C/O 16 Nos Tubewell 3 Nos GP Danda 4 Nos GP Bhagani 4 Nos GP Gorkhuwala 3 Nos GP Dobri Salwala, 3 Nos GP Khodri Majri in Tehsil Paonta Sahib Disrict Sirmour HP

Amount

Supply, erection, testing & commissioning of submersible pumping set of reputed make such as KSB/BS/Johnston/Worthington/SABAR/OSWAL conforming to latest relevent BIS code. The pump should be fitted with free flow impellers of bronze /suitable alloy as per BIS 5659 or latest with up to date ammendments suitable for raw/clear water having greased packed bearings & shell with wound stator on motor side & with shaft protection sleeve on pump side ensuring better life for shaft conforming to BIS specifications. The pump shall be directly coupled to a submersible squirrel cage electric induction motor of Kirloskar/NGEF/Jyoti / Crompton make conforming to relevent BIS code with up to date ammendments totally dust & water proof for submersible duty isolated from the pump by intermediate casing with double mechanical seal in oil chamber chamber & grease packed lubricated bearings & provided with stainless steel thrust bearing plate to withstand non vertical loads with minimum wear & tear. It should also be fitted with a device to take up expansion of water with the heating of motor. The pump set should include water level guard, errection clamps, cable clips & depth gauge etc. & suitable for operation on data given below:-

T/well Gojjer Adrein.

T/well Khodri Majri.

T/well Khoron wala. Ist.

T/well Khoron wala.-2nd

Providing & fixing of Auto control panel with Push Button Star delta Starter (4 Nos) for submersible Pumps set of L&T and reputed make fabircated with M.S.Sheet and angle iron stand duly painted and complete with internal wiring comprising of main switch of suitable Amp. T.P Volt Meter, Ammpmeter, Hours Run Meter ,Phase Indicating lamps with GSM based, remove start/stop operation call/SMS for feedback regarding running of pumps & Breakdown message ,timer scheduling for fixed hours in a day ,inbuilt protection against /undervoltage ,Dry run, single phase preventor ,in built GPS tracker ,phase reversal configurable volt/ current limits with a facility to access the system through minimum 10 Nos authenticated Mobile Nos complete in all respect, including entire carriage of materials upto all leads,lifts installation and testing at site with entire satisfaction of Engineer-in-charge.(all metres to be installed shall be digital.)

Supply & fixing of Kirloskar /Kilburn /IVC /Fouress /Gled /BHEL/ Leader/Pelicon make of suitable size cast steel double flanged Swiwng Check type Reflux valve having size one size larger than the nominal dia of delivery of the pump or equal to dia of column pipe (in case of t/well) and capable of withstanding nominal seat pressure as mentioned in item No.1-(a) in all tubewells + surge purpose conforming to BIS/API standards with up to date ammendments for delivery line of pump of dia . Class PN 1.6

Supply & fixing of Kirloskar /Kilburn /IVC /Fouress /Gled /BHEL/ Leader/Pelicon/KSB make of suitable size cast steel double flanged sluice valve having size one size larger than the nominal dia of delivery of the pump or equal to dia of column pipe (in case of t/well) and capable of withstanding nominal seat pressure as mentioned in item No.1-(a) surge pressure in all tubewells conforming to BIS/API standards with up to date ammendments for delivery line of pump of dia Class Cast steel PN 1.6

P/L suitable size copper PVC insulated armoured power three & half core cable conforming to BIS 1554 (Part I) -1988 or latest with up to date ammendments of Siemen/Gloster/ICC/EICO/National /IEC make from meter of HPSEB to circuite breaker & from circuite breaker to bus bar switch & starter (one cable carrying all three phases) including all other electrical equipment/accessories such as thimbles,flexible pipe,solder,nuts & bolts,cable glands etc. laid in pipes or trenches under floor The type,size & make will be subject to approval of HPSEB authorities. In case of non acceptance by HPSEB authorities it shall have to be replaced by the tenderer free of cost.

P/L PVC jointless flat water proof cable as per BIS 694-1990 (latest with up to date ammendments) suitable for the pump sets offered from circuite breaker to motor & motor to starter including all other electrical equipments such as thimbles, flexible pipes, solder,nuts & bolts,cable glands etc. laid in pipes or trenches. The type,size & make will be subject to approval of HPSEB authorities.In case of non acceptance by HPSEB authorities it shall have to be replaced by the tenderer free of cost Gojjer Adrein 50 Mtr. Khodri Majri 40 Mtrs. Khoronwala Ist. & 2nd 110 Mtr. each

P/L double loop earthing with copper plate 600x600x3mm thick electrode complete with material such as charcoal, common salt ,GI pipes,thimbles,nuts & bolts,digging of pits,GI wiring & 25x5mm copper strips of required capacity conforming to BIS 3043-1987 latest with up to date ammendments suitable for above motors & other electrical equipments.

Supply & errection of floor/wall mounted power factor shunt capacitor conforming to BIS 2834-1986 or latest with upto date ammendments of BHEL/GEC/Machneil/ Mager/Bajaj/L&T make to raise the prevailing power factor at site to 0.95 for direct connection to induction motor individually,of required KVAR according to HP of motor offered including cable Siemens/Gloster/ICC make from busbar chamber to capacitor & also including L&T//Kilburn/Standard/Siemen/Havells make ICTP switches conforming to BIS 4064-1978 or latest with HRC fuses (Range to be specified by the tenderer).

RISING MAIN

Excavation in drains and channels etc. in earth work for pipes upto all depths in all classification of earth work such as pick work jumper work saturated soil including bailing or pumping out water , blasting soft/hard rock or chiseling soft /hard rock where blasting is prohibited in all lifts including jungle clearance whereever required trimming & dressing of sides levelling of beds to correct graded including shoring/struting ,planking timbering & dewatering whereever required stacking the useable/unuseable material /soil separately & after laying jointing & testing of pipes returning the useable soil in trenches in 15 cm. layers including consolidating of such deposited layer by ramming & watering & then disposing of all surplus excavated soil/unuseable material as directed within all leads,lifts including restoration of unmetalled surfaces to its original condition & including cost of diversion for traffic ,night signals ,fixing caution boards crossing over trenches for success to houses ,fencing etc. complete in all respects within all leads,lifts as per direction of Engineer-in-charge.

Providing welding and fixing M.S. Plate Flanges of 150mm dia (nominal bore) of following Flange Tables to IS 6392-1971 or latest with upto date ammendments to GI Pipes after every 90 metres or as per siterequirement including cutting of pipes wherever required , welding in three layers (Leak proof) confirming to specifications as prescribed in relevent IS code i.e. IS 816-1969 or latest as applicable with upto date ammendments with nuts, bolts & washers & specials etc. confirming to IS-1963 of latest with upto date ammendments including packing sheet i.e. asbestos fibre sheet minimum 3mm thick and painting with anticorosive paints complete in all respect in all leads lifts and carriage of material at site and as directed by Engineer-in-charge. M.S.Flanges 150mm dia (H) FT-17.

Tubewell Gojjer Adrein.

I ) 150mm dia. F.T. 5

ii) 125mm dia (M) Table-5.

Tubewell Khodri Majri

i) 150mm dia Table-5

ii) 125mm dia Table-5.

Tubewell Khoronwala-Ist.

i) 125mm dia. Table-5.

ii) 100mm dia (Column pipe.) Flange Table-5

Tubewell Khoronwala-2nd.

i) 150mm dia. Table-5.

ii) 125mm dia (Column pipe.) Flange Table-5

Laying , jointing & commissioning at site in trenches bevelled ended G.I. pipes of various grades confirming to BIS 1239 (Part-1)- 1990 or latest with upto date ammendments, capable of withstanding required test pressure as prescribed in BIS code in randum lengths of 5.5 to 6.5 mtr. . The pipe's ends shall bevelled suitable for butt welding, including cost of jointing with butt welding confirming to IS 816-1969 or latest as applicable (leak proof) in three layers at site of work with welding rods of standard make & all allied accessories whatever required for welding at site, tail pieces ,tees, bends manufactured from parent pipes etc. and cutting of pipes wherever required as per site requirement including carriage in all leads lifts and as directed by Engineer-in-charge (Earth work shall be measured & paid seperately)

Tubewell Gojjer Adrein. 150mm dia .

ii) Column pipe 125mm dia.

ii) Tubewell Khodri Majri.

i )150mm dia

ii) Column Pipe125mm dia

Tubewell Khoronwala-Ist.

i) 125mm dia.

ii) Column Pipe 100 mm dia

Tubewell Khoronwala-2nd.

ii) 150 mm dia.

ii) 125mm dia . Column pipe.

Dharmender Chandel

RAKESH KUMAR

Himalaya Enterprises

KUSHDEEP SINGH

GIAN CHAND

M/s Sharma Electrical