Special Repairs Rejuvenation of bore wells and allied works at AFA Hyderabad

Supply, install, commissioning & testing of Motor Control Panel "In-door type" of appropriate size / dimensions, factory fabricated CPRI type-tested with suitable neoprene rubber gasket to make it completely dust & vermin proof & degree of protection not less than IP-43 & general construction confirming to IS-13947, double door, front & back openable. The panel shall be provided with ventilation facility in the form of louvers for better heat dissipation & high grade Aluminium bus-bar wrapped with coloured PVC tape/sleeves of rating in conformity to the Incoming MCCB/MCB rating. The panel board shall be fabricated out of 2 mm thick (for both outer & inner portions) CRCA sheet duly pre-treated & powder coated, supporting angle iron frame & MC channel base suitable for 3 Ph, 4 wire system 415/440 volts grade incl complete internal wiring with not less than 2.5 sqmm copper wire incl cable glands of suitable sizes incl suitable PCC (1:3:6) type C-2 foundation, necessary earthwork (if any) incl taking down old unsv one complete all as specified & as directed & to the entire satisfaction of the Engr-In-Charge with & incl the following accessories : [ For Swimming Pool ]

BUS-BAR & INTERNAL CONNECTIONS : The bus-bars shall be made up of 04 Nos high grade Aluminium 300 A rated, duly insulated with 1100 V grade standard colour coded PVC sleeves & rigidly mounted on suitable sized "F" class insulators of non-hygroscopic, non-combustible, all internal connections from main bus-bars to switch gears etc. PROVISION FOR CABLE ENTRY : The provision for cable entry/exit shall be provided in the bottom for both incoming & out-going cables with the help of glands matching the existing LT cable sizes. INCOMING : (a) MCCB 4P (Ics = 100% Icu) with thermal magnetic release, adjustable short circuit & adjustable overload setting,suitable for isolation, having breaking capacity 36 KA & of rating 134 to 200 A - 02 Nos. Make : Cat No : DZ4F0200DXD1AOOOO of Make L&T or techno-commercially equivalent of LEGRAND/SIEMENS. (b) COMPACT ENCLOSED ATS (Automatic Transfer Switch) suitable for inside panel mounting & I-O-II operation, 4 Pole, 200 A, confirming to IEC 60947-6-1 - 01 No complete with following features/specifications : (i) Double-Break Contact System offering High Short-time Withstand. (ii) Ample Space for Cable Termination. (iii) Ease of Generator Control (ON-OFF, Cooling Cycle Self-Test). (iv) Cyclic Event Logger. (v) Priority Source Selection. (vi) Adjustable Time Delay (0.1 Sec to 3 Hrs). (vii) Suitable for 3-Phase as well as 1-Phase sources. (viii) Protections - UV/OV, Phase Sequence, Single Phasing, Frequency. (ix) Terminal Shrouds, Phase Barriers & Source Separator etc. Make : Cat No CK90163BSOO of make L&T or techno-commercially equivalent of ABB/Siemens. OUTGOINGS : (a) MCCB 4P (Ics = 100% Icu) with thermal magnetic release, adjustable short circuit & adjustable overload setting,suitable for isolation, having breaking capacity 25 KA & of rating 50-63 A - 04 Nos. Make : Cat No : DZ0F0063CXC1AOOOO of Make L&T or techno-commercially equivalent of LEGRAND/SIEMENS. (b) MCB, TPN, 10KA, 230V, "C" curve, 06-32 A, ISI marked - 03 Nos (2W + 1S). Make : LEGRAND/ABB/SIEMENS (c) MCB, TP, 10KA, 230V, "C" curve, 06-32 A, ISI marked - 03 Nos (2W + 1S). Make : LEGRAND/ABB/SIEMENS (d) Three Phase Fully Automatic Star-Delta Starter perfectly suitable for Submersible Pumping Set of capacity upto 15 HP, conforming to IS/IEC : 60947-4-1, with & incl Single Phasing Protection (SPP), Phase Imbalance Protection, Phase Reversal Protection, Short Circuit Protection, FRLS Copper Internal Wiring, Combined or Individual Voltmere & Ammeter, Selector Switch, ON / OFF / TRIP Indications, Star-Delta Timer etc., Class-H Insulation with Contactor Rating AC3 (A) - 16/20A, Overload Relay Range - 13.2A to 20A incl testing complete. Make : BCHSIEMENS/L&T/HAVELLS - 04 Nos (3W + 1S) INSTRUMENTATION SYSTEM : (a) Digital type Multi-Function meter with built in selector Switch & 03 Nos CTs matching with the I/C breaker, Accuracy Class - 1.0, 3 phase, Size 96 x 96 mm - 04 Nos. Make : Cat No WL411010OOOO of make L&T or techno-commercially equivalent of ELMEASURE/SECURE. (b) Indicator lamp with integral circuit (230/240V) & cluster LED (Red, Orange, Blue) - 04 Sets. (c) Danger notice plate of size 20 x 15 cm of 1.6mm thick mild-steel sheet, vitreous enamelled white, with letters, figures and conventioinal skul and bones in signal-red colour and fixed with MS clamps, bolts and nuts of approved size, for LT conforming to IS-2551 - 02 Nos (Front & Back).

Supply, install, commissioning & testing of Motor Control Panel "Out-door type" of appropriate size / dimensions, factory fabricated CPRI type-tested with suitable neoprene rubber gasket to make it completely dust & vermin proof & degree of protection not less than IP-55 & general construction confirming to IS-13947, double door, front & back openable. The panel shall be provided with ventilation facility in the form of louvers for better heat dissipation & high grade Aluminium bus-bar wrapped with coloured PVC tape/sleeves of rating in conformity to the Incoming MCCB/MCB rating. The panel board shall be fabricated out of 3.15 mm thick (for outer portions) & 2.0 mm thick (for inner portions) CRCA sheet duly pre-treated & powder coated, supporting angle iron frame & MC channel base suitable for 3 Ph, 4 wire system 415/440 volts grade incl complete internal wiring with not less than 2.5 sqmm copper wire incl cable glands of suitable sizes incl suitable PCC (1:3:6) type C-2 foundation, necessary earthwork (if any) incl taking down old unsv one complete all as specified & as directed & to the entire satisfaction of the Engr-In-Charge with & incl the following accessories : [ IOC Borewell & Receiving Borewell ]

BUS-BAR & INTERNAL CONNECTIONS : The bus-bars shall be made up of 04 Nos high grade Aluminium 100 A rated, duly insulated with 1100 V grade standard colour coded PVC sleeves & rigidly mounted on suitable sized "F" class insulators of non-hygroscopic, non-combustible, all internal connections from main bus-bars to switch gears etc. PROVISION FOR CABLE ENTRY : The provision for cable entry/exit shall be provided in the bottom for both incoming & out-going cables with the help of glands matching the existing LT cable sizes. INCOMING : (a) MCCB 4P (Ics = 100% Icu) with thermal magnetic release, adjustable short circuit & adjustable overload setting,suitable for isolation, having breaking capacity 25 KA & of rating 50-63 A - 02 Nos. Make : Cat No : DZ0F0063CXC1AOOOO of Make L&T or techno-commercially equivalent of LEGRAND/SIEMENS. (b) Manual On-Load Change-Over Switch, Open Execution Type suitable for inside panel horizontal / vertical mounting, 4 Pole, 125 A, confirming to IS/IEC 60947-3, complete with Terminal Shrouds, Source Separator, Phase Barriers, Extended Handle (if required) & Staggered Terminals - 01 No. Cat No : CO21250OOOO of make L&T or techno-commercially equivalent of ABB/Siemens. OUTGOINGS : (a) MCB, TPN, 10KA, 415V, "C" curve, 40-63 A, ISI marked - 02 Nos (1W + 1S). Make : LEGRAND/ABB/SIEMENS (b) Three Phase Fully Automatic Star-Delta Starter perfectly suitable for Submersible Pumping Set of capacity upto 15 HP, conforming to IS/IEC : 60947-4-1, with & incl Single Phasing Protection (SPP), Phase Imbalance Protection, Phase Reversal Protection, Short Circuit Protection, FRLS Copper Internal Wiring, Combined or Individual Voltmere & Ammeter, Selector Switch, ON / OFF / TRIP Indications, Star-Delta Timer etc., Class-H Insulation with Contactor Rating AC3 (A) - 16/20A, Overload Relay Range - 13.2A to 20A incl testing complete. Make : BCHSIEMENS/L&T/HAVELLS - 02 Nos (1W + 1S) INSTRUMENTATION SYSTEM : (a) Digital type Multi-Function meter with built in selector Switch & 03 Nos CTs matching with the I/C breaker, Accuracy Class - 1.0, 3 phase, Size 96 x 96 mm - 02 Nos. Make : Cat No WL411010OOOO of make L&T or techno-commercially equivalent of ELMEASURE/SECURE. (b) Indicator lamp with integral circuit (230/240V) & cluster LED (Red, Orange, Blue) - 02 Sets. (c) Danger notice plate of size 20 x 15 cm of 1.6mm thick mild-steel sheet, vitreous enamelled white, with letters, figures and conventioinal skul and bones in signal-red colour and fixed with MS clamps, bolts and nuts of approved size, for LT conforming to IS-2551 - 02 Nos (Front & Back).

Supply, install, commissioning & testing of Motor Control Panel "In- door type" of appropriate size / dimensions, factory fabricated CPRI type-tested with suitable neoprene rubber gasket to make it completely dust & vermin proof & degree of protection not less than IP-43 & general construction confirming to IS-13947, double door, front & back openable. The panel shall be provided with ventilation facility in the form of louvers for better heat dissipation & high grade Aluminium bus-bar wrapped with coloured PVC tape/sleeves of rating in conformity to the Incoming MCCB/MCB rating. The panel board shall be fabricated out of 2 mm thick (for both outer & inner portions) CRCA sheet duly pre-treated & powder coated, supporting angle iron frame & MC channel base suitable for 3 Ph, 4 wire system 415/440 volts grade incl complete internal wiring with not less than 2.5 sqmm copper wire incl cable glands of suitable sizes incl suitable PCC (1:3:6) type C-2 foundation , necessary earthwork (if any) incl taking down old unsv one complete all as specified & as directed & to the entire satisfaction of the Engr-In-Charge with & incl the following accessories : [ Twin Hanger Borewell ]

BUS-BAR & INTERNAL CONNECTIONS : The bus-bars shall be made up of 04 Nos high grade Aluminium 200 A rated, duly insulated with 1100 V grade standard colour coded PVC sleeves & rigidly mounted on suitable sized "F" class insulators of non-hygroscopic, non-combustible, all internal connections from main bus-bars to switch gears etc. PROVISION FOR CABLE ENTRY : The provision for cable entry/exit shall be provided in the bottom for both incoming & out-going cables with the help of glands matching the existing LT cable sizes. INCOMING : (a) MCCB 4P (Ics = 100% Icu) with thermal magnetic release, adjustable short circuit & adjustable overload setting,suitable for isolation, having breaking capacity 36 KA & of rating 67 to 100 A - 02 Nos. Make : Cat No : DZ1F0100DXD1AOOOO of Make L&T or techno-commercially equivalent of LEGRAND/SIEMENS. (b) Compact Enclosed ATS (Automatic Transfer Switch) suitable for inside panel mounting & I-O-II operation, 4 Pole, 125 A, confirming to IEC 60947-6-1 - 01 No complete with following features/specifications : (i) Double-Break Contact System offering High Short-time Withstand. (ii) Ample Space for Cable Termination. (iii) Ease of Generator Control (ON-OFF, Cooling Cycle Self-Test). (iv) Cyclic Event Logger. (v) Priority Source Selection. (vi) Adjustable Time Delay (0.1 Sec to 3 Hrs). (vii) Suitable for 3-Phase as well as 1-Phase sources. (viii) Protections - UV/OV, Phase Sequence, Single Phasing, Frequency. (ix) Terminal Shrouds, Phase Barriers & Source Separator etc. Make : Cat No CK90161BSOO of make L&T or techno-commercially equivalent of ABB/Siemens. OUTGOINGS : (a) MCB, TPN, 10KA, 415V, "C" curve, 40-63 A, ISI marked - 03 Nos (2W + 1S). Make : LEGRAND/ABB/SIEMENS (b) Three Phase Fully Automatic Star-Delta Starter perfectly suitable for Submersible Pumping Set of capacity upto 15 HP, conforming to IS/IEC : 60947-4-1, with & incl Single Phasing Protection (SPP), Phase Imbalance Protection, Phase Reversal Protection, Short Circuit Protection, FRLS Copper Internal Wiring, Combined or Individual Voltmere & Ammeter, Selector Switch, ON / OFF / TRIP Indications, Star-Delta Timer etc., Class-H Insulation with Contactor Rating AC3 (A) - 16/20A, Overload Relay Range - 13.2A to 20A incl testing complete. Make : BCHSIEMENS/L&T/HAVELLS - 03 Nos (2W + 1S) INSTRUMENTATION SYSTEM : (a) Digital type Multi-Function meter with built in selector Switch & 03 Nos CTs matching with the I/C breaker, Accuracy Class - 1.0, 3 phase, Size 96 x 96 mm - 03 Nos. Make : Cat No WL411010OOOO of make L&T or techno-commercially equivalent of ELMEASURE/SECURE. (b) Indicator lamp with integral circuit (230/240V) & cluster LED (Red, Orange, Blue) - 03 Sets. (c) Danger notice plate of size 20 x 15 cm of 1.6mm thick mild-steel sheet, vitreous enamelled white, with letters, figures and conventioinal skul and bones in signal-red colour and fixed with MS clamps, bolts and nuts of approved size, for LT conforming to IS-2551 - 02 Nos (Front & Back).

IMPORTANT NOTES FOR ITEM NOS 1 TO 3 : 1) Design / drawing / BOM of the Panel Board incl all accessories showing the dimensions is to be obtained from the Manufacturer / Supplier & is to be got approved from the Engr-In-Charge & GE before placing final order to the manufacturer. 2) Anything missed out in the technical specifications but technically required for efficient working is deemed to be included in the quoted rates. 3) The electrical connection of digital Multi Functional Meter in the MCC panel is to be done from load side so that monitoring of various parameters viz. Voltage, Current, KW, KVA, power factor, frequency etc. can be done for both SEB mains & DG mains. 4) Necessary PCC foundation/plinth shall be as per the recommendations of OEM / Supplier etc. & cost of the same is deemed to be included in the quoted rates. 5) Purchase Vouchers & Test Certificates to be submitted in Original to Engr-In-Charge for checking & records.

Supply, install, commissioning & testing of Star Delta Starter with enclosure, fully automatic, 3 phase, 415 Volts, 50 Hz suitable for motor of upto 10 HP capacity perfectly matching with the existing system / panel assembly complete with O/V, U/V, O/L, SPP etc. safety features incl taking down unsv one complete all as specified and as directed & to the entire satisfaction of Engr-In-Charge. Make : L&T/ABB/SIEMENS/BCH/SCHNEIDER

Supply, Install, Commissioning & Testing of Submersible Pumping Set, electric driven, 3 Phase, suitable for 250 / 200 / 150 mm dia borewell (casing pipe of 250 / 200 / 150 mm dia) with & including High Quality Pump Oil Seal, High Grade SS Pump Casing, SS-410 Pump Shaft, SS Impeller, with head & discharge strictly as per site requirement & not less than 10 HP Motor, Dynamically Balanced Rotor, High Quality SS Motor Body, Low Watt Loss Stamping Motor Stator, PVC Coated Copper Winding, Delivery Pipe Size 65/50 mm, CED Coated CI Parts, Operating Voltage Range 350V to 440V & 01 Year OEM Warranty complete incl connected items incl taking down old unsv ones & depositing the same to the MES Storeyard complete all as specified and to the entire satisfaction of the Engr-In-Charge. Make : Kirloskar / KSB / CG / Havells

IMPORTANT NOTES FOR ITEM NOS 4 & 5 : 1) Design / Drawing / Technical specifications etc. of the complete Submersible Pumping Set & Starter is to be obtained from OEM / Auth Supplier / Dealer strictly keeping in view the actual ground / site requirement & the same is to be got approved from Engr-In-Charge & GE before placing final order to the manufacturer. 2) Anything missed out in the technical specifications but technically required for efficient working is deemed to be included in the quoted rates. 3) PVs & Test / Guarantee / Warantee Certificates to be submitted in Original to the Engr-In-Charge for checking & records.