Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.7 LAccepted-AOC | L1 | Accepted-AOC Award of Contract | |
| 2 | L2₹26.4 L+₹4.7 L (21.5%)Rejected-Finance | L2 | Rejected-Finance Second Lowest | |
| 3 | L3₹27.3 L+₹5.6 L (25.9%)Rejected-Finance | L3 | Rejected-Finance Third Lowest |
Tender Value
Refer Docs
EMD Value
₹60,000
Closing Date
28 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Major Sameer Wadekar
Holta Cantt Palampur
CERTAIN REPAIRS TO OTM AND MD ACCN OF ZONE A AND B AT PALAMPUR MIL STN
2022_MES_534875_1
GEP-10/2022-23
Open Tender
Civil Works
Item Rate
180 days
Palampur Mil Stn
As per tender documents
8 documents required · 8 mandatory
₹500
Yes
GE Palampur
₹60,000
Yes
16 Aug 2022
30 Jun 2022
30 Jul 2022
30 Jun 2022
28 Jul 2022
14 Jul 2022
Amount
Taking down chowkats or frames with shutters (without taking off shutters from the frames) n. exc. 1.5 sq.m each complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 square metre and not exceeding 4.0 square metre each complete all as specified and directed.
Taking down door shutters of any description exc 1 Sqm but n.exc 2 Sqm each complete all as specified and directed.
Taking down cement plaster of any description on brick or stone or cement concrete block walls etc including raking out joints, hacking for key, scrubbing down with water etc, and removal of rubbish off the premises and leave the work clear of any plastering complete etc all as specified and directed.
Demolition of brickwork or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facing, dressed stone work precast concrete articles complete all as specified and directed.
Demolition of cement concrete unreinforced in ground floors, kota stone, granite flooring, tiles flooring and paving’s not exceeding 15cm thickness (below or above ground level) and removal unserviceable materials, debris and rubbish to a distance not exceeding 100m complete all as specified & directed.
Dismantling wall and ceiling boards (fibre,pulp, insulation,etc) or insulation boards,any thickness, including cover fillets, complete all as specified and directed.
Dismantling timber scantlings 40 sqcm and over in section in any position framed or unframed work etc, complete all as specified and directed.
Dismantling timber scantlings like fillets, rails, posts, rafters, purlins, etc under 40Sq.cm in section, in any position complete all as specified and directed. `
M&L brick work with sub class 'B' bricks straight or curved on plan, exceeding 6 m mean radius with old size bricks, built in cement mortar 1:6 complete all as specified and directed.
M&L plain cement concrete M-10, nominal mix, type C-1, using 20mm graded mechanically crushed stone aggregate, 50mm thick as in plinth protection etc., surface finished even and smooth without using extra cement and laid to a slope of 1 in 24 in alternate panels n.exc. 1.20 Sqm each, 12mm wide and 5 cms deep joints shall be formed between the bays and shall be filled with mastic filling comprising a mixture of one part of heated blown bitumen VG-10 and two parts of heated coarse sand (by volume), all as specified & directed. Note:- The unit rate include for use of form work (straight or curved).
Demolition of floor, hearth or wall tiling including cement mortar screed bed or backing coat complete all as specified and directed.
S&F solid PVC wall lining consisting of 5mm thick wood grain ( as approved by GE) printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and directed.
S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame complete all as specified and directed.
M&L 25mm thick plain cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregates) as in sub base of floor/path surfaces/roof padding etc finished even & rough to receive floor finishes, complete all as specified and directed.
M&L Non-skid, coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.06 sqm but not exc 0.11 sqm as in floors etc laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:4, set and jointed in neat cement slurry and pointed with white or coloured cement to match the colour of tiles complete all as specified and directed.
M&L Non-skid, coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.18 sqm but not exc 0.38 sqm as in floors etc laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointed with white or coloured cement to match the colour of tiles complete all as specified and directed.
M&L Non-skid, coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.18 sqm but not exc 0.38 sqm cut to size as required as in skirting/dado over and including 10mm thick backing coat in cement mortar 1:4, set and jointed in neat cement slurry and pointed with white or coloured cement to match the colour of tiles complete all as specified and directed.
M&L vitrified ceramic tiles 10mm thick (square / rectangular) light shade polished, area of each tiles not exceeding 0.36 sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 15mm thick screed bed or bedding layer in CM 1:4 complete all as specified.
M&L vitrified ceramic tiles 10mm thick (square/rectangular) light shade polished, area of each tiles not exceeding 0.36 sqm as in skirting/dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile over and including 10mm thick backing coat in CM 1:4 complete all as specified.
M&L glazed ceramic coloured tiles of size 350X250X7mm/450x350x7mm/450x300x7mm/ 600 x 300 x 7mm thick as in vertical surfaces set and jointed in neat cement slurry, pointed in white or coloured cement to match the colour of tiles, over and including 10mm thick backing coat in CM 1:4 to receive tiles, complete all as specified and directed.
S&F pressed steel frames of size 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc and providing one shop coat of primer,complete all as specified and directed.
S&F pressed steel frames of size 165mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc and providing one shop coat of primer,complete all as specified and directed.
S&F 35mm thick factory made 2nd class hard wood plain framed, panelled shutter (one or two) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS:1003 (part 1) kiln seasoned and chemically pressure treated complete all as specified and directed.
S&F 35mm thick factory made 2nd class hard wood glazed and skeleton shutter open rebated prepared to receive glass gauge etc without sash bars for securing glass , gauge etc size of members of shutters as specified in SSR Part- I section 8 clause 8.24(a) all as specified and directed.
S&F box type steel windows comprised of tubular frame and shutters made out of 1.25 mm thick MS tube factory made with double side shutters wire gauged shutters & glass glazed shutter(wire and glass panes shall be measured and paid separately) with side hung shutters with steel handles and steel peg stay doytailed at welded incl 2 Nos tower bolts 150 mm long for each leaf and 10 mm square bar grills at spacing as shown on drg welded to FI frame work,incl other fittings,hinges,handles tarred hold fast PCC blocks etc. all as shown on drg No CEPZ/TD-354/09 sheet 1/3 to 3/3 ,complete all as specified. Note:- cost of grill included in this item.
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, supplying and fixing in opening as per specifications & directed.
S&F factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strips of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement all as specifed and directed.
S&F 100mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.
S&F 150mm size (length of bolt) aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed
S&F 150 mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.
S&F 300 mm size (length of bolt) aluminium alloy, anodised, sliding door bolt with hasp and staple ,(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.
S&F 300mm long mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.
S&F in repairs well seasoned 2nd class hard wood small fitting such as cleats, brackets of any type,latch and hinge blocks,shaped door and windew stops and the like including all necessary labours articles n.exc 200 Cu.cm each including 50 mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and directed
S&F rolled mild steel bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks(stays), heavy, for large gates, hook and pintle hinges;large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans;plain angle cleats for securing purlines to wooder trusses conform to Fe-290 Gde E-165 complete all as specified & directed.
M&L plain cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate cast in situ in lintels up to 1.5 m clear span, cills steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones (fixing hold fasts), bed plates, water through and the like including weathering, slightly rounded or chamfered angles and throating including use of form work (straight or curved) complete all as specified & directed.
S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
M&L for rendering 15mm thick plaster on brick masonry/ stone masonry or other than fair faces of brick wall in cement mortar 1:6 mixed with water proofong compound as per manufacturer's instructions finished even and fair without using extra cement, complete all as specified and directed.
M&L rendering 15mm thick plaster on brick masonry/ stone masonry or other than fair faces of brick wall in cement mortar 1:4 finished even and fair without using extra cement, complete all as specified and directed. Note: WPC compound may be used as per required ground condition which is to be measured and paid seperately.
M&L preparation of new plastered or un-plastered surfaces of walls and applying two coats of oil bound distemper over a coat primer complete all as specified & directed.
M&L preparation of new plastered surfaces of walls and applying two coats of white wash complete all as specified and directed.
M&L preparation of new plastered or un-plastered surfaces of walls and applying two coats of cement base paint over a coat primer complete all as specified & directed.
Dismantling boarding, any description, fixed in any position with nails complete as specified and directed.
S&F 18/19mm thick prelaminated particle board/ MDF board exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete as directed.
M&L 6mm thick external teak wood lipping to block board or veneered particle board 18/19mm thick fixed with nails complete as specified and directed.
S&F 75mm size hasp and staple safety type aluminium anodized with mild steel hinge pin including bolt to hinge plate and fixed with screws all as directed.
S&F mild steel continuous piano hinges, bright finish or electro galvanised, width of flap when open 40mm, complete all as specified and directed.
S&F 40mm dia cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified & directed.
Dismantling and taking down water tank exc 250 ltrs but n.exc 500ltrs capacity & removing to store or credited to contractor complete all as specified and directed .
S&F 500 ltr rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed.
S&F in repairs vitreous china squatting pan water closet, orissa pattern, size 580 x 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including cast iron 'P' or 'S' trap, provn of lime concrete and jointing to flush pipe, complete all as specified and directed.
S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including Seat and cover for pedestal pan complete all as specified and directed.
S&F in repairs CP jet spray hygenic spray jet for 15mm bore dia fittings 1 to 1.5m long tube acrylic type complete all as specified and directed/
S&F in repairs 10 litre capacity PVC, low level, valveless, syphonic action type flushing cistern, inlet ball valve, float valve, handle and fixing arrangement, 32 mm dia PVC flushing pipe and 15mm dia, 450mm long PVC connection with CP brass coupling nuts and PVC washer at both ends, complete all as specified and directed.
S&F in repairs viterous china, white, flat back wash hand basin of size 550mm x 400mm including brass CP waste coupling 32 mm dia with long screwed shank and fly nuts, PVC, medium grade 32 mm dia waste pipe, chain and plug, porcelain stopper , PVC connection 15 mm dia, 450 mm long with brass CP nuts and washers at both ends complete all as specified and directed.
S&F in repairs vitreous china bowl urinal flat back, size of 465 x 355 x 265mm white (minimum), with grating and union for discharging pipe (excluding flushing cistern, flush pipe and waste pipe)
S&Fin repairs 32mm bore low density polyethylene (LDPE) pipes of pressure rating 6 Kgf/sq.cm for low level cistern and waste pipe for sink, washbasin complete all as specified and directed.
S&F pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for 15 mm bore iron pipe complete all as specified & directed.
S&F in repairs pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for 15 mm bore iron pipe complete all as specified & directed.
S&F fancy type, chromium plated, bib tap, cast copper alloy with crutch or butterfly handle, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule complete all as specified & directed.
S&F in repairs, fancy type, chromium plated, bib tap, cast copper alloy with crutch or butterfly handle, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule complete all as specified & directed.
S&F stop valve/angle valve, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with quater turn flange, screwed both ends for 15mm bore iron pipe or for union complete all as specified & directed.
S&F in repairs stop valve/angle valve, cast copper alloy, fancy type,chromium plated, screwed down, high pressure, with quater turn flange, screwed both ends for 15mm bore iron pipe or for union complete all as specified & directed.
S&F in repairs PVC connection 15mm size, 450mm long with PTMT nuts complete all as specified and directed.
S&F in repairs ball brass valves, high pressure, with polythene float and fly nut complete, screwed for 20 mm bore iron pipe or brass ferrule complete all as specified & directed.
S&F in repairs 32/40mm bore waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified & directed.
Dismantling of 100 / 110 mm bore cast iron /PVC(SWR) or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, taking out from walls incl fittings, if required complete all as specified and directed.
Dismantling of 75mm bore cast iron/PVC(SWR) or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, taking out from walls including fittings, if required complete all as specified and directed.
S&F PVC (SWR) pipe 110mm bore single socketed, in any length with rubber ring joints, fixed to walls including fixing clamps etc complete all as specified and directed
S&F PVC (SWR) pipe 110mm bore single socketed, in any length with rubber ring joints, as in floors, trenches complete all as specified and directed
S&F PVC SWR pipe 75mm bore single socketed, in any length with rubber ring joints, fixed to walls including fixing clamps etc complete all as specified and directed
S&F PVC (SWR) pipe 75mm bore single socketed, in any length with rubber ring joints, as in floors, trenches complete all as specified and directed
S&F PVC (SWR) junction (Single T) equal or unequal 110mm bore with access door complete all as specified and directed
S&F PVC (SWR) junction (Single T) equal or unequal 75mm bore with access door complete all as specified and directed
S&F PVC (SWR) floor trap plain with grating including jointing with solvent 75mm bore complete all as specified and directed.
S&F PVC (SWR) floor trap plain with grating including jointing with solvent 75 mm bore complete all as specified and directed.
S&F PVC (SWR) bends of any radius 75mm bore dia complete all as specified and directed.
S&F PVC (SWR) bends of any radius 110mm bore dia complete all as specified and directed.
S&F in repairs soap dish,vitreous china white approximate size 160mm x 160mm x 90mm fixed to plugs with chromium plated brass screws complete all as specified and directed.
S&F in repairs towel rail 450mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 170gms) complete all as specified & directed.
Taking up or down 15mm bore steel tubing and connection, including cleaning for refixing or removal to store, complete all as specified and directed.
Taking up or down 20mm bore steel tubing and connection, including cleaning for refixing or removal to store, complete all as specified and directed.
S&F steel water tubing, 15mm bore, galvanised, "medium grade" ISI marked with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor including cutting chases for concealed work if required etc, complete all as specified and directed.
Fixing only steel water tubing, 15mm bore, galvanised, "medium grade" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor including cutting chases for concealed work if required etc, complete all as specified and directed. Note: The GI tubing obtained from taking down used in this item.
S&F steel water tubing, 20mm bore, galvanised, "medium grade" ISI marked with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor including cutting chases for concealed work if required etc, complete all as specified and directed.
Fixing only steel water tubing, 20mm bore, galvanised, "medium grade" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor including cutting chases for concealed work if required etc, complete all as specified and directed. Note: The GI tubing obtained from taking down used in this item.
Dismantling of old rested plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering etc. complete all as specified and as directed.
S&F 0.63mm Galvanised,corrugated mild steel sheeting with two corrugations side lap,fixed with L-type or J-type or cranked hook bolts and washers in roofs,walls etc. with grade of zinc coating 275 complete all as specified and directed.
Fixing only 0.63mm Galvanised,corrugated mild steel sheeting with two corrugations side lap,fixed with L-type or J-type or cranked hook bolts and washers in roofs,walls etc. with grade of zinc coating 275 complete all as specified and directed. Note: The sheets obtained from dismantling used in this item.
S&F 0.63mm in thickness plain, galvanised, mild steel sheeting, in ridges, hips valley gutters, drip and straight flashings ( length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed.
Fixing only 0.63mm in thickness plain, galvanised, mild steel sheeting, in ridges, hips valley gutters, drip and straight flashings ( length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed. Note: The sheets obtained from dismantling used in this item.
M&L preparation of new zinc (or galvanised) surfaces to receive painting by coating with mordant solution including washing and cleaning etc. complete all as specified and directed.
M&L preparation of new steel surfaces of any description not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide,zinc chrome primer complete all as specified and directed.
M&L second class soft-wood clean sawn as in vertical post, scantling for ceiling or roof truss member etc complete all as specified & directed.
M&L second class soft-wood plain fillets square, rectangular or triangular in section, clean sawn area exc.13 sq.cm but not exc. 25 sq.cm secured with nails or brads complete all as specified & directed.
M&L second class soft-wood plain fillets square or rectangular in sections bull-nosed splayed, rounded on one edge or face area exc 6 sq.cm but not exc. 13 sq.cm secured with nails or brads complete all as specified & directed.
M&L 4mm thick asbestos cement plain building boards, fixed to timber framework with screws as in ceiling flat or sloping complete as specified and directed.
S&F anodised aluminium snap grid frame work 605mm x 605mm for false ceiling including hangers 6mm dia GI(upto1200mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of G.I. flat iron of size 40mm X 3 mm, 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.
M&L for 6mm thick E-board (classic) false ceiling of size 600x600 mm fixed to aluminium snap grid false ceiling complete all as specified and as directed.
M&L preparation of new wooden surfaces of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed.
S&F powder coated anodised aluminium frame/chowkhat for doors, windows, ventilators with minimum thickness of powder coating 50 micron with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.
S&F 5.50 mm thick sheet glass ordinary quality, exceeding 0.50 square metre in each pane fixed with rubber gasket and aluminium powder coated snap beading etc. complete all as specified and directed.
S&F powder coated anodised aluminium door shutters ( power coating of any colour and thickness not less than 50 micron) aluminium section weighting 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprane packing two number of alumium handle 150mm long for each shutter, one aluminium door stopper, hinges type B-21,100mm long,anodised aluminium snap beading,screws,anodised aluminium fittings complete all as specified and directed.
S&F powder coated anodised aluminium window and ventilator shutters ( power coating of any colour and thickness not less than 50 micron) side hung type without sash bars, aluminium section weighting 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprane packing one number of alumium handle of suitable size for each shutter, one peg stays 150mm long, 02 numbers hinges type B-21,100mm long,anodised aluminium snap beading, screws, anodised aluminium fittings complete all as specified and directed.
S&F 4.00 mm thick sheet glass ordinary quality,not exceeding 0.50 square metre in each pane fixed with rubber gasket and aluminium powder coated snap beading etc. complete all as specified and directed.
S&F in repairs brass 4 Levers mortice lock, vertical type of size 100mm, complete all as specified and directed.
S&F brass 4 Levers mortice lock, vertical type of size 100mm, complete all as specified and directed.
M&L double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, complete all as specified and directed.
M&L in repairs double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, complete all as specified and directed.
S&F aluminium (extruded section body) door closer hydraulically regulated, designation No. 3 universal type suitable for door shutter of 851 to 1000mm in width and of weight between 61 to 80 Kg complete all as specified and directed.
S&F in repairs aluminium (extruded section body) door closer hydraulically regulated, designation No. 3 universal type suitable for door shutter of 851 to 1000mm in width and of weight between 61 to 80 Kg complete all as specified and directed.
M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted built in CM 1:6 complete all as specified and directed.
M&L rolled sections (like beams, channels, angles, flats or other type of sections) Fe-410- W(Gde- E-250) quality- B as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc. complete all as specified and directed.
S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&F pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&F in repairs 25mm dia aluminium anodised curtain rod including brackets, stops, rollers etc complete all as specified and directed.
S&F in repairs stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed.
M&L complete removal of roof treatment including APP membrane,PCC padding,plastering,brick bat etc coplete, complete all as specified and directed.
M&L preparing the surface of roof slab by brushing with wire brashes for removal of loose materials etc and sweeping with brooms, gunny bags and finally remove dust by compressed air by compressor complete, complete all as specified and directed.
M&L applying neat cement slurry with 3Kg of cement slurry per sq.m mixed with liquid water proofing compound on surfaces of roof and platering 10 mm thick in cement mortar 1:3 mixed with liquid water proofing compound as per manufacturer's instructions and finishing the surface even and smooth without using extra cement, complete all as specified and directed. Note: WPC shall be measured and paid separately.
M&L one coat of cold bituminous primer to the plastered surface @ 0.40 litres per sqm conforming IS-3384 and laid a layer of APP polymeric membrane 3mm thick (minimum) weighing 3.0 kg per sqm reinforced with polyster non woven fabric (weight not lass than 150gm/sqm) by toarch application method complete all as per manufacturer instructions and sealing all the over lap shall be minimum 75mm in length side and 100mm on with side. complete all as specified and as directed.
M&L APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt. not less than 150gms/sqm) land on primed surface by forced application complete all as specified.
Dismantling wrought iron or mild steel work of any description not other wise provided for complete all as specified and directed.
Supply only liquid water proofing compound complete all as specified and directed.
M&L preperation of old/ untreated walls (washing, rubbing down and stopping of distempered and painted surfaces) and finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm over and including 1mm thick plaster of paris putty for prepare the surface even and smooth over plastered surface toprepare the surface even and smooth complete all as specified and directed. Note:- Shade as spproved be GE/ Engr in Charge.
M/S THAKUR ENTERPRISES
BHARDWAJ BUILDERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .