Loading
Loading…
Loading…
Tender Value
₹43.4 L
EMD Value
₹86,834
Closing Date
8 Oct 2026, 6:00 pm
GE (AFA) Hyderabad
GE (AFA) Hyderabad, Dundigal, Hyderabad
PROVISION OF CERTAIN WORKS AT CAMP PRAHAR SITE AT AFA HYDERABAD.
2026_MES_789944_1
8743/E8
Open Tender
Civil Works
Item Rate
HYDERABAD
As per NIT
5 documents required · 5 mandatory
₹500
GE (AFA) HYDERABAD
₹86,834
Yes
18 Sept 2026
18 Sept 2026
10 Oct 2026
18 Sept 2026
8 Oct 2026
2 Oct 2026
18 Sept 2026 - 2 Oct 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Excavating in trenches n. exc 1.5 m width and n. exc 1.5 m in depth for foundation or etc or for shafts , wells , cesspits , manholes , pier holes etc n exc 10 sqm on plan and n exc 1.5 m in depth orgetting out in any type of soil, complete all as specified and as directed. | 40 | Cum | 100 | ₹4,000 |
| 2 | M & L cement concrete in foundation, filling and mass concrete type D-2, 1:4:8 mix using 40 mm graded stone aggregate, completed all as specified and directed. | 4 | Cum | 100 | ₹400 |
| 3 | M&L RCC 1:1/2:3 type B1 (20mm graded aggregate) for foundation including rafts footing ,foundation beams plinth beams bases for columns etc basement slab,under reamed piles and mass concrete | 10 | Cum | 100 | ₹1,000 |
| 4 | M&L RCC1:1/2:3 type B1 (20mm graded aggregate) for Columns, pillars, piers, posts and struts | 1.9 | Cum | 100 | ₹190 |
| 5 | M&L for pre-cast reinforced cement concrete 1:2:4, type B1 (using 20 mm graded stone aggregate), as in kitchen flatform and selfs in kitchen slabs, etc including necessary form work , complete all as specified and as directed. Set in CM 1:4 | 1.8 | Cum | 100 | ₹180 |
| 6 | M&L for RCC TypeB1 1:2:4 (using 20 mm graded aggregate) as in Beams/bands cantilevers, bressummers, chajjas , lintels over 1.5m span | 0.8 | Cum | 100 | ₹80 |
| 7 | Returning,filling in including spreading , levelling,watering and well ramming in layers not exc 25 cm | 299 | Cum | 100 | ₹29,900 |
| 8 | Removing excavated material exc. 1.50 km but n exc. 5 km and depositing where directed | 17 | Cum | 100 | ₹1,700 |
| 9 | M&L for mild steel TMT bars 10mm dia and over, cut to length bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.90 mm dia complete all as specified and as directed. | 670 | Kg | 100 | ₹67,000 |
| 10 | S&F mild steel TMT bar 6 mm to 8 mm dia. and over, cut to length , bent to shape as required, hooking ends and bining with and including mild steel wire (annealed) not less than 0.9 mm dia. Used in stirrups, spacers and binders, complete all as specified and directed. | 275 | Kg | 100 | ₹27,500 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.12 MB
BOQ_885532.xls
BOQ • 0.63 MB
TENDERPAGES8743.pdf
Tender Documents • 0.58 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .