Major Repair of Divisional Forest Office at Joginder Nagar Distt. Mandi (H.P.)

Amount

Excavation in foundation trenches etcetera in earth work lift upto 1.50 mtr. Stacking the excavated soil not more than 3 mtr. Clear form the edge of the excavation and then returning the stacked soil in 15 cm layers, when required into plinths sides of foundations etcetera, consolidating each deposited layer by ramming and wareing and ten disposing of all surplus excavated earth as directed with in a lead of 20 mtrs. pick jumper work complete within all leads, lifts, carriage and other incidentials.

Providing and laying cement concrete 1:6:12 (1cement:6sand :12 graded stone aggregate 40 mm nominal size) and curing completye excluding cost of centring and shuttering in fondation and plinthcomplete within all leads, lifts, carriage and other incidentials.

Providing and laying cement concrete 1:2:4 (1 cement:2 sand : 4 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in suspended floor roof landing and selfs and their supprt complete within all leads, lifts, carriage and other incidentials.

Providing Tor steel reinforcement for RCC work including bending, binding & placing in position complete upto floor two level in all leads and lifts.

Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm, so as to give a fair finish including centring, shuttering , strutting and propping etc. with wooden battens and ballies height of propping and centering below supporting floor to ceiling not exceeding 4 mtr and removal of the same for insitu-reinforced concrete and plain concrete work in:-

Flat surface such as soffits of suspnded floors, roofs, landing and the like floor etc. upto 200 mm in thickness complete within all leads, lifts, carriage and other incidentials.

Boulder filling dry hand packed tightly under floor complete within all leads, lifts, carriage and other incidentials.

Random rubble masonry/polygonal rubble masonry (uncoursed/brought to courses) with hard stones of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (1 cement: 6 sand :12 graded stone aggregate 20 mm nominal size) at plinth level in cement mortar 1:6 (one cement:six sand) complete within all leads, lifts, carriage and other incidentials.

Brick work using comon burnt clay building bricks in foundation and plinth in cement mortar 1:6 (1cement :6 sand) second class bricks. Extra for brick work in super-structure above plinth level upto floor two level (second class bricks) complete within all leads, lifts, carriage and other incidentials.

Half brick masonry in common burnt clay in CM 1:4 super structurecomplete within all leads, lifts, carriage and other incidentials.

Providing and fixing 12 mm thick prelaminated board both side bwp phenol bonded exterior/interior grade panelled shutters with frames of 1st class deodar wood for doors including bright finished/back enamelled iron butt hinges with necessary screws 40 mm thick frame complete within all leads, lifts, carriage and other incidentials.

Providing and fixing anodized aluminium sliding door bolts anodized colour and shade with bolts and nuts screws etc. (250X16 mm) complete within all leads, lifts, carriage and other incidentials.

Providing and fixing aluminium handles anodized transparent or dyed to required colour of shade with necessary screws (125mm) etcetera complete within all leads, lifts, carriage and other incidentials.

Providing and fixing aluminium tower bolts (Berrel type) anodized transparent or dyed to required shade and colour with screws (250 X 10 mm) etc complete within all leads, lifts, carriage and other incidentials.

Providing and fixing angle iron door, window, clerestory windows frames manufactured from steel iron section of 40X40X6mm thicknes including hinges jamb, lock jamb, beed and if required angle thrashold of mild steel angle 50X25 mm welded or rigidly fixed by mechanical means, lugs, with splits end tails to each jamb including steel butt hinges 2.5 mm thick with provision of locking arrangement and shock observer as specified and applying a coat of approved steel primer after preteatment of the surface as per direction fo Engineer- In-Charge complete within all leads, lifts, carriage and other incidentials.

Providing and fixing M.S. grills of required pattern in woden frames of windows etc with M.S. flats, square or round bars with round headed bolts and nuts or by screws plain grill complete within all leads, lifts, carriage and other incidentials.

15 mm cement planster in single coat on the rough side of brick/concrete/stone wals for interior planstering above floor two level to floor three level including arries, internal rounded angle, chamfers and /or rounded angles not exceeding 80 mm in girth and finished even and smooth in cement mortar 1:6 (1 cement :6 sand) complete within all leads, lifts, carriage and other incidentials.

White glazed tiles 6 mm thick in flooring, treads, of steps and landing laid on a bed of 12 mm thick cement mortar 1:3 (1cement: 3 sand) finished with flush pointing in white cement complete within all leads, lifts, carriage and other incidentials.

White glazed tiles 6mm thick in skirting risers of steps and dado 12 mm thick cement mortar 1:3 (1 cement:3 sand) and jointed with cement slurry complete within all leads, lifts, carriage and other incidentials.

Providing and fixing 15 mm nominal bore to wall ceiling and floor galavanized mild steel tubes (Medium grade) tube fitting and clamps including making good the wal, ceiling and floor complete within all leads, lifts, carriage and other incidentials.

Excavation in drain channles etc in earth work including dressing the sides and bed and disposing of excavated earth upto 20 mtr. And lift upto 1.50 mtr. Disposed earth to be leveled and neatly dressed in pick and jumper work complete within all leads, lifts, carriage and other incidentials.

Providing and fixing water tank of ISI: 12701 marked, G.I. inlet and outlet connection, 15 mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting upto all heights above ground level. 1000 ltr. Net capacity tank complete within all leads, lifts, carriage and other incidentials.

Providing and fixing 100 mm dia sand cast/cast iron spigot and socket soil, wate and ventilating pipe (lead coulked) joints complete within all leads, lifts, carriage and other incidentials.

Providing and fixing MS holder bat clamps of approved design to CI on SCI pipes embeded in and including cement concrete blocks 10X10X10cm of 1:2:4 (1cement:2 dsmf :4 stone aggregate 20 mm nominal size) and cost of cutting holes and making good the wall etc 100 mm diametre for CI pipe complete within all leads, lifts, carriage and other incidentials.

Providing and fixing sand cast iron/cast iron spun fittings and accessaries-Bends of required degree ( any rqadious) complete within all leads, lifts, carriage and other incidentials.

With oval acess door insertion rubber washer 2mm thick, bolts and nuts complete 100 mm nominal size

Plain bends 100 mm nominal size

Double equal branch of required degree 100 mm nominal size

Providing and fixing vitreous china wash down water closet (European Type WC Pan) with internal "P" or "S" trap including jointily the trap with soil pipe in cement mortar 1:1 (1 cement :1 sand) seat and cover complete within all leads, lifts, carriage and other incidentials.

Providing and fixing vitreous china bowl pattern urinal including connection the urinal with waste pipe by means of white lead mixed with chupped hemp flat back type of size 430X260X350mm complete within all leads, lifts, carriage and other incidentials.

Providing and fixing 10 to 12.50/15.00 ltr. PVC low level flushing cistern with a pair of CI or mild steel brackets complete with fitting such as lead value less syphon 15mm nominal size brass ball valve with polythene float CP brass handle unions and couplings for connection with inlet outlet and over flow pipes 40 mm dia CP flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet complete within all leads, lifts, carriage and other incidentials.

Providing and fixing CP brass flush pipe/spreaders for urinal with fitting such as unions clamps etc. (all in CP brass) including cutting holes and making good the same 32 mm nominal bore complete within all leads, lifts, carriage and other incidentials.

Providing and fixing CP Brass bib tap with capstan head 15 mm dia complete within all leads, lifts, carriage and other incidentials.

Providing and fixing CP Stop Coaks 15 mm dia complete within all leads, lifts, carriage and other incidentials.

Providing and fixing vitreous china wash basin with single hole for piller trap with CP or MS brackets painted white including cutting holes and making good the same but excluding fitting. Flat Black 550X400mm complete within all leads, lifts, carriage and other incidentials.

Providing and fixing 15mm diametre brass angle valve complete within all leads, lifts, carriage and other incidentials.

Providing and fixing PVC connection pipe with brass union 300 mm length 15mm nominal bore complete within all leads, lifts, carriage and other incidentials.

Providing and fixing 15mm nominal bore brass full way valve with whell complete within all leads, lifts, carriage and other incidentials.

Providing and fixing MI union for wash basin or sink 32mm dia complete within all leads, lifts, carriage and other incidentials.

Providing and fixing in position brass mosquito proof coupling for overflow pipe of 25mm dia complete within all leads, lifts, carriage and other incidentials.

Providing and fixing 0.45 mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 mocrons primer coating to back coat of pllyster 5 microns primer coating including fixing with prepainted iron Jor L hooks, bolts and nuts 6mm diametre with prepainted limpet and rubber washers complete with all accesories as required as per the direction of Engineer-In-Charge complete within all leads, lifts, carriage and other incidentials.

Providing and fixing ridges or hips 60 cm over all with 0.60 mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated wheet with top coat of regular modified polyster (RNP) organic coating of 20 mocrons over 5 microns primer coating +back coat of polyster of 5 microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia and prepainted g.I. limpet and bitumen washers complete with all accesoriees as required as per the direction of Engineer-In-Charge complete within all leads, lifts, carriage and other incidentials.

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additive of required shade Old work (Two or morre coats applied @ 1.43 ltr/10 sqm) over existing cement paint surface complete within all leads, lifts, carriage and other incidentials.

Providing and laying Full Body Vitrified tiles in different sizes (thickness to be specified by manufacturer), with saterabsorption less than 0.08% and conformming to I.S. 15622 of approved make in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joint with white cement & matching pigments etc complete :10 mm thick full body vitrifed tiled of size of 60X60 cm of Desert series in approved shade of Simplo Ceramics/ AGL tiles/Kajaria/Orient Bell complete within all leads, lifts, carriage and other incidentials.

Providing and fixing 40 mm thick plain framed naneling with necessary screws priming coat on unexposed surface etc. complete with 1st class deodar wood complete within all leads, lifts, carriage and other incidentials.

Providing and fixing 15 mm thick densified tegular edged eco frinely light weight calcium silicate false ceiling tiles of approved texture of size 595X595 mm in tru horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @120 grams per sqm including both side) consisting of main T' runner suitably spaced at joints to get required length and size 24X38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross "T" of size 24X28 mm made out of 0.33 mm thick Minimum) shee, 1200 mm long spaced between man 'T' at 600 mm centre to centre to form a grid of 1200X600 mm and secondary cross 'T' of length 600 mm and size 24X28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200X600 mm panel to from grid of size 600X600 mm, resting on periphery walls/ partitions on a Perimeter wall angle precoated steel of size (24X24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @230 mm interval and laying 15 mm thick densified edges calcium silicate ceiling tiles of approved textures, smoke detectors etc, wherever required. Main 'T' runners to be suspended from ceiling using G.I. slotted cleats of size 25X35X1.6 mm fixed to ceiling with 1.5mm dia and 50 mm long dash fasteners, 4mm G.I. adjustable rods with galvanised steel level clips of size 85X30X0.8mm, spaced at 1200 mm centre to centre along main 'T', bottom exposed with 24 mm of all T sections shall be prepainted with polyster baked paing, for all heights, as per specifications, drawings and as directed by Engineer-In-Charge complete within all leads, lifts, carriage and other incidentials.

Providing and fixing wire gauge shutters using galvanized MS wire gauge of IS gauge designation 85g with wire of dia 0.56 mm for doors windows and clear story windows including bright finished black enamelled iron higes with necessary screws complete within all leads, lifts, carriage and other incidentials.

Providing and fixing 20 mm thick one side Prelaminated board bwp phenol bonded exterior grade complete within all leads, lifts, carriage and other incidentials.

ABHISHEK

Om Prakash