Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.6 LAccepted-AOC 195 MAHESH NAGAR AMBALA CANTT 133001 | AMBALA | HARYANA | 133001 | L1 | Accepted-AOC Being lowest bidder | |
| 2 | L2₹33.7 L+₹3.8 L (12.6%)Rejected-Finance 186 GANDHI MARKET AMBALA CANTT 133001 | AMBALA CANTT | AMBALA | HARYANA | 133001 | L2 | Rejected-Finance Other than lowest bidder | |
| 3 | L3₹34.6 L+₹4.7 L (15.8%)Rejected-Finance 1170 BENGALI MOHALLA NEAR PRABHAKAR HOSPITAL AMBALA CANTT 133001 | AMBALA | HARYANA | 133001 | L3 | Rejected-Finance Other than lowest bidder | |
| 4 | L4₹34.8 L+₹4.9 L (16.5%)Rejected-Finance | L4 | Rejected-Finance Other than lowest bidder | |
| 5 | L5₹35.7 L+₹5.8 L (19.3%)Rejected-Finance 27 19 F F D BLOCK CHATTARPUR EXTN SOUTH WEST DELHI DELHI 110075 | SOUTH WEST DELHI | DELHI | 110075 | L5 | Rejected-Finance Other than lowest bidder |
Tender Value
₹46 L
EMD Value
₹92,000
Closing Date
15 Apr 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE UTILITY AMBALA
GE UTILITY AMBALA CANTT 133001
REPAIR MAINT REPLACEMENT OF LT ELECTRIC OVERHEAD UNDERGROUND NETWORK SYSTEM INCLUDING ALLIED WORKS UNDER BRAVO AND RACE COURSE POWER HOUSE UNDER GE UTILITY AMBALA CANTT
2024_MES_646674_1
CA NO GE U AMB T 12 OF 2024-25
Open Tender
Civil Works
Item Rate
240 days
GE UTILITY AMBALA CANTT
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE UTILITY AMBALA CANTT
₹92,000
10 May 2024
16 Mar 2024
17 Apr 2024
16 Mar 2024
15 Apr 2024
1 Apr 2024
16 Mar 2024 - 23 Mar 2024
Amount
Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth for foundation, shafts, man holes,for under ground cable / erection of poles, stays, locating fault of LT cable and stay assembly etc not exceeding 10 square metre on plan and getting out in any type of soil including dressing/trimming of sides and leveling, grading and ramming of bottom of excavation complete all as specified and directed.
Earth work in excavation by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, complete all as specified and directed.
All as per item No 2.00 here in before but depth exceeding 1.5 metre and not exceeding 3.0 metre complete all as specified and directed.
Returning, filling in soil, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick each layer complete all as specified and directed.
Removing excavated material/soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.
Material and labour for sand cushioning to cable with a layer of sand 8 cm deep before laying the cable and 15 cms deep after laying the cable (punned down to 18 cms depth after laying and stretching of cable) complete all as specified and directed.
Supply and lay bricks, common burnt clay, sub class "B', old size, laid in vertical direction to cable as cable protection complete all as specified and directed.
All as per Item Ser No 7.00 here in before but except bricks, complete all as specified and directed. Note:- Old bricks retrieved from Item Ser No 11.00 here in after shall be re- used.
PCC 1:4:8 type D-2 using 40mm graded aggregate, mechanically crushed stone for mass filling in pole pit and foundation etc. complete all as specified and directed.
Material and labour for cement concrete (1:3:6) type C-1 using 20mm graded crushed stone aggregate as in coping of pole and strut, stay around the pole etc complete all as specified and directed.
Material and labour for PCC 1:2:4 Type B-1 using 20 mm graded stone aggregate for coping of poles including necessary form work and finishing the exposed surface even and smooth without using extra cement complete all as specified and directed.
Disconnecting & taking out defective underground cable from trenches, pole, pipe, floor, wall etc and locate the fault, rectify the defect and relaying the XLPE cable underground PVC insulated and overall sheathed aluminum conductor heavy duty 1100 volts including connecting and testing for any size complete all as specified and directed. (Excavation/earth work & sand cushioning, bricks and joint shall be measured & paid for separately).
Supply & Fixing of MS clamp suitable for holding street light bracket on steel/PCC pole made out of 40 mm x6 mm thick flat iron with M.S nuts bolts 50 mm long 10 mm dia -3 Nos with flat washer 3mm thick -02 No for each including painting with aluminium paint over one coat of red oxide primer to the M.S clamps including taking down existing complete all as specified and directed.
Supply, laying, connecting and testing of XLPE underground cable insulated, and overall sheathed with aluminium conductor heavy duty 1100 volts grade 16 sqmm 4.0 core laid in trenches/ on pole/road crossing or passing through existing/new pipe under road crossing clamping on wall incl aluminium thimbles/lugs etc including taking out defective cable complate all as specified and directed . Note: (i) Earth work, sand , bricks removing , returning filling will be paid seperately. (ii) Cost of laying electrical cable through new/existing pipe under road, buildings, railway tracks, highways are incl in the quoted rates (iii) All equiments, machinery or tool if required for laying electrical cable through new/existing pipes are provided by the contractor without any extra cost.
All as per item ser No 14 here in before but for 3.5 core 25 Sqmm complete all as specified and directed.
All as per item ser No 14 here in before but for 3.5 core 35 Sqmm complete all as specified and directed.
All as per item ser No 14 here in before but for 3.5 core 50 Sqmm complete all as specified and directed.
All as per item ser No 14 here in before but for 3.5 core 70 Sqmm complete all as specified and directed.
All as per item ser No 14 here in before but for 3.5 core 95 Sqmm complete all as specified and directed.
All as per item ser No 14 here in before but for 3.5 core 150 Sqmm complete all as specified and directed.
All as per item ser No 14 here in before but for 3.5 core 185 Sqmm complete all as specified and directed.
All as per item ser No 14 here in before but for 3.5 core 240 Sqmm complete all as specified and directed.
All as per item ser No 14 here in before but for 3.5 core 300 Sqmm complete all as specified and directed.
Supply, Laying, connecting and testing of underground XLPE cable underground PVC insulated and over all sheathed with aluminium conductor heavy duty 1100 volts cross sectional area 400 Sqmm single core grade, laid in trenches, floors, ducts passing through pipe for road crossing or in any other situation including taking out defective cable complete all as specified and directed. (Note : Excavation, earth work, brick protection, sand cushioning and GI pipe etc shall be measured & paid for separately).
Supplying and fixing of 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections one twin core cable flat or circular of size 10 sqmm 2 core including taking out defective cable complete all as specified and directed.
Supplying and fixing in replacement of light grade galvanised mild steel pipe 80mm bore with all fittings, laid under roads, drain, paths, fixed to poles/walls with suitable mild steel clamps , bolts , nuts and washers complete all as specified and directed. Note:- Excavation & earth work shall be measured and paid for separately under appropriate item of this schedule
All as per Item No 26 here-in-before but of size 50 mm bore complete all as specified and directed.
Boring of horizontal holes under road, pavement, hard standing by trenchless technology using ultra sounding technique or manual boring and necessary machine including HDPE pipe of 50mm to 150 mm dia suitable for 0.4 mpa working pressure complete all as specified and directed.
Supply and erection of Prestressed concrete pole 9.0 mtr long in true vertical position 102x172 mmm at top 102x279 mm at bottom class-10 incl providing black and white strips with synthetic enamel paint 30 cm each alternate upto 1.5 mtr above the coping of pole starting with black strip including dismantling and taking down old unsv pole complete all as specified and directed. Note:- (i) Earth work and PCC shall be measured and paid seperately. (ii) Description as per direction of Engineer-in-Charge will be printed on each pole without any extra cost.
Supply and erection of steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts,nuts and screws as specified type 410 SP-31 , 09 meter long, providing synthetic enamel aluminium paint over one coat of red oxide and black and white strips with synthetic enamel paint 30 cm each alternatively upto 1.5 mtr above the coping of pole starting with black strip including dismantling and taking down old unsv Steel tublar LT pole omplete all as specified and directed. Note:- (i) Earth work and PCC shall be measured and paid seperately. (ii) Description as per direction of Engineer-in-Charge will be printed on each pole without any extra cost.
Supply and fixing of stay assembly complete with all accessories, such as stay plate 230x230x6 mm, stay rod 215 cm long and 16 mm dia with nuts incl GI bow turn buckle, GI stay wire, Loop type insulator etc all as per electrical plate No 1 or SSR part 1 incl taking down old unsv stay assy complete all as specified and directed. Note- The quoted rate shall include the cost of loop type insulator, stay clamps, excavation, PCC, stay wire, stay bow, turn buckle, nuts etc complete.
Material and labour of Loop insulator Porcelain, vitreous white/brown/green insulator including one galvanized mild steel spindle, two galvanized iron washers and one galvanized iron nut, large size with overall dimensions 90mm x 140mm, clearance of hole 25.5 mm including taking down existing complete all as specified and directed.
Material and labour for shackle type porcelain vitreous white or brown insulator including GI straps washers, insulator bolts and nuts for working pressure 1100 volts, 75 mm hight, 90 mm dia, section of strip 30mmx3mm & dia of bolt 12 mm including taking down existing complete all as specified and directed .
Material and labour for aluminium conductor steel reinforced (ACSR) conductor of size 6/1 x 2.59 (Weasel) and 6/1 x 2.11 (Squirrel) or other existing type conductor ISI marked for LT over head lines on poles including stretching, tightening of poles insulator with winding wire of suitable size with insulator/streching of ACSR conductor including dismantling and taking down old unserviceable ACSR conductor complete all as specified and directed.
Material and labour for cross arms, bracings, supports, clamps and back plates fabricated from structural steel section incl nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape of size as indicated or directed and inclusive of one primercoat, one under coat and one finishing coat of paint incl dismantling and taking down old complete all as specified and directed.
Indoor/outdoor end termination joint heat shrinkable 1100 Volts for XLPE cable of size 3.5/4.0 x 10-50 Sqmm including taking down existing complete all as specified and directed.
Indoor/outdoor end termination joint heat shrinkable 1100 Volts for XLPE cable of size 3.5 x 70-150 Sqmm including taking down existing complete all as specified and directed.
Indoor/outdoor end termination joint heat shrinkable 1100 Volts for XLPE cable of size 3.5 x 185-300 Sqmm including taking down existing complete all as specified and directed.
Indoor/outdoor end termination joint heat shrinkable 1100 Volts for XLPE cable of size 3.5 x 400 Sqmm including taking down existing complete all as specified and directed.
Straight through joint heat shrinkable 1100 Volts for XLPE cable of size 3.5 x 35-150 Sqmm including taking down existing complete all as specified and directed. Note: The quoted rate shall include the earth work, RF and removal of soil etc.
Straight through joint heat shrinkable 1100 Volts for XLPE cable of size 3.5 x 185-400 Sqmm including taking down existing complete all as specified and directed. Note: The quoted rate shall include the earth work, RF and removal of soil etc.
Material and labour for earthing complete with galvanised earth plate electrode 600mmx600mmx6mm thick surrounded by charcoal and salt, buried directly in ground vertically in a pit of depth not less than 2.25m below ground level with top edge of the earth plate not less than 1.5m below normal ground level, connected to 25x4 mm GI strip earth lead by means of bolts, nuts, checks nut and washers made out of galvanized iron or steel, earth wire protected by galvanized steel pipe 40mm bore (light grade) and connected to main switch or main control board all as shown in electrical plate No.3 of SSR Part-I & including necessary excavation and earth work. The rate also include charcoal & salt in alternate layers, 20mm bore GI pipe medium grade) for watering and 40mm bore GI protection pipe, funnel, wire mesh, cast iron cover and frame etc, including testing on completion and dismantling of old u/s earthing complete all as specified and directed. Note: The quoted rate shall include the cost of earth work, GI pipe for watering, GI protection pipe, funnel, wire mesh, RCC cover, etc. complete. RCC cover shall be 50mm thick in 1:2:4 type B-1 using 8mm bars @10cm c/c both way.
Material & labour earthing complete with galvanized steel earth electrode plate of size 600x600x6mm thick buried directly in ground/earth pit not less than 2.25 mtr deep below normal ground level and top edge of earth electrode not less than 1.5 mtr below normal ground level and connected with GI earth wire of size 4 mm by means of nut, bolts, washers etc to eqpt/machinery all as shown in electric plate No 3 of SSR Pt I including PCC (1:3:6) pit, pit cover 50mm thick RCC 1:2:4 type B-1 using 8mm tor steel bars @10cm C/C both ways, 20 mm bore medium grade GI protection pipe, watering pipe 20mm bore medium grade, funnel, wire mesh, also including earth work, common salt, charcoal dust including dismantling of old u/s earthing complete all as specified and directed.
Material and labour for Insulation cover for overhead conductor a medium voltage wrap around line cover that provides retrofit insulation for overhead conductors to prevent electrical outages caused by trees or wildlife coming into the contact with distribution lines.It is manufactured from high quality non tracking polyolefin material. Insulation cover is designed to insulate existing bare lines without any extra cost. Installation is easy by using the split insulation tube tool which remains stationary at single location compete all as specified and directed. Note: (i) The quoted rate shall be included of all types accessaries which used to insulation cover for overhead conductor all as directed.
Supply and fixing MCCB TPN 630 Amps, 415 Volts, 50 KA, 4 pole , Ics=100% Icu, overload adjustable short circuit adjustable type and taking out existing complete all as specified and directed.
All as per item ser No 45 here in before but MCCB TPN 400 Amps, 415 Volts, 36 KA, 4 pole complete all as specified and directed.
All as per item ser No 45 here in before but MCCB TPN 320/315 Amps, 415 Volts, 36 KA, 4 pole complete all as specified and directed.
All as per item ser No 45 here in before but MCCB TPN 250 Amps, 415 Volts, 25 KA, 4 pole complete all as specified and directed.
All as per item ser No 45 here in before but MCCB TPN 200 Amps, 415 Volts, 25 KA, 4 pole complete all as specified and directed.
All as per item ser No 45 here in before but MCCB TPN 160 Amps, 415 Volts, 16 KA, 4 pole complete all as specified and directed.
All as per item ser No 45 here in before but MCCB TPN 100/125 Amps, 415 Volts, 16 KA, 4 pole complete all as specified and directed.
Material and labour for detecting of fault in cable HT/LT with fault locator equipment which is capable to supply as per cable of HT/LT (11 KV/430 Volts) serviceable to cable with Straight through joint of size 70-300 Sqmm complete all as specified and as directed. Note:- (a) The HT fault which is detected through cable fault locator will only be paid under this item including transportation charges deemed to be included in the quoted rate. (b) Charge of cable fault locator and DG set, transportation charge deemed to be included in the quoted rate. (c) Earth fault locator will be provided by the contractor for even single HT fault and no delay on this account will be acceptable otherwise penalty will levied Rs. 500/- per hour.
Supply and fixing of LT line separators 1100 V grade PVC spacer to separate LT conductor from each other 5 line as per IS including taking out existing complete all as specified and directed.
All as per item ser No 53 here in before but 4 line complete all as specified and directed.
Re-streching of loose over head ACSR conductor of any type/GI wire and repair of the broken conductors and adding new length (if required) in place of old and burnt conductor of any size on existing poles with proper sagging including winding with winding wire complete all as specified and directed. (Old conductor shall be reused where required for repairing broken length of conductor)
Trimming of Tree branches falls into OH lines of HT/LT & minimum clearance of 3 Mtr from branches ,proper shutdown will be taken and maintained in the register complete all as specified and directed.
Material and labour in replacement of aluminium terminals (thimbles) after cutting the worn out/faulty cable end from LT pillar/panel box including necessary earth work for taking out the cable from loop line, returning, filling in and making cable lead by providing aluminium lugs including crimping with crimping tools in the existing LT cable 16 Sqmm 4 core upto 50 Sqmm & necessary connection complete all as specified and directed.
All as per item ser No 57 here in before but of size of LT cable 70 Sqmm 3.5 core upto 120 Sqmm 3.5 core complete all as specified and directed.
All as per item ser No 57 here in before but of size of LT cable 150 Sqmm 3.5 core upto 240 Sqmm 3.5 core complete all as specified and directed.
All as per item ser No 57 here in before but of size of LT cable 300 Sqmm 3.5 core upto 400 Sqmm 3.5 core complete all as specified and directed.
Material and labour for shifting heavy items / excavation / cleaning areas / cleaning site by providing crane/hydra/excavators/tractors/trolley etc as required at site complete, all as specified and directed.
Material & Labour for painting on complete LT panels/Feeder Pillar Boxes of any size and any type two coats of synthetic enamel aluminium paint on outer shell and inner shell over a coat of red oxide primer including stand complete all as specified and directed.
Repair of LT panel of any type and any size including replacement of old unsv items such as busbar, insulaor, CT/PT coils, insulating sleaves, front and rear doors, door hinges, gland, lugs volt meter, ammeter, indicator, locking arrangement and internal copper wiring after cleaning of surface including removing rusted particles removing dust tightening nut, bolts welding complete all as specified and directed. Note: (i) Cost of marking description on the front door as per direction of Engr-in-Charge is incl in quoted rate (ii) Cost of misc items like copper cable, lugs thimbles etc if required are included in quoted rates. (iii) Cost of welding works such as hinges, locking arrangement, door and angles are included in qouted rates.
Material & Labour for surface cleaning of LT steel tubular poles 9 mtrs long including removing rusted particles painting with two coats of synthetic enamel aluminium paint over a coat of red oxide including stand cross arms, bracing, supports,clamps eye hooks, security light bracket clamps etc providing black & white strips alternatively 30cm each from coping upto 1.5 mtr height starting with black strip using synthetic enamel paints incl repairing and painting on coping with cement base white paint complete all as specified and directed. Note: (i) The quoted rate shall includes marking of numbers on each LT pole as per direction of Engr-in-Charge. (ii) The quoted rates shall including the repairing of coping with cement / PCC
Material & Labour for cement base paint for PCC pole 9 mtr including black & white strips alternatively 30cm each from coping upto 1.5 mtr height starting with black strip using synthetic enamel paint and painting with two coats of synthetic enamel aluminium paint over a coat of red oxide including cross arms bracing supports, clamps, eye hooks, security light bracket, clamp etc incl repairing and painting on coping with cement base white paint complete all as specified and directed. Note: (i) The quoted rate shall includes marking of numbers on each LT pole as per direction of Engr-in-Charge. (ii) The quoted rates shall including the repairing of coping with cement / PCC
Material and labour for spraying chemical (Round up) on area to remove unwanted vegitation/grass at various locations complete all as specified and directed.
Supply and fixing of on load change over switch with sheet steel Enclosure 415 V, 4 pole, 100 Amps capacity fixed on walls for electric supply distribution between main and DG set incl necessary connection of cable from LT panels to change over switches including taking down existing complete all as specified and directed.
Supply and fixing of on load change over switch with sheet steel Enclosure 415 V, 4 pole, 200 Amps capacity fixed on walls/MS frame/pole/LT panel for electric supply distribution between main and DG set incl necessary connection of cable from LT panels to change over switches including taking down existing complete all as specified and directed.
Supply and fixing of on load change over switch with sheet steel Enclosure 415 V, 4 pole, 320 Amps capacity fixed on walls/MS frame/pole/LT panel for electric supply distribution between main and DG set incl necessary connection of cable from LT panels to change over switches including taking down existing complete all as specified and directed.
Material & Labour for Chemical spray (DC>2.26 having container 415 ml/300g for precision blended multipurpose product to prevent corrosion penetrates, lubricants, displaces and seals out moisture release rusted mechanisum cleaness etc complete all as specified and directed.
Supply and fixing or passing through PVC conduit pipe of 1100 volts grade heavy duty, PVC insulated round 3 core 2.5 sqmm copper cable including electrical connection suitable size of lugs,nuts and bolts including taking down existing complete all as specified and directed.
Supply and fixing or passing through PVC conduit pipe of single core PVC unsheathed multi stranded copper cable (FRLS) 1.5 Sqmm nominal cross sectional area 1100 volts conforming to IS 694 including electrical connection suitable size of lugs,nuts and bolts including taking down existing complete all as specified and directed.
Supply and fixing or passing through PVC conduit pipe of single core PVC unsheathed multi stranded copper cable (FRLS) 2.5 Sqmm nominal cross sectional area 1100 volts conforming to IS 694 including electrical connection suitable size of lugs,nuts and bolts including taking down existing complete all as specified and directed.
Supply, installing, testing & commissioning of factory fabricated outdoor type feeder pillar board of size 700X600X500 mm , outer shell made out of 3.15 mm thick CRCA sheet and inner shell made out of 2 mm thick CRCA sheet and MS angle section 50x50x6 mm mounted on PCC 1:2:4 type B-1 platform 60 cm above and 45 cm below the ground level, frame factory fabricated with front openable double door system and cable alloy (Each door hinged with body at 3 places with body and hinges should be welded with body and door) lockable/open able with arrangement of pad locking on door 01 no of pad lock of three keys shall be used to make the outer shell completely vermin proof suitable for 3 phase 4 wire 415 Volt, 50 Hz, tested at factory approved from CPRI factory fabricated having modern fabrication and testing process followed by powder coated painting after 7-tank pre treatement control & power wiring with suitable size of copper conductor along with suitable gasket to make it dust/vermin proof and general construction confirming to IS:61439/2011 Part-1 and part -2 type test certificate with not less than IP-56 and breaking capacity 65 KA including taking down existing comprising of the following :- (a) MCCB 125 Amps TPN, 25 KA -01 No (b) Aluminium busbar of capacity 200 Amps with colour coated heat shrinkable sleeve and suitable hole for out going connection - Set of four. (c) Misc items like screws, cable tie, copper cable 1.5/2.5 Sqmm, cable lugs, sleeves, glands etc complete are included in quoted rates
Supply, installing, testing & commissioning of outdoor type cubical panel board of size 1.2mX1.2mX.55m, outer shell made out of 3.15 mm thick CRCA sheet and inner shell made out of 2 mm thick CRCA sheet and MS angle section 50x50x6 mm mounted on PCC 1:2:4 type B-1 platform block type 60 cm above ground level and 30 cm grouting in ground, frame factory fabricated with front and back openable double door system and cable alley (Each door hinged with body at 3 places with body and hinges should be welded with body and door) lockable/open able with arrangement of pad locking on both doors incl 2 no. of pad locks of three keys shall be used to make the outer shell completely vermin proof suitable for 3 phase 4 wire 415 Volt, 50 Hz, incl AL bus bar of 600 A , tested at factory approved from CPRI factory fabricated having modern fabrication and testing process followed by powder coat painting having thickness not less than 100 microns provided with suitable gasket/gland to make it dust/vermin proof and general construction confirming to IS:61439/2011 Part-1 and part -2 type test certificate with not less than IP-65 including taking down existing panel comprising of the following :- (a) MCCB 400 Amps, 36 KA 4 pole 415 Volts AC, adjustable type, (incoming)-01 No. (b) MCCB 160 Amp, 415 volt, 4 pole, breaking capacity 25 KA , adjustable type (Outgoing)-02 Nos. (c) MCCB 100 Amp, 415 volt, 4 pole, breaking capacity 16 KA , adjustable type (Outgoing)-02 Nos. (d) RYB indication LED type, 22.5 mm dia, protected with MCB SP 2 Amp showing 3 phase supply -03 Nos (e) Digital Ammeter of range 0-500 A, auxiliary voltage 230 volts -01 Nos (f) Volt meter of range 0-500 Volts, auxiliary voltage 230 volts -1 No (g) Misc items like screws, cable tie, copper cable 1.5/2.5 Sqmm, cable lugs, sleeves, glands, suitable CTs etc complete are included in quoted rates.
All as per item ser No 76 here in before but of size 1.4mX.9mX.5m, comprising of the following :- (a) TPN Aluminium bus bar 400 Amps insulated with colour coded heat shrinkable sleeve and shall be mounted on suitable size F class insulators not less than 1 metre long. (b) MCCB 250 Amps, 25 KA 4 pole 415 Volts AC, adjustable type, (incoming)-01 No. (c) MCCB 200 Amp, 415 volt, 4 pole, breaking capacity 25 KA , adjustable type (Outgoing)-01 Nos. (d) MCCB 125 Amp, 415 volt, 4 pole, breaking capacity 16 KA , adjustable type (Outgoing)-02 Nos (e) MCB 32 Amp, 415 volt, TPN, breaking capacity 10 KA (Outgoing)-01 Nos (f) RYB indication LED type, 22.5 mm dia, protected with MCB SP 2 Amp showing 3 phase supply -03 Nos (g) Digital Ammeter of range 0-500 A, auxiliary voltage 230 volts -01 Nos (h) Volt meter of range 0-500 Volts, auxiliary voltage 230 volts -1 No (j) Misc items like screws, cable tie, copper cable 1.5/2.5 Sqmm, cable lugs, sleeves, cable glands, suitable CTs etc complete are included in quoted rates.
All as per item ser No 76 here in before but of size 1.2mX1.2mX.5m, comprising of the following :- (a) TPN Aluminium bus bar 630 Amps insulated with colour coded heat shrinkable sleeve and shall be mounted on suitable size F class insulators not less than 1 metre long. (b) MCCB 400 Amps, 36 KA 4 pole 415 Volts AC, adjustable type, (incoming)-01 No. (c) MCCB 200 Amp, 415 volt, 4 pole, breaking capacity 25 KA , adjustable type (Outgoing)-02 Nos. (d) MCCB 125 Amp, 415 volt, 4 pole, breaking capacity 16 KA , adjustable type (Outgoing)-02 Nos. (e) RYB indication LED type, 22.5 mm dia, protected with MCB SP 2 Amp showing 3 phase supply -03 Nos (f) Digital Ammeter of range 0-500 A, auxiliary voltage 230 volts-01 Nos (g) Volt meter of range 0-500 Volts, auxiliary voltage 230 volts -1 No (h) Misc items like screws, cable tie, copper cable 1.5/2.5 Sqmm, cable lugs, sleeves, cable glands,suitable CTs etc complete are included in quoted rates.
All as per item ser No 76 here in before but of size 1.0mX0.9mX.5m, comprising of the following :- (a) TPN, Aluminium bus bar 400 Amps insulated with colour coded heat shrinkable sleeve. (b) Incoming MCCB 4 pole 200 Amp 25 KA -01 No (c) Out going MCCB TPN 63 Amps - 04 Nos (d) RYB indication LED type, 22.5 mm dia, protected with MCB SP 2 Amp showing 3 phase supply -03 Nos (e) Digital Ammeter of range 0-500 A, auxiliary voltage 230 volts-01 Nos (f) Volt meter of range 0-500 Volts, auxiliary voltage 230 volts -1 No (g) Misc items like screws, cable tie, copper cable 1.5/2.5 Sqmm, cable lugs, sleeves, cable glands, suitable CTs etc complete are included in quoted rates.
All as per item ser No 76 here in before but of size 1.2mX1.2mX.5m, comprising of the following :- (a) TPN Aluminium bus bar 600 Amps insulated with colour coded heat shrinkable sleeve and shall be mounted on suitable size F class insulators not less than 1 metre long. (b) MCCB 400 Amps, 36 KA 4 pole 415 Volts AC, adjustable type, (incoming)-01 No. (c) MCCB 200 Amp, 415 volt, 4 pole, breaking capacity 25 KA , adjustable type (Outgoing)-02 Nos. (d) MCCB 100 Amp, 415 volt, 4 pole, breaking capacity 16 KA , adjustable type (Outgoing)-02 Nos. (e) RYB indication LED type, 22.5 mm dia, protected with MCB SP 2 Amp showing 3 phase supply -03 Nos (f) Digital Ammeter of range 0-500 A, auxiliary voltage 230 volts-01 Nos (g) Volt meter of range 0-500 Volts, auxiliary voltage 230 volts -1 No (h) Misc items like screws, cable tie, copper cable 1.5/2.5 Sqmm, cable lugs, sleeves, cable glands,suitable CTs etc complete are included in quoted rates.
All as per item ser No 76 here in before but of size 1.2mX0.9mX.6m, comprising of the following :- (a) TPN Aluminium bus bar 600 Amps insulated with colour coded heat shrinkable sleeve and shall be mounted on suitable size F class insulators not less than 1 metre long. (b) MCCB 400 Amps, 36 KA 4 pole 415 Volts AC, adjustable type, (incoming)-01 No. (c) MCCB 125 Amp, 415 volt, 4 pole, breaking capacity 16 KA , adjustable type (Outgoing)-04 Nos. (d) RYB indication LED type, 22.5 mm dia, protected with MCB SP 2 Amp showing 3 phase supply -03 Nos (e) Digital Ammeter of range 0-500 A, auxiliary voltage 230 volts-01 Nos (f) Volt meter of range 0-500 Volts, auxiliary voltage 230 volts -1 No (g) Misc items like screws, cable tie, copper cable 1.5/2.5 Sqmm, cable lugs, sleeves, cable glands,suitable CTs etc complete are included in quoted rates.
Notes for item Sr No. 74 to 81 (i) The quoted rate shall include minor items such as lugs, nuts, bolts, washers, top insulators, sleeves, provision of extra holes in bus bar etc. (ii) All internal wiring shall be done with suitable size of PVC insulated solid copper conductor FRLSH cable conforming to IS-694. (iii) Panel drawing shall be got approved before placing of order from Engr-in-Charge/GE. (iv) The bus bar connection for cable from main bus bar to outgoing MCCB will be connected through suitable rating bus bar strip type duly insulated. (v) Cable will be entered in panels through glands. (vi) Cost of marking description and matter on the front door as specified and directed by Engr-in-Charge is incl in quoted rate.
Supplying and laying of synthetic Rubber insulated mats 2.5 mm thick for voltage upto 11 kv for electrical purpose as per IS 15652-2006, (superseding IS 5424) suitable for electrical shock safety of sizes 10m x 1m including taking of existing complete all as specified and diercted.
Material and labour for cable jointing kit 11 KV (Earthed) grade cable for straight through heat shrinkable type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 50 sqmm to 95 sqmm incl taking down old unsv HT joint complete all as specified and diercted.
Material and labour for cable jointing kit 11 KV (Earthed) grade cable for straight through heat shrinkable type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 120 sqmm to 185 sqmm incl taking down old unsv HT joint complete all as specified and diercted.
Material and labour for cable end termination jointing kit HT 11 KV grade earthed system (heat shrinkable) outdoor type complete with jointing material suitable for HT XLPE cable 50-95 sqmm 3 core 11 KV grade earthed system incl taking down old unsv HT joint complete all as specified and diercted.
Material and labour for cable end termination jointing kit HT 11 KV grade earthed system (heat shrinkable) outdoor type complete with jointing material suitable for HT XLPE cable 120-185 sqmm 3 core 11 KV grade earthed system incl taking down old unsv HT joint complete all as specified and diercted.
Material and labour for broken earth pit of size 300x300x300 mm made of PCC 1:2:4 type B1 using 20 mm graded crushed stone aggregate, and earth pit cover made out of RCC 1:2:4 type B1, cover reinforced with 8 mm dia TMT bars @ 100 mm centre to centre both ways with handle made out of 8 mm dia bar, watering arrangement with funnel and wire mesh and including reconnecting of earth lead of any type with new nuts, bolts and washers as required at site with testing result including demolition of existing complete all as specified and diercted.
Material and labour for repairs of stay by tightening of stay wire after untying the conductor spans from the poles to make correct tensions and maintain verticality of poles, including re-jointing the conductors in position with new binding wire complete all as specified and diercted.
Repairing of existing unserviceable PCC coping of LT/HT pole by breaking completely, material and labour for PCC 1:2:4 type B1, (using 20mm graded crushed stone aggregate) of size 600X600X300mm including form work and applying two coats of cement base paint complete all as specified and diercted.
Supply and fixing Indicator red/yellow/green including making electrical connection with suitable size of copper lugs duly crimped including taking out old u/s indicator complete all as specified and directed.
Taking down wooden chowkats or frames area not exceeding 1.50 Square metre (w/o taking off shutters from frames) and removing from site, including cutting holes for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces to match with existing finish complete all as specified and as directed.
Supply and fixing of steel window box type using ERW hollow 'P' section comprising double frame including gauged and glazed Skelton shutter 30mm thick, jointed internally with flat iron 25x3mm complete including hinges, handle, tower bolts, stops, lugs etc. all as shown on CECZ Chandigarh drawing No.. TD-219(c) sheet 1/3 to 3/3 and TD-220(c) sheet 1/3 to 3/3 as applicable complete all as speified and directed. Note: (i) For the purpose of measurement and payment double shutter with frame shall be considered as one unit. (ii) Unit rate quoted against this item shall also include the iron mongery and grill 10 mm square bar irrespective of whatever shown on drawing. (iii) Glazing, wire mesh and painting shall be measured and paid for separately.
Supply and fixing for stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm fixed with stainless steel wire staple or fixing with beads to wooden joinery when fixed in panels of joinery, complete all as specified and directed.
Supply and fixing for sheet glass 3mm thick, ordinary quality and glazing with oil putty, in square n.exc 0.5 Sqm each pane and glazing with oil putty to steel window with wooden beads to wooden shutters, complete all as specified and directed.
Dismantling of brick work or stone masonary, precast cement concrete walling built in cement mortar including all quoins, arches, pillars etc. complete all as specified and directed.
Material and labour for brick work with sub class ‘B’ bricks burnt, straight or curved on plan exceeding 6 metre mean radius built in cement mortar (1:6), complete all as specified and directed.
Material and Labour for Brick work with sub class ‘B’ bricks (Except Bricks), straight or curved on plan exceeding 6 metre mean radius, built in cement mortar (1:6), complete all as specified and directed. (Note- The serviceable bricks obtained from Serial item No- 97 Shall be used after removing motar, cleaning the bricks with water, etc.)
Material and labour for Chequered cement concrete tiles, rubber moulded 200mm x 200mm x 25mm thick, set, jointed and pointed in neat cement slurry with grey cement with pigment in floors over 15mm thick screed bed in CM (1:6) complete all as specified and directed.
Material and labour for vibratory compactive, precast cement concrete rubber moulded, coloured ( except grey colour), interlocking designer paver blocks in Milano shape, comfirming to IS-15658-2006 of 60 mm thickness, M-35 grade, as in path, harding standing, etc laid over and including 25 mm compacted sand cushioning, including surface excavation over area n. exc. 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil and removing excavated soil exc. 50 mtr but n. exc. 250 mtr, complete all as specified and directed.
Material and labour for 75mm thick PCC 1:4:8, type D2 (using 40mm graded stone aggregate) as in sub base of floor complete all as specified and directed
Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed.
Material and labour for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finishing the surface fair and even smooth without using extra cement complete all as specified and directed.
Material and labour for preparation and applying three coats of white wash on new plastered surface of wall complete all as specified and directed.
Material and labour for 100mm thick PCC 1:4:8, type D2 (using 40mm graded stone aggregate) as in sub base complete all as specified and directed.
Supply and fixing LT Air Circuit Breaker, 4 pole, manual drawout type, 415 volt with microprocessor release IPRE, 800 Amp, Icu=Ics=Icw (1s)=50 KA, neutral overload protection , inbuilt temp protection upto 90 degree Celcious, rotatable terminals for horizontal/vertical orientation, fast operation and fixing the same in existing panel board including necessary modification with angle iron and plain sheet including taking down existing complete all as specified and directed.
Supply and fixing LT Air Circuit Breaker, 4 pole, manual drawout type, 415 volt with microprocessor release IPRE, 1000 Amp, Icu=Ics=Icw (1s)=50 KA, neutral overload protection , inbuilt temp protection upto 90 degree Celcious, rotatable terminals for horizontal/vertical orientation, fast operation and fixing the same in existing panel board including necessary modification with angle iron and plain sheet including taking down existing complete all as specified and directed.
Material and labour for Isolating LT ACBs 630-1000 Amps capacity and testing its operation, tripping devices , mechanical system , setting the ACBs, right clearing, servicing and recharging complete unit including taking down existing complete all as specified and directed. The Make of existing ACBs are Legrand/Crompton/ Schenider/Havells/ABB ( Note : Provision of new spare parts as required shall be measured and paid separately.)
On/Off Button ACB complete all as specified and directed.
Spring Charge Indicator ACB complete all as specified and directed.
Trip indication switch complete all as specified and directed.
Under voltage release complete all as specified and directed.
Electronic protection Units complete all as specified and directed.
Real terminals flat connections with bar complete all as specified and directed.
Shunt Trip/Closing Coil (415V) complete all as specified and directed.
Earth fault relay 3 phase 3 wire complete all as specified and directed.
Aux contact block 3 No 3 NC complete all as specified and directed.
Micro switch for unserviceable trip indication complete all as specified and directed.
Phase barrier 3 P complete all as specified and directed.
Mechanical Interlock complete all as specified and directed.
Fixed Arcing contact 3P complete all as specified and directed.
Moving Arcing contact 3P complete all as specified and directed.
Supply and fixing of rolled mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment Fe-290 (Gde E- 165) for existing LT panel doors/gates including taking down existing complete all as specified and directed.
Supply and fix of danger notice plate of 1.6mm thick mild steel sheet, vitreous enamelled red, with letters, figures and conventional skull and bones in signal white colour and fixed with M.S. clamps, bolts and nuts of approved size, for LT, 20x15cm size including taking down existing complete all as specified and directed.
Supply and fixing of cable route indicator or cable joint mark for 1100 volts made out of mild steel 100mm dia 6mm thick plate welded to 40x40x6mm angle iron 60 cm long embeded in PCC 1:3:6 type C-2 (using 20mm graded stone aggregate) block size of 150mm x 200mm x 200mm including applying two coats of synthetic enamel paint over a coat of redoxide primer on steel surfaces including taking down existing complete all as specified and directed.
Material & Labour for steel nuts, bolts, washers of any size required at site including taking down existing complete all as specified and directed.
Material & Labour for disconnecting and connecting of LT service wires and XLPE cables of any type and any size from LT panel, MCCBs, DBs, over head conductor, LT poles, street light timer including replacement of old unsv items such as nuts, bolts, thimbles, insulating seleaves and existing misc items etc, and after cleaning and removing of carbon on cables end surface including removing rusted particles, removing dust tightening nut, bolts complete all as specified and directed. Note : (i) Cost of all tools and ladder required for maintenanne of LT service wires and XLPE cable end connection and disconnection is included in quoted rate (ii) Cost of misc items like nuts, bolts, thimbles, insulating seleaves etc if required are included in quoted rates.
Supply & Fixing of extended spreaders link should be installed both side with exisitng/new MCCBs 4P/3P of any capacity with existing LT panels including taking down existing complete all as specified and directed.
Supply, fixing and testing of auto day/night on and off photo cell, LDR sensor switch 6 amps for lighting on/off, water proof 220 volt 50 Hz, AC supply, Model No Quick Sense QS-301 complete with all accessories internally pre-wired including connection with 1.5 Sqmm copper conductor from main supply to sensor, sensor to fittings including taking down existing complete all as specified and directed.
Supply & Fixing of bracket made out of GI tubing single piece not welded, bended at proper angle of size 40mm dia, light grade 1.5 mtr long including painting with aluminium paint over one coat of red oxide primer to the bracket including taking down existing complete all as specified and directed.
Note:- Amount of credit of Rs. 130198.00 for retrieved materials is mentioned in Schedule of Credit of tender documents in PDF form which will be deducted offline while acceptance of tender.
M/S Sonu Traders
The Rahul Vig
R. P. Suppliers and Construction Co.
KULWANT SINGH
u and v engineers and consultants
Saurav Enterprises
AR CONSTRUCTIONS
Esha Engineers
M/s Friends Engineering Works
Mohinder Pal and Sons
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .