SPECIAL REPAIRING WORK FOR BAPUNAGAR POLICE STATION (G+1),B-32 PSQ BAPUNAGAR POLICE LINE & RAKHIYAL POLICE STATION (G+1) AT AHMEDABAD.(INCLUDING ELECTRICAL WORK) (First attempt)

Description QUANTITY Unit RATE IN WORD Amount

Dismentling doors, windows, ventilators etc.(wood or steel) shutters including chowkhats architraves, 1.00 NO 185.85 Rs. One Hundred Eighty

holdfasts and other attachment etc. complete and stacking them within all lead and lift.(i) Not Five & Paise Eighty Five

exceeding 3 Sq.M. in area. Only

Dismantling santtary fittings like wash basin .W.C. pan Indian and European type, flushing tank etc. 1.00 NO 401.63 Rs. Four Hundred One &

2 Paise Sixty Three Only

including stacking the materials with all lead and lift.

Dismentaling of tile or stone floor slaid in mortar incl. stacking of servicable material and disposal of 13.00 SMT 47.25 Rs. Forty Seven & Paise

3 unservicable material with disposing all lead and lift. Twenty Five Only

Filling In Foundation & Plinth With Murrum Or Selected Soil In Layers Of 20Cms Th. 8.00 CUM 286.20 Rs. Two Hundred Eighty

4 Six & Paise Twenty Only

FILLING in plinth with SAND under floors including watering, raming consolidating and dressing etc. 4.00 CUM 455.63 Rs. Four Hundred Fifty

5 complete. Five & Paise Sixty Three

Applying general insecticide pest control treatment to floors, cupboards etc including labour material 39.00 CUM 88.40 Rs. Eighty Eight & Paise

etc. complete. Using Imidacloprid 30.5 SCas as Per 6313part -II (0.075 % concentration by mass) is Forty Only

recommended 10.5 ml chemical diluted with 5 litres of water application 0.5 litre chemical/Sqm if

surface is recommended as per I.S.

Providing and laying cement concrete 1:4:8 (1- Cement : 4- coarse sand : 8- hand broken stone 4.00 CUM 2653.67 Rs. Two Thousand Six

aggregates 40 mm nominal size) and curing complete excluding cost of formwork in (A) Foundation Hundred Fifty Three &

and Plinth Paise Sixty Seven Only

Provinding and Laying controlled cement concrete M-150 including finising smooth with curing 6.00 CUM 3923.27 Rs. Three Thousand Nine

complete excluding the cost of form work but excluding the cost of reinforced concrete work in Hundred Twenty Three &

foundation FOOTING and Mass Concrete for grid slab Paise Twenty Seven Only

Providing T.M.T, FE - 500D Bar Reinfor Cement for R.C.C.work including cutting, bending, binding 107.00 KG 75.46 Rs. Seventy Five & Paise

9 and placing in position etc.complete for All Floors. (Brand as approved by GSPHC) Forty Six Only

Description QUANTITY Unit RATE IN WORD Amount

Providing,fabrication and fixing M.S. Grill / GATE of approved pattern fabricated from M.S. flats,square 60.00 KG 74.92 Rs. Seventy Four & Paise

bars,round bars,C channel ,square/round box pipe as per detail drawings.Rate is inclusive of welding Ninety Two Only

with griding and applying of mild steel putty with hardener into groove to have smooth surface,two

coats of oil paint and one coat of yellow zinc chromate primer coat of approved brand only.oil paint

shall be luxol enamel paint of berger paint india limited or asian paint apcolite premium gloss enamel

of asian paint or dulux premium gloss enamel of dulux paint and nerolac sythetics enamel of nerolac

paint for all foor and at any height only.M.S Grill/Gate material should

be ISI mark only.

Brick work using common burnt clay building bricks having crushing strength not less than 35 4.00 CUM 4253.46 Rs. Four Thousand Two

Kg/Sq.cm.in superstructure above plinth up to floor two level in conventional bricks in cement mortar Hundred Fifty Three &

11 1:6(1-cement;6-fine sand) for Ground Floor. Paise Forty Six Only

Brick work using common burnt clay building bricks having crushing strength not less than 35 1.00 CUM 4293.25 Rs. Four Thousand Two

Kg/Sq.cm.in superstructure above plinth up to floor two level in conventional bricks in cement mortar Hundred Ninety Three &

1:6(1-cement;6-fine sand) for First Floor. Paise Twenty Five Only

Provinding 10 mm thick cement PLASTER in single coat on CEILING for interior plastering and 7.00 SMT 199.88 Rs. One Hundred Ninety

Nine & Paise Eighty Eight

13 finished even and smooth in C.M. 1:3 ( 1 cement : 4 sand ) including finishing with floating coat of neat

cement at Ground Floor.

Provinding 15 mm thick cement PLASTER in single coat on BRICK or CONCRETE wall for interior 15.00 SMT 203.34 Rs. Two Hundred Three &

plastering and finished even and smooth in C.M. 1:4 ( 1 cement : 4 sand ) including finishing with Paise Thirty Four Only

floating coat of neat cement slurry at GROUND FLOOR.

Providing 20 mm thick double coat malacement plaster on interior brick / concrete work for plastering 67.00 SMT 297.68 Rs. Two Hundred Ninety

comprising of base coat of 12 mm thick cement plaster in cement mortar (1 Cement : 4 coarse sand) in Seven & Paise Sixty Eight

rough finishing and 8 mm thick top coat of cement mortar 1:2 (1 Cement : 2 Coarse sand) finished with Only

trovel including scaffolding curing etc. complete.

Providing and laying 25mm thick DIAMOND polished KOTA STONE SLAB FLOORING over 25mm 39.00 SMT 982.83 Rs. Nine Hundred Eighty

average thick base of cement mortar 1:6 ( 1 cement : 6 coarse sand) laid over & jointed with grey Two & Paise Eighty Three

cement slurry including rubbing & polishing etc. Complete. Only

Providing and laying 25 mm thick Diamond polished KOTA STONE SLAB in RISERS of steps, dedo , 3.00 SMT 1176.03 Rs. One Thousand One

skirting and pilllars laid to 10 mm thick cement mortar 1:3 ( 1 cement : 3 coarse sand) & jointed with Hundred Seventy Six &

grey cement slurry including rubbing & polishing etc. Paise Three Only

Providing and laying Anti skid Ceramic tiles (Non Skiding) 8 mm to 10mm thick in Floorings, treads of 5.00 SMT 960.47 Rs. Nine Hundred Sixty &

steps and landing laid on a bed of 20 mm thick cement mortar 1:3 (1 - cement: 3- coarse sand) finished Paise Forty Seven Only

with flush pointing in the colour as specified etc. complete in white cement for All Floors. Size and

18 shade shall be as per the instruction of Engineer - In - Charge. The tile size shall be 600mm x 600mm.

Description QUANTITY Unit RATE IN WORD Amount

Providing and laying Ceramic tiles 8 mm to 10mm thick in skirting, risers of steps and DADO on 10mm 33.00 SMT 1426.95 Rs. One Thousand Four

thick cement mortar 1:3 (1-cement: 3 coarse sand) finished with flush pointing in the colour as Hundred Twenty Six &

specified etc. complete in white cement for All Floors. Size and shade shall be as per the instruction of Paise Ninety Five Only

Engineer - In - Charge. The Tile size shall be 600mm x 300mm.

Providing and fixing both side polished machine cut KOTA STONE shelve/ partition 20mm to 25mm 539.00 SMT 793.90 Rs. Seven Hundred Ninety

thick embaded in to wall at support including racking and finishing smooth the surface including Three & Paise Ninety Only

20 cutting the stone as and where required etc. complete including rounding of exposed edges etc.

Finishing Ceilling/Slop Surface with Plastic Emulsion Paint on Ceilling/Slop Surface (two coats) to give 47.00 SMT 186.73 Rs. One Hundred Eighty

an required shap even shade after throughly brushing the surface to remove all dirt and remains of Six & Paise Seventy Three

loose poweder material etc. complete. Rate are inclusive of applying two coat of lapy (Putty) and one Only

coat of primer on new Ceilling/Slop Surface to give and even shade including thoroughly brushing the

21 surface free from mortar dropping and other foreign matter and sand papered smooth.

Finishing Wall with Plastic Emulsion Paint on Wall Surface (two coats) to give an required shap even 123.00 SMT 176.33 Rs. One Hundred Seventy

shade after throughly brushing the surface to remove all dirt and remains of loose poweder material Six & Paise Thirty Three

etc. complete. Rate are inclusive of applying two coat of lapy (Putty) and one coat of primer on new Only

wall surface to give and even shade including thoroughly brushing the surface free from mortar

22 dropping and other foreign matter and sand papered smooth. putty , primer and paint make as per the

approved list of GSPHCL.

Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) over and above 67.00 SMT 147.68 Rs. One Hundred Forty

applying One Coat Of Primer to give an required shape even shade after thoroughly brushing the Seven & Paise Sixty Eight

surface to remove all dirt, and remains of loose powdered materials.etc complete. primer and paint Only

make as per the approved list of GSPHCL

Providing and fixing solid PVC Flush Door shutter 24mm thick,made from Co-extruded three layer rigid 2.00 SMT 4476.00 Rs. Four Thousand Four

PVC foam sheet(single Extruded) with density not less than 600kg/cbm outer layer (0.8-1mm)thick Hundred Seventy Six Only

should be rigid PVC with density of not less than 1400kg/cbm. Door should be water proof,Termite

proof ,fire retardant&having good screw holding capacity.proviidng and fixing 100% Solid Wood Plastic

composite(WPC) Door Frame 90mmx45mm made from wood plastic composite(single Extruded

Process)material with density 780kg/cbm .all as per specifications drawing as directed by the engineer

Providing and fixing standard extruded of alluminium section of size 63 * 38.10 * 1.2 mm,@Wt 0.643 2.00 SMT 1163.92 Rs. One Thousand One

Kg/RMT )with colour aNOdized alluminium frame for ventilation with 5 mm thick frosted glass as Hundred Sixty Three &

details etc complete FOR VENTILATION Paise Ninety Two Only

Description QUANTITY Unit RATE IN WORD Amount

Providing & Fixing to Wall Ceilling and Floor SWR (Type A) Rain Water pipe as Per IS-13592 of 90mm 288.00 RMT 323.15 Rs. Three Hundred Twenty

Dia. Complete with Special Flings, vent cowl, Compressor type Fittings like G.I. Slotted Z patti of 16 Three & Paise Fifteen Only

Gauge (minimum1.60mm thick) and minimum 6mm dia. U Clamp with Washer Nut at every 1.50mt.

vertical distance including All Labour Charges etc. complete including making good the Ceilings,

Floors and on terrace. Rain water pipe shall be 90 mm Dia. SWR horizontal pipe and vertical pipe and

90mm bend at the end near by Ground level. Rate are Inclusive of all Necessary Fittings required for

Providing and Fixing concealed centre point to wall ceiling and floor CPVC ( SDR 13.5) poipe having 4.00 RMT 202.97 Rs. Two Hundred Two &

National sanitation foundation ( NSF) seal for potable water of following dia. Nominal bore tube fittings Paise Ninety Seven Only

and clamps including, making good the wall,ceiling and floor etc complete.Pipe shall be concealed or

27 open as per mentioned in tender description.Pipe shall be approved make of GSPHCL list (20 mm

Providing and Fixing concealed centre point to wall ceiling and floor CPVC ( SDR 13.5) poipe having 4.00 RMT 247.25 Rs. Two Hundred Forty

National sanitation foundation ( NSF) seal for potable water of following dia. Nominal bore tube fittings Seven & Paise Twenty Five

and clamps including, making good the wall,ceiling and floor etc complete.Pipe shall be concealed or Only

28 open as per mentioned in tender description.Pipe shall be approved make of GSPHCL list (25 mm

Providing and fixing concealed or open center point to wall ceiling & floor CPVC (SDR 13.5) PIPE 5.00 RMT 437.66 Rs. Four Hundred Thirty

having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube Seven & Paise Sixty Six

fittingswith Z patti (Minimum 1.6mm thick) with 6mm Dia U Clamp with washer for Vertical water supply Only

pipe. Pipe shall be concealed or open as mention in tender description. Pipe shall be as per approved

make of GSPHCL make list (40 mm inside dia).

Provinding and fixing gun metal check or non return full way WHEEL / HANDLE VALVE Rate are 8.00 RMT 656.86 Rs. Six Hundred Fifty Six &

inclusive of all matreials, Labour & Necessary Fittings etc. Complete as per Detailed Drawings, Paise Eighty Six Only

Specifications and as per the Instruction of Engineer In charge. All material used as per approved

make list by GSPHCL. (40 mm inside dia).

Providing & Fixing Urinal with P.V.C water pipe, 32mm dia. C.P. brassa waste coupling with Connection 2.00 NO 2098.98 Rs. Two Thousand Ninety

32mm dia waste Pipe etc. Complete. Rate are inclusive of all matreials, Labour & Necessary Fittings Eight & Paise Ninety Eight

etc. Complete as per Detailed Drawings, Specifications and as per the Instruction of Engineer In Only

charge. The Model & Make of Urinal Shall be as per the Approved Make List of GSPHCL.

Description QUANTITY Unit RATE IN WORD Amount

Providing & Fixing Wall Hung with PVC Flush Tank, Soft Seat Cover & intergal "P" or "S" Trap 1.00 NO 5470.90 Rs. Five Thousand Four

including Jointing the Trap with Pan and Soil pipe. Wall hung shall be fixed on S.S heavy duty rack bolt Hundred Seventy & Paise

having 16mm dia, 165mm length using Plastic sleeve Make by Using Drill Bitt Only. Rate are inclusive Ninety Only

of all matreials, Labour & Necessary Fittings etc. Complete as per Detailed Drawings, Specifications

32 and as per the Instruction of Engineer In charge. The Model & Make of Wall Hung & Flush Tank Shall

be as per the Approved Make List of GSPHCL.

Providing & Fixing Single Hole Wash Basin with C.I or M.S. brackete & M. I. fisher union, P.V.C water 1.00 NO 3935.33 Rs. Three Thousand Nine

pipe with Connection from Stop Cock to Pillar Tap, PVC Bottle Trap with Connection 32mm dia. C.P. Hundred Thirty Five &

brassa waste coupling etc. Complete. Rate are inclusive of all matreials, Labour & Necessary Fittings Paise Thirty Three Only

etc. Complete as per Detailed Drawings, Specifications and as per the Instruction of Engineer In

33 charge. The Model & Make of Wash Basin Shall be as per the Approved Make List of GSPHCL.

including pillar cock, angel cock, bottale trap

Providing & Fixing 15mm One way Bib Tap with Wall Flange. Rate are inclusive of all matreials, Labour 5.00 NO 990.61 Rs. Nine Hundred Ninety &

& Necessary Fittings etc. Complete as per Detailed Drawings, Specifications and as per the Instruction Paise Sixty One Only

34 of Engineer In charge. The Model & Make of Bib Tap Shall be as per the Approved Make List of

Providing & Fixing Two way Bib Tap with Wall Flange. Rate are inclusive of all matreials, Labour & 2.00 NO 1309.39 Rs. One Thousand Three

Necessary Fittings etc. Complete as per Detailed Drawings, Specifications and as per the Instruction of Hundred Nine & Paise

35 Engineer In charge. The Model & Make of Two way Bib Tap Shall be as per the Approved Make List of Thirty Nine Only

Providing & Fixing Health Faucets (ABS Body). Rate are inclusive of all matreials, Labour & Necessary 2.00 NO 565.51 Rs. Five Hundred Sixty

Fittings etc. Complete as per Detailed Drawings, Specifications and as per the Instruction of Engineer Five & Paise Fifty One Only

36 In charge. The Model & Make of Health Faucets Shall be as per the Approved Make List of GSPHCL.

Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 75 mm diameter with jali of the following 3.00 NO 552.83 Rs. Five Hundred Fifty Two

nominal diameter of self cleansing design with C.I scread down or hinged grating including the cost of & Paise Eighty Three Only

cutting and making good the walls.

38 MAKING CONNECTION IN EXISTING MAIN HOLE 2.00 NO 1000.00 Rs. One Thousand Only

Making connection to exsting WATER SUPPLY line including nessesary jointing material and finishing 1.00 NO 1472.20 Rs. One Thousand Four

39 etc. complete Hundred Seventy Two &

Paise Twenty Only

Description QUANTITY Unit RATE IN WORD Amount

Providing & Laying integrated cement based proprietary water proofing treatment of required 59.00 SMT 855.11 Rs. Eight Hundred Fifty

thickness over the roof including 10mm thick cement mortar 1:3 and CHINA MOSAIC fitting and finally Five & Paise Eleven Only

finishing the surface with white cement slurry and sloping out terrace slabs withFollowing

specification laid to required slope not flatter than 1:80 ( the thickness of water proofing treatment near

rainwater outlet or the lowest point of the finished slope shell not to be less than 45 mm. Including

treating the vertical surface of the parapet wall up to 20 cm. height above finished level of terracing

including finishing top with joint less water proofing plaster curing testing etc, completed. Rate is

Including 10 years performance of guarantee bond to be given on stamp paper ( no extra shall be paid

40 for increase in thickness for proper slope ). (A) Applying & grounting a slurry coat of neat cement

using 2.75 kg/smt. of cement admixed with proprietary water proofing compound confirming to IS

and 10mm. Thick water proofing cement plaster in cement mortar in 1:3.over the RCC slab including

cleaning the surface before treatments.

(B) Laying cement concrete using broken brick bat using 25 mm to 40 mm size with 50% of cement

mortar 1:4 ( 1 cement : 4 corse sand )over 10mm. thick water proofing cement plaster in cement mortar

in 1:3 admixed with proprietary water proofing compound conforming to IS 2645 required slope and

treating similarly the adjoining walls up to 200 mm height including rounding of junction of walls.

(C) After two days of proper curing applying a second coat of cement slurry .

(D) Finishing the surface with china mosaic peices laid on 10 mm thick joint less cement mortar of mix

1:3 ( 1 cement : 3 sand) admixed with proprietary water proofing compound confirming to IS 2645 and

finally finishing the surface with trowel with neat cement slurry .

(E) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for .

curing for final test. All above operation to be done in order and as directed and specified by the

engineer in charge.

Description QUANTITY Unit RATE IN WORD Amount

Polymer Modified Mortar (Pre-Packed): 20.00 SMT 4614.27 Rs. Four Thousand Six

Providing and Applying single component, high strength, fibre reinforced, thixotropic cementitious Hundred Fourteen & Paise

patch repair mortar that achieves compressive strength minimum of 15 MPa at 1 day and 45 MPa at 28 Twenty Seven Only

days and capable of applying upto 50mm thick in single layer such as Renderoc SP40 of Fosroc or

Master Emaco S 348 or Shalifix FRM 50 of BASF make or equivalent, to the prepared concrete area for

thickness up to 50mm, after applying epoxy resin based bonding coat as per manufacturer’s

specification, before the bonding agent becomes tack free, initially by hand and finally finishing the

41 same with trowel carefully compacting the same around the rebar and finishing to bring it in line with

existing concrete surface on the columns, slabs, beam etc. at all heights, where the thickness of

application is less than 50 mm in patches as per specification . Item rate is inclusive of all material,

labour, tools, temporary supports for structures, plant and machineries, curing etc. complete and as

directed by Engineer-in-charge and/or consultant.

(Payment to be made in Sq.M for thickness upto 50mm of PMM for patch area repaired)

Providing & Erecting Point wiring with 1.1 KV grade ISI marked 2 X 1.5 sq. mm copper PVC insulted 15.00 Point 468.00 RS: Four Hundred

FRLSH wire with 1.5 sq. mm (green) copper PVC insulated FRLSH wire for earth continuity in existing Sixty Eight only

pipe with approved make 5/6 Amp. ISI make modular type switch and accessories mounted in 20 G. G.I.

company fabricated metallic box covered with appropriate front plate modules erected on wall / ceiling

with necessary modular lamp holder / modular ceiling rose / HD Connector (make and model approved

to be approved by EIC) as directed for open/concealed SB wiring.Length of point wiring must not

42a increase than 10 mtr. For that necessary switch boards and their locations must be finalised before

execution by agency otherwise payment will not be done for extra long point. (For future extention, if

required, agency has to erect one higher size metal box and modular plate as per instruction of EIC.

Cost of blank plate shall be paid as per tender item) [Wire must be having box packing in existing pipe

erected flushed on wall/ceiling complete Light point. Cat.-III.

Necessary sheet / tape / polythene / sand must be erected or filled in all box to prevent mortar going

into the box. Length of point wiring must not increase than 10 mtr. For that necessary switch boards

and their locations must be finalised before execution by agency otherwise payment will not be done

for extra long point. (For future extention, if required, agency has to erect one higher size metal box

and modular plate as per instruction of EIC. Cost of blank plate shall be paid as per tender item) [This

item include cleaning (inside/outside) of all G.I. switch boards, electric point box, fan box, MCBDB &

box cutting plaster finishing for modular plate without any gap] [conductor resistance should be as per

For Secondary Light Point Cat-III ( in existing pipe) 5.00 Point 106.00 RS: One Hundred Six

For separate Point (with 6 Amp. Switch & 5 pin socket both having ISI Make) Cat-III ( in existing pipe) 2.00 Point 485.00 RS: Four Hundred

42c Eighty Five only

For Looped on switch board (with 6 Amp. Switch & 3/5 pin socket) (Cat-III) ( in existing pipe) 5.00 Point 321.00 RS: Three Hundred

42d Twenty One only

Description QUANTITY Unit RATE IN WORD Amount

Providing and fixing Plug Point wiring with 1.1 KV grade ISI marked approved make 2 x 2.5 sq.mm 2.00 Point 662.00 RS: Six Hundred Sixty

copper PVC insulated FRLSH wire with 1.5 sq.mm (green) copper PVC insulated FRLSH wire for earth Two only

continuity in FIA approved ISI mark in existing pipe with PVC fitting fixed with adhesive solution

erected in wall/slab along with continuous G. I. fish wire to draw wires and laid in approved manner

zari for PVC pipe & boxes shall be filled with cement mortar & finishing the surface to match the wall /

43 ceiling complete with 16 Amp Modular type Swich and accessories mounted in 20 G. GI company

fabricated metallic box covered with appropriate front plate modules erected flushed with wall. For

Amp. Indicator switch & 1 No. 6/16 A universal socket white colour suitable for 3/5 pin top duly both

having ISI mark. (Necessary sheet / tape / polythene / sand must be erected or filled in all box To

Prevent Mortor Going In To The Box) Cat.-III. (Conductor resistance should be as per IS:8130/1984)

Providing and erecting Medium Class FIA approved and ISI mark white colour (embossed) RIGID PVC 100.00 Mtr. 24.00 RS: Twenty Four

PIPES of following size complete erected with necessary PVC fittings & Junction boxes fixed with only

44a adhesive solution. concealed in wall / slab along with continuous fish wire to draw mains, laid in

approved manner. Zari for PVC Pipe & Boxes shall be plastering by cement mortar & finishing the

surface to match the wall / ceiling. For 20 mm dia.

For 25mm dia. 100.00 Mtr. 33.00 RS: Thirty Three

Supplying & erecting UPVC Mini trunking (PVC Casing-n-Capping) having double-locking arrangement 50.00 Mtr. 22.00 RS: Twenty Two

with grooves, trunking of size not below 12.5 mm in height as per IS with accessories of PVC/Resin only

45a polypropylene not below 1.8 mm thick duly sealed in joint & erected on wall / ceiling of following size .

For 25 mm dia. 50.00 Mtr. 31.00 RS: Thirty One

Supplying and laying UPVC cable trunking system comprising unplasticised polyvinyl, chloride rigid 20.00 Mtr. 424.00 RS: Four Hundred

material with ignition free & flame proof confirming BS .All necessary accessories and measuring of Twenty Four only

following sizes. For 100 mm x 50 mm trunking (MK, LEGRAND, OBBO make Only])

For 50 mm x 50 mm trunking (MK, LEGRAND, OBBO make Only]) 20.00 Mtr. 187.00 RS: One Hundred

46b Eighty Seven only

Providing & fixing 20 mm. dia. PVC insulated G.I. Corrugated Flexible pipe with necessary socket, 20.00 Mtr. 31.00 RS: Thirty One

47 PVC bushes saddle, Check-nuts etc. complete of following sizes. only

Providing & fixing 25 mm. dia. PVC insulated G.I. Corrugated Flexible pipe with necessary socket, 20.00 Mtr. 37.00 RS: Thirty Seven

48 PVC bushes saddle, Check-nuts etc. complete of following sizes. only

Providing & Erecting Mains with FRLSH PVC Insulated wire ISI marked 1.1 KV grade with FIA approved 100.00 Mtr. 60.00 RS: Sixty only

ISI mark medium class 20/25/32 mm dia. embossed rigid PVC casing capping with PVC fitting fixed

with adhesive solution to be erected on/in brick wall / slab along with continuous G. I. fish wire to draw

mains laid in approved manner with plastering by cement mortar & finishing the surface to match the

49a wall / ceiling complete with FRLSH PVC insulated wire for earth continuity. (Approved ISI make only)

For 2 x 1.5 sq.mm. FRLSH copper multi stranded conductor mains with 1.5 sq.mm. FRLSH copper

multi stranded conductor for earthing as per standard colour code. -In Existing Pipe [Wire must be

having box packing]

Description QUANTITY Unit RATE IN WORD Amount

For 2 x 2.5 sq.mm. FRLSH copper multi stranded conductor mains with 1.5 sq.mm. FRLSH copper 50.00 Mtr. 81.00 RS: Eighty One

multi stranded conductor for earthing as per standard colour code. -In Existing Pipe [Wire must be only

having box packing]

For 2 x 4.0 sq.mm. FRLSH copper multi stranded conductor mains with 2.5 sq.mm. FRLSH copper 50.00 Mtr. 113.00 RS: One Hundred

multi stranded conductor for earthing as per standard colour code.-In Existing Pipe [Wire must be Thirteen only

having box packing]

For 2 x 6.0 sq.mm. FRLSH copper multi stranded conductor mains with 2.5 sq.mm. FRLSH copper 50.00 Mtr. 157.00 RS: One Hundred

multi stranded conductor for earthing as per standard colour code.-In Existing Pipe [Wire must be Fifty Seven only

having box packing]

Providing following type of Modular Type Accessories mounted with 20 G company fabricated metalic 5.00 Each 150.00 RS: One Hundred

box, single mounting base frame covered with textured / metallic front plate, modules erected with Fifty only

necessary connection. As desired by Engineer in charge. For One No. SP 6 Amp Cat-III

For One No 5 pin plug Cat-III 5.00 Each 150.00 RS: One Hundred

For Blank Plate Single Cat-III 5.00 Each 25.00 RS: Twenty Five

For 16 Amp. SP one way switch Cat-III 5.00 Each 179.00 RS: One Hundred

50d Seventy Nine only

For 6/16Amp. Universal socket Cat-III 5.00 Each 198.00 RS: One Hundred

50e Ninty Eight only

Providing, erecting, fabricating the M.S. structure as per requirement of site as per structure design 50.00 kg 77.00 RS: Seventy Seven

Including proper size approved by EIC of M.S. angles, flats, bars, square pipe, channels, sections only

(Tata,Zindal,Asian,Jsi Make) complete with cutting, welding, grinding and finishing duly painted with

Asian/Nerolac make premium quality oil paint and true care red oxide metal primer,asian paint make

with erection on site as per direction of engineer in charge with necessary grouting cementing,

plastering and finishing complete. All hole opening of square pipe end must be closed with M.S plate

welding. Payment will be done on KG as per Actual weight.

Supplying & erecting 12 mm thick backelite sheet of approved make and grade on 25 x 25 x 3 mm red 1.00 Sq. Mtr. 2289.00 RS: Two Thousand

oxide painted angle iron frame suitable for fixing ICDP SWITCH and energy meter (contractor shall Two Hundred Eighty Nine

52 make approved drawing of Bakelite sheet To arrange required No. of Energy meter & ICDP switch - only

busbar etc. as per Actual space available in electrical room at site)

Supplying & erecting M.S./ G.I metal Box having 16 Gauge painted with red oxide be concealed in wall 100.00 Sq. Inch 5.94 RS: Five and Paise

with necessary plastering & finishing covered with 3mm thick Laminated sheet with grooving as Ninty Four only

53 directed of following depth. 3" Depth

Providing & Erecting 3mm thick Polycarbonate (PC) sheet with grooving as directed 100.00 Sq. Inch 3.00 RS: Three only

Description QUANTITY Unit RATE IN WORD Amount

Supplying and Erecting LED indoor fitting having 1100mm long with LED of wattage Mashroom shape 0.2W to 15.00 Each 370.00 RS: Three Hundred

0.5W assemble on single MCPCB with housing use as a heat sink shall be made from white powder coating Seventy only

Aluminum extrusion having enough strength (sample must be approved by EIC)with polycarbonate diffuser with

following specification:

(A) Company mark/name on the fitting.

(B) Rated input voltage and frequency: 220V to 240 VAC ; 50Hz.

(C) Rated input wattage: max. 24w

(D) Rated input current : 0.2 Amp

(E) Power Factor : Min.

(F) ATHD :Max. 15%

(G) Rated Luminous flux: Min. 2420 lm

(I) CRI: Min. 80Ra

(J) Driver Efficiency: Min. 80%

(K) LED life span: Min. 50000 Hrs @ L70 (Certificate shall be attached)

(L) Over Voltage protection: Withstand up to 440V/AC for 4 Hrs.

(M) Surge protection : Min. 2KV (N) IP rating: IP

(O) IK rating : IK

(P) Short circuit , Open circuit & Reverse Polarity Protection must be provided

(Q) Fixing Clamp min.12mm wide heavy duty design & strength should be sufficient to hold the fitting erected on

wall or ceiling

(R) 3 core x 1.0 Sqmm copper wire with min. 1ft (300mm) earthing connector.

(Note:-The manufacturer/ authorized Channel partner of the manufacturer has to submit 5 yrs free replacement

Guarantee for complete Fixture) [Approval will be given strictly subject to item specification]

Providing and erecting max. 10 watt LED battern having main housing having powder coated 12.00 Each 309.00 RS: Three Hundred

aluminium extruded & mashroom shape polycarbonate diffuser. Electrically & photomatry parameters Nine only

are as undr: 240 V, 50 Hz, System wattage 10 w ± 10 %, PF ≥ 0.95, system luments min. 1000, CCT-

3000K to 6500K, CRI ≥ 80, THD ≤ 15%, delivery efficiency ≥ 85%, L80 Certified LED, 30000 hrs. @ L70,

Electronic CC driver, 3 core insulated copper wire for internal wiring, IP20, operating voltage: 160 to

270 V, Surge - 2 KV, Fixing Clamp min.12mm wide heavy duty design & strength should be sufficient to

56 hold the fitting erected on wall or ceiling,Length of fitting should be min.600mm,3 core x 0.5 Sqmm

copper wire with min. 1ft (300mm) & earthing connector.

Supplying and erecting 8 W LED lamps with following wattage capacity of 220 to 240 voltage, minimum 12.00 Each 111.00 RS: One Hundred

15000 burning hours life, 500 V in built-surge protection,Polycarbonate diffuser, mounting suitable for Eleven only

E14 / E27 / B22 lamp holders, pf >= 0.5 (A) LED Lamps integral type, with PC diffuser suitable LAMP

Description QUANTITY Unit RATE IN WORD Amount

Supplying and erecting approved make 200mm sweep low noise decorative exhaust fan having 6.00 Each 1353.00 RS: One Thousand

Aerodynamically designed and Blanced Blade, Blade finish Opaque,body colour White , finish Glossy Three Hundred Fifty Three

, Rated Speed 1350 revolution per minute ,air delivery 500m³ / hr , noise level 50 dB , Power only

Consumption 35 W, ,Rated Voltage 230 V , no. of blades 7 , guard 18 Louvers , square frame ABS

58 body with inbuilt lowers and square frame.( Havells Make Ventilair LX or Bajaj, Usha, Crompton and

Equivalent Model Approved by EIC subject to Above Specification )

Providing & Erecting 2.0 mtr long Earthing system by making minimum bore of 225 mm dia in soft soil. Suitable for doing 2.00 Each 6000.00 RS: Six Thousand

pipe-in-pipe technology earthing.Earth electric rod must be made from Corrosion free Hot dip galvanizing pipes having only

following specification.

(A) Earthing Electrode: outerpipe:- 88 mm minimum O.D., ISI 'B ' Class ISI mark of Reputed Brand, Inner pipe:- 42 mm

minimum O.D., Pipe B Class ISI mark reputed Brand Terminal Size: 70mm X 100mm length, Terminal Should be made from

inner pipe for that pipe must be pressed and give rectangular shape so its work as a terminal.The hot deep galvanising must

be done after above process.Galvanised thickness must be minimum 75 micron any where. SS Nut bolt:- 2 no.with washer

suitable for 14mm dia. hole must be provided at terminal. total minimum Weight(approx.) of earth electrodewith inside

conductive material minimum should be 26 kg.

(B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm/meter testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no

load & dry form, Sulphar content:- <2%

(C) Back fill Compound:- Earthing compound should be capable to retain moisture for long time Back Filling Compound

weight is 25 Kg.

1. Short circuit test by ERDA/ CPRI for 25KA

59a 2. Resistivity test of conducting material from NABL accredited lab.

3. Hot dip galvanised / zinc coating micro test from reputed laboratory.

4. General test report from OEM regarding specification of earthing.

[Make and model approved by EIC Strictly subject to item specification only] [OEM has to submit all detail & sample for

approved before supplying]

[Water must be poured in bore before starting earthing. Earthing value must be measured with earth tester. Agency has to

bring the earth resistance to at least 02 ohms & voltage between neutral & Earthing upto 02 volt. Agency has to maintain

earthing & its value for one year. Earthing must be done in the presence of A.E. (GSPHCL)]

Providing & Erecting Earthing Chamber and cover:- Earthing chamber should heavy duty PVC/CC/brick 2.00 Each 1025.00 RS: One Thousand

masonary be size of 400 mm X 400 mm X 400 mm depth and Cover should be heavy duty cast iron with Twenty Five only

59b required size of 300 mm X 300 mm X 4 mm thick. Necessary test report must be submitted.

For above earthing additional charges for boring in hard rock soil/ semi hard rock soil (by breaker) & 2.00 Each 325.00 RS: Three Hundred

filling soft soil in earth pit (certificate for soil have to given by DEE / AE along with photographs) Twenty Five only

Description QUANTITY Unit RATE IN WORD Amount

Supplying and erecting Fabricating terminal box for street light pole made from 16 SWG M.S. sheet 4.00 Each 702.00 RS: Seven Hundred

having following size complete with fixing arrangement for terminal board, with necessary hole for Two only

wire entry and exit from the box. The box shall be provided with cover and hinges on one side and

bolting at other end The box shall be fixed by clamps fabricated from 25mm x 6mm flat.The box shall

be painted with one coat of red oxide and two coats of paint having following box size 330 mm x

mm x 140 mm (depth). Providing and fixing Terminal board of size 5.0 x 127 x 152.4 mm.bakelite sheet

with 15 Amp. kitkat pattern porcelain fuse unit with suitable brass studs with nuts, washers and

clamps of size 25 mm x 3 mm suitable for pole painted with one coat of red lead paint.

Providing & Erecting Flexible PVC insulated multistrand multicore 1.1 kv grade ISI marked copper 20.00 Mtr. 58.00 RS: Fifty Eight

61 wires of following size to be erected as directed. 3 core 1.5 sq.mm. PVC insulated round copper wire only

ISI mark. (streetlight)

Providing & erecting bracket consisting of ISI mark "B" class G.I. Pipe 4.2 cm outside diameter 4.00 Each 487.00 RS: Four Hundred

complete with suitable G.I. Sleeve tubing of 2 mm. thick and required size and length suitable for 76.5 / Eighty Seven only

80 mm. required size of pole top or pipe in pipe surface for terrace as per instruction of EIC or wall

bracket as per instruction of EIC having nuts and bolts for fixing the brackets and having spread of

62 Upto 0.50 mtr. length with suitable rise as per site condition and suitable welded stiffner reducer and

nipple with check nut complete painted with one coat of yellow zinc and two coats of alluminium paint

for Single arm bracket suitable for pole or terrace as per design given by EIC. For single arm bracket.

(Jindal / Asian / Tata / Surya Prakash make Only) (Fabricators:- Bajaj, Valmont, Transrail, Ambica, RR

Ispat Only) (Test certificate to be submitted)

SITC of Outdoor aesthetically designed LED Street Light Luminaire with total consumption of max. 55 Watts 4.00 Each 4406.00 RS: Four Thousand

with single piece heavy duty & sufficient size of die cast aluminium housing to accommodate driver, both SPD Four Hundred Six only

and necessary wiring and terminal easily inside the housing. High power LEDs wattage of 5 Watt (Driving

current of LED should be max. 80% of Rated current) shall be mounted on high quality metal core PCB with

extremely precison designed heat sink complete with IP66 protection. LED lense are covered with thoughened

glass / premium cluster Lens for better light distribution. The fixture should be suitable for pole/bracket

mounting. The fixture should be complied with both LM79 and LM 80 certified. LED module should be tested L70

at 50,000 hrs ( All Test Certificate must be submitted with RA bill). LED fitting provided with high quality potted

driver with Metal housing and protection against high and low Voltage cut Off, Protection against 440V. Driver

63 should have protection like over current, over voltage, short circuit and operational in the temperature range of

0 deg to 50 deg and humidity range of 10% to 90% RH. THD of driver should be less than 10% and P.F > 0.95.

The Fixture should meet the technical criterias like Operating Voltage range 180 to 270 V, total lumens of fitting

not less than 7500, CCT> 4K/6K as per site requirement & decided by EIC, CRI > 65, beam angle 120 deg, surge

immunity level at least 4 KV integral and 10 KV non integral. (Note:- The manufacturer / authorized Channel

partner of the manufacturer has to submit 5 yrs free replacement Guarantee for complete Fixture)

Providing and erecting FRLS XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for 80.00 Mtr. 451.00 RS: Four Hundred

1.1 KV. to be laid on wall with necessary clamps 1.00 mm thick to be laid 90 cms underground with Fifty One only

64 1.00 mm thick G.I heavy duty grade or in existing trench / pipe at road crossing or floor of following

size of cables. for 4 core 4 Sq. mm

Description QUANTITY Unit RATE IN WORD Amount

Providing & fixing Double compressed heavy duty flange type brass cable gland with rubber ring for P 8.00 Each 43.00 RS: Forty Three

V C insulated armoured cable complete with outgoing tails, insulating tape etc. For following size only

65 cables. For 2 to 4 core x 4.0 Sq. mm (Sigma, MCI, Comet, HMI Make Only)

Solderless crimping type Copper lugs conforming to IS suitable for cable of following size evenly 51.00 Each 8.00 RS: Eight only

crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut

bolts in an approved manner.For 1.5/2.5 to 6 Sq.mm Cable

Providing & laying HDPE Double walled corrugated pipes (DWC) (conforming to IS: 16205 (part 24) 20.00 Mtr. 117.00 RS: One Hundred

2018)) with minimum load required of 450N capacity with anti rodent and ultra violet material properties Seventeen only

with necessary connecting accessories of same material at required depth to be laid 90 cms. under

67 ground for laying of cable below ground / road surface for enclosing cable and back filling the same to

make ground as per original. For Outer dia. 50 mm and Inner dia. 38 mm. ) (Test Certificate to be

Providing & Erecting Mains with ISI marked, 1.1 KV grade electrolyte multi stranded, annealed copper 50.00 Mtr. 70.00 RS: Seventy only

conductor with heat resistant PVC insulated conforms to IS:694, IEC - 227 erected in existing pipe of

68a following size (Specifically for control panel, relays, power switchgears, motor starters & control

wiring) with required size of copper lugs, nuts and bolts if required. for One wire 6.00 sq. mm

For One wire 10.00 sq. mm 50.00 Mtr. 114.00 RS: One Hundred

Providing & erecting 240 V MCB double pole switch for motor & inductive load (C Curve) having 10 2.00 Each 360.00 RS: Three Hundred

69 KA breaking capacity & confirms to IS : 8828 in existing metal box having following capacity for Sixty only

Providing & erecting 240 V MCB double pole switch for motor & inductive load (C Curve) having 10 2.00 Each 327.00 RS: Three Hundred

70 KA breaking capacity & confirms to IS : 8828 in existing box having following capacity for 6-32Amp Twenty Seven only

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA 2.00 Each 728.00 RS: Seven Hundred

71 breaking capacity & confirms to IS :8828 in existing box having following capacity For 40 Amp. Twenty Eight only

Supplying & fixing box for housing RCCB + MCB combination made of 18 SWG sheet steel duly 2.00 Each 299.00 RS: Two Hundred

powder coated with gasket, dust & vermin proof bakelite shield two earthing terminals for following Ninty Nine only

type of RCCB, RCCB + MCB for 2 Pole

Description QUANTITY Unit RATE IN WORD Amount

Supplying & fixing box for housing RCCB + MCB combination made of 18 SWG sheet steel duly 2.00 Each 486.00 RS: Four Hundred

powder coated with gasket, dust & vermin proof bakelite shield two earthing terminals for following Eighty Six only

type of RCCB, RCCB + MCB for 4 Pole

Dismantling the existing light, fan, bell, , independent plug point, wiring with mains of all types along 50.00 point 1.00 RS: One only

74 with accessories etc. complete and handed over to dept.

Dismantling the existing ceiling fan / exhaust fan / cabin fan / bracket fan complete with accessories, 60.00 point 9.00 RS: Nine only

75 G.I. down rod, frame etc. and making the site clear.

TOTAL CIVIL COST

TOTAL ELECTRICAL COST

TOTAL CIVIL+ELECTRICAL COST

Signature of Contractor DY.Executive Engineer Executive Engineer

Ahmedabad. Ahmedabad.