CNT/WSS/MWB/3572/2023-24

Amount

Hiring and runing charges for JCB(per day = 8 hrs)

Dismantling the Asphaltic road surface by using Air compressor /JCB.

Day Work

Night Work

Earth work excavation and depositing on bank with initial lead of 10 meters and lift 2.00m in hard stiff clay stiff black cotton, hard red earth, shales, Muram,gravel, stoney earth and earth mixed with small size boulders S.S.20-B. Making Trial pit.

Laying D.I. pipes including earthwork excavation for trenches in hard stiff clay, stiff black cotton, hard red earth, shales, murams, gravel, stoney earth and earth mixed with small size boulders and hard gravelly soil, depositing the earth on banks with initial lead of 10m and lift 2.00m carting of pipes from any of the Board’s stores to the site of work, lowering into trenches and aligning, etc., complete(excluding back filling )

Day Work

200mm dia 1.5m depth

150mm dia 1.5m depth

100mm dia 1.5m depth

Night Work

200mm dia 1.5m depth

150mm dia 1.5m depth

100mm dia 1.5m depth

Providing Iron Barricading of size 2.50 m width and 1.75 m height using 40x40x4 mm angle for outer frame supports, 25 x 25 x 3 mm angle for inner frame supports and 20 gauge thickness MS sheet for name board (as per drawing) including cutting, welding, fabrication charges and one coat of primer and 2 coats of enamel paint of approved quality, writing "METRO WATER" & work detail/ caution sign, providing necessary interlocking arrangements with adjoining units, fixing danger flags, danger lights, reflectors, fixing stickers etc, including watching during night and placing the barricading units as directed at the sites

Day Work

Night Work

Supplying of the following Pipes and Specials

200mm dia D.I.pipe - K7 Class

150mm dia D.I.pipe- K7 Class

100mm dia D.I.pipe- K7 Class

200mm dia Rubber gasket

150mm dia Rubber gasket

100mm dia Rubber gasket

200mm dia M.J.Collar

150mm dia M.J.Collar

100mm dia M.J.Collar

200mm dia 90 deg bend

200mmx100mm dia All socket Tee

200mmx150mm dia All socket Tee

200mmx200mm dia All socket Tee

200mm dia D.I. end cap

100mm dia Sluice valve with tail piece

150mm dia Sluice valve with tail piece

200mm dia Sluice valve with tail piece

Supplying and fixing specials like “C.I.Tee” Branches, Bends and tapers including earthwork excavation any depth of

200mmx150mm dia Taper (day work)

200mmx150mm dia Taper (Night work)

200mmx100mm dia Taper (day work)

200mmx100mm dia Taper (Night work)

Making Rubber joint

200mm dia

150mm dia

100mm dia

Conveying and fixing of the following Specials

200mm dia M.J.Collar

150mm dia M.J.Collar

100mm dia M.J.Collar

200mm dia 90 deg bend

200mmx100mm dia All socket Tee ( day work)

200mmx100mm dia All socket Tee ( Night work)

200mmx150mm dia All socket Tee ( day work)

200mmx150mm dia All socket Tee ( Night work)

200mmx200mm dia All socket Tee ( day work)

200mmx200mm dia All socket Tee ( Night work)

200mm dia D.I. end cap

200mm dia Sluice valve with tail piece

150mm dia Sluice valve with tail piece

100mm dia Sluice valve with tail piece

Supply and Delivery of Tamper proof DI single chamber air release valves with pressure range from PN 1.0 to 2.5 with body and cover made of Ductile Iron of Grade GGG 40 conforming to IS 1865 with Food Grade Epoxy Powder coating(EP-P) inside and for outside of colour blue RAL 5005. All internal parts such as float, shell etc., cover bolts, made of Austenitic alloy steel of SS AISI 304/316. The float for DN 50 made of Polytetrafluroethylene/ Austenitic alloy steel of AISI 304/316. Gaskets and seals of EPDM / Neoprene rubber

200 mm dia

Cutting D.I. mains

200mm dia ( day work)

200mm dia ( Night work)

150mm dia ( day work)

150mm dia ( Night work)

100mm dia ( day work)

100mm dia ( Night work)

Connection work to existing main including cuting existing pipe, fixing branches, collars, lead jointing and bailing out water, etc., excluding excavation. Cutting 250mm to 175mm (10’’ to 7”) C.I. pipe and fixing 250mm to 50mm (10” to 2”) branch

Hire charges for diesel pumpset above 3HP to 7.5HP with fuel and operator charges including transportation

Testing of D.I.pipes with hydrulic testing equipment by fillling with water and testing to recommended pressure in convenient sretches and attending the bursts if any occurred during the test, excluding the cost of pipes, including other incidental and operational charges,etc., complete

200mm dia

150mm dia

100mm dia

Providing and laying, spreading and compacting graded stone aggregrats to Wet mix macadam 250mm thick specification including pre mixing the materials with water at OMC in mechanical mix plant carriage of mixed material by tipper to site laying in uniform layers with pavers in Sub Base/Base corse on well prepared and compacting with vibratory roller to achive the desired density including cost of material, labour charges, rentals for machineary fuel and other incidential charges etc., complete as per clause of 406 of MORTH Rev 5

Day Work

Night Work

Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of M20 grade for reinforced cement concrete structural elements under controlled water cement ratio with plasticiser using 20mm and down graded machine broken granite stone jelly excluding the cost of centering and shuttering and reinforcement but including curing, fixing, fan clamps etc., as per standard specification and as directed by the Board officers complete.

Disposal of surplus excavated earth

Day Work

Night Work

Supply of un plasticized PVC pipes of size 110mm dia (6 KSC) and Laying P.V.C straight pipes and specials including carting, jointing, excavation

House service connections(Day work)

House service connections(Night work)

Supplying and laying of MDPE (PE80) Blue pipe (IS:4427) with necessary specials including earth work excavation laying jointing testing, refilling the trenches and disposal of surplus earth etc.complete.( House service connections water )

20 mm O.D ( Day work)

20 mm O.D ( Night work)

Making bore and tapping in the CI pipeline,supplying and fixing of specials consisting of plastic moulded clamp saddle with (SS304) female threaded metal insert, sealing rubber and plastic wide strap including suitable bolts and nuts, Poly propylene compression fitting adopter with metal insert (SS304-male threaded), Poly proplene compression fitting 90 deg elbow, UPVC Ball Valve (stop cock) with compression joint at one end and female threaded at other end and suitable enclosure (HDPE) with top side openable for housing UPVC Ball Valve (stopcock) and testing house service connections including cost of water etc complete for following sizes.

20 mm O.D ( Day work)

20 mm O.D ( Night work)

SWD Crossing

Sub Total (excluding GST)

Manikanta Construction Company

Aero Construction Equipments