Fisheries - Neyyar fish seed farm - Providing Lighting and aerator supply to Ornamental fish hub 6

Amount

Fabricating, supplying, conveying, lifting and erecting tubular post of overall height 11.70 m using 150mm and 125mm of Heavy duty G.I. Pipe sections having ISI mark and of approved quality(TATA , ZENITH , APOLLO) as per the drawing erected on a RCC footing, using 1:2:4 CC with nominal reinforcement and 6 Nos. of PCC well steining having 0.9m dia and 0.30m height with a muffing of 0.6mx0.6mx1.0m and 8 numbers of 20mm dia 2.80m long MS foundation bolts having 150mm long standard thread on both ends and 3Nos 20mm and 2Nos 20mm nuts at the top and bottom for each bolt . The post is to be provided with a 20mm thick MS flange of OD 300mm with 8 nos of 20mm bolt holes and a base plate of 450mm square 10mm thick with 8 Nos 20mm dia bolt holes embedded in the concrete 1.8m below ground level. The post should have a 1500mm dia ring made out of 50mm heavy GI pipe with cross supports using 40mm heavy GI pipe at the top for mounting the luminaries and its control gears. A 10mm thick MS flange having OD 300mm at 1200mm below the first ring mounted to the post . The top of the pipe should be sealed with 125mm table F Dummy flange. 12mm dia wire rope is to be provided for the entire length of the post as mechanical support for the cables to the luminaries. Inverted Y arrangement using 50mm heavy GI pipe and flanges at the top and 75mm 4kgf/cm2 PVC pipe with bend to be provided in the concrete muffing for taking out cables. 8 x 75mm stainless steel Bolt & Nut shall be used for fixing all the flange covers.The post is to be painted with two coats of Industrial Epoxy paint and subsequent two coats of UV resistant polyeruthene paint of approved quality and colour over two coats of best quality Industrial Epoxy primer.All steel items shall be dip galvanised.

Fabricating, supplying, conveying, lifting and erecting DOUBLE ARM tubular post of overall height of 7m using 6m 80mm and 3.0 m 50mm Heavy G.I. Pipe with suitable mounting for fixing led fitting having ISI mark and of approved quality as per the drawing, erected on a RCC 1:2:4 foundation in 1 No of well steining of 0.3m depth , 0.9m dia and 2 Nos well steining of 0.3m depth and 0.6m dia. with muffing of 0.45x0.45m with height 1.0 m. The post shall be erected on 4 numbers of 20 mm dia GI foundation bolts of length 2.0 m having 100mm long standard thread with a 20 mm thick GI flange suitable for 80mm C class pipe at the bottom of the post and 80 D flange on the muffing with 4 nos of 20mm bolt holes and 3Nos of 20mm nuts per bolt. The bottom of the post shall be provided with suitable size stiffner pieces.The post is to be painted with two coats of best quality industrial epoxy paint over two coats of industrial epoxy primer . Muffing to be plastered using cement mortar 1:4, 12mm thick colour washing 2 coats using approved colour etc. complete.All GI pipe sections to be used for the fabrication of the post shall be of TATA/ZENITH/APOLLO make.All steel items shall be dip galvanised.

Conveyance, installation, testing and commissioning of departmentally supplied flood light luminaire with lamp on the existing tubular post of height upto 15m from ground level.

Conveyance, installation, testing and commissioning of departmentally supplied flood light/ area light luminaire with lamp to a height upto 8m from ground level.

Fabricating and supplying special clamping arrangement for fixing an asymmetrical beam Integral LED flood light on pipe with clamps each made out of 50 x 6mm MS flat and 8x40mm SS nuts and bolts for one luminaire. The clamps are to be linked with 40x6mm MS flat with suitable holes 8mm ,10mm or 12mm size with suitable size SS Bolt& Nut to fix the luminaire. All the items are to be painted with two coats of epoxy based industrial primer of approved quality and two coats of best quaity synthetic enamel paint of approved colour as per drawing.

Supply and fixing Cable Junction Boxes IP 65 for outdoor applications (Thermoplastic Polycarbonate ) suitable for cable sizes 2.5 sq.mm ,80 X 80X 52 mm Cape model Abox i025 or equivalent and accessories for Cable Junction Boxes such as Copper Terminal Set 2.5 sq.mm 5 Pole 1 No,Support for Terminal 1No including fixing the accessories using suitable size Stainless steel Bolt and nut, giving necessary connections, making good the damages etc. as required.

200W LED Flood light output > 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor >0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing, acrylic cover complete with THD <10%, power factor >0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)

Wiring for light point/ fan point/ exhaust fan/call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required(Group C)

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 20mm

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25mm

Supply of following sizes of ISI marked medium class PVC conduit. 20mm

Supply of following sizes of ISI marked medium class PVC conduit. 25mm

Supply of following sizes of ISI marked medium class PVC specials. 20 mm pvc bend

Supply of following sizes of ISI marked medium class PVC specials. 25 mm pvc bend

Supply of following sizes of ISI marked medium class PVC specials. 20/25 mm pvc junction box 2 way

Supply of following sizes of ISI marked medium class PVC specials. 20 mm pvc coupler

Supply of following sizes of ISI marked medium class PVC specials. 25 mm pvc coupler

Laying and fixing of one number 20/25mm medium class PVC conduit on purlin of steel roof provided for fixing ridge sheet at a height upto 6m from floor level using 25 x 15 mm aluminum strip of thickness 3.15 mm bolted on steel tube using 6 x 25mm GI Bolt and nut with washer. The clamp shall be painted with two coats of matching colour enamel paint

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 3 x 1.5 sq. mm

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 3 x 2.5 sq. mm

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 3 x 4.0 sq. mm

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 5 x 4 sq. mm

Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings).

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 15/16 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.

Supply and fixing brass batten / angle holder including connection etc as required

Supply and fixing 7/9 W LED lamp OSRAM / Philips or equivalent

Supplying 20 W LED BattenTube light fitting 1200 mm 6500K cool white light ,1800 lumen,RoHS Philips or equivalent

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required. 1 or 2 Module (75mm X 75mm)

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required. 3 Module (100mm X 75mm)

Supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 15/16 amp switch

Supply of SID or equivalent make Street light luminaire, 20W LED, IP66 optical & control gear compartment, die cast aluminium painted housing,anti UV Polycarbonate protector with in built lenses, with easily accessible control gear compartment, suitable for horizontal mounting (Ø32- 42mm), System power (including driver loss) of 20W with luminous efficacy > 105 Lumen/W at Ta 25⁰C. Lifetime residual flux @ Tq 35⁰C @ 50,000 hours = 70%, Ta = 50⁰C, in built surge protection of 4kV (in Differential and Common mode), Power Factor > 0.95, Colour Rendering Index > 70 and Cool white light (5700⁰K). Warranty: 5 year.

Supplying modular family street light luminaire KESElec City or equivalent 40W CW LED,an IP66 LEdSafe® optical compartment,a separate IP66 control gear compartment and extruded aluminium painted housing, a toughened glass protector,permanently sealed with a robotically dispensed silicone sealant,closed at one end by an end cover and the other end by a frame and door assembly (to access control gear) both made of injection moulded polycarbonate,a removable control gear plate,safety plug and socket system,high pressure die cast aluminium painted mounting spigot suitable for horizontal mounting (Ø32-42mm) with tilt flexibility of ± 10 degrees, with lensoFlex2® technology,PMMA lenses with wide photometry for increased pole spacing,System efficacy= >90 lumen/watt, Driver efficiency >= 85%, K 07 impact resistance , driver operating voltage 140 V to 277 V, lifetime residual flux @ Tq 35º @50,0000 hours =70%,Ta = 55º,surge protection of 10Kv ( in differential and common mode),Power factor ≥0.90,colour rendering index≥70 and Cool white light (5,700ºK).with five year warranty for the light fitting.

Supply and fixing cast aluminium stove enameled elliptical shaped bulk head fittings with porcelain holder and mesh guard suitable for LED Lamps including connection etc as required.

Conveyance, installation, testing and commissioning of T 5 outdoor light fitting with FL lamps/LED/ SV/ MH/ CDMT light fittings with all accessories and lamp etc. of all types directly on the existing pipe/ pole including giving connections with the existing wiring etc as required

Supply, fabrication, conveyance and fixing 40 mm dia B class GI pipe bent to shape and fixing the same to wall / parapet using clamps as noted along with each size, painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer, making good the damages, colour washing etc as required (for the installation of outdoor light fittings).

Supply of single phase , 230V ,90W,1400 rpm, 305 mm sweep heavy duty exhaust fan ( Almonard or equivalent) in metal frame Category B ,

Installation of exhaust fan upto 450 mm sweep in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.

Fabricating, supplying, erecting and commissioning of wall mounting, fully compartmentalised, dust and vermin proof cubicle Lighting panel board of size 900x2050x250mm or nearest suitable size using 16 G CRCA MS sheet, painting two coats of best quality epoxy paint over two coats of epoxy primer of approved quality, having front openable bolted type vertical bus bar chamber & cable alley covers with cable entry provisions and bolted type cable glanding plate using 14 SWG CRCA MS sheet at the top. The panel should have 75x40x6.0mm MS channel provided at the bottom as support and comprising the following(Panel drawing attached with the schedule) Incoming:- 63A, 25kA FP MCCB setted to 40 A and rotory drive kit including BUC handle - 1No Outgoing:-25A, 25kA TP MCCB setted to 20A with 16A two way neutral link and rotory drive kit including BUC handle -6Nos ; All switches and MCCB should be of panel mounting and conforming to IS:13947part III (L&T/SIEMENS/Legrand) Busbar Chamber: Busbar chamber with 25X3mm Copper strips 4 Nos or equivalent size one each for phases and neutral fitted on epoxy insulator. Switch interconnections to be done with suitably rated Copper conductors insulated with PVC heat shrinkable sleeves. Interconnections with the incoming and is also to be carried out using 25x3mm PVC insulated Copper strips supported using epoxy insulators as required. Metering and Indication:- Panel surface mounting 96 Sq.mm,LED Multi-function meter with RS 485 port with three line display to read V,A,PF & F SCHNEIDER or equivalent suitable for 415V,50Hz- 1No, 3Nos 30/5 A tape wound CTs.,22.5mm dia LED type indication lamps for three phases(R,Y &B) - 1 set and control Group B 2A SP MCB (C Curve)-3 numbers inside the cubicle. The panel board should have hinged shutters for MCCB cubicles and front openable bolted type busbar covers with quarter turn type lock and key arrangement and it should be fabricated as per Kerala State Electrical Inspectorate's norms and only after obtaining approval from the departmental officers at site for the design. Panel internal earthing should be provided using 25x3mm copper strip with two earthing points brought out at bottom side. (Panel drawing attached with the schedule)

Supply, conveyance and fixing 40 A - 50A 25 kA (Ics=100%Icu), 3 pole, MCCB having thermal setting range of 80 - 100% with thermal magnetic release having adjustable OL & SC conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required

Supply and fixing IP 65 outdoor installation CAPE 9 module( Model No Aki 09) 200x200x122mm or equivalent Thermoplastic polycarbonate MCB distribution board with PE + N Terminals on the surface using suitable size stainless steel screws.

Supplying and fixing 40A, two pole, (single phase and neutral), 240 volts,Residual current circuit breaker with Overcurrent Protection (RCBO), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing 40A, four pole, (three phase and neutral), 415 volts,Residual current circuit breaker with Overcurrent Protection (RCBO), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing four pole, 415 volts, 40A isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Providing and fixing 0.3 m , 20 mm X 3 mm copper strip on surface or in recess for connections etc. as required.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.Upto 35 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. Above 35 sq.mm and upto 95 sq.mm

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. Upto 35 sq. mm (clamped with 1mm thick saddle).

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. Above 35 sq. mm and upto 95 sq.mm (clamped with 25x3 mm Flat clamp)

Supply of 4 core 6 sq mm PVC insulated and PVC sheathed armoured aluminum cable

Supply of 4 core 4.0 sq mm PVC insulated and PVC sheathed armoured copper Power cable

Supply of 4 core 10 sq mm PVC insulated and PVC sheathed armoured aluminum cable

Supply of 4 core 16 sq mm PVC insulated and PVC sheathed armoured aluminum cable

Supply of 3.5 core 50 sq mm PVC insulated and PVC sheathed armoured aluminum cable

Supply of 3 core 2.5 sq mm PVC insulated and PVC sheathed armoured copper control cable

Supply of 3 core 2.5 sq mm PVC insulated and PVC sheathed submersible copper cable

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 4 C x 6 sq.mm

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 4 C x 10 sq.mm (25mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 4 C x 16 sq.mm (28mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3.5 C x 50 sq.mm (35mm)

Supplying and making end termination nickel plated single compression brass cable gland for 4 core 4 sq mm PVC insulated and PVC sheathed armoured copper conductor cable 1.1 KV grade, including providing earth clip and superior quality copper cable socket.

Supplying and making end termination nickel plated single compression brass cable gland for 3 core 2.5 sq mm PVC insulated and PVC sheathed armoured copper conductor cable 1.1 KV grade, including providing earth clip and superior quality copper cable socket.

Supply and providing 20mm pvc male gland at the junction box including drilling necessary holes as required

Supply of 50/38mm (OD/ID) Double Walled Corrugated (DWC) pipes made out of HDPE for mechanical protection to under ground power/communication/ OFC / Signal cable conforming to IS 14930 Part - II,

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required. 63 mm dia (OD-63 mm & ID-52 mm nominal)

Excavation for cable trenches of depth upto 1.2 m in soft soil including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 metre.

Providing and fixing10 SWG copper wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

Supplying metal shutters suitable for 305 mm sweep heavy duty exhaust fan

Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes.

Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required.

Providing and laying earth connection from earth electrode with 4.00 mm dia copper wire in 15 mm dia G.I. pipe from earth electrode including connection with copper thimble excavation and re-filling as required.

Supply and providing 25x6 mm brass bolt and nut with washers on the existing MS box / earth bus etc. as required including drilling necessary holes as required

Supply of superior quality copper earth socket for the 3.15mm (10 SWG) earth conductor including crimping etc. as required.

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. (but without charcoal/ coke and salt) as required.

Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Double pole

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Triple pole

Supply and fixing Thermoplastic polycarbonate Cable Junction Boxes IP 65 for outdoor applications ( with knock outs for cable entry )) suitable for cable sizes 16 sq.mm ,182 X 180 X 111 mm CAPE model No TKPC1818 -11m withTerminals or equivalent and accessories for Cable Junction Boxes such as Copper Terminal Set including fixing the accessories using suitable size Stainless steel Bolt and nut, giving necessary connections, making good the damages etc. as required.

Supply and installation of wall mounting cubicle type dust and vermin proof CAPE make CA63 , 540x270x170mm IP66,IK 10 Glass fibre reinforced polyester enclosure including providing 0.20m copper earthstrip of 25 x 3mm

Supply and installation of wall mounting cubicle type dust and vermin proof 600x300x214 mm, Hensel make hinged door polycarbonate KSEB meter Enclosure - IP65 outdoor enclosure with provision for fixing KSEB meter, MI WD2 Gasket 2 Nos , 2.5 sq.mm pvc insulated copper wire for meter connection etc complete.

Supply and installation of wall mounting cubicle type dust and vermin proof CAPE make or equivalent CA63a , 540x270x205mm IP66, Glass fibre reinforced polyester enclosure including supply and fixing 50A , 25kA FP MCCB, with rotary handle, 3 Nos phase indication lamp and 3 Nos 2A SP MCB including wiring using 2.5 sq.mm wire for control wiring .

Supply and installation of wall mounting cubicle type dust and vermin proof 600x300x214 mm, Hensel make polycarbonate Enclosure - IP65, hinged door Enclosure including supply and fixing 125A, 25kA,4pole MCCB with BUC rotory drive kit including giving connection. Metering and Indication:- 2A SP MCB C Curve -4 Nos and a 100A two way disconnectable type neutral link inside the cubicle. 16mm dia LED type Phase indication lamp-Red and Yellow - 2 Nos. 16mm dia LED type Phase indication lamp Blue colour - 1Nos.

Supplying and fixing surface/ recess mounting, vertical type, 415 volts,Dust and waterproof ,IP66 Hensel make or equivalent FPVN 0412 opaque door 4 way 4 + 12 VTPN distribution board of poly carbonate inclusive of tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's, with provision for MCCB as incomer, interconnection between incomer MCCB and bus bars (but without MCB's/ MCCB) as required .

Supplying and fixing surface/ recess mounting, vertical type, 415 volts,Dust and waterproof ,IP66 Hensel make or equivalent FPVN 0802 opaque door 8 way ( 8 + 24) VTPN distribution board of poly carbonate inclusive of tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's, with provision for MCCB as incomer, interconnection between incomer MCCB and bus bars (but without MCB's/ MCCB) as required .

Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required.

Supply and fixing 3 phase,415V, 1 KVAR, ISI marked Heavy Duty Power factor improvement Capacitor with test certificate in the existing enclosure

Providing and laying in position reinforced cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc including form work etc as required (excluding reinforcement).

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.

Providing 15mm thick cement plaster of mix 1:4 (1 cement : 4 fine sand) at all levels.

Providing and fixing B class G.I. pipes with ISI mark complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. 50mm dia nominal bore

Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc. as required.100 mm width X 50 mm depth X 1.6 mm thickness.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 4 X 6 sq. mm + 2 X 6 sq. mm earth wire

Supplying, fabricating , erecting and commissioning wall mounting, dust and vermin proof cubicle aerator panel board of size 1000x800x250mm or nearest suitable size using 16 G CRCA MS sheet, painting two coats of best quality synthetic enamel paint over a coat of epoxy primer, having separate hinged door and quarter turn key lock covers for incomers and outgoing and power capacitor and front openable bolted type door for wireway box with cable entry provisions , terminal block using 20 A Elmex connector for taking out the supply to the motor, bolted type cable glanding plate using 14 SWG CRCA MS sheet at the top and bottom . Incoming:- 32A, 25kA FP MCCB setted to 25 A and rotory drive kit including BUC handle- 1No. outgoing-16A, 16kA,TP MCCB, complete with rotory handle - 2 Nos. panel surface mounting 96mm square 3 line LED type Multifuntion meter with V,I and frequency measurement(vif) socomec or equivalent suitable for 230 ac 50Hz-1 Nos. 32A two way disconnectable type neutral link-3 Nos. 2A single pole MCB (C curve) - 7 Nos. 16mm dia LED type Phase indication lamp-Red and Yellow - 4 Nos. 16mm dia LED type Phase indication lamp- Green - 2 Nos. 16mm dia LED type Phase indication lamp Blue colour-1No. 30/5,5VA, metering tapewound C.T of accuracy class 1- 3Nos. Legend Plate Danger,415V ,100x75mm , MOTOR start and run - 2Nos. Busbar Chamber: Busbar chamber with 25X3mm Copper strips 4 Nos or equivalent size one each for phases and neutral fitted on epoxy insulator. Switch interconnections to be done with suitably rated Copper conductors insulated with PVC heat shrinkable sleeves. Interconnections with the incoming and is also to be carried out using 25x3mm PVC insulated Copper strips supported using epoxy insulators and outgoing with suitable rated copper conductor as required. Protection and Motor starter 415V ,9A, 3 pole contactor AC-3 duty with 1NO+1NC contactor- 2 Nos. MPR 301 BE 020 L&T make motor protection Relay - 2 Nos. 20A 415V AC ELMEX Connecter DIN Rail - 12 Nos. 25 A,415V,50Hz Push button unit ON and OFF - 2 set. All MCCBs shall be Ics= 100% Icu.The components should be wired using 4sq.mm PVC insulated copper wire and terminations for input and output will be done using 20A Elmex Connector.

Supply and providing 125A HRC fuse units with 100A HRC fuse link in the meter portion.

Supply and providing 100A 2way neutral link in the meter portion.

Engaging Labour for dismantling cable and dismounting panel at the electrical room. Wireman

Engaging Labour for dismantling cable and dismounting panel at the electrical room. Beldar

Supply and providing First Aid Chart duty framed and placed in a conspicuous location for clear vision

Supply and providing 9 litre capacity GI Fire Bucket painted in post office red with primer coat of red oxide and written with white paint "FIRE" mounted on MS angle frame work/wall bracket fillled with fine sand, painting the frame work/floor stand including making good the damages, colour washing etc.as required.

Supply and providing 6 mm thick & 1 m wide electrical grade chequered type rubber mat to withstand 3.3 KV dielectric strength conforming to IS 15652/2006

Supply and providing 6Kg stored pressure ABC Powder type Fire Extinguisher with hose and clamps including fixing it to wall as required.

Documentation charge to KSEB for meter shifting

S K Electrics and Infrastructures