nos per m2 and 35mm with 32nos per m2 at spacing of 600mm and 300mm respectively. Saint Gobain Make Twigainsul 50mm Glasswool of density 20kg/m3 shall be placed in Metal framework with the help of holding Clip. Edges and joints to be finished with Gyproc® Easi-Fill Hydro JC conforming to ASTM C475 and water absorption <5percentage as per EN 520 and Gyproc®Joint Fibre tape on outer board and Gyproc® Pro-Fill JC conforming to ASTM C475 on inner board. Periphery and cut-outs of the partition to be treated with suitable Fire and Acoustic Sealant.All other detailing and specifications to be followed as per approved drawing of Gyproc.Vendor to submit MTC. including Perforated GI Sheet. Rate shall include cost of making of all cut-outs for light fixtures, switchboards gadgets, gizmo, pelmets, grooves, beads and also provide support/template where ever required and For door frame fixing, storages, shelves, paneling etc extra Wooden members to be used shall be of CP teak wood only. Including skirting /MDF board/wooden skirting cut out as per EIC instruction at siteThe rate shall be in sq.mt for all floors and at all heights including all costs. including ply base for fixing of TV or Overhead storage wherever required, The rates are also inclusive of necessary scaffolding, tools, tackles,, safety measures , Internal partial support .The shop drawing (or a sample mock of 5 Sqm minimum of the frame work and partition) shall be approved from EIC and Architect. All exposed corner shall be covered with perforated angle as per manufacturer's specifications or as directed by EIC. Partition ht will be measured from finish floor to false ceiling level only. Work inclusive of above ceiling solid partition framework as per drawing. Contractor shall take care noise for transformation one Area to another area.

Partition : TYPE -4 : 300mm Thick Freestanding Partition with MS Support  Using Twin Frame Double Layer Drywall with Unplanned Loading both side : 3 Mtr Height Providing and Fixing upto 300mm thick Gypwall Habito Standard partition consist of GypSerra® (“Patented in India (325062)”) Twin Metal framework partition having maximum reachable height of 3000mm satisfying L/240 criterion at 200Pa, Partition comprises of double layer, tapered edge Gypsum Board, certified GreenPro by CII and strategic location of manufacturing plants results in lower carbon emissions. Partition comprises of double layer, tapered edge Gypsum Board, certified GreenPro by CII and strategic location of manufacturing plants results in lower carbon emissions. Partition includes inner layer of 12.5mm thick Gypboard®Plain ISI marked, conforming to IS 2095 Part 1:2011, having flexural strength – {Longitudinal > 500N and transverse > 180N} and outer layer of 13mm thick Gyproc® Habito® Standard with calcium sulphate dihydrate encased in high gsm paper liners with glass fibers and other additives for enhanced performance , class 1 rated (BS 476 -7) consists of tapered edge and dense core (with enhanced point load bearing capacity of upto 15kg on regular No.10 wood screw (of pull out strength of >is equals to300N ) ; having thermal conductivity 0.24w/m°k, tested as per IS 2095 Part 1 (Type D,F,R2), EN 520 (D,F,I,R) having flexural strength – {Longitudinal > 754N and transverse > 312N} on either side of the framing.Gypsteel Twin Closed Stud frame work.which includes 70x0.9mm Gypsteel Closed Stud, positioned at 610mm c/c in 72x32x32x0.5mm GypSerra® Floor Channel and72x32x32x0.5mm GypSerra® Ceiling Channel with flanges bend at 5° acute angle with required air gap between two framing and Floor Channel bracing at 900mm c/c. Floor and Ceiling Channel is anchored with Gyproc® Rawl plug Ø8x45mm having Pull Out strength of 6.8KN or Nail**, fixed at 600mm c/c in zig zag manner. 70x40x40x0.5mm GypSerra® Noggin Channel to be placed between the studs, behind the horizontal board joint. Inner and Outer layer of Gyproc® Boards to be Screw fixed with Gyproc®Drywall Screw of 25mm with 12nos per m2 and 35mm with 24nos per m2 at spacing of 600mm and 300mm respectively. Saint Gobain Make Twigainsul 50mm Glasswool of density 20kg/m3 shall be placed in Metal framework with the help of holding Clip. Edges and joints to be finished with Gyproc® Pro-Fill JC conforming to ASTM C475 and Gyproc®Paper tape. Periphery and cut-outs of the partition to be treated with suitable Fire and Acoustic Sealant.All the performance test are carried out at NABL accredited/ government approved lab.All other detailing and specifications to be followed as per approved drawing of Gyproc.Vendor to submit MTC. Rate shall include cost of making of all cut-outs for light fixtures, switchboards gadgets, gizmo, pelmets, grooves, beads and also provide support/template where ever required and For door frame fixing, storages, shelves, paneling etc extra Wooden members to be used shall be of CP teak wood only. Including skirting /MDF board/wooden skirting cut out as per EIC instruction at siteThe rate shall be in sq.mt for all floors and at all heights including all costs. including ply base for fixing of TV or Overhead storage wherever required, The rates are also inclusive of necessary scaffolding, tools, tackles,, safety measures , Internal partial support .The shop drawing (or a sample mock of 5 Sqm minimum of the frame work and partition) shall be approved from EIC and Architect. All exposed corner shall be covered with perforated angle as per manufacturer's specifications or as directed by EIC. Partition ht will be measured from finish floor to false ceiling level only. Work inclusive of above ceiling solid partition framework as per drawing. Contractor shall take care noise for transformation one Area to another area.

Wooden solid Partition finished with Both side VNR Laminate: Providing and fixing 12mm thick fire retardant marine plywood as per IS 710:2010 and IS 5509:2000 fixed on frame work on both side finish with 1mm thick Laminate. The frame work shall be made from square hollow aluminium section size of 50x50x1.5 mm and 25x50x1.5 mm of approved make conforming to IS code. The framework shall be fixed as per drawing vertically @ 600 mm c/c and horizontal 600 mm c/c horizontally. All ply/wooden shall be treated with anti- termite treatment . Both side finish with VNR Laminate. Rates shall also be inclusive of cost of making cut outs/ openings for MEP services and providing additional sections for strengthening around the openings/cutouts additional support for fixing of patch fittings for doors, making grooves between wall and board, in filled with termite treated wooden members if required or as per drawing /instruction of EIC. and no extra payment shall be considered for additional sections provided. work complete including all type of material, fittings, fixtures, Finish, loading, unloading, safety measures, transportation, all leads, accessories, groove, PVC edge banding, adhesive ,tape, headless nails, sample mockup, all floor, all levels, all heights etc complete as per detailed drawings, specifications and instruction of Client/EIC. only the clear elevation area shall be measured and paid. sample mock shall be approved from Architect/Client. Laminate: VNR series laminate. Rate shall include cost of making of all cut-outs for light fixtures, switchboards gadgets, gizmo, pelmets, grooves, beads and also provide support/template where ever required and For door frame fixing, storages, shelves, paneling etc extra Wooden members to be used shall be of CP teak wood only. Including skirting /MDF board/wooden skirting cut out as per EIC instruction at siteThe rate shall be in sq.mt for all floors and at all heights including all costs. including ply base for fixing of TV or Overhead storage wherever required, The rates are also inclusive of necessary scaffolding, tools, tackles,, safety measures , Internal partial support .The shop drawing (or a sample mock of 5 Sqm minimum of the frame work and partition) shall be approved from EIC and Architect. All exposed corner shall be covered with perforated angle as per manufacturer's specifications or as directed by EIC. Partition ht will be measured from finish floor to false ceiling level only. Work inclusive of above ceiling solid partition framework as per drawing. Contractor shall take care noise for transformation one Area to another area.

Thin Profile Glass Partition: Height up to 3 Mtr Providing and Fixing of STL45 ie.Single glazed modular system consist of Aluminium section of 100*55*1.5 mm thick. All sections duly Powder coated/anodised with 6063-T6 grade and required accessories ie glass to glass aluminium I sections, T section and 90 degree sections and Glass packing to adjust the floor level. Ceiling profile, Floor profile and wall profile are 25 mm visible face and 45 mm wide with 10mm toughen glass as per approved make and insertion of Thermoplastic gasket to adhere the glass firm and airtight.The sound reduction Value is from 32 to 35 Db.With 6 mm Groove inbuilt in system to accomodate the carpet and the uneven surfaces.Work including horizontal thin profile member at lintel lvl. as per drawing. Accessories/Hardware: neutral cure glazed and metal silicon sealant of approved make on the periphery of the glass and wood etc. Partition ht will be measured from finish floor to false ceiling level only. The rate shall be in sq.mt for all floors and at all heights including all costs. Glass width size shall be as per sugestion by EIC. Work complete including all type of material, fittings, fixtures, Finish, loading, unloading, transporation, all leads, accessories, safety measures, sample mockup, all floor, all levels, all heights etc complete as per detailed drawings, specifications and instruction of Client/EIC.

Panelling : Type 1 : 119.5mm thick_Independent Wall-lining :Impact Resistance Wall Lining using Habito Board and Unplanned Loading Can be Done Providing and Fixing GypSerra® Independent Wall Lining inner layer of 12.5mm thick Gypboard®Plain ISI marked,conforming to IS 2095 Part 1:2011, having flexural strength – {Longitudinal > 500N and transverse > 180N} and outer layer of 13mm thick Gyproc® Habito® Standard with calcium sulphate dihydrate encased in high gsm paper liners with glass fibers and other additives for enhanced performance , class 1 rated (BS 476 -7) consists of tapered edge and dense core (with enhanced point load bearing capacity of upto 15kg on regular No.10 wood screw (of pull out strength of >is equals to300N ) ; having thermal conductivity 0.24w/m°k, tested as per IS 2095 Part 1 (Type D,F,R2), EN 520 (D,F,I,R) having flexural strength – {Longitudinal > 754N and transverse > 312N}.92x38x38x0.7mm GypSerra® I-stud {Material-IS 513,Y/S-300Mpa, Finish - AZ150 (IS 15961)} placed at 610mm c/c in 94x32x32x0.5mm GypSerra® {Material-IS 513,Y/S-300Mpa, Finish - AZ150 (IS 15961} Floor and Ceiling channel. Floor channel is anchored to the floor using Gyproc® Rawl plug Ø8x45mm {Material-IS 513 CR1 grade, Zinc coating, Pull Out Load-6.8kN for M30 concrete grade} /Hilti Nail anchor fasteners at 600mm c/c in zig zag manner.Floor channel to be wrapped with 70μ Self Adhesive LDPE moisture barrier film to further improve corrosion resistance performance. A GypSerra® Fixing Strap {Material-IS 513,Y/S-300Mpa, Finish - AZ150 (IS 15961)} of 74x0.5mm width has to be provided at the horizontal joint of board. nner and Outer layer of Gyproc® Boards to be Screw fixed with Gyproc®Drywall Screw of 25mm with 12nos per m2 and 35mm with 24nos per m2 at spacing of 600mm and 300mm respectively. Finally square and tapered edges of the boards are to be jointed and finished so as to have a flush look which includes filling and finishing with Gyproc® Pro-Fill Jointing compound Air Dry (Conforms to ASTM C475), Gyproc® Joint Paper tape or Gyproc® Fibre tape. The junction of the partition with masonry and all penetration through the partition has to be treated with Acoustic sealant.All other detailing and specifications to be followed as per approved drawing of Gyproc.Vendor to submit MTC.

Panelling : Type 2 : Upto 800mm thick: Impact Resistance Wall Lining using Habito Standard Board and Unplanned Loading Can be Done Providing and Fixing GypSerra® C-stud Wall Lining upto 800mm wall thickness includes single layer 13mm thick Gyproc® Habito® Standard with calcium sulphate dihydrate encased in high gsm paper liners with glass fibers and other additives for enhanced performance , class 1 rated (BS 476 -7) consists of tapered edge and dense core (with enhanced point load bearing capacity of upto 15kg on regular No.10 wood screw (of pull out strength of >is equals to300N ) ; having thermal conductivity 0.24w/m°k, tested as per IS 2095 Part 1 (Type D,F,R2), EN 520 (D,F,I,R) having flexural strength – {Longitudinal > 754N and transverse > 312N} is screw fixed to C-stud which is placed adjacent to brick/RCC wall.34x70x36x0.5mm GypSerra® C-stud {Material-IS 513,Y/S-300Mpa, Finish - AZ150 (IS 15961)} placed at 610mm c/c in 94x0.5mm GypSerra® {Material-IS 513,Y/S-300Mpa, Finish - AZ150 (IS 15961} Floor and Ceiling channel. Floor and Ceiling channel is anchored to the floor and True ceiling using Gyproc® Rawl plug Ø8x45mm {Material-IS 513 CR1 grade, Zinc coating, Pull Out Load-6.8kN for M30 concrete grade} /Hilti Nail anchor fasteners at 600mm c/c in zig zag manner. 72x32x32x0.5mm GypSerra® Floor channel to be cut and bend for bracing at every 400mm c/c vertically.Diagonal bracing using 72x0.5mm Floor Channel at 45 Degree . Floor channel is fixed to brick wall with Sleeve Anchor (Ø6x40mm)/ Impact anchor or to RCC with Gyproc® Rawl Plug.Floor channel to be wrapped with 70μ Self Adhesive LDPE moisture barrier film to further improve corrosion resistance performance. A GypSerra® Noggin channel {Material-IS 513,Y/S-300Mpa, Finish - AZ150 (IS 15961)} of 70x0.5mm width has to be provided at the horizontal joint of board. Single layer of Gyproc® boards to be screw fixed with Gyproc® Drywall screws of 25mm at minimum spacing of 300mm at centre and 150mm at periphery. Finally square and tapered edges of the boards are to be jointed and finished so as to have a flush look which includes filling and finishing with Gyproc® Pro-Fill Jointing compound Air Dry (Conforms to ASTM C475), Gyproc® Joint Paper tape or Gyproc® Fibre tape. The junction of the partition with masonry and all penetration through the partition has to be treated with Acoustic sealant. All other detailing and specifications to be followed as per approved drawing of Gyproc.All other detailing and specifications to be followed as per approved drawing of Gyproc.Vendor to submit MTC.

Panelling : Type 3 : Upto 800mm thick :Impact Resistance Curvature Wall Lining using Habito Standard Board and Unplanned Loading Can be Done Providing and Fixing GypSerra® C-stud Wall Lining upto 800mm wall thickness includes single layer 13mm thick Gyproc® Habito® Standard with calcium sulphate dihydrate encased in high gsm paper liners with glass fibers and other additives for enhanced performance , class 1 rated (BS 476 -7) consists of tapered edge and dense core (with enhanced point load bearing capacity of upto 15kg on regular No.10 wood screw (of pull out strength of >is equals to300N ) ; having thermal conductivity 0.24w/m°k, tested as per IS 2095 Part 1 (Type D,F,R2), EN 520 (D,F,I,R) having flexural strength – {Longitudinal > 754N and transverse > 312N} is screw fixed to C-stud which is placed adjacent to brick/RCC wall.34x92x36x0.5mm GypSerra® C-stud {Material-IS 513,Y/S-300Mpa, Finish - AZ150 (IS 15961)} placed at 305mm c/c in 72x0.5mm GypSerra® {Material-IS 513,Y/S-300Mpa, Finish - AZ150 (IS 15961} Floor and Ceiling channel. Floor and Ceiling channel is anchored to the floor and True ceiling using Gyproc® Rawl plug Ø8x45mm {Material-IS 513 CR1 grade, Zinc coating, Pull Out Load-6.8kN for M30 concrete grade} /Hilti Nail anchor fasteners at 600mm c/c in zig zag manner. 72x32x32x0.5mm GypSerra® Floor channel to be cut and bend for bracing at every 400mm c/c vertically.Diagonal bracing using 72x0.5mm Floor Channel at 45 Degree . Floor channel is fixed to brick wall with Sleeve Anchor (Ø6x40mm)/ Impact anchor or to RCC with Gyproc® Rawl Plug.Floor channel to be wrapped with 70μ Self Adhesive LDPE moisture barrier film to further improve corrosion resistance performance. A GypSerra® Noggin channel {Material-IS 513,Y/S-300Mpa, Finish - AZ150 (IS 15961)} of 70x0.5mm width has to be provided at the horizontal joint of board. Single layer of Gyproc® boards to be screw fixed with Gyproc® Drywall screws of 25mm at minimum spacing of 300mm at centre and 150mm at periphery. Finally square and tapered edges of the boards are to be jointed and finished so as to have a flush look which includes filling and finishing with Gyproc® Pro-Fill Jointing compound Air Dry (Conforms to ASTM C475), Gyproc® Joint Paper tape or Gyproc® Fibre tape. The junction of the partition with masonry and all penetration through the partition has to be treated with Acoustic sealant. All other detailing and specifications to be followed as per approved drawing of Gyproc.All other detailing and specifications to be followed as per approved drawing of Gyproc.Vendor to submit MTC.

Gypsum panelling: The M/F wall lining includes 12.5mm Gypsum Board MR board, screw fixed with drywall screws of 25mm at 300mm centers to one side of 45X18X0.5mm Gypliner ceiling channel (0.5mm thick having 18mm flange each made of GI Steel) placed at 600mm center to center in 195X29.5X0.9mm fixing bracket at 900mm c/c with 25X25X0.5mm Gypliner angle at bottom and top of the channel such a manner that joints staggered to avoid leakage through joints. Fixing strip of 75X0.5mm should be installed at horizontal joint of boarding. Finally square and tapered edges of the boards are to be jointed and finished so as to have a flush look which includes filling and finishing with Jointing compound and Joint Paper tape. 50mm Glasswool of density 20kg/m3 should be placed in metal frame.Necessary fabrication with anticorrosive paint work , scaffolding, anchor fasting , bolting HILTI make with testing certified in scope of contractor)Rate shall include cost of making of all cut-outs for light fixtures, switchboards gadgets, gizmo, pelmets, grooves, beads cut out as per EIC instruction at siteThe rate shall be in sq.mt for all floors and at all heights including all costs. The shop drawing (or a sample mock of 5 Sqm minimum of the frame work and partition) shall be approved from EIC and Architect. Panelling item including openable shutter wherever required area and finish with the same material. Only the clear elevation area shall be measured and paid.

Alluminium Skirting : Providing and Fixing ofAluminium Skirting as per approved make having width of 75 MM X thickness of 2mm made out of 6063 Grade Aluminium alloy duly anodised as desired in the Ral Colour code decided by the architect having neat screw fixed arrangement with Rubber seal over it as per Manufacturers Specification. work complete as per the instruction of Architect. Rate shall inclusive of mock up sample, all materials, loading, unloading, transportation, placing at all floors and for all leads,all accessories as described in item description.

Clock Room_Desk : 1500 L x 450 D x 750 H mm : Table Top : Table top to be made up of 36mm thk prelaminated particle board with 2mm thick matching PVC edge banding. Understructure : Work top is supported on MS powder coated legs with MS powder coated Supporting Beams. Modesty Panel : MS powder coated perforated modesty panel considered below the table top. Prelam pedestal on castors : 400mm(L)x400mm(D)x650mm(H) The unit to be build prelaminated particle board having 2 drawers +1 filing unit with normal lock and reverse waterfall handle is considered. Flipopen (450mm x 150mm ) Aluminium Powder coated Flip open with a build Soft closure with Termination box below the table top to accommodate electrical and data socket. Cable Riser : MS powder coated vertical cable riser consider below the table top for wire entry from the floor. The work shall be done as per the detailed drawing , specifications, sample approved and as directed by the Architect/Client. The rate shall be for complete item inclusive of all material, labour, wastages, necessary tools and tackles, adhesives consumable hardware and required SS 304 grade ardware/accessories, grooves ,pvc edge banding, etc of approved make for all floors, all heights, all levels and all places within campus. Contractor shall do all the needful and shall fulfill Architect's design intent. No additional claims will be entertained for this. Contractor shall submit as per site condition shop drawing for modular furniture layout and send detail drawing for each furniture with 3D and plan section for approval of architect/client.

Security Guard Table and Stimulater Rm : Table with Drawer_1200 L X 600 D x 750 H Table Top : Table top to be made up of 36mm thk prelaminated particle board with 2mm thick matching PVC edge banding. Understructure : Work top is supported on MS powder coated legs with MS powder coated Supporting Beams. Modesty Panel : MS powder coated perforated modesty panel considered below the table top. Prelam pedestal on castors : 400mm(L)x400mm(D)x650mm(H) : The unit to be build prelaminated particle board having 2 drawers +1 filing unit with normal lock and reverse waterfall handle is considered. The work shall be done as per the detailed drawing , specifications, sample approved and as directed by the Architect/Client. The rate shall be for complete item inclusive of all material, labour, wastages, necessary tools and tackles, adhesives consumable hardware and required SS 304 grade ardware/accessories, grooves ,pvc edge banding, etc of approved make for all floors, all heights, all levels and all places within campus. Contractor shall do all the needful and shall fulfill Architect's design intent. No additional claims will be entertained for this. Contractor shall submit as per site condition shop drawing for modular furniture layout and send detail drawing for each furniture with 3D and plan section for approval of architect/client.

Ticketing Table : 2315 L X 600 D x 750 H mm Table Top : Table top to be made up of 25mm thk prelaminated particle board with 2mm thick PVC edgebanding and revserse waterfall edge banding. Flipopen (450mm x 150mm ) : Aluminium Powder coated Flip open with a build Soft closure with Termination box below the table top to accommodate electrical and data socket. Centre Panel (Inserted type) : 8mm thick laminated glass panel fixed above the table top with 300mm height. Raceway : MS Powder coated Vertical raceway considered below table top with Intermidate legs provided to allow the LAN and electrical Cables. Understructure : Work top is supported on MS powder coated legs with MS powder coated Supporting Beams. Modesty Panel : Ms powder coated perforated modesty panel considered below the table top. The work shall be done as per the detailed drawing , specifications, sample approved and as directed by the Architect/Client. The rate shall be for complete item inclusive of all material, labour, wastages, necessary tools and tackles, adhesives consumable hardware and required SS 304 grade ardware/accessories, grooves ,pvc edge banding, etc of approved make for all floors, all heights, all levels and all places within campus. Contractor shall do all the needful and shall fulfill Architect's design intent. No additional claims will be entertained for this. Contractor shall submit as per site condition shop drawing for modular furniture layout and send detail drawing for each furniture with 3D and plan section for approval of architect/client.

Work station_4050 L X 600 D x 750 H mm : 3 seater Table Top : Table top to be made up of 25mm thk prelaminated particle board with 2mm thick PVC edgebanding and revserse waterfall edge banding. Flipopen (450mm x 150mm ) : Aluminium Powder coated Flip open with a build Soft closure with Termination box below the table top to accommodate electrical and data socket. Centre Panel (Inserted type) : 8mm thick laminated glass panel fixed above the table top with 300mm height. Raceway : MS Powder coated Vertical raceway considered below table top with Intermidate legs provided to allow the LAN and electrical Cables. Understructure : Work top is supported on MS powder coated legs with MS powder coated Supporting Beams. Modesty Panel : Ms powder coated perforated modesty panel considered below the table top. work complete including all type of material, fittings, fixtures, Finish, loading, unloading, safety measures, transportation, all leads, accessories, groove, sample mockup,Shop drawing, all floor, all levels, all heights etc complete as per detailed drawings, specifications and instruction of Client/EIC. sample mock shall be approved from Architect/Client. Contractor shall submit as per site condition shop drawing for modular furniture layout and send detail drawing for each furniture with 3D and plan section for approval of architect/client.

Work station_4325 L X 600 D x 750 H mm : 3 seater : Do as per above specification for complete work.

Work station_2850 L X 600 D x 750 H mm : Do as per above specification for complete work.

Work station_2865 L X 600 D x 750 H mm : Do as per above specification for complete work.

Item Description

Keyboard with mouse tray : Providing and fixing key board as per approved make. Metal keyboard tray with Outer Dimension of the Keyboard tray is 507 x 245mm made of 1mm thick CRCA as per approved shade powder coating fixing with require all necessary acessories etc complete

CPU stand : Providing and fixing CPU trolly ebco or eqvilant approved make. CPU Trolley base is made of 1.6 mm thck CRCA and the sides are made of 1.2mm thick. The width of the trolley can be varied to accompany various width CPU. The CPU is mounted on lockable castors.

Pedestal Unit: Supply and Fixing of Prelam pedestal on castors of size 450mm(L)x450mm(D)x650mm(H) The unit to be build prelaminated particle board having 2 drawers +1 filing unit with normal lock and reverse waterfall handle is considered Rate shall inclusive of mock up sample, all materials, loading, unloading, transportation, placing at all floors and for all leads, all accessories as described in item description. As approval of EIC. All the work complete as per the detailed drawing , mock-up sample and instruction of Architect/EIC. Work complete as per the instruction of EIC.

Revolving chair : Supply and fixing of chair as per approved make and sample by Architect/ Client. * Back Frame in Moulded Nylon and PP with Mesh.* PU Moulded Cushion on Seat. * Back Lumber Support.* Nylon Mesh in Back with Adjustable Arms with PP Pad .* Chrome Base. Work complete including all necessary hardware and fittings , mock up sample, loading,unloading, transportation, placing at all floors and for all leads, all accessories as described in item description. Work complete as per the detailed drawing and instruction of Architect/Client. Model: Amardeep Low Back Evo 03

Mid Back chair: Supply and fixing of chair as per approved make and sample by Architect/ Client. * Back Frame in Moulded Nylon and PP.* PU Moulded Cushion on Seat. * Cushioned Back Lumber Support.* Nylon Mesh in Back with Adjustable Arms with PP Pad .* Synchronised single Lock Mechanism.* Chrome Base and Gas Lift. Work complete including all necessary hardware and fittings , mock up sample, loading,unloading, transportation, placing at all floors and for all leads, all accessories as described in item description. Work complete as per the detailed drawing and instruction of Architect/Client. Model: Amardeep Mid Back Clasp 02

Overhead storage : Overhead Storage with Laminate Finish : 450 mm Depth Storage Comprising from IS 303 BWR 19 mm thick and 12 mm ply, finish with 1 mm thick Laminate finish as per approved make and shade by Architect. Solid Shutter : 25 mm thick comprising from IS 303 BWR ply and finish with 1 mm thick Laminate . Shelf: 19 mm thk IS 303 BWR ply finish with both side approved laminate. Inner area shall be finished with linear laminate. Ledge/Niche comprising from HDF / Lacquered glass finish w, required lighting arrangement. The work shall be done as per the detailed drawing , specifications, sample approved and as directed by the Architect/Client. The rate shall be for complete item inclusive of all material, labour, wastages, necessary tools and tackles, adhesives , grooves , consumable hardware and required SS 304 grade hardware/accessories , Profile handle, Wooden frame, monocoat polish, pvc edge banding of approved make for all floors, all heights, all levels and all places within campus. Contractor shall do all the needful and shall fulfill Architect's design intent. No additional claims will be entertained for this. Laminate: VNR series laminate.

Open storage rack : Storage Comprising from IS 303 BWR and finish with 1 mm thick Laminate finish as per approved make and shade by Architect. Framing : 25 mm thick comprising from IS 303 BWR ply and finish with 1 mm thick Laminate . Shelf: 25 mm thk IS 303 BWR ply finish with both side approved laminate. Inner area shall be finished with linear laminate. The work shall be done as per the detailed drawing , specifications, sample approved and as directed by the Architect/Client. The rate shall be for complete item inclusive of all material, labour, wastages, necessary tools and tackles, adhesives , grooves , consumable hardware and required SS 304 grade hardware/accessories , Profile handle, Wooden frame, monocoat polish, pvc edge banding of approved make for all floors, all heights, all levels and all places within campus. Contractor shall do all the needful and shall fulfill Architect's design intent. No additional claims will be entertained for this. Laminate: VNR series laminate.

Console : Providing and fixing Console complete as per drawing/Ref Image. Approx size : 1500 x 400 x 1050 mm made from up of 19 mm thick BWR grade ply and finished of Laminate as per approved make and shade and solid wooden leg with matt finish monocoat polish as per drawing. Rate shall be inclusive of providing, fixing all necessary brass satin finish nickel plated/ S.S 304 grade (hardware from Hettich like Auto Hinges, handle, Rod locks, Multipurpose lock, Rate shall be inclusive of 2nos. of drawer unit of 19mm thick IS 303 BWR ply and laminate, PVC edge beading. All external and internal exposed woodwork to be finished in PU semi gloss paint finish polish as per specified item's manufacturer's specifications. Rate shall inclusive of providing mock up sample for approval of architect. Laminate: VNR series laminate.

Seating : Type 1 : 2100 x 450 x 450 mm Providing and fixing as per ref image , seating base Comprising of Solid teak wood frame PU matt finished polish. The seat shall be in high density PU foam with leather fabric finish and finished in Approved fabric upholstery and back - back side finish with ply 303 and laminate finish /with SS leveler as per the drawing/image and instruction from Architect/EIC. all external and internal exposed woodwork to be finished in PU matt finish polish. The work shall be done as per the approved shop drawing (to be prepared by contractor), specifications, sample approved and as directed by the Architect and Engineer-in-charge. The rate shall be for complete item inclusive of all material, labour, wastages, necessary tools and tackles,approved make for all floors, all heights, all levels and all places within campus. Contractor shall do all the needful and shall fulfill Architect's design intent. No additional claims will be entertained for this. Rate shall inclusive of shop drawing ,mock up sample, all materials, loading, unloading, all taxes, transportation, placing at all floors and for all leads,all accessories as described in item description. As approval of architect. Basic Rate of Fabric : 800/- Rmt

Seating : Type 2 : 2400 x 450 x 450 mm : Do as per above specification for complete work.

Seating Type 3 : 1700x450 x450 mm x 4 Nos : Cluster : Do as per above specification for complete work.

Seating Type 4 : 1200 x 1200 x 450 mm x 1 cluster : Do as per above specification for complete work.

Seating : 4500 x 500 x 450 mm : Do as per above specification for complete work.

Seating : 3600 x 500 x 450 mm : as per above specification for complete work.

Seating : 2700 x 500 x 450 mm : as per above specification for complete work.

Seating : 1800 x 500 x 450 mm : as per above specification for complete work.

Roller Blinds : Providing and fixing blinds as per approved make as per suggested shade and spring drive system with steel ball chain/one touch with speed control action roller blind with end brackets with head rail, components, bottom bar. Fabric : screen classic 1percentage to 3percentage .Fabric value : 470 Gsm ,Thickness : 0.60 to 0.70 mm Construction: 75 percentage PVC and 25 percentage Polyster Fabric to be as per approved sample. All the work complete as per the detailed drawing , mockup sample and instruction of Architect/EIC. All complete as per approval of designer. The mode of Measurement: The size of the blind will be measured from end to end bracket (Left to Right bracket) height will be measured from top of the pelmet to sill bottom level and clear opening size only there will be not extra payment towered overlapping.and mockup sample approved by the Architect/ EIC.

Accoustic Panelling : Providing and fixing wall acoustical panelling with using CS55 and IC91 framing directly to the wall and then fixing 12.5mm perforated board with the help of screw and using rockwool of 50kg density and 50MM thick between framing and perforated sheet then Fixing Ecotone make Marco polyester fiber acoustic wallpaneling with the specification of 9MM thick having density of1.90kg/m2 with NRC value of 0.80 surface matt finish which is fixed with solution SR505 asrequired. The panel should have euro class BASTME84-13 fire rating. The color shade of Panel as approved by Architect. Including all accessories, material and labor complete as directed by Engineer. Including surface preparation, Including cost of all type of tools, tackles, all labour, scaffolding, transportation, cleaning, at all floor, all level, all depth, all Height, all lead and lift etc. etc. work complete as per the detailed drawing, approved sample, specifications and instruction of Architect/EIC. Sample mock shall be approved from Architect/EIC. Only the clear elevation area shall be measured and paid."

Laminate Panelling : Providing and fixing 12mm thick fire retardant marine plywood as per IS 710:2010 and IS 5509:2000 fixed on frame work finish with 1mm thick Laminate. The frame work shall be made from square hollow aluminium anodised section size of 50x50x1.5 mm and 25x50x1.5 mm of approved make conforming to IS code. The framework shall be fixed as per drawing vertically @ 600 mm c/c and horizontal 600 mm c/c horizontally. All ply/wooden shall be treated with anti- termite treatment . Measurements for paneling work to be recorded upto finished false ceiling level only irrespective of aluminium frame work, which shall be provided from gr. level to RCC slab / beams soffit level. Rates shall also be inclusive of cost of making CNC/engraving /cut outs/ openings for electrical fixtures, tube lights /air-conditioners ,grills, diffusers etc and providing additional sections for strengthening around the openings/cutouts additional support for fixing of patch fittings for doors, making grooves between wall and board, in filled with termite treated wooden members if required or as per drawing /instruction of EIC. and no extra payment shall be considered for additional sections provided. All curved surfaces, recesses, waffles shall be part of the paneling including openable shutter wherever required area and finished with the same material.Work complete including all type of material, fittings, fixtures, Finish, loading, unloading, transportation, all leads, accessories, groove, adhesive, tape, headless nails, sample mockup, all floor, all levels, all heights etc complete as per detailed drawings, specifications and instruction of Client/EIC. only the clear elevation area of finished plywood wall paneling with Laminate shall be measured and paid. sample mock shall be approved from Architect/Client. The rate shall be for all floors, at all heights, all shapes including CNC / Engraving and all costs. Laminate: VNR series laminate.

Hanging Graphic: Providing and Fixing of Large Format Hanging Graphic Signage to be installed indoor for long term durability (10 yrs) to be backed by Warranty from Provider, attached with durable chains, base structure to be made of Aluminum / Metal Frame (coated / uncoated) with / without backing , cladded with Aluminum / Flex / Fabric / Cast Vinyl overlaid with / without Acrylic Letters. Performance: Lighting designed to meet required lux levels per client specifications Rate shall inclusive cost of fixtures, gadgets, gizmo, pelmets, grooves, beads and also provide support/ template where ever required.The rate shall be in sq.mt for all floors and at all heights including all costs .

Digital Artwork : Providing and Fixing of PANKO Digital Artwork Custom Printed on Durable Polymeric Vinyl Media with Protective Matt Overlaminate, Printed on HP Latex as approved by Architect, suitable for Direct Application on POP finish, ceilings, elevator doors, partitions, pillars, aluminum cladding etc. Work complete including all necessary fittings , Design approval from architect, mock up sample, loading, unloading, transportation, placing at all floors and for all leads, all accessories as described in item description. Work complete as per the detailed drawing and instruction of Architect/Client. Basic rate of wallpaper is Rs. 330 / Sq.ft

Signage : Entry Exit Totem : LED : 1200 x 4800 x 300 : Floor standing Design , Supply, Installationat location a signs M.S internal hollow tube structure using Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminium homogeneous billet) with Premium grade Anodizing (Thickness 15-20 microns) International standards, with 10 years warranty under normal working conditions. Sign is including all extruded aluminium profiles profiles including i) 4 base profiles mill finished glossy appearance or texture, base profile with slots to accomodate 50x 50 mm , 100x50 mm or 150x 50 mm,(to create max depth of 200 mm from either of the combination aftet mounting base and cover profiles, M.S structure and 'V' notch groove to guide self tapering screws,directly to be screwed with ,Internal M.S structure with help of stainless steel high tensile strength zinc coated self tapering CSK screws (length as per requirement) ii) 4 cover profiles of eliiptical shape premium anodised with intel- locating faciltiy with base profile for posiotioning. to be screwed with base profile (screws not visible from outside) after cover profile is mounted to base iii) Top and bottom ACP egde profile premium grade anodised to cover edges of ACP free mounting without drilling or screwing. iv) ACP connect profile with minimum display free mounting without lockuing and drilling. etc ,Ultra violet print on ACP or ACRYLIC sheet can be done. Also, arrangement is done to (ACP or Acrylic 3 mm thick can be Inserted in Cosign totem profile slots). Top hat asper profile shape (aluminium 2-3 mm thick) is used to cover top part, 2mm thick opaque white acrylic(or clear)can be pasted on text panels as numbers with help of 3M make adhesive.also LED (Back lite) modules or edge lite modules. CosignTotem profiles screwed fixed with internal M.S structure are installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge. Work complete including all type of material, fittings, fixtures, Finish, loading, unloading, transporation, all leads, accessories, sample mockup, all floor, all levels, all heights, etc complete as per drawings, specifications and instruction of Client/EIC.

Signage : Changeable Snapframe :451 x 625 x 20 : Wall : Nonlite Design , Supply, Installation of signage comprising from Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminium homogeneous billet) with Premium grade Anodizing (Thickness 15-20 microns) as per International standards, with 10 years warranty under normal working conditions. Sign flip profiles with 32 mm visible border.Sign has high quality plastic moulded base with slightly flexible in nature, with wall mountiing screw position hidden beneath the flip profiles. and installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge. Work complete including all type of material, fittings, fixtures, Finish, loading, unloading, transporation, all leads, accessories, sample mockup, all floor, all levels, all heights, etc complete as per drawings, specifications and instruction of Client/EIC.

Signage : Door Name plate Sign : 400 x 93 x 12 : Door/Wall NonLite : Design , Supply, Installation of signage comprising from Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminium homogeneous billet) with Premium grade Anodizing (Thickness 15-20 microns) as per International standards, with 10 years warranty under normal working conditions. Sign is single sided with 1 aluminium profile click fitted on 2 plastic moulded endcaps.Sign is including all plastic injection moulded end caps black in shade which are directly press fitted ,media can be flat bed UV printed on panels/ profiles.Cosign make MPI panels fitted and installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge. Work complete including all type of material, fittings, fixtures, Finish, loading, unloading, transporation, all leads, accessories, sample mockup, all floor, all levels, all heights, etc complete as per drawings, specifications and instruction of Client/EIC.

Signage : Drinking Water Sign : 500 x 93 x 12 : Door/Wall : NonLite Design , Supply, Installation of signage comprising from Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminium homogeneous billet) with Premium grade Anodizing (Thickness 15-20 microns) as per International standards, with 10 years warranty under normal working conditions. Sign is single sided with 1 aluminium profile click fitted on 2 plastic moulded endcaps.Sign is including all plastic injection moulded end caps black in shade which are directly press fitted ,media can be flat bed UV printed on panels/ profiles.Cosign make MPI panels fitted and installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge. Work complete including all type of material, fittings, fixtures, Finish, loading, unloading, transporation, all leads, accessories, sample mockup, all floor, all levels, all heights, etc complete as per drawings, specifications and instruction of Client/EIC.

Art Frames : Art frame Stellar : 600 x 600 x 50 : Wall Photoluminescent Art Work Design , Supply, Installation of signage comprising from Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminium homogeneous billet) with Premium grade Anodizing (Thickness 15-20 microns) silver anodised shade as per International standards, with Lifetime warranty under normal working conditions. Frame consisting of media accommodation depth of 15 mm with overall depth of profile of 51 mm approx. Frame consisting of ART springs to hold media firmely on profile slots. Installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge. Work complete including all type of material, fittings, fixtures, Finish, loading, unloading, transporation, all leads, accessories, sample mockup, all floor, all levels, all heights, etc complete as per drawings, specifications and instruction of Client/EIC.

Passage Hanging Signs : MPI Suspended : 500 x 187 x 20 : Ceiling : Non Lite : Informative Design , Supply, Installation of signage comprising from Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminium homogeneous billet) with Premium grade Anodizing (Thickness 15-20 microns) as per International standards, with 10 Years warranty under normal working conditions.Sign is double sided with 2 aluminium profiles connected with each other with 2 plastic moulded endcaps.Galvanised iron multistrand twisted 2 mm diameter wire (upto1.5 meter in length) with Stainless steel eco-suspension clips screw fitted directly in ceiling (rigid base) engaged with wire stainless steel eco suspension clips with wire adjustment mechanism.Sign is including all plastic injection moulded end caps black in shade which are directly press fitted ,media can be flat bed UV printed on panels/ profiles.Cosign make MPI panels fitted and installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge. Work complete including all type of material, fittings, fixtures, Finish, loading, unloading, transporation, all leads, accessories, sample mockup, all floor, all levels, all heights, etc complete as per drawings, specifications and instruction of Client/EIC.

Map Signages : 600 x 600 x 10 mm : Wall : Photoluminescent : Mandatory Design , Supply, Installation of signage comprising from Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminium homogeneous billet) with Premium grade Anodizing (Thickness 15-20 microns) as per International standards, with 10 years warranty under normal working conditions. Profile to form frame with overall depth of 10mm with media of thickness upto 2 or 3 mm. Cosign make I Sign Fix profile with M.S zinc coated corners with star headed screws. Installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge Work complete including all type of material, fittings, fixtures, Finish, loading, unloading, transporation, all leads, accessories, sample mockup, all floor, all levels, all heights, etc complete as per drawings, specifications and instruction of Client/EIC.

Toilet Door Sign : 450 x 93 x 12 mm : Door/Wall : NonLite : Informative Design , Supply, Installation of signage comprising from Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminium homogeneous billet) with Premium grade Anodizing (Thickness 15-20 microns) as per International standards, with Lifetime warranty under normal working conditions.Sign is single sided with 1 aluminium profile click fitted on 2 plastic moulded endcaps.Sign is including all plastic injection moulded end caps black in shade which are directly press fitted ,media can be flat bed UV printed on panels/ profiles.Cosign make MPI panels fitted and installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge. Work complete including all type of material, fittings, fixtures, Finish, loading, unloading, transporation, all leads, accessories, sample mockup, all floor, all levels, all heights, etc complete as per drawings, specifications and instruction of Client/EIC.

Handicap toilet ; 550 x 250 x 12 mm : Door/Wall : NonLite : Informative Design , Supply, Installation of signage comprising from Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminium homogeneous billet) with Premium grade Anodizing (Thickness 15-20 microns) as per International standards, with Lifetime warranty under normal working conditions.Sign is single sided with 1 aluminium profile click fitted on 2 plastic moulded endcaps.Sign is including all plastic injection moulded end caps black in shade which are directly press fitted ,media can be flat bed UV printed on panels/ profiles.Cosign make MPI panels fitted and installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge. Work complete including all type of material, fittings, fixtures, Finish, loading, unloading, transporation, all leads, accessories, sample mockup, all floor, all levels, all heights, etc complete as per drawings, specifications and instruction of Client/EIC.

Lift Signs : 200 x 93 x 12 mm : Door/Wall : NonLite : Informative Design , Supply, Installation of signage comprising from Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminium homogeneous billet) with Premium grade Anodizing (Thickness 15-20 microns) as per International standards, with 10 years warranty under normal working conditions. Sign is single sided with 1 aluminium profile click fitted on 2 plastic moulded endcaps.Sign is including all plastic injection moulded end caps black in shade which are directly press fitted ,media can be flat bed UV printed on panels/ profiles.Cosign make MPI panels fitted and installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge. Work complete including all type of material, fittings, fixtures, Finish, loading, unloading, transporation, all leads, accessories, sample mockup, all floor, all levels, all heights, etc complete as per drawings, specifications and instruction of Client/EIC.

Emergency Exit Sign : 310x225x55 mm : Ceiling : Lite Design , Supply, Installation of signage comprising from emergency exit sign- illuminated, surface mount (wall or ceiling) Dual sided made up of plastic material , battery backup of 3 hours (180 mins) .Battery life of 300 cycles of charge and discharge Li- ion battery 3.7 Volt, 100 mA, Charge time of 24 hours. Input voltage 220-240 Volt A.C, 50/60 Hz. Viewing distance 30 meter, degree of protection IP20 (rating for protection against solid object upto 12 mm) white light colour full back (white colour) LED illumination with green white coloured graphic inserted on both sides on 0.4 mm PC (sizes, texts, symbols or graphics as per standard safety norms and regulations) graphic options of -left ,right, up staircase down staircase. Test facilty button self test plus auto self test, opreration in maintained and non maintained mode (power saver mode).Sign with 12 months warranty for electric circuit and 6 months warranty for battery. Sign provided with dual mounting arrangement of mounting on wall and celing both ( with flat rigid support/base).Sign is including all connection wires (upto 1 mtr) and high tensile strength zinc coated self tapering screws (4 nos with screw wall plastic packing), installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge.

Main Building Signage : Led Channel Letters : Letter Height - 750 mm : Hall of Space and Hall of Science Design , Supply and installation of 3 inch embozz Stainless Steel Channel letters with 3mm acp female and 3mm day night acrylic in front having led of Samsung/GOQ having 5 years warranty and power supply of Union/Hi-sign with 3 years warranty. Work complete including all type of material, fittings, fixtures, Finish, loading, unloading, transporation, all leads, accessories, sample mockup, all floor, all levels, all heights, scaffolding ,etc complete as per drawings, specifications and instruction of Client/EIC.

8mm Opaque white Acrylic Letters CNC Cut (300mm) Height bonded with VHB Tape Design , Supply and installation of 8mm Opaque white Acrylic Letters CNC Cut (300mm) Height bonded with VHB Tape . Work complete including all type of material, fittings, fixtures, Finish, loading, unloading, transporation, all leads, accessories, sample mockup, all floor, all levels, all heights, scaffolding ,etc complete as per drawings, specifications and instruction of Client/EIC.

Writable with magnetic glass board : Providing and fixing 04mm SGG Pristine Tan Glossy Finish writable and Magnetic CEP board on existing partition/wall as per approved sample by Architect/Client. work Including cost of all type of fittings , accessories , tools, tackles, all labour, scaffolding, transportation, cleaning, at all floor, all level, all depth, all Height, all lead and lift etc. etc.work complete as per the detailed drawing, approved sample, specifications and instruction of Architect/EIC. Sample mock shall be approved from Architect/EIC.Only the clear elevation area shall be measured and paid.

Door Mat : Providing and fixing at entrance heavy traffic door mat 3M™ Nomad™ Terra a durable, flexible open mesh structure of vinyl ribs, featuring a continuous Z-patterned surface The open mesh structure allows high amounts of dirt and debris to be retained from traffic and fall through the mat for easy cleaning Contractor shall provide 3M™ Mat Edging Roll, High Profile, recessed mat including periphery metal profile for flush finishing with flooring for extreme traffic applications above 5,000 crossings per day. This entrance mat allows trolley traffic and is UV resist

Providing and fixing High performing textile entrance mat 3M™ Nomad™ Aqua Textile Drop Down Mat 85 : with advanced water removal and retention properties – stops up to 80 percentage of dirt and moisture at the door for high traffic applications (1500 to 5000 crossings per day)Phthalate-free, slip-resistant PVC backing at toilet block Contractor shall provide 3M™ Mat Edging Roll, High Profile, recessed mat including periphery metal profile for flush finishing with flooring.

Fixing of 1 mm thick VNR laminate on existing finish material . Work complete including all type of material, fittings, fixtures, Finish, loading, unloading, transportation, all leads, accessories, groove, adhesive, tape, headless nails, sample mockup, all floor, all levels, all heights etc complete as per detailed drawings, specifications and instruction of Client/EIC. only the clear elevation area of finished Laminate shall be measured and paid. sample mock shall be approved from Architect/Client. Basic rate of VNR laminate is 50/Sq.ft

Base(Platform) : 450 to 600 mm Ht Providing and fixing required Fabrication work for levelling of stage ht up to 450 to 600 mm as per exhibit requirment finished with structure ply. Facia finish with wooden beading matching with paint including concealed LED lighting etc complete Work complete including all type of material, fittings, fixtures, Finish, loading, unloading, transportation, all leads, accessories, groove, adhesive, tape, headless nails, sample mockup, all floor, all levels, all heights etc complete as per detailed drawings, specifications and instruction of Client/EIC.

Base(Platform) : 300 to 450 mm Ht : Do as per above specification for complete work.

Base(Platform) : 150 to 300 mm Ht : Do as per above specification for complete work.

Landscaping Work: Soil Treatment labour charges with Materials , labour work is Apply good Earth soil ,River send soil,manure ,cocopeat,Rice husk mixer in lawn Area with proper mixing and lavelling 100 to 125 MM Lawn grass and Plantation Areas .

Carpet lawn : Providing and planting the carpet lawn as per approved sample. work including the Levelling, Rolling, Pre-planting, Watering , Trimming , all labour , tools , tackles , maintenance with 30 days or more till the grass forms a thick lawn, etc and planting the readymade Carpet Lawn Grass in the form of approved 30 x 30 cm size slabs etc compiete as per detail specification.

Plantation Areas labour charges labour work is Apply good Earth soil ,River send soil,manure mixer in lawn Area with proper mixing and lavelling than After plantation

Ficus panda : 11X11 : Supplying and planting of as per under noted varieties, with ht. as specified in drg., including excavation of pit as required , removal of excavated earth to desired location filling the pit with soil mixture etc. and including sweet soil suitable to palms as per specifications and as directed complete in all respect including watering and nurturing the trees. The plant may be planted individually in rows or in cluster as per direction in drg. and all plant material and its sizes and height/girth and crown should be shown to the landscape architect/ Project Manager and written approval to be sought before planting.

Topiary : Do as per above specification for complete work.

Plumbing ( PHE): Providing and fixing concealed center point to wall ceiling and floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete.[A] 15 mm.

Providing and fixing concealed center point to wall ceiling and floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete. [B] 20 mm.

Item Description

Providing and fixing concealed center point to wall ceiling and floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete. [C] 25 mm.

Providing and fixing concealed center point to wall ceiling and floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete. [D] 32mm.

Providing and fixing concealed center point to wall ceiling and floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete. [E] 40mm.

Providing and fixing concealed center point to wall ceiling and floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete. [F] 50mm.

Prviding and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer in Carge (external Works) 65mm nomical Dia pipes

Prviding and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer in Carge (external Works) 80mm nomical Dia pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) Ball Valves. 15mm Dia

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) Ball Valves. 32mm Dia

Providing and Supplying ISI Mark CI D/F Butterfly Valves as per IS:13095 (Latest Edition) of following class and diamter including all taxes, insurance, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to departmental stores, stacking etc. complete. 14.1.A Butterfly valves IS 13095 with ISI mark PN 1.0 65mm dia

Providing and Supplying ISI Mark CI D/F Butterfly Valves as per IS:13095 (Latest Edition) of following class and diamter including all taxes, insurance, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to departmental stores, stacking etc. complete. 14.1.A Butterfly valves IS 13095 with ISI mark PN 1.0 80mm dia

Providing and supplying C.I. Air valves of approved make and quality of following class and diameter including taxes, insurance, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to departmental stores, stacking etc. complete. Air Valves single (S2) Type 25mm

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure poluthene pipes of the following outside Dia. Low densidy, complete with special falnge compression type fittings, wall clipsetc. including making good the wall ceiling and floor.(D) 40mm

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure poluthene pipes of the following outside Dia. Low densidy, complete with special falnge compression type fittings, wall clipsetc. including making good the wall ceiling and floor.(E) 50mm

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure polythene pipes of the following outside Dia. Low densidy, complete with special falnge compression type fittings, wall clipsetc. including making good the wall ceiling and floor.(F) 75mm

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure poluthene pipes of the following outside Dia. Low densidy, complete with special falnge compression type fittings, wall clipsetc. including making good the wall ceiling and floor.(G)110 mm

Providing and fixing in position cowel went to pipes. (B)75mm dia.

Providing and fixing in position cowel went to pipes.(C) 110mm dia.

Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. :75 mm dia

100 mm dia

Providing and fixing Futura Make Square flat cut, Satin-matt finish - 150mm x 150mm with Grating, making necessary slab/ wall/ beam holes and cutting walls, etc. complete.

Providing and fixing PVC SWR TYPE B P Trap of 110 X 110 mm diameter with Height riser/ necessary 110MM Diameter of distance piece for wash basin/ sink drain connection with cockroach trap - square flat cut, Satin-matt finish - 150mm x 150mm of Futura Make, making necessary slab/ wall/ beam holes and cutting walls, etc. complete.

Providing and fixing PVC SWR TYPE B P Trap of 110 X 110 mm diameter with Height riser/ necessary 110MM Diameter of distance piece for urinal drain connection with floor clean out square cut 150mm- Satin of Futura Make, making necessary slab/ wall/ beam holes and cutting walls, etc. complete.

Providing and fixing floor clean out square cut 150mm- Satin of Futura Make with making necessary slab/ wall/ beam holes and cutting walls, etc. complete.

Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter with jali of the following nominal diameter of self cleansing design with C.I scread down or hinged grating including the cost of cutting and making good the walls.

Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 75 mm diameter with jali of the following nominal diameter of self cleansing design with C.I scread down or hinged grating including the cost of cutting and making good the walls.

Making Khurras 45x45cm with average minimum thickness of 50 mm. cement concrete 1:2:4 (1 cement:2 coarse sand :4 graded stone aggregate of 20mm nominal size) over P.V.C. sheet 1mx1mx400micron, finished with 12mm cement plaster 1:3 (1 cement: 3 coarse sand) and a QUOTE of neat cement rounding the edge sand making and finishing the outlet complete depth as per site requirement.

Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15cm diameter not less than 440grams.

Providing and Supplying of Class SN8 structured wall Polythelene piping systems (Pipe with online/offline coupler and elastomeric sealing ring) with non-smooth External Annular corrugated and smooth internal surfaces (Double Wall) for non pressure underground Sewerage and Drainage application as per EN:13476-3 incuding all local and central taxes, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to the departmental stores etc. complete (ID Dia). Pipe Dia. ID 250mm

Providing and laying Cement concrete 1:5:10 (1-Cement : 5-Fine sand :10-Graded stone aggregate 40mm nominal size) bedding for stoneware pipes of following internal diameters with necessary formwork and curing complete.(B) 150mm dia. (166mm Ave. bed thickness)

Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and water tight C.I. cover with frame of 300mm x 300mm size (inside) with standard weight.(i) Square mouth traps. (A) 100mm x 100mm size P type. (upto 10 ton)

Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with briocks having croshing strength not less than 35Kg. Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm intenal dimensions total weight of cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete.(i) Inside dimensions 455mmx 610mm and 450mm deep for single pipe line. (upto 10 ton)

Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-cement :2-coarse sand : 4-graded stone aggregate 20mm nominal size) foundation concrete 1:3:6 mix (1-cement : 3- coarse sand :6-Brick bats 40 + 50mm size) inside plastering 15mm thick with Cement Mortar 1:5 (1-Cement : 5-coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix (1-Cement :2-Coarse sand :4-stone aggregate 20mm nominal size) finished smooth complete including curing and festing (i) Inside size 900mm x 1200mm and 1.5M. deep including C.I. cover with frame size 560mm diameter total weight of cover and frame to be not less than 128 kgs. (Wt. of cover 64 Kg. and Wt. of frame 64 Kg.)(A) With 230mm thick walls of brick msonry using brick having crushing strength not less than 35Kg. / Sq.cm. in Cement Mortar 1:5 (1- Cement: 5-Coarse sand) (1) A type depth 0.90 Metre for 150mm diameter sewer.

(I) Extra rate for constructing B.B. masonry for every additional depth of 0.1M. or Part thereof over item No.24.27 (I) for depth from 0.9M to 1.5M.

Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-cement :2-coarse sand : 4-graded stone aggregate 20mm nominal size) foundation concrete 1:3:6 mix (1-cement : 3- coarse sand :6-Brick bats 40 + 50mm size) inside plastering 15mm thick with Cement Mortar 1:5 (1-Cement : 5-coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix (1-Cement :2-Coarse sand :4-stone aggregate 20mm nominal size) finished smooth complete including curing and festing (i) Inside size 900mm x 1200mm and 1.5M. deep including C.I. cover with frame size 560mm diameter total weight of cover and frame to be not less than 128 kgs. (Wt. of cover 64 Kg. and Wt. of frame 64 Kg.)(A) With 230mm thick walls of brick msonry using brick having crushing strength not less than 35Kg. / Sq.cm. in Cement Mortar 1:5 (1- Cement: 5-Coarse sand) (2) B type depth 1.50 Metre for 150mm diameter sewer.

ELECTRICAL WORK SECTION: PANELS: Providing and erecting weather proof, dust and vermin proof, floor mounted front operated outdoor type double door cubical panel board necessary IP-54 and above protection as per approval from engineer incharge made from 14 SWG thick CRC M.S. sheet for outer body and doors, 16 SWG thick CRC M.S.sheet for internal partitions with necessary accesories , supporting angles/ flats channel including cutting, bending, drilling, welding, riveting with internal partitions and cable alley as per requirements and instruction of engineer-in-charge with erection of supplied switch gears, BUSBARS, suitable size of inter connecting PVC copper wire / copper-aluminium strips, rubber grommets, rib, bakelite control fuses/MCB for measuring instruments, earth bus and earth bolts, foundation flange - bolts-base Plates, sufficient nos. of hinged doors, handles with locking arrangement and rubber gasket,heavy duty end terminal connection,danger notice board,necessary ventilation,earthing strip complete. The Panel shall be painted with epoxy powder coating. (The rates excludes the cost of switchgears, bus bars, inter connecting mains and Copper Aluminium strips, meters, Fuses etc. The dimension shall be measured excluding base beams) The panel shall be supplied with following approved manufacturers with following size. (B) The standard companies switch gear shall be used and only manufacturers at CPRI approved factory ., Supply, Installation, Testing and Commissioning of Main LT Panel as per SLD and Specification.

Supply, Installation, Testing and Commissioning of UPS PANEL (OUTGOING) as per SLD and Specification

Supply, Installation, Testing and Commissioning of LIFT Panel as per SLD and Specification

Supply, Installation, Testing and Commissioning of EXTERNAL LIGHTING Panel as per SLD and Specification

Point wiring for Light / Bell with 2-1.5 sq.mm and earthwire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in following type of pipe to be erected concealed in/ on surface on wall/ceiling complete with 6A Modular type switch / bell push and accessories and earth continuity of following type, erected on PVC / Metallic box, single mounting base frame covered with textured/metallic front plate modules erected on / in wall / ceiling as per pipe erected, with necessary Lamp holder/ceiling rose / H.D.Connector as directed. (a) with medium class Rigid PVC pipe and accessories CAT III

Point wiring for secondary light point with 2-1.5 sq.mm and earthwire of 1.5 sq.mm (green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in following type of pipe to be erected concealed in / flushed on wall/ceiling, complete with earth continuity and necessary connection with primary light with accessories erected on Metal / PVC box covered with 3 mm thick PC(Polycarbonet) / Acrylic sheet for open / concealed wiring. with necessary Lamp holder / ceiling rose / H.D.Connector as directed. (a) with medium class Rigid PVC pipe and accessories

Point wiring for FAN with 2-1.5 sq.mm and earthwire of 1.5 sq.mm (Green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated multistrand copper wires, in following type of pipe to be erected concealed in / flushed on wall/ceiling complete with 6A Modular type switch and hum free EME four or more step type electronic fan regulator with separately mounted and accessories with earth continuity of following type erected on PVC / Metallic box, single mounting base frame covered with textured/metallic front plate modules erected on / in wall / ceiling as per pipe erected. with necessary ceiling rose / H.D.Connector as directed. (a) with medium class Rigid PVC pipe and accessories.CAT III

Point wiring for Looped Plug with 6A Modular type switch and 5 pin socket erected on PVC / Metallic box, single mounting base frame covered with textured / metallic front plate modules erected on / in wall / ceiling with following type accessories. CAT III

Point wiring for Individual Plug with and earthwire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in following type of to be erected concealed in / on surface of wall / ceiling complete with Modular type switch and 5 pin Plug erected on PVC / Metallic box covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following type of accessories. For 6A Plug with 2-1.5 sq.mm Cu. Wire with medium class Rigid PVC pipe and accessories CAT III

Point wiring for Individual Plug with and earthwire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in following type of to be erected concealed in / on surface of wall / ceiling complete with Modular type switch and 5 pin Plug erected on PVC / Metallic box covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following type of accessories.[III] For 16A Plug with 2-2.5 sq.mm Cu. Wire (a) with medium class Rigid PVC pipe and accessories.CAT-III

Point wiring for Individual Plug with and earthwire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in following type of to be erected concealed in / on surface of wall / ceiling complete with Modular type switch and 5 pin Plug erected on PVC / Metallic box covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following type of accessories.[III] For 16A Plug and 16 amp switch with 2-4 sq.mm Cu. Wire with 2.5 sq.mm ( green) earthing wire from mcb d b board. (a) with medium class Rigid PVC pipe and accessories.CAT-III

Providing and erecting Switch board for Computer or electric apparatus consisting of following items in single board erected on PVC / Metal board with 3 mm thick PC (Polycarbonate) / Acrylic sheet erected as directed for [B] modular type accessories 1 no. 6A/16A universal plug-switch combined. CATIII 3 nos. 6A Switch 3 nos. 6A 5 pin Plug

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size (a) with medium class Rigid PVC pipe and accessories (a) 2 wire 1.5 sq. mm

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size (a) with medium class Rigid PVC pipe and accessories (B) 2 wire 2.5 sq. mm

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size. (a) with medium class Rigid PVC pipe and accessories (A) 2 wire 4 sq. mm

Supplying and erecting approved make oscillating type bracket fan A.C. 23OV. 50cy/s 400/450 mm sweep wall mounted with height adjustment and rotary tilting device complete with guard, flexible Core plug top complete erected with lead wires as directed.

Item Description

Supply, Installation, Testing and Commissioning of suitable sweep, BEE 5 Star rated, Ceiling fan with Brush Less Direct Current (BLDC) permanent ferrite magnet Motor, class of insulation: B, Rust free 3 nos.Aluminium blades, 2 nos. canopies, shackle kit with earthing provision, copper winding, Power factor not < 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM,230v (tolerance as per IS : 374-2019), THD < 10percentage, with remote unit for Speed Control and all remaining accessories including safety pin, nut bolts, washers, temperature rise is equals to 75 degree C (Max.), suitable for 140 to 285 Voltage and rectifier circuit with surge, over current and overload protection , 50 Hz, Single phase AC Supply, earthing etc. Complete as required.[ Make shall be approved by Engineer in Charge] (B) 1200 mm Sweep (48")

Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or Fan box.

Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe down rod erected duly painted for fan complete with necessary 24/ O.20, 3 core flexible wire with earthing.

Supplying and erecting fan hook box of 10 mm M.S. round bar bounded to the RCC bars up to 50mm length each side and pierced through a 16 Gauge M.S. box / Heavy Duty PVC box complete erected concealed in Ceiling with necessary finishing.

Supplying and erecting approved make low noise decorative Exhaust fan having size 200mm with 1350 RPM with square frame ABS body with inbuilt lowers and square frame.

Supplying and erecting Electronic Type Cordless Call Bell erected on PVC/Metal board having portable bell push working on D.C. and bell on 230V A.C. supply with cells / battery

Supplying and erecting Approved make call bell indicator with buzzing sound and Red light indicating lamp with Red light button to attend the call suitable for 240 v 50 c/s supply to be erected.

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 and 3, IEC 61439-1 and 3 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used) suitable for (A) single phase incoming and horizontal single phase outgoing. (b) sheet steel double door (IP-43). (iv)12 way

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 and 3, IEC 61439-1 and 3 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used) suitable for (B) three phase incoming and single phase horizontal type outgoing Per phase isolation type (PPI). (b) sheet steel double door. (iii)8 way

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 and 3, IEC 61439-1 and 3 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used) suitable for (B) three phase incoming and single phase horizontal type outgoing Per phase isolation type (PPI). (b) sheet steel double door. (iv)12 way

providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to operate on 240 V A.C. system and having breaking capacity 10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark Cat.III

Providing and erecting 240 V MCB double pole switch for lighting Load (B Curve) having 10 KA breaking capacity and confirms to IS : 8828 in existing box having following capacity (B) 40 Amp. Cat.III

Providing and erecting 240 V MCB double pole switch for motor and inductive load (C Curve) having 10 KA breaking capacity and confirms to IS : 8828 in existing box having following capacity (A) 6 to 32 Amp.

Providing and erecting 240 V MCB double pole switch for motor and inductive load (C Curve) having 10 KA breaking capacity and confirms to IS : 8828 in existing box having following capacity (B) 40 Amp.

Providing and erecting 415 V MCB Four Pole for Motor and Inductive Load (C Curve) having 10KA breaking capacity and confirms to IS :8828 in existing box having following capacity (a) 6 to 32 Amp. Cat.III

Providing and erecting 415 V MCB Four Pole for Motor and Inductive Load (C Curve) having 10KA breaking capacity and confirms to IS :8828 in existing box having following capacity (b)40 Amp. Cat.III

Providing and erecting 415V MCB Four Pole Switch for Lighting Load (B curve) having 10KA breaking capacity and confirms to IS :8828 in existing box having following capacity (b)40 Amp. Cat.III

Providing and erecting 415 V MCB Four Pole for Motor and Inductive Load (C Curve) having 10KA breaking capacity and confirms to IS :8828 in existing box having following capacity C) 63 Amp. CAT-III

Approved make ELCBs / RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit withstand capacity of 6 KA and suitable for operation on single phase 240 V. having characteristic of quick action and tripping with all advance feature and do not incorporate any electronic component. for following Max. rating erected as directed (i) 40 Amps.DP Cat. III

Approved make ELCBs / RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit withstand capacity of 6 KA and suitable for operation on single phase 240 V. having characteristic of quick action and tripping with all advance feature and do not incorporate any electronic component. for following Max. rating erected as directed (i) 63 Amps.DP Cat. III

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables ., (C) 3 1/2 core 50 Sq. mm ( 25 Sq.1/2 mm core)

(H) 3 1/2 core 185 Sq. mm ( 95 Sq. mm 1/2 core)

(J) 3 1/2 core 300 Sq.mm ( 150 Sq. mm 1/2 core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cable. (A) 3 core 2.5Sq. Mm

(B) 3 core 4 Sq. mm

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables., (A) 4 core 16 Sq. mm

(B) 4 core 25 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. (A) 2 to 4 core 2.5 / 4 Sq. mm

(D) 2 to 4 core 16 Sq. mm

(E) 2 to 4 core 25 Sq. mm

Providing and, fixing heavy duty flange type brass double compression type cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. (A) 3 core 35/50 Sq. mm

Providing and, fixing heavy duty flange type brass double compression type cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. (G) 3 and 1/2 core 185 Sq. mm

(I) 3 and 1/2 core 300 Sq. mm

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool and connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (A) 1.5/ 2.5/4/6 Sq.mm

(C) 16/25 Sq.mm.

(D) 35/50 Sq.mm.

( I ) 185 Sq.mm.

(K) 300 Sq.mm.

Providing and fixing approved make Ladder type cable tray. Made from M.S sheet. The cable tray should be bended as per IS 2062/1079 shall be fabricated of double bended channel section longitudinal members with single bended Channel section. Rungs of members welded to the base of the longitudinal members at 250 mm c/c spacing . as per IS and shall be coated with hot dip galvanizing as per IS 2629/4759. with coupler plate / Fish plate and GI hardware like nut - bolt and washers etc. erected on existing support as per Specification and as per instruction of engineer in charge.. (10) 150 X 100 X 1.6 mm Thick

(16) 900 X 100 X 2.0 mm Thick

Providing and fixing approved make Perforated C type cable tray. Made from pre- galvanized sheet steel. The cable tray should be bended as per IS 2062/1079 . with max 17.5percentage perforation with coupler plate / Fish plate and GI hardware like nut - bolt and washers etc. erected on existing support as per Specification and as per instruction of engineer in charge. (7) 600 X 50 X 1.5 mm Thick

Supplying under floor pregalvanised corrosion proof rectangular sheet steel cable trunking of 1.6 mm thick having with stand point load up to 1.33 Ton and free from seepage of concrete of screed water with all accessories,Junction Box,Joints as required and demanded by engineer-incharge and laying/erecting as per OEM guidelines and as per instruction of engineer incharge having following size of dimensions and No of compartments (W x D x T) Cat-III., [7] 50mm x 38mm x 1.6 mm with One Compartments

[8] 75mm x 38mm x 1.6 mm with one compartments

[9] 100mm x 38mm x 1.6 mm with One Compartments

[10] 150mm x 38mm x 1.6mm with Three Compartments

[11] 225mm x 38mm x 1.6mm with Three Compartments

[13] 300mm x 38mm x 1.6 mm with Three Compartments

Providing and erecting 16 gauge HGS conduit pipe (as per IS) painted black surface/concealed of following size complete to be erected on/in wall or ceiling with erected with necessary saddles, screws, bends, junction boxes etc. with following (Nominal Bore) dia of pipes, in approved manner as directed ., (1) 19/20 mm

Item Description

Supplying and laying UPVC cable trunking system comprising unplasticised polyvinyl, chloride rigid material with ignition free and flame proof confirming BS with necessary end caps Internal and external bend, flat bends, coupler, tee etc..All necessary accessories and measuring of following sizes., (1) 75 mm x 50 mm trunking

(2) 100 mm x 50 mm trunking

(3) 50 mm x 50 mm trunking

(4)100 mm x 50 mm trunking with TWIN compartment With clip in divider

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall or ceiling erected with necessary PVC fittings and Junction boxes fixed with adhesive solution and Clamps with following dia of pipes, in approved manner as directed (b) 25 mm

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall or ceiling erected with necessary PVC fittings and Junction boxes fixed with adhesive solution and Clamps with following dia of pipes, in approved manner as directed (c) 32 mm

Supply and installtion of expanding firestop foam equivalent to Hilti CP 620 on both sides of wall, with minimum 2 hours fire rating when tested in accordance with UL 1479/ASTM-E 814, for horizontal openings in floors or slabs made of concrete/ masonry or Gypsum after passing service lines like cable trays or cables/cable bundles. The expanding foam expands seven times its volume to fill the cavity at the time of dispensing the material and shall fully cure within two minutes after dispensing. The product shall be age tested as per Dafstb and DIBT standards. The product shall provide water tightness when tested for W rating as per UL standards and shall carry test certificate for sound insualtion of 50 db when tested in accordance with ASTM E 90. The product shall carry test certificate for mold resistance rating of 0 as determined by ASTM G21-96 and shall have a VOC content of approx. 1.3 g/l as per LEED 2009. The product shall be tested in accordance with IEC 60068-2-57:1999-11 (Environmental Testing) as per Part 2-57: Test for Vibration-Time-history method and VERTEQII for seismic zone 4. The system shall be UL listed and classified. The system shall be UL and FM approved.

Supply and installation of Fire stop mortar system equivalent to Hilti CP 636 , with minimum 2 hours fire rating when tested in accordance with UL 1479/ASTM-E 814 standards, for horizontal openings in floors or slabs after passing service lines like cables/cable bundles, cable trays etc. The mortar shall be a light weight cementitious product and shall carry test certificate in accordance with IEC 60068-2-57:1999-11 (Environmental Testing) as per Part 2-57: Test for Vibration-Time-history method and VERTEQII for seismic zone 4. The product shall be age tested as per Dafstb and DIBT standards. The product shall carry test certificate for mold resistance rating of 0 as determined by ASTM G21-96. The product shall be age tested as per Dafstb and DIBT standards.The system shall be UL listed. The gaps around inaccessible or complicated openings shall be sealed with exapnding firestop foam.

Supply and installatio of Acrylic Firestop Sealant equivalent to Hilti CP 606 in gaps between wall and slab made of concrete/masonary/gypsum on both sides of wall to provide minimum 2 hours fire rating when subject to the test conditions of UL 2079 standards. The product shall be age tested as per DafStb guidelines. The product shall be age tested as per Dafstb and DIBT standards.Sealant should provide sufficient MAF, water and gas tight seal. Sealant shall also provide airborne sound transmission reduction (STC of 50) and shall be tested as per DIN 52210 for sound insulation. Sealant shall carry test certificate for mold resistance rating of 0 as determined by ASTM G21-96 and should have a VOC content of approx. 75 g/l as per LEED 2009. The sealant shall carry test certificate in accordance with IEC 60068-2-57:1999-11 (Environmental Testing) as per Part 2-57: Test for Vibration-Time-history method and VERTEQII for seismic zone 4.

Providing and erecting HOT deep Galvanised iron strip wire 8 to 16 SWG.

Providing and erecting required size HOT deep Galvanised iron strip for earthing of H.T. , OCB/ ACB/ Transformer LT panel board, Motors etc. using proper clamp.

Providing and erecting required size Copper strip for earthing of H.T. OCB / ACB/ Transformer, LT panel board, Motors etc. using copper clamp.

Supplying and erecting in earthpit of minimum bore dia. 225mm size approved make Safe Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of 80 mm having 80-200 Micron galvanising, Inner pipe dia of 40 mm having 200-250 Micron galvanising, connection terminal dia of 14 mm with constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for following type of applications with chamber and heavy duty cover.(approved make OEM has to submit test certificate including value of earth resistane of installation. [C] For Electrical Installation covering Transformer Neutrals, Lightning arrester Earthing, A.C.Plant and Sensitive Computer System(like Automation, SCADA)i.e. independent Earthing located in other than normal soil i.e. Soft Rock, Marshy Soil etc.. -Length of Pipe : 3 Mtrs. -Back filling Compound :2 nos Bags of 25 Kg.

Supplying and erecting approved make online Un-interruptible Power Supply system comprising flat cum-boost charger with IGBT base rectifier and Inverter and sealed maintenance free SMF batteries. The charger having operating capacity for input 160-270V AC and inverter having output 230V,50 Hz Ac with 0.8 load power factor with battery, over/under voltage output with over load and short circuit protection equipment. The system housed in CRC sheet duly powder coated paint with following power backup.with MS painted batteries stand, 10percentage Overload capacity for momentary load. [L]40 KVA 3 - phase with 1Hr Backup

"Supply Installation Testing Commisioning of Recess/Surface mounted/suspended 3 wire Track System . Should be available in Black/white body color it will be decided by architect. Should be using 3 wire system. Should be able to connect using interconnectors. The product should be Manufactured in India (all the Components should be manufactured in India except the Led source which can be imported . Approved Make.: ERCO/LIGHTING TECHNOLOGIES/PHILIPS/FORMA LIGHTING"

"Supply Installation Testing Commisioning of Indoor deep Recessed Round downlight 18-21W Recess Mounted Round backlit downlighter with below features 1. Pressure die cast Aluminum alloy housing for better thermal conductivity. 2. PS diffuser for optimum light transmission. Round Version. 3. Efficacy of Fixture more then or equal to 85 Lumens /watt Available with 5700K, 4000K and 3000K CCT. 4. CRI>80 High efficiency Mettalic driver with inbuild surge protection, over voltage protection, short circuit protection and operating at >0.9 PF. <5percentage THD 5. LED life of more then 35000 Hrs @ L70. Approved makes : Philips,Havells, Wipro,Tisva

Supply Installation Testing Commisioning of Indoor Office Lighting 2x2 Fixture 35-38w with below specifications 1. Single Pressure die cast Aluminum alloy housing for better thermal conductivity and extremely low weight . 2. Efficacy of Fixture more then or equal to 85 Lumens /watt Available with 6500K,5700K, 4000K OR 3000K CCT. 3. CRI>80, High efficiency driver with inbuild surge protection, over voltage protection, short circuit protection and operating at >0.9 PF. <5percentage THD 4. LED life of more then 35000 Hrs @ L70. 5. Suitable for Grid and POP mounting . Approved Make.: WIPRO/TISVA/HAVELLS/LIGHTING TECHNOLOGIES/PHILIPS"

"Supply Installation Testing Commisioning of Indoor deep Recessed Round:PHASE CUT DIMMABLE: COB downlight 18-21W Recess Mounted Round 36-40 DEGREE COB downlighter with below features 1. Pressure die cast Aluminum alloy housing for better thermal conductivity. 2. . Round Version. 3. Efficacy of Fixture more then or equal to 85 Lumens /watt Available with 5700K, 4000K and 3000K CCT. 4. CRI>80, High efficiency driver with inbuild surge protection, over voltage protection, short circuit protection and operating at >0.9 PF. <5percentage THD 5. LED life of more then 35000 Hrs @ L70. 6. SHOULD COME WITH PHASE CUT DIMMABLE REF :TISVA LIGHTING (USHA INTERNATIONAL LTD) recess mounted die cast ORRIN 20w Approved makes : Philips,Havells, Wipro,Tisva

"Supply Installation Testing Commisioning of Indoor deep Recessed Round COB downlight 18-21W Recess Mounted Round 36-40 DEGREE COB downlighter with below features 1. Pressure die cast Aluminum alloy housing for better thermal conductivity. 2. . Round Version. 3. Efficacy of Fixture more then or equal to 85 Lumens /watt Available with 5700K, 4000K and 3000K CCT. 4. CRI>80, High efficiency driver with inbuild surge protection, over voltage protection, short circuit protection and operating at >0.9 PF. <5percentage THD 5. LED life of more then 35000 Hrs @ L70. REF :TISVA LIGHTING (USHA INTERNATIONAL LTD) recess mounted die cast ORRIN 20w Approved makes : Philips,Havells, Wipro,Tisva

"Supplying, Installation, testing and erecting of Indoor Linear Curved Lighting 34W-38w Suspended profile as per required measurments with below features Extuded Aluminum alloy housing for better thermal conductivity. Powder coated using Nano technology for longer durability. PS diffuser for optimum light transmission for better task lighting. Efficacy of Fixture 95 Lumens /watt Available with 5700K, 4000K and 3000K CCT. CRI>80 High efficiency Mettalic driver with inbuild surge protection, over voltage protection, short circuit protection and operating at >0.9 PF. <5percentage THD LED life of 50000 Hrs @ L70. IP20 Protection Luminaire performance and Safety :IEC 60598, IS 10322-5, IS 161-03/05/06/07, Surge : IEC 61000-4-5, EMC : EN 55015. Should be be in formation to make a chandelier as per reuierd design Approved makes : Philips,Havells,Lighting technolgies, Wipro,Tisva

Supplying and erecting approved make IP 55 grade Company fabricated Timer Panel of following capacity for switch On-Off street lights on time scheduling basis made from 16G CRCA sheet duly epoxy power painted inside and outside with hinged doors and locking arrangement consisting of suitable size of 4 Pole MCB and 4 pole contactor (cat-III)with analog time switch, auto manual switch of same make and suitable input and output Bakelite terminals and with door earthing approved by Engineer in charge. (B) 40 Amp

Providing and laying approved make Double walled corrugated pipes (DWC) of polyethylene(conforming to IS 14930 II )with necessary connecting accessories of same material at required depth in existing trench for laying of cable. below ground / road surface for enclosing cable. (A)50 mm outer dia

Providing and laying approved make Double walled corrugated pipes (DWC) of polyethylene(conforming to IS 14930 II )with necessary connecting accessories of same material at required depth in existing trench for laying of cable. below ground / road surface for enclosing cable. (B)63mm outer dia

Making trench in Hard Murrum / Tar Road of suitable width of 90 cm or required depth for laying any size of cable or locating the fault all over the run and back filling the same and making the surface as normal ground.

Covering of cable with second class bricks or cement tiles laid cover the cable crosswise and also on both sides with covering of 7. 5 Cm. layer of sand above and below cable (16 bricks per meter)

Providing and erecting iron clad cable route marker duly marked with ELE.CABLE of size 23 cm.X 12 cm. Flushed with ground in cement foundation as directed by Engineer in charge.

Providing and laying. R.C.C. Hume pipe for cable to be laid 90 cm. below ground across the road crossing or on floor with necessary material in an approved manner and making the ground as per original. (C) 300 mm dia

(E)150 mm dia

Supply, Installation, Testing and Commissioning of 450mm x 450mm wide x 600mm Deep Electrical Manhole with 450mm circular cover. Above sizes shall be internal, complete with Civil Structure and Required drain.

Supply, Installation, Testing and Commissioning of 1200mm x 1200mm wide x 1200mm Deep Electrical Manhole with 450mm circular cover. Above sizes shall be internal, complete with Civil Structure and Required drain.

Supplying and erecting approved make online Un-interruptible Power Supply system comprising flat cum-boost charger, static Inverter and sealed maintenance free SMF batteries. The charger having operating capacity for input 160-270V AC and inverter having output 230V,50 Hz Ac with 0.8 load power factor with battery, over/under voltage output with over load and short circuit protection equipment. The system housed in CRC sheet duly powder coated paint with following power backup.with MS painted batteries stand, 10percentage Overload capacity for momentary load.(C) 3 KVA with 1Hr Backup

Providing following type of Modular Type Accessories mounted with pvc / metallic box, single mounting base frame covered with textured / metallic front plate , modules erected with necessary connection. As desired by Engineer In charge.Modem Jack for Telephone Open RJ-11 CAT III.

Supplying and erecting approved make Telephone Cable electrolytic copper conductor PE insulation twisted in two pairs, and wrapped with FRLS PVC tape and sheathed with FRLS PVC or HFFR outer Jacket suitable for telephone wiring and confirming to C-DOT erected in existing pipe. of following size of conductors and nos.of pairs. With necessary connections. [A] Conductor Size 0.5 mm. 2) Two Pairs - APPROX QTY - IT WILL MAEGER BY VENDOR

Providing and erecting main Distribution (MDF) indoor type, back mounted frame. (c) Suitable for 20 pair

Supplying and erecting ETERNITY GENX Platform with CPU and AC Power Supply Hardware Platfrom for Unified Communication Server or Universal Media Gateway • Max. Universal Slots 12 • Max. IP Trunks: 99 (license-free) • Max. IP Users: 999 • Max. VOCODER Channels: 128 • Max. VMS Channels: 64 • Mounting: 19 inch 4U enclosure Note: VOCODER and VOICEMAIL hardware modules are not included. 12SAC/12SDC/12SPSBB with SARVAM UCS SME (FACTORY LOADED).Expansion Card for Analog Extensions (SLT) • SLT Ports: 20 • Compatible PBX: ETERNITY GENX and GE Series

Supplying and erecting push button type telephone instrument having speaker phone Caller ID and hands free dialling system and 30 memories with display system (a) Single line BPL / SONY/ BEETEL or equivalent make.

Supply, installation, testing and commissioning of Providing following type of Modular Type Accessories mounted with pvc / metallic box, single mounting base frame covered with textured / metallic front plate , modules erected with necessary connection. As desired by Engineer In charge.Modem Jack for Computer Open RJ-45 CAT III.

Supply, Installation, testing and commisioning of Wire less WiFi Router with below specification Networking Interface : (1) 10/100 Ethernet Port Buttons : Reset Antennas ,Power Method : Passive Power over Ethernet (12-24V) Power Supply : Included 24V, 0.5A PoE Adapter Maximum Power Consumption : 6 W Maximum TX Power : 27 dBm BSSID : Up to Four Per Radio Power Save : Supported Wireless Security : WEP, WPA-PSK, WPA-TKIP,WPA2 AES.

Item Description

2 MP IP Motorized Vandal Dome Camera Supply, installation, testing and commissioning of 2MP Motorized IR Vandal Dome Camera, 1/2.8" CMOS, Up to 1920x1080@30fps,Dual IR Cut Filter with Auto Switch,Color:0.002Lux@(F2.0,AGC ON), Fixed Progressive Distance up to 30m,2.7 ~13.5 mm Motorized Lens, Smart H.265+/H.265, 120Db WDR,Tripwire, Perimeter,Human/Vehicle Classification VCA support,Built-in Micro SD card slot up to 512 GB, ANR support, Built in Audio Support,1 RJ45 10M/ 100M self adaptive Ethernet port ,G.711A/G.711U,4 regions Motion Detection,Mask Alarm,IP Address Conflict ,ONVIF(PROFILE S/T/G),IP66,IK10,Audio I/O 1/1, Alarm I/O 1/1, Surge Protection, Camera should support external AI, NDAA comply,BIS Make: Avtron/Axis/Pelco/Avigilon/ Hanhwa

2MP 25X Starlight IP PTZ Camera, 360 Pan Range, Supply, installation, testing and commissioning of 2MP PTZ 33X Zoom, Optical zoom: 25×, digital zoom 16× 1/2.8" Starlight sensor,1080P@30fps, PoE+, Autotracking, 200m IR, Three stream support,120Db WDR, , focal length 4.6mm~152mm, Speed 0.1°~200°/s, Low Iux 0.001Lux, TVS 6000V protection; Audio I/O 1/1, Alarm I/O 1/1,MicroSD card(512GB), ANR support, (Tripwire, Double Tripwire, Perimeter, Object Abandon, Object Lost, Loitering, Running, Parking, Crowed, People Counting, Crowed, On Duty Detection, Video Abnormal, Audio Abnormal, Heatmap, Safety Helmet Detection, Human/Vehicle Classification) VCA support,Onvif Profile S/T/G/M, IP66,Camera should support external AI, NDAA comply,BIS Make: Avtron/Axis/Pelco/Avigilon/ Hanhwa

Supplying and erecting approved make LAN cable of following size in existing pipe as per direction [D] CAT - 6e ( For LAN, Telephone and Camera). QTY VERIFY BY VENDER

Network Video Recorder. Supply and installation of Network Video Recorder 64 Channel,connected camera at up to 16MP resolution,2×HDMI and 2×VGA Independent outputs,HDMI Video output at up to 4K resolution,8 SATA interface, up to 10TB for 1 HDD, Smart H.265+/H.265/Smart H.264+/H.2646MP,Bandwidth: Income 640Mbps; Outgoing 320Mbps,2 RJ-45 Ports (10/100/1000Mbps),ONVIF (PROFILE S/T/G),Alarm I/O:16channel in;4channel out, Raid:JBOD,RAID0,RAID1,RAID5,RAID6,RAID10, (Tripwire;Double Tripwire;Perimeter;Object Abandon;Object Missing;Loiter;Running; Parking;Lens Dignose;Scene Switch Dignose;Signal Abnormal Detection;Signal Loss Detection;On Duty Detection;Crowd Detection) VCA support, BIS, Make: Avtron/Axis/Pelco/Avigilon/ Hanhwa

Supply, Installation, Testing and commissioning of 8 TB Surveillance series Hard disk

SITC of Jack Panel, fully loaded with 24 nos. UTP ports for PCB based IO Jacks (RJ45, TIA-568C Category-6, Installation and Termination of all 24 nos. Catergory-6 UTP , unloaded with individually replaceable 24 nos. Category-6 I/O Jacks complying with TIA-568.C.2, as per given jack specification Shall be suitable for loading unshielded and shielded jacks for different category systems (CAT 6 and CAT 6A)

SITC of company fabricated patch cords shall conform to Cat- 6 and conductor shall be stranded for better flexibility Shall support network line speeds up to 1 Gbps Shall have RJ-45 jacks. (A) 1 Mtr

SITC of 24 x 10/100/1000BASE-T PoE ports 4 x Gigabit RJ45/SFP Combo ports Advanced L2 switching and security features L2+ Static Routing Optional “standard mode” or “surveillance mode” management user interface 193 W PoE budget

SITC of 24 x 10/100/1000BASE-T NON POE ports 4 x Gigabit RJ45/SFP Combo ports Advanced L2 switching and security features L2+ Static Routing Optional “standard mode”

Providing and Erecting Netwrok rack with following capacity with Necessary cooling fan,Cable manager,6A PDU,equipment rack with necessary mounting accessories. (A) 9 U

Providing and Erecting Netwrok rack with following capacity with Necessary cooling fan,Cable manager,6A PDU,equipment rack with necessary mounting accessories. (E) 17 U

PA System : Supply, Installation, Testing and Commissioning of Wall or celling Mounted 2 way Passive Speaker ,having power 40W RMS, LF Transducer  6.5" Woofer, HF Transducer 1" Tweeter and frequency range of 80 Hz - 20 KHz. APPROVED MAKE :- Bi-amp, Apart, Kramer

Supply, Installation, Testing and Commissioning of wired mic system for pagging or annocement

Installation, Testing and Commisiong of CABLE AND CONFIGRATION

Supply and Installation of Cabinet Type Exhaust Fans Unit with 25+/-2 mm single-Skinned , 0.6 mm PPGI Outer Skin, 0.6 mm Plain GI Inner Skin, Non-Thermal Break Aluminum Profiles, Plug Type Fans with base frame, class-H rated for 250 deg C at 2 hours, VFD Compatible Motors. Connection falnges to be included in the machine. Specifications as below, Fans to have Exhaust Cowl AND GI safety wire mesh screen on exposed face. GI wire mesh and vibration isolator pads cost to be included in item rate. Area Exhaust air FOR GROUND FLOOR AND FIRST FLOOR (Placed on Terrace) Air Qty. is equals to 12500 CFM Static Pressure is equals to 20 mm Wg Fan Speed is equals to Not exceeding 1000 rpm Outlet Velocity is equals to Not exceeding 14 m/s., Cabinet fan as described above. Make : DeltaT

VENTILATION LOGIC CONTROL PANEL WITH ELECTRICAL STARTER PANEL AS PER FOLLOWING LOGIC CONTROL PLC PANEL WITH STARTER PANEL for Ventilation and Smoke Evacuation System with Potential free contacts for Fire signal and complete with Ammeter, Volt meter etc to perform the logical operation of speed change in fans from Low to high speed based on the CO Level in the Area. The panel to include VFD Starters with DOL By Pass Starters for all the exhaust fans (6 Nos). The control is envisaged for all these fans to be switched on in full speed incase of receipt of FIRE Signal. PLC should be compatible to take signal from CO sensors and operate the exhaust fans based on signal from CO sensors / FAS panel. In case of Fire the PLC should signal all AHUs and TFA to stop.

Electrical Cabling Work: 3C x 4 Sqmm FRLS Copper Armoured Cable (For tube Axial Exhaust Fans)

Supply, installing, testing and commissioning of Analog type Carbon Monoxide sensors with coverage area of sensor is minimum 250 sq.mtr. with integration to PLC based control and starter panel Make : Danfoss/Honeywell

Supply, Installation, Testing and Commissioning of Galvanised Iron Duct : 24 G

Supply, Installation, Testing and Commissioning of Galvanised Iron Duct : 22 G

Supply, Installation, Testing and Commissioning of Galvanised Iron Duct : 20 G

SITC of Return Air Grills air Linear Grill made out of extruded aluminum construction powder coated without volume control damper in Al consutruction and painted in black. make : System air

SITC of high velocity Air curtain with the velocity profile of21 to 30 m/s to suit to door dimension. The motor shall suitable for 415±10percentage volts, 3Phase,50Hz,4 wire elecrical power supply,curtain MOC-MS Powder Coated and Blower Aluminium. Make : Euronics

Providing and erecting Bluestar Water Cooler 200/400 with 200 Litre cooling capacity and 400 Litre Storage Capacity

Supplying and erecting 5 stage single Industrial reverse osmosis water purification system with M.S. powder coated frame, prefilter housing with 'O' ring presediment filter GAC filter, carbon filter suitable buster DC pump capacity 80 psi, mention with inline type post carbon filter auto low and high pressure switches with following size of storage tank and LPH capacity and erected as directed with one year comprehensive maintenance guarantee. [C] 250 Ltr / Hr with 250 psi 2 nos booster pump

FIRE FIGHTING : Providing laying, testing and commissioning of 'B' class heavy duty G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete. in ground including welding, excavation and providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required. 150 mm. Dia

Providing, laying, testing and commissioning of 'B' class heavy duty G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 50mm dia

100mm dia

Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required :Single headed Gunmetal

Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal/Stainless Steel cap and chain as required :Single headed Gunmetal

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : 100mm dia

150mm dia

Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange and landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required.

Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required : 150mm dia

Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required : Gun Metal

Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve and nozzle. Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve and M.S. Pipe and socket. 40m

Supplying and fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required : Gun Metal

Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required : 2 way-100 mm dia M.S. Pipe

Providing and fixing of pressure switch in M.S. pipe line including connection etc. as required.

Providing and fixing flow switch in following sizes M.S. pipe including connection etc as required. 100mm dia

Providing and Fixing of fire extinguishers with necessary accessories, stand, trolley, etc., ISI Marked portable fire extinguisher, 4.5 kg CO2 type fire extinguishers complete in all respect including initial fill and wall suspension brackets and shall conform to IS 2878

Providing and Fixing of fire extinguishers with necessary accessories, stand, trolley, etc., ISI marked Fire Extinguisher, Dry Chemical powder type capacity 6 kgs conforming to IS : 2171 including first fill and wall suspension bracket.

Providing and Fixing of 5 kg Modular Clean Agent Ceiling Mounted Fire Extinguishers.

Charges for Liasoning with CFO and getting all approvals and permissions and NOC 's required for fire fighting at various stages and after completion of the project. (All official and receipted payments would be submitted and Re- imbursed) Taking approval /NOC form CFO

Supplying, installation, testing and commissioning of Photo luminescent non toxic, non radioactive, maintenance free self glowing exit signs comprising zinc sulphide chargeable crystals which can glow in dark; printed on U-1000 photo luminiscent aluminium sheet 1.0 mm thick containing luminiscent 111 as base chemical cover with UV stabilized coating job complete with SS screws for wall mounting or to be hanged on rust proof chain for ceiling mounting complete in all respects, plate size 12" X 18" (general size, may increase or decrease depending on site requirements). Make : Pro-lite, Supreent Creation, Auto-Glow, Agni

Supply, Installation, testing and commissioning of Expandable 2 loop Microprocessor based intelligent and modular panel, 100percentage electronically addressable system where field device addressing is done by panel and not by user, LED panel display, single loop with minimum 200 addressable points ( detectors + Devices) per loop, panel with built in battery and battery charger that can support backup up to 24hours idle condition and 30 minutes during alarm condition, 4 sounder circuits, Event history of 9,999 logs, option to load Logo on the main screen, view live analog level of field devices on the panel screen, option to download these events log and analog level report from panel, 3 detector sensitivity levels, option to change the volume and tone of loop powered base sounders from panel, Alarm verification option, T1/T2 timer option, field outputs modules programmable with 3 stage program options, have open path programming software, capacity to communicate loop mount repeater panels, optional NAC power supply units that are loop mountable and 100percentage supervised from main panel. In Metal enclosure including built in Printer and Network Card. The Neworkable FACP shall be able to accommodate below given detectors and devices as per boq and shall have 20percentage spare capacity to accommodate future expansions of addressable points

Supply, Installation, testing and commissioning of Addressable 2 wire photo-thermal detector with built-in short circuit isolator, day/night modes programmable from software, day mode uses the heat aspect of the sensor and night mode uses a combination of heat and smoke detection. 100percentage soft addressing, single LED that covers 360Deg lightpipe technology with intensity, Discreet design for incorporation into any décor, Common mounting base, Drift compensation, Removable detector chamber, Chamber monitoring by panel, option to connect remote indicator.

Supply, Installation, testing and commissioning of Addressable 2 wire break glass manual call point with built in short circuit isolator, 100percentage soft addressed from panel, Wall mounting, resettable key option with back box.

Supply, Installation, testing and commissioning of Addressable loop powered Wall mount sounder, 100percentage soft addressed from panel with 3 tones, Low volume: 87dB at < 2mA and High volume: 100dB at < 6mA, shall be with inbuilt isolator.

Item Description

Supply, Installation, testing and commissioning of Addressable Monitor Module, 100percentage soft addressed from panel, integral short circuit isolators, capable of monitoring NO/NC contacts, Option to choose operation mode as supervision or activation immediate to connect NO/NC contacts such as pressure switch, flow switches, fire pump contacts etc.  The device shall be with inbuilt isolator.

Supply, Installation, testing and commissioning of Addressable Control  Module, 100percentage soft addressed, integral short circuit isolators, Relay contact to drive load up to 1Amps at 30VDC, Changeover relay contacts, module for shutting down AHU’s, and magnetic fire door holders, Elevator recall, fire damper, pressurization fan, speakers, strobes etc. The device shall be with inbuilt isolator.

SITC of Response Indicator for above detectors.

SITC of Supply installation of red colour fire cable confirming to NFPA 70 / 72. 2 core, 1.5 sq mm copper, FRLS, with GI saddle spacers, compatible with GI junction boxes, lugs, cable compression glands, tags and ferulling.

Fire Signage : Fire Hydrant: 4" X 12" Design , supply and installation of safety signages Comprising from Modular Aluminium extrusions (Alloy 6060 as per EuropeanstandardsEN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminiumhomogeneous billet)with premium grade anodizing (Thickness 15-20 microns) as per international standards, with 10 years warranty under normal working conditions. Profile to form frame with overall depth of 10 mm with media of thickness upto 3mm. 2 mm thick PVC Foam Sheet .Media printed on autoglow hign luminous vinyl pasted on PVC,pictograms as per design. I-sign Fix profile of Cosign make withM.Szinc coated corners with grub screws. Installed at site in plumb and level at specified locationas per drawing to the satisfaction of the engineer-in-charge. Providing AUTOGLOW Signages in Block / Small Letters of Specified Sizes:

"ABC" Extinguisher: 8" X 4" : "-: Do -" as per above specification for complete work.

"CO2" Extinguisher: 8" x 4" "-: Do -" as per above specification for complete work.

Fire Equipment : size: 4" X 12" "-: Do -" as per above specification for complete work.

Supply, fixing, testing and commissioning of Automatic Linear pneumatic Tube Detection based Novec 1230/ FK5-1-12 System for Electrical Panels (consisting of the following components: 5 Lb Novec 1230/ FK5-1-12, DLP Assembly with automatic valve mounted on DOT approved cylinder, push in connector for tube, 5lb Novec 1230/ FK5-1-12 gas, mounting bracket, End of Line adopter and low pressure switch for monitoring system activation.

10 Lb Novec 1230/ FK5-1-12, DLP Assembly with automatic valve mounted on DOT approved cylinder, push in connector for tube, 10 lb Novec 1230/ FK5-1-12 gas, mounting bracket, End of Line adopter and low pressure switch for monitoring system activation.

Linear pneumatic heat Detection Tube with all necessary fittings and supports

Supply, fixing, testing and commissioning of 1x80 Itr completely system with CCOE approved high pressure, seamless Cylinders having suitable 80 ltr water capacity and suitable to store Novec 1230 (FK5-1-12) gas at 34.5 bar pressure with valve assembly, low pressure supervisory switch for monitoring cylinder pressure gauge with safety burst disc safety cap, elbow and other accessories, mounting bracket, container straps, NRV. Electrically operated control head capable of being electrically operated from the fire detection and control, Pressure operated control head which shall allow for pressure actuation of gas mounted directly on top of cylinder valve, manually operated actuator to actuate the gas flooding process with the help of a lever, flexible rubber hose with wire bralded enforcement to route the gas from the storage cylinder to the discharge piping, to be connected to the discharge outlet of gas cylinder valve and to be terminated at the system piping or discharge manifold, Flexible actuation hose complete as required. Discharge nozzle, 180/360 degree. Designated to provide proper flow rate and distribution Novec 1230 (FK5-1-12) gas to flood the hazard area as per requirement. Electrical non conductive, Novec 1230 (FK5-1-12) required as per NFPA 2001 latest addition 4.7percentage Design Concentration. Piping ASTM grade A 106 schedule 40 with fittings and supports and Gas Release Panel compatible to Fire Alarm System. Makes : Firetrex / Trace fire/Safe Fire as approved by architect

Providing and erecting approved make AMF control panel suitable for following size of 3 phase, 415 V., 50 cycles, A.C. diesel generating set complete of scope as detailed below: 1) Power module: A pair of electromechanically interlocked contactors (for mains and generator) Overload relay for generator contactor Neutral contactor for mains and generator Power socket for connections. 2) Control and metering module: Line voltage monitor. Generator voltage monitor Ammeter 3 items attempt start facility. Air circuit breakers/MCB/MCCB of suitable rating for auto/manual operation. Auto/manual switch. Emergency stop push buttons. Manual start push button. frequency meter. Engine hour meter. Two earthing studs. 3) Protection module: The engine shutdown in the unlikely event of Low lube oil pressure High cylinder head temperature. V belt failure. 4) Indicators with alarm Load on generator. 5) Indicators Load on mains Engine fails to start . Emergency stop battery charger. The AMF Panel of following capacity (F) AMF Control Panel for 380 KVA/ 400 KVA3 phase DG Set

Immersive Dome: Supplying, installing, commissioning and testing Immersive Dome of Fulldome Pro, Orbit Animate, Ageless Entertainments as per approved make by DTA/Authority. a) 7 m Super Reality dome for indoor installation with projectors equipment truss on top and projection covering walls and floor. Provision for cooling inside dome Single door entry exit Negative pressure screen with blowers to inflate in under 20 mins; ideal for projection quality. b) Media Server with 6 video outputs and fully automatic software for Calibration in less than 30 mins (geometric alignment, color blends, edge blending, black level compensation and gamma matching) Content set of Super Reailty movies Wireless and remote control function including iPad, Camera with Fisheye lens and tripod. c) Laser Projectors 2D 6 x laser (Panasonic/Barco/Christie/Delta/Optoma), (6000+ ANSI Lumens / 1920x1200 resolution / 1200:1 contrast / 20,000 hours laser phosphor / 0.7 - 1.0 TR). d) Digital Sound System 10.2 of JBL or Yamaha or equivalent make. 60W Surround Sound, Control 25 Av. e) Cables (HDMI, Ethernet, Control, Power). f) Services: - Project development, - 1 year warranty inclusive, - Complete set of drawings, specifications, - Manuals, - Installation, - Training for operators. Work complete including all type of material, fittings, fixtures, finish, loading , unloading, safety measures, transportation, shop drawing, all leads, all lift, accessories, sample mockup, all floor, all levels, all heights etc complete as per detailed drawings, specifications and instruction of Authority/Authority. sample mock shall be approved from DTA/Authority. g) Content :Supply and licensing of a full content package containing a minimum of five space science-related movies. The vendor shall provide preview access, final licensed content, and the licence rights for educational display to GCSC.

Angular Momentum Chair: Here is a single seated merry-go-round. Sit and keep the two sliding weights away from the centre with the help of handles provided.The speed of the merry-go-round increases automatically. Type: Interactive. Overall size of display and Exhibit: Overall dimension for single place space: 8' x 8' feet. Material Treatment and Finishes: A revolving chair with protective structure on surrounding made of MS with anti corrosive paint and place for a chair on center. It can revolve on central part. Two weights placed on both sides of the chair and visitor can change location of the weight horizontally to control the speed. General Specification: All material and equipment used to be outdoor compatible and industrial grade.All foundation/civil work required for the exhibit is included in the exhibit cost itself. Foundation, design, loading, etc. t o be provided by CMA to furnish the exhibit complete in all respects.The build should include all components of electronics/electrical work that is required for this experience to be complete.

Periscope: A periscope is defined as an instrument used for observing over, around or through an obstacle or object which is prevented by direct line of sight. It consists of an outer case with mirrors at each end at 45° angle. These mirrors are placed parallel to the surface. Type: Interactive. Overall size of display and Exhibit: Overall dimension: 10' x 10' feet, Material Treatment and Finishes: A periscope to be designed to look over an obstacle of 15 ft hiegh wall . Athe pipe diameter is 150mm with easy and smooth nevigation. Mirror system should be easily accessible for regular cleaning and system should be designed to withstand 5 lakh cycles of operations. General Specification: All material and equipment used to be outdoor compatible and industrial grade.All foundation/civil work required for the exhibit is included in the exhibit cost itself. Foundation, design, loading, etc. t o be provided by CMA to furnish the exhibit complete in all respects.The build should include all components of electronics/electrical work that is required for this experience to be complete.

Gyroscope: Stabilizing motion in space using a flywheel, which has a large amount of inertia. Type: Interactive. Overall size of display and Exhibit: Overall dimension: 8' x 8' feet. Material Treatment and Finishes: The seating arrangement can very smoothly and effortlessly rotte. Thrust bearing, taper roller bearing combination to be used. Th wheel in front of the boy can be rotated at a high speed with hand only. With the help of the handle a visitor can rotate the flywheel system on horizontal axis. Flywheel is of 450mm dia with an agregate weight of almost 1,5 Kg. he system should be designed to withstand 5 lakh cycles of operations. General Specification: All material and equipment used to be outdoor compatible and industrial grade.All foundation/civil work required for the exhibit is included in the exhibit cost itself. Foundation, design, loading, etc. t o be provided by CMA to furnish the exhibit complete in all respects.The build should include all components of electronics/electrical work that is required for this experience to be complete.

Momentum Seesaw: The connection between weight and distance from the pivot of the pendulum. Type: Interactive. Overall size of display and Exhibit: Overall dimension: 12' x 12', Material Treatment and Finishes: A see-saw platform to be designed and developed as shown in the figure . Over all size is 600mm X 3000 mm. The platform will attin maximum heigt of 600mm at its tip. The system should be designed to have a loading of 500 kg at tips and system should be designed to withstand 5 lakh cycles of operations. General Specification: All material and equipment used to be outdoor compatible and industrial grade.All foundation/civil work required for the exhibit is included in the exhibit cost itself. Foundation, design, loading, etc. t o be provided by CMA to furnish the exhibit complete in all respects.The build should include all components of electronics/electrical work that is required for this experience to be complete.

Whispering Dishes: A whisper that can be heard at a distance. Two “satellite dishes” are spaced far apart from one another. In the focal point of the “dish” is a point where speech can be clearly heard. Type: Interactive. Overall size of display and Exhibit: Overall dimension for single place space: 8' x 8' feet, Material Treatment and Finishes: Two FRP parabolic reflectors of diameter 1500 mm of high surface finish and minimum aberation are fixed 30 mtr apart as shown in the figare. Focuses are located with proper frame work. If two visitors whisper at the focuses one can hear the other. General Specification: All material and equipment used to be outdoor compatible and industrial grade.All foundation/civil work required for the exhibit is included in the exhibit cost itself. Foundation, design, loading, etc. t o be provided by CMA to furnish the exhibit complete in all respects.The build should include all components of electronics/electrical work that is required for this experience to be complete.

Space Gallery Map: What the exhibit says about: Map of the Gallery. Mode of communication: Model of Hall of space with Graphic Panel. Exhibit Type: Static.

Exhibits: The Concept of space through ages.: What the exhibit says about: It talks about how the mankind envisaged the space through ages as the civilization progressed and where our understanding about space stands now in the light of modern science. Mythological and spiritual concepts also needs to be added. Model of Hall of space with Graphic Panel: A graphic panel with write-up. Exhibit Type: Static. Data point/ Internet point/ Electrical point: Electrical. Overall size of display and Exhibit: Overall size: 6' x 2' feet, Graphic Panel Size: 4' L x 8' H feet. Info display/Signage: Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 1200mm x 2400mm mounted on gallery interior walls fixed with the necessary wooden / ply boxing with hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ). Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden/ ply boxing with hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray. Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired). Material Treatment and Finishes: Standy : Pedestal/base structure In Acrylic with floor levellers and removable frame with mirror screws. The pedestal/exhibit to be grouted to the floor wherever necessary basis the load and stability of the exhibit and related interactions. Complete in all respects. Refer to typical details drawings of screen mounting and pedestals.

Exhibits: A void space- not so void.: What the exhibit says about: It talks about, galaxies, stellar cloud, and host of other thing which explains that space is full of matter and energy like planets, stars, satellites, comets, black holes and any other celestial entity. Mode of communication: Multimedia explaining what is Void Space and tells if space is a void place or not. Exhibit Type: Multimedia. Multimedia hardware requirements and Desired size: LED Display Panel Screen size: 65". Audio: Voice over, Minimum 2 languages and subtitles. Data and Electrical point. Overall size of display and Exhibit: Overall size: 9' x 2' feet, Graphic Panel Size: 4' L x 8' H feet. Multimedia Content /Software: A short film (30 Sec) about "A Void Space Not So Void in Space," the concept of cosmic voids—vast, empty-seeming regions between galaxies—is explored. The film would show that while these areas may appear empty, they are far from devoid of activity. It would highlight that even in the emptiest parts of space, there are quantum fluctuations, cosmic microwave background radiation, and dark matter filling the void. The film would explain how dark matter influences galaxies, dark energy drives the expansion of the universe, and gravitational waves ripple through space. By using animations and visuals, the film would illustrate that space, even in its most "empty" regions, is teeming with subtle forces, energy, and invisible phenomena, making the void not truly void at all. ELV: 65" Display Technology IPS/ VA , 3840x2160 (HD) , Brightness 350/500Nits abd Above , Contrast Ration : 4000:1 , 3 HDMI , 1 RJ45, RS232, 2-USB ,Antiglare Display , Builtin Wifi , Built in Browser , Smart- Screen Mirrioing , Play Via URL , Auto Wakeup , USB Play Video / Audio, Security- USB, Wifi, and Remote Lock , Speaker 20W (10Wx2) , Power Cable OS- TIzen / Web OS, RDP mode(Remote Desktop Protocol. Info display/Signage: Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 1200mm x 2400mm mounted on gallery interior walls fixed with the necessary wooden/ ply boxing with hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ). Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden/ ply boxing with hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray. Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired). Material Treatment and Finishes: Standy : Pedestal/base structure In Acrylic with floor levellers and removable frame with mirror screws. The pedestal/exhibit to be grouted to the floor wherever necessary basis the load and stability of the exhibit and related interactions. Complete in all respects. Refer to typical details drawings of screen mounting and pedestals.

Exhibits: Einstin's General Relativity.: What the exhibit says about: Double gravity well and fly by method. Mode of communication: Double gravity well and working model. Exhibit Type: Interactive. Electrical point Overall size of display and Exhibit: Overall size: 5' x 7', Model Size: 5' L x 3' H, Graphic Panel Size: 4' x 8', Info display/Signage: Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 1200mm x 2400mm mounted on gallery interior walls fixed with the necessary wooden/ ply boxing with hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ). Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden/ ply boxing with hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray. Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired). Material Treatment and Finishes: Base (1.7 sqmt): Required shape and size stage with fabrication work for levelling of stage ht up to150-300 mm as per exhibit requirment finished with structure ply and Vinyl / Laminate flooring material finish. Facia finish with wooden beading matching with paint including concealed LED lighting etc complete. (Refer BOQ Item No. 7.11 ) (Shape and size will be differ as per exhibit requirement during executions.) Free standing replica of space suite embedded in free standing table wherever necessary basis the load and stability of the exhibit and related interactions. Fabricated Spacetime Well: A stretched elastic fabric membrane mounted on a circular frame to simulate spacetime curvature. Visitors can place weighted objects (metal or resin spheres) to observe how spacetime "warps" based on mass. Elastic Fabric: Stretchable lycra or similar material for the spacetime simulation. Weights: Non-toxic resin or stainless steel balls of varying sizes. Digital Elements: Touchscreen panel with pre-programmed interactive software. Rounded Edges: Smooth edges to prevent injury. Stable Base: Anti-slip pads to ensure the exhibit does not shift during interaction.

Exhibits: What is the Earth's atmosphere?: What the exhibit says about: It talks about the constituents of Earth Atmosphere, Pressure, How it formed and how it changed through ages. Mode of communication : A graphic panel supported with Multimedia display. Exhibit Type: Multimedia. Multimedia hardware requirements and Desired size: Touch Screen on wall : 55", Data+ Electrical, Overall size of display and Exhibit: Overall size: 6' x 2', Graphic Panel Size: 2' L x 4' H, Multimedia Content /Software: Application to be developed for the required interaction including UI, application development and programming. It should include What is the Earth's Atmosphere? takes viewers on a visually captivating journey to explore the layers and functions of Earth's atmosphere. It explains how this vital, protective layer of gases—composed mainly of nitrogen, oxygen, and trace amounts of other gases—supports life on our planet. Through stunning visuals and expert insights, the film delves into the atmosphere's role in regulating temperature, protecting us from harmful solar radiation, and enabling weather patterns. It also examines the growing concerns around climate change and human impact on the delicate balance of our atmosphere. Should be in minimum 2 languages. Application should have FHD images/ videos. To be approved by Authority and DTA. ELV: 400 NIts UHD(3840x2160) Integrated Capacitive Touch, 2xHDMI,DVI, DP,USBx2, LAN, 8 GB Internal Memory, Magic Infolite Software, Speakers, Wifi , Built in Browser , Smart- Screen Mirrioing , Play Via URL , Auto Wakeup , USB Play Video / Audio, Security- USB, Wifi, and Remote Lock , Speaker 20W (10Wx2) , Power Cable OS- TIzen / Web OS, RDP mode(Remote Desktop Protocol. Info display/Signage: Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 1200mm x 2400mm mounted on gallery interior walls fixed with the necessary wooden/ ply boxing with hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ). Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden/ ply boxing with hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray. Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired). Material Treatment and Finishes: Standy : Pedestal/base structure In Acrylic with floor levellers and removable frame with mirror screws. The pedestal/exhibit to be grouted to the floor wherever necessary basis the load and stability of the exhibit and related interactions. Complete in all respects. Refer to typical details drawings of screen mounting and pedestals.

Exhibits: What is End of Atmosphere to the actual realm of Space?: What the exhibit says about: How is the border line of Atmosphere and Space, its specifications, Describing the transition from atmospheric layers to the actual realm of Space. Also providing information about atmosphere and escape velocity. Mode of communication: Group of Visitors standing inside the existing dome (replacement of Miya Phuski Show), Vertical multiple screens are installed wherein a space craft is moving through the atmosphere displayed. And as it is gaining height, the layers are changing and an audio commentary describing the layer components. Few walls inside the dome can be backlit vinyle display of atmospheric layers. Exhibit Type: Interactive. Multimedia hardware requirements and Desired size: 6no. 65" LED Screens placed vertically, Voiceover, Minimum 2 languages and subtitles, Data+ Electrical point. Overall size of display and Exhibit: Overall size: 26' dia, Graphic Panel Size: 2' L x 8' H_4 Nos., Multimedia Content /Software: A 5 min film would begin by describing the boundary where Earth's atmosphere ends and space begins, known as the Kármán line, located about 100 kilometers (62 miles) above sea level. It would highlight how, as you ascend, the atmosphere becomes thinner and thinner, eventually giving way to the vacuum of space. The film would contrast the protective role of the atmosphere—providing oxygen, shielding us from radiation, and maintaining climate—with the hostile environment of space, which lacks air, pressure, and life-sustaining conditions. It would emphasize that while the atmosphere is crucial for life, the vast emptiness of space beyond is where the true challenges of space exploration begin, with extreme temperatures, radiation, and the absence of breathable air. The film would conclude by showing how our atmosphere serves as a protective barrier that makes life on Earth possible, and space, though vast and infinite, is a harsh, inhospitable realm., ELV: 65" Display Technology IPS/ VA , 3840x2160 (HD) , Brightness 350/500Nits abd Above , Contrast Ration : 4000:1 , 3 HDMI , 1 RJ45, RS232, 2-USB ,Antiglare Display , Builtin Wifi , Built in Browser , Smart- Screen Mirrioing , Play Via URL , Auto Wakeup , USB Play Video / Audio, Security- USB, Wifi, and Remote Lock , Speaker 20W (10Wx2) , Power Cable OS- TIzen / Web OS, RDP mode(Remote Desktop Protocol. , Info display/Signage: Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 2400mm mounted on gallery interior walls fixed with the necessary wooden/ ply boxing with hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ). Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden/ ply boxing with hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray. Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes: Panel : Base structure made up of MR grade ply wood with necessary wooden/GI framing finished with 1 mm thk laminate with edge finish of matching PVC edge with required size and provision of profile light on the edges.as required inside .Screen embedded into FRP panelling with required finishing .fixing ventilation and sound system arrangement with required accessories and fitting Screens and Visuals Vertical Screens:Six LED panels (4K resolution) with anti-glare coating, mounted vertically inside the dome.Edge-lit or direct-lit backlight technology for vibrant, high-contrast visuals. Backlit Vinyl Walls:Printed graphics of atmospheric layers on acrylic or vinyl sheets with integrated LED backlighting. Audio and Commentary: Surround Sound System: Integrated 5.1 or 7.1 surround sound with directional speakers placed strategically around the dome. Pre-synchronized audio commentary in multiple languages. Interactive Features Floor Simulation:Hydraulic motion control system for synchronized floor vibrations mimicking spacecraft ascent. Lighting Effects: Programmable dynamic LED lighting simulating atmosphere transitions like auroras or thermal layers. Power and Control Systems Centralized Control Panel:Hardware to manage visuals, sound, and floor vibrations seamlessly.,

Exhibits: What is Lack of Atmospheric Diffusion. : What the exhibit says about: Generally space is devoid of any particle. So light is everywhere, it is not diffused at all. The challenges it poses due to no diffusion. One side of an object getting hot and the other side frozen. Mode of communication: Graphic panel, Multimedia and an working explanatory exhibit., Exhibit Type: Multimedia, Multimedia hardware requirements and Desired size: 55" LED Display Panel, Voiceover, Minimum 2 languages and subtitles, Data+ Electrical, Overall size of display and Exhibit: Overall size: 4' x 4', Graphic Panel Size: 2' L x 4' H, Multimedia Content /Software: A 30 sec film would begin by describing atmospheric diffusion as the process by which gases, heat, and particles naturally spread and mix within the atmosphere. This process is essential for maintaining a balanced climate and for distributing oxygen, moisture, and other elements around the planet. The film would then explain that lack of atmospheric diffusion occurs when the atmosphere becomes stagnant or unable to properly mix, often due to factors like temperature inversions or air pressure changes. This can lead to issues such as pollution buildup, local climate imbalances, or extreme weather conditions, which can negatively impact ecosystems and human health. Finally, the film would highlight that without proper diffusion, gases like carbon dioxide can accumulate, exacerbating the greenhouse effect and contributing to global warming. The film would conclude by stressing the importance of maintaining healthy atmospheric processes for the stability of life on Earth., ELV: 55" Display Technology IPS/ VA , 3840x2160 (HD) , Brightness 350/500Nits abd Above , Contrast Ration : 4000:1 , 3 HDMI , 1 RJ45, RS232, 2-USB ,Antiglare Display , Builtin Wifi , Built in Browser , Smart- Screen Mirrioing , Play Via URL , Auto Wakeup , USB Play Video / Audio, Security- USB, Wifi, and Remote Lock , Speaker 20W (10Wx2) , Power Cable OS- TIzen / Web OS, RDP mode(Remote Desktop Protocol. , Info display/Signage: Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden/ ply boxing with hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ). Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden/ ply boxing with hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray. Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes: Standy : Pedestal/base structure In Acrylic with floor levellers and removable frame with mirror screws. The pedestal/exhibit to be grouted to the floor wherever necessary basis the load and stability of the exhibit and related interactions. Complete in all respects. Refer to typical details drawings of screen mounting and pedestals.

Exhibits: I shall be a balloon and explode: What the exhibit says about: In absence of atmospheric protection, if we are exposed to space bare body, we shall simply explode and vanish., Mode of communication: Experimenting on ballooning effect with reduced pressure-an working exhibit and Graphic panel., Exhibit Type: Interactive, Data+ Electrical, Overall size of display and Exhibit: Overall size: 4' x 4', Graphic Panel Size: 2' L x 4' H, Info display: Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden/ ply boxing with hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ). Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden/ ply boxing with hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray. Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes: Table - 2 : [600-750 L x 750-900 W x 750 H (Glass case H_300)] Table as per required size and shape 8mm MR plywood with necessary wooden/MS framing finished with 1.2mm laminate and 6mm thk corian cladding facia required sizes with floor levellers. The pedestal/exhibit to be grouted to the floor wherever necessary basis the load and stability of the exhibit and related interaction.Table top with toughened glass/clear acrylic case as per required size for visibility of exhibit.Opening and air ventilation system arrangement where ever required. (Shape and size will be differ as per exhibit requirement during executions.) Enclosure: Transparent acrylic chamber (5mm thick) for visibility during the demonstration. Pressure Mechanism: Vacuum Pump: High-efficiency electric vacuum pump for reducing internal pressure. Control Panel: Includes pressure gauge and an adjustable valve system to regulate vacuum levels. Interactive Components: Balloon Setup: Pre-installed latex balloons positioned on a central nozzle inside the chamber. Easy-to-replace balloon holders for repeated use. User Interface: Button Activation: Single push-button control for starting the vacuum pump. Safety Glass: View panel made of shatterproof acrylic to ensure safety. Digital Readout: Displays real-time pressure levels inside the chamber. Safety Features: Emergency Stop: Easily accessible stop button to immediately halt the vacuum pump. Pressure Limiter: Prevents over-reduction of pressure to protect the equipment and participants.,

Exhibits: The hostile environments of other planets? : What the exhibit says about: A comparative study of Temperature, pressure, Atmosphere and its constituents, Mode of communication: Graphic Panel , Exhibit Type: Static, Overall size of display and Exhibit: Overall size: 8' x 2', 4no. Graphic Panel Size:4'' L x 8' H each, Info display : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 1200mm x 2400mm mounted on gallery interior walls fixed with the necessary wooden/ ply boxing with hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ). Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden/ ply boxing with hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray. Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired).,

Exhibits: Astronaut tools and equipment for interplanetary travel?: What the exhibit says about: An Astronaut needs a set of tools and tackles while stepping on the soil of a different Planet, Mode of communication: Replica of actual tools and its display with explanation of there usages + Multimedia., Exhibit Type: Multimedia, Multimedia hardware requirements and Desired size: LED Display :55" screen, Data+ Electrical point, Overall size of display and Exhibit: Overall size: 4' x 2', Graphic Panel Size: 2' L x 4' H, Multimedia Content /Software: A 30 secfilm would begin by showcasing the spacesuit, which is crucial for protection in the harsh environment of space. It would highlight its features: life support systems (for oxygen, temperature regulation, and waste management), radiation shielding, and mobility to ensure astronauts can safely work in space.Next, the film would cover other essential tools like space habitats (for long-term living), advanced communication systems (to stay in contact with mission control), and propulsion systems (like ion engines or nuclear-powered thrusters) that would allow spacecraft to travel between planets. The film would also feature scientific instruments, such as rovers for planetary exploration, drills for sample collection, and drones for surveying terrain. Additionally, it would briefly touch on power sources like solar panels and nuclear reactors needed for energy in deep space. The film would conclude by emphasizing the importance of these tools and equipment in ensuring astronaut survival, exploration, and scientific discovery on long-term interplanetary missions., ELV: 55" Display Technology IPS/ VA , 3840x2160 (HD) , Brightness 350/500Nits abd Above , Contrast Ration : 4000:1 , 3 HDMI , 1 RJ45, RS232, 2-USB ,Antiglare Display , Builtin Wifi , Built in Browser , Smart- Screen Mirrioing , Play Via URL , Auto Wakeup , USB Play Video / Audio, Security- USB, Wifi, and Remote Lock , Speaker 20W (10Wx2) , Power Cable OS- TIzen / Web OS, RDP mode(Remote Desktop Protocol. , Info display/Signage: Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary ply / wooden framing, hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ). Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden/ ply boxing with hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray. Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes: Display Cupboard 10'-12' L x 1'- 1'6"D : Display as per required size made up 12mm MR plywood with necessary wooden/MS framing finished with 1.2mm laminate. The pedestal/exhibit to be grouted to the floor wherever necessary basis the load and stability of the exhibit and related interactions .Glass/acylic case as per exhibit requirment. Bottom considering required all accessories and opening system arrangement where ever required. (Shape and size will be differ as per exhibit requirement during executions.) Objects : Replica of tools used in space.

Exhibits: Delving into Our Solar System: What the exhibit says about: A model of solar system with proportionate size and distance, Mode of communication: The Sun and all planets hung from the roof with propotionate diameter and distance utiling great height of 25 feet., Exhibit Type: Interactive, Overall size of display and Exhibit: Overall size: 13' x 13', Material Treatment and Finishes: Object : Model of all planets made of FRP with illumination, proportionate sized as per the description. Hanged from ceiling. Mechanism to be worked out that planets revolves around the sun at proportionate speed. Standy : Pedestal/base structure In Acrylic with floor levellers and removable frame with mirror screws. The pedestal/exhibit to be grouted to the floor wherever necessary basis the load and stability of the exhibit and related interactions. Complete in all respects. Refer to typical details drawings of screen mounting and pedestals.

Exhibits: What is planetary positioning system? : What the exhibit says about: Shows position of the planets on a specific date and time. Input shall be given by a visitor., Mode of communication: Enter a specific date on the touch screen and it'll show the exact position of the planets on that date and time., Exhibit Type: Interactive, Multimedia hardware requirements and Desired size: Touch Screen on wall : 55", Data+ Electrical point, Overall size of display and Exhibit: Overall size: 5' x 3', Multimedia Content/Software: Application to be developed for the required interaction including UI, application development and programming. Should be in minimum 2 languages. Application should have FHD images/ videos. To be approved by Authority and DTA. ELV: 400 NIts UHD(3840x2160) Integrated Capacitive Touch, 2xHDMI,DVI, DP,USBx2, LAN, 8 GB Internal Memory, Magic Infolite Software, Speakers, Wifi , Built in Browser , Smart- Screen Mirrioing , Play Via URL , Auto Wakeup , USB Play Video / Audio, Security- USB, Wifi, and Remote Lock , Speaker 20W (10Wx2) , Power Cable OS- TIzen / Web OS, RDP mode(Remote Desktop Protocol. , Material Treatment and Finishes: Standy : Pedestal/base structure In Acrylic with floor levellers and removable frame with mirror screws. The pedestal/exhibit to be grouted to the floor wherever necessary basis the load and stability of the exhibit and related interactions. Complete in all respects. Refer to typical details drawings of screen mounting and pedestals.,

Space Suit: What protects you in space?, What the exhibit says about: It maintains pressure at 3 psi, supply and scrub oxygen, maintains humidity, and protects from UV radiation., Mode of communication: Display of a replica space suit with full detail and explanation of its different parts. Exhibit Type: Static, Overall size of display and Exhibit: Overall size: 6' x 5', Replica Size: Life Size, Graphic Panel Size: 2' L x 4' H, Info display/Signage: Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden/ ply boxing with hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ). Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden/ ply boxing with hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray. Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes: Base (1.7 sqmt): Required shape and size stage with fabrication work for levelling of stage ht up to150-300 mm as per exhibit requirment finished with structure ply and Vinyl / Laminate flooring material finish. Facia finish with wooden beading matching with paint including concealed LED lighting etc complete. (Refer BOQ Item No. 7.11 ) (Shape and size will be differ as per exhibit requirement during executions.) Object : Cut section of real space suit showing all the materials which is used to maintain the comfortable environment for astronaut in space. Space suit replica of Rakesh Sharma.,

Name of the Exhibits : Are space suits entirely safe?: What the exhibit says about : Stories of some historical failure of space suits , Mode of communication : Graphic panels and Multimedia and videos., Exhibit Type : Multimedia, Multimedia hardware requirements and Desired size : LED Display: 55 inch displat embedded in wall panel, Audio : Voiceover, Minimum 2 languages and subtitles, Data point/ Internet point/ Electrical point : Data+ Electrical, Overall size of display and Exhibit : Overall size: 4' x 2', Graphic Panel Size: 2' L x 4' H, Multimedia Content/ Software : A 30 Sec film would discuss the challenges and risks that space suits still face. While suits are highly reliable, they are not perfectly safe. Issues such as suit malfunctions, pressure loss, or communication failures can pose serious risks during spacewalks or missions. The film would also address the difficulty of mobility in the suits, which can limit astronauts' ability to perform tasks and increase fatigue.the film would conclude by acknowledging that while space suits are highly advanced and continually improving, space exploration inherently involves risks, and safety remains a top priority for future missions., ELV : 55" Display Technology IPS/ VA , 3840x2160 (HD) , Brightness 350/500Nits abd Above , Contrast Ration : 4000:1 , 3 HDMI , 1 RJ45, RS232, 2-USB ,Antiglare Display , Builtin Wifi , Built in Browser , Smart- Screen Mirrioing , Play Via URL , Auto Wakeup , USB Play Video / Audio, Security- USB, Wifi, and Remote Lock , Speaker 20W (10Wx2) , Power Cable OS- TIzen / Web OS, RDP mode(Remote Desktop Protocol. , Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden/ ply boxing with hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ). Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden/ ply boxing with hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray. Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : N/A,

Name of the Exhibits : Helmets for Astronauts in Space: What the exhibit says about : In most situations in space, there is an enormous contrast between sunlight and shadow. The helmet visors protect astro­naut from the Sun's direct rays., Mode of communication : Working exhibit of a visor, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/ Internet point/ Electrical point : Electrical, Overall size of display and Exhibit : Overall size: 4' x 2' Instrument size: Life Size Graphic Panel Size: 2' L x 4' H, Multimedia Content/ Software : N/A, ELV : N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden/ ply boxing with hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ). Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden/ ply boxing with hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray. Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Table - 1 (750-900 L x 750-900 W x 600-750 H) : Table as per required size made up 8mm MR plywood with necessary wooden/MS framing finished with 1.2mm laminate and 6mm thk corian cladding facia required sizeswith floor levellers. The pedestal/exhibit to be grouted to the floor wherever necessary basis the load and stability of the exhibit and related interactions (Shape and size will be differ as per exhibit requirement during executions.) Exhibit: Materials: Spacesuit helmet placed on table.,

Name of the Exhibits : Can we get lost in space?: What the exhibit says about : Most tasks in space necessitates attaching the astronaut securely with the surface of the space craft., Mode of communication : Models and display of different methods of securing with the space craft., Exhibit Type : Static, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/ Internet point/ Electrical point : Electrical, Overall size of display and Exhibit : Overall size: 6' x 6' Replica Size: 6' high each/ Life size for smaller instruments Graphic Panel Size: 2' L x 4' H, Multimedia Content/ Software : N/A, ELV : N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden/ ply boxing with hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ). Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden/ ply boxing with hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray. Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Base (2.95 sqmt): Required shape and size stage with fabrication work for levelling of stage ht up to150-300 mm as per exhibit requirment finished with structure ply and Vinyl / Laminate flooring material finish. Facia finish with wooden beading matching with paint including concealed LED lighting etc complete .(Refer BOQ Item No. 7.11 ) (Shape and size will be differ as per exhibit requirement during executions.) Exhibit: Models as described are placed on table.,

Name of the Exhibits : What is tumbling? : What the exhibit says about : Space walk is never undertaken without thorough training. Tumbling is one of the major hazards in space walk., Mode of communication : Backlit Graphic Panel, Exhibit Type : Static, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/ Internet point/ Electrical point : Electrical, Overall size of display and Exhibit : Overall size: 4' x 2' Graphic Panel Size: 4' L x 8' H, Multimedia Content/ Software : N/A, ELV : N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 1200mm x 2400mm mounted on gallery interior walls fixed with the necessary wooden/ ply boxing with hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ). Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden/ ply boxing with hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray. Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Base (2.95 sqmt): Required shape and size stage with fabrication work for levelling of stage ht up to150-300 mm as per exhibit requirment finished with structure ply and Vinyl / Laminate flooring material finish. Facia finish with wooden beading matching with paint including concealed LED lighting etc complete .(Refer BOQ Item No. 7.11 ) (Shape and size will be differ as per exhibit requirement during executions.),

Name of the Exhibits : Types of tools are utilized in space?: What the exhibit says about : Description of some of the tools used in space, Mode of communication : Models and Photographs, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/ Internet point/ Electrical point : N/A, Overall size of display and Exhibit : Overall size: 4' x 2' Model Size: Life size, Multimedia Content/ Software : N/A, ELV : N/A, Info display/Signage : N/A, Material Treatment and Finishes : Table - 2 (750-900 L x 750-900 W x 750 H): Table as per required size and shape 8mm MR plywood with necessary wooden/MS framing finished with 1.2mm laminate and 6mm thk corian cladding facia required sizeswith floor levellers. The pedestal/exhibit to be grouted to the floor wherever necessary basis the load and stability of the exhibit and related interaction.Table top with toughened glass/clear acrylic case as per required size for visibility of exhibit.Opening and air ventilation system arrangement where ever required. (Shape and size will be differ as per exhibit requirement during executions.) Exhibit Materials: Tools in space as per the description to be placed on a table,

Name of the Exhibits : How can we walk in space? : What the exhibit says about : Description and its necessity, Mode of communication : Films, Exhibit Type : Multimedia, Multimedia hardware requirements and Desired size : 65" LED LED Display Panel, Audio : Voiceover Minimum 2 languages and subtitles, Data point/ Internet point/ Electrical point : Data+ Electrical, Overall size of display and Exhibit : Overall size: 4' x 2', Multimedia Content/ Software : In a 30 sec short film about "How Can We Walk in Space?", the focus would be on explaining how astronauts can move and work in the weightless environment of space, particularly during spacewalks (Extravehicular Activity, or EVA). The film would begin by introducing the concept of microgravity, where the lack of gravity in space means astronauts don't "fall" like on Earth. This makes traditional walking impossible, but astronauts can float and use their bodies to move. Next, the film would explain how astronauts use special space suits, like the Extravehicular Mobility Unit (EMU), to protect them from the harsh conditions of space. These suits provide oxygen, regulate temperature, and shield against space debris. The film would show how astronauts use handrails, foot restraints, and jetpacks (like the Manned Maneuvering Unit) to propel themselves and stay anchored during spacewalks. Finally, the film would conclude by emphasizing that while astronauts can’t “walk” in space the way we do on Earth, their equipment and techniques allow them to navigate and work efficiently in the weightless environment of space., ELV : 65" Display Technology IPS/ VA , 3840x2160 (HD) , Brightness 350/500Nits abd Above , Contrast Ration : 4000:1 , 3 HDMI , 1 RJ45, RS232, 2-USB ,Antiglare Display , Builtin Wifi , Built in Browser , Smart- Screen Mirrioing , Play Via URL , Auto Wakeup , USB Play Video / Audio, Security- USB, Wifi, and Remote Lock , Speaker 20W (10Wx2) , Power Cable OS- TIzen / Web OS, RDP mode(Remote Desktop Protocol. , Info display/Signage : N/A, Material Treatment and Finishes : LED Screen embedded in a wall panel, Name of the Exhibits : What is The Manned Maneuverability Unit?: What the exhibit says about : Description of some of the models used in different mission., Mode of communication : , Exhibit Type : , Multimedia hardware requirements and Desired size : , Audio : , Data point/ Internet point/ Electrical point : , Overall size of display and Exhibit : Overall size: 4' x 2', Multimedia Content/ Software : , ELV : , Info display/Signage : , Material Treatment and Finishes : ,

Training Simulator: Name of the Exhibits : The Neutral Buoyancy Simulator: Zero G, How astronauts are being trained?, Six Degree of Freedom: Reduced Gravity, An astronaut in space suit with neutral buoyancy moves inside a huge water tank, Zero G experience is created in an aircraft moving at high altitude in a parabolic trajectory., A simulator which creates low gravity condition, Film and animation with Panel support, : What the exhibit says about : , Mode of communication : , Exhibit Type : Multimedia, Multimedia hardware requirements and Desired size : LED Display: 65" LED LED Display Panel, Audio : Voiceover Minimum 2 languages and subtitles, Data point/ Internet point/ Electrical point : Data+ Electrical, Overall size of display and Exhibit : Overall size: 4' x 4' Graphic Panel Size: 2' L x 4' H, Multimedia Content/ Software : This 120 sec film takes viewers inside the Neutral Buoyancy Simulator (NBS), a giant pool used to train astronauts for spacewalks. The NBS mimics the conditions of zero gravity by allowing astronauts to float and move as they would in space. Wearing full space suits, they practice complex tasks like repairs, tool handling, and navigating spacecraft, all while immersed in water. The film demonstrates how the buoyancy of the water simulates the weightlessness astronauts will experience in space, providing them with hands-on experience before their actual missions.This film explores the rigorous and innovative training methods astronauts undergo to prepare for space missions. It highlights various training environments, including simulators, virtual reality, and neutral buoyancy pools where astronauts practice spacewalks. The film also covers physical conditioning, survival training, and learning to operate spacecraft systems. Through these techniques, astronauts are trained not only to handle the technical aspects of their missions but also to manage the physical and psychological challenges of living and working in space.This film explains the concept of Six Degrees of Freedom (6DoF), which refers to the ability of an object (or astronaut) to move in space along three axes of translation (up/down, left/right, forward/backward) and three axes of rotation (pitch, yaw, and roll). The film showcases how astronauts train in reduced gravity environments like parabolic flights (the "vomit comet") and special simulators to learn to control their movements in the weightless conditions of space. By mastering 6DoF, astronauts can navigate spacecraft, perform repairs, and maneuver in zero-gravity with precision and confidence., ELV : 65" Display Technology IPS/ VA , 3840x2160 (HD) , Brightness 350/500Nits abd Above , Contrast Ration : 4000:1 , 3 HDMI , 1 RJ45, RS232, 2-USB ,Antiglare Display , Builtin Wifi , Built in Browser , Smart- Screen Mirrioing , Play Via URL , Auto Wakeup , USB Play Video / Audio, Security- USB, Wifi, and Remote Lock , Speaker 20W (10Wx2) , Power Cable OS- TIzen / Web OS, RDP mode(Remote Desktop Protocol. , Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden/ ply boxing with hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ). Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden/ ply boxing with hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray. Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Counter (450-600 L x 1200-1500 W x 300-450 H)-: As per required shape and size counter made from 8mm MR plywood with necessary wooden/MS framing finished with 6mm thk corian finished on top and facia bottom 1.2 mm th laminate .Counter support to be grouted to the floor wherever necessary basis the load and stability of the exhibit and related interaction. (Shape and size will be differ as per exhibit requirement during executions.),

Training Simulator: Name of the Exhibits : Centrifuges and G-Force Simulators: What the exhibit says about : A simulator which creates multiple G force condition to train the astronaut to such condition which exist while the Space Ship is accelerating with escape velocity., Mode of communication : A simulator which creates multiple G force condition to train the astronaut, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/ Internet point/ Electrical point : N/A, Overall size of display and Exhibit : Overall size: 6' x 6', Multimedia Content/ Software : N/A, ELV : N/A, Info display/Signage : N/A, Material Treatment and Finishes : Structural Frame Base Frame: Sturdy, powder-coated steel base to support rotating structure. Rotating Arm: High-tensile steel arm with balanced load distribution for safe rotation. Capsule Seats: Two ergonomically designed fiber-reinforced plastic (FRP) seats with seatbelts for safety. Capsule Body: Acrylic and aluminum casing, offering visibility and a lightweight design. Mechanism Manual Rotation: Central rotary wheel within the capsule, operable by users to initiate and control the rotation. Bearings and Axis: Heavy-duty ball bearings for smooth and controlled rotation around a central axis. Safety Features Seat Restraints: Adjustable harness seatbelts to secure participants. Speed Limiter: Mechanical or electronic rotation limiter to maintain safe speeds. Informational Display: Digital or printed panel outside the exhibit explaining centrifugal force and its applications.Interactive examples of real-world scenarios, such as space training and amusement rides..Standy : Pedestal/base structure In Acrylic with floor levellers and removable frame with mirror screws. The pedestal/exhibit to be grouted to the floor wherever necessary basis the load and stability of the exhibit and related interactions. Complete in all respects. Refer to typical details drawings of screen mounting and pedestals. ,

Name of the Exhibits : Human body in absence of atmosphere?: What the exhibit says about : The most immediate human need in space is an atmosphere of acceptable composit1on and pressure, Mode of communication : Graphic Panel, Exhibit Type : Static, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/ Internet point/ Electrical point : N/A, Overall size of display and Exhibit : Overall size: 4' x 2' Graphic Panel Size: 4' L x 8' H, Multimedia Content/ Software : N/A, ELV : N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 1200mm x 2400mm mounted on gallery interior walls fixed with the necessary wooden/ ply boxing with hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ). Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden/ ply boxing with hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray. Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Graphic panels fixed on a wall panel,

Name of the Exhibits : Human body in absence of gravity ?: What the exhibit says about : The full importance of gravity can best be appreciated by looking at some bizarre effects that zero gravity causes: Calcium production for bones stops leading to bone weight loss and susceptibility to bone fracture. Electrolyte imbalances occur. Steroid and other hormonal secretions are suppressed., Mode of communication : A touch sensitive display with an human body with hotspot on body parts showing effect on that part by prolonged zero gravity exposure with supporting Graphic panel., Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : LED Display : 55" interactive touch screen, Audio : N/A, Data point/ Internet point/ Electrical point : Data+ Electrical, Overall size of display and Exhibit : Overall size: 4' x 2', Multimedia Content/ Software : Application to be developed for the required interaction including UI, application development and programming. Should be in minimum 2 languages. Application should have FHD images/ videos. To be approved by Authority and DTA., ELV : 400 NIts UHD(3840x2160) Integrated Capacitive Touch, 2xHDMI,DVI, DP,USBx2, LAN, 8 GB Internal Memory, Magic Infolite Software, Speakers, Wifi , Built in Browser , Smart- Screen Mirrioing , Play Via URL , Auto Wakeup , USB Play Video / Audio, Security- USB, Wifi, and Remote Lock , Speaker 20W (10Wx2) , Power Cable OS- TIzen / Web OS, RDP mode(Remote Desktop Protocol. , Info display/Signage : N/A, Material Treatment and Finishes : Interactive touch screen embedded in wall panel,

Name of the Exhibits : Post-Earth Return: Prevention and Treatment: What the exhibit says about : What are the preventive measures and cure of the disease after returning from the space?, Mode of communication : A backlit informative panel showing preventive measures and cure of the diseases, Exhibit Type : Static, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/ Internet point/ Electrical point : N/A, Overall size of display and Exhibit : Overall size: 4' x 2' Graphic Panel Size: 4' L x 8' H, Multimedia Content/ Software : N/A, ELV : N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 1200mm x 2400mm mounted on gallery interior walls fixed with the necessary wooden/ ply boxing with hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ). Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden/ ply boxing with hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray. Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Graphic panels fixed on a wall panel,

Medical: Psychology : possible disorders: Name of the Exhibits : What followed after returning from space?: What the exhibit says about : Weightlessness has a disturbing effect on the vestibular part of the inner ear and this upsets the equilibrium., Mode of communication : Graphic Panel display, Exhibit Type : Static, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/ Internet point/ Electrical point : N/A, Overall size of display and Exhibit : Overall size: 4' x 2' Graphic Panel Size: 4' L x 8' H, Multimedia Content/ Software : N/A, ELV : N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 1200mm x 2400mm mounted on gallery interior walls fixed with the necessary wooden/ ply boxing with hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ). Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden/ ply boxing with hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray. Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : N/A,

Name of the Exhibits : Diminished Stimulation: What the exhibit says about : Weightlessness also reduces the tone and threshold of the central nervous system. This means the brain activity tends to diminish., Mode of communication : Graphic Panel display, Exhibit Type : Static, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/ Internet point/ Electrical point : N/A, Overall size of display and Exhibit : Overall size: 4' x 2' Graphic Panel Size: 4' L x 8' H, Multimedia Content/ Software : N/A, ELV : N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 1200mm x 2400mm mounted on gallery interior walls fixed with the necessary wooden/ ply boxing with hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ). Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden/ ply boxing with hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray. Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : N/A,

Name of the Exhibits : Food in the Space: What the exhibit says about : In the past dehydrated condensed food were sent which used to be rehydrated at the time of consumption., Mode of communication : Replica and Graphic Panel Display., Exhibit Type : Static, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/ Internet point/ Electrical point : Electrical, Overall size of display and Exhibit : Overall size: 4' x 2' Replica Size: Life Size, Graphic Panel Size: 4' L x 8' H, Multimedia Content/ Software : N/A, ELV : N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 1200mm x 2400mm mounted on gallery interior walls fixed with the necessary wooden/ ply boxing with hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ). Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden/ ply boxing with hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray. Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Niche (2000 L x 250 D x 2100 H) : Partition made of 19 mm thk ply with required wooden and GI frame work finished with 1 mm thk laminate as required and depth 150mm to 200mm and height upto 3.0 mtwith edge finish of matching PVC edge with required size and provision of profile light on the edges and spot light on topwith wherever required toughened glass shutter with required accessories and hardware etc. complete (Shape and size will be differ as per exhibit requirement during executions.) Objects: Replicas placed inside Acrylic boxes embedded in wall panel with support of graphic panels. Standy : Pedestal/base structure In Acrylic with floor levellers and removable frame with mirror screws. The pedestal/exhibit to be grouted to the floor wherever necessary basis the load and stability of the exhibit and related interactions. Complete in all respects. Refer to typical details drawings of screen mounting and pedestals. Food Replicas Materials: High-quality silicone or resin to create life-like replicas of space foods (freeze-dried items, vacuum-packed meals, dehydrated fruits). Labels: Each food replica labeled with a small metal or acrylic plaque describing the food, preservation method, and use in space missions.,

Item Description

Supply, Installation, testing and commissioning of Addressable Monitor Module, 100percentage soft addressed from panel, integral short circuit isolators, capable of monitoring NO/NC contacts, Option to choose operation mode as supervision or activation immediate to connect NO/NC contacts such as pressure switch, flow switches, fire pump contacts etc.  The device shall be with inbuilt isolator.

Supply, Installation, testing and commissioning of Addressable Control  Module, 100percentage soft addressed, integral short circuit isolators, Relay contact to drive load up to 1Amps at 30VDC, Changeover relay contacts, module for shutting down AHU’s, and magnetic fire door holders, Elevator recall, fire damper, pressurization fan, speakers, strobes etc. The device shall be with inbuilt isolator.

SITC of Response Indicator for above detectors.

SITC of Supply installation of red colour fire cable confirming to NFPA 70 / 72. 2 core, 1.5 sq mm copper, FRLS, with GI saddle spacers, compatible with GI junction boxes, lugs, cable compression glands, tags and ferulling.

Fire Signage : Fire Hydrant: 4" X 12" Design , supply and installation of safety signages Comprising from Modular Aluminium extrusions (Alloy 6060 as per EuropeanstandardsEN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminiumhomogeneous billet)with premium grade anodizing (Thickness 15-20 microns) as per international standards, with 10 years warranty under normal working conditions. Profile to form frame with overall depth of 10 mm with media of thickness upto 3mm. 2 mm thick PVC Foam Sheet .Media printed on autoglow hign luminous vinyl pasted on PVC,pictograms as per design. I-sign Fix profile of Cosign make withM.Szinc coated corners with grub screws. Installed at site in plumb and level at specified locationas per drawing to the satisfaction of the engineer-in-charge. Providing AUTOGLOW Signages in Block / Small Letters of Specified Sizes:

"ABC" Extinguisher: 8" X 4" : "-: Do -" as per above specification for complete work.

"CO2" Extinguisher: 8" x 4" "-: Do -" as per above specification for complete work.

Fire Equipment : size: 4" X 12" "-: Do -" as per above specification for complete work.

Supply, fixing, testing and commissioning of Automatic Linear pneumatic Tube Detection based Novec 1230/ FK5-1-12 System for Electrical Panels (consisting of the following components: 5 Lb Novec 1230/ FK5-1-12, DLP Assembly with automatic valve mounted on DOT approved cylinder, push in connector for tube, 5lb Novec 1230/ FK5-1-12 gas, mounting bracket, End of Line adopter and low pressure switch for monitoring system activation.

10 Lb Novec 1230/ FK5-1-12, DLP Assembly with automatic valve mounted on DOT approved cylinder, push in connector for tube, 10 lb Novec 1230/ FK5-1-12 gas, mounting bracket, End of Line adopter and low pressure switch for monitoring system activation.

Linear pneumatic heat Detection Tube with all necessary fittings and supports

Supply, fixing, testing and commissioning of 1x80 Itr completely system with CCOE approved high pressure, seamless Cylinders having suitable 80 ltr water capacity and suitable to store Novec 1230 (FK5-1-12) gas at 34.5 bar pressure with valve assembly, low pressure supervisory switch for monitoring cylinder pressure gauge with safety burst disc safety cap, elbow and other accessories, mounting bracket, container straps, NRV. Electrically operated control head capable of being electrically operated from the fire detection and control, Pressure operated control head which shall allow for pressure actuation of gas mounted directly on top of cylinder valve, manually operated actuator to actuate the gas flooding process with the help of a lever, flexible rubber hose with wire bralded enforcement to route the gas from the storage cylinder to the discharge piping, to be connected to the discharge outlet of gas cylinder valve and to be terminated at the system piping or discharge manifold, Flexible actuation hose complete as required. Discharge nozzle, 180/360 degree. Designated to provide proper flow rate and distribution Novec 1230 (FK5-1-12) gas to flood the hazard area as per requirement. Electrical non conductive, Novec 1230 (FK5-1-12) required as per NFPA 2001 latest addition 4.7percentage Design Concentration. Piping ASTM grade A 106 schedule 40 with fittings and supports and Gas Release Panel compatible to Fire Alarm System. Makes : Firetrex / Trace fire/Safe Fire as approved by architect

Providing and erecting approved make AMF control panel suitable for following size of 3 phase, 415 V., 50 cycles, A.C. diesel generating set complete of scope as detailed below: 1) Power module: A pair of electromechanically interlocked contactors (for mains and generator) Overload relay for generator contactor Neutral contactor for mains and generator Power socket for connections. 2) Control and metering module: Line voltage monitor. Generator voltage monitor Ammeter 3 items attempt start facility. Air circuit breakers/MCB/MCCB of suitable rating for auto/manual operation. Auto/manual switch. Emergency stop push buttons. Manual start push button. frequency meter. Engine hour meter. Two earthing studs. 3) Protection module: The engine shutdown in the unlikely event of Low lube oil pressure High cylinder head temperature. V belt failure. 4) Indicators with alarm Load on generator. 5) Indicators Load on mains Engine fails to start . Emergency stop battery charger. The AMF Panel of following capacity (F) AMF Control Panel for 380 KVA/ 400 KVA3 phase DG Set

Immersive Dome: Supplying, installing, commissioning and testing Immersive Dome of Fulldome Pro, Orbit Animate, Ageless Entertainments as per approved make by DTA/Authority. a) 7 m Super Reality dome for indoor installation with projectors equipment truss on top and projection covering walls and floor. Provision for cooling inside dome Single door entry exit Negative pressure screen with blowers to inflate in under 20 mins; ideal for projection quality. b) Media Server with 6 video outputs and fully automatic software for Calibration in less than 30 mins (geometric alignment, color blends, edge blending, black level compensation and gamma matching) Content set of Super Reailty movies Wireless and remote control function including iPad, Camera with Fisheye lens and tripod. c) Laser Projectors 2D 6 x laser (Panasonic/Barco/Christie/Delta/Optoma), (6000+ ANSI Lumens / 1920x1200 resolution / 1200:1 contrast / 20,000 hours laser phosphor / 0.7 - 1.0 TR). d) Digital Sound System 10.2 of JBL or Yamaha or equivalent make. 60W Surround Sound, Control 25 Av. e) Cables (HDMI, Ethernet, Control, Power). f) Services: - Project development, - 1 year warranty inclusive, - Complete set of drawings, specifications, - Manuals, - Installation, - Training for operators. Work complete including all type of material, fittings, fixtures, finish, loading , unloading, safety measures, transportation, shop drawing, all leads, all lift, accessories, sample mockup, all floor, all levels, all heights etc complete as per detailed drawings, specifications and instruction of Authority/Authority. sample mock shall be approved from DTA/Authority. g) Content :Supply and licensing of a full content package containing a minimum of five space science-related movies. The vendor shall provide preview access, final licensed content, and the licence rights for educational display to GCSC.

Angular Momentum Chair: Here is a single seated merry-go-round. Sit and keep the two sliding weights away from the centre with the help of handles provided.The speed of the merry-go-round increases automatically. Type: Interactive. Overall size of display and Exhibit: Overall dimension for single place space: 8' x 8' feet. Material Treatment and Finishes: A revolving chair with protective structure on surrounding made of MS with anti corrosive paint and place for a chair on center. It can revolve on central part. Two weights placed on both sides of the chair and visitor can change location of the weight horizontally to control the speed. General Specification: All material and equipment used to be outdoor compatible and industrial grade.All foundation/civil work required for the exhibit is included in the exhibit cost itself. Foundation, design, loading, etc. t o be provided by CMA to furnish the exhibit complete in all respects.The build should include all components of electronics/electrical work that is required for this experience to be complete.

Periscope: A periscope is defined as an instrument used for observing over, around or through an obstacle or object which is prevented by direct line of sight. It consists of an outer case with mirrors at each end at 45° angle. These mirrors are placed parallel to the surface. Type: Interactive. Overall size of display and Exhibit: Overall dimension: 10' x 10' feet, Material Treatment and Finishes: A periscope to be designed to look over an obstacle of 15 ft hiegh wall . Athe pipe diameter is 150mm with easy and smooth nevigation. Mirror system should be easily accessible for regular cleaning and system should be designed to withstand 5 lakh cycles of operations. General Specification: All material and equipment used to be outdoor compatible and industrial grade.All foundation/civil work required for the exhibit is included in the exhibit cost itself. Foundation, design, loading, etc. t o be provided by CMA to furnish the exhibit complete in all respects.The build should include all components of electronics/electrical work that is required for this experience to be complete.

Gyroscope: Stabilizing motion in space using a flywheel, which has a large amount of inertia. Type: Interactive. Overall size of display and Exhibit: Overall dimension: 8' x 8' feet. Material Treatment and Finishes: The seating arrangement can very smoothly and effortlessly rotte. Thrust bearing, taper roller bearing combination to be used. Th wheel in front of the boy can be rotated at a high speed with hand only. With the help of the handle a visitor can rotate the flywheel system on horizontal axis. Flywheel is of 450mm dia with an agregate weight of almost 1,5 Kg. he system should be designed to withstand 5 lakh cycles of operations. General Specification: All material and equipment used to be outdoor compatible and industrial grade.All foundation/civil work required for the exhibit is included in the exhibit cost itself. Foundation, design, loading, etc. t o be provided by CMA to furnish the exhibit complete in all respects.The build should include all components of electronics/electrical work that is required for this experience to be complete.

Momentum Seesaw: The connection between weight and distance from the pivot of the pendulum. Type: Interactive. Overall size of display and Exhibit: Overall dimension: 12' x 12', Material Treatment and Finishes: A see-saw platform to be designed and developed as shown in the figure . Over all size is 600mm X 3000 mm. The platform will attin maximum heigt of 600mm at its tip. The system should be designed to have a loading of 500 kg at tips and system should be designed to withstand 5 lakh cycles of operations. General Specification: All material and equipment used to be outdoor compatible and industrial grade.All foundation/civil work required for the exhibit is included in the exhibit cost itself. Foundation, design, loading, etc. t o be provided by CMA to furnish the exhibit complete in all respects.The build should include all components of electronics/electrical work that is required for this experience to be complete.

Whispering Dishes: A whisper that can be heard at a distance. Two “satellite dishes” are spaced far apart from one another. In the focal point of the “dish” is a point where speech can be clearly heard. Type: Interactive. Overall size of display and Exhibit: Overall dimension for single place space: 8' x 8' feet, Material Treatment and Finishes: Two FRP parabolic reflectors of diameter 1500 mm of high surface finish and minimum aberation are fixed 30 mtr apart as shown in the figare. Focuses are located with proper frame work. If two visitors whisper at the focuses one can hear the other. General Specification: All material and equipment used to be outdoor compatible and industrial grade.All foundation/civil work required for the exhibit is included in the exhibit cost itself. Foundation, design, loading, etc. t o be provided by CMA to furnish the exhibit complete in all respects.The build should include all components of electronics/electrical work that is required for this experience to be complete.

Space Gallery Map: What the exhibit says about: Map of the Gallery. Mode of communication: Model of Hall of space with Graphic Panel. Exhibit Type: Static.

Exhibits: The Concept of space through ages.: What the exhibit says about: It talks about how the mankind envisaged the space through ages as the civilization progressed and where our understanding about space stands now in the light of modern science. Mythological and spiritual concepts also needs to be added. Model of Hall of space with Graphic Panel: A graphic panel with write-up. Exhibit Type: Static. Data point/ Internet point/ Electrical point: Electrical. Overall size of display and Exhibit: Overall size: 6' x 2' feet, Graphic Panel Size: 4' L x 8' H feet. Info display/Signage: Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 1200mm x 2400mm mounted on gallery interior walls fixed with the necessary wooden / ply boxing with hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ). Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden/ ply boxing with hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray. Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired). Material Treatment and Finishes: Standy : Pedestal/base structure In Acrylic with floor levellers and removable frame with mirror screws. The pedestal/exhibit to be grouted to the floor wherever necessary basis the load and stability of the exhibit and related interactions. Complete in all respects. Refer to typical details drawings of screen mounting and pedestals.

Exhibits: A void space- not so void.: What the exhibit says about: It talks about, galaxies, stellar cloud, and host of other thing which explains that space is full of matter and energy like planets, stars, satellites, comets, black holes and any other celestial entity. Mode of communication: Multimedia explaining what is Void Space and tells if space is a void place or not. Exhibit Type: Multimedia. Multimedia hardware requirements and Desired size: LED Display Panel Screen size: 65". Audio: Voice over, Minimum 2 languages and subtitles. Data and Electrical point. Overall size of display and Exhibit: Overall size: 9' x 2' feet, Graphic Panel Size: 4' L x 8' H feet. Multimedia Content /Software: A short film (30 Sec) about "A Void Space Not So Void in Space," the concept of cosmic voids—vast, empty-seeming regions between galaxies—is explored. The film would show that while these areas may appear empty, they are far from devoid of activity. It would highlight that even in the emptiest parts of space, there are quantum fluctuations, cosmic microwave background radiation, and dark matter filling the void. The film would explain how dark matter influences galaxies, dark energy drives the expansion of the universe, and gravitational waves ripple through space. By using animations and visuals, the film would illustrate that space, even in its most "empty" regions, is teeming with subtle forces, energy, and invisible phenomena, making the void not truly void at all. ELV: 65" Display Technology IPS/ VA , 3840x2160 (HD) , Brightness 350/500Nits abd Above , Contrast Ration : 4000:1 , 3 HDMI , 1 RJ45, RS232, 2-USB ,Antiglare Display , Builtin Wifi , Built in Browser , Smart- Screen Mirrioing , Play Via URL , Auto Wakeup , USB Play Video / Audio, Security- USB, Wifi, and Remote Lock , Speaker 20W (10Wx2) , Power Cable OS- TIzen / Web OS, RDP mode(Remote Desktop Protocol. Info display/Signage: Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 1200mm x 2400mm mounted on gallery interior walls fixed with the necessary wooden/ ply boxing with hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ). Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden/ ply boxing with hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray. Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired). Material Treatment and Finishes: Standy : Pedestal/base structure In Acrylic with floor levellers and removable frame with mirror screws. The pedestal/exhibit to be grouted to the floor wherever necessary basis the load and stability of the exhibit and related interactions. Complete in all respects. Refer to typical details drawings of screen mounting and pedestals.

Exhibits: Einstin's General Relativity.: What the exhibit says about: Double gravity well and fly by method. Mode of communication: Double gravity well and working model. Exhibit Type: Interactive. Electrical point Overall size of display and Exhibit: Overall size: 5' x 7', Model Size: 5' L x 3' H, Graphic Panel Size: 4' x 8', Info display/Signage: Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 1200mm x 2400mm mounted on gallery interior walls fixed with the necessary wooden/ ply boxing with hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ). Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden/ ply boxing with hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray. Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired). Material Treatment and Finishes: Base (1.7 sqmt): Required shape and size stage with fabrication work for levelling of stage ht up to150-300 mm as per exhibit requirment finished with structure ply and Vinyl / Laminate flooring material finish. Facia finish with wooden beading matching with paint including concealed LED lighting etc complete. (Refer BOQ Item No. 7.11 ) (Shape and size will be differ as per exhibit requirement during executions.) Free standing replica of space suite embedded in free standing table wherever necessary basis the load and stability of the exhibit and related interactions. Fabricated Spacetime Well: A stretched elastic fabric membrane mounted on a circular frame to simulate spacetime curvature. Visitors can place weighted objects (metal or resin spheres) to observe how spacetime "warps" based on mass. Elastic Fabric: Stretchable lycra or similar material for the spacetime simulation. Weights: Non-toxic resin or stainless steel balls of varying sizes. Digital Elements: Touchscreen panel with pre-programmed interactive software. Rounded Edges: Smooth edges to prevent injury. Stable Base: Anti-slip pads to ensure the exhibit does not shift during interaction.

Exhibits: What is the Earth's atmosphere?: What the exhibit says about: It talks about the constituents of Earth Atmosphere, Pressure, How it formed and how it changed through ages. Mode of communication : A graphic panel supported with Multimedia display. Exhibit Type: Multimedia. Multimedia hardware requirements and Desired size: Touch Screen on wall : 55", Data+ Electrical, Overall size of display and Exhibit: Overall size: 6' x 2', Graphic Panel Size: 2' L x 4' H, Multimedia Content /Software: Application to be developed for the required interaction including UI, application development and programming. It should include What is the Earth's Atmosphere? takes viewers on a visually captivating journey to explore the layers and functions of Earth's atmosphere. It explains how this vital, protective layer of gases—composed mainly of nitrogen, oxygen, and trace amounts of other gases—supports life on our planet. Through stunning visuals and expert insights, the film delves into the atmosphere's role in regulating temperature, protecting us from harmful solar radiation, and enabling weather patterns. It also examines the growing concerns around climate change and human impact on the delicate balance of our atmosphere. Should be in minimum 2 languages. Application should have FHD images/ videos. To be approved by Authority and DTA. ELV: 400 NIts UHD(3840x2160) Integrated Capacitive Touch, 2xHDMI,DVI, DP,USBx2, LAN, 8 GB Internal Memory, Magic Infolite Software, Speakers, Wifi , Built in Browser , Smart- Screen Mirrioing , Play Via URL , Auto Wakeup , USB Play Video / Audio, Security- USB, Wifi, and Remote Lock , Speaker 20W (10Wx2) , Power Cable OS- TIzen / Web OS, RDP mode(Remote Desktop Protocol. Info display/Signage: Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 1200mm x 2400mm mounted on gallery interior walls fixed with the necessary wooden/ ply boxing with hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ). Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden/ ply boxing with hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray. Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired). Material Treatment and Finishes: Standy : Pedestal/base structure In Acrylic with floor levellers and removable frame with mirror screws. The pedestal/exhibit to be grouted to the floor wherever necessary basis the load and stability of the exhibit and related interactions. Complete in all respects. Refer to typical details drawings of screen mounting and pedestals.

Exhibits: What is End of Atmosphere to the actual realm of Space?: What the exhibit says about: How is the border line of Atmosphere and Space, its specifications, Describing the transition from atmospheric layers to the actual realm of Space. Also providing information about atmosphere and escape velocity. Mode of communication: Group of Visitors standing inside the existing dome (replacement of Miya Phuski Show), Vertical multiple screens are installed wherein a space craft is moving through the atmosphere displayed. And as it is gaining height, the layers are changing and an audio commentary describing the layer components. Few walls inside the dome can be backlit vinyle display of atmospheric layers. Exhibit Type: Interactive. Multimedia hardware requirements and Desired size: 6no. 65" LED Screens placed vertically, Voiceover, Minimum 2 languages and subtitles, Data+ Electrical point. Overall size of display and Exhibit: Overall size: 26' dia, Graphic Panel Size: 2' L x 8' H_4 Nos., Multimedia Content /Software: A 5 min film would begin by describing the boundary where Earth's atmosphere ends and space begins, known as the Kármán line, located about 100 kilometers (62 miles) above sea level. It would highlight how, as you ascend, the atmosphere becomes thinner and thinner, eventually giving way to the vacuum of space. The film would contrast the protective role of the atmosphere—providing oxygen, shielding us from radiation, and maintaining climate—with the hostile environment of space, which lacks air, pressure, and life-sustaining conditions. It would emphasize that while the atmosphere is crucial for life, the vast emptiness of space beyond is where the true challenges of space exploration begin, with extreme temperatures, radiation, and the absence of breathable air. The film would conclude by showing how our atmosphere serves as a protective barrier that makes life on Earth possible, and space, though vast and infinite, is a harsh, inhospitable realm., ELV: 65" Display Technology IPS/ VA , 3840x2160 (HD) , Brightness 350/500Nits abd Above , Contrast Ration : 4000:1 , 3 HDMI , 1 RJ45, RS232, 2-USB ,Antiglare Display , Builtin Wifi , Built in Browser , Smart- Screen Mirrioing , Play Via URL , Auto Wakeup , USB Play Video / Audio, Security- USB, Wifi, and Remote Lock , Speaker 20W (10Wx2) , Power Cable OS- TIzen / Web OS, RDP mode(Remote Desktop Protocol. , Info display/Signage: Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 2400mm mounted on gallery interior walls fixed with the necessary wooden/ ply boxing with hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ). Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden/ ply boxing with hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray. Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes: Panel : Base structure made up of MR grade ply wood with necessary wooden/GI framing finished with 1 mm thk laminate with edge finish of matching PVC edge with required size and provision of profile light on the edges.as required inside .Screen embedded into FRP panelling with required finishing .fixing ventilation and sound system arrangement with required accessories and fitting Screens and Visuals Vertical Screens:Six LED panels (4K resolution) with anti-glare coating, mounted vertically inside the dome.Edge-lit or direct-lit backlight technology for vibrant, high-contrast visuals. Backlit Vinyl Walls:Printed graphics of atmospheric layers on acrylic or vinyl sheets with integrated LED backlighting. Audio and Commentary: Surround Sound System: Integrated 5.1 or 7.1 surround sound with directional speakers placed strategically around the dome. Pre-synchronized audio commentary in multiple languages. Interactive Features Floor Simulation:Hydraulic motion control system for synchronized floor vibrations mimicking spacecraft ascent. Lighting Effects: Programmable dynamic LED lighting simulating atmosphere transitions like auroras or thermal layers. Power and Control Systems Centralized Control Panel:Hardware to manage visuals, sound, and floor vibrations seamlessly.,

Exhibits: What is Lack of Atmospheric Diffusion. : What the exhibit says about: Generally space is devoid of any particle. So light is everywhere, it is not diffused at all. The challenges it poses due to no diffusion. One side of an object getting hot and the other side frozen. Mode of communication: Graphic panel, Multimedia and an working explanatory exhibit., Exhibit Type: Multimedia, Multimedia hardware requirements and Desired size: 55" LED Display Panel, Voiceover, Minimum 2 languages and subtitles, Data+ Electrical, Overall size of display and Exhibit: Overall size: 4' x 4', Graphic Panel Size: 2' L x 4' H, Multimedia Content /Software: A 30 sec film would begin by describing atmospheric diffusion as the process by which gases, heat, and particles naturally spread and mix within the atmosphere. This process is essential for maintaining a balanced climate and for distributing oxygen, moisture, and other elements around the planet. The film would then explain that lack of atmospheric diffusion occurs when the atmosphere becomes stagnant or unable to properly mix, often due to factors like temperature inversions or air pressure changes. This can lead to issues such as pollution buildup, local climate imbalances, or extreme weather conditions, which can negatively impact ecosystems and human health. Finally, the film would highlight that without proper diffusion, gases like carbon dioxide can accumulate, exacerbating the greenhouse effect and contributing to global warming. The film would conclude by stressing the importance of maintaining healthy atmospheric processes for the stability of life on Earth., ELV: 55" Display Technology IPS/ VA , 3840x2160 (HD) , Brightness 350/500Nits abd Above , Contrast Ration : 4000:1 , 3 HDMI , 1 RJ45, RS232, 2-USB ,Antiglare Display , Builtin Wifi , Built in Browser , Smart- Screen Mirrioing , Play Via URL , Auto Wakeup , USB Play Video / Audio, Security- USB, Wifi, and Remote Lock , Speaker 20W (10Wx2) , Power Cable OS- TIzen / Web OS, RDP mode(Remote Desktop Protocol. , Info display/Signage: Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden/ ply boxing with hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ). Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden/ ply boxing with hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray. Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes: Standy : Pedestal/base structure In Acrylic with floor levellers and removable frame with mirror screws. The pedestal/exhibit to be grouted to the floor wherever necessary basis the load and stability of the exhibit and related interactions. Complete in all respects. Refer to typical details drawings of screen mounting and pedestals.

Exhibits: I shall be a balloon and explode: What the exhibit says about: In absence of atmospheric protection, if we are exposed to space bare body, we shall simply explode and vanish., Mode of communication: Experimenting on ballooning effect with reduced pressure-an working exhibit and Graphic panel., Exhibit Type: Interactive, Data+ Electrical, Overall size of display and Exhibit: Overall size: 4' x 4', Graphic Panel Size: 2' L x 4' H, Info display: Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden/ ply boxing with hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ). Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden/ ply boxing with hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray. Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes: Table - 2 : [600-750 L x 750-900 W x 750 H (Glass case H_300)] Table as per required size and shape 8mm MR plywood with necessary wooden/MS framing finished with 1.2mm laminate and 6mm thk corian cladding facia required sizes with floor levellers. The pedestal/exhibit to be grouted to the floor wherever necessary basis the load and stability of the exhibit and related interaction.Table top with toughened glass/clear acrylic case as per required size for visibility of exhibit.Opening and air ventilation system arrangement where ever required. (Shape and size will be differ as per exhibit requirement during executions.) Enclosure: Transparent acrylic chamber (5mm thick) for visibility during the demonstration. Pressure Mechanism: Vacuum Pump: High-efficiency electric vacuum pump for reducing internal pressure. Control Panel: Includes pressure gauge and an adjustable valve system to regulate vacuum levels. Interactive Components: Balloon Setup: Pre-installed latex balloons positioned on a central nozzle inside the chamber. Easy-to-replace balloon holders for repeated use. User Interface: Button Activation: Single push-button control for starting the vacuum pump. Safety Glass: View panel made of shatterproof acrylic to ensure safety. Digital Readout: Displays real-time pressure levels inside the chamber. Safety Features: Emergency Stop: Easily accessible stop button to immediately halt the vacuum pump. Pressure Limiter: Prevents over-reduction of pressure to protect the equipment and participants.,

Exhibits: The hostile environments of other planets? : What the exhibit says about: A comparative study of Temperature, pressure, Atmosphere and its constituents, Mode of communication: Graphic Panel , Exhibit Type: Static, Overall size of display and Exhibit: Overall size: 8' x 2', 4no. Graphic Panel Size:4'' L x 8' H each, Info display : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 1200mm x 2400mm mounted on gallery interior walls fixed with the necessary wooden/ ply boxing with hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ). Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden/ ply boxing with hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray. Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired).,

Exhibits: Astronaut tools and equipment for interplanetary travel?: What the exhibit says about: An Astronaut needs a set of tools and tackles while stepping on the soil of a different Planet, Mode of communication: Replica of actual tools and its display with explanation of there usages + Multimedia., Exhibit Type: Multimedia, Multimedia hardware requirements and Desired size: LED Display :55" screen, Data+ Electrical point, Overall size of display and Exhibit: Overall size: 4' x 2', Graphic Panel Size: 2' L x 4' H, Multimedia Content /Software: A 30 secfilm would begin by showcasing the spacesuit, which is crucial for protection in the harsh environment of space. It would highlight its features: life support systems (for oxygen, temperature regulation, and waste management), radiation shielding, and mobility to ensure astronauts can safely work in space.Next, the film would cover other essential tools like space habitats (for long-term living), advanced communication systems (to stay in contact with mission control), and propulsion systems (like ion engines or nuclear-powered thrusters) that would allow spacecraft to travel between planets. The film would also feature scientific instruments, such as rovers for planetary exploration, drills for sample collection, and drones for surveying terrain. Additionally, it would briefly touch on power sources like solar panels and nuclear reactors needed for energy in deep space. The film would conclude by emphasizing the importance of these tools and equipment in ensuring astronaut survival, exploration, and scientific discovery on long-term interplanetary missions., ELV: 55" Display Technology IPS/ VA , 3840x2160 (HD) , Brightness 350/500Nits abd Above , Contrast Ration : 4000:1 , 3 HDMI , 1 RJ45, RS232, 2-USB ,Antiglare Display , Builtin Wifi , Built in Browser , Smart- Screen Mirrioing , Play Via URL , Auto Wakeup , USB Play Video / Audio, Security- USB, Wifi, and Remote Lock , Speaker 20W (10Wx2) , Power Cable OS- TIzen / Web OS, RDP mode(Remote Desktop Protocol. , Info display/Signage: Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary ply / wooden framing, hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ). Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden/ ply boxing with hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray. Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes: Display Cupboard 10'-12' L x 1'- 1'6"D : Display as per required size made up 12mm MR plywood with necessary wooden/MS framing finished with 1.2mm laminate. The pedestal/exhibit to be grouted to the floor wherever necessary basis the load and stability of the exhibit and related interactions .Glass/acylic case as per exhibit requirment. Bottom considering required all accessories and opening system arrangement where ever required. (Shape and size will be differ as per exhibit requirement during executions.) Objects : Replica of tools used in space.

Exhibits: Delving into Our Solar System: What the exhibit says about: A model of solar system with proportionate size and distance, Mode of communication: The Sun and all planets hung from the roof with propotionate diameter and distance utiling great height of 25 feet., Exhibit Type: Interactive, Overall size of display and Exhibit: Overall size: 13' x 13', Material Treatment and Finishes: Object : Model of all planets made of FRP with illumination, proportionate sized as per the description. Hanged from ceiling. Mechanism to be worked out that planets revolves around the sun at proportionate speed. Standy : Pedestal/base structure In Acrylic with floor levellers and removable frame with mirror screws. The pedestal/exhibit to be grouted to the floor wherever necessary basis the load and stability of the exhibit and related interactions. Complete in all respects. Refer to typical details drawings of screen mounting and pedestals.

Exhibits: What is planetary positioning system? : What the exhibit says about: Shows position of the planets on a specific date and time. Input shall be given by a visitor., Mode of communication: Enter a specific date on the touch screen and it'll show the exact position of the planets on that date and time., Exhibit Type: Interactive, Multimedia hardware requirements and Desired size: Touch Screen on wall : 55", Data+ Electrical point, Overall size of display and Exhibit: Overall size: 5' x 3', Multimedia Content/Software: Application to be developed for the required interaction including UI, application development and programming. Should be in minimum 2 languages. Application should have FHD images/ videos. To be approved by Authority and DTA. ELV: 400 NIts UHD(3840x2160) Integrated Capacitive Touch, 2xHDMI,DVI, DP,USBx2, LAN, 8 GB Internal Memory, Magic Infolite Software, Speakers, Wifi , Built in Browser , Smart- Screen Mirrioing , Play Via URL , Auto Wakeup , USB Play Video / Audio, Security- USB, Wifi, and Remote Lock , Speaker 20W (10Wx2) , Power Cable OS- TIzen / Web OS, RDP mode(Remote Desktop Protocol. , Material Treatment and Finishes: Standy : Pedestal/base structure In Acrylic with floor levellers and removable frame with mirror screws. The pedestal/exhibit to be grouted to the floor wherever necessary basis the load and stability of the exhibit and related interactions. Complete in all respects. Refer to typical details drawings of screen mounting and pedestals.,

Space Suit: What protects you in space?, What the exhibit says about: It maintains pressure at 3 psi, supply and scrub oxygen, maintains humidity, and protects from UV radiation., Mode of communication: Display of a replica space suit with full detail and explanation of its different parts. Exhibit Type: Static, Overall size of display and Exhibit: Overall size: 6' x 5', Replica Size: Life Size, Graphic Panel Size: 2' L x 4' H, Info display/Signage: Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden/ ply boxing with hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ). Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden/ ply boxing with hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray. Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes: Base (1.7 sqmt): Required shape and size stage with fabrication work for levelling of stage ht up to150-300 mm as per exhibit requirment finished with structure ply and Vinyl / Laminate flooring material finish. Facia finish with wooden beading matching with paint including concealed LED lighting etc complete. (Refer BOQ Item No. 7.11 ) (Shape and size will be differ as per exhibit requirement during executions.) Object : Cut section of real space suit showing all the materials which is used to maintain the comfortable environment for astronaut in space. Space suit replica of Rakesh Sharma.,

Name of the Exhibits : Are space suits entirely safe?: What the exhibit says about : Stories of some historical failure of space suits , Mode of communication : Graphic panels and Multimedia and videos., Exhibit Type : Multimedia, Multimedia hardware requirements and Desired size : LED Display: 55 inch displat embedded in wall panel, Audio : Voiceover, Minimum 2 languages and subtitles, Data point/ Internet point/ Electrical point : Data+ Electrical, Overall size of display and Exhibit : Overall size: 4' x 2', Graphic Panel Size: 2' L x 4' H, Multimedia Content/ Software : A 30 Sec film would discuss the challenges and risks that space suits still face. While suits are highly reliable, they are not perfectly safe. Issues such as suit malfunctions, pressure loss, or communication failures can pose serious risks during spacewalks or missions. The film would also address the difficulty of mobility in the suits, which can limit astronauts' ability to perform tasks and increase fatigue.the film would conclude by acknowledging that while space suits are highly advanced and continually improving, space exploration inherently involves risks, and safety remains a top priority for future missions., ELV : 55" Display Technology IPS/ VA , 3840x2160 (HD) , Brightness 350/500Nits abd Above , Contrast Ration : 4000:1 , 3 HDMI , 1 RJ45, RS232, 2-USB ,Antiglare Display , Builtin Wifi , Built in Browser , Smart- Screen Mirrioing , Play Via URL , Auto Wakeup , USB Play Video / Audio, Security- USB, Wifi, and Remote Lock , Speaker 20W (10Wx2) , Power Cable OS- TIzen / Web OS, RDP mode(Remote Desktop Protocol. , Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden/ ply boxing with hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ). Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden/ ply boxing with hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray. Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : N/A,

Name of the Exhibits : Helmets for Astronauts in Space: What the exhibit says about : In most situations in space, there is an enormous contrast between sunlight and shadow. The helmet visors protect astro­naut from the Sun's direct rays., Mode of communication : Working exhibit of a visor, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/ Internet point/ Electrical point : Electrical, Overall size of display and Exhibit : Overall size: 4' x 2' Instrument size: Life Size Graphic Panel Size: 2' L x 4' H, Multimedia Content/ Software : N/A, ELV : N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden/ ply boxing with hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ). Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden/ ply boxing with hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray. Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Table - 1 (750-900 L x 750-900 W x 600-750 H) : Table as per required size made up 8mm MR plywood with necessary wooden/MS framing finished with 1.2mm laminate and 6mm thk corian cladding facia required sizeswith floor levellers. The pedestal/exhibit to be grouted to the floor wherever necessary basis the load and stability of the exhibit and related interactions (Shape and size will be differ as per exhibit requirement during executions.) Exhibit: Materials: Spacesuit helmet placed on table.,

Name of the Exhibits : Can we get lost in space?: What the exhibit says about : Most tasks in space necessitates attaching the astronaut securely with the surface of the space craft., Mode of communication : Models and display of different methods of securing with the space craft., Exhibit Type : Static, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/ Internet point/ Electrical point : Electrical, Overall size of display and Exhibit : Overall size: 6' x 6' Replica Size: 6' high each/ Life size for smaller instruments Graphic Panel Size: 2' L x 4' H, Multimedia Content/ Software : N/A, ELV : N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden/ ply boxing with hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ). Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden/ ply boxing with hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray. Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Base (2.95 sqmt): Required shape and size stage with fabrication work for levelling of stage ht up to150-300 mm as per exhibit requirment finished with structure ply and Vinyl / Laminate flooring material finish. Facia finish with wooden beading matching with paint including concealed LED lighting etc complete .(Refer BOQ Item No. 7.11 ) (Shape and size will be differ as per exhibit requirement during executions.) Exhibit: Models as described are placed on table.,

Name of the Exhibits : What is tumbling? : What the exhibit says about : Space walk is never undertaken without thorough training. Tumbling is one of the major hazards in space walk., Mode of communication : Backlit Graphic Panel, Exhibit Type : Static, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/ Internet point/ Electrical point : Electrical, Overall size of display and Exhibit : Overall size: 4' x 2' Graphic Panel Size: 4' L x 8' H, Multimedia Content/ Software : N/A, ELV : N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 1200mm x 2400mm mounted on gallery interior walls fixed with the necessary wooden/ ply boxing with hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ). Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden/ ply boxing with hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray. Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Base (2.95 sqmt): Required shape and size stage with fabrication work for levelling of stage ht up to150-300 mm as per exhibit requirment finished with structure ply and Vinyl / Laminate flooring material finish. Facia finish with wooden beading matching with paint including concealed LED lighting etc complete .(Refer BOQ Item No. 7.11 ) (Shape and size will be differ as per exhibit requirement during executions.),

Name of the Exhibits : Types of tools are utilized in space?: What the exhibit says about : Description of some of the tools used in space, Mode of communication : Models and Photographs, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/ Internet point/ Electrical point : N/A, Overall size of display and Exhibit : Overall size: 4' x 2' Model Size: Life size, Multimedia Content/ Software : N/A, ELV : N/A, Info display/Signage : N/A, Material Treatment and Finishes : Table - 2 (750-900 L x 750-900 W x 750 H): Table as per required size and shape 8mm MR plywood with necessary wooden/MS framing finished with 1.2mm laminate and 6mm thk corian cladding facia required sizeswith floor levellers. The pedestal/exhibit to be grouted to the floor wherever necessary basis the load and stability of the exhibit and related interaction.Table top with toughened glass/clear acrylic case as per required size for visibility of exhibit.Opening and air ventilation system arrangement where ever required. (Shape and size will be differ as per exhibit requirement during executions.) Exhibit Materials: Tools in space as per the description to be placed on a table,

Name of the Exhibits : How can we walk in space? : What the exhibit says about : Description and its necessity, Mode of communication : Films, Exhibit Type : Multimedia, Multimedia hardware requirements and Desired size : 65" LED LED Display Panel, Audio : Voiceover Minimum 2 languages and subtitles, Data point/ Internet point/ Electrical point : Data+ Electrical, Overall size of display and Exhibit : Overall size: 4' x 2', Multimedia Content/ Software : In a 30 sec short film about "How Can We Walk in Space?", the focus would be on explaining how astronauts can move and work in the weightless environment of space, particularly during spacewalks (Extravehicular Activity, or EVA). The film would begin by introducing the concept of microgravity, where the lack of gravity in space means astronauts don't "fall" like on Earth. This makes traditional walking impossible, but astronauts can float and use their bodies to move. Next, the film would explain how astronauts use special space suits, like the Extravehicular Mobility Unit (EMU), to protect them from the harsh conditions of space. These suits provide oxygen, regulate temperature, and shield against space debris. The film would show how astronauts use handrails, foot restraints, and jetpacks (like the Manned Maneuvering Unit) to propel themselves and stay anchored during spacewalks. Finally, the film would conclude by emphasizing that while astronauts can’t “walk” in space the way we do on Earth, their equipment and techniques allow them to navigate and work efficiently in the weightless environment of space., ELV : 65" Display Technology IPS/ VA , 3840x2160 (HD) , Brightness 350/500Nits abd Above , Contrast Ration : 4000:1 , 3 HDMI , 1 RJ45, RS232, 2-USB ,Antiglare Display , Builtin Wifi , Built in Browser , Smart- Screen Mirrioing , Play Via URL , Auto Wakeup , USB Play Video / Audio, Security- USB, Wifi, and Remote Lock , Speaker 20W (10Wx2) , Power Cable OS- TIzen / Web OS, RDP mode(Remote Desktop Protocol. , Info display/Signage : N/A, Material Treatment and Finishes : LED Screen embedded in a wall panel, Name of the Exhibits : What is The Manned Maneuverability Unit?: What the exhibit says about : Description of some of the models used in different mission., Mode of communication : , Exhibit Type : , Multimedia hardware requirements and Desired size : , Audio : , Data point/ Internet point/ Electrical point : , Overall size of display and Exhibit : Overall size: 4' x 2', Multimedia Content/ Software : , ELV : , Info display/Signage : , Material Treatment and Finishes : ,

Training Simulator: Name of the Exhibits : The Neutral Buoyancy Simulator: Zero G, How astronauts are being trained?, Six Degree of Freedom: Reduced Gravity, An astronaut in space suit with neutral buoyancy moves inside a huge water tank, Zero G experience is created in an aircraft moving at high altitude in a parabolic trajectory., A simulator which creates low gravity condition, Film and animation with Panel support, : What the exhibit says about : , Mode of communication : , Exhibit Type : Multimedia, Multimedia hardware requirements and Desired size : LED Display: 65" LED LED Display Panel, Audio : Voiceover Minimum 2 languages and subtitles, Data point/ Internet point/ Electrical point : Data+ Electrical, Overall size of display and Exhibit : Overall size: 4' x 4' Graphic Panel Size: 2' L x 4' H, Multimedia Content/ Software : This 120 sec film takes viewers inside the Neutral Buoyancy Simulator (NBS), a giant pool used to train astronauts for spacewalks. The NBS mimics the conditions of zero gravity by allowing astronauts to float and move as they would in space. Wearing full space suits, they practice complex tasks like repairs, tool handling, and navigating spacecraft, all while immersed in water. The film demonstrates how the buoyancy of the water simulates the weightlessness astronauts will experience in space, providing them with hands-on experience before their actual missions.This film explores the rigorous and innovative training methods astronauts undergo to prepare for space missions. It highlights various training environments, including simulators, virtual reality, and neutral buoyancy pools where astronauts practice spacewalks. The film also covers physical conditioning, survival training, and learning to operate spacecraft systems. Through these techniques, astronauts are trained not only to handle the technical aspects of their missions but also to manage the physical and psychological challenges of living and working in space.This film explains the concept of Six Degrees of Freedom (6DoF), which refers to the ability of an object (or astronaut) to move in space along three axes of translation (up/down, left/right, forward/backward) and three axes of rotation (pitch, yaw, and roll). The film showcases how astronauts train in reduced gravity environments like parabolic flights (the "vomit comet") and special simulators to learn to control their movements in the weightless conditions of space. By mastering 6DoF, astronauts can navigate spacecraft, perform repairs, and maneuver in zero-gravity with precision and confidence., ELV : 65" Display Technology IPS/ VA , 3840x2160 (HD) , Brightness 350/500Nits abd Above , Contrast Ration : 4000:1 , 3 HDMI , 1 RJ45, RS232, 2-USB ,Antiglare Display , Builtin Wifi , Built in Browser , Smart- Screen Mirrioing , Play Via URL , Auto Wakeup , USB Play Video / Audio, Security- USB, Wifi, and Remote Lock , Speaker 20W (10Wx2) , Power Cable OS- TIzen / Web OS, RDP mode(Remote Desktop Protocol. , Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden/ ply boxing with hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ). Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden/ ply boxing with hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray. Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Counter (450-600 L x 1200-1500 W x 300-450 H)-: As per required shape and size counter made from 8mm MR plywood with necessary wooden/MS framing finished with 6mm thk corian finished on top and facia bottom 1.2 mm th laminate .Counter support to be grouted to the floor wherever necessary basis the load and stability of the exhibit and related interaction. (Shape and size will be differ as per exhibit requirement during executions.),

Training Simulator: Name of the Exhibits : Centrifuges and G-Force Simulators: What the exhibit says about : A simulator which creates multiple G force condition to train the astronaut to such condition which exist while the Space Ship is accelerating with escape velocity., Mode of communication : A simulator which creates multiple G force condition to train the astronaut, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/ Internet point/ Electrical point : N/A, Overall size of display and Exhibit : Overall size: 6' x 6', Multimedia Content/ Software : N/A, ELV : N/A, Info display/Signage : N/A, Material Treatment and Finishes : Structural Frame Base Frame: Sturdy, powder-coated steel base to support rotating structure. Rotating Arm: High-tensile steel arm with balanced load distribution for safe rotation. Capsule Seats: Two ergonomically designed fiber-reinforced plastic (FRP) seats with seatbelts for safety. Capsule Body: Acrylic and aluminum casing, offering visibility and a lightweight design. Mechanism Manual Rotation: Central rotary wheel within the capsule, operable by users to initiate and control the rotation. Bearings and Axis: Heavy-duty ball bearings for smooth and controlled rotation around a central axis. Safety Features Seat Restraints: Adjustable harness seatbelts to secure participants. Speed Limiter: Mechanical or electronic rotation limiter to maintain safe speeds. Informational Display: Digital or printed panel outside the exhibit explaining centrifugal force and its applications.Interactive examples of real-world scenarios, such as space training and amusement rides..Standy : Pedestal/base structure In Acrylic with floor levellers and removable frame with mirror screws. The pedestal/exhibit to be grouted to the floor wherever necessary basis the load and stability of the exhibit and related interactions. Complete in all respects. Refer to typical details drawings of screen mounting and pedestals. ,

Name of the Exhibits : Human body in absence of atmosphere?: What the exhibit says about : The most immediate human need in space is an atmosphere of acceptable composit1on and pressure, Mode of communication : Graphic Panel, Exhibit Type : Static, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/ Internet point/ Electrical point : N/A, Overall size of display and Exhibit : Overall size: 4' x 2' Graphic Panel Size: 4' L x 8' H, Multimedia Content/ Software : N/A, ELV : N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 1200mm x 2400mm mounted on gallery interior walls fixed with the necessary wooden/ ply boxing with hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ). Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden/ ply boxing with hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray. Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Graphic panels fixed on a wall panel,

Name of the Exhibits : Human body in absence of gravity ?: What the exhibit says about : The full importance of gravity can best be appreciated by looking at some bizarre effects that zero gravity causes: Calcium production for bones stops leading to bone weight loss and susceptibility to bone fracture. Electrolyte imbalances occur. Steroid and other hormonal secretions are suppressed., Mode of communication : A touch sensitive display with an human body with hotspot on body parts showing effect on that part by prolonged zero gravity exposure with supporting Graphic panel., Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : LED Display : 55" interactive touch screen, Audio : N/A, Data point/ Internet point/ Electrical point : Data+ Electrical, Overall size of display and Exhibit : Overall size: 4' x 2', Multimedia Content/ Software : Application to be developed for the required interaction including UI, application development and programming. Should be in minimum 2 languages. Application should have FHD images/ videos. To be approved by Authority and DTA., ELV : 400 NIts UHD(3840x2160) Integrated Capacitive Touch, 2xHDMI,DVI, DP,USBx2, LAN, 8 GB Internal Memory, Magic Infolite Software, Speakers, Wifi , Built in Browser , Smart- Screen Mirrioing , Play Via URL , Auto Wakeup , USB Play Video / Audio, Security- USB, Wifi, and Remote Lock , Speaker 20W (10Wx2) , Power Cable OS- TIzen / Web OS, RDP mode(Remote Desktop Protocol. , Info display/Signage : N/A, Material Treatment and Finishes : Interactive touch screen embedded in wall panel,

Name of the Exhibits : Post-Earth Return: Prevention and Treatment: What the exhibit says about : What are the preventive measures and cure of the disease after returning from the space?, Mode of communication : A backlit informative panel showing preventive measures and cure of the diseases, Exhibit Type : Static, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/ Internet point/ Electrical point : N/A, Overall size of display and Exhibit : Overall size: 4' x 2' Graphic Panel Size: 4' L x 8' H, Multimedia Content/ Software : N/A, ELV : N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 1200mm x 2400mm mounted on gallery interior walls fixed with the necessary wooden/ ply boxing with hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ). Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden/ ply boxing with hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray. Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Graphic panels fixed on a wall panel,

Medical: Psychology : possible disorders: Name of the Exhibits : What followed after returning from space?: What the exhibit says about : Weightlessness has a disturbing effect on the vestibular part of the inner ear and this upsets the equilibrium., Mode of communication : Graphic Panel display, Exhibit Type : Static, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/ Internet point/ Electrical point : N/A, Overall size of display and Exhibit : Overall size: 4' x 2' Graphic Panel Size: 4' L x 8' H, Multimedia Content/ Software : N/A, ELV : N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 1200mm x 2400mm mounted on gallery interior walls fixed with the necessary wooden/ ply boxing with hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ). Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden/ ply boxing with hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray. Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : N/A,

Name of the Exhibits : Diminished Stimulation: What the exhibit says about : Weightlessness also reduces the tone and threshold of the central nervous system. This means the brain activity tends to diminish., Mode of communication : Graphic Panel display, Exhibit Type : Static, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/ Internet point/ Electrical point : N/A, Overall size of display and Exhibit : Overall size: 4' x 2' Graphic Panel Size: 4' L x 8' H, Multimedia Content/ Software : N/A, ELV : N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 1200mm x 2400mm mounted on gallery interior walls fixed with the necessary wooden/ ply boxing with hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ). Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden/ ply boxing with hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray. Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : N/A,

Name of the Exhibits : Food in the Space: What the exhibit says about : In the past dehydrated condensed food were sent which used to be rehydrated at the time of consumption., Mode of communication : Replica and Graphic Panel Display., Exhibit Type : Static, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/ Internet point/ Electrical point : Electrical, Overall size of display and Exhibit : Overall size: 4' x 2' Replica Size: Life Size, Graphic Panel Size: 4' L x 8' H, Multimedia Content/ Software : N/A, ELV : N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 1200mm x 2400mm mounted on gallery interior walls fixed with the necessary wooden/ ply boxing with hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ). Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden/ ply boxing with hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray. Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Niche (2000 L x 250 D x 2100 H) : Partition made of 19 mm thk ply with required wooden and GI frame work finished with 1 mm thk laminate as required and depth 150mm to 200mm and height upto 3.0 mtwith edge finish of matching PVC edge with required size and provision of profile light on the edges and spot light on topwith wherever required toughened glass shutter with required accessories and hardware etc. complete (Shape and size will be differ as per exhibit requirement during executions.) Objects: Replicas placed inside Acrylic boxes embedded in wall panel with support of graphic panels. Standy : Pedestal/base structure In Acrylic with floor levellers and removable frame with mirror screws. The pedestal/exhibit to be grouted to the floor wherever necessary basis the load and stability of the exhibit and related interactions. Complete in all respects. Refer to typical details drawings of screen mounting and pedestals. Food Replicas Materials: High-quality silicone or resin to create life-like replicas of space foods (freeze-dried items, vacuum-packed meals, dehydrated fruits). Labels: Each food replica labeled with a small metal or acrylic plaque describing the food, preservation method, and use in space missions.,

Item Description

Name of the Exhibits : What's time in space?: What the exhibit says about : NaviC Clock provided by ISRO, Mode of communication : Clock (Retain and Shift), Exhibit Type : Static, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/ Internet point/ Electrical point : N/A, Overall size of display and Exhibit : Overall size: 2' x 2' Graphic Panel Size: 4' L x 8' H, Multimedia Content/ Software : N/A, ELV : N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 1200mm x 2400mm mounted on gallery interior walls fixed with the necessary wooden/ ply boxing with hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ). Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden/ ply boxing with hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray. Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Object: Clock exhibit as per given .,

Name of the Exhibits : Space Age and Planetary Colonies: What the exhibit says about : Opening up new vistas and poss1bilities of establishing new colonies in different planets., Mode of communication : Panels and multimedia., Exhibit Type : Multimedia, Multimedia hardware requirements and Desired size : LED display: 65" LED LED Display Panel, Audio : Voiceover Minimum 2 languages and subtitles, Data point/ Internet point/ Electrical point : Data+ Electrical, Overall size of display and Exhibit : Overall size: 4' x 2' Graphic Panel Size: 4' L x 8' H , Multimedia Content/ Software : A 30 sec short film that imagines the future of human exploration and settlement beyond Earth. It explores the potential for colonizing other planets—such as Mars and the Moon—as humanity advances in space technology. The film covers the challenges and innovations required for creating sustainable colonies in space, including life support systems, habitation modules, resource mining, and energy production. It highlights the importance of interplanetary transportation and the advancements in robotics and artificial intelligence that will make these colonies possible., ELV : 65" Display Technology IPS/ VA , 3840x2160 (HD) , Brightness 350/500Nits abd Above , Contrast Ration : 4000:1 , 3 HDMI , 1 RJ45, RS232, 2-USB ,Antiglare Display , Builtin Wifi , Built in Browser , Smart- Screen Mirrioing , Play Via URL , Auto Wakeup , USB Play Video / Audio, Security- USB, Wifi, and Remote Lock , Speaker 20W (10Wx2) , Power Cable OS- TIzen / Web OS, RDP mode(Remote Desktop Protocol. , Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 1200mm x 2400mm mounted on gallery interior walls fixed with the necessary wooden/ ply boxing with hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ). Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden/ ply boxing with hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray. Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Standy : Pedestal/base structure In Acrylic with floor levellers and removable frame with mirror screws. The pedestal/exhibit to be grouted to the floor wherever necessary basis the load and stability of the exhibit and related interactions. Complete in all respects. Refer to typical details drawings of screen mounting and pedestals.,

Name of the Exhibits : Searching for friends in space?: What the exhibit says about : What is at the end: meeting with other intelligent civilisation or something else?, Mode of communication : Panels and multimedia., Exhibit Type : Multimedia, Multimedia hardware requirements and Desired size : LED display: 65" LED LED Display Panel, Audio : Voiceover Minimum 2 languages and subtitles, Data point/ Internet point/ Electrical point : Data+ Electrical, Overall size of display and Exhibit : Overall size: 4' x 2' Graphic Panel Size: 4' L x 8' H , Multimedia Content/ Software : Opening Scene (5 seconds): A lone astronaut, Ava, floats in a sleek spacecraft. She stares at a holographic map of the galaxy with blinking dots marking "uninhabited worlds." The ship's AI voice calmly announces, "All known lifeforms... still unresponsive." Mid Scene (15 seconds): Ava sighs and records a message: "To anyone out there, I'm Ava. I’ve crossed light-years hoping to connect. If you're listening, send a sign." She releases a glowing pod into space, watching it drift away. Suddenly, a flicker of light illuminates her cockpit. A bizarre, luminescent alien face appears on the screen, smiling. It waves. Closing Scene (10 seconds): Ava beams, overwhelmed. The alien sends a series of symbols, which Ava translates into a single word on her screen: "Friend?" She grins and whispers, "Finally, I'm not alone." Fade to Black. Text on Screen: "Connection is universal. Keep searching.", ELV : 65" Display Technology IPS/ VA , 3840x2160 (HD) , Brightness 350/500Nits abd Above , Contrast Ration : 4000:1 , 3 HDMI , 1 RJ45, RS232, 2-USB ,Antiglare Display , Builtin Wifi , Built in Browser , Smart- Screen Mirrioing , Play Via URL , Auto Wakeup , USB Play Video / Audio, Security- USB, Wifi, and Remote Lock , Speaker 20W (10Wx2) , Power Cable OS- TIzen / Web OS, RDP mode(Remote Desktop Protocol. , Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 1200mm x 2400mm mounted on gallery interior walls fixed with the necessary wooden/ ply boxing with hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ). Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden/ ply boxing with hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray. Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : N/A,

Name of the Exhibits : Quiz group game: What the exhibit says about : Quiz related to exhibits displayed, Mode of communication : Two touch screen installed where two groups can play the game simultaneously. Game will have a question bank of total 50 questions related to the gallary. Winner will be announced on the wall display., Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : 55" LED touch Display, Audio : N/A, Data point/ Internet point/ Electrical point : Data+ Electrical, Overall size of display and Exhibit : Overall size: 10' x 10', Multimedia Content/ Software : Application to be developed for the required interaction including UI, application development and programming. Should be in minimum 2 languages. Application should have FHD images/ videos. To be approved by Authority and DTA., ELV : 400 NIts UHD(3840x2160) Integrated Capacitive Touch, 2xHDMI,DVI, DP,USBx2, LAN, 8 GB Internal Memory, Magic Infolite Software, Speakers, Wifi , Built in Browser , Smart- Screen Mirrioing , Play Via URL , Auto Wakeup , USB Play Video / Audio, Security- USB, Wifi, and Remote Lock , Speaker 20W (10Wx2) , Power Cable OS- TIzen / Web OS, RDP mode(Remote Desktop Protocol. , Info display/Signage : N/A, Material Treatment and Finishes : Counter (450-600 L x 1200-1500 W x 300-450 H_Qty 2) : As per required shape and size counter made from 8mm MR plywood with necessary wooden/MS framing finished with 6mm thk corian finished on top and facia bottom 1.2 mm th laminate .Counter support to be grouted to the floor wherever necessary basis the load and stability of the exhibit and related interaction. (Shape and size will be differ as per exhibit requirement during executions.),

Name of the Exhibits : Let's travel through our solar system and land on Mars!: What the exhibit says about : Ride to Our Solar System and landing on Mars, Mode of communication : Simulator Ride (Ride is Retained, Ambiance to be revised), Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : Existing Screen, Audio : Voiceover Minimum 2 languages and subtitles, Data point/ Internet point/ Electrical point : Data+ Electrical, Overall size of display and Exhibit : Overall size: 30' x 30' Graphic Panel Size: 4' L x 8' H, Multimedia Content/ Software : 1. Mars Landing (5 min) The First Step, riders embark on an exhilarating journey as part of humanity's historic mission to Mars. The adventure begins with a dramatic launch from Earth, followed by a high-speed journey through space. As the spacecraft approaches Mars, tension builds, culminating in a thrilling descent through the planet’s atmosphere, filled with turbulence and the fear of unknown challenges. The final moments are a pulse-pounding landing on the Martian surface, where the crew steps out into the vast, red landscape to establish the first human presence on another planet. The movie combines stunning visuals, immersive motion, and realistic sound to make riders feel as if they are part of this groundbreaking mission, witnessing history as humanity takes its first steps on Mars. 2. Moon Landing (5 min) A Giant Leap, riders experience the thrilling journey of humanity’s first mission to the Moon. The adventure begins with a powerful rocket launch from Earth, followed by a breathtaking journey through space. As the spacecraft nears the Moon, tension builds as the crew prepares for the perilous descent. The ride simulates the exhilarating and nerve-wracking moments of landing on the lunar surface, with vivid visuals of the Moon’s cratered landscape and Earth rising in the sky above. Once the spacecraft touches down, riders feel the weightlessness of the Moon’s low gravity as they witness astronauts stepping onto the lunar surface for the first time, planting the iconic flag, and collecting samples. With stunning visuals, realistic motion effects, and immersive sound, Moon Landing: A Giant Leap lets passengers feel like they’re part of one of humanity’s greatest achievements., ELV : N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 1200mm x 2400mm mounted on gallery interior walls fixed with the necessary wooden/ ply boxing with hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ). Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden/ ply boxing with hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray. Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Renovation of existing space, Implementation of two new films for the ride and its synchronization with the hydraulic system.,

Name of the Exhibits : What does a sunset look like on Mars?: What the exhibit says about : On Mars, sunsets appear more blueish and pinkish due to the thin atmosphere and dust scattering sunlight. The Sun looks smaller and the sunset lasts longer compared to Earth., Mode of communication : Backlit wall panel, Exhibit Type : Static, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/ Internet point/ Electrical point : N/A, Overall size of display and Exhibit : Wall paper should cover the whole Mars land area, Multimedia Content/ Software : N/A, ELV : N/A, Info display/Signage : N/A, Material Treatment and Finishes : Retained and refurbished,

Name of the Exhibits : Charting a Route to Mars: What the exhibit says about : How to reach there, Mode of communication : A Panel Exhibit and film (Repaired), Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/ Internet point/ Electrical point : N/A, Overall size of display and Exhibit : , Multimedia Content/ Software : N/A, ELV : N/A, Info display/Signage : N/A, Material Treatment and Finishes : Retained and refurbished,

Name of the Exhibits : Mars Exhibition Capsule: What the exhibit says about : All existing Exhibits inside the Mars Exhibition Capsule with information about mars and survival on it. Exhibits need to be repaired, refurbished and reinstalled with updated information., Mode of communication : Interactive models and graphical panels (Repaired and Refurbished) , Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/ Internet point/ Electrical point : N/A, Overall size of display and Exhibit : , Multimedia Content/ Software : N/A, ELV : N/A, Info display/Signage : N/A, Material Treatment and Finishes : Retained and refurbished,

Name of the Exhibits : Mission to Mars: What the exhibit says about : Mangalyaan, Downscaled model shows India's first interplanetary mission, was launched by ISRO on November 5, 2013. It made India the first Asian country to reach Mars orbit., Mode of communication : Downscaled model shows India's first interplanetary mission, Exhibit Type : Static, Multimedia hardware requirements and Desired size : N/A, Audio : Ambiant Audio Minimum 2 languages and subtitles, Data point/ Internet point/ Electrical point : Data+Electrical, Overall size of display and Exhibit : Model Size: 4' W x Pro. H, Multimedia Content/ Software : N/A, ELV : N/A, Info display/Signage : N/A, Material Treatment and Finishes : Components: Replica: Detailed model Support Structure: Sturdy framework to hold the replica securely. Informational Panels: Displays with information Materials: Replica: High-grade plastic or metal for realistic detailing and durability. Support Structure: Stainless steel or reinforced aluminum for stability. Informational Panels: High-Pressure Laminate (HPL) or acrylic panels for durability and high-definition printing. Features: Realistic Design: Accurate representation, design and features. Educational Information: Panels provide detailed information.,

Name of the Exhibits : Tributes to Scientific Achievement: What the exhibit says about : Existing Handprints of Noble Indentities to be retained and mode of display to be revised, Mode of communication : Handprints hanged on the wall in enclosed glass box with infographic panels. (Refurbished), Exhibit Type : Static, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/ Internet point/ Electrical point : N/A, Overall size of display and Exhibit : Graphic Panel Size: 4' L x 8' H, Multimedia Content/ Software : N/A, ELV : N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 1200mm x 2400mm mounted on gallery interior walls fixed with the necessary wooden/ ply boxing with hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ). Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden/ ply boxing with hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray. Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Niche (2000 L x 200 D x 2100 H) :Partition made of 19 mm thk ply with required wooden and GI frame work finished with 1 mm thk laminate as required and depth 150mm to 200mm and height upto 3.0 mtwith edge finish of matching PVC edge with required size and provision of profile light on the edges and spot light on topwith wherever required toughened glass shutter with required accessories and hardware etc. complete. (Shape and size will be differ as per exhibit requirement during executions.) Object : Existing Handprints,

Science Gallery Map: Map of the Gallery, Model of Hall of space with Graphic Panel, Exhibit Type: Static,

Mathematics: Name of the Exhibits: Why wheels are always round?: What the exhibit says about: Square wheeled cycle traversing smoothly on the curve surface., Mode of communication: Working exhibit with informative backlit panel, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/Internet point/Electrical point: N/A, Multimedia Content/ Software: N/A, Overall size of display and Exhibit: Overall size: 16' x 16' or 16' Dia, ELV: N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ).Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray.Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Standy: Pedestal/base structure In Acrylic with floor levellers and removable frame with mirror screws. The pedestal/exhibit to be grouted to the floor wherever necessary basis the load and stability of the exhibit and related interactions. Complete in all respects. Refer to typical details drawings of screen mounting and pedestals. Track: Reinforced concrete base (4–6 inches thick) topped with non-slip rubberized flooring for safety and durability. The surface features precise inverted catenary curves, matching the squared wheel’s geometry. Squared Wheels: Lightweight aluminum or steel frames with rubberized edges for smooth motion and durability. Each wheel has a side length of 1.5–2 feet. Cycle Frame: Steel or aluminum alloy, sturdy and balanced for user safety, with comfortable seating and handlebars. Supporting Base: Steel framework ensures the exhibit remains stable and secure during use.,

Mathematics: Name of the Exhibits: Name of the Exhibits: What’s the math behind pressure?: What the exhibit says about: Press against the surface full of pins to create a profile., Mode of communication: Working exhibit with informative backlit panel, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/Internet point/Electrical point: N/A, Multimedia Content/ Software: N/A, Overall size of display and Exhibit: Overall size: 8' (H) x 6' (L), ELV: N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ).Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray.Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Standy: Pedestal/base structure In Acrylic with floor levellers and removable frame with mirror screws. The pedestal/exhibit to be grouted to the floor wherever necessary basis the load and stability of the exhibit and related interactions. Complete in all respects. Refer to typical details drawings of screen mounting and pedestals. Frame: Powder-coated steel or aluminum for a sturdy, durable structure. Pins: Lightweight, smooth stainless steel or aluminum rods (diameter: 6–8 mm, length: 5–6 inches) for easy movement and rust resistance. Pin Support Grid: High-density polycarbonate or acrylic sheet with evenly spaced holes for precise pin alignment and smooth operation. Base and Mounting: Heavy-duty steel base with anti-slip feet for stability. Wall-mounted option available for secure installation. Protective Features: Transparent polycarbonate cover on the back and sides to prevent pin displacement while ensuring visibility., : What the exhibit says about: Press against the surface full of pins to create a profile., Mode of communication: Working exhibit with informative backlit panel, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/Internet point/Electrical point: N/A, Multimedia Content/ Software: N/A, Overall size of display and Exhibit: Overall size: 8' (H) x 6' (L), ELV: N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ).Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray.Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Standy: Pedestal/base structure In Acrylic with floor levellers and removable frame with mirror screws. The pedestal/exhibit to be grouted to the floor wherever necessary basis the load and stability of the exhibit and related interactions. Complete in all respects. Refer to typical details drawings of screen mounting and pedestals. Frame: Powder-coated steel or aluminum for a sturdy, durable structure. Pins: Lightweight, smooth stainless steel or aluminum rods (diameter: 6–8 mm, length: 5–6 inches) for easy movement and rust resistance. Pin Support Grid: High-density polycarbonate or acrylic sheet with evenly spaced holes for precise pin alignment and smooth operation. Base and Mounting: Heavy-duty steel base with anti-slip feet for stability. Wall-mounted option available for secure installation. Protective Features: Transparent polycarbonate cover on the back and sides to prevent pin displacement while ensuring visibility.,

Name of the Exhibits: Can shape effect the speed?: What the exhibit says about: Adjust the track and find the fastest path down to the bottom., Mode of communication: Working exhibit with informative backlit panel, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/Internet point/Electrical point: N/A, Multimedia Content/ Software: N/A, Overall size of display and Exhibit: Overall size: 4' (L) x 3' (H), ELV: N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ).Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray.Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Base (1.3 sqmt): Required shape and size stage with fabrication work for levelling of stage ht up to150-300 mm as per exhibit requirment finished with structure ply and Vinyl / Laminate flooring material finish. Facia finish with wooden beading matching with paint including concealed LED lighting etc complete . (Refer BOQ No. 7.11) Shape and size will differ according to Exhibit Requiremnt during excecution. Standy: Pedestal/base structure In Acrylic with floor levellers and removable frame with mirror screws. The pedestal/exhibit to be grouted to the floor wherever necessary basis the load and stability of the exhibit and related interactions. Complete in all respects. Refer to typical details drawings of screen mounting and pedestals. Frame: Powder-coated steel or aluminum for a sturdy and rust-resistant structure. Tracks: Smooth, high-density polycarbonate or aluminum rails, precision-machined for minimal friction, with adjustable angles for different inclines. Balls: Stainless steel or acrylic spheres (diameter: 1–2 inches) for consistent rolling behavior. Base: Heavy-duty steel or wood with anti-slip feet for stability and durability. Markings: Laser-engraved distance markers on the tracks for accurate observation of motion. Other Features: Digital timer or sensors to measure time and speed for enhanced educational engagement.,

Name of the Exhibits: Conic Section: What the exhibit says about: Involves the shapes created by slicing a double cone with a plane. , Mode of communication: Working exhibit with informative backlit panel, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/Internet point/Electrical point: N/A, Multimedia Content/ Software: N/A, Overall size of display and Exhibit: Overall size: 3' (L) x 3' (H) Cone size: 12inch dia, ELV: N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden / ply with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ). Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden / ply with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray. Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Cone: Acrylic or high-density polycarbonate with a diameter of 8 inches and height of 12 inches, clear for visibility and precision-crafted for accuracy. Cutting Plane: Adjustable, transparent polycarbonate or aluminum sheet to simulate different angles of intersection. Frame: Powder-coated steel or aluminum for durability and support. Rotational Mechanism: Manual or motorized system for rotating the cone, allowing users to explore multiple sections.,

Name of the Exhibits: Understand the concept of Probability: What the exhibit says about: The theory of probabilities is nothing more than good sense confirmed by calculation., Mode of communication: Working exhibit with informative backlit panel, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/Internet point/Electrical point: N/A, Multimedia Content/ Software: N/A, Overall size of display and Exhibit: Overall size: 4' (L) x 6' (H), ELV: N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ).Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray.Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Standy: Pedestal/base structure In Acrylic with floor levellers and removable frame with mirror screws. The pedestal/exhibit to be grouted to the floor wherever necessary basis the load and stability of the exhibit and related interactions. Complete in all respects. Refer to typical details drawings of screen mounting and pedestals. Board Frame: Powder-coated steel or aluminum for stability and durability. Peg Board: Transparent acrylic or polycarbonate sheet with evenly spaced stainless steel or aluminum pegs (diameter: 6–8 mm). Balls: Lightweight acrylic or plastic balls (diameter: 10–15 mm) for smooth motion. Bins: High-density plastic or aluminum collection bins at the base, labeled for statistical interpretation. Protective Cover: Transparent 12mm acrylic shield to prevent ball spillage while ensuring visibility.,

Name of the Exhibits: What is ellipse?(Upgraded: What the exhibit says about: If the inside of an ellipse is a mirror, any light ray leaving one focus will always pass through the other., Mode of communication: Working exhibit with informative backlit panel, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/Internet point/Electrical point: N/A, Multimedia Content/ Software: N/A, Overall size of display and Exhibit: Overall size: 4' (L) x 4' (W), ELV: N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ).Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray.Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Base (1.8 sqmt): Required shape and size stage with fabrication work for levelling of stage ht up to150-300 mm as per exhibit requirment finished with structure ply and Vinyl / Laminate flooring material finish. Facia finish with wooden beading matching with paint including concealed LED lighting etc complete . (Refer BOQ No. 7.11) Shape and size will differ according to Exhibit Requiremnt during excecution. Standy: Pedestal/base structure In Acrylic with floor levellers and removable frame with mirror screws. The pedestal/exhibit to be grouted to the floor wherever necessary basis the load and stability of the exhibit and related interactions. Complete in all respects. Refer to typical details drawings of screen mounting and pedestals. Reflective Walls: Polished stainless steel or acrylic mirrors, shaped into a precise elliptical curve for accurate reflections. Focal Markers: Brass or aluminum points, clearly labeled, securely mounted at the ellipse's focal points. Laser Pointers: Low-power, battery-operated lasers with adjustable mounts to demonstrate the reflection paths. Protective Shield: Transparent polycarbonate or acrylic cover for safety during operation. Surface Markings: Engraved or printed grid and ellipse outline for visual clarity.,

Name of the Exhibits: Mobius Curve / Twisted Thruway: What the exhibit says about: Get behind the wheel and enjoy a “driver’s eye” view while exploring the surfaces of a Möbius strip and a trefoil knot., Mode of communication: Working exhibit with informative backlit panel, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/Internet point/Electrical point: Electrical Point, Multimedia Content/ Software: N/A, Overall size of display and Exhibit: Overall size: 7' (L) x 5' (W), ELV: N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ).Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray.Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Base (1.8 sqmt): Required shape and size stage with fabrication work for levelling of stage ht up to150-300 mm as per exhibit requirment finished with structure ply and Vinyl / Laminate flooring material finish. Facia finish with wooden beading matching with paint including concealed LED lighting etc complete . (Refer BOQ No. 7.11) Shape and size will differ according to Exhibit Requiremnt during excecution. Standy: Pedestal/base structure In Acrylic with floor levellers and removable frame with mirror screws. The pedestal/exhibit to be grouted to the floor wherever necessary basis the load and stability of the exhibit and related interactions. Complete in all respects. Refer to typical details drawings of screen mounting and pedestals. Möbius Track: High-density polycarbonate or aluminum strip, 6–8 inches wide, bent and joined into a precise Möbius loop with a smooth, durable surface. Car: Compact plastic or aluminum vehicle with rubberized wheels, guided by a fixed groove or rail on the track to ensure it follows a single path. Track Rail: Embedded or raised steel or polycarbonate rail, keeping the car aligned and preventing it from falling. Control System: Push-button switch connected to a DC motor that propels the car in one direction. Frame: Sturdy powder-coated steel or aluminum structure supporting the track. Power Source: Battery-operated or low-voltage DC power supply for safe and efficient operation.,

Mechanics: Name of the Exhibits: Maxwell's Wheel: What the exhibit says about: The Maxwell Wheel demonstrates conservation of mechanical energy. As it falls the wheel releases kinetic energy; when it reaches the bottom the kinetic energy changes to potential energy and it rolls back up again .over and over again until all the energy is lost to friction, Mode of communication: Working exhibit with informative backlit panel, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/Internet point/Electrical point: N/A, Multimedia Content/ Software: N/A, Overall size of display and Exhibit: Overall size: 2' (L) x 4' (H), ELV: N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden / ply with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ). Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden / ply with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray. Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Wheel: High-strength aluminum or steel disc (12–18 inches diameter) with smooth edges and evenly distributed weight for balanced motion. Axle: Stainless steel rod (0.5–1 inch diameter) with precision machining for minimal friction. String: Durable nylon or braided steel cable, securely attached to the axle. Frame: Powder-coated steel or aluminum structure with vertical supports for stability and durability. Mounting Bearings: High-precision ball bearings at the axle mounts for smooth rotation. Markings: Laser-etched scale on the frame to measure the wheel’s descent and ascent. Safety Features: Rounded edges on the frame and covered mounts to ensure user safety.,

Name of the Exhibits: Center of Gravity: What the exhibit says about: It is travelling from the lower end to the higher end. The potential energy is increasing. At the same time, it is also gaining kinetic energy since it is moving. , Mode of communication: Working exhibit with informative backlit panel, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/Internet point/Electrical point: N/A, Multimedia Content/ Software: N/A, Overall size of display and Exhibit: Overall size: 4' (L) x 2' (W), ELV: N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden / ply with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ). Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden / ply with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray.Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Table - 1 (1000-1200mm L x 1000-1200mm Bx7500mm H) : Table as per required size made up 12mm MR plywood with necessary wooden/MS framing finished with 1.2mm laminate and 6mm thk corian cladding facia required sizes with floor levellers. The pedestal/exhibit to be grouted to the floor wherever necessary basis the load and stability of the exhibit and related interactions .Shape and size will differ as per exibit requirement during excecution. Wooden Track: Made of high-quality, smooth-finished hardwood (such as maple or oak), carefully shaped to create a non-level incline. The track is coated with a clear varnish for durability and ease of movement. Double Cone: Crafted from hardwood or smooth, polished acrylic, with precise cone shapes to allow objects to roll and interact with the track. Each cone has a consistent slope angle for demonstration purposes. Base: Sturdy, reinforced wooden base for secure installation and to prevent wobbling during operation. The base features anti-slip rubber feet to prevent unwanted movement. Rolling Objects: Small, smooth plastic or metal balls (approximately 1–2 inches in diameter) designed to roll smoothly up or down the track depending on the incline. Mounting Mechanism: Adjustable mounts or brackets to hold the track securely at varying angles for different demonstration scenarios. Visual Aids: Engraved or printed markers on the track to help users understand the principles of rolling motion and the effect of the incline on speed and acceleration.,

Name of the Exhibits: How breaking works?: What the exhibit says about: An eddy current brake, also known as an induction brake, electric brake or electric retarder, is a device used to slow or stop a moving object by generating eddy currents and thus dissipating its kinetic energy as heat., Mode of communication: Working exhibit with informative backlit panel, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/Internet point/Electrical point: Electrical , Multimedia Content/ Software: N/A, Overall size of display and Exhibit: Overall size: 2' (L) x 2' (W), ELV: N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden / ply with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ). Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden / ply with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray.Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Table - 1 (1000-1200mm L x 1000-1200mm Bx7500mm H) : Table as per required size made up 12mm MR plywood with necessary wooden/MS framing finished with 1.2mm laminate and 6mm thk corian cladding facia required sizes with floor levellers. The pedestal/exhibit to be grouted to the floor wherever necessary basis the load and stability of the exhibit and related interactions .Shape and size will differ as per exibit requirement during excecution. Brake Disk: Made from high-conductivity aluminum or copper, shaped into a disk (approximately 6–8 inches in diameter). The disk is precisely machined for smooth rotation. Magnetic Field: Neodymium or ferrite magnets are placed near the spinning disk to generate a changing magnetic field, inducing eddy currents. Frame: Steel or aluminum frame to securely hold the components, with adjustable mounting for magnets and the disk. Base: Wooden or metal base with anti-slip rubber feet to provide stability during demonstrations. Rotation Mechanism: A small DC motor or hand-operated wheel to spin the brake disk at variable speeds. Visual Indicators: LED lights or gauges to show the level of braking force applied, enhancing understanding of the energy dissipation process. Control System: Simple control interface to adjust motor speed and magnet placement for different braking effects.,

Name of the Exhibits: How simulation works?: What the exhibit says about: A Game which is simulated with the spin bike, you can control the game with the speed of pedaling., Mode of communication: Working exhibit with informative backlit panel, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : 65" LED Display Panel, Audio : Ambient audio, Data point/Internet point/Electrical point: Data+ Electrical Point, Multimedia Content/ Software: An interactive software game developped that sync with the cycle peddling., Overall size of display and Exhibit: Overall size: 3' (L) x 7' (H), ELV: Supply, Installation, Testing and Commissioning of 65 inch display 4K UHD(3840 X 2160) resolution Android LED display with built in 2.4 Ghz Wifi, 1.1 Ghz Built in Quad core processor, 2 GB DDR3 RAM, 16 GB Memory, built in Triple Core Mali 600 MHz GPU, with HDR 10, Dolby Audio, Built in Wifi and Cromecast, HDMI CEC, HDMI ARC, Built-in Bluetooth Ver.4, 20W built in speakers, HDMI 2.0 X 3, AV X 1, USB 2.0 X 1, RJ45 X 1(network connectivity only), Headphone Out x 1, SPDIF Out x 1SCREEN SIZE 139.7 cm, PANEL TECHNOLOGY IPS PANEL, D-LED, ASPECT RATIO 16:9 RESOLUTION (3840*2160)UHD, BRIGHTNESS 400 Nits VIEWING ANGLE 178, RESPONSE TIME 8ms CONTRAST RATIO 1200:1 OPERATION HOURS 24 / 7, CONNECTION TERMINAL RF IN 1 AV IN 1 mini *Side USB INPUT (2.0 SUPPORT) USB 2.0x1; USB 3.0x1 HDMI INPUT 3 HDCP 2.2 Yes SPDIF OUT YES,optical, RJ-45 1 USB DEVICE SUPPORT USB Supported HDD SUPPORTED FORMATS, MAIN FEATURES HOTEL MODE Yes, Basic CEC Yes, DOLBY AUDIO Yes HDR10 Yes, HDR10/HLG BLUETOOTH Yes INTERNET LINK Yes, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden / ply with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ).Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden / ply with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray.Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Base (2.4 sqmt): Required shape and size stage with fabrication work for levelling of stage ht up to150-300 mm as per exhibit requirment finished with structure ply and Vinyl / Laminate flooring material finish. Facia finish with wooden beading matching with paint including concealed LED lighting etc complete . (Refer BOQ No. 7.11) Shape and size will differ according to Exhibit Requiremnt during excecution. Frame: High-durability, child-safe plastic with smooth edges and a colorful, kid-friendly design. The bike frame is designed for stability and lightweight movement. Pedals: Non-slip plastic pedals with adjustable straps to fit various foot sizes, designed for secure cycling. Handlebars: Ergonomically designed plastic handlebars with foam grips for comfort and safety during use. Interactive Screen: A built-in 7–10 inch LCD screen (mounted at a child’s eye level), connected to the game system. The screen displays game content that corresponds to the pedaling motion. Gaming Console: Integrated in the frame, the console connects the bike to educational and fitness-based games via a simple user interface. Power Source: Battery-operated (rechargeable or AA batteries) with a low-voltage DC power supply for safety. Base: Reinforced base with rubberized feet to ensure stability and prevent movement during use. Safety Features: Rounded edges, low-profile design, and adjustable resistance to control the level of difficulty in the game and cycling effort.,

Name of the Exhibits: Can you lift yourself?(Upgraded): What the exhibit says about: Sit on a chair, pull the pulley which is attached with the chair with the attached combination of gears. Gears make it easier to lift your own weight., Mode of communication: Working exhibit with informative backlit panel, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/Internet point/Electrical point: N/A, Multimedia Content/ Software: N/A, Overall size of display and Exhibit: Overall size: 8' (L) x 7' (H), ELV: N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ).Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray.Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Base (2.9 sqmt): Required shape and size stage with fabrication work for levelling of stage ht up to150-300 mm as per exhibit requirment finished with structure ply and Vinyl / Laminate flooring material finish. Facia finish with wooden beading matching with paint including concealed LED lighting etc complete . (Refer BOQ No. 7.11) Shape and size will differ according to Exhibit Requiremnt during excecution. Chairs: Three sturdy steel-framed chairs with cushioned seats and backs for comfort and durability. Each chair is securely mounted on the frame for safety. Gears: Three gear systems—direct pull, single gear (1:1 ratio), and compound gear system (mechanical advantage of 2:1 or higher). Made of high-strength, corrosion-resistant steel or reinforced polycarbonate. Pull Ropes: Nylon or polyester ropes with a smooth, durable finish, connected to the gears and chairs. Handles are ergonomically designed for a comfortable grip. Frame: Heavy-duty steel or aluminum frame to securely hold the chairs, gear systems, and ropes in place. Powder-coated for corrosion resistance. Base: A wide, reinforced base with non-slip rubber feet for stability during operation. Visual Markers: Color-coded indicators to explain the type of gear mechanism and the force applied at each station. Safety Features: Locking mechanisms to prevent chairs from sliding uncontrollably, padded stops to cushion descent, and clear usage instructions displayed prominently.,

Name of the Exhibits: How Clock works?: What the exhibit says about: It teaches: cause and effect, fine motor and manipulative skills, problem-solving, colors and patterns, and principles of motion! , Mode of communication: Working exhibit with informative backlit panel, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/Internet point/Electrical point: Data+ Electrical Point, Multimedia Content/ Software: N/A, Overall size of display and Exhibit: Overall size: 2' (L) x 2' (H), ELV: N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden / ply with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ). Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden / ply with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray.Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Standy : Pedestal/base structure In Acrylic with floor levellers and removable frame with mirror screws. The pedestal/exhibit to be grouted to the floor wherever necessary basis the load and stability of the exhibit and related interactions. Complete in all respects. Refer to typical details drawings of screen mounting and pedestals. Frame: Transparent acrylic or polycarbonate case for visibility, ensuring durability and user safety. Gears: High-strength plastic or brass gears of various sizes, precisely machined to replicate the clock’s escapement and motion works. Escapement Mechanism: Includes a pallet fork and escape wheel made of polished steel for accurate movement. Pendulum: Lightweight metal or wooden rod with a small weight at the bottom to demonstrate oscillatory motion. Hands: Aluminum or plastic clock hands mounted on a central axis, controlled by the gear system to display time. Base: Sturdy wooden or metal base with anti-slip feet, designed to securely support the exhibit. Drive System: Manual winding mechanism or small DC motor to operate the gear system. Educational Panel: An adjacent display with diagrams and explanations of how the components work together to measure time. Safety Features: Smooth edges, enclosed moving parts, and a clear guide to ensure safe interaction.,

Name of the Exhibits: Perpetual Motion Gravity Wheel Is Energy free?: What the exhibit says about: Bhāskara's wheel was a hypothetical perpetual-motion machine design created around 1150 CE by the Indian mathematician Bhāskara II. The wheel consisted of curved or tilted spokes partially filled with mercury. Once in motion, the mercury would flow from one side of the spoke to another, thus forcing the wheel to continue motion, in constant dynamic equilibrium. Although this can never happen defying the 1st law of design, but this craze for perpetual motion machine during mediaval Europe, led to next stage of industrial revolution. Here the wheel is driven through a hidden source of energy., Mode of communication: Working exhibit with informative backlit panel, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/Internet point/Electrical point: N/A, Multimedia Content/ Software: N/A, Overall size of display and Exhibit: Overall size: 4' (L) x 4' (H), ELV: N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden / ply with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ).Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden / ply with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray.Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Table - 1 (1000-1200mm L x 1000-1200mm Bx7500mm H) : Table as per required size made up 12mm MR plywood with necessary wooden/MS framing finished with 1.2mm laminate and 6mm thk corian cladding facia required sizes with floor levellers. The pedestal/exhibit to be grouted to the floor wherever necessary basis the load and stability of the exhibit and related interactions .Shape and size will differ as per exibit requirement during excecution. Object: The Bhaskara's Wheel, designed to illustrate concepts of rotational mechanics and energy conservation, is a circular structure made from lightweight yet sturdy materials like aluminum or acrylic, measuring approximately 0.6 meters in diameter. The wheel features evenly spaced cavities filled with steel balls or liquid-filled capsules, each weighing 100–300 grams, creating an imbalance to simulate perpetual motion. The wheel rotates on a steel axle, mounted with high-precision ball bearings to minimize friction, and is supported by a robust steel or wooden base with anti-slip rubber feet for stability. A clear acrylic cover encases the setup for safety while maintaining visibility, and an LED light enhances the display.,

Name of the Exhibits: What’s theory of Chaos?: What the exhibit says about: The exhibit is based on the theory of Chaos. 3 bar pendulums are free to rotate 360 degree around their pivot points at the end of 3 arms TEEE at rightangle to each other. The central knob can rotate the 3 arm rigid body system. When rotated, the pendulums swings following the law of chaos., Mode of communication: Working exhibit with informative backlit panel, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/Internet point/Electrical point: N/A, Multimedia Content/ Software: N/A, Overall size of display and Exhibit: Overall size: 4' (L) x 3' (W), ELV: N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ).Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray.Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Standy : Pedestal/base structure In Acrylic with floor levellers and removable frame with mirror screws. The pedestal/exhibit to be grouted to the floor wherever necessary basis the load and stability of the exhibit and related interactions. Complete in all respects. Refer to typical details drawings of screen mounting and pedestals. Object: Chaotic Pendulum contains a deceptively simple set of pendulums in a steel and Plexiglas case. A central, T-shaped bar supports three bearing-mounted bars from its ends. The “T” is itself bearing mounted at the intersection of the upright and the cross arm. The visitor gives an initial twist to the pendulums with a protruding knob. Intuition says that the resulting motion of this system should be, if not simple, at least predictable. Intuition, however, does not work with this device since its motion is chaotic, extremely complicated and long-lived.,

Name of the Exhibits: What are Waves?: What the exhibit says about: Waves are everywhere. They break on the shore of the ocean, bring music to your ears, and carry the signal of your favorite radio station. By attaching a string to two small electric motors rotating in the same direction, you can create and play with a special class of waves called standing waves., Mode of communication: Working exhibit with informative backlit panel, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : , Audio : , Data point/Internet point/Electrical point: Data+ Electrical Point, Multimedia Content/ Software: , Overall size of display and Exhibit: Overall size: 3' (L) x 2' (H), ELV: N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden / ply with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ).Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden / ply with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray.Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Table - 1 (1000-1200mm L x 1000-1200mm Bx7500mm H) : Table as per required size made up 12mm MR plywood with necessary wooden/MS framing finished with 1.2mm laminate and 6mm thk corian cladding facia required sizes with floor levellers. The pedestal/exhibit to be grouted to the floor wherever necessary basis the load and stability of the exhibit and related interactions .Shape and size will differ as per exibit requirement during excecution. Frame: Durable metal or acrylic frame to securely hold the rope and motor mechanism. Rope: High-tensile nylon or polyester rope, approximately 10–15 mm in thickness, designed for flexibility and durability under continuous motion. Motor Mechanism: A variable-speed electric motor with a controller to adjust frequency and amplitude based on user input. User Interface: Simple control panel with knobs or buttons to allow users to set wave parameters such as speed, amplitude, and wave type (e.g., sine or square waves). Anchors: Fixed mounts or adjustable clamps to securely tie the rope on one side and facilitate tension adjustments. Visual Aids: Explanatory signage with diagrams and interactive prompts, illustrating wave properties like frequency, wavelength, and amplitude. Safety Features: Protective covers over the motor and control system, rounded edges, and clear instructions to ensure safe operation.,

Name of the Exhibits: What are sound waves?: What the exhibit says about: A Chladni plates exhibit demonstrates the fascinating patterns created by sound waves. Named after Ernst Chladni, a German physicist and musician, Chladni plates are flat metal plates covered with sand or a similar substance. When the plates are vibrated, usually by drawing a violin bow along their edge or using a frequency generator, the sand arranges itself into intricate patterns called Chladni figures. These patterns illustrate the standing wave patterns formed on the surface of the plate at different resonant frequencies., Mode of communication: Working exhibit with informative backlit panel, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/Internet point/Electrical point: N/A, Multimedia Content/ Software: N/A, Overall size of display and Exhibit: Overall size: 3' (L) x 3' (W), ELV: N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden / ply with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ).Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden / ply with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray.Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Table - 1 (900-750mm L x 900-750mm Bx7500mm H) : Table as per required size made up 12mm MR plywood with necessary wooden/MS framing finished with 1.2mm laminate and 6mm thk corian cladding facia required sizes with floor levellers. The pedestal/exhibit to be grouted to the floor wherever necessary basis the load and stability of the exhibit and related interactions .Shape and size will differ as per exibit requirement during excecution. Vibrating Mechanism: Piezoelectric or electromagnetic transducer to produce vibrations at varying frequencies, controlled via a user interface. Sand Tray: Thin aluminum or acrylic tray mounted on the vibrating base to hold fine sand, facilitating clear pattern formation. Enclosure: Transparent acrylic or polycarbonate casing to fully enclose the exhibit, ensuring safety while allowing a clear view of the sand patterns. User Interface: Control panel with adjustable knobs or buttons to set frequency and amplitude, enabling exploration of sound wave effects. Visual Aids: Labels and diagrams explaining wave properties like frequency and resonance, with examples of observed patterns. Lighting (Optional): LED lights inside the enclosure to highlight the sand patterns for better visibility. Safety Features: Rounded edges, enclosed moving parts, and ventilation slots to prevent overheating of the vibration mechanism.,

Name of the Exhibits: Frictionless Path: What the exhibit says about: Medium scale working model of hyper loop Taransperent Glass tube of 12' long and 9" dia in which Hyperloop car shall be placed. , Mode of communication: Working exhibit with informative backlit panel, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/Internet point/Electrical point: Data+ Electrical Point, Multimedia Content/ Software: N/A, Overall size of display and Exhibit: Overall size: 12' (L), 9" dia, ELV: N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden / ply with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ).Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden / ply with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray.Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Base (1.3 sqmt): Required shape and size stage with fabrication work for levelling of stage ht up to150-300 mm as per exhibit requirment finished with structure ply and Vinyl / Laminate flooring material finish. Facia finish with wooden beading matching with paint including concealed LED lighting etc complete . (Refer BOQ No. 7.11) Shape and size will differ according to Exhibit Requiremnt during excecution. Tube: Transparent acrylic or polycarbonate tube, 9 inches in diameter, allowing clear visibility of the internal capsule. Durable and airtight to simulate reduced pressure conditions. Capsule: Lightweight aluminum or plastic model, designed aerodynamically to move smoothly through the tube. Equipped with small magnets or levitation pads. Track: Embedded magnetic or electromagnetic track (e.g., neodymium magnets or linear motor system) to simulate magnetic levitation and propulsion. Vacuum Simulation: A low-powered vacuum pump to create a reduced-pressure environment inside the tube, mimicking Hyperloop conditions. Base: Steel or wooden base with anti-slip feet for stability, supporting the length of the exhibit. Power System: Low-voltage DC power supply for safe operation of the electromagnetic track and vacuum pump. Control Interface: Simple panel to start, stop, and adjust the capsule's speed and track magnet strength, allowing users to observe performance changes. Safety Features: Protective end caps on the tube, pressure monitors, and clear operational instructions to ensure safety. Educational Signage: Accompanying panels with visuals explaining Hyperloop technology, principles of magnetic levitation, and the benefits of high-speed transport.,

Energy: Name of the Exhibits: How Energy Generates?: What the exhibit says about: When the movement is done on the electricity generative floor, Generation score is indicated on the display., Mode of communication: Working exhibit with informative backlit panel, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : 65" LED Display Panel, Audio : N/A, Data point/Internet point/Electrical point: Data+ Electrical Point, Multimedia Content/ Software: A software that sync with energy floor and shows data like generated energy etc., Overall size of display and Exhibit: Overall size: 15' (L) x 8' (W), ELV: N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden / ply with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ).Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden / ply with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray.Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Base (13.3 sqmt): Required shape and size stage with fabrication work for levelling of stage ht up to150-300 mm as per exhibit requirment finished with structure ply and Vinyl / Laminate flooring material finish. Facia finish with wooden beading matching with paint including concealed LED lighting etc complete . (Refer BOQ No. 7.11) Shape and size will differ according to Exhibit Requiremnt during excecution. Floor Surface: Durable, non-slip, high-quality rubber or vinyl with integrated pressure sensors (e.g., piezoelectric or kinetic tiles) that convert user movement into electrical energy. The surface is designed to be responsive and safe for all users. Backlighting: Embedded LED strips along the perimeter or beneath the floor surface to create a backlit effect. The lighting adjusts dynamically based on energy levels generated by users, brightening as more energy is created. Energy Conversion Units: Piezoelectric or kinetic energy converters within the floor capture mechanical energy from users' steps, converting it into electrical energy that is then stored in rechargeable batteries or capacitors. Power Storage: Rechargeable batteries or supercapacitors to store the harvested energy for later use, such as powering the display screen or other exhibit features. Display Screen: A large LED or projection screen displays real-time data about the energy generated, including power per user step and cumulative energy totals. Interactive graphs and visualizations help explain the process and show how energy is used. Lighting and Power Utilization: The stored energy is used to power low-power devices like LED lights, small fans, or motors within the exhibit, demonstrating how movement can be converted into usable energy. Frame and Housing: Strong, corrosion-resistant metal frame (aluminum or steel) houses the energy-conversion components, ensuring durability and ease of maintenance. Safety Features: Low-voltage operation, grounded wiring systems, protective covers around electrical components, and clear signage to ensure safe interaction for all ages. Educational Signage: Informational panels and digital displays explaining the principles of kinetic energy, piezoelectricity, and sustainable power generation. These highlight the impact of human motion in energy production and the potential for renewable energy applications.,

Name of the Exhibits: Energy Efficiency: What the exhibit says about: Rotate the wheel to generate the energy and see which lamps last longer, Mode of communication: Working exhibit with informative backlit panel, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/Internet point/Electrical point: Data+ Electrical Point, Multimedia Content/ Software: , Overall size of display and Exhibit: Overall size: 3' (L) x 3' (W), ELV: N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden / ply with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ).Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden / ply with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray.Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Table - 1 (900-1200mm dia x7500mm H) : Table as per required size made up 12mm MR plywood with necessary wooden/MS framing finished with 1.2mm laminate and 6mm thk corian cladding facia required sizes with floor levellers. The pedestal/exhibit to be grouted to the floor wherever necessary basis the load and stability of the exhibit and related interactions .Shape and size will differ as per exibit requirement during excecution. Object: Exhibit as per the description/ reference image/ link to be placed.,

Name of the Exhibits: When air acts as an electricity conductor (Upgraded) : What the exhibit says about: jacob's ladder This exhibit illustrates principles of high-voltage electricity, ionization, and the behavior of electrical arcs in air. Mode of communication: Working exhibit with informative backlit panel, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/Internet point/Electrical point: Electrical Point, Multimedia Content/ Software: , Overall size of display and Exhibit: Overall size: 3' (L) x 3' (W), ELV: N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ).Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray.Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Table - 1 (900-1200mm dia x7500mm H) : Table as per required size made up 12mm MR plywood with necessary wooden/MS framing finished with 1.2mm laminate and 6mm thk corian cladding facia required sizes with floor levellers. The pedestal/exhibit to be grouted to the floor wherever necessary basis the load and stability of the exhibit and related interactions .Shape and size will differ as per exibit requirement during excecution. Object: Exhibit as per the description/ reference image/ link to be placed.,

Name of the Exhibits: Who was Nikola Tesla? (Upgraded) : What the exhibit says about: A guided exhibit and experiment with Tesla Ball and Tesla Coil is done. Existing equipments are to be retained in repaired. Seating to be replaced and arrangements to be revised., Mode of communication: Working exhibit with informative backlit panel, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : 85" LED Display, Audio : N/A, Data point/Internet point/Electrical point: Electrical Point, Multimedia Content/ Software: N/A, Overall size of display and Exhibit: , ELV: N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ).Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray.Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Base (22.0 sqmt): Required shape and size stage with fabrication work for levelling of stage ht up to150-300 mm as per exhibit requirment finished with structure ply and Vinyl / Laminate flooring material finish. Facia finish with wooden beading matching with paint including concealed LED lighting etc complete . (Refer BOQ No. 7.11) Shape and size will differ according to Exhibit Requiremnt during excecution. Object: Exhibit as per the description/ reference image/ link to be placed.,

Name of the Exhibits: What is Static Charge?: What the exhibit says about: Tesla Ball Visitors shall experience static charge by touching a tesla ball , Mode of communication: Working exhibit with informative backlit panel, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/Internet point/Electrical point: Electrical Point, Multimedia Content/ Software: N/A, Overall size of display and Exhibit: Overall size: 5' (L) x 5' (W) Sphere size: 1'-6", ELV: N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ).Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray.Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Base (5.4 sqmt): Required shape and size stage with fabrication work for levelling of stage ht up to150-300 mm as per exhibit requirment finished with structure ply and Vinyl / Laminate flooring material finish. Facia finish with wooden beading matching with paint including concealed LED lighting etc complete . (Refer BOQ No. 7.11) Shape and size will differ according to Exhibit Requiremnt during excecution. Object: Exhibit as per the description/ reference image/ link to be placed . ,

Name of the Exhibits: Gases help energy transfer(Retained): What the exhibit says about: Existing exhibit to be retained and repaired, Mode of communication: Working exhibit with informative backlit panel, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/Internet point/Electrical point: Electrical Point, Multimedia Content/ Software: N/A, Overall size of display and Exhibit: , ELV: N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ).Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray.Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Table - 1 (750-900mm dia x7500mm H) : Table as per required size made up 12mm MR plywood with necessary wooden/MS framing finished with 1.2mm laminate and 6mm thk corian cladding facia required sizes with floor levellers. The pedestal/exhibit to be grouted to the floor wherever necessary basis the load and stability of the exhibit and related interactions .Shape and size will differ as per exibit requirement during excecution. Object : Exhibit as per the description/ reference image/ link to be placed.,

Name of the Exhibits: Gases help energy transfer (Retained): What the exhibit says about: Existing exhibit to be retained and repaired, Mode of communication: Working exhibit with informative backlit panel, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/Internet point/Electrical point: Electrical Point, Multimedia Content/ Software: N/A, Overall size of display and Exhibit: , ELV: N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ).Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray.Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Base (15.0 sqmt): Required shape and size stage with fabrication work for levelling of stage ht up to150-300 mm as per exhibit requirment finished with structure ply and Vinyl / Laminate flooring material finish. Facia finish with wooden beading matching with paint including concealed LED lighting etc complete . (Refer BOQ No. 7.11) Shape and size will differ according to Exhibit Requiremnt during excecution. Object : Exhibit as per the description/ reference image/ link to be placed.,

Name of the Exhibits: Fuel It Up: What the exhibit says about: Inject different types of fuels in cars and see which fuel is Environment friendly and lasts longer , Mode of communication: Working exhibit with informative backlit panel, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : 55" LED Display panel, Audio : N/A, Data point/Internet point/Electrical point: Electrical Point, Multimedia Content/ Software: An animated video represents a car race and compares which car wins, a car with hydrogen fuel or electric fuel or petrolium. And carbon emmissions, average etc., Overall size of display and Exhibit: Overall size: 5' (L) x 5' (W), ELV: 55" Display Technology IPS/ VA , 3840x2160 (HD) , Brightness 350/500Nits abd Above , Contrast Ration : 4000:1 , 3 HDMI , 1 RJ45, RS232, 2-USB ,Antiglare Display , Builtin Wifi , Built in Browser , Smart- Screen Mirrioing , Play Via URL , Auto Wakeup , USB Play Video / Audio, Security- USB, Wifi, and Remote Lock , Speaker 20W (10Wx2) , Power Cable OS- TIzen / Web OS, RDP mode(Remote Desktop Protocol. , Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ).Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray.Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Car Models: Scalled Car models (2' W x 4' H) placed on a base, each corresponding to a different fuel type (electric, petroleum, hydrogen). The cars are durable plastic or lightweight metal with sensors to simulate race progression. Fuel Injectors: Interactive fuel input stations for each car, using buttons, sliders, or simulated pumps to "inject" fuel types. Fuel levels directly influence car performance and energy efficiency data. LED Display: High-resolution LED screen to display the car race, including distance traveled, energy consumed, and environmental impact scores for each fuel type. Interactive Software: A microcontroller-based system running educational software to process inputs, simulate fuel efficiency, and animate the car race in real-time. Base and Frame: A strong metal or wood base with a polished surface and durable acrylic or polycarbonate enclosure around mechanical parts. Power System: Low-voltage DC power supply to operate LED displays, sensors, and control mechanisms. Environmental Indicators: Digital meters or graphics on the screen show comparative metrics, such as CO₂ emissions, energy efficiency, and environmental impact, for each fuel type. User Interaction Interface: Push-button or touch-enabled control panel for users to start races and adjust fuel levels, with illuminated indicators for guidance. Safety Features: Rounded edges on all components to prevent injury. Shielded wiring and enclosures for electrical parts. Instructions and safety warnings prominently displayed. Educational Signage: Panels and infographics explaining the science of different fuel types, their environmental impact, and future energy sustainability.,

Name of the Exhibits: Chemical to Electric: What the exhibit says about: Moisten your hands with moist sponge and place both hands on Zinc and Copper plates. The meter indicated electricity generated through your body., Mode of communication: Working exhibit with informative backlit panel, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/Internet point/Electrical point: Electrical Point, Multimedia Content/ Software: N/A, Overall size of display and Exhibit: , ELV: N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ).Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray.Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Object: Existing exhibit to be repaired and refurbished.,

Name of the Exhibits: Production of Exho (Retained and Refurbished): What the exhibit says about: On pressing the red button and generating a sound from right hand side microphone, you can hear an echo from left hand side speaker. , Mode of communication: Working exhibit with informative backlit panel, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/Internet point/Electrical point: Electrical Point, Multimedia Content/ Software: N/A, Overall size of display and Exhibit: , ELV: N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ).Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray.Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Object: Existing exhibit to be repaired and refurbished.,

Name of the Exhibits: Solar to Electric (Retained and Refurbished): What the exhibit says about: Photo voltaic cells convert light energy to electrical energy. , Mode of communication: Working exhibit with informative backlit panel, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/Internet point/Electrical point: Electrical Point, Multimedia Content/ Software: N/A, Overall size of display and Exhibit: , ELV: N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ).Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray.Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Object : Existing exhibit to be repaired and refurbished,

Name of the Exhibits: Potential Energy to Kinetic Energy (Retained and Refurbished): What the exhibit says about: Electricity is the most convenient medium for transformation of energy from one form to the other. , Mode of communication: Working exhibit with informative backlit panel, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/Internet point/Electrical point: Electrical Point, Multimedia Content/ Software: N/A, Overall size of display and Exhibit: , ELV: N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ).Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray.Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Object : Existing exhibit to be repaired and refurbished,

Name of the Exhibits: Clap Box (Retained and Refurbished): What the exhibit says about: , Mode of communication: Working exhibit with informative backlit panel, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/Internet point/Electrical point: Electrical Point, Multimedia Content/ Software: N/A, Overall size of display and Exhibit: , ELV: N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ).Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray.Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Object : Existing exhibit to be repaired and refurbished,

Name of the Exhibits: Radiometer (Retained and Refurbished): What the exhibit says about: , Mode of communication: Working exhibit with informative backlit panel, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/Internet point/Electrical point: Electrical Point, Multimedia Content/ Software: N/A, Overall size of display and Exhibit: , ELV: N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ).Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray.Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Object : Existing exhibit to be repaired and refurbished,

Fluidics: Name of the Exhibits: Archemedes Screw: What the exhibit says about: Exhibit showcases a working replica of the ancient mechanical device, used to lift water from a lower level to a higher one. , Mode of communication: Working exhibit with informative backlit panel, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/Internet point/Electrical point: N/A, Multimedia Content/ Software: N/A, Overall size of display and Exhibit: Overall size: 8' (L) x 6' (H), ELV: N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ).Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray.Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Standy : Pedestal/base structure In Acrylic with floor levellers and removable frame with mirror screws. The pedestal/exhibit to be grouted to the floor wherever necessary basis the load and stability of the exhibit and related interactions. Complete in all respects. Refer to typical details drawings of screen mounting and pedestals. Screw: Made of durable, lightweight metal or hard plastic, with a spiral design to move small balls upwards efficiently. The screw is securely mounted on an axle for smooth rotation. Balls: Small, lightweight, and durable plastic or rubber balls, approximately 1-2 inches in diameter, used to simulate fluid motion. Bright colors for visibility and engagement. Casing: Transparent acrylic or polycarbonate tube encasing the screw, allowing users to observe the motion while preventing balls from falling out. Base and Frame: Sturdy aluminum or steel frame with anti-slip feet, ensuring stability and supporting the entire structure. The base includes a collection bin for the balls at the bottom. Rotation Mechanism: Hand crank or pedal system connected to the screw, allowing users to manually operate the exhibit and observe mechanical principles in action. Educational Signage: Panels with visuals and text explaining Archimedes’ principles, the history of the screw, and its applications in modern engineering and agriculture. Safety Features: Smooth edges and enclosed moving parts to ensure safety. Transparent casing to prevent contact with the screw. Material Finish: Powder-coated metal parts and polished acrylic surfaces for durability and an engaging aesthetic.,

Name of the Exhibits: Bernoulli's Ball: What the exhibit says about: Levitating on an invisible stream of air, a beach ball seems to defy gravity. If you try to pull the ball out, you can feel a force pulling it back in—the same force that keeps an airplane in flight., Mode of communication: Working exhibit with informative backlit panel, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/Internet point/Electrical point: Electrical Point, Multimedia Content/ Software: N/A, Overall size of display and Exhibit: Overall size: 4' (L) x 4' (W), ELV: N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ).Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray.Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Standy : Pedestal/base structure In Acrylic with floor levellers and removable frame with mirror screws. The pedestal/exhibit to be grouted to the floor wherever necessary basis the load and stability of the exhibit and related interactions. Complete in all respects. Refer to typical details drawings of screen mounting and pedestals. Table - 1 (900-1200mm dia x7500mm H) : Table as per required size made up 12mm MR plywood with necessary wooden/MS framing finished with 1.2mm laminate and 6mm thk corian cladding facia required sizes with floor levellers. The pedestal/exhibit to be grouted to the floor wherever necessary basis the load and stability of the exhibit and related interactions .Shape and size will differ as per exibit requirement during excecution. Air Blower: High-efficiency, low-noise electric fan capable of generating a consistent vertical airstream. The airflow strength is adjustable for interactivity. Ball: Lightweight foam or plastic ball, approximately 6-8 inches in diameter, chosen to optimize buoyancy and stability in the airflow. Air Column: Transparent acrylic or polycarbonate tube guiding the airstream and allowing clear visibility of the ball in motion. Open-ended for hands-on interaction. Control Panel: User-friendly interface with buttons or sliders to adjust the airflow intensity and observe its effect on the ball. Safety Features: Enclosed fan with mesh covering to prevent contact with moving parts. Rounded edges and non-toxic materials for a safe, child-friendly experience. Educational Signage: Panels with diagrams and explanations of Bernoulli’s principle, fluid dynamics, and real-world applications such as flight and aerodynamic design. Power Supply: Low-voltage, energy-efficient motor for the fan, ensuring continuous operation and minimal energy consumption.

Name of the Exhibits: What if colors are mixed?: What the exhibit says about: Two wheels with Primary colors, visitors can rotate the wheels and check combinations of colors., Mode of communication: Working exhibit with informative backlit panel, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/Internet point/Electrical point: N/A, Multimedia Content/ Software: N/A, Overall size of display and Exhibit: Overall size: 6' (L) x 7' (H), ELV: N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ).Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray.Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Base (9.0sqmt): Required shape and size stage with fabrication work for levelling of stage ht up to150-300 mm as per exhibit requirment finished with structure ply and Vinyl / Laminate flooring material finish. Facia finish with wooden beading matching with paint including concealed LED lighting etc complete . (Refer BOQ No. 7.11) Shape and size will differ according to Exhibit Requiremnt during excecution. Color Wheels: Two large, circular wheels (3-4 ft diameter each) made of durable acrylic or lightweight plastic. Each wheel is painted with primary color segments (red, blue, yellow) in high-quality, fade-resistant paint. Rotation Mechanism: Each wheel is mounted on a sturdy axle connected to a manual lever system. The levers are designed for smooth, user-friendly operation, allowing visitors to rotate the wheels at different speeds. Table Base: A robust steel or wood base, powder-coated or laminated for durability, houses the wheels and lever mechanisms. Transparent Protective Shield: Clear acrylic shields partially enclose the wheels to ensure safety while allowing full visibility. Frame: Steel or aluminum vertical support to securely mount the wheels at their designated height. Lighting: Integrated LED strip lighting around the wheels to enhance visibility of colors, especially in dim environments. Educational Signage: Informational panels explaining the science of color mixing, primary and secondary colors, and their applications in art and science. Safety Features: Smooth edges on all components, non-toxic paints, and securely fixed levers to prevent accidents.,

Name of the Exhibits: What’s liquid Density?: What the exhibit says about: Density of two liquids in the tube are different hence two of them can't be mixed together even after shaking or rotating the tube., Mode of communication: Working exhibit with informative backlit panel, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/Internet point/Electrical point: N/A, Multimedia Content/ Software: N/A, Overall size of display and Exhibit: Overall size: 4' (L) x 4' (H), ELV: N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ).Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray.Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Standy : Pedestal/base structure In Acrylic with floor levellers and removable frame with mirror screws. The pedestal/exhibit to be grouted to the floor wherever necessary basis the load and stability of the exhibit and related interactions. Complete in all respects. Refer to typical details drawings of screen mounting and pedestals. Acrylic Pipe: A clear, 6-inch diameter, high-strength acrylic pipe for storing oil and water. The pipe is sealed at both ends with leak-proof caps and mounted horizontally. Rotatable Surface: The pipe is attached to a circular rotatable platform made of durable metal or reinforced plastic, securely fixed to the wall. The platform allows users to rotate the pipe and observe the interaction of liquids. Liquid Contents: Non-toxic, food-grade oil and water, dyed in contrasting colors (e.g., yellow oil and blue water) for clear visibility of density separation. Wall Mounting: A powder-coated steel or aluminum bracket securely fixes the circular platform to the wall, ensuring stability and durability. Safety Features: Acrylic pipe is shatterproof to prevent breakage. Rounded edges and smooth surfaces on all components. Liquids are sealed to avoid spillage. Educational Signage: Panels beside the exhibit explain the concept of liquid density, immiscibility of oil and water, and real-world examples of density in nature and industry. Interactive Component: Rotatable handle or knob attached to the circular platform for user engagement, designed for smooth and easy operation.,

Name of the Exhibits: Create a vortex: What the exhibit says about: In this exhibit, visitors generate a big whirl by turning the handle that stirs the water. In the oceans, streams of water move in different directions. Sometimes when streams of water crash a whirl will arise. The longer the turning lasts the bigger the whirl will become. These kinds of whirls have a lot of suction power and can be dangerous for swimmers., Mode of communication: Working exhibit with informative backlit panel, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/Internet point/Electrical point: Electrical Point, Multimedia Content/ Software: N/A, Overall size of display and Exhibit: Overall size: 4' (L) x 9' (H) 3' dia Cylinder, ELV: N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ).Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray.Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Standy : Pedestal/base structure In Acrylic with floor levellers and removable frame with mirror screws. The pedestal/exhibit to be grouted to the floor wherever necessary basis the load and stability of the exhibit and related interactions. Complete in all respects. Refer to typical details drawings of screen mounting and pedestals. Base (1.2 sqmt): Required shape and size stage with fabrication work for levelling of stage ht up to150-300 mm as per exhibit requirment finished with structure ply and Vinyl / Laminate flooring material finish. Facia finish with wooden beading matching with paint including concealed LED lighting etc complete . (Refer BOQ No. 7.11) Shape and size will differ according to Exhibit Requiremnt during excecution. Glass Cylinder: A 3' diameter, high-strength tempered glass or acrylic cylinder with a height of approximately 7-8 feet, allowing clear visibility of the vortex formation. Base Structure: Powder-coated steel or aluminum base with a reinforced water reservoir and motor housing to ensure stability and durability. Water Reservoir: Built-in reservoir at the base, constructed from stainless steel or high-density plastic, designed to hold water safely. Motor and Pump System: A submersible water pump powered by an electric motor creates a vortex by circulating water at high speed. The motor is durable, energy-efficient, and enclosed for safety. Control Button: A user-friendly, waterproof push button located at a comfortable height, allowing visitors to activate the motor and observe the vortex creation. Lighting: Waterproof LED strip lights installed within the cylinder or base, enhancing the visibility and aesthetics of the vortex effect. Safety Features: Rounded edges and sealed glass to prevent injuries and water leakage. Non-slip base and protective casing for electrical components. Educational Signage: Informative panels beside the exhibit explain the physics behind vortex formation, including angular momentum, fluid dynamics, and natural examples like tornadoes and whirlpools.Power Supply: Low-voltage DC system for motor and lighting to ensure energy efficiency and user safety.,

Item Description

Sound: Name of the Exhibits: Doppler Effect: What the exhibit says about: The Doppler effect or Doppler shift is the change in frequency of a wave in relation to an observer. The wave source is moving on horizontal axis relative to the observer., Mode of communication: Working exhibit with informative backlit panel, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/Internet point/Electrical point: N/A, Multimedia Content/ Software: N/A, Overall size of display and Exhibit: Overall size: 6' (L) x 8' (H), ELV: N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ).Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray.Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Base (7.2 sqmt): Required shape and size stage with fabrication work for levelling of stage ht up to150-300 mm as per exhibit requirment finished with structure ply and Vinyl / Laminate flooring material finish. Facia finish with wooden beading matching with paint including concealed LED lighting etc complete . (Refer BOQ No. 7.11) Shape and size will differ according to Exhibit Requiremnt during excecution. Rotating Pipe: A lightweight, durable metal pipe (approximately 6' long) mounted horizontally. It is attached to a central rotating axis and balanced for smooth rotation. Central Support Structure: A sturdy vertical pipe (8' high) made of powder-coated steel or aluminum, securely anchored to a metal base for stability. Speaker: A small, high-quality speaker installed at one end of the rotating pipe, capable of emitting a continuous tone or pre-programmed sounds. Motorized Rotation System: An electric motor integrated at the base of the vertical pipe to rotate the horizontal pipe at a controlled speed. The motor is low-noise and enclosed for safety. Control Button: A durable, user-friendly push button activates the motor. It includes an LED indicator to show when the system is in operation. Safety Features: Transparent acrylic or polycarbonate shielding around the rotating pipe to prevent accidents. Rounded edges on all components and tamper-proof enclosures for electrical parts. Educational Signage: Informative panels describing the Doppler effect, its relevance in everyday phenomena (e.g., sirens, astronomy), and its applications in science and technology. Lighting: Optional LED lighting on the rotating pipe for visual emphasis and improved engagement. Power Supply: Low-voltage DC system for the motor and speaker, ensuring safe operation.,

Name of the Exhibits: Music Pipe: What the exhibit says about: Different music pipes generate different type of sounds when tapped with wooden disk, Mode of communication: Working exhibit with informative backlit panel, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/Internet point/Electrical point: N/A, Multimedia Content/ Software: N/A, Overall size of display and Exhibit: Overall size: 6' (L) x 8' (H), ELV: N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ).Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray.Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Standy : Pedestal/base structure In Acrylic with floor levellers and removable frame with mirror screws. The pedestal/exhibit to be grouted to the floor wherever necessary basis the load and stability of the exhibit and related interactions. Complete in all respects. Refer to typical details drawings of screen mounting and pedestals. Pipes: 25 metal pipes, each with different lengths (ranging from 12" to 36") to produce varying pitches when struck. The pipes are securely mounted on a vertical frame made of wood or metal. The pipes are arranged in a scale-like formation for visual appeal and accessibility. Wooden Plates: High-quality, polished wooden plates (typically hardwood like oak or maple) are attached to the bottom of each pipe. These plates act as the “mouth” or contact point, where users tap to generate sound. The plates are securely fastened to each pipe to ensure durability and clear tone generation. Frame: A sturdy, wooden or metal frame (approximately 6' x 8'), providing support for the pipes and their mounting mechanism. The frame is designed to hold the pipes at an angle, allowing easy tapping by visitors. Striking Mechanism: The pipes are tapped by hand, but optional mallets or rubber-tipped hammers can be provided for safety and ease of use. Safety Features: Smooth, rounded edges on the wooden plates and frame to prevent injury. Stable base or mounting system to ensure the pipes remain securely in place during use. Educational Signage: Informational panels explaining the principles of sound, frequency, and how the length of a pipe affects the pitch produced. The exhibit may also include basic music theory information, such as scales and note recognition.,

Name of the Exhibits: Can heat produce noise?: What the exhibit says about: RAJKE Tube piano Rijke tubes are a little known way of turning heat into sound without any moving parts. , Mode of communication: Working exhibit with informative backlit panel, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/Internet point/Electrical point: Electrical Point, Multimedia Content/ Software: N/A, Overall size of display and Exhibit: Overall size: 3' (L) x 3' (W), ELV: N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ).Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray.Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Table - 1 (900-1200mm dia x7500mm H) : Table as per required size made up 12mm MR plywood with necessary wooden/MS framing finished with 1.2mm laminate and 6mm thk corian cladding facia required sizes with floor levellers. The pedestal/exhibit to be grouted to the floor wherever necessary basis the load and stability of the exhibit and related interactions .Shape and size will differ as per exibit requirement during excecution. Tube Construction: 6 glass tubes (approximately 12-24" in length) are arranged in a row, each tube carefully cut to different lengths to produce varying pitches. The tubes are mounted horizontally on a wooden or metal frame for stability. Air Flow Mechanism: Each tube is equipped with an air valve or bellows system that can be operated by the user to generate sound. A foot pedal or hand lever may be used to activate air flow into the tubes. Frame: The frame is made from sturdy, high-quality wood or metal, designed to support the tubes and the air mechanism securely. It is compact, with easy access for interaction. Control Mechanism: The air valves or bellows are activated by a user-friendly mechanism, such as buttons, a keyboard-like control panel, or a set of levers, allowing users to "play" the tube piano. Sound Generation: The sound is produced through the resonance of air within each tube, with larger tubes creating lower notes and smaller tubes creating higher notes. Educational Signage: Display panels explaining the science behind sound resonance, the relationship between tube length and pitch, and the concept of air pressure in musical instruments. Safety Features: Smooth, rounded edges on all tubes and frames to prevent injury. Securely mounted tubes to avoid any accidental dislodging. Non-toxic materials and finishes used throughout the exhibit.,

Name of the Exhibits: How do you make different sounds?: What the exhibit says about: The exhibit mimics what you do with your mouth and throat when you make the vowel sounds., Mode of communication: Working exhibit with informative backlit panel, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/Internet point/Electrical point: Electrical Point, Multimedia Content/ Software: N/A, Overall size of display and Exhibit: Overall size: 3' (L) x 3' (W), ELV: N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ).Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray.Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Table - 1 (900-1200mm dia x7500mm H) : Table as per required size made up 12mm MR plywood with necessary wooden/MS framing finished with 1.2mm laminate and 6mm thk corian cladding facia required sizes with floor levellers. The pedestal/exhibit to be grouted to the floor wherever necessary basis the load and stability of the exhibit and related interactions .Shape and size will differ as per exibit requirement during excecution. Glass Tubes: Several glass tubes of various shapes and sizes, each designed to create different pitch or resonance. The tubes are carefully shaped to represent different vowel sounds, such as "A," "E," "I," "O," "U," (Or Hindi Vowels) by altering the size and curvature. Tubes are made from high-quality, durable borosilicate glass to ensure clarity and resistance to breakage. Air Pressure Valve: Each glass tube is equipped with a manual air pressure valve or bulb that allows users to control the airflow into the tube. These valves are made from durable rubber or silicone for smooth operation and a consistent airflow. Frame: A compact, sturdy frame made from wood or metal holds the tubes in a horizontal or vertical alignment, securely mounting each tube while providing easy access for interaction. Control Mechanism: The user can press or squeeze the air pressure valve to modulate the airflow into the tubes, generating different sounds corresponding to the vowel shapes. The exhibit allows for interaction and exploration of sound changes based on air pressure. Educational Signage: Informational panels explain how the shape of the tubes and the pressure of the air affect the sound produced. It also highlights the connection between human vocal anatomy and vowel sound formation, making it relevant for exploring both physics and linguistics.,

Name of the Exhibits: Can Music be touch less? (Upgraded): What the exhibit says about: An instrument which is having sensors instead of strings, a visitor can play the same using the hand moments near the sensor area., Mode of communication: Working exhibit with informative backlit panel, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/Internet point/Electrical point: Electrical Point, Multimedia Content/ Software: N/A, Overall size of display and Exhibit: Overall size: 4' (L) x 4' (W) Harp Size: 3' (W) x 4' (H), ELV: N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ).Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray.Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Table - 1 (750-900mm dia x7500mm H) : Table as per required size made up 12mm MR plywood with necessary wooden/MS framing finished with 1.2mm laminate and 6mm thk corian cladding facia required sizes with floor levellers. The pedestal/exhibit to be grouted to the floor wherever necessary basis the load and stability of the exhibit and related interactions .Shape and size will differ as per exibit requirement during excecution. Object: Exhibit to be repaired and upgraded.,

Name of the Exhibits: Can temperature affect the sound waves? (Upgraded): What the exhibit says about: The siren consisted of a rotating disc with periodically spaced holes that created puffs of compressed air at regular intervals., Mode of communication: Working exhibit with informative backlit panel, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/Internet point/Electrical point: Electrical Point, Multimedia Content/ Software: N/A, Overall size of display and Exhibit: Overall size: 3' (L) x 3' (W), ELV: N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ).Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray.Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Table - 1 (750-900mm dia x7500mm H) : Table as per required size made up 12mm MR plywood with necessary wooden/MS framing finished with 1.2mm laminate and 6mm thk corian cladding facia required sizes with floor levellers. The pedestal/exhibit to be grouted to the floor wherever necessary basis the load and stability of the exhibit and related interactions .Shape and size will differ as per exibit requirement during excecution. Rotating Disc: Aluminum or stainless steel disc, 3mm thick, with evenly spaced perforations to generate sound waves. Diameter approximately 12 inches. Frame and Housing: Compact 3' x 3' enclosure made of powder-coated steel or aluminum, protecting mechanical components while allowing visibility. Air Supply System: Integrated compressor or hand-operated air pump to provide a controlled stream of compressed air. Drive Mechanism: Electric motor (low voltage) with speed control for adjustable disc rotation, enabling variation in sound frequency. User Interface: Simple knob or switch for speed adjustment, placed on an accessible control panel. Sound Output: Acoustic chamber for amplifying generated sound waves. Base: Sturdy, non-slip base with vibration-dampening mounts for stability and noise reduction. Safety Features: Transparent acrylic or polycarbonate guard around the rotating disc to prevent user contact. Power Requirements: Low-voltage power supply with concealed wiring. Educational Panel: Mounted display explaining the mechanics and physics of sound wave generation through rotating discs.,

Name of the Exhibits: What’s the speed of the sound?: What the exhibit says about: Sound has a specific speed, when it transfers through the long pipe, it takes time to reach to the other end. Which creates an effect of echo., Mode of communication: Working exhibit with informative backlit panel, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/Internet point/Electrical point: N/A, Multimedia Content/ Software: N/A, Overall size of display and Exhibit: Overall size: 8' (L) x 2' (W), ELV: N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ).Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray.Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Standy : Pedestal/base structure In Acrylic with floor levellers and removable frame with mirror screws. The pedestal/exhibit to be grouted to the floor wherever necessary basis the load and stability of the exhibit and related interactions. Complete in all respects. Refer to typical details drawings of screen mounting and pedestals. Pipe Construction: A long, straight pipe (8' in length) made of PVC or metal (e.g., aluminum) to ensure durability and proper acoustics. The pipe should have a diameter of around 4-6 inches for optimal sound travel, with smooth inner surfaces to minimize sound distortion. Mounting and Support: The pipe is securely mounted horizontally on a sturdy frame made of wood or metal, ensuring it is stable and can support the sound pressure generated during the demonstration. The frame is designed to allow easy access to both ends of the pipe for the participants. User Interaction: The two visitors stand at opposite ends of the pipe. One visitor generates a sound (e.g., a clap or a whistle), and the other observes the time it takes for the sound to travel through the pipe. This demonstrates the difference in perception of sound arrival due to distance. Control Mechanism: A button or lever at one end of the pipe can be used to generate a sound (e.g., a speaker or sound-emitting device). Alternatively, the exhibit can use manual methods, like a whistle or hand clap, at one end. Safety Features:Smooth edges on the pipe to avoid injury, Non-toxic materials used in construction.Sturdy base to prevent tipping, especially during visitor interaction. Educational Signage: Panels explaining the physics behind sound transmission, the concept of sound waves, and the factors affecting the speed of sound (e.g., air temperature, humidity, medium). The exhibit can include information about sound travel in different environments, such as air, water, and solids.,

Name of the Exhibits: What waves does a guitar generate?: What the exhibit says about: The musical strings are stretched from top to bottom. The tension can be varied by pressing a foot pedal at the bottom. The drum with alternate horizontal black and white strips is rotated. Then the strings are plucked. The visitor sees a series of standing wave generated with the strings., Mode of communication: Working exhibit with informative backlit panel, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/Internet point/Electrical point: Electrical Point, Multimedia Content/ Software: N/A, Overall size of display and Exhibit: Overall size: 3' (L) x 6' (H), ELV: N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ).Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray.Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Main Structure: A 3' x 6' vertical frame made from sturdy metal or wood, designed to securely hold the vibrating medium and associated components. The frame is lightweight yet strong, ensuring safety during use. Vibration Source: A variable frequency motor or mechanical oscillator at the bottom of the frame that generates vibrations. The motor is connected to a string or membrane that vibrates when the motor is activated. The motor speed can be adjusted to show different wave patterns. Medium: String: A thin, strong string (e.g., nylon or steel) stretched between two fixed points at the top and bottom of the frame. The string will vibrate to form standing waves when the motor is activated. Membrane: An alternative to the string, a thin rubber or plastic membrane stretched over a frame, with vibration points attached at either side to demonstrate standing waves in a 2D surface. Control Mechanism: Buttons or dials that allow users to adjust the frequency and amplitude of the vibrations, demonstrating how different frequencies produce different wave patterns, including nodes and antinodes.,

Light: Name of the Exhibits: Is light visible?: What the exhibit says about: Light itself is invisible but when it falls on any surface and reflects to your eyes, it is then visible. When you look inside the chamber with light passing through it, you can only see the dark. But as you put your hand inside it, light is visible., Mode of communication: Working exhibit with informative backlit panel, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/Internet point/Electrical point: Electrical Point, Multimedia Content/ Software: N/A, Overall size of display and Exhibit: Overall size: 3' (L) x 6' (H), ELV: N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ).Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray.Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Base (1.5 sqmt): Required shape and size stage with fabrication work for levelling of stage ht up to150-300 mm as per exhibit requirment finished with structure ply and Vinyl / Laminate flooring material finish. Facia finish with wooden beading matching with paint including concealed LED lighting etc complete . (Refer BOQ No. 7.11) Shape and size will differ according to Exhibit Requiremnt during excecution. Object: Wooden box with dark view panel placed at eye level. Light is passed through centre part vertically. Visitors asked to see through view panel and asked if light is visible or not.,

Name of the Exhibits: How rainbow is formed?: What the exhibit says about: Shine the light through the prism and onto the white background. A beautiful array of colors will be displayed. Explains the process of light refracting into its components: white light is actually made up of red, orange, yellow, green, blue, indigo and violet light., Mode of communication: Working exhibit with informative backlit panel, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/Internet point/Electrical point: Electrical Point, Multimedia Content/ Software: N/A, Overall size of display and Exhibit: Overall size: 3' dia, ELV: N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ).Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray.Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Table - 1 (1000-1200mm L x 1000-1200mm Bx7500mm H) : Table as per required size made up 12mm MR plywood with necessary wooden/MS framing finished with 1.2mm laminate and 6mm thk corian cladding facia required sizes with floor levellers. The pedestal/exhibit to be grouted to the floor wherever necessary basis the load and stability of the exhibit and related interactions .Shape and size will differ as per exibit requirement during excecution. Object: Exhibit as per the description/ reference image/ link to be placed . ,

Name of the Exhibits: Are shadows always gray? (Upgraded): What the exhibit says about: With these three lights you can make shadows of three different colors - Ref, Blue and Yellow., Mode of communication: Working exhibit with informative backlit panel, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/Internet point/Electrical point: Electrical Point, Multimedia Content/ Software: N/A, Overall size of display and Exhibit: Overall size: 6' (L) x 6' (W), ELV: N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ).Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray.Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Existing exhibit to be retained and refurbished,

Name of the Exhibits: Visual Illusion: What the exhibit says about: With the rope hanging down, the left and right sides of the board appear identical. Lifting the rope shows the dramatic difference that your eyes missed—and continue to miss, as soon as you let the rope fall again., Mode of communication: Working exhibit with informative backlit panel, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/Internet point/Electrical point: N/A, Multimedia Content/ Software: N/A, Overall size of display and Exhibit: Overall size: 4' (L) x 6' (H), ELV: N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ).Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray.Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Table - 1 (1000-1200mm L x 1000-1200mm Bx7500mm H) : Table as per required size made up 12mm MR plywood with necessary wooden/MS framing finished with 1.2mm laminate and 6mm thk corian cladding facia required sizes with floor levellers. The pedestal/exhibit to be grouted to the floor wherever necessary basis the load and stability of the exhibit and related interactions .Shape and size will differ as per exibit requirement during excecution. Object: Exhibit as per the description/ reference image/ link to be placed . ,

Name of the Exhibits: What’s Internal Reflection?: What the exhibit says about: The fiber transmits light using an optical principle called total internal reflection that keeps the light in the core of the fiber., Mode of communication: Working exhibit with informative backlit panel, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/Internet point/Electrical point: Electrical Point, Multimedia Content/ Software: N/A, Overall size of display and Exhibit: Overall size: 6' (L) x 6' (W), ELV: N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ).Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray.Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Main Structure:The frame is constructed from durable metal or aluminum, designed to support the weight and structure of the optic fibers. It should be light enough to allow for easy installation and stable enough to hold the components in place.The frame can be shaped as a vertical grid or suspended arrangement, with dimensions of 6' (L) x 6' (W), allowing the optic fibers to hang freely and create a visually dynamic pattern. Optic Fibers:A collection of high-quality optic fibers, each around 1mm in diameter, are threaded through the frame and hang down in a uniform or decorative manner. These fibers are designed to transmit light along their length, creating glowing points along the fiber strands.The fibers can be bundled together or arranged individually to form different patterns or designs, such as cascading light effects or concentric circles. Light Source:A high-powered LED light source is used to illuminate the optic fibers. The light is placed at the top of the frame, where the fibers are inserted into a light distribution system. The LED light should be adjustable for color and intensity, allowing the exhibit to show a range of vibrant colors or a steady light effect. The LED light can be programmed to change colors or brightness, offering dynamic visual effects for a more engaging experience. Control System:An interactive control panel allows visitors to change the color or brightness of the light, adjust the speed of light transitions, or toggle between different lighting effects (e.g., pulsating, flowing, or static colors).Optionally, sensors can be added to allow the exhibit to respond to user input, such as sound or motion, adding an extra layer of interactivity. Electrical Components:The wiring for the optic fibers and LED light source should be safely enclosed and insulated to prevent accidents. A power supply that meets the necessary voltage requirements for the light system should be included, ensuring safe operation of the exhibit.The LED lighting system should have low heat output to ensure safety and energy efficiency. Educational Signage:Panels should explain the science of optical fibers, including how light travels through fibers and their applications in various technologies, such as communication systems, medical instruments, and decorative lighting.The signage should include diagrams illustrating the process of light transmission in fiber optics and highlight the significance of light reflection and refraction within the fibers.,

Name of the Exhibits: What’s Light Refraction?: What the exhibit says about: total internal reflection, in physics, complete reflection of a ray of light within a medium such as water or glass from the surrounding surfaces back into the medium. The phenomenon occurs if the angle of incidence is greater than a certain limiting angle, called the critical angle., Mode of communication: Working exhibit with informative backlit panel, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/Internet point/Electrical point: Electrical Point, Multimedia Content/ Software: N/A, Overall size of display and Exhibit: Overall size: 3' (L) x 3' (W), ELV: N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ).Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray.Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Table - 1 (1000-1200mm L x 1000-1200mm Bx7500mm H) : Table as per required size made up 12mm MR plywood with necessary wooden/MS framing finished with 1.2mm laminate and 6mm thk corian cladding facia required sizes with floor levellers. The pedestal/exhibit to be grouted to the floor wherever necessary basis the load and stability of the exhibit and related interactions .Shape and size will differ as per exibit requirement during excecution. Refraction Medium:A transparent acrylic or glass tank (approximately 2' x 2') is used to house the medium (water, oil, or transparent gel). This is where the light will pass through, demonstrating the change in direction caused by light refraction.The tank should have a sealed, waterproof design to prevent leakage and allow for easy cleaning. Light Source:A small, adjustable LED light source is placed outside the tank, at one end, emitting a focused beam of light towards the medium. The LED light should provide consistent illumination without producing heat that could affect the medium or cause discomfort for users. Interactive Mechanism:Visitors can use a manual or motorized mechanism (such as a lever or button) to control the angle of the light beam entering the medium, allowing them to experiment with the refraction angle and observe changes in the light's path.A protractor or angle indicator attached to the frame helps users visually measure and understand the angle of incidence and refraction. Educational Signage:Information panels explaining the principle of refraction, including Snell’s Law and the concept of light bending when it moves through different media.Diagrams showing how light behaves when transitioning from one medium (air) to another (water, oil, or glass), and the mathematical relationship between the angle of incidence and refraction. Safety Features:All components, especially the light source, should be low-voltage and insulated to prevent electrical hazards.The tank should be made from shatter-resistant acrylic or tempered glass to ensure durability and safety.,

Name of the Exhibits: Scattering: What the exhibit says about: Light is seen through a very narrow slit and multi-color scattering is observed, Mode of communication: Working exhibit with informative backlit panel, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/Internet point/Electrical point: Electrical Point, Multimedia Content/ Software: N/A, Overall size of display and Exhibit: Overall size: 3' (L) x 3' (W), ELV: N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ).Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray.Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Table - 1 (1000-1200mm L x 1000-1200mm Bx7500mm H) : Table as per required size made up 12mm MR plywood with necessary wooden/MS framing finished with 1.2mm laminate and 6mm thk corian cladding facia required sizes with floor levellers. The pedestal/exhibit to be grouted to the floor wherever necessary basis the load and stability of the exhibit and related interactions .Shape and size will differ as per exibit requirement during excecution. Light Source:A controllable LED light source (preferably white light) is used to create a beam of light. The light should be mounted on an adjustable mechanism to control its angle and intensity, demonstrating how the scattering effect changes with the angle of incidence.The light source should be positioned at one end of the exhibit, allowing the light to pass through a medium and scatter. Scattering Medium:A transparent container (like a glass or acrylic box) is filled with a scattering medium, such as fine particles suspended in air (e.g., smoke, fog, or a fine mist of water droplets), or a translucent material like frosted glass. The medium should be chosen based on the desired effect—smoke or mist can show scattering very clearly, whereas a more subtle medium like frosted glass demonstrates how light diffuses when passing through a semi-transparent surface. Interactive Mechanism:Visitors can adjust the angle of the light source or manipulate the medium to see how the scattering effect changes. This could be achieved by rotating the light source or moving the container with the scattering particles. The exhibit could include a small control panel or simple switches to turn on/off the mist or fog generator to increase the intensity of scattering effects when desired. Educational Signage:A clear, concise explanation of light scattering, including the differences between Rayleigh scattering and Mie scattering, should be displayed.Diagrams and visuals should show how light scatters when it interacts with different sizes of particles, explaining real-world phenomena such as the blue sky and red sunsets.Possible applications of light scattering, such as in weather prediction and the study of atmospheric particles, can be included. Safety Features:The light source should be low-powered and comply with safety regulations. The mist or fog generator should use a non-toxic, safe solution (such as distilled water) to create the effect, ensuring no health risks to visitors.All components should be securely housed to prevent accidental exposure to the light source or other elements. ,

Name of the Exhibits: How laser works?: What the exhibit says about: “Laser” is an acronym for Light Amplification by Stimulated Emission of Radiation A laser is created when electrons in the atoms in optical materials like glass, crystal, or gas absorb the energy from an electrical current or a light. That extra energy “excites” the electrons enough to move from a lower-energy orbit to a higher-energy orbit around the atom’s nucleus., Mode of communication: Working exhibit with informative backlit panel, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/Internet point/Electrical point: Electrical Point, Multimedia Content/ Software: N/A, Overall size of display and Exhibit: Overall size: 4' (L) x 4' (W), ELV: N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ).Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray.Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Main Structure:The exhibit frame is constructed from sturdy metal or wood, designed to support the components securely. The frame should be compact and stable, with smooth surfaces to minimize light interference and ensure safe handling.The display surface should be matte black or dark to enhance the contrast of the laser beam. Laser Light Source:A low-powered, visible laser (Class 1 or 2) is used for safety, typically with a red or green wavelength. This laser will be housed in a protective casing, and its beam will be directed through various optical components to demonstrate its properties.The laser source should be adjustable in terms of power and direction to show different effects like divergence or focus. Optical Components:Mirrors: A series of small, adjustable mirrors (made from aluminum or glass with reflective coatings) are placed along the path of the laser beam to demonstrate reflection. Lenses: Convex or concave lenses (made from glass or high-quality acrylic) will focus or spread the laser beam, allowing visitors to see how light can be manipulated. Beam Splitter: Used to show how a laser beam can be divided into two or more paths, helping to explain the concept of interference and diffraction. Interactive Mechanism:Visitors can control the position of mirrors and lenses using knobs or sliders, adjusting the laser beam’s direction, focus, and splitting path. This interactivity allows users to explore how different materials and configurations affect the laser’s behavior. A simple control panel can be included to adjust the power or wavelength of the laser for more advanced demonstrations. Educational Signage: Signage should explain the basic principle of lasers, including the concept of light amplification through stimulated emission of radiation (LASER), how lasers differ from ordinary light, and their applications in everyday life.Diagrams and animations should illustrate the process of photon emission and amplification within the laser medium (like a gas or crystal).

Name of the Exhibits: What’s energy Efficiency?: What the exhibit says about: The exhibit talks about the illumination and how the surround color eeffects the net output. 3 small enclosures are arranged with different study room materials like books etc. The three rooms are having illumination of same lux. However the back ground color of the room walls are different to show that same illumination does not lighten up things in the same way due to different background., Mode of communication: Working exhibit with informative backlit panel, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/Internet point/Electrical point: Electrical Point, Multimedia Content/ Software: N/A, Overall size of display and Exhibit: Overall size: 2' (L) x 2' (W) x 7' (H) Each, ELV: N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ).Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray.Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Table - 1 (1000-1200mm L x 1000-1200mm Bx7500mm H) : Table as per required size made up 12mm MR plywood with necessary wooden/MS framing finished with 1.2mm laminate and 6mm thk corian cladding facia required sizes with floor levellers. The pedestal/exhibit to be grouted to the floor wherever necessary basis the load and stability of the exhibit and related interactions .Shape and size will differ as per exibit requirement during excecution. Object : Exhibit as per the description/ reference image/ link to be placed . ,

Vision: Name of the Exhibits: How much area our eyes can cover?: What the exhibit says about: When you sit on a chair, you're asked to put your nosetip to a location and you can see the round space. It's what allows you to see objects all around you without turning your head or moving your eyes., Mode of communication: Working exhibit with informative backlit panel, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/Internet point/Electrical point: N/A, Multimedia Content/ Software: N/A, Overall size of display and Exhibit: Overall size: 3' (L) x 3' (W), ELV: N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ).Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray.Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Table - 1 (1000-1200mm L x 1000-1200mm Bx7500mm H) : Table as per required size made up 12mm MR plywood with necessary wooden/MS framing finished with 1.2mm laminate and 6mm thk corian cladding facia required sizes with floor levellers. The pedestal/exhibit to be grouted to the floor wherever necessary basis the load and stability of the exhibit and related interactions .Shape and size will differ as per exibit requirement during excecution. A stable metal or wooden frame supports a fixed chair placed in the center of the setup. The frame is painted in matte black for a clean appearance.The exhibit includes a semi-circular or rounded reflective surface (acrylic mirror or polished metal) mounted at eye level when seated. This structure creates the effect of encompassing the visitor's visual field. Seating:A cushioned chair, fixed to the base for stability, is ergonomically designed to ensure the visitor sits upright and aligns their head properly. Interactive Elements:A small, adjustable nose-tip marker is positioned directly in front of the visitor. This marker serves as the focal point to direct their gaze forward.A curved mirror surface (or translucent material with a backlit effect) displays the visitor's peripheral surroundings in a round, seamless view. Educational Signage:Clear explanations about how the human visual field works, including peripheral vision and its importance in everyday life.Diagrams illustrating the role of the retina and eye structure in wide-angle perception. Materials: Frame and Chair: Metal or wood for durability and safety. Reflective Surface: High-quality acrylic or polished stainless steel for the rounded mirror. Nose Marker: Adjustable plastic or rubber for a comfortable and hygienic touchpoint. Base: Anti-slip rubberized material for stability.,

Name of the Exhibits: Is shadow 3-dimentional?: What the exhibit says about: There is a screen, on the back side of which there's a 3D object (eg. Vase) and it rotates. On the back side of the same, two light sources (Blue and Green) is provided so two shadows of the vase is displayed on the screen. By using the Red+Yellow filter, a visitor can see the 3D Shadow., Mode of communication: Working exhibit with informative backlit panel, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/Internet point/Electrical point: Electrical Point, Multimedia Content/ Software: N/A, Overall size of display and Exhibit: Overall size: 4' (L) x 4' (W), ELV: N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ).Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray.Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Object : Exhibit as per the description/ reference image/ link to be placed . ,

Name of the Exhibits: Is it real? (Retained): What the exhibit says about: What you perceive as an object in this Snack is really an image in space, created by two concave mirrors. This illusion would do credit to any magician., Mode of communication: Working exhibit with informative backlit panel, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/Internet point/Electrical point: N/A, Multimedia Content/ Software: N/A, Overall size of display and Exhibit: Overall size: 3' (L) x 3' (W), ELV: N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ).Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray.Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Table - 1 (900-1200mm dia x7500mm H) : Table as per required size made up 12mm MR plywood with necessary wooden/MS framing finished with 1.2mm laminate and 6mm thk corian cladding facia required sizes with floor levellers. The pedestal/exhibit to be grouted to the floor wherever necessary basis the load and stability of the exhibit and related interactions .Shape and size will differ as per exibit requirement during excecution. Standy : Pedestal/base structure In Acrylic with floor levellers and removable frame with mirror screws. The pedestal/exhibit to be grouted to the floor wherever necessary basis the load and stability of the exhibit and related interactions. Complete in all respects. Refer to typical details drawings of screen mounting and pedestals. Object : Exhibit as per the description/ reference image/ link to be placed . ,

Name of the Exhibits: How our Eye Works? (Upgraded): What the exhibit says about: The Amount of light is controlled by the lens of an eye , Mode of communication: Working exhibit with informative backlit panel, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/Internet point/Electrical point: Electrical Point, Multimedia Content/ Software: N/A, Overall size of display and Exhibit: Overall size: 4' (L) x 2' (W), ELV: N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ).Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray.Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Table - 1 (1000-1200mm L x 1000-1200mm Bx7500mm H) : Table as per required size made up 12mm MR plywood with necessary wooden/MS framing finished with 1.2mm laminate and 6mm thk corian cladding facia required sizes with floor levellers. The pedestal/exhibit to be grouted to the floor wherever necessary basis the load and stability of the exhibit and related interactions .Shape and size will differ as per exibit requirement during excecution. Object : Exhibit as per the description/ reference image/ link to be placed . ,

Name of the Exhibits: How external lenses fix our vision? (Upgraded): What the exhibit says about: What can be the defects of vision and how it can be treated with the use of external lens , Mode of communication: Working exhibit with informative backlit panel, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/Internet point/Electrical point: Electrical Point, Multimedia Content/ Software: N/A, Overall size of display and Exhibit: Overall size: 4' (L) x 2' (W), ELV: N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ).Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray.Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Table - 1 (1000-1200mm L x 1000-1200mm Bx7500mm H) : Table as per required size made up 12mm MR plywood with necessary wooden/MS framing finished with 1.2mm laminate and 6mm thk corian cladding facia required sizes with floor levellers. The pedestal/exhibit to be grouted to the floor wherever necessary basis the load and stability of the exhibit and related interactions .Shape and size will differ as per exibit requirement during excecution. Object : Exhibit as per the description/ reference image/ link to be placed . ,

Optical Illusion: Name of the Exhibits: How Kaleidoscope Works?: What the exhibit says about: The 3D kaleidoscope exhibit offers a mesmerizing visual experience that transforms the familiar concept of a kaleidoscope into a three-dimensional spectacle. This exhibit typically consists of a large, walk-in structure or a viewing device that uses mirrors and light to create intricate, ever-changing patterns and shapes that appear to have depth and dimension., Mode of communication: Working exhibit with informative backlit panel, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : 65" LED Display, Audio : N/A, Data point/Internet point/Electrical point: Electrical Point, Multimedia Content/ Software: Different types of illusive/ geometrical videos (3D) are played in loop., Overall size of display and Exhibit: Overall size: 6' (L) x 7' (B) x 7' (H), ELV: N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ).Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray.Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Main Structure: Frame: Fabricated using a robust metal structure (stainless steel or aluminum) to support the exhibit's weight and ensure durability. Exterior Panels: Made from plywood or MDF, finished with matte or glossy paint, or vinyl graphics for aesthetic appeal. Mirrors:High-quality, polished glass mirrors (with protective backing) or lightweight acrylic mirrors or Mirror finished ACP arranged in triangular or polygonal configurations to reflect light and create infinite patterns. The mirrors are securely mounted to prevent distortion or movement. Viewing Area:Walk-in structure with an open entrance, allowing visitors to step inside and immerse themselves in the mirrored environment. The interior floor is lined with non-slip material for safety. Optionally, a peephole or enclosed viewer can be provided for smaller installations. Projection: 3D projection on the opposite side runs on loop and visitors enter with 3D glasses to experience the 3D effects. Interactive Mechanism:Rotating platforms or elements inside the structure allow visitors to manipulate objects or lights, altering the patterns in real-time. Educational Signage:Brief descriptions explaining the geometry and physics of reflections, symmetry, and pattern generation inside a kaleidoscope. Materials: Frame: Stainless steel or aluminum. Mirrors: Glass or acrylic with reflective coating. Lighting: Programmable LED fixtures. Exterior Finish: Plywood or MDF with protective coatings.,

Name of the Exhibits: Why my size changes?: What the exhibit says about: Your height increases at one corner and decreases at the other corner of the room. , Mode of communication: Working exhibit with informative backlit panel, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/Internet point/Electrical point: N/A, Multimedia Content/ Software: N/A, Overall size of display and Exhibit: Overall size: 8' (L) x 8' (B) x 8' (H), ELV: N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ).Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray.Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Main Structure: Frame: Made of robust aluminum or steel, ensuring the stability of the room structure. Wall Panels: MDF or plywood, finished with smooth, durable paint or wallpaper. The walls are angled to create the forced perspective effect. Floor:Slightly sloped wooden or composite material base with a non-slip coating, designed to subtly alter perceived height while being safe to walk on. Ceiling:Lightweight MDF or acrylic panels angled downward from one end to enhance the illusion, painted to match the walls. Interactive Elements:Measurement markers or mirrors on walls to help visitors gauge their perceived height differences. Optional markers on the floor to guide visitors to specific observation points. Lighting:Bright LED lights installed uniformly to eliminate shadows and enhance the illusion's effectiveness. Educational Signage:Information about forced perspective and how angles and slopes manipulate human perception. Materials: Frame: Aluminum or steel. Walls and Ceiling: MDF or plywood. Flooring: Wooden or composite material with anti-slip finish. Lighting: LED fixtures.,

Name of the Exhibits: Strobotop What's Hologram?: What the exhibit says about: A conical body rotates at a fixed speed on its vertical axis. Along the slant surface, series of pictures are drawn in 4 horizontal rows at different height from the base. As the radius varies the rotating photographs at different rows have different frequencies. As the stroboscope frequency is adjusted, one can make the photos at different rows static at particular frequency. Otherwise one can see running dynosour, flying teradectyle etc., Mode of communication: Working exhibit with informative backlit panel, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/Internet point/Electrical point: N/A, Multimedia Content/ Software: N/A, Overall size of display and Exhibit: Overall size: 3' (L) x 3' (W), ELV: N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ).Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray.Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Rotating Disk Mechanism: Disk Material: Acrylic or lightweight metal disks with printed designs for animation effects. Rotation System: DC motor with variable speed control to adjust the spinning rate of the disk. Strobe Light: Type: LED strobe light with adjustable flash frequency, mounted securely to focus on the spinning disk. Control Panel: Interface: User-friendly knobs or sliders for controlling disk speed and strobe frequency. Material: Polycarbonate or ABS plastic for durability and aesthetic appeal. Enclosure and Safety: Material: Clear acrylic guard around the spinning mechanism to ensure safety without obstructing visibility. Features: Ventilation slots for motor cooling. Educational Signage: Description of stroboscopic principles and examples of its applications in real life, such as film animation and motion analysis.,

Name of the Exhibits: Your Vision can be manipulated: What the exhibit says about: Vertical cylinder with top of the half mirror and full mirror at the bottom with back-lit wall on the side of cylinder creates an infinity well effect. Exhibit is placed on the pathway in a way that people can walk over it., Mode of communication: Working exhibit with informative backlit panel, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/Internet point/Electrical point: Electrical Point, Multimedia Content/ Software: N/A, Overall size of display and Exhibit: Overall size: 4' (L) x 4' (W), ELV: N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ).Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray.Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Base Structure: Material: MDF or plywood with a durable finish to support the mirrors and electronics. Dimensions: 4' x 4', ensuring stability and sufficient surface area for the illusion. Mirrors: Top Mirror: Transparent one-way mirror made of tempered glass or acrylic. Bottom Mirror: Standard mirror with high-reflectivity coating, securely mounted at the base. LED Lighting: Type: Energy-efficient LED strips placed along the inner edges to create the infinite reflection effect. Color: Adjustable RGB LEDs for dynamic visual effects. Enclosure: Walls: Black-painted MDF or ABS plastic to enhance the illusion by minimizing external light interference. Guard Rail: Clear acrylic or tempered glass barrier for safety while maintaining visibility. Control System: Interface: Simple switch or button to toggle lights on and off. Power: Low-voltage adapter with a concealed power connection. Educational Signage: Information about the principles of reflection, light, and perception that create the illusion.,

Name of the Exhibits: Can I be invisible?: What the exhibit says about: Lenticular lenses or light-bending material, such as acrylic sheets with engineered optics, strategically placed to distort the visitor’s reflection or refract light., Mode of communication: Working exhibit with informative backlit panel, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/Internet point/Electrical point: N/A, Multimedia Content/ Software: N/A, Overall size of display and Exhibit: Overall size: 6' (L) x 4' (W), ELV: N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ).Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray.Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Base Structure: Material: MDF or plywood with a matte black finish to reduce reflections and enhance the effect. Optical Material: Invisibility Panel: Lenticular lenses or light-bending material, such as acrylic sheets with engineered optics, strategically placed to distort the visitor’s reflection or refract light. Mirrors: Front Mirror: High-quality polished glass mirror for clear reflection. Angle Adjustment: Mounted on a stable frame with adjustable tilt for optimal illusion. Lighting: Type: Soft LED lighting to ensure visibility of the effect while avoiding glare. Placement: Around the edges of the panel to enhance the refractive distortion. Enclosure and Safety: Side Walls: Black acrylic or MDF panels to focus attention on the illusion area. Barrier: Clear acrylic guard to ensure safety and prevent direct contact with optical components. Educational Signage: Explains the science behind invisibility, including light refraction, reflection, and optical camouflage.,

Name of the Exhibits: Power of Concentration: What the exhibit says about: Concentrate on the Red spot on the top glass disc but you will aso see the background cross marks. Place a coin at a distance. Press the switch and the bottom disc start rotating . Concentrate on the red spot. The distant coin and the background cross marks will tend to disappear., Mode of communication: Working exhibit with informative backlit panel, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/Internet point/Electrical point: N/A, Multimedia Content/ Software: N/A, Overall size of display and Exhibit: Overall size: 4' (L) x 4' (W), ELV: N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ).Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray.Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Table - 1 (900-1200mm dia x7500mm H) : Table as per required size made up 12mm MR plywood with necessary wooden/MS framing finished with 1.2mm laminate and 6mm thk corian cladding facia required sizes with floor levellers. The pedestal/exhibit to be grouted to the floor wherever necessary basis the load and stability of the exhibit and related interactions .Shape and size will differ as per exibit requirement during excecution. Object : Exhibit as per the description/ reference image/ link to be placed . ,

Name of the Exhibits: Seeing is Deceiving: What the exhibit says about: Our Vision can be manipulated, Mode of communication: Working exhibit with informative backlit panel, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/Internet point/Electrical point: N/A, Multimedia Content/ Software: N/A, Overall size of display and Exhibit: Overall size: 4' (L) x 4' (W) Circle: 3' dia, ELV: N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ).Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray.Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Object: Circular shaped base with moire pattern printed on it. Visitors can rotate the shape made of wood which is placed on a SS Pole.,

Mirror: Name of the Exhibits: You me and who else: What the exhibit says about: Two chambers with chairs facing each other divided by a half mirror in the center. Visitor is asked to aligh a nose tip while keeping all lights on. Then left side light is turned on in both chambers which creates an illusion of having half body of ourself is replaced with the half body of a person sitting in front. Another light is turned on and a book appears on the table which wasn't there before., Mode of communication: Working exhibit with informative backlit panel, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/Internet point/Electrical point: N/A, Multimedia Content/ Software: N/A, Overall size of display and Exhibit: Overall size: 4' (L) x 4' (W) x 6' (H), ELV: N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ).Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray.Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Base Structure: Material: MDF or plywood with a matte black finish for stability and visual focus. Chambers: Walls: Laminated MDF with an interior matte finish to minimize reflections. Chairs: Two ergonomic, fixed chairs aligned perfectly on each side for precise positioning. Mirror Mechanism: Half-Mirror (Beam Splitter Glass): Positioned at the center, dividing the two chambers, allowing partial reflection and transparency depending on lighting. Lighting: LED Lights: Adjustable RGB lights for each chamber, programmed to turn on/off in sequence. Hidden Light for Book Reveal: Mounted under the table surface to illuminate the hidden compartment when activated. Table: Material: Laminated MDF or acrylic, with a hidden mechanism to reveal the book. Control Mechanism: Microcontroller: To sequence the lighting and hidden book reveal. Switches: Buttons in each chamber for visitor interaction. Enclosure: Clear acrylic or tempered glass doors for safety and sound isolation. Educational Signage: Explains the science behind the illusion, including lighting effects, half-mirrors, and perception blending.,

Name of the Exhibits: Symmetry: What the exhibit says about: Mirrors are placed at right angle and once the object is placed at the corner, mirrors are reflecting the object in a symmetrical manner and a shape is formed., Mode of communication: Working exhibit with informative backlit panel, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/Internet point/Electrical point: N/A, Multimedia Content/ Software: N/A, Overall size of display and Exhibit: Overall size: 6' (L) x 6' (W), ELV: N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ).Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray.Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Table - 1 (1000-1200mm L x 1000-1200mm Bx7500mm H) : Table as per required size made up 12mm MR plywood with necessary wooden/MS framing finished with 1.2mm laminate and 6mm thk corian cladding facia required sizes with floor levellers. The pedestal/exhibit to be grouted to the floor wherever necessary basis the load and stability of the exhibit and related interactions .Shape and size will differ as per exibit requirement during excecution. Mirrors: Type: High-quality, polished glass mirrors with a silvered backing for sharp reflections. Placement: Two mirrors set at a precise 90° angle, securely mounted to the base with adjustable brackets for alignment. Frame and Support: Material: Aluminum or steel frames for holding mirrors securely. Protective edges to ensure visitor safety. Object Platform: Material: Laminated MDF or acrylic, placed at the corner where mirrors meet to hold demonstration objects. Enclosure: Material: Transparent acrylic or tempered glass sides for safety while allowing visibility. Lighting: Type: LED strip lights installed around the base or mirror edges to illuminate objects clearly. Educational Signage: Explains the principle of symmetry, reflection, and the geometry of shapes formed.,

Name of the Exhibits: See your back: What the exhibit says about: While standing in front of the mirror, you see your back instead of the front., Mode of communication: Working exhibit with informative backlit panel, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/Internet point/Electrical point: N/A, Multimedia Content/ Software: N/A, Overall size of display and Exhibit: Overall size: 4' (L) x 4' (W) x 7' (H), ELV: N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ).Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray.Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Base Structure: Material: Sturdy MDF or plywood base, coated with a matte black finish for a clean look. Mirrors: Primary Mirrors: Three high-quality polished mirrors arranged at specific angles to reflect the viewer’s back. Adjustable Mounts: Securely mounted on steel or aluminum brackets with fine-tuning options for proper alignment. Frame and Support: Material: Aluminum or steel framework to stabilize the mirrors and prevent movement. Enclosure: Material: Transparent acrylic or tempered glass for safety and durability, enclosing the mirrors. Lighting: Type: LED strip lighting positioned around the mirrors for clear and even illumination. Educational Signage: Provides an explanation of light reflection, mirror angles, and how the illusion works.,

Name of the Exhibits: Mirror Maze (Upgraded): What the exhibit says about: It is a maze that has mirrors for walls, which adds to the difficulty of a regular maze., Mode of communication: Working exhibit with informative backlit panel, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/Internet point/Electrical point: N/A, Multimedia Content/ Software: N/A, Overall size of display and Exhibit: , ELV: N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ).Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray.Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Existing exhibit to be repaired and upgraded,

Name of the Exhibits: Fun with Mirrors: What the exhibit says about: Multiple mirrors having different curved surfaces like concave, convex etc., Mode of communication: Working exhibit with informative backlit panel, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/Internet point/Electrical point: N/A, Multimedia Content/ Software: N/A, Overall size of display and Exhibit: Overall size: 2' (L) x 6' (H) Each, ELV: N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ).Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray.Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Object: Mirror of specified size and specification as per the description, framed inside a strong material like SS/ Wood with proper finish.,

Name of the Exhibits: Vanishing Image: What the exhibit says about: If you stand in front of the mirror, you'll see everything else except yourself., Mode of communication: Working exhibit with informative backlit panel, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/Internet point/Electrical point: N/A, Multimedia Content/ Software: N/A, Overall size of display and Exhibit: Overall size: 3' dia, ELV: N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ).Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray.Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Base Structure: Material: Sturdy MDF or plywood, coated with matte black paint for a professional finish. Mirrors: Type: Two-way mirror combined with a standard reflective mirror. Placement: Precisely angled to direct light and reflections, enabling the vanishing effect. Frame and Support: Material: Lightweight yet durable aluminum or steel framework for securing mirrors in place. Lighting System: Type: Adjustable LED lighting with a diffuse setting to control visibility and reflection dynamics. Enclosure: Material: Tempered glass or acrylic sides for protection and structural stability. Educational Signage: Provides insight into the science of two-way mirrors, light, and perception.,

Name of the Exhibits: True Image: What the exhibit says about: While in front of the mirror, real image of your self appears. Your left hand is on the left and everything in place., Mode of communication: Working exhibit with informative backlit panel, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/Internet point/Electrical point: N/A, Multimedia Content/ Software: N/A, Overall size of display and Exhibit: Overall size: 2' (L) x 2' (H), ELV: N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ).Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray.Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Base Structure: Material: MDF or plywood base, finished with a durable matte black or metallic coating for aesthetics and longevity. Mirrors: Type: Two mirrors of high-quality, optically polished glass. Placement: Precisely angled back-to-back at 90 degrees to create a true, non-reversed image of the viewer. Frame and Support: Material: Aluminum or stainless-steel framing to securely hold the mirrors in the required alignment. Enclosure: Material: Clear acrylic or tempered glass to protect the mirrors and ensure safety for visitors. Lighting: Type: LED strip lighting integrated along the mirror edges to enhance visibility and clarity. Educational Signage: Provides explanations on mirror reflections, symmetry, and how a "true image" differs from a regular mirror reflection.,

Name of the Exhibits: Floating Image: What the exhibit says about: Two mirrors are placed in rightangle, stand exactly while keeping center of your body aligned with the edge and you can see another half in the mirror. So if you lift your leg, you'll see that your are floating., Mode of communication: Working exhibit with informative backlit panel, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/Internet point/Electrical point: N/A, Multimedia Content/ Software: N/A, Overall size of display and Exhibit: Overall size: 4' (L) x 7' (H), ELV: N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ).Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray.Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Base Structure: Material: High-quality MDF or plywood for the base and support structure, finished with matte or glossy paint for a clean, professional look. Mirrors: Type: Two mirrors of optically polished glass or acrylic, mounted securely at a 90-degree angle. Size: Each mirror should be at least 4' (L) x 7' (H) to ensure that the full body of the viewer is captured. Frame and Support: Material: Lightweight aluminum or stainless-steel frame for added stability, ensuring the mirrors remain aligned at the correct angles for the floating effect. Lighting: Type: LED strip or spotlights placed around the mirrors to enhance visibility and accentuate the floating illusion. Soft lighting prevents reflection distractions while highlighting the central mirror alignment. Enclosure: Material: Transparent acrylic or glass sides to contain the exhibit, protecting the mirrors and keeping the viewing area clean and safe. Educational Signage: Provides explanations about how reflections and mirror positioning can create optical illusions, specifically focusing on the "floating" effect.,

Name of the Exhibits: Giant to dwarf: What the exhibit says about: 8'x4' acrylic with 4mm thick mirror is installed, top edge can slide creating two types of mirrors- Concave and Convex. In one mirror you appear fat and in another, slim., Mode of communication: Working exhibit with informative backlit panel, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/Internet point/Electrical point: N/A, Multimedia Content/ Software: N/A, Overall size of display and Exhibit: Overall size: 4' (L) x 8' (H), ELV: N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ).Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray.Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Mirror Panel: 8' x 4' acrylic mirror, 4mm thick, durable, and shatter-resistant. Sliding Mechanism: Smooth side-edge sliding system with locking positions to alternate between concave and convex shapes. Frame: Sturdy aluminum or powder-coated steel frame for stability, with mounting brackets. Base: 4' wide base with anti-slip rubber feet for support. Adjustable Curvature: Precision mechanism for controlled bending to achieve desired reflections. Educational Signage: Describes how mirror shapes affect reflections and explains light behavior. Safety Features: Rounded edges and protective coating to ensure visitor safety.,

Name of the Exhibits: What’s for Dinner?: What the exhibit says about: , Mode of communication: Working exhibit with informative backlit panel, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/Internet point/Electrical point: N/A, Multimedia Content/ Software: N/A, Overall size of display and Exhibit: Overall size: 6' (L) x 6' (W), ELV: N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ).Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray.Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Illusion Table: Constructed from wood or MDF with a high-gloss or laminate finish to blend with the exhibit design. Circular opening in the table center to accommodate the visitor’s neck comfortably. Table size: 6' (L) x 6' (W), with a platform height of 3'. Mirror Assembly: Dual mirrors (45° angle) mounted beneath the table to reflect surrounding surfaces, creating the illusion of a floating head. High-quality, distortion-free, silver-backed glass mirrors. Surrounding Decor: Platter design crafted from acrylic or lightweight metal, placed over the opening for a "serving tray" effect. Artificial food items and tableware fixed to the table for a realistic dining scene. Lighting: Overhead LED lighting focused on the table to enhance the illusion and eliminate shadows. Ambient lighting around the exhibit for consistent visibility. Safety and Comfort: Cushioned neck support around the table opening for visitor comfort. Smooth, rounded edges to prevent injury. Educational Panel: Wall-mounted or tabletop display explaining the mirror illusion and visual perception tricks. Durability Features: Sturdy aluminum or steel frame under the table for structural stability. Scratch-resistant and easy-to-clean materials for high-traffic usage.,

Magnetism: Name of the Exhibits: Why does magnet attract metal?: What the exhibit says about: Magnets transfer energy back and forth, making the pendulum swing in unpredictable ways., Mode of communication: Working exhibit with informative backlit panel, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/Internet point/Electrical point: Electrical Point, Multimedia Content/ Software: N/A, Overall size of display and Exhibit: Overall size: 3' (L) x 3' (W), ELV: N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ).Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray.Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Table - 1 (1000-1200mm L x 1000-1200mm Bx7500mm H) : Table as per required size made up 12mm MR plywood with necessary wooden/MS framing finished with 1.2mm laminate and 6mm thk corian cladding facia required sizes with floor levellers. The pedestal/exhibit to be grouted to the floor wherever necessary basis the load and stability of the exhibit and related interactions .Shape and size will differ as per exibit requirement during excecution. Standy: Pedestal/base structure In Acrylic with floor levellers and removable frame with mirror screws. The pedestal/exhibit to be grouted to the floor wherever necessary basis the load and stability of the exhibit and related interactions. Complete in all respects. Refer to typical details drawings of screen mounting and pedestals. Pendulum Setup: A strong, high-quality magnet (such as a neodymium magnet) suspended by a durable string or wire that allows free swinging motion. The pendulum’s motion will demonstrate chaotic behavior due to magnetic interactions. Magnetic field variations around the pendulum cause irregular oscillations, creating a visually intriguing chaotic path. Recording Surface: A phosphorescent or phosphor-coated paper placed underneath the pendulum’s path. This material absorbs the magnet's interaction with the surface and glows in the dark, recording the chaotic trajectory as the pendulum swings. Phosphorescent paper stores energy from the pendulum’s movement and emits it as light, leaving a glowing trail after each swing. Paper should be smooth, durable, and able to retain the magnetic field's pattern for an extended period. Magnetic Field Interaction: The setup may include other ferromagnetic objects around the pendulum to increase the chaotic effect by adding external magnetic fields.A magnetic shielding or adjustable current control may be incorporated to allow users to alter the field strength and see how the chaos changes.Ensure all magnets are securely fastened and protected by non-magnetic shielding to prevent accidental interference with nearby objects or people. The wire or string holding the pendulum should be robust enough to support the weight of the magnet and withstand repeated use without fraying. Educational Signage: Display information about chaotic motion, how magnetic fields influence pendulums, and how the observed chaotic path relates to mathematical principles of non-linear dynamics.,

Name of the Exhibits: How does the magnetic field affect metal formation?: What the exhibit says about: "Clouds" of iron particles dart and dance in a magnetic field., Mode of communication: Working exhibit with informative backlit panel, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/Internet point/Electrical point: N/A, Multimedia Content/ Software: N/A, Overall size of display and Exhibit: Overall size: 3' (L) x 3' (H), ELV: N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ).Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray.Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Table - 1 : Table as per required size made up 12mm MR plywood with necessary wooden/MS framing finished with 1.2mm laminate and 6mm thk corian cladding facia required sizes with floor levellers. The pedestal/exhibit to be grouted to the floor wherever necessary basis the load and stability of the exhibit and related interactions . Magnetic Field Simulation: Neodymium magnets or electromagnets that generate strong magnetic fields, suspended or placed within the exhibit. The magnets will be positioned in a way to simulate "clouds" or magnetic fields, which could be visualized through interactions with ferromagnetic particles, fine iron filings, or small magnetic beads. Interactive Elements: Users can manipulate the magnetic fields by either moving magnets (if on movable tracks) or adjusting electromagnets via touch-sensitive controls. Users will see the effects of these fields on magnetic particles suspended in a transparent medium (such as a glass or acrylic container), visually representing the dynamic and fluid nature of magnetic clouds. Visual Effects: Iron filings or magnetic fluid inside a transparent container, allowing the visitor to observe the formation of patterns that resemble magnetic clouds when magnets are brought near. These elements will demonstrate the force of the magnetic field and its ability to attract and manipulate particles, mimicking the complex shapes of magnetic clouds in space. Educational Signage: Informational panels explaining magnetic fields, magnetic clouds (such as those found in space or around planets), and their significance in astrophysics or Earth sciences. Possible interactive screens or touch panels allowing visitors to learn more about the science of magnetism and the real-world applications of magnetic clouds in technology and nature.,

Name of the Exhibits: Can temperature effect the magnetism?: What the exhibit says about: A piece of iron ordinarily will be attracted to a magnet, but when you heat the iron to a high enough temperature (called the Curie point), it loses its ability to be magnetized. Heat energy scrambles the iron atoms so they can’t line up and create a magnetic field—this Snack is a simple demonstration of this effect., Mode of communication: Working exhibit with informative backlit panel, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/Internet point/Electrical point: Electrical Point, Multimedia Content/ Software: N/A, Overall size of display and Exhibit: Overall size: 3' (L) x 3' (W) x 3' (H), ELV: N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ).Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray.Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Table - 1 (1000-1200mm L x 1000-1200mm Bx7500mm H) : Table as per required size made up 12mm MR plywood with necessary wooden/MS framing finished with 1.2mm laminate and 6mm thk corian cladding facia required sizes with floor levellers. The pedestal/exhibit to be grouted to the floor wherever necessary basis the load and stability of the exhibit and related interactions .Shape and size will differ as per exibit requirement during excecution. Standy: Pedestal/base structure In Acrylic with floor levellers and removable frame with mirror screws. The pedestal/exhibit to be grouted to the floor wherever necessary basis the load and stability of the exhibit and related interactions. Complete in all respects. Refer to typical details drawings of screen mounting and pedestals. Iron Sample: High-quality iron rod or strip, approximately 6 inches long and 0.5 inches wide, securely mounted for heating demonstration. Heating Element: Compact electric heating coil or blowtorch with safety enclosure, capable of reaching temperatures above the Curie point (~770°C). Magnet: Neodymium or ferrite magnet positioned near the iron sample to demonstrate magnetic attraction and loss. Frame and Enclosure: Powder-coated steel or aluminum housing with 3' x 3' footprint, incorporating heat-resistant materials. Safety Features: Transparent heat-resistant polycarbonate shield to protect visitors from direct heat. Insulated handles or controls to ensure safe operation. Temperature Monitoring: Digital or analog temperature gauge showing real-time heating levels of the iron sample. Control Panel: Simple interface for activating and deactivating the heating element, with built-in safety cutoff switch. Educational Panel: Illustrated explanation of the Curie point, magnetic properties, and atomic behavior during heating, mounted alongside the exhibit. Base and Stand: Stable, non-slip base with sufficient clearance from the heating element to ensure safety and prevent overheating of surrounding materials. Power Supply: Standard electrical connection with concealed wiring and appropriate safety certifications.,

Name of the Exhibits: Which hand acts faster?: What the exhibit says about: Two wooden sticks are struck up with the help of electromagnets and passes through the holes on the horizontal desk at 3.5 ft from the ground. Ther is a pedal switch which when pressed demagnetise the electromagnet and the sticks start falling simultaneously hitting the floor at the same time. Put your both the hands around the whole. press the foot pedal and the moment the sticks start falling try to hold them. you will find your one hand acts faster., Mode of communication: Working exhibit with informative backlit panel, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/Internet point/Electrical point: Electrical Point, Multimedia Content/ Software: N/A, Overall size of display and Exhibit: Overall size: 3' (L) x 3' (W) x 7' (H), ELV: N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ).Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray.Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Electromagnets: Two strong electromagnets, each approximately 4" in diameter, mounted horizontally under the desk. They should be powerful enough to lift and hold the wooden sticks in place but easily demagnetized by the foot pedal switch. Wires and Power: Electrical wiring connected to the electromagnets, managed safely under the desk. Requires a power source capable of providing enough current for the electromagnets to function reliably. Material: The electromagnets should have a steel or iron core to maximize magnetic strength, encased in a durable, heat-resistant plastic or metal housing. Wooden Sticks:Material: Wooden dowels or cylindrical sticks, approximately 18" in length, lightweight but sturdy enough to fall predictably when the electromagnet is deactivated. Finish: Sanded and polished smooth with a natural wood finish, ensuring no sharp edges. Placement: The sticks should be positioned vertically through holes in the horizontal desk, suspended by the electromagnets. Pedal Switch Mechanism:Material: Durable foot pedal switch made from metal or high-strength plastic, designed to withstand repeated use. Operation: When pressed, the pedal deactivates the electromagnets, allowing the sticks to fall. Location: Placed at the base of the exhibit, directly below the desk, within easy reach of the visitor standing. Feedback: The system should include an audible or visual cue (such as a light or sound) to indicate when the pedal is pressed. Desk with Holes:Material: A solid wooden or MDF desk with two precisely drilled holes to hold the sticks in place when magnetized. Dimensions: Holes approximately 1" in diameter, placed 3.5' from the ground, with enough clearance for the sticks to fall freely when released. Interactive Element (User Experience):Instructions: Clearly visible signage explaining the purpose of the exhibit and the physics behind the demonstration. It should guide the user to place their hands around the hole and press the pedal to initiate the stick's fall. Outcome: As the sticks fall, visitors will notice the difference in how their hands react to the falling sticks, teaching them about human reflexes and how our body reacts to visual cues versus our body's natural response times. Safety Features:Magnetic Shielding: All electromagnets should be safely shielded to prevent any magnetic interference with nearby electronics or harmful effects on sensitive objects. Stable Foot Pedal: The foot pedal must be anchored firmly to prevent slipping or tipping during operation. Educational Signage:Explanation: Describes how electromagnets work, the mechanics of falling objects under gravity, and how human reaction times can vary between each hand. The exhibit should also briefly explain how reflex speed is often faster with a dominant hand and how the experiment demonstrates this.,

Name of the Exhibits: Understand Thermal Energy and Statistical Mechanics: What the exhibit says about: Brownian motion is the random, uncontrolled movement of particles in a fluid as they constantly collide with other molecules. An exhibit with balls inside the case and force is given through the button to create movement in the balls., Mode of communication: Working exhibit with informative backlit panel, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/Internet point/Electrical point: N/A, Multimedia Content/ Software: N/A, Overall size of display and Exhibit: Overall size: 3' (L) x 3' (W), ELV: N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ).Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray.Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Table - 1 (1000-1200mm L x 1000-1200mm Bx7500mm H) : Table as per required size made up 12mm MR plywood with necessary wooden/MS framing finished with 1.2mm laminate and 6mm thk corian cladding facia required sizes with floor levellers. The pedestal/exhibit to be grouted to the floor wherever necessary basis the load and stability of the exhibit and related interactions .Shape and size will differ as per exibit requirement during excecution. Balls: Lightweight, multi-colored spheres (foam or plastic) representing particles. Vibration Mechanism: Electric motor with an adjustable vibration plate, activated via a push-button. Control Button: User-friendly, illuminated push-button for initiating motion. Frame: Powder-coated steel or aluminum base for stability and durability. Lighting: Energy-efficient LED strips for clear visibility of the motion. Educational Panel: Description of Brownian motion and its significance in fluid dynamics. Safety: Enclosure secured to prevent accidental access to moving parts.,

Name of the Exhibits: Chemistry Lab: What the exhibit says about: On hand experiment chemistry lab for school students on pre-registration basis. Experiments shall be shown by a teacher., Mode of communication: Seating arrangement of approx. 25 students, stage with working desk with lab equipments for teacher to show demo experiments. Working desk shall include water supply, gas supply, Sink for chemical use and separate drain system., Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/Internet point/Electrical point: N/A, Multimedia Content/ Software: N/A, Overall size of display and Exhibit: , ELV: N/A, Info display/Signage : N/A, Material Treatment and Finishes : Objects: Requird 10no. SS Tables (2'-6" x 5'), Chemistry equipments sufficient for teacher to experiment. SS Benches (3 seater) for 25 pax capacity etc.,

Item Description

Biology: Name of the Exhibits: What are we made of?: What the exhibit says about: An exhibit showcasing the structure and function of cells, including interactive models of cell membranes, organelles, and DNA. , Mode of communication: , Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/Internet point/Electrical point: Data + Electrical, Multimedia Content/ Software: N/A, Overall size of display and Exhibit: Overall size: 4' (L) x 4' (W), ELV: N/A, Info display/Signage : ____, Material Treatment and Finishes : Table - 1 (1000-1200mm L x 1000-1200mm Bx7500mm H) : Table as per required size made up 12mm MR plywood with necessary wooden/MS framing finished with 1.2mm laminate and 6mm thk corian cladding facia required sizes with floor levellers. The pedestal/exhibit to be grouted to the floor wherever necessary basis the load and stability of the exhibit and related interactions .Shape and size will differ as per exibit requirement during excecution. Standy: Pedestal/base structure In Acrylic with floor levellers and removable frame with mirror screws. The pedestal/exhibit to be grouted to the floor wherever necessary basis the load and stability of the exhibit and related interactions. Complete in all respects. Refer to typical details drawings of screen mounting and pedestals. Interactive Model: 3D representation of a cell made from high-quality resin or FRP, featuring labeled organelles (e.g., nucleus, mitochondria, ribosomes). Backlit Illumination: LED lighting embedded in organelle models, activated via user-friendly push-buttons to highlight specific parts. Control Panel: Interactive buttons with descriptive labels for each cell part, made from durable plastic or metal. Protective Covering: Transparent acrylic or tempered glass to safeguard the model while allowing clear visibility. Educational Graphics: Laminated or digital panel describing cell structure and functions. Power System: Low-voltage LED-compatible power supply for lighting and buttons. Safety: Child-safe design with smooth edges and secure components.,

Name of the Exhibits: Microscopic Worlds: What the exhibit says about: An exhibit featuring microscopes and digital displays showcasing various microorganisms, cells, and tissues, highlighting the diversity of microscopic life., Mode of communication: Working exhibit with informative backlit panel, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : 2no. 24" LED Display Panel, Audio : N/A, Data point/Internet point/Electrical point: Data + Electrical, Multimedia Content/ Software: Microscopic world photos playing in loop, Overall size of display and Exhibit: Overall size: 6' (L) x 4' (W), ELV: 24 250 Full HD DVI, 2xHDMI, RJ45, LAN, 2x USB Port, Tizen 3.0 Operating System, 8 GB Internal Storage,Speakers (10W +10W),wifi for Mirroring, RS232C, Info display/Signage : ____, Material Treatment and Finishes : Table - 1 (1000-1200mm L x 1000-1200mm Bx7500mm H) : Table as per required size made up 12mm MR plywood with necessary wooden/MS framing finished with 1.2mm laminate and 6mm thk corian cladding facia required sizes with floor levellers. The pedestal/exhibit to be grouted to the floor wherever necessary basis the load and stability of the exhibit and related interactions .Shape and size will differ as per exibit requirement during excecution. Standy: Pedestal/base structure In Acrylic with floor levellers and removable frame with mirror screws. The pedestal/exhibit to be grouted to the floor wherever necessary basis the load and stability of the exhibit and related interactions. Complete in all respects. Refer to typical details drawings of screen mounting and pedestals. Microscope Replicas: Two realistic, scaled replicas of microscopes made of lightweight, durable materials such as ABS plastic or aluminum, designed for interaction. LED Displays: Two high-resolution LED panels (approximately 20-24 inches) embedded into the table, flush-mounted for ergonomic viewing. Interactive System: Digital imaging system connected to the microscope replicas, simulating real microscopic views of prepared slides (preloaded visuals). Protective Covering: Tempered glass or acrylic over the LED panels for durability and protection. Educational Graphics: Laminated or digital display panels on the table explaining microscopic worlds, cellular structures, and microorganisms. Lighting: Integrated ambient LED lights for enhanced visibility. Power System: Concealed wiring with a low-voltage power supply for LEDs and interactive components. Safety Features: Rounded corners and child-friendly materials to ensure visitor safety.,

Name of the Exhibits: What’s water made of?: What the exhibit says about: Applied Physics in Chemistry An exhibit demonstrating the process of electrolysis, where electricity is used to split water into hydrogen and oxygen gases. , Mode of communication: Working exhibit with informative backlit panel, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/Internet point/Electrical point: Data + Electrical, Multimedia Content/ Software: N/A, Overall size of display and Exhibit: Overall size: 4' (L) x 4' (W) x 4' (H), ELV: N/A, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ).Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray.Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Table - 1 (1000-1200mm L x 1000-1200mm Bx7500mm H) : Table as per required size made up 12mm MR plywood with necessary wooden/MS framing finished with 1.2mm laminate and 6mm thk corian cladding facia required sizes with floor levellers. The pedestal/exhibit to be grouted to the floor wherever necessary basis the load and stability of the exhibit and related interactions .Shape and size will differ as per exibit requirement during excecution. Electrolysis Chamber:Transparent acrylic tank (6" x 6" x 6") for water containment. Electrodes made of stainless steel or platinum-coated titanium for durability. Power Supply:DC power source with variable voltage (up to 12V) and amperage control. Safety circuit with an automatic shut-off timer (max 3 minutes per cycle). Gas Collection:Two graduated glass tubes (2" diameter x 10" height) for collecting hydrogen and oxygen gases. Secure mounting for visibility and safety. Interactive Controls:Touch panel to adjust voltage and observe variations in gas production. Real-time data display of current, voltage, and gas volume measurements. Educational Display:Infographics on the electrolysis process, chemical equations, and applications of hydrogen and oxygen. Enclosure:Powder-coated aluminum frame (3' x 3') with a polycarbonate safety shield. Water and Electrolyte System:Distilled water with a small amount of electrolyte (e.g., NaOH or H2SO4) for efficient electrolysis. Drain and refill system for maintenance. Safety Features:Insulated electrode connections. Ventilation system to prevent gas buildup. Secure grounding and protection against electrical surges. Lighting:LED backlighting for enhanced visibility of the gas collection process. ,

Name of the Exhibits: Loop the loop: What the exhibit says about: Example of conservation of energy. The three types of energy that we will be considering are: Work, Potential Energy, and Kinetic Energy. , Mode of communication: Working exhibit with informative backlit panel, Exhibit Type : Interactive, Multimedia hardware requirements and Desired size : N/A, Audio : N/A, Data point/Internet point/Electrical point: N/A, Multimedia Content/ Software: N/A, Overall size of display and Exhibit: Overall size: 6' (L) x 4' (W) x 6' (H)', ELV: -, Info display/Signage : Designing, Providing and Installation of 8mm thk toughened glass Info -Graphic glass panel of size 600mm x 1200mm mounted on gallery interior walls fixed with the necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware, inclusive of custom designed Printed text and graphics Printed text and graphics as per requirement of the gallery design and conceptual design given by the Architect / consultant. Graphic to be printed on Optically Clear Vinyl Film and the thickness of 2 mil (0.05mm) without adhesive and 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of 5 pounds/inch at 73°F (0.9 kg/cm at 23°C ).Printed film to be overlaminated with Translucent Vinyl Film for backlit purpose with appropriate LED light fixture with drivers and all necessary wooden / ply boxing with necessary wooden / ply boxing with necessary wooden / ply boxing with necessary hardware. The Backlit boxing should be able to diffuse sharp LED glare from light fixtures. Content and panel design needs to be approved by Architect / consultant before production. All prints will be done 1/32” - 1/8” from the edge of the glass to prevent contamination and consequential defects resulting from overspray.Sample Print from vendor is mandated with high quality image from reliable source (min. 3000 pixels ) for the best results, quality Checked in Photoshop at 100percentage scale @ 72 dpi (proportionate to actual size desired)., Material Treatment and Finishes : Base (9.0 sqmt): Required shape and size stage with fabrication work for levelling of stage ht up to150-300 mm as per exhibit requirment finished with structure ply and Vinyl / Laminate flooring material finish. Facia finish with wooden beading matching with paint including concealed LED lighting etc complete . (Refer BOQ No. 7.11) Shape and size will differ according to Exhibit Requiremnt during excecution. Track Framework: Stainless steel or powder-coated aluminum track for durability and smooth movement. Loop diameter of 2' with gradual curves for seamless energy transition. Mounted on a stable steel base with anti-slip rubber padding. Rolling Object: High-density rubber or acrylic ball (4" diameter) for consistent rolling. Ball mass and size optimized to demonstrate energy conversion effectively. Energy Demonstration Features: Starting ramp with height adjustments (up to 4') to showcase potential energy variations. Gradation markings along the track for position and height visualization. Interactive Controls: Adjustable release mechanism to vary initial height and speed. Buttons to reset the ball and repeat the demonstration. Educational Panels: Infographics explaining conservation of energy, potential energy, kinetic energy, and work. Real-time energy level indicators (LED displays) powered by sensors along the track. Enclosure: Transparent acrylic casing for safety while maintaining visibility. Openable sections for maintenance access.,

Annual Maintenance Contract Services ( AMC) for Exhibits : Hall of Space , Exhibits : Hall of Science , Exhibits : Outdoor and Immersive Dome : All inclusive comprehensive annual maintenance contract for 5 years as per Exhibit manual and Scope of work .