Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.3 LAccepted-AOC PREM SAROVAR HOTEL NAINITAL 263 001 UTTARAKHAND | NAINITAL | UTTARAKHAND | 263001 | L1 | Accepted-AOC Being lowest tenderer | |
| 2 | L2₹14.2 L+₹55,302.50 (4.07%)Rejected-Finance | L2 | Rejected-Finance Not being lowest tenderer |
Tender Value
₹15 L
EMD Value
₹30,000
Closing Date
14 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE RANIKHET
GE (MES) RANIKHET
REPAIR MAINT OF OTM MD ACCN AT NAINITAL UNDER GE RANIKHET
2023_MES_594426_1
GE/RKT/22 OF 2023-24
Open Tender
Civil Works
Item Rate
330 days
Nainital under GE Ranikhet
Class E, Cat a (i)
7 documents required · 7 mandatory
₹500
GE RANIKHET
₹30,000
4 Aug 2023
10 May 2023
22 Jun 2023
10 May 2023
14 Jun 2023
25 May 2023
Amount
BOQ ( Sch 'A') B/R items Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed.
All as per item No 01 above but of any description and in any position not otherwise specifically provided for complete all as specified and directed
Demolition of brick work or stone masonry or precast PCC block walling built in cement mortar complete all as specified and directed.
Material & Labour for brick work with sub class `B’ bricks, straight on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.
Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for including reinforcement cut as required to facilitate demolition complete all as specified and directed
M&L for RCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in slab supported on walls,beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed
M & L for use and waste of form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exc 200mm thick in fair finished surface of concrete complete all as specified and directed.
M&L mild steel TMT bars 10mm dia and over cut to length bent to shape required, including cranking, bending spirally for hooping for columns hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed
M&L for 16 to 18mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete over cement screed bed 15mm thick 1:4, complete all as specified and directed
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and directed.
Material & Labour for coloured non skid ceramic tiles 7 to 8 mm thick ( square/ rectangular) area of each tiles exc. 0.11 sqm but n.exc. 0.18 sqm coloured joint free tiles as in floors etc set and jointed in neat cement slurry and pointed in white cement with colour pigment over with and including 15mm thick bedding layer in CM 1:6 complete all as specified and directed.
Material & Labour for coloured non skid ceramic tiles 7 to 8 mm thick ( square/ rectangular) area of each tiles exc. 0.18 sqm but n.exc. 0.36 sqm coloured joint free tiles as in floors etc set and jointed in neat cement slurry and pointed in white cement with colour pigment over with and including 15mm thick bedding layer in CM 1:6 complete all as specified and directed.
All as per item No 13 above but in skirting/dado or verticle surfaces with back coat of screed bed or bedding layer of 10 mm thick 1:4 and pointed in white or coloured cement to match complete all as specified and directed.
Material & Labour for 300x450x7mm thick glazed ceramic tiles coloured, design and pattern as approved fixed as in vertical surface such as skirting,dado and riser to steps etc, set and jointed in neat cement slurry and pointed with white cement with colour pigment to match over with and including 10mm thick rendering in CM 1:4 complete all as specified and directed.
M&L Vitrified tiles 8 to 10mm thick light shade (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over with and including screed bed of 15mm thick 1:6 complete all as specified and directed.
M&L Vitrified tiles 8 to 10mm thick light shade (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, on verticle surface as in dado, skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with over and including screed bed of 10mm thick 1:4 on vertical surfaces complete all as specified and directed.
M&L for cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades shelves, lintels etc, and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10cm girth.
Taking up or down steel tubing and connections 15mm dia bore including cleaning for refixing or removal to store complete all as specified and as directed.
All as per Item No. 19 above but of 20mm dia bore complete all as specified and as directed.
All as per Item No. 19 above but of 25mm dia bore complete all as specified and as directed.
S&F GI water tubing of 15mm dia ,medium grade conforming to IS-1239(Part -I) with and including all GI fittings such as bends, tees, short pieces, connectors, elbows, reducers, union dockets etc & fixed to walls,ceilings & laid in floors complete all as specified and directed.
All as per Item No. 22 above but of 20mm dia bore complete all as specified and directed.
All as per Item No. 22 above but of 25mm dia bore complete all as specified and directed.
S&F in repair 15mm dia bib taps cast copper alloy chromium plated with crutch or butterfly handle screwed down ,screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed
S&F in repair 15mm dia chromium plated bib taps, fancy type long body cast copper alloy with crutch or butterfly handle screwed down ,screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed
Supply & Fixing in repairs fancy type pillar taps 15 mm bore, Brass chromium plated , screwed down high pressure with or without letter HOT or COLD with long screwed shanks and fly nut complete all as specified and directed
S&F in repairs 15mm bore Brass CP basin mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed.
S&F in repair Brass CP Wall mixer for mixing hot & cold water (3 in 1) screwed down for iron pipe and fixed bore of pipe 15mm complete all as specified and as directed.
S&F in repairs 15mm Stop valves, cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type), screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
S&F in repair Angle Cock,15mm bore fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.
S&F in repair 50mm dia CP waste fittings, brass chromium plated for glazed ware sinks, basins, etc, with long screwed shanks and fly nuts, flange end bedded in red lead cement complete all as specified & directed.
Supply & fixing PVC waste pipe 32mm dia of cup with over all length of pipe 90cm complete all as specified and directed.
Supply & fixing PVC waste pipe 40/50 mm dia of cup and over all length of pipe 90cm complete all as specified and directed.
S&F in repair Brass chromium plated shower rose 125mm size with shower arm, including fixing to steel pipe or union complete all as specified and directed.
S&F Soap Dish CP stainless steel complete all as specified & directed.
S&F toilet paper holder with flat recessed type stainless steel complete all as specified and directed
S&F Peg Set of 6 with base plate stainless steel complete all as specified and directed
S&F Corner Glass Shelf 300mm (with ABS Brackets) 300 x 300mm complete all as specified & directed.
S&F brass chromium plated tubular towel rail, 20 mm dia, D; type, 60 cm long between flanges complete all as specified and directed.
S&F in repair vitreous China squatting pan, Orissa pattern incl CI trap, size 580 x 440 mm white, with integral foot rests squat pattern closet also includes setting the trap and pan in lime concrete (1 lime, 2 sand or surkhi and 5 aggretate), min. 150mm thick all round and finished just below level of rim of pan to receive the floor finishing (thickness as indicated) and making good floor complete all as specified incl cutting to the flush pipe and necessary repair to the floor complete all as specified and directed.
S&F Vitreous China wash downwater closet pan (pedestal pattern), white (including fixing bolts & flush pipe, plastic water closet seat,black, closed pattern with bottom, and cover and mild steel chromium plated or aluminised hinging device etc.) complete all as specified and directed
S&F one piece floor mounted vitreous china EWC with integrated flushing cistern, soft closing seat cover and necessary nut/bolt for fixing complete all as specified and as directed
S&F in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified complete all as specified and directed.
S&F PVC Flushing Cistern 10 litre capacity, Low Level Valve Less, Symphonic Action type, White, with Inlet, Ball Valve, Float and Handle including 32mm dia PVC Flush Pipe, a Pair of MS Brackets,CP flush bend including Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 of any description, complete all as specified and directed.
Supply & Fixing vitreous china wash basin, white, flat back, size 550mm x 400mm, including brackets, PVC waste pipe 32mm dia, waste coupling brass, chromium plated and including cutting for and pinning in ends of brackets or erecting stand, fixed in repairs complete all as specified and directed.
S&F wash hand basin of vitreous china counter sunk size 560mm x 410mm x 180mm, PVC waste pipe 32mm dia, waste coupling brass chromium plated and including cutting and making good in cement mortar complete all as specified and directed.
S&F stainless steel sink 1mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar on dwarf wall or including fixing brackets and connecting union to pipe, overall size 495mmx420mm bowl size 410mmx330mmx160mm complete all as specified and directed
S & F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.
S&F stainless steel plate rack of size 24 x 30 x 10 inch of best quality including necessary stain less steel screws, rawl plugs and washers complete all as specified and directed.
S&F in repair 15 mm Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms) complete all as specified and directed.
S & F in repair Stainless Steel grating 100mm dia complete all as specified.
S & F in repair Stainless Steel grating 125mm dia complete all as specified.
S&F in repair PVC Connections 15mm size with PTMT Nuts of length 450mm and fixed, complete all as specified and as directed.
S&F in repair PVC Connections 15mm size with PTMT Nuts of length 600mm and fixed, complete all as specified and as directed.
Dismantling of CI/PVC pipe 100mm dia jointed in cement mortar and taking out of trench if required complete all as specified.
Dismantling of CI/PVC pipe 75mm dia jointed in cement mortar and taking out of trench if required complete all as specified.
S&F in repair 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed including necessary fittings like socket, bend, elbow, single/double tee etc in any length with rubber ring joints fixed with clamps of flat iron and including bolts and nuts and securing ends of stays to wall or roof and making good with cement mortor 1:3 or with PCC 1:2:4 complete all as specified and directed.
All as per item ser No 58 above but laid in trenches or in floors complete all as specified and directed.
Supply & fixing in repair 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed including necessary fittings like socket, bend, elbow, single/double tee etc in any length with rubber ring joints fixed with clamps of flat iron and including bolts and nuts and securing ends of stays to wall or roof and making good with cement mortor 1:3 or with PCC 1:2:4 including finishing to match with existing surface complete all as specified and directed.
All as per item ser No 60 above but laid in trenches or in floors complete all as specified and directed.
Supply & Fixing Cabinet Mirror of size 400 x 500 made out of 2mm thick acrylic sheet with internal shelves and openable shutters complete all as specified and directed. Make:-Prayag or equivalent as approved by GE.
Taking down chowkats or frames n.exc 1.50 sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.
Taking down chowkats or frames exc 1.50 sqm but n.exc 4.00sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.
Taking down shutters of any description exc 1 sqm but not exc 2Sqm each complete all as specified and directed.
S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC Sheet rainforced with MS square tube complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame work made out of MS tubes for top or bottom rail MS frame shall be covered with heat moulded plain colour PVC channel having a PVC sheets for strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail, and bottom rail on either site and as gap insert for top rain and bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to stiles and rail with suitable PVC sheets beading and jointed together with solvent cement supplying and fixing in the frame at site as specified in cluase No 8B.2.1of SSR Part-II 2020 complete all as specified and directed.
S&F powder coated Anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed
S&F powder coated Anodised aluminium door shutters, aluminium section weighing 0.55kg/m including necessary jointing cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified and directed
S&F powder coated aluminium windows and ventilator shutters,sliding or fixed type without sash bars , aluminium section weighing 0.55 kg / m including necessary jointing cleats , glazing clips ,roller, rubber packing, anodised aluminium snap beading , screws,anodised aluminium fitting such as peg stays hinges,handle,locking device, louvers, rollers etc. complete all as specified and directed. (Note:- Glass pane and mesh will be measured and paid separately )
Supply and fixing powder coated designer grill of 5.5 mm dia and aperture of 75 mm fixed with and including aluminium powder coated flat section of size 50 x 1.5 mm complete all as specified and directed.
Supply only sheet glass 4.8mm thick tinted glass and glazing in squares complete all as specified and directed.
S&F aluminium sheet powder coated of thickness not less than 5mm thick to be in sealed as panel in aluminium door including fixing complete all as specified and directed.
S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty incl making hole and fixing with cement mortar complete all as specified and directed.
S&F for door closer aluminium extruded section hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frames, glazed with putty or fixed with beads including punching or drilling out old glazing pins/spring clips complete all as specified and directed.
S&F plain sheet glass 3mm thick, ordinary quality and glazing with oil putty in squares exceeding 0.5Sqm in each pane complete all as specified and directed.
S&F figured glass pin headed type and glazing with oil putty in square n. exc 0.5 sqm in each pane 3mm thick glass complete all as specified and directed.
S&F as in repair mild steel wire cloth, 0.45 mm nominal dia of wire and average width of aperature 1.4 mm and fixed with tinned tacks or galvanised wire staple and around all beading complete all as specified and as directed
S&F 35mm thick flush shutters, solid core construction, with block board core and plywood face panesls, commercial type on bothe sides complete all as specified and as directed.
M&L for 0.9mm thick decorative laminate type 1 of surface finish, colour and patters as approved, fixed with approved adhesive as per manufacturer's insturctions, complete all as specified and directed.
S&F mild steel wire cloth, 0.45 mm nominal dia of wire and average width of aperature 1.4 mm and fixed with tinned tacks or galvanised wire staple and around all beading complete all as specified and as directed
S&F 2nd class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed
M&L for PCC 1:3:6 type C-1(using 20mm graded stone aggregate) for bed block for fixing hold fast complete all as specified and directed
M&L Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed
S&F 35mm thick 2nd class hard wood plain frame panelled shutter (any no of panels) with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers complete all as specified and directed
S&F 35 mm thick 2nd class hard wood glazed and skelton shutter open rebated and prepared to receive glass, gauge etc,(with out sash bars) edges of framing plain chamfered or rounded fitted with cut or mitred beads for securing glass etc. size of members of shutters as specified in SSR Part-I, Sec-8, clause 8.24(a) complete all as specified and as directed
S&F in repair 18mm thick veneered decorative plywood , grade - 1 (with BWR resin ) with decorative face venners on both faces fixed with screws to timber frame work, colour and pattern as approved complete complete all as specified and directed.
S&F 2nd class hardwood small fittings such as brackets of any type, latch and hinge blocks, shaped door and widnow stops and the like, including all necessary labour; articles no exc 200 cu. cm each complete all as specified and as directed
S&F Push to open Magnetic Catches for kitchen cabinet doors complete complete all as specified and directed. Make: Hettich or equivalent as approved by GE
S&F Contnuous (piano) hinges, mild steel, bright finish or electrogalvanised width of flaps ( when open) 30mm complete all as specified and directed.
M&L for welding of steel member of steel indow/ventilator,door hinges and other sections as per requirment length of each welding upto 5 cm, making the window and ventilator operational incl provn of all necessary members viz hinges, handle, locking slot etc complete all as specified and directed.
S&F in repair Stainless Steel Decorative tubular curtain rail of 25mm dia incl six nos curtain ring per running mtr and one number of brackets on each end and one no of globe on each end of the rod per opening of door / window (make and materail approved by Engineer-in-charge) complete all as specified and directed.
S&F Aluminium alloy, anodised, sliding door bolt with haps, staple (bolt type) and fixing clips with sheet, cast and extruded section and fixing bolt and sliding bolt of extuded sections or cast aluminium alloy and fixed 250 mm long complete all as specified and as directed.
S&F Aluminium alloy, anodised, sliding door bolt with haps, staple (bolt type) and fixing clips with sheet, cast and extruded section and fixing bolt and sliding bolt of extuded sections or cast aluminium alloy and fixed 300 mm long complete all as specified and as directed.
S&F 150 mm overall length floor stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed
S&F Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed
S & F aluminium handle, cast type anodized 100mm size complete all as specified and as directed
S & F aluminium handle, cast type anodized 150mm size complete all as specified and as directed
S & F as in repair hasp and staple 150mm size of aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed
S & F 150 mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and as directed.
S & F 200 mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and as directed.
Supply & fixing butt hinges medium weight cold rolled mild steel of 100mm long complete all as specified and directed.
Supply & fixing Stainless Steel butt hinges medium weight of 100mm long complete all as specified and directed.
Supply & fixing butt hinges medium weight cold rolled mild steel of 50mm long complete all as specified and directed.
Taking down cement plaster on brick or stone walls etc raking out joints hacking for key scrabbing down water etc including taking out/removal of the all the tree routes from the brick surface/concrete surface complete all as specified and directed. Note : Rate should be deemed included in the said items in the item rate.
Material and labour for 15mm thick cement plaster in CM (1:4) on fair faces of brick or concrete surfaces using WPC where ever required as per manufacturerer's instructions and finishing the surface even and smooth (without using extra cement) complete all as specified and directed. NOTE -WPC shall be measured and paid separetely.
M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even and fair without using extra cement complete all as specified and directed.
M&L for rendering 10mm thick in CM (1:3) on fair faces or concrete ceiling surfaces finished even and fair without using extra cement complete all as specified and directed.
Supply only WPC complete all as specified and directed.
M&L for one coat of synthetic enamel paint to old decorated wooden surfaces of any description, not otherwise described over exc 10 cm with or girth including preparation of surface complete all as specified and directed.
M&L for applying two coats of synthetic eneamel paint over a coat of pink primer on new wooden surfaces over 10 cm width or girth including preparation of surfaces complete all as specified and directed.
M&L preparing new plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion paint complete all as specified and as directed.
M&L preparing new plastered or unplastered surfaces of Ceiling and applying two coats of distemper oil emulsion paint complete all as specified and as directed
M&L for applying one coat of oil bound distemper to old decorated surface of wall to match the existing surface including preparation of surfaces complete all as specified and directed.
M&L Preparing newly plastered surfaces and applying two coat of cement base paint over a coat of primer complete all as specified and as directed
M&L for preparation of old decorated plastered or unplasteredsurfaces of walls including cornices etc by brooming down stell wire brushing, scraping down smoke soot, moulds, masss and efflorscent salts and trading oil and greasy spots & removing of nails mark & applying one coat of cement base paint on wall complete all as specified
M&L for providing PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in roof kerbs or mud stops rouded or chamfered on edges complete all as specifed and directed.
M&L for preparing and cleaning of RCC roof surface and applying bitumen primer @ 0.30 kg/sqm and then apply hot blown bitumen grade 85/25 @ 1.2 kg/sqm and water proofing treatment by APP modified polymeric water proofing membrance (weight not less than 3 kg/sqm) with overlap of 10 cm sealed by frame shall be laid & the overlaps sealed/fused by flame as per manufacturer instructions and finally it will be finished with a coat of aluminium paint @ 0.200 Ltr/sqm as per manufacturers instructions complete all as specified and directed.
Dismantling water tanks of capacity exc 250 but not exc 500 ltr capacity complete all as specified and directed.
S&F rotational moulded polythene water storage tanks tripple layer (cylindrical vertical with closed top) hoisted and fixed in postion 500 ltrs capacity with and including 20mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe minimum weight 210 gram complete all as specified and directed.
Dismantling water tanks of capacity exc 500 but n.exc 1000ltrs complete all as specified and directed.
S&F rotational moulded polythene water storage tanks tripple layer (cylindrical vertical with closed top) hoisted and fixed in postion 1000 ltrs capacity with and including 20mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe minimum weight 210 gram complete all as specified and directed.
M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base 75mm thick finished even and rough complete all as specified and directed.
Dismantling plain or corrugated steel sheeting, any gauge, thickness as in roof coverings.
Supply & fixing 0.63mm thick Galvanised, corrugated mild steel sheeting with two corrugation side laps, fixed with L or J type hooks or crank hook bolts and washers as in roofs, walls etc with grade of zinc coating 120gm per Sqm both sides inclusive complete all as specified and directed.
Supply & fixing 0.63mm thick Plain, galvanised, mild steel sheeting, as in roof, ridges, hips, valley gutters, drip and straight flashing with grade of zinc coating 120gm per Sqm both sides inclusive complete all as specified and directed.
Fixing only galvanised plain/corrugated steel sheeting in any thickness with two corrugations side lap, fixed with L-type or J-type or cranked hook bolt and washers in roofs, walls etc but except sheets complete all as specified and as directed. Note:- Old serviceable Sheets obtained from Srl item No 126 above shall be reused.
S & F of 0.63 mm thick plain galvanised iron steel (PGI) sheeting including cover gola of same thickness PGI sheet as in Nainital or similar pattern roof covering ( to be provided as per the existing pattern to match with same side by side) fixed with flat iron clip of size 20x3 mm complete all as specified and directed.
Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) any thickness, including cover fillets but with or without frame work complete all as specified and directed.
Supply & fixing of powder coated GI snap grid frame work for false ceiling comprising of the following sections for making partitions of 605x605 mm size fixed to walls with rawl plugs & screws and hanged to roof with and including 2mm dia GI wire suspender of suitable length and butterfly clips, size of main tee shall be 37mmx24mmx0.3 mm thick , cross tee shall be 28mmx24mmx0.3mm thick and wall angle shall be 24mmx24mmx0.3 mm thick complete all as specified and directed.
Supply & fixing 4mm thick non asbestos E-board classic cememt building board for insulation and accoustic purpose, 600 x 600 mm size fixed with staples on snap grid as in ceiling complete all as specified and directed.
KRISHNA SAI ENTERPRISES
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .