GENERAL providing seating arrangement for online examination hall in KPSC office at thrissur work General Civil Work

Amount

1. APPENDIX

OD69209/2021-2022:od14867/2020_2021 :Office table with side partition including bottom draws(Two units facing each other) as per the attached drawing no.1Table: 4 ft x 2 ft x 2.5 ft (L x W x H)Under cabin: one draw + shelf (2 ft x 2.5 ft)Side partition per seat height: 1 ft x 2 ftusing 25mm thickness engineered wood with 90 GSM premium lamination for side partition and table top and 17mm thickness engineered wood with 90 GSM premium lamination for drawer carcass and shutter confirming to IS 3087 : 2005 and IS 12823 : 2015 including Drawer slider 400mm (Ebco/Equivalent), L Clamp 20mm: 24 x 2 set, Mini fix (Ebco/Equivalent), Draw handle 4? (Ebco/Equivalent), Edge band 25mm x 2mm thickness and 20mm x 0.8mm thickness (Rahau/Equivalent), Leg bush with 20mm leg bush screw, Keyboard slider (Ebco/Equivalent), Screws for L clamp fixing and slider fixing (Ebco/Equivalent), Cable organizer (Ebco/Equivalent), Draw fixing screw and Multipurpose lock including Labour charges for Edge banding in all exposed edges with through feed automatic edge band machine, Labour charges for cutting, drilling & assembling etc, all complete for the unit

OD69278/2021-2022:od14867/2020_2021 :Office table with side partition including bottom draws(Wall side single unit) as per the attached drawing no.1Table: 4 ft x 2 ft x 2.5 ft (L x W x H)Under cabin: one draw + shelf (2 ft x 2.5 ft)Side partition per seat height: 1 ft x 2 ftusing 25mm thickness engineered wood with 90 GSM premium lamination for side partition and table top and 17mm thickness engineered wood with 90 GSM premium lamination for drawer carcass and shutter confirming to IS 3087 : 2005 and IS 12823 : 2015 including Drawer slider 400mm (Ebco/Equivalent), L Clamp 20mm: 24 x 2 set, Mini fix (Ebco/Equivalent), Draw handle 4? (Ebco/Equivalent), Edge band 25mm x 2mm thickness and 20mm x 0.8mm thickness (Rahau/Equivalent), Leg bush with 20mm leg bush screw, Keyboard slider (Ebco/Equivalent), Screws for L clamp fixing and slider fixing (Ebco/Equivalent), Cable organizer (Ebco/Equivalent), Draw fixing screw and Multipurpose lock including Labour charges for Edge banding in all exposed edges with through feed automatic edge band machine, Labour charges for cutting, drilling & assembling etc, all complete for the unit

21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)

OD60226/2021-2022:od14875/2020_2021 : 17mm thickness engineered wood with 90 GSM premium lamination conforming to IS 12823 : 2015 and IS 3087 : 2005 (Reaffirmed 2010) for providing additional areas

OD60227/2021-2022:od14874/2020_2021 : 25mm thickness engineered wood with 90 GSM premium lamination conforming to IS 12823 : 2015 and IS 3087 : 2005 (Reaffirmed 2010) for providing additional areas

OD60228/2021-2022:od14873/2020_2021 :Table with side partition and keyboard sliding platform for online examination hall (wall side single unit) Table: 75cm x 45cm x 75cm (L x W x H)Side partition between 2 candidates and 2 rows: 45cm x 45cm as per the attached drawing No.7using 25mm thickness engineered wood with 90 GSM premium lamination for side partition and table top and 17mm thickness engineered wood with 90 GSM premium lamination for slider platform board both conforming to IS 12823 : 2015 and IS 3087 : 2005 (Reaffirmed 2010) including L clamp 20mm, Mini fix (Ebco/Equivalent), Edge band : 25mm x 2mm thickness & 20mm x 0.8mm thickness (Rahau/Equivalent), Leg bush with 20mm leg bush screw, Keyboard slider (Ebco/Equivalent), Screws for L clamp and Slider fixing (Ebco/Equivalent), Cable organizer (Ebco/Equivalent) & Draw fixing screws including labour charges for edge banding in all exposed edges with through feed automatic edge band machine and including all cutting, drilling & assembling charges etc, for the table unit.

Baiju v.p

Bidder Name

Baiju v.p

HASEEB JAN