Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹105.4 Cr
EMD Value
₹1.1 Cr
Closing Date
2 Dec 2026, 6:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Project Implementation Unit, Health & Family Welfare Department
Construction of New Academic Block as per NMC norms at PDU Medical College, Rajkot, Gujarat.
364995
111/01/2026-27
Open
Civil - All
Works
Rajkot
12 documents required · 9 mandatory · 3 optional
₹30,000
PIU – General Fund AC 11-114
₹1.1 Cr
8 Nov 2026
8 Nov 2026
8 Nov 2026
2 Dec 2026
8 Nov 2026
120 days
Name of Work: Construction of New Academic Block at PDU Medical College, Rajkot, Gujarat.
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
Providing and erecting 3.00 metre high temporary barricading at site each panel of size 2.50 m x2.00 m made of 40x40x6 mm angle iron
or 50x50x3 mm hollow MS tube posts/horizontal members/bracings covered with 1.63 mm thick MS sheet. The sheet shall be fixed with
30x5 mm MS flat by suitable welding/riveting. The panels shall be made so that gap of 50cm above the ground is available making overall
height as 2.5 m. MS channel ISLC 75 @ 5.70 kg/m, 50 cm long shall be provided at the bottom having oval shaped holes of size 50x25 mm
at both ends with 50 cm long MS angle 40x40x6 mm bracing. Suitable arrangement shall be made to fix the barricading to avoid from
overturning by providing 250 mm long expansion fasteners at both ends. The work shall be executed as per drawing/direction of Engineer
in-Charge which includes writing and painting, arrangement for traffic diversion such as traffic signals during construction at site for day Rupees Two
and night, glow lamps, reflective signs, marking, flags, caution tape as directed by the Engineer-in-Charge. The barricading provided shall Thousand Nine
1 279.57 be retained in position at site continuously including shifting of barricading from one location to another location as many times as RMT 2,943.98 Hundred Forty Three
required during the execution of the entire work till its completion. Rate include its maintenance for damages, painting, all incidentals, and Ninety Eight
labour materials, equipments and works required to execute the job. The barricading shall not be removed Paise Only
without prior approval of Engineer-in-Charge.
(Note :- One time payment shall be made for providing barricading from start of work till completion of work including shifting. The
barricading provided shall remain to be the property of the contractor on completion
Demolishing & Breaking of Reinforced cement concrete of any depth and at any height/levels including supply of all tools & machinary
with taking all necessary safety precautions like scaffolding, propping, underpinning etc. ,cutting, straightening, scraping & cleaning of
reinforcement bars, cutting of reinforcement manually or by any other means staking of serviceable material, disposal of unserviceable Rupees One
material With Lead and lift. Rate shall also includes removal of existing plaster / tiling, manhole covers, trench frame & guide angles, RCC Thousand One
2 115.88 road other embedded structural items in Concrete and staking the same for use/scrap ECT. Complate As Directed By EIC (Unuseble Cum 1,163.64 Hundred Sixty Three
material to be dumped with the permission of local authority any lavies/charges to be paid by agencies and no extra payments will be and Sixty Four Paise
made and disposed at non objectinable place to be found by the Contractor) Only
(A) R.C.C. work
Clearing and grubbing road land includding uprooting trank vegetation, grass, bushes, shrubs, saplings and trees girth upto 300mm Rupees Two and
3 4,602.44 removal of stumps of tress cut earlier and disposal of unserviceable materials. Smt 2.85 Eighty Five Paise
A) By Mechanical means in area of light jungle. Only
Excavation for foundation upto 1.5 mt.depth All kind of Soil.Including Type of Loose or soft soil etc. including strutting, sorting &
Dewatering out and stacking of unuseful materials and disposing off the excavated stuff upto any lead and lift.(Excavated earth / Stuff to
4 6,400.76 be stacked and surplus earth/unuseble material to be disposed with the permission of local authority any lavies/charges to be paid by Cum 128.99
Eight and Ninety
agencies and no extra payments will be made and disposed at non objectinable place to be found by the Contractor. )
Nine Paise Only
Schedule B Page 1 of 136 SIGNATURE STAMP OF BIDDER
Excavation for foundation upto 1.5 mt.depth All kind of Soil.Including Type of Dense or Hard soil etc. including strutting, sorting &
Dewatering out and stacking of unuseful materials and disposing off the excavated stuff upto any lead and lift.(Excavated earth / Stuff to
Hundred Sixty Five
5 2,301.23 be stacked and surplus earth/unuseble material to be disposed with the permission of local authority any lavies/charges to be paid by Cum 165.21
agencies and no extra payments will be made and disposed at non objectinable place to be found by the Contractor. )
Excavation for foundation upto 1.5 mt.depth All kind of Soil. Including Type of Hard Murrum (Not Required Blasting) etc. etcincluding
strutting, sorting & Dewatering out and stacking of useful materials and disposing off the excavated stuff upto any lead and lift (Excavated
Hundred Two and
6 2,301.23 earth / Stuff to be stacked and surplus earth/unuseble material to be disposed with the permission of local authority any lavies/charges Cum 302.81
Eighty One Paise
to be paid by agencies and no extra payments will be made and disposed at non objectinable place to be found by the Contractor.)
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
Excavation for foundation for 1.5 mt. to 3.0 mt. All kind of Soil. Including All Type of Soil Hard Murram, Soft Rock & Hard Rock (Not
Required Blasting) etc. etcincluding strutting, sorting & Dewatering out and stacking of useful materials and disposing off the excavated
Hundred Sixteen and
7 7,803.33 stuff upto any lead and lift (Excavated earth / Stuff to be stacked and surplus earth/unuseble material to be disposed with the permission Cum 316.22
Twenty Two Paise
of local authority any lavies/charges to be paid by agencies and no extra payments will be made and disposed at non objectinable place
to be found by the Contractor.)
Excavation for foundation for 3.0 mt. to 5.0 mt. All kind of Soil. Including All Type of Soil Hard Murram, Soft Rock & Hard Rock (Not
Required Blasting) etc. including strutting, sorting & Dewatering out and stacking of useful materials and disposing off the excavated stuff
Hundred Forty One
8 9,866.05 upto any lead and lift.(Excavated earth / Stuff to be stacked and surplus earth/unuseble material to be disposed with the permission of Cum 341.14
and Fourteen Paise
local authority any lavies/charges to be paid by agencies and no extra payments will be made and disposed at non objectinable place to
be found by the Contractor)
Excavation for foundation for 5.0 mt. to 6.0 mt. All kind of Soil. Including All Type of Soil Hard Murram, Soft Rock & Hard Rock (Not
Required Blasting) etc. including strutting, sorting & Dewatering out and stacking of useful materials and disposing off the excavated stuff
Hundred Eighty One
9 4,602.44 upto any lead and lift.(Excavated earth / Stuff to be stacked and surplus earth/unuseble material to be disposed with the permission of Cum 381.11
and Eleven Paise
local authority any lavies/charges to be paid by agencies and no extra payments will be made and disposed at non objectinable place to
be found by the Contractor)
Excavation for foundation for 6.0 mt. to 7.0 mt. All kind of Soil. IIncluding All Type of Soil Hard Murram, Soft Rock & Hard Rock (Not
Required Blasting) etc. including strutting, sorting & Dewatering out and stacking of useful materials and disposing off the excavated
10 4,602.44 stuff upto any lead and lift.(Excavated earth / Stuff to be stacked and surplus earth/unuseble material to be disposed with the permission Cum 421.09
One and Nine Paise
of local authority any lavies/charges to be paid by agencies and no extra payments will be made and disposed at non objectinable place
to be found by the Contractor)
Excavation for foundation for 7.0 mt. to 8.0 mt. All kind of Soil. Including All Type of Soil Hard Murram, Soft Rock & Hard Rock (Not
Required Blasting) etc. including strutting, sorting & Dewatering out and stacking of useful materials and disposing off the excavated Rupees Four
11 4,602.44 stuff upto any lead and lift.(Excavated earth / Stuff to be stacked and surplus earth/unuseble material to be disposed with the permission Cum 461.07 Hundred Sixty One
of local authority any lavies/charges to be paid by agencies and no extra payments will be made and disposed at non objectinable place and Six Paise Only
to be found by the Contractor)
Excavation for foundation for 8.0 mt. to 10.0 mt. All kind of Soil. Including All Type of Soil Hard Murram, Soft Rock & Hard Rock (Not
Required Blasting) etc. including strutting, sorting & Dewatering out and stacking of useful materials and disposing off the excavated Rupees Five
12 9,204.89 stuff upto any lead and lift.(Excavated earth / Stuff to be stacked and surplus earth/unuseble material to be disposed with the permission Cum 541.02 Hundred Forty One
of local authority any lavies/charges to be paid by agencies and no extra payments will be made and disposed at non objectinable place and Two Paise Only
to be found by the Contractor)
Filling available selected / approved stacked excavated earth (excluding rock) (Earth which is stacked at any location outside the campus Rupees One
non- objectionable place shall be found by the contractor) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm. in Hundred Thirty
depth consolidating 95% of MDD each deposited layer by ramming and watering and Compaction with Mechanical equipments if possible Seven and Forty
Seven Paise Only
Schedule B Page 2 of 136 SIGNATURE STAMP OF BIDDER
Filling in plinth with Murram brought from outside including watering, ramming, Compacting with Vibro Roller (If Possible) consolidating Rupees Two
and dressing etc. complete. (and compacting the layers to give at least 95% of maximum dry density). Royalty shall be paid by contractor Hundred Ninety
and supproting document submitted to client for verification. Nine and Sixty Seven
Filling in plinth with sand under floors including watering, ramming, consolidating and dressing etc. complete.(Royalty shall be paid by Rupees Four
contractor and supproting document submitted to client for verification.) Hundred Seventy
Seven and Thirty
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
Providing and laying rubble soling, 23 cm thick, in a compact manner, foudation, road, footpath etc. using 200 to 230 mm. cut size stones,
covering and levelling the surface with a layer of murrum after filling the voids with smaller sized stones or stone chips, including
16 1,107.24 watering, ramming well and consolidating each layer, as directed. Cum 1,726.09
Hundred Twenty Six
and Nine Paise Only
Providing and injecting Chemical emulsion for pre constructional anti-termite treatment for all types of structure with / without
basement with RCC foundation/RCC wall or with load bearing walled foundation or developing areas tree pits, water body etc. The
chemical used shall be chloropyriphos(1:19) / Biflex TC / lindane or equivalent as per approved make as per latest IS code no 6313 (Part II)
. Plinth area in plan at GF shall only be measured and paid. A guarantee bond of 10 years shall be furnished. Rate shall be inclusive of
material required for Anti Termite Treatment and labour for applying. a) Bottom surface and the sides of the excavation made for
masonry foundations at the rate of 4 liters/ of surface area (wherever applicable). b) At the rate of 7.5 liter/ Sqm of surface area to the Rupees Forty Six
17 4,258.18 backfill at the depth of 500mm below the original ground level. The soil in the immediate contact with the vertical surface of RCC column Smt 46.55 and Fifty Five Paise
shall be treated. c) Top surface of the plinth filling at the rate of 5 liter/Sqm of internal plinth area etc. complete. d) Internal vertical Only
surface from original Ground level to top of the earth filled in the plinth at the rate of 7.5 liter/Sqm of surface area in contact. e) at the
rate of 7.5 liter/ Sqm to the external vertical surface below finished Ground level to the full depth of the filling complete by injecting
chemical after drilling the holes of 12 to 15mm dia, with depths of approx. 300 to 600 mm and at 150mm centre to centre and as close to
the wall as possible. f) All holes for electrical data, water supply, drainage etc. shall be treated.
Providing and filling autoclave aerated concrete block bats (broken pieces) in single or multiple layers in super structure, filling the joints
with sand mortar (Not more than 20%) 20 mm thick cement sand mortar screed in proportion 1:6 shall be laid as per drawing. Crushing
strength of aerated concrete block/ bats shall not be less than 40 KG/sqcm, minimum density in oven dry condition between 651 to 750 Rupees One
KG/CUM, thermal conductivity shall not exceed 0.3 W/m.k, fire resistant 4 hours in true line level and plumb and cleaning the surface Thousand Seven
with necessary tool tackles etc. at all floors, all heights, all levels and all places including curing, scaffolding etc complete, as per drawing / Hundred Fifty and
specification and as directed by Engineer -Incharge. For all civil, plumbing, electrical & infrastructure works. Sixty Eight Paise Only
Schedule B Page 3 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
General Note : This shall be applicable to all concrete plan as well as work.
1. Providing and laying in position Ready Mixed specified grade concrete for PCC & reinforced cement concrete work , using cement
content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in transit mixer for a
lead up to 10 kms having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete
work including pumping of R.M.C. from transit mixer to site of laying, All Concrete Work content as per grade (without fly ash as per item
description) and as per latest IS 456 for all PCC & RCC elements of all shape, all size, at all places and heights/ depths including
transporting, laying of concrete to site by any means like pumping or tower crane etc., finishing and curing etc. and including Admixtures
in recommended proportions as per IS 9103 to accelerate, retard setting of concrete as per direction of Engineer-in-charge. Rate shall be
inclusive of providing grooves, drip moulds, ghisis, pockets, cutouts etc. and labour for insert sleeves if any wherever required while
casting. Rate also to include lift charges and scaffolding for any heights / depths from FFL/GL.(unless otherwise specified)
2. All formwork should be rigid & water tight using best quality of laminated marine plywood boards minimum 18 mm thick shuttering
19 682.71 Cum 3,772.13 Hundred Seventy
(Special) for external surfaces of super structure with supporting system of MS adjustable steel props / spans / frames for any shapes,
Two and Thirteen
sizes, planes including strutting, propping, bracing, staging etc., complete to give smooth & fair finish up to 4.5 mtr. Height or specified in
BOQ item. Providing and laying in position machine mixed, machine batched plain cement concrete (PCC) & Reinforced Cement Concrete
(RCC) including all necessary dewatering, casting in panels of any size and thickness wherever necessary, to shape and depth as specified
at all locations and with all leads and lift/depth, compaction, vibration, curing, finishing top surface to the required level, transporting
and pumping wherever necessary including the cost of form work (if required) and removal of formwork etc. complete as directed by the
Engineer. for all civil, plumbing, electrical & infrastructure works.
Providing & laying Ready Mixed Controlled cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggrt. 20 mm. nominal size)
and curing etc complete for Foundation and plinth.
Providing and laying Ready Mixed cement concrete 1:3:6 (1 Cement : 3 coarse sand :6 hand broken stone aggregates 40 mm nominal size) Rupees Three
and curing complete including cost of form work in (A) Foundation and plinth. Thousand Sixty Five
Note:- Refer General Note for Concrete as per Item No. 19 and Forty One Paise
Providing and laying in position M-350 grade concrete for reinforced cement concrete work, using cement concrete work using cement
content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in transit mixer for
any lead having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work
including pumping of batching plant from transit mixer to site of laying, cost of water tight Centering , shuttering by using 18 mm thick
water proof ply with Exposed work in centring, shuttering & Providing formwork of steel cup lock system including centring shuttering
strutting and propping etc. propping and centering below supporting floor to ceiling and removal of the same for in situ reinforced
concrete and plain concrete work in flat surfaces such as soffits of suspended floors slabs Landings walls, Fins and beams, column and Rupees Four
the like, floors etc & sides and soffits of beams, Haunching cantilevers Girders, using grouting if required, admixture in recommended Thousand Nine
proposition as per IS:9103 to accelerated, retard, setting of concrete, improve workability as per direction of engineer in charge and Hundred Fifty Five
approved , rates includes all levels/Height/Depth of work, excluding reinforcement. and Six Paise Only
(No extra will be paid in variation of cement level, minimum cement level will be as per IS 456) for reinforced concrete work in:
Note:- Refer General Note for Concrete as per Item No.
Schedule B Page 4 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
Providing and laying in position M-350 grade concrete for reinforced cement concrete work, using cement concrete work using cement
content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in transit mixer for
any lead having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work
including pumping of batching plant from transit mixer to site of laying, cost of water tight Centering , shuttering by using 18 mm thick
water proof ply with Exposed work in centring, shuttering & Providing formwork of steel cup lock system including centring shuttering
strutting and propping etc. propping and centering below supporting floor to ceiling and removal of the same for in situ reinforced
concrete and plain concrete work in flat surfaces such as soffits of suspended floors slabs Landings walls, Fins and beams, column and
the like, floors etc & sides and soffits of beams, Haunching cantilevers Girders, using grouting if required, admixture in recommended
22 328.08 Cum 7,602.27 Hundred Two and
proposition as per IS:9103 to accelerated, retard, setting of concrete, improve workability as per direction of engineer in charge and
Twenty Seven Paise
approved , rates includes all levels/Height/Depth of work, excluding reinforcement.
(No extra will be paid in variation of cement level, minimum cement level will be as per IS 456) for reinforced concrete work in:
(B) Plinth Beam / Ground Beam / Tie Beam
Note:- Refer General Note for Concrete as per Item No.
Providing and laying in position M-350 grade concrete for reinforced cement concrete work, using cement concrete work using cement
content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in transit mixer for
any lead having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work
including pumping of batching plant from transit mixer to site of laying, cost of water tight Centering , shuttering by using 18 mm thick
water proof ply with Exposed work in centring, shuttering & Providing formwork of steel cup lock system including centring shuttering
strutting and propping etc. propping and centering below supporting floor to ceiling and removal of the same for in situ reinforced
concrete and plain concrete work in flat surfaces such as soffits of suspended floors slabs Landings walls, Fins and beams, column and Rupees Six
the like, floors etc & sides and soffits of beams, Haunching cantilevers Girders, using grouting if required, admixture in recommended Thousand One
23 595.65 proposition as per IS:9103 to accelerated, retard, setting of concrete, improve workability as per direction of engineer in charge and Cum 6,183.22 Hundred Eighty
approved , rates includes all levels/Height/Depth of work, excluding reinforcement. Three and Twenty
(No extra will be paid in variation of cement level, minimum cement level will be as per IS 456) for reinforced concrete work in: Two Paise Only
(i) Up to Plinth Lvl. (Basement 1 & 2)
Note:- Refer General Note for Concrete as per Item No.
Schedule B Page 5 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
Providing and laying in position M-300 grade concrete for reinforced cement concrete work, using cement concrete work using cement
content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in transit mixer for
any lead having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work
including pumping of batching plant from transit mixer to site of laying, cost of water tight Centering , shuttering by using 18 mm thick
water proof ply with Exposed work in centring, shuttering & Providing formwork of steel cup lock system including centring shuttering
strutting and propping etc. propping and centering below supporting floor to ceiling and removal of the same for in situ reinforced
concrete and plain concrete work in flat surfaces such as soffits of suspended floors slabs Landings walls, Fins and beams, column and Rupees Six
the like, floors etc & sides and soffits of beams, Haunching cantilevers Girders, using grouting if required, admixture in recommended Thousand One
24 2,448.27 proposition as per IS:9103 to accelerated, retard, setting of concrete, improve workability as per direction of engineer in charge and Cum 6,197.36 Hundred Ninety
approved , rates includes all levels/Height/Depth of work, excluding reinforcement. Seven and Thirty Six
(No extra will be paid in variation of cement level, minimum cement level will be as per IS 456) for reinforced concrete work in: Paise Only
(i) Any Floor & Any Height.
Note:- Refer General Note for Concrete as per Item No.
Providing and laying in position M-350 grade concrete for reinforced cement concrete work, using cement concrete work using cement
content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in transit mixer for
any lead having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work
including pumping of batching plant from transit mixer to site of laying, cost of water tight Centering , shuttering by using 18 mm thick
water proof ply with Exposed work in centring, shuttering & Providing formwork of steel cup lock system including centring shuttering
strutting and propping etc. propping and centering below supporting floor to ceiling and removal of the same for in situ reinforced
concrete and plain concrete work in flat surfaces such as soffits of suspended floors slabs Landings walls, Fins and beams, column and Rupees Seven
the like, floors etc & sides and soffits of beams, Haunching cantilevers Girders, using grouting if required, admixture in recommended Thousand Four
25 1,172.05 proposition as per IS:9103 to accelerated, retard, setting of concrete, improve workability as per direction of engineer in charge and Cum 7,469.96 Hundred Sixty Nine
approved , rates includes all levels/Height/Depth of work, excluding reinforcement. and Ninety Six Paise
(No extra will be paid in variation of cement level, minimum cement level will be as per IS 456) for reinforced concrete work in: Only
(D) RCC Wall / Shear Wall
i) Basement-1 to 2 & Up to Plinth
Note:- Refer General Note for Concrete as per Item No.
Schedule B Page 6 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
Providing and laying in position M-300 grade concrete for reinforced cement concrete work, using cement concrete work using cement
content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in transit mixer for
any lead having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work
including pumping of batching plant from transit mixer to site of laying, cost of water tight Centering , shuttering by using 18 mm thick
water proof ply with Exposed work in centring, shuttering & Providing formwork of steel cup lock system including centring shuttering
strutting and propping etc. propping and centering below supporting floor to ceiling and removal of the same for in situ reinforced
concrete and plain concrete work in flat surfaces such as soffits of suspended floors slabs Landings walls, Fins and beams, column and
the like, floors etc & sides and soffits of beams, Haunching cantilevers Girders, using grouting if required, admixture in recommended
26 464.38 Cum 9,019.30 Thousand Nineteen
proposition as per IS:9103 to accelerated, retard, setting of concrete, improve workability as per direction of engineer in charge and
and Thirty Paise Only
approved , rates includes all levels/Height/Depth of work, excluding reinforcement.
(No extra will be paid in variation of cement level, minimum cement level will be as per IS 456) for reinforced concrete work in:
(D) RCC Wall / Shear Wallup to Any Floor & Any Height.
Note:- Refer General Note for Concrete as per Item No.
Providing and laying in position M-350 grade concrete for reinforced cement concrete work, using cement concrete work using cement
content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in transit mixer for
any lead having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work
including pumping of batching plant from transit mixer to site of laying, cost of water tight Centering , shuttering by using 18 mm thick
water proof ply with Exposed work in centring, shuttering & Providing formwork of steel cup lock system including centring shuttering
strutting and propping etc. propping and centering below supporting floor to ceiling and removal of the same for in situ reinforced
concrete and plain concrete work in flat surfaces such as soffits of suspended floors slabs Landings walls, Fins and beams, column and
the like, floors etc & sides and soffits of beams, Haunching cantilevers Girders, using grouting if required, admixture in recommended
27 961.25 proposition as per IS:9103 to accelerated, retard, setting of concrete, improve workability as per direction of engineer in charge and Cum 6,303.41
Hundred Three and
approved , rates includes all levels/Height/Depth of work, excluding reinforcement.
Forty One Paise Only
(No extra will be paid in variation of cement level, minimum cement level will be as per IS 456) for reinforced concrete work in:
(C) RCC Floor Beam
i) For Any Floor & Any Height.
Note:- Refer General Note for Concrete as per Item No.
Schedule B Page 7 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
Providing and laying in position M-300 grade concrete for reinforced cement concrete work, using cement concrete work using cement
content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in transit mixer for
any lead having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work
including pumping of batching plant from transit mixer to site of laying, cost of water tight Centering , shuttering by using 18 mm thick
water proof ply with Exposed work in centring, shuttering & Providing formwork of steel cup lock system including centring shuttering
strutting and propping etc. propping and centering below supporting floor to ceiling and removal of the same for in situ reinforced
concrete and plain concrete work in flat surfaces such as soffits of suspended floors slabs Landings walls, Fins and beams, column and Rupees Six
the like, floors etc & sides and soffits of beams, Haunching cantilevers Girders, using grouting if required, admixture in recommended Thousand Four
28 3,538.44 proposition as per IS:9103 to accelerated, retard, setting of concrete, improve workability as per direction of engineer in charge and Cum 6,422.59 Hundred Twenty
approved , rates includes all levels/Height/Depth of work, excluding reinforcement. Two and Fifty Nine
(No extra will be paid in variation of cement level, minimum cement level will be as per IS 456) for reinforced concrete work in: Paise Only
(C) RCC Floor Beam
i) Any Floor & Any Height
Note:- Refer General Note for Concrete as per Item No.
Providing and laying in position M-250 grade concrete for reinforced cement concrete work, using cement concrete work using cement
content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in transit mixer for
any lead having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work
including pumping of batching plant from transit mixer to site of laying, cost of water tight Centering , shuttering by using 18 mm thick
water proof ply with Exposed work in centring, shuttering & Providing formwork of steel cup lock system including centring shuttering
strutting and propping etc. propping and centering below supporting floor to ceiling and removal of the same for in situ reinforced
concrete and plain concrete work in flat surfaces such as soffits of suspended floors slabs Landings walls, Fins and beams, column and
the like, floors etc & sides and soffits of beams, Haunching cantilevers Girders, using grouting if required, admixture in recommended
29 593.92 Cum 6,714.48 Hundred Fourteen
proposition as per IS:9103 to accelerated, retard, setting of concrete, improve workability as per direction of engineer in charge and
and Forty Eight Paise
approved , rates includes all levels/Height/Depth of work, excluding reinforcement.
(No extra will be paid in variation of cement level, minimum cement level will be as per IS 456) for reinforced concrete work in:
(C) RCC Lintel, sill and Mullians Bands
i) Any Floor & Any Height.
Note:- Refer General Note for Concrete as per Item No.
Schedule B Page 8 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
Providing and laying in position M-250 grade concrete for reinforced cement concrete work, using cement concrete work using cement
content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in transit mixer for
any lead having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work
including pumping of batching plant from transit mixer to site of laying, cost of water tight Centering , shuttering by using 18 mm thick
water proof ply with Exposed work in centring, shuttering & Providing formwork of steel cup lock system including centring shuttering
strutting and propping etc. propping and centering below supporting floor to ceiling and removal of the same for in situ reinforced
concrete and plain concrete work in flat surfaces such as soffits of suspended floors slabs Landings walls, Fins and beams, column and Rupees Six
the like, floors etc & sides and soffits of beams, Haunching cantilevers Girders, using grouting if required, admixture in recommended Thousand Three
30 196.39 proposition as per IS:9103 to accelerated, retard, setting of concrete, improve workability as per direction of engineer in charge and Cum 6,318.56 Hundred Eighteen
approved , rates includes all levels/Height/Depth of work, excluding reinforcement. and Fifty Six Paise
(No extra will be paid in variation of cement level, minimum cement level will be as per IS 456) for reinforced concrete work in: Only
(C) RCC Weathershed
i) Any Floor & Any Height.
Note:- Refer General Note for Concrete as per Item No.
Providing and laying in position M-250 grade concrete for reinforced cement concrete work, using cement concrete work using cement
content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in transit mixer for
any lead having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work
including pumping of batching plant from transit mixer to site of laying, cost of water tight Centering , shuttering by using 18 mm thick
water proof ply with Exposed work in centring, shuttering & Providing formwork of steel cup lock system including centring shuttering
strutting and propping etc. propping and centering below supporting floor to ceiling and removal of the same for in situ reinforced
concrete and plain concrete work in flat surfaces such as soffits of suspended floors slabs Landings walls, Fins and beams, column and
the like, floors etc & sides and soffits of beams, Haunching cantilevers Girders, using grouting if required, admixture in recommended
31 570.89 Cum 5,791.34 Hundred Ninety One
proposition as per IS:9103 to accelerated, retard, setting of concrete, improve workability as per direction of engineer in charge and
and Thirty Four Paise
approved , rates includes all levels/Height/Depth of work, excluding reinforcement.
(No extra will be paid in variation of cement level, minimum cement level will be as per IS 456) for reinforced concrete work in:
Note:- Refer General Note for Concrete as per Item No.
Schedule B Page 9 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
Providing and laying in position M-350 grade concrete for reinforced cement concrete work, using cement concrete work using cement
content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in transit mixer for
any lead having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work
including pumping of batching plant from transit mixer to site of laying, cost of water tight Centering , shuttering by using 18 mm thick
water proof ply with Exposed work in centring, shuttering & Providing formwork of steel cup lock system including centring shuttering
strutting and propping etc. propping and centering below supporting floor to ceiling and removal of the same for in situ reinforced
concrete and plain concrete work in flat surfaces such as soffits of suspended floors slabs, incline slab, Landings walls, Fins and beams,
column and the like, floors etc & sides and soffits of beams, Haunching cantilevers Girders, using grouting if required, admixture in
32 1,063.76 Cum 7,019.50 Thousand Nineteen
recommended proposition as per IS:9103 to accelerated, retard, setting of concrete, improve workability as per direction of engineer in
and Fifty Paise Only
charge and approved , rates includes all levels/Height/Depth of work, excluding reinforcement.
(No extra will be paid in variation of cement level, minimum cement level will be as per IS 456) for reinforced concrete work in:
i) Any Floor & Any Height.
Note:- Refer General Note for Concrete as per Item No.
Providing and laying in position M-300 grade concrete for reinforced cement concrete work, using cement concrete work using cement
content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in transit mixer for
any lead having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work
including pumping of batching plant from transit mixer to site of laying, cost of water tight Centering , shuttering by using 18 mm thick
water proof ply with Exposed work in centring, shuttering & Providing formwork of steel cup lock system including centring shuttering
strutting and propping etc. propping and centering below supporting floor to ceiling and removal of the same for in situ reinforced
concrete and plain concrete work in flat surfaces such as soffits of suspended floors slabs, incline slab, Landings walls, Fins and beams, Rupees Seven
column and the like, floors etc & sides and soffits of beams, Haunching cantilevers Girders, using grouting if required, admixture in Thousand One
33 4,226.73 recommended proposition as per IS:9103 to accelerated, retard, setting of concrete, improve workability as per direction of engineer in Cum 7,139.69 Hundred Thirty Nine
charge and approved , rates includes all levels/Height/Depth of work, excluding reinforcement. and Sixty Nine Paise
(No extra will be paid in variation of cement level, minimum cement level will be as per IS 456) for reinforced concrete work in: Only
i)Any Floor & Any Height.
Note:- Refer General Note for Concrete as per Item No.
Schedule B Page 10 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
Providing and laying in position M-350 grade concrete for reinforced cement concrete work, using cement concrete work using cement
content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in transit mixer for
any lead having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work
including pumping of batching plant from transit mixer to site of laying, cost of water tight Centering , shuttering by using 18 mm thick
water proof ply with Exposed work in centring, shuttering & Providing formwork of steel cup lock system including centring shuttering
strutting and propping etc. propping and centering below supporting floor to ceiling and removal of the same for in situ reinforced
concrete and plain concrete work in flat surfaces such as soffits of suspended floors slabs Landings walls, Fins and beams, column and Rupees Six
the like, floors etc & sides and soffits of beams, Haunching cantilevers Girders, using grouting if required, admixture in recommended Thousand Three
34 29.83 proposition as per IS:9103 to accelerated, retard, setting of concrete, improve workability as per direction of engineer in charge and Cum 6,353.91 Hundred Fifty Three
approved , rates includes all levels/Height/Depth of work, excluding reinforcement. and Ninety One
(No extra will be paid in variation of cement level, minimum cement level will be as per IS 456) for reinforced concrete work in: Paise Only
(C) RCC Stair Case
i) Any Floor & Any Height.
Note:- Refer General Note for Concrete as per Item No.
Providing and laying in position M-300 grade concrete for reinforced cement concrete work, using cement concrete work using cement
content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in transit mixer for
any lead having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work
including pumping of batching plant from transit mixer to site of laying, cost of water tight Centering , shuttering by using 18 mm thick
water proof ply with Exposed work in centring, shuttering & Providing formwork of steel cup lock system including centring shuttering
strutting and propping etc. propping and centering below supporting floor to ceiling and removal of the same for in situ reinforced
concrete and plain concrete work in flat surfaces such as soffits of suspended floors slabs Landings walls, Fins and beams, column and Rupees Six
the like, floors etc & sides and soffits of beams, Haunching cantilevers Girders, using grouting if required, admixture in recommended Thousand Five
35 137.79 proposition as per IS:9103 to accelerated, retard, setting of concrete, improve workability as per direction of engineer in charge and Cum 6,537.73 Hundred Thirty
approved , rates includes all levels/Height/Depth of work, excluding reinforcement. Seven and Seventy
(No extra will be paid in variation of cement level, minimum cement level will be as per IS 456) for reinforced concrete work in: Three Paise Only
(C) RCC Stair Case
i) Any Floor & Any Height.
Note:- Refer General Note for Concrete as per Item No.
Schedule B Page 11 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
Providing and laying in position M-300 grade concrete for reinforced cement concrete work, using cement concrete work using cement
content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in transit mixer for
any lead having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work
including pumping of batching plant from transit mixer to site of laying, cost of water tight Centering , shuttering by using 18 mm thick
water proof ply with Exposed work in centring, shuttering & Providing formwork of steel cup lock system including centring shuttering
strutting and propping etc. propping and centering below supporting floor to ceiling and removal of the same for in situ reinforced
concrete and plain concrete work in flat surfaces such as soffits of suspended floors slabs Landings walls, Fins and beams, column and Rupees Five
the like, floors etc & sides and soffits of beams, Haunching cantilevers Girders, using grouting if required, admixture in recommended Thousand Twenty
proposition as per IS:9103 to accelerated, retard, setting of concrete, improve workability as per direction of engineer in charge and Two and Seventy
approved , rates includes all levels/Height/Depth of work, excluding reinforcement. Three Paise Only
(No extra will be paid in variation of cement level, minimum cement level will be as per IS 456) for reinforced concrete work in:
Note:- Refer General Note for Concrete as per Item No.
Providing and laying in position M-300 grade concrete for reinforced cement concrete work, using cement concrete work using cement
content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in transit mixer for
any lead having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work
including pumping of batching plant from transit mixer to site of laying, cost of water tight Centering , shuttering by using 18 mm thick
water proof ply with Exposed work in centring, shuttering & Providing formwork of steel cup lock system including centring shuttering
strutting and propping etc. propping and centering below supporting floor to ceiling and removal of the same for in situ reinforced
concrete and plain concrete work in flat surfaces such as soffits of suspended floors slabs Landings walls, Fins and beams, column and
the like, floors etc & sides and soffits of beams, Haunching cantilevers Girders, using grouting if required, admixture in recommended
37 76.42 Cum 6,546.82 Hundred Forty Six
proposition as per IS:9103 to accelerated, retard, setting of concrete, improve workability as per direction of engineer in charge and
and Eighty Two Paise
approved , rates includes all levels/Height/Depth of work, excluding reinforcement.
(No extra will be paid in variation of cement level, minimum cement level will be as per IS 456) for reinforced concrete work in:
(A) Plinth Beam / Ground Beam / Tie Beam
Note:- Refer General Note for Concrete as per Item No.
Schedule B Page 12 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
Providing and laying in position M-300 grade concrete for reinforced cement concrete work, using cement concrete work using cement
content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in transit mixer for
any lead having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work
including pumping of batching plant from transit mixer to site of laying, cost of water tight Centering , shuttering by using 18 mm thick
water proof ply with Exposed work in centring, shuttering & Providing formwork of steel cup lock system including centring shuttering
strutting and propping etc. propping and centering below supporting floor to ceiling and removal of the same for in situ reinforced
concrete and plain concrete work in flat surfaces such as soffits of suspended floors slabs Landings walls, Fins and beams, column and
the like, floors etc & sides and soffits of beams, Haunching cantilevers Girders, using grouting if required, admixture in recommended
38 99.18 Cum 6,197.36 Hundred Ninety
proposition as per IS:9103 to accelerated, retard, setting of concrete, improve workability as per direction of engineer in charge and
Seven and Thirty Six
approved , rates includes all levels/Height/Depth of work, excluding reinforcement.
(No extra will be paid in variation of cement level, minimum cement level will be as per IS 456) for reinforced concrete work in:
(A) Column up Any Height & Any Floor
Note:- Refer General Note for Concrete as per Item No.
Providing and laying in position M-300 grade concrete for reinforced cement concrete work, using cement concrete work using cement
content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in transit mixer for
any lead having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work
including pumping of batching plant from transit mixer to site of laying, cost of water tight Centering , shuttering by using 18 mm thick
water proof ply with Exposed work in centring, shuttering & Providing formwork of steel cup lock system including centring shuttering
strutting and propping etc. propping and centering below supporting floor to ceiling and removal of the same for in situ reinforced
concrete and plain concrete work in flat surfaces such as soffits of suspended floors slabs Landings walls, Fins and beams, column and Rupees Eight
the like, floors etc & sides and soffits of beams, Haunching cantilevers Girders, using grouting if required, admixture in recommended Thousand Eight
39 149.11 proposition as per IS:9103 to accelerated, retard, setting of concrete, improve workability as per direction of engineer in charge and Cum 8,837.52 Hundred Thirty
approved , rates includes all levels/Height/Depth of work, excluding reinforcement. Seven and Fifty Two
(No extra will be paid in variation of cement level, minimum cement level will be as per IS 456) for reinforced concrete work in: Paise Only
(A) RCC Wall / Shear Wall
i) Up to Plinth Lvl, Ground & Second Floor
Note:- Refer General Note for Concrete as per Item No.
Schedule B Page 13 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
Providing and laying in position M-300 grade concrete for reinforced cement concrete work, using cement concrete work using cement
content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in transit mixer for
any lead having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work
including pumping of batching plant from transit mixer to site of laying, cost of water tight Centering , shuttering by using 18 mm thick
water proof ply with Exposed work in centring, shuttering & Providing formwork of steel cup lock system including centring shuttering
strutting and propping etc. propping and centering below supporting floor to ceiling and removal of the same for in situ reinforced
concrete and plain concrete work in flat surfaces such as soffits of suspended floors slabs Landings walls, Fins and beams, column and Rupees Six
the like, floors etc & sides and soffits of beams, Haunching cantilevers Girders, using grouting if required, admixture in recommended Thousand Two
40 67.68 proposition as per IS:9103 to accelerated, retard, setting of concrete, improve workability as per direction of engineer in charge and Cum 6,236.75 Hundred Thirty Six
approved , rates includes all levels/Height/Depth of work, excluding reinforcement. and Seventy Five
(No extra will be paid in variation of cement level, minimum cement level will be as per IS 456) for reinforced concrete work in: Paise Only
(A) RCC Floor Beam
i) Up to Plinth Lvl, Ground & Second Floor
Note:- Refer General Note for Concrete as per Item No.
Providing and laying in position M-300 grade concrete for reinforced cement concrete work, using cement concrete work using cement
content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in transit mixer for
any lead having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work
including pumping of batching plant from transit mixer to site of laying, cost of water tight Centering , shuttering by using 18 mm thick
water proof ply with Exposed work in centring, shuttering & Providing formwork of steel cup lock system including centring shuttering
strutting and propping etc. propping and centering below supporting floor to ceiling and removal of the same for in situ reinforced
concrete and plain concrete work in flat surfaces such as soffits of suspended floors slabs Landings walls, Fins and beams, column and
the like, floors etc & sides and soffits of beams, Haunching cantilevers Girders, using grouting if required, admixture in recommended
41 103.92 Cum 6,974.48 Hundred Seventy
proposition as per IS:9103 to accelerated, retard, setting of concrete, improve workability as per direction of engineer in charge and
Four and Forty Eight
approved , rates includes all levels/Height/Depth of work, excluding reinforcement.
(No extra will be paid in variation of cement level, minimum cement level will be as per IS 456) for reinforced concrete work in:
i) Up to Plinth Lvl, Ground & Second Floor
Note:- Refer General Note for Concrete as per Item No.
Cleaning of exposed RCC surface having stains developed due to weathering affects and algae by scrapping the RCC surface, grinding,
buffing and washing it by chemical to make it free of algae and bringing the surface to its natural form by application of mixture of marble
42 579.12 Sq.Mt. 303.45 Hundred Three and
powder, white cement & grey cement coating of Dr Fixit powercrete, carbon pholaside all complete at all elevations and as per direction
Forty Five Paise Only
of Engineer-in-Charge
Providing and laying TMT Bar FE 500D reinforcement for R.C.C. work and straightening, cutting, bending, binding & placing in position Rupees Seventy
43 31,79,416.97 completed upto any floor any level as per I.S. Standard. complete.as directed by EIC. Kg 77.29 Seven and Twenty
Nine Paise Only
Providing and erecting False Staging with MS props or MS H-frames for each additional height of propping and centering where the height
of propping and centering exceeds 4.5 meter between supporting floor to ceiling supporting as required with adequate bracing/ propping
Hundred Fourteen
44 1,931.46 with steel props/ H frames etc. as directed by EIC including cost of de-shuttering and centering at all levels / all floors for plumbing Sqmt. 714.85
and Eighty Five Paise
electrical and civil works. Note : Plan area will be measured Height upto 13.0 M
Schedule B Page 14 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
Providing and position PVC Sleeves in RCC elements like walls slabs beams etc. of 6 Kg/cm2 UPVC Pipes and diameter of taking out service
pipelines cables road infrasturcture work etc. upto 0.3 to 1.0 mtr. length for all floors/ all levels / all heights. a) 75mm dia.
45 70.00 Each 170.09 Hundred Seventy
and Nine Paise Only
Providing and position PVC Sleeves in RCC elements like walls slabs beams etc. of 6 Kg/cm2 UPVC Pipes and diameter of taking out service Rupees Two
pipelines cables road infrasturcture work etc. upto 0.3 to 1.0 mtr. length for all floors/ all levels / all heights. Hundred Ninety
b) 100mm dia. Three and Sixteen
Providing and position PVC Sleeves in RCC elements like walls slabs beams etc. of 6 Kg/cm2 UPVC Pipes and diameter of taking out service Rupees Three
pipelines cables road infrasturcture work etc. upto 0.3 to 1.0 mtr. length for all floors/ all levels / all heights. Hundred Ninety Six
c) 160mm dia. and Seventy Five
Providing and Laying Brick work using common burnt clay building bricks having crushing strength not less than 35kg/Sqcm. in foundation Rupees Four
and plinth. In cement mortar 1:6 (1 cement : 6 fine sand) (B) Conventional Thousand Three
48 145.81 cum 4,345.62 Hundred Forty Five
and Sixty Two Paise
Providing and laying autoclave aerated concrete blocks as per drawing in single or multiple layers with Ready mix joining mortar.
Crushing strength of aerated concrete block shall not be less than 40 KG/sqcm, minimum density in oven dry condition between 651 to
750 KG/CUM, thermal conductivity shall not exceed 0.30 w/mk, fire resistant 4 hours, in true line level and plumb and cleaning the Rupees Four
surface with necessary tool tackles The drying shrinkage shall be not more than 0.05 percent for Grade 1 blocks and 0.10 percent for Thousand Eight
49 4,059.29 Grade 2 blocks when tested in accordance with IS : 6641 (Part-2)-1972 etc. at all floors, any heights, all depths, any levels (in foundation cum 4,813.66 Hundred Thirteen
and superstructure) and all places including curing, scaffolding, racking / flush jointing etc complete, as per drawing / specification and and Sixty Six Paise
approved by architect and as directed by Engineer Incharge for all civil, plumbing, electrical & infrastructure work Only
a) Any Floor & Any Height.
Providing and laying autoclave aerated concrete blocks as per drawing (Thickness 100 - 115 mm ) in single or multiple layers with Ready
mix joining mortar. Crushing strength of aerated concrete block shall not be less than 40 KG/sqcm, minimum density in oven dry
condition between 651 to 750 KG/CUM, thermal conductivity shall not exceed 0.30 w/mk, fire resistant 4 hours, in true line level and
plumb and cleaning the surface with necessary tool tackles, The drying shrinkage shall be not more than 0.05 percent for Grade 1 blocks Rupees Five
and 0.10 percent for Grade 2 blocks when tested in accordance with IS : 6641 (Part-2)-1972 etc. at all floors, any heights, all depths, any Hundred Twenty
levels (in foundation & Superstructure) and all places including curing, scaffolding, racking / flush jointing etc complete, as per drawing / Nine and Twenty
specification and approved by architect and as directed by Engineer -Incharge. . For all civil, plumbing, electrical & infrastructure works. Four Paise Only
a) Any Floor & Height.
Providing 10 mm thick cement plaster by using Ready Mix Mortar for plaster in single coat on brick/ concrete walls for interior plastering Rupees One
Any Floor level and finished even and smooth in Cement mortar 1:4 (1 Cement : 4 sand) including finishing etc complete. Hundred Seventy
a) Any Floor & Any Height. One and Seventy
Providing & laying 15 mm Ready Mix cement mortor 1:4 (1 cement : 4 coarse sand) cement plaster in single coat on ACC Rupees Two
Block/brick/concrete wall for interior plastering finished even and smooth including finishing etc complete. Including Water cement Hundred Twenty Six
Compound. and Twenty Four
a) Any Floor & Any Height. Paise Only
Schedule B Page 15 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
Providing & laying 20 mm thick double coat sand face/mala cement plaster for all floor all height with use of Ready Mix mortar on
interior/exterior Block, brick/ concrete work for plastering comprising of base coat of 12 mm thick cement plaster in cement mortar (1
53 14,066.46 cement: 4 coarse sand) in rough finishing and 8 mm thick top coat of cement mortar 1:2 ( 1 cement : 2 coarse sand) finished with trovel Sqmt. 337.34
Seven and Thirty
including scaffolding curing etc. complete. Including Water cement Compound.
Four Paise Only
Providing & laying average 18-20mm thick double coat water proof smooth/ wired finish cement plaster on sides of masonry work/ block
wall/ RCC wall, 12 to 15mm thick first coat in CM 1:3 (1 cement : 3 coarse sand) by spraying, second coat of 6mm of CM 1:3 (1 cement :
fine sand) and mixing water proofing compound powder & liquid of approved make in recommended proportions (by manufacturers) in
both coats including finishing with a flooting coat of neat cement slurry etc complete for all floor. and shall be guaranteed for minimum
Hundred Twelve and
54 3,892.67 period of 10 years after handing over the completed building by the main contractor to be finished as directed. Stamp paper guarantee Sqmt. 512.83
Eighty Three Paise
10 years to be furnished before receiving any payment from the client. Waterproofing powder & liquid of approved make recommended
proportions is to be applied before each coat and final finishing coat. (Item shall be operated for water retaining structures, sunks,
basement walls and other places specified by Architect/ EIC ).
Providing and applying hydrophilic crystalline based waterproofing system In two coat application.The application to be done from
+ve(positive) side on a wet open pore green concrete surface at coverage of 0.8to1kg/sqm as per manufacturer specification.It should be
hydrophilic in nature,should be able to grow crystals year after year to seal microcracks.The product should confirm to DIN1048 part5 and
should provide in depth crystallization.The material and application warranty to be given by manufacturer’s authorized
distributor/applicator on prescribed format for10 years.Note:- Treated area should be screeded using hydrophilic crystalline admixture
KIM(Krstol Internal Membrane) @ 2% for be stresults:-Application of crystalline coating to be done within 7days of casting of concrete
Hundred Four and
55 2,680.52 All the waterproofing activities shall be carried out by in-house application company of the principal material manufacturer and provide a Sqmt. 404.77
Seventy Seven Paise
written corporate Supply Apply Corporate Warranty from the principal manufacturer that all work executed will be free from defects in
materials, workmanship and free of leaks for a period of 10 years from the date of Work Completion, unless resulting from structural
defects or causes other than the work of this section. Said defects shall be remedied by the principal manufacturer for the period of the
warranty without additional cost to the owner for waterproofing material only. For Basement, Ug Tank, Toilet, Porch, Terrace
Providing and laying water proofing treatment in sunken portion of WCs, bathroom, Ug Tank With Structure etc., by applying cement
slurry mixed with water proofing cement compound consisting of applying :
(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be Rupees Five
allowed to air cure for 4 hours. Hundred Twenty
(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be Eight and Fifteen
allowed to air cure for 4 hours followed with water curing for 48 hours. Paise Only
The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed
Providing and laying in situ five course water proofing treatment with APP (Atactic Polypropylene) modified Polymeric memberane over
roof/Basement roof consisting of first coat of bitumen primer @ 0.40 litre per sqm, 2nd & 4th courses of bonding material @
kg/sqm, which shall consist of blown type bitumen of grade 85/25 conforming to IS : 702, 3rd layer of roofing membrane APP modified
Polymeric membrane 2.0 mm thick of 3.00 Kg/ sqm weight consisting of five layers prefabricated with centre core as 100 micron HMHDPE Rupees Four
57 535.60 film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20 micron HMHDPE film. 5th, the Sqm 455.40 Hundred Fifty Five
top most layer shall be finished with brick tiles of class designation 10 grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with and Forty Paise Only
2% integral water proofing compound by weight of cement over a 12 mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and finished
neat (item of laying brick tiles shall be paid for separately).
Schedule B Page 16 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
Basement outer retaining wall as per specifications below with minimum treatment warranty of 10 years
Providing and applying compatible polyurethane based primer on fully cured and properly prepared RCC surface. Concrete surface must
be dry with moisture less than 3% as tested by a digital moisture meter. All cracks must be filled with polymer modified mortar and all
honeycombs grouted.Allow the primer to cure for 4-6 hours. Provide and apply two coats of single component, high solids, cold applied
polyurethane elastomeric waterproofing membrane ELASTOROOF PU over the uniform surface of slab and wall at dosage of 1.8 kg per
sq.mtr in two coats to achieve the required minimum DFT of 1.2mm. Single component, cold applied polyurethane membrane should Rupees One
have following minimum properties:- Water permeability (DIN 1048) - Nil, Adhesion to concrete (ASTM D 1000)- >1.5 MPa (Concrete Thousand One
58 2,267.76 Fails), Tensile Strength > 2.0 MPa (ASTM D412), Shore A Hardness – 40 (ASTM D2240), Elongation at Break > 450 % (ASTM D412), Volume Sqm 1,120.85 Hundred Twenty and
Solids > 85%, non-dilutable by water and insoluble in water. The manufacturer of the liquid polyurethane membrane shall be Dakks ISO Eighty Five Paise
9001:2015 accredited for manufacturing and design and CE accredited as per the requirements of EN 934-2:2009+A1:2012 and Only
Construction Products Regulation CPR No. 305/2011. Products used 100% domestically sourced and manufactured by Indian origin
company under “Make in India” initiative. Providing and installing of 8 mm thick dimple protection board of approved make to prevent
the damage to membrane during backfilling. The protection board is to be spot-bonded on the applied waterproofing.
Providing and fixing Chicken wire mesh jali 16 x 24 or approved size of 22 gauge at junction of concrete and brick work / AAC Block work Rupees Two
or between different materials after making "V" grove between two different material surface and filled with rich cement mortar, nailing Hundred Twenty Six
etc complete for all floor, any height, all shape etc complete as directed by engineer in charge. and Twenty Four
Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 Rupees Twenty Two
60 4,597.67 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade Sqm 22.75 and Seventy Five
and disposal of surplus earth with Any lead & Lif. Paise Only
Providing, laying, spreading and compacting graded stone aggregates to Wet Mix Macadam in thickness as per MORT & H specification Rupees Nine
including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tippers to site, laying in Hundred Eighty Two
uniform layers with paver or motor grader in sub base / base course on well prepared surface and compacting with vibratory roller to and Seventy Three
achieve the desired density. Complete as per MORT & H clause 406 Paise Only
Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at
OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor
Hundred Sixty Three
62 689.65 grader on prepared surface and compacting with Vibro roller to achieve the desired density, complete as per specifications and directions cum 763.56
and Fifty Six Paise
of Engineer-in-Charge.
With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBRValue-30
Providing and laying cement concrete 1:4:8 (1- Cement : 4- coarse sand : 8- hand broken stone aggregates 20 mm nominal size) and curing Rupees Two
complete Including cost of formwork in (A) Foundation and Plinth Thousand Seven
63 574.72 cum 2,739.86 Hundred Thirty Nine
and Eighty Six Paise
Providing and laying in position Ready Mixed M-250 grade concrete for RCC Trimix floor having compressive strength not less than
Mpa/mm2 on prepared sub-base / floors etc. Surface shall be finished using vaccume dewatering method to achieved finish surface using Rupees One
metallic silica base hardener & tough surface using recron - fiber as per manufacturer's guideline and IS standards. minimum floor Thousand Ninety
hardent to be used as 3-4.5 kg/m2 area of works. Construction joints shall be provided at every 3m distance having groove of size 25mm Seven and Eighty
wide & 1/4 deep of total floor thickness with filling groove with silicon sealant. Rate are inclusive of required reinforced concrete of grade Seven Paise Only
M25 and 150mm thickness, tools, tackles, laser skid finished using vacuumed dewatering method, machinery, chemicals & resources etc.
Schedule B Page 17 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
Natural crushed Granite Spray Thickness 1.5mm- 1.8 mm ( TEXTURE PAINT)Providing and applying acrylic aggregate textured non
pigmented wall finish coating in 100% natural / non pigmented Crushed Granite stone finish as per sample approved by Engineer-in-
charge on the exterior walls of the building.The first coat shall be of low VOC Acrylic primer mixed with wall sealer (Ratio 1:1)at the rate of
0.15- 0.20 ltr per sqm. The texture material shall be applied at the rate of average 2.0- 2.5 kg / square meter and average 1.5- 1.8 mm
thickness on the exterior walls. Any Flaking, Plaster of Paris, Gypsum or other absorbent material surfaces should be brushed and
removed. All undulations, broken edges, irregularities should be rectified before application of the textured layer. The textured layer shall
be applied in two layers, first with with special plaster spray gun with a pressure 2bhp to achieve a uniform texture and the second coat Rupees One
with same process as repeat & Finishing walls with a clear coat in two coats that incorporate hitech-fluorocarbon resin which act as Thousand One
65 10,212.35 protective shield against ultraviolet rays , it will further enhance & protect all surface coating as recommended by the manufacturer and Sqm 1,146.35 Hundred Forty Six
as per the direction of Engineer-in-charge. as per the approved sample complete to the satisfaction of Engineer-In-Charge upto all floor and Thirty Five Paise
height levels as per drawings.Application Process1. Applying Priming coat of acrylic Primer mixed with wall sealer & water in the ratio of Only
(1:1).in approved shade 2. Repair check of plaster surface with Exterior grade cement mixed with Primer.3. First coat to obtain highly
dense smooth appearance of 0.5 to .8 mm thick by applying over the primer. to be applied with spray / trowel depends upon the
surface5. .Second coat of 100% natural crushed granite material 0.8 to .1.00 mm thick by applying a spray gun with a pressure of 2bhp to
achieve desired finish.6. two coat of water base Protective.
Providing and applying 2mm thick Texture Paint of Earthen Textures, Travertino Texture, Coral texture or equivalent make incorporating
fine filaments made of polymer and aggregating natural stone powder with making grooves on existing base coat of 20 mm thick smooth
mala plaster etc.
This product is a special textured decorative paint. Based on acrylic copolymer emulsion. Can provide variety of patterns when applied
with different techniques. Covers minor cracks and undulations in the surface. Resistant to algae and fungus.
66 3,608.85 Sqm 454.50 Hundred Fifty Four
The product shall have a Volume Solids of minimum 75 ± 2 volume%
and Fifty Paise Only
This product shall have a VOC limit not more than 17 g/l ISO 11890 EU.
The Texture shall have a DFT – 2MM to be achieved in one coat
The product can be like Profile décor (Rustic) of Jotun Paints or approved equivalents.
The texture shall be applied by conventional Nylon or steel trowel at the site. "
Providing and applying Wall painting (two coats) with plastic emulsion/Apex ultima paint of approved brand and manufacture on Rupees One
undecorated wall surface to give an even shade including throughly brushing the surface free from mortar droppings and other foreign Hundred Twenty
matter and sand papered smooth. Five and Eighty
Three Paise Only
White washing with lime on wall surface (two coats) to give an even shade including thoroughly booming the surface to remove all dirt, Rupees Thirteen
68 2,379.68 dust; mortar drops and other foreign matter. Sqm 13.66 and Sixty Six Paise
Finishing wall with weather proof low velocity ultima exterior emulsion paint on wall surface (two coats) Including 2 coat primer and
Coat Putty (If required) on wall surface to give an required shape even shade after thoroughly brushing the surface to remove all dirt,
and remains of loose powdered materials. Etc complete for all height
69 10,403.52 Sqm 167.10 Hundred Sixty Seven
and Ten Paise Only
Schedule B Page 18 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
Applying two coats of acrylic lapy ( putty) & two coats of primer of approved brand and manufacture on new wall surface to give an even
Rupees Forty and
70 59,558.73 shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth. Sqm 40.59
Fifty Nine Paise Only
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade on new steel or other metal surfaces,
including a preliminary application of one priming coat of approved steel primer (Red Oxide Zinc Chromate) followed by two or more Rupees One
coats of enamel paint. The process includes thorough surface preparation by manual or mechanical means (wire brushing/sandpapering) Hundred Thirty Four
to remove all rust, scale, dirt, and foreign matter, followed by brushing for interior application to achieve a uniform, streak-free finish, and Ninety Three
including all materials, labor, and tools as per the instructions of the Engineer-in-charge. Paise Only
Providing and applying two or more coats of heavy-duty Epoxy paint / Damp-proof waterproofing paint of approved brand and
manufacture on basement walls/floors to give an even shade. The work includes thorough cleaning of the surface by wire brushing or
Hundred One and
72 6,799.11 mechanical grinding to remove all dirt, oil, grease, and loose particles, applying one coat of compatible primer as a base, and ensuring a Sqm 201.27
Twenty Seven Paise
seamless, moisture-resistant finish. This includes all labor, materials, scaffolding, and surface preparation as per the instructions of the
Engineer-in-charge.
Providing and fixing rough ground (packing) in the gap between wall or stone sill jambs and frame. The frame assembly / surfaces to
which is to be fixed with srews shall be inclusive (1) Anchor fastners of Hilty HRDUGT-10 X 140 x70mm or equivalent at approx 2 nos. in 2 Rupees Eight
rmt length of part thereof as required to fix the aluminium frame) Av. 8 mm thick wooden seasoned C.P. teak wood / water proof marine Hundred Eleven and
ply confirming to IS 710 filling the gap between wall or stone jambs, sills and frame on all sides (inside / outside) and along the perimeter Seventeen Paise
first with polyeurothene baker rod and av. 10 mm thickness and then sealing the remaining gap with neutral grade sealant of approved Only
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other
Frames/Chowkhat comprising of virgin PVC polymer of K value 58- 60 (Suspension Grade), calcium carbonate and natural fibers (wood
powder/ rice husk/wheat husk) and non toxic additives (maximum oxicity index of 12 for 100 gms) fabricated with miter joints after star
headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge),minimum
compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property
of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of
74 278.47 Rmt 3,720.48 Hundred Twenty and
required dia and length complete as per direction of Engineer-In- Charge. Note: For WPC solid door/window frames, minus 5mm
Forty Eight Paise
tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable
but no extra payment on this account shall be made. applying PVC solvent cement and screwed with full body threadedComplete as per
direction of Engineer-in-Charge.
1) Frame size 50 x 100 mm
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of required
size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice
husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw
withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and Rupees Three
resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. Thousand Four and
WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of Seventy Five Paise
shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, Only
all as per direction of Engineer-In- Charge. Material test certificate and authentication should be compulsory provided by the
manufacturing company 1) 30 mm thick
Schedule B Page 19 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open
joints) for linear as well as curvilinear portions of the building for all heights and all levels, including:
(a) Structural analysis & design and preparation of shop drawings for the specified design loads conforming to IS 875 part III (the system
must passed the proof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sections
for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts,
clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)- cum-smoke seals, microwave cured EPDM gaskets for
water tightness, pressure equalisation & drainage and protection against fire hazard including:
(b) Fabricating and supplying serrated M.S. hot dip galvanised /Aluminium alloy of 6005 T5 brackets of required sizes, sections and
profiles etc. to accommodate 3 Dimentional movement for achieving perfect verticality and fixing structural glazing system rigidly to the
RCC/ masonry/structural steel framework of building structure using stainless steel anchor fasteners/ bolts, nylon seperator to prevent
bimetallic contacts with nuts and washers etc. of stainless steel grade 316, of the required capacity and in required numbers.
76 41.25 SMT 3,182.96 Hundred Eighty Two
(c) Providing and filling, two part pump filled, structural silicone sealant and one part weather silicone sealant compatible with the
and Ninety Six Paise
structural silicone sealant of required bite size in a clean and controlled factory / work shop environment, including double sided spacer
tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per the approved sealant design, within and all
around the perimeter for holding glass.
(d) Providing and fixing in position flashings of solid aluminium sheet 1 mm thick and of sizes, shapes and profiles, as required as per the
site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it watertight.
(e) Making provision for drainage of moisture/ water that enters the curtain glazing system to make it watertight, by incorporating
principles of pressure equalization, providing suitable gutter profiles at bottom (if required), making necessary holes of required sizes and
of required numbers etc. complete. This item includes cost of all inputs of designing, labour for fabricating and installation of aluminium
grid, installation of
glazed units, T&P, scaffolding and other incidental charges including wastages etc., enabling temporary structures and services, cranes or
Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double
glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm thick, of
approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade, an inner Heat strengthned clear float
glass 6mm thick, spacer tube 12mm wide, dessicants, including primary seal and secondary seal (structural silicone sealant) etc. all
complete for the required performances, as per the Architectural drawings, as per the approved shop drawings, as specified and as
directed by the Engineer-in-Charge. The IGUs shall be assembled in the factory/ workshop of the glass processor. Rupees Three
(Payment for fixing of IGU Panels in the curtain glazing is included in cost of item No.25.2) For payment, only the actual area of glass on Thousand One
77 4.13 face # 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be SMT 3,142.56 Hundred Forty Two
measured in sqm. and Fifty Six Paise
(i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, + 12mm Airgap + 6mm Heat Strengthened clear Only
Glass of approved make having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light
reflection external 10 to 20 %, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. The properties of
performance glass shall be decided by technical sanctioning authority as per the site requirement.
Extra for openable side / top hung vision glass panels (IGUs) including providing and supplying at site all accessories and hardwares for Rupees One
the openable panels as specified and of the approved make such as heavy duty stainless steel friction hinges, min 4 -point cremone Thousand Eight
78 8.25 locking sets with stainless steel plates, handles, buffers etc. including necessary stainless steel screws/ fasteners, nuts, bolts, washers etc. SMT 1,848.51 Hundred Forty Eight
all complete as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer- and Fifty One Paise
in_x0002_Charge. Only
Schedule B Page 20 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
Providing, fabricating and supplying shadow box of required size and shape, for fixing in the spandrel portion of the structural glazing, in
linear as well as curvilinear portions of the building by providing semi -rigid, inorganic, non-combustible fibre glass wool insulation 50 mm
thick, conforming to IS: 8183 and BS: 3958 Part 5. The insulation layer shall have facing (factory bonded on surface # 1 of the fibre glass
Thousand Eleven
79 12.36 insulation layer), of black non-woven fibre glass tissue of nominal thickness 0.5 mm and nominal mass not less than 60 gm /sqm, made of SMT 6,011.52
and Fifty Two Paise
randomly oriented glass fibres distributed in a binder by a wet-lay process including fixing 1.5 mm thick solid aluminum sheet backing
using, 6 mm thick cement board including SS rivets, nuts, bolts, washers etc complete.
Glass Door With Patch Fitting
Providing and fixing Frameless 12 mm Glass Door with S/S Patch fitting consisting of 12mm thick etched toughened glass with Patch
fittings such as Top Pivot, Top patch ,Bottom Patch, Corner Lock with EPC, Lock keeper plate, 'H' Pull Handle 450 (ctc 350mm* dia 25mm)
and Floor spring with standard spindle conforming to CE marked, non-handed unit suitable for doors up to 120 kg leaf weight, with
adjustable spring strength (size EN 1 – 4) and closing speed, with closing action operational from approx. 175°, fixed hold open at 90° and
SS cover plate. Featuring hydraulically fully controlled closing cycle, mechanical backcheck and including cement box. Dimension of the Rupees Sixty Three
80 1,730.40 floor spring body - Length - 285 mm, width - 82 mm and Height - 50 mm & Weight - 3 Kg. Finish : Satin Stainless Steel. (NOTE: Opening size SMT 63.76 and Seventy Six
900mm x 2100 mm Single Leaf, each Leaf weight upto 120kg). The above work complete in all respect as per approved drawings and to Paise Only
the satisfaction of Engineer-in-Charge/ Architect Consultant.The rate shall include the cost of providing & fixing 1 nos of 50mm X 100mm
X 1200mm ply wood member for fixing the S/S patch fitting at lintel level The list of the items s/s fittings & accessories shall be as below:
Pivot with fixing plate, material thickness 3 mm, to let into the ceiling PT Standard Bottom Patch Fitting SS Finish.
Providing and fixing in position collapsible steel shutters with vertival channels 20 mm x 10 mm x 2 mm braced with flat iron diagonals
mm x 5 mm size with top & bottom rails of T iron 40 mm x 40 mm x 6 mm with 38 mm diameter steel pulleys complete with bolts, nuts,
81 751.85 locking arrangements, stopper handles including applying a priming coat of red lead paint. Kg. 3,436.02
Hundred Thirty Six
and Two Paise Only
Providing and fixing ISI marked 35mm thk. Flush door shutter conforming to IS: 2202 (Part - 1 1980). 35mm thk. Flush door of approved
quality factory made solid core flush door shutter in single and double leaf fixing on Granite stone frame (Granite stone Frame shall be
paid seperately)as per drawing. 1mm thk. Laminate sheet of approved colour / shade on the both side of 35mm flush door. The timber
shall be free from decay and insect attack knots and knot holes. The flush door shutter to be ready factory made with both side hardwood
ply board faced, pine - wood core in continous gapless section with butt joints tightly factory bonded with hot press process on both face Rupees Four
82 18,486.68 of the core with plywood. including ISI marked hardware door fitting of handle & lock complete in all respects including anti-termite Smt 462.08 Hundred Sixty Two
treatment.Handles:- SS Handle, Lock :- cylindrical lock , Hinges :- 4 Nos SS Hinges –Heavy gauge each shutter, Tower Bolts:- 2 Nos stainless and Eight Paise Only
steel each shutter and Stopper, Also Vision Panel for 6 mm Clear Glass with Polish bidding patti to fix it, all materials and labour etc.
complete as per detail drawing and instruction of engineer-in charge and consultant.
Schedule B Page 21 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
Providing and fixing of Anodised/Powder Coting Aluminium (Matt finish) frame work (Horizontal and verticals , Styles and rails, ball
bearing) for Doors/ window/ventilation/alluminum partition with required Domal sections including fixing all items and hinged / pivoted
arrangements for operation of shutters and labour cost for fixing of door fittings and locks including all items and contingencies
described above complete (Aluminium beadings and glazing clips & section measured under this item only) NOTE : All fitting works shall
be carried out as per I.S. specifications including cost of necessary rivets, screws, lugs, scaffolding, rubber gaskets etc., complete all
generally as per drawings. The sizes of the components should confirm as per details in drawings. Providing and fixing at all heights / in all
floors with all leads. Colour Anodised Aluminium doors / windows / partitions manufactured from best extruded Aluminium sections
confirming to ISI cut to length, joints mitred and corners grinded with joints water proof the outer frame and shutter frame stiffened with
corner angle and strips provided for in the frame for fixing the frame to R.C.C Columns / masonry/Granite Frame on sides, R.C.C
Thousand Fifty Five
83 1,606.96 lintels/Granite Frame on top and P.C.C sills or floor at bottom, the frame work fixed with standard approved fastenings all generally as KG 1,055.45
and Forty Five Paise
per details shown in drawings and specification with all the sections pretreated for removal of any rust & scales and prevention of further
rust/scale formation and coated with greasy materials for non-adherence of mortar or any other sticky materials and this coat to be
removed after installations 1)Sheet metal screws, wool pile and aluminium angle corner cleat of required thickness and of full width, etc.
for assembling the frame and shutter; 2)Glazing clips for receiving infill panel for Double Glazed Unit (DGU), any type of Glass, Compact
Sheet, Louvers; 3) Best quality wool pile where ever shutter touches the frame; 4) Anchor fasteners for fixing the frame assembly to the
RCC or Granite or masonry surfaces etc. complete.
Note:-As per drawings and design supplied by architect and instruction given by authority and E.I.C.
Providing and fixing Clear Float Glass of any size, any shape and specified thickness and SHGC velue 86 % in frame and shutter work with
necessary cutting of glass as per drawing & specifications including providing and fixing EPDM quality rubber/silicon sealant/structural Rupees Two
sealant of 3M tape on the periphery of the glass as per the required thickness etc. complete a tall floors/alllevels/all heights as per the Hundred Forty Eight
directions of Architect. Actual installed quantity shall be measured and paid. Rate shall be inclusive of all type of wastage. (a) 5/6 mm and Twenty Two
thick Paise Only
Extra Charges for frosted glass /Texture Glass (as per drawing / instruction by Architect/ EIC) Rupees One
85 159.15 Smt 1,344.31 Hundred Forty Four
and Thirty One Paise
Providing and fixing Tinted Float Glass of any size, any shape and specified thickness and SHGC velue 25 % in frame and shutter work with Rupees One
necessary cutting of glass as per drawing & specifications including providing and fixing EPDM quality rubber/silicon sealant/structural Thousand One
86 76.23 sealant 3M tape on the periphery of the glass as per the required thickness etc. complete a tall floors/alllevels/all heights as per the Smt 1,177.66 Hundred Seventy
directions of Architect. Actual installed quantity shall be measured and paid. Rate shall be inclusive of all type of wastage. (a) 6 mm thick Seven and Sixty Six
Providing and fixing Compact Sheet of any size, any shape, specified thickness in aluminium frame and shutter work with necessary
cutting of sheet, single side, double side coloured as per drawing & specifications including providing and fixing EPDM quality Rupees Seven
rubber/silicon sealant/3Mtape/screwing on the periphery of the sheet as per the required thickness etc. complete at all floors/all Hundred Thirty One
levels/all heights as per the drawing & directed by EIC/Architect. Cut edges of the compact sheet shall be provided with masking tape. and Fifty Two Paise
Actual installed quantity shall be measured and paid. Rate shall be inclusive of all type of wastage.(a) 6 mm thick (Plain) Only
General Notes for Hardware : Supplying and fixing heavy quality fixture sand fittings for doors, windows, ventilators, partition wall,
cabinets with necessary screws, nails, machine pins etc. at all floor/all levels/all heights complete. The fittings and fixtures hardware . The
Hundred Thirty Four
88 129.00 fixture & fastenings shall be provided as under : Providing & fixing heavy duty"Euro profile Mortise Dead lock"(12.6cm 1CK brass)with No. 334.31
and Thirty One Paise
minimum 6keys in door/window with necessary screws and as per drawing, complete as approved by Architect / EIC.
Schedule B Page 22 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
Providing & fixing SS 304 grade Baby latch" Door Bolt" size of 3.5"with hair line finish with necessary s.s. screw sand as per drawing, Rupees Four
complete as approved byArchitect / EIC Hundred Fifty Nine
and Fifty Five Paise
Providing & fixing heavy quality SS AISI 316 grade "Butt Hinge with 4 Bearing"of 102X76X3mm with necessary s.s. screws and as per
drawing, complete as approved by Architect / EIC
Hundred Ten and
Fifty Nine Paise Only
Providing & fixing SS 316 Medium Duty Hydraulic Floor Spring for 80to130KG with cover plate & adjustable concealed casted top pivot of Rupees Seven
any color with necessary screws and as per drawing,complete as approved by Architect. Rate shall be inclusive of cutting off loor neatly, Hundred Sixty Two
grouting the floor spring & cleaning/ polishing the floor & maintaining in good working condition till defect liability period with one year and Fifty Five Paise
guarantee. Only
Providing & fixing SS 304 grade of brush/satin finish specified size Tower Bolt with necessary screws and as per drawing, complete as
approved by Architect / EIC.
Hundred Sixty One
and Fifty Paise Only
Providing & fixing SS AISI 316 grade of glossy/satin finish specified size Push-Pull Handle in pairs with necessary screws and as per Rupees Nine
drawing, complete as approved by Architect/EIC. Hundred Thirty Six
a) 22mm (diameter) x 300mm and Twenty Seven
Providing and Fixing heavy duty S.S. Door Closer as directed by Engineer In charge. Rupees One
94 37.00 No. 104.12 Hundred Four and
Twelve Paise Only
Providing and fixing bright finished brass hanging type floor door stopper with necessary Rupees Three
screws, etc. complete. Thousand Six
95 433.47 No. 3,653.20 Hundred Fifty Three
and Twenty Paise
Providing, fixing & designing of DGU glass panel system of approved make at any levels/ any heights/ all floors. as per approved make of
any size, any shape and specified thickness in frame and shutter work with necessary cutting of glass as per drawing & specifications
including providing and fixing EPDM quality rubber/ silicon sealant/ structural sealant as per approved make of 3M tape on the periphery
of the glass as per the required thickness etc. complete at all floors/ any levels/ any heights as per the directions of Architect. Selection of
glazing to be made as per structural stability, panel size, wind load before execution. All sections and accessories shall have to be
approved by Architect before execution. Test certificates for SHGC & U-value to be submitted to architect / EIC for verification and must Rupees Six Hundred
be approved by EIC. DGU Panels should be factory fabricated and should be as per approved manufacturers specifications. DGU Glass Ninety Eight and
system shall be 6 mm reflective toughened glass + 10 to 12 mm air gap between filled with argon inert gas and hermetically sealed + 6 Ninety Two Paise
mm toughened glass which will take care of SHGC= 0.39, U value= 0.61BTU/hr.sqft. Deg F or 3.46 W/sqm K. Manufacturer should take the Only
onsite measurement of the work before placing the order of DGU and should also ensure civil works adequacy for installing the system.
Manufacturer should also submit data sheet before placing of the order to confirm it technical data to architect. Contractor to submit
year gurantee bond to client for entire system. Aluminium section will be paid seperately in relevent item by weight.
Schedule B Page 23 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
Providing and fixing Stainless steel mosquito net jali ,wire of I.S gauge designation 85-G with wire of 0.56 mm fix in aluminium door, Rupees One
window, ventilator shutters of any size, any shape with etc all complete at all floors/all levels/all heights as per the architectural Hundred Fourteen
drawings and the directions of Engineer-in-Charge. Actual laying installed Jali shall be measured. (Cost of aluminium snap beading shall and Sixty Two Paise
be paid in basic item) Only
Providing and fixing M.S. grill of required pattern in frames of windows etc. with M.S.. flats with MS Round & Square Bar at required
spacing and frame alround square or round headed bolts and nuts or by screws.including applying a priming coat of red lead paint and
two coats of oil painting etc complete (A) Plain grill
98 3,512.59 KG 1,569.17 Hundred Sixty Nine
and Seventeen Paise
Providing and laying coloured glazed / Matt Finish of the size 300 mm x 450 mm x 8 mm/600 mm x 600 mm x 8 mm or approved size in Rupees Three
skirting, risers of steps and dedo on 10 mm. thick cement plaster 1:3 (1 cement : 3 coarse sand) & jointed with white cement slurry. Hundred Sixty Five
Including construction adhesive in required propotion as per manufacturs specification. and Sixty Two Paise
Providing and laying 19mm x 65mm round ,'D' edge and polished granite pencil patti on top, with cement paste and including backing Rupees One
coat in C.M. 1:4. All joints filled with colour / epoxy grout and wiped to give sharp joints with flush pointing and washed clean with acid Thousand Four
100 983.65 etc. Rmt 1,472.91 Hundred Seventy
Two and Ninety One
Providing and laying 600 X 600 Full Body vitrified 8 mm thick tile flooring over 40 mm (average) base of adhesive/cement mortar 1:6 (
cement : 6 coarse sand ) on new surface in all colours and shade, jointing with grey cement slurry @3.3 kg/sqm including grouting the Rupees One
joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only. including finised Thousand Five
with flush pointing & cleaning the surface etc. complete for For Matt/Antiskid finish. Hundred Forty Eight
and Sixty Paise Only
Providing and laying 1200 X 600 Full body vitrified floor tiles in different sizes with an approved surface finish (Polished, Matt, Satin, or
Rustic), having 3/4/5mm groove (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to Rupees One
IS : 15622, of approved make, in all colours and shades, laid on upto 60 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including Thousand One
102 962.50 grouting the joints with white cement and matching pigments etc. complete. Colour and shade as approved by architect. All joints filled Sqm 1,127.48 Hundred Twenty
with epoxy grout.Rate includes of all tool, tackle, machinery, labor & floor protection system to protected floor by either floor protection Seven and Forty
sheet or Plaster of Paris work until hand over of building, all lead & lift & as per directed by EIC. Eight Paise Only
White Glazed Tiles Rupees One
Providing and laying white glazed tiles 6mm thick in skirting risers of steps,dedo and flooring on 10-20mm thick adhesive/cement plaster Thousand Three
103 166.86 1:3 (1-cement : 3-coarses and ) and jointed with white cement slurry Sqm 1,373.60 Hundred Seventy
Three and Sixty Paise
Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less
than 0.5% and conforming to IS:15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard,
multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including
104 63.94 Sqm 4,535.74 Hundred Thirty Five
grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.
and Seventy Four
Schedule B Page 24 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
Providing & laying average 50mm-65mm thick wired finish screed of cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone Rupees Five
agreegate 20 mm nominal size ) as base material for any type of flooring works in building,general development area works etc. laid to Thousand Eighty
achieve proper slope or 0-0 levelled surface and curing complete excluding cost of formwork at any type of surface ,all floors ,all levels, all Nine and Thirty Nine
heights as per drawing & directed by EIC/Architect. Paise Only
Providing and fixing Sandwitch type Granite platform including supplying and fixing granite stone 16-18 mm thick mirror polished 1st Rupees One
quality Granite stones in top and side posiition and vertical strip at front over 25 mm thick polished kotah stone platform fixing in top Thousand Nine
106 964.17 and sides and itermediates supports fixing with cement mortar and adhesivee and finishing including cutting for fixing of sink any size Sqm 1,962.43 Hundred Sixty Two
(as directed by engineer incharge) at required position etc complete. and Forty Three
Providing and laying Granite slab (16-18 mm thick) one side polished flooring over 20 mm (average) base of cement mortar 1:6 (1cement : Rupees Two
6 coarse sand) or L.M 1:1.5 laid and jointed with grey cement slurry including rubbing and polishing complete as per drawing & directed Thousand Fifty Six
by EIC/Architect. including making edge moulding & making groove any nos. as per pattern of Architectural Drawing etc. complete. and Thirty Six Paise
Providing and laying Granite slab (16-18 mm thick) one side Acid Wash finish flooring over 20 mm (average) base of cement mortar 1:6 Rupees Two
(1cement : 6 coarse sand) or L.M 1:1.5 laid and jointed with grey cement slurry including rubbing and polishing complete as per drawing & Thousand Four
108 2,883.85 directed by EIC/Architect. including making edge moulding & making grooves (any nos.) as per pattern of Architectural Drawing etc. Sqm 2,470.46 Hundred Seventy
complete as required and Forty Six Paise
Providing and laying 16–18 mm thick polished granite of approved make, colour, shade, and specified size for two-piece door and
window frames, including jambs, sills, skirting, treads, risers, dado, and wall cladding, fixed with a minimum of two coats of approved
construction chemical/granite adhesive as per the manufacturer's specifications, including cutting, dressing, drilling holes, SS screw fixing Rupees One
with suitable fasteners wherever required, rubbing, polishing, edge moulding, groove making (any number), rounding of edges, filling all Thousand Nineteen
joints with matching coloured cement putty, flush pointing, cleaning and washing the finished surface with acid, and all labour, materials, and Thirty Nine Paise
tools, tackles, scaffolding, wastage, and incidental works complete, as per the Architect's drawings, specifications, and the directions of Only
the Engineer-in-Charge (E.I.C.).
Providing and laying average 25 mm thick mirror polished kotah stone of approved quality, selected and sorted for uniform colour in
floor, otta, platform, etc. of required sizes upto 600 x 600 mm fix size ( No Variation) as per design in normal pattern (straight or staggered
joint with square or rectangular shaped stone) and residue as per drawing including 1:6 (1 cement : 6 sand) cement mortar bedding of
average 20 mm thickness jointed with grey cement and colour pigment in proportion to match the shade of kota stone. Rubbing and
110 210.31 Sqm 1,198.64 Hundred Ninety
polishing to be done with 2 coats of 60, 120 grades of emery, balckchapadi and gutka for special polish after it polishing to be done with
Eight and Sixty Four
220, 320, 400, 600 grades of emery till mirror finish is achieved. Curing, daily moping with water & kerosene as directed for at least
days after final polishing etc. complete upto the satisfaction of the Architect or Engineer-in-charge. (NO WAXING WILL BE PERMITTED).
Providing and laying polished kota stone slab 25 mm thick in skirting, risers of steps, dedo and pllars laid on 10 mm thick cement mortar Rupees Seven
1:3 (1 cement : 3 coarse sand) and jointed with gray cement slurry including rubbing & polishing etc. complete. Hundred Ninety
Nine and Ninety Two
Providing and laying machine cut free edges machine double polished Kota stone for shelves in cupboard and walls in single piece Rupees Two
(Maximum 1.50 mt.) 25 mm including cutting grooves in walls and fixing the stone with neat cement slurry in true line and level as Thousand Four
112 363.67 directed etc. complete. for Shelves Sqm 2,439.41 Hundred Thirty Nine
and Forty One Paise
Schedule B Page 25 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
Providing & fixing 10.5 mm thick (Armstrong/Floor Master) engineer wood on flooring & dedo American exotic bruce 7 layer construction, Rupees Three
top layer of wood veneer 2mm ,plank size width 120 mm ,length 400-1200 mm, Lock & fold locking ,premium finish, micro bevel Thousand Forty Five
edges/ends with an underlayment made of natural colour foam, with accessories like end profile, transition profile, reducer and Thirty Five Paise
,etc.complete.The profiles are 100% matching. profile at door openings Only
Providing & fixing Wall panelling made of 50mm x 25mm aluminium square pipe C/C - 600mm horizontal & vertical member structure.
The structure covered with 12mm plywood finished with 1mm thk. Laminate finished and electrical conducting and net wiring etc. All Rupees Four
exposed edge wooden beading finished with melamine polish on surfaces openable facility with necessary hardware as per design and Thousand Nine
instruction as directed by site in-charge or architect. Complete as per detail drawing. including cost of required Cut-Outs, decorative Hundred Eight and
mouldings /finishing items/Scaffolding, and for all heights as per complete as per instruction of engineer-in charge and consultant. Sixty Paise Only
Full ht. partly glazed partition Providing and fixing full height partly glazed partition with 8mm glass installation upto ceiling or beam
bottom as per drawing and the structural framing of Aluminium square pipe size of 50mm x 25mm and 1.6mm thick all vertical and
horizontal member 600mm c/c both direction fixed by aluminium angle size of 25mm x 25mm x 25mm for proper finishing with
both side cover with 8 mm plywood with grooving detail as per design. All exposed edges shall be covered with necessary sizes
wooden patti finish with lacquer polish in approved shade. Fixing properly without any air gap and finishing with selected 1mm thick
115 426.42 Sqm 2,282.20 Hundred Eighty Two
laminate in two colour combination as per design. The glass shall be finished with vinyle film as per design. Before installation, make
and Twenty Paise
hole/face plate for conduit pipes of electrical / networking cables with openable stud from partition. Rate shall include necessary itching
film, Including all materials and labour etc. complete as per detail drawing and instruction of engineer-in charge and consultant.
(Mode of measurement shall be till false ceiling lvl.)
Vinyl graphic poster:-
Providing and fixing premium-quality vinyl graphic posters made from 3M or equivalent self-adhesive vinyl material, ensuring UV Rupees Three
resistance, waterproofing, and vibrant, long-lasting colors. The posters shall be digitally printed at a resolution of 1200 DPI or higher, Thousand Five
laminated with a matte or gloss finish as specified, and carefully applied to the designated surface with bubble-free installation using Hundred Thirty Five
adhesive solution on paneling and walls. The work includes surface cleaning, preparation, and all necessary tools, materials, and labor, as Only
directed by the Engineer-in-Charge.
Designing, detailing, providing, and fixing in position CNC-cut acrylic sheet artwork on the wall, incorporating a precisely cut portrait and
an inspirational quote as per the given details, drawings, and instructions of the architect/consultant/engineer-in-charge. The acrylic
sheet shall be of high quality, conforming to the specified thickness and density, ensuring durability and aesthetic appeal. The work Rupees Three
includes precision CNC or laser cutting, finishing, edge treatment such as polishing or beveling for smooth, clean edges, and installation Thousand Two
using adhesive solutions or stud-mounted techniques. The installation process includes proper alignment, secure fixing with appropriate Hundred Eighty Two
fittings like mounting brackets, screws, and spacers, ensuring stability and a seamless appearance. All materials, labor, tools, and and Fifty Paise Only
transportation shall be included to complete the work as per approved specifications and high-quality workmanship.
Schedule B Page 26 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
polyfibre panels / Acoustical panelling :- Providing and fixing polyfibre panels including 12 mm plywood sheet with adhesieve, favicol
SR, core-pigmented, high-density, SynthPF rigid panels of size 1200x2400x9mm thk, volume density 210 - 230kg/m3, weight 1.9 -
2.1kg/m2 installed by using Anutone Strut framework system. The Anutone Strut framework systems includes Anutone Strut CC25 Cross
Channel having thickness 0.55mm, length 3600mm, knurled web 50, depth 25mm and equal flanges 15mm is fastened to wall positioned
horizontally in a regular manner at 600mm c/c. Anutone Strand, Square edge, Magnesite bonded pinewood fibre core tiles of size Rupees Six
600x1200x10mm, density 400 kgs/m3, weight 8kg/m2 are fastened to Strut CC25 Cross channel with suitable fasteners. Longer edges of Thousand One
118 657.71 the panel should be perpendicular to Strut CC25 Cross Channel. Synth Slim Panels are then adhered to strand behind with stick S7 Sqm 6,103.26 Hundred Three and
adhesive. The system is backlined with the acoustical infill Anutone SynthPF 5x25. Technical Parameters of Synth Slim Fire (Class) – B, Twenty Six Paise
Acoustics – NRC 0.4 (For A mounting), Thermal conductivity (W/mk)– na, Climate (°C, RH) – 50, 99, Light reflectance (%) – Colour Only
Dependant, Green (VoC, RC %) – Nil, 30 ; Technical Parameters of Strand , Fire (Class) – 1 & P ,Acoustics – NRC 0.90 (For 25mm C50
Mounting), Thermal conductivity (W/mk)– 0.1, Climate (°C, RH) – 50, 95, Light reflectance (%) – 80, Green (VOC, RC %) – Low,
Acoustical Wooden Panelling
Providing and Fixing Channeled Woodworks perforated panels of width 192mm, thickness of 15mm and length 2400 mm or as required
by approving engineer, made of a high density fibre board with minimum 595 Kg/M3 density substrate with a laminated facing as per the
approved shade & finish and a melamine balancing layer on the reverse side. The boards shall have a special perforation pattern where
the visible surface has a “Helmholtz” fluted perforation of 3mm width and 5mm/ 13mm/ 21mm of visible panel each. The edges of the
panels shall be “tongue-and-grooved” to receive special clips for installation. The back of the perforated panel shall have sound Rupees Six
absorbing non-woven acoustical fleece having NRC of 0.59. The panels shall be mounted on special aluminium splines using clips Thousand Three
119 1,973.12 provided by manufacturer and approved by Engineerin-Charge. Sqm 6,375.63 Hundred Seventy
INSTALLATION: Five and Sixty Three
Install wooden battens of section 50x50mm or as approved on the solid wall horizontally using screws and plugs at spacing of 600mm Paise Only
centre-to-centre. Screw the aluminium extruded keel for channelled woodworks provided by Manufacturer over the lowest and second
wooden batten at an on-centre distance of 600mm. Install the Skirting of width 50mm or more as required Engineer-in-Charge and insert
the tongue end of the panel in the skirting.
Acoustical Fabric wall Panelling
Providing and supplying ‘Acoustical Wall Paneling’ with square edges made of fibre glass substrate 25mm thick and wrapped on the front
side with an acoustically transparent and classified for Fire reaction Class A, as per ASTM E-84, fabric with an option of colors – Husk,
Copper, Sangria, Sesame, Coffee, Charcoal, Titanium, Flame, Peanut and Shell as per the choice of size 600x600mm, 600x1200mm &
600x1800mm providing a minimum sound absorption level of 0.85 NRC to be affixed to wall using Wall panel Impalers supplied by
manufacturer Ceiling Solutions and construction adhesives as per the instructions laid down by the manufacturer. The works shall
complete in all respects as per manufactures specifications and direction of Engineer-in Charge.
120 128.75 Sqm 2,575.50 Hundred Seventy
Five and Fifty Paise
3/4/5 nos. wall panel Impalers of shall be fixed to the wall surface using self-tapping screws. Silica based construction adhesive to be
dabbed on to the projecting elements (spikes) of the impalers. wall panels shall be pierced through the spikes of the impalers ensuring
the line and level of the panels are maintained. Installation to be carried out by Trained Installation team or equivalent & Installation
should be carried out as per
Manufacture's recommended procedure. makeArmstrong or equivalent make
Schedule B Page 27 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
Providing and fixing partition as per design drawing, cladded with first quality 12mm thk. cement sheet, using first quality hardware.
made of 2 MM thick Aluminium tube frame The sections are placed @ 600 x 600 MM C/C both ways and additionally at openings or ends
as required. Sections are joined by Aluminium angle cleats and the frame is fixed to wall, floor with suitable aluminium angles and
fastened with steel screws.Frame size 50 x 50 MM with 12 MM thick cement sheet. partition work should be carried out as per detail
121 3,698.12 Sqm 918.09 Hundred Eighteen
drawings and as per the instructions given by the architect. Rate of partition shall be inclusive of out in order to execute the aforesaid
and Nine Paise Only
item to the satisfaction of the architect / EIC. The rate shall be for complete item inclusive of all material, labor, wastages, necessary tools
& tackles, adhesives, consumable hardware.
Basement Raft Waterproofing
All surfaces shall be free from oil, grease, friable matter, and general curing compounds. Concrete surfaces shall be cleaned using high
pressure water jetting, grinding or other methods approved by the Engineer/ as recommended by manufacturer,
Any visible cracks, honeycombs need to be treated with E polymer modified Repair mortar (using Planicrete SBR with Cement:Sand -1:3
or Mapegrout T60) from MAPEI Range.
Supplying and installing positive side waterproofing treatment for “Below Raft Slab’’ by using a pre – applied, flexible 1.2mm thick fully
bonded self adhering, sanded HDPE sheet membrane Mapeproof ALS AP. The fully bonded HDPE sheet membrane shall consist of a thick
122 3,404.37 Sqm 1,479.65 Hundred Seventy
white HDPE film, a highly aggressive pressure sensitive adhesive and weather resisting coating which bonds integrally to poured concrete
Nine and Sixty Five
of base slab. An intimate bond is formed to the poured in-situ structural concrete by means of a pressure sensitive adhesive preventing
lateral water and moisture migration between the membrane and structure. The HDPE Sheets are overlapped to a min. of 75mm using
double side adhesive tape Mapeproof ALS D10 AP along breadth and inbuilt adhesive strip along the length of the membrane. The fully
bonded HDPE Sheet waterproofing membrane shall have the properties such as Resist hydrostatic pressure of upto 70m head of water,
Puncture resistance of ≥1100 N (as per ASTM E154), Elongation of ≥700%; Tensile strength of ≥21 N/mm²; peel adhesion to concrete ≥
Schedule B Page 28 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
Terrace Waterproofing
Surface Preparation for waterproofing: Cleaning and preparation of surface with the help of wire brush or grinder. Cleaning by air blower,
crack filling etc, complete. Wrapping all pipes inserts with a two way adhesion tape of make Dr. Fixit Bathseal tape and grouting the gaps
space between the slab & parapet wall, grout the pipe gaps with non-shrink grout Dr. Fixit Pidigrout 10M or by preparing polymer
modified mortar with Dr. Fixit Pidicrete URP in the ratio of 1:3 by adding polymer 10% by weight of the cement.
Angel Fillet: Providing 50 mm X 50 mm angle fillets on the vertical up-stands, parapet wall junction corners, service units and properly
dressed by preparing polymer modified mortar with Dr. Fixit Pidicrete URP in the ratio of 1:3 by adding polymer 10% by weight of the
Waterproofing: Supplying & applying 2 coats of pre packed 2 component cementitious waterproof coating, Dr. Fixit Fastflex, with a mix
ratio of (liquid: Powder), parts by wt. - 1:1.4, in the slab areas & extending it to the wall up to 300mm height above FFL. This includes lying
Hundred Fifty One
123 3,443.30 of a 150mm wide strip of an open woven glass fiber mesh over the angle fillets on the 1st coat while it is still wet. The coverage shall be Sqm 351.56
and Fifty Six Paise
min. 2 Kg/sq.mt in 2 coats, self-curing for 4 days, thereafter ponding the floor area for 2 days, including proper surface preparation as per
manufacturers' recommendation, filling cracks with polymer modified mortar using SBR Latex, Pidicrete URP, all the honeycombed areas
shall be identified and injected with cement slurry admixed with expansive additive, Pidicrete AM @ 225gms per bag of cement. Making
of angle fillets all around the periphery of the wall with polymer modified mortar using SBR Latex, Pidicrete URP. The waterproofing
material shall conform to HDB specification & AS/NZS 4858:2004, Class Il having Elongation at break > 120% as per ASTM D 412, Tensile
strength > 1 N/mm2 as per ASTM D 412, Adhesion strength : 0.8 N/mm2 as per ASTM D 4541, crack bridging up to 2mm as per ASTM C
836, Water penetration (5 bar pressure): 1% as per BS EN 12390, Hardness, Shore A: 60 as per ASTM D 2240, RCPT permeability : 92% as
per ASTM C 1202-97 etc, complete.
Providing and laying IPS cement concrete flooring of mix 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate of 20mm nominal size) Rupees One
in a single layer, including mixing, laying, compacting, and finishing the surface with a floating coat of neat cement, with a slope as Thousand Four
124 2,832.50 required for proper drainage. The work includes adding a waterproofing compound as per the manufacturer’s specifications to enhance Sqm 1,458.47 Hundred Fifty Eight
the water resistance of the flooring. The thickness of the IPS flooring shall be between 50mm to 75mm. and Forty Seven
Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection >
and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1
Hundred Seventy
125 894.05 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing Sqm 779.70
Nine and Seventy
of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner.
Providing & laying china mosaic flooring of approvd make for plain and curved surfaces at floor, dado, otta etc. comprising of 20 to
mm size broken pieces of ceramic/ glazed tiles (only white colour) laid over 1:6 cement mortar bedding including applying cement slurry
at the rate of 2.75 kg per Sq.m. on plain or sloped surfaces and filling joints with white cement. The flooring/ dado shall be tampered with
wooden rammer not exceeding 2 Kg in weight to bring the mortar up to the surface including rounding of the junctions and extending
them upto 15 cm along the parapet wall. The rate shall include any type of bands, vata, any colour, any pattern or design as per drawing,
curing, cleaning with water and oxalic acid etc. complete as sample approved by Architect/ EIC. (Only plan area shall be measured
Rupees Twenty Four
including vata upto 150mm height). Rates should be inclusive of acid washing and vata.
126 2,002.33 Sqm 24.28 and Twenty Eight
'All the waterproofing activities shall be carried out by in-house application company of the principal material manufacturer and provide
a written corporate Supply Apply Corporate Warranty from the principal manufacturer that all work executed will be free from defects in
materials, workmanship and free of leaks for a period of 10 years from the date of Work Completion, unless resulting from structural
defects or causes other than the work of this section. Said defects shall be remedied by the principal manufacturer for the period of the
warranty without additional cost to the owner for waterproofing material only.
Schedule B Page 29 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
Providing cement vata (10 cm x 10 cm size) quarter round in cement mortar 1:1 including neat cement finishing, watering etc. Rupees Forty Five
127 2,002.33 complete.For all floor Rmt. 45.83 and Eighty Three
Providing throating or plaster drip and moulding to R.C.C. Chhajja. Rupees One
128 496.37 Rmt. 1,153.42 Hundred Fifty Three
and Forty Two Paise
Providing plinth protection to building including excavation in oridnary soil and laying cement concrete (0.10 mt thk)1 : 5: 10 using Stone
aggregates of 20 mm nominal size in foundation Layer and above on brick masonry 1:6 and above on PCC providing Cement Cocrete 1:2:4
129 314.83 (0.10 mt thk)(1 Cement : 2 Coarse Sand : 4 Stone Aggregrate 20 mm nominal size) coping on top including Broom finishing (plaster 10 mm Sqm 3,339.06
Hundred Thirty Nine
)wiht Square line(0.20 X 0.20) marking on Top and Side )and curing etc complete only top area should be measured.etc., complete all as
and Six Paise Only
directed by Engineer-in-Charge.
Supplying and fixing Stainless steel hand Railing of Grade 304 (14 gauge thick sections) with glossy finish consisting of 38 NB or nearest
size vertical posts 1200 Heigh at maximum spacing @ 500 mm c/c with suitable cups at bottom and top rail of 50 NB or nearest size &
intermediate rails 4 nos of 25 NB or nearest size etc complete at all levels including bending to required profile. Tungsten insert gas
130 448.98 Rmt 1,895.77 Hundred Ninety Five
welding & all required accessories,grinding & labour etc complete as per design fixing with base slab/concrete or side wall/RCC by
and Seventy Seven
suitable fastenre and plates as per Drawing and instruction of Engineer-in-Charge. .(work for all floors)
Fabricating, supplying and fixing in position S S daso wall mounted railing for Ramp, staircase and balcony with brush finish and 304 grade
as per indian standard and detailed drawing including grinding, cleaning and welded spots with S S finish. (Only length will be paid for
131 281.50 payment) 50 mm NB 14 gaugehandrail mounted on wall top rail and 38 mm NB 14 gauge wall brackets support on wall @ 1M C/C, 50mm Rmt. 1,700.84
Hundred and Eighty
dia x 6mm thk plate, anchor fastner, machine srew, errecting and positiongrouting to be fixed / installed etc complete as per detailed
Four Paise Only
drawing etc comp. (work for all floors)
Providing & fixing of roof with multilayer standing seam polycarbonate panel system of 18mm thickness (minimum) including all standard
fixing accessories on top of the supporting structure (Paid extra in another item) complete & as per the direction of the engineer in
charge. The panels should work on angular daylighting concept with translucent and opaque combination of louvers inside, for better
thermal insulations and diffusion of light especially with white and clear combination designed for tropical regions & shading throughout
the day for better ambient temperature below the roof. Panels shall have a minimum seven layers with all fixing accessories to ensure
best performance for wind uplift, vibration, oil canning and visual appearance. The entire panel system shall be with a width from min.
1200 mm. Bigger width and minimal junctions should be preferred for better performance. Panels shall be manufactured with vertical
offset standing seam at both sides of the panel. Panels have to be fixed on Purlin with snap on connectors with grip lock double tooth Rupees One
locking mechanism and will be secured on MS structure / purlins (will be paid Separately) with HDSS Fastener and double tooth Hundred Thirty One
polycarbonate connector for best stability and having a pull-out load of min. 7000N (7KN) tested as per ISO 6892:1998 and IS 1608: 2005. and Eighty Three
Panels cell structure be in truss bridge design or commonly called X structure for better strength and stability.Panels must satisfy Dart Paise Only
drop impact test as per IS 14443-97 shall show no sign of breakage on Polycarbonate Panel which have been exposed to UV for a min. of
500 Hours as per ASTM G 155. Panels shall not have Yellowness Index as per ASTM D 1925 of 15 units when tested on a sample exposed
to UV for 500 Hours as per ASTM G 155. U value shall not be more than 2.0 W/m2K as per EN ISO 10077-2:2018. Panel shall be with
additional End cap/Aluminium U/F profile/ Glazing Bar (all mill finish) for ends as required. Trained and factory authorized labour with
supervision to complete the entire panel installation as per drawing & direction of the engineering in charge.
Schedule B Page 30 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
Providing, fabricating, assembling, hoisting/ erecting and fixing in position at any heights/ any levels/ all floors/ all shapes & sizes with all
leads & lifts using MS Rolled Steel Sections, Hollow sections, Tubular Sections, MS Plates, Chequered Plates, MS Pipes, Perforated Sheet,
Flats, Bright Bars, Angles, MS Sheet, Girder, Beam. threaded J bolts, insert plate, support plate etc as per drawing. all confirming to latest
relevant IS codes for the work of steel structures like staircases, railings, handrail, jali, gates, grills, bracings, platforms, brackets, monkey
ladder, cattle trap, grill door, pipe rack, rungs, false ceiling frame work, framing for facade, Roof canopy, fencing posts, M.S. Screen &
fencing jali frame work etc. including straightening, cutting, bending, bolting and welding the members all as per structural drawings and
as per detailed specifications (for materials & workmanship) including necessary scaffolding/ staging etc. complete in the situations
described hereinafter and comprising of : i) Profile Cutting of components to required length/ width and shape/profile; ii) Smooth
grinding/ machining of edges/ faces/ all welding joints; iii) Necessary welding (electric arc welding) for required weld lengths and sizes.
Fabrication shall be in a perfect architectural workmanship manner and as provided in section V & VI of IS 800 & IS 7215. Welding shall be
carried out by qualified welders/ fabricators. The procedure, selection, test and inspection shall confirm to provisions in IS 816, IS 818, IS
133 191.87 Kg. 1,305.81 Hundred Five and
822, & IS 823. Erection/ hoisting shall commence only after passing of fabricated parts by Architect/ Engineer. Rate shall be inclusive of
Eighty One Paise
cutting, wastage, welding, bending (shop at site), bolting wherever necessary, grinding, finishing edges, filling & finishing the welded
spots & gaps with "Bombay Masala" & "Steel Putty" etc. complete. It should also include the cost of necessary scaffolding/ staging, zinc
coated nut-bolt as required for safety, anchore fastner of approved make ( Hilti Fisher or equivalent) structural stability of all works at site
and for fixing with RCC element. Including, Providing and applying minimum two coats of epoxy paint (2 coats of zinc chromate yellow
epoxy primer and 2 coats of epoxy paint) of approved make on all type of MS sections, new steel and other metal surfaces & including
preparing the surface to give an even shade & finish at any heights, any levels etc. complete as per satisfaction of engineer-in-charge.
(Only standard measurements will be paid for as actual cut length used at site)
Providing and fixing roofing consist of 0.8 mm thick galvanized steel deck sheet confirming to IS 277:1992 used as permanent shuttering
over which MS wire mesh 3mm laid at 100x100 mm grid including edge trim covered with concrete. This metal deck will be supported on
134 9,897.32 Sqmt. 959.50 Hundred Fifty Nine
structural steel beam with shear studs. (Structural steel like Beam, column, joists etc. & concrete of different grade as per design will be
and Fifty Paise Only
paid separately).
Providing and fixing Mineral fibre tiled false ceiling of size (600x600)mm in true horizontal level suspended on inter locking metal grid of
hot dipped galvanized steel sections. It consists of main "T" runner of size 24x32x0.3x3600mm, cross "T" of size 24x25x0.3x1200mm,
secondary cross "T" of size 24x25x0.3x600mm and PPGI wall angle of size 24x24x0.4x3000mm. Bottom exposed capping of width 24 mm
of all T-sections shall be of 0.25mm thick PPGI. PPGI wall angle 24x24x0.4x3000mm {Material-GI(IS513), YS-280Mpa, Finish-Galvanised
90GSM (IS277)} is fixed along the perimeter of the ceiling to Walls, partitions or columns etc., with wooden screws at 300mm centers or
Hilti HPS 6x40mm placed at 600 mm c/c. soffit cleat 27x37x25x1.6mm {GI(IS513) YS-260Mpa, Finish-Galvanised 120GSM (IS277)} is fixed
with Rawl Plug- Ø8x45mm {Material-IS 513 CR1 grade, Zinc coating (7 to 8 microns) pull out load- 6.8kN for M30 concrete grade} creating
(1200x1200)mm grid. Main-T runners 24x32x0.3x3600mm are then suspended at 1200mm c/c from ceiling using 4mm zinc electroplated
butterfly level clips of size 85x30x0.8mm spaced at maximum 1200mm center to center along main T and not more than 150mm from
135 985.50 Sqmt. 1,779.96 Hundred Seventy
spliced joints. The last hanger at the end of each main runner should not be greater than 600mm from the adjacent wall.
Nine and Ninety Six
24x25x0.3x1200mm cross T {Material- GI(IS513),YS-280Mpa, Finish-Galvanised 90GSM (IS277)} is interlocked between the main T at
600mm center to center to form a grid of 1200x600 mm and then secondary cross “T" 24x25x0.3x600mm {Material-GI(IS513), YS-280Mpa,
Finish-Galvanised 90GSM(IS277)} is then interlocked at middle of the (1200x600)mm grid to form grids of (600x600)mm. Cross Tees at the
ends having length more than 600mm are to be supported independently. Finally 9.5mm thick square edge, Biocidal PVC laminated tile of
size 595x595mm,which is an anti-microbial ceiling tile with upto 99.9% kill rate in 24 hours against common bacteria & fungi, suitable for
highest level of health & hygienic applications & comes with ISO5 feature is placed in the grid.
Schedule B Page 31 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
Providing and fixing Perforated Metal tiled false ceiling of size (600x600mm/150mm Width Linear) in true horizontal level suspended on
inter locking Micro metal grid of hot dipped galvanized steel sections. It consists of main "T" runner of size 14x32x0.3x3600mm, cross "T"
of size 14x32x0.3x1200mm, secondary cross "T" of size 14x32x0.3x600mm and PPGI wall angle of size 14x19x0.4x3000mm. Bottom
exposed capping of width 14 mm of all T-sections shall be of 0.25mm thick PPGI. PPGI wall angle 14x19x0.4x3000mm {Material-
GI(IS513),YS-280Mpa,Galvanised 90GSM(IS277),Finish-painted 25 micron top side,10 micron backside,)} is fixed along the perimeter of the
ceiling to walls, partitions or columns etc., with wooden screws at 300mm centers or Hilti HPS 6 x40mm placed at 600 mm c/c. soffit cleat
27x37x25x1.6mm {GI(IS513)YS-260Mpa,Finish-Galvanised 120GSM(IS277) } is fixed with Rawl Plug- Ø8x45mm {Material-IS 513 CR2 grade,
Zinc coating (7 to 8 microns) pull out load- 6.8kN for M30 concrete grade} creating 1200mm x 1200mm grid. Main-T runners
14x32x0.3x3600mm {GI(IS513)YS-280Mpa,Finish-Galvanised 120GSM (IS277) are then suspended at 1200mm c/c from ceiling using 4mm
zinc electroplated butterfly level clips of size 85x30x0.8mm spaced at maximum 1200mm center to center along main T and not more
136 128.75 Sqmt. 1,674.15 Hundred Seventy
than 150mm from spliced joints. The last hanger at the end of each main runner should not be greater than 600mm from the adjacent
Four and Fifteen
wall. 14x32x0.3x1200mm cross T {GI(IS513)YS- 280Mpa,Finish-Galvanised 120GSM(IS277) } is interlocked between the main T at 600mm
center to center to form a grid of 1200x600 mm and then secondary cross “T" 14x32x0.3x600mm {GI(IS513)YS-280Mpa,Finish-Galvanised
120GSM(IS277) } is then interlocked at middle of the 1200x600mm grid to form grids of 600x600mm. Cross Tees at the ends having length
more than 600mm are to be supported independently. Finally T-15, Reveal edge powder coated perforated metal tiles of size
(595x595)mm having 60-65 micron powder coating on face side, 9.5mm drop and overall thickness 0.5mm, made of galvanized iron
(120GSM galvanizing), NRC≥0.5 with an open area of >18% with diagonal perforations of 1.8mm diameter @ pitch of 2.5mm in
(557x557)mm area & backed by black coloured acoustic fleece, is placed in the grid. Passages & Other Locations
Providing and fixing eco-friendly light weight calcium silicate false ceiling tiles having Tegular edge & 15 mm Thick Densified edges on the
Tile Periphery for Extra Strength The Light weight calcium silicate ceiling tiles shall have , light reflection 85% non-combustible as per B.S.
476 part IV, 100% humidity resistance and also having thermal conductivity0.043° w/m KC.for the best thermal Insulation . The Light
weight calcium Silicate tile shall be of approved texture Fine fissured/ Spintone/Cosmos / Plain with water based paint Globe having NRC
value of 0.75 NRC or equivalent of size 595 X 595 mm to be laid on true horizontal level suspended inter locking metal grid of hot dipped
galvanized steel sections (galvanizing @120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to
get required length and size of 24X38mm made from 0.30 mm thick (minimum) sheet, 1200mm centre to centre, and cross ‘T’ of size
24X28mm made out of 0.33mm (Minimum) sheet spaced 1200mm along spaced between main ‘T’ at 600mm centre to centre to form
agrid of 1200X600mm and secondary cross ’T’ of length 600mm and size 24x28mm made of 0.30 mm thick (Minimum) sheet to be
interlocked at middle of the 1200X600mm panel to form grid of size 600X600mm resting on periphery walls/partitions on a perimeter
Rupees Six Hundred
wall angle pre-coated steel of size (24X24X3000mm made of 0.40mm thick (minimum) sheet with the help of rawl plugs at 450mm centre
137 11,004.65 Sqmt. 606.95 Six and Ninety Five
to centre with 25mm long dry wall screws @ 230mm interval and laying 15mm thick Densified edges light weight calcium silicate ceiling
tiles of approved texture (Fine Fissured/Cosmos/Spintone / Plain) in the grid including, cutting /making opening for services like diffusers,
grills, light fittings, fixtures, smoke detectors etc., wherever required, Main ‘T’ runners to be suspended from ceiling using G.I. slotted
cleats of size 25X35X1.6mm fixed to ceiling with 12.5mm dia and 50mm long dash fasteners, 4mm G.I. adjustable rods with galvanized
steel level clips of size 85X30X0.8mm, spaced at 1200mm centre to centre long main ‘T’ bottom exposed with 24mm of all T-sections shall
be pre-painted with polyester baked paint, for all heights, as per specifications, drawings and as directed by engineer-in-charge.Note:-
Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/opening (cut
outs) having area less than 0.30 sqm. The calcium silicate ceiling tiles shall have NRC. Value of 0.50 (Minimum) for Fine
fissured/Spintone/Cosmos and 0.75 NRC for Globe, light reflection 85% non-combustible as per B.S. 476 part IV, 100% humidity resistance
and also having thermal conductivity. 0.043° w/m KC.for the best thermal Insulation. (work for all floors)
Schedule B Page 32 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
Providing and fixing Water proof gypsum board false ceiling consists at G.I perimeter channels of size 0.55 thick having one flange of
mm and another flange of 30 mm and web of 27 mm along with perimeter of ceiling, screws fixed to brick work / concrete / partition with
help of nylon sleeves and screws at610 mm centre. The suspending G.I. intermediate channels of size 45 mm(0.9 mm thick with 2 flangs at
15mm each from the soffit at 1220 mm centrewith ceiling angles of width 25mm x 10mm x 0.5 mm thick fixed to soffit withG. I cleat and
steel expansion fastners ceiling section of .55 thick having kurled web 51.5 mm and 2 flangs at 26 mm each with lip at 10.5 mm are fixed
to intermediate channel with help of connecting clips and in direction perpendicular to the intermediate channel at 450mm centre to
centre including 12.5 mm tapered edge Gyp board conforming to IS 2095 – 1982 is then screw fixed to ceiling section with 25mm dry wall
screws of approved quality and make at 230mm centre, screw fixing is done mechanically with drilling machine with suitable attachment.
138 350.54 Sqmt. 3,851.69 Hundred Fifty One
Finally tapered edges at the cupboard are to be joint and finished so as to have a flush look which includes filling and finishing with
and Sixty Nine Paise
jointing compound, paper tape etc. complete. Rate to be included all kinds of profiles, upright , periphery Borders of Other ceiling,
curves,cutouts required for light fixtures, speakers, sprinklers, smoke detectors, trap doors, A.C. grill, diffuser etc including additional
support if required of duct portion, marking grid on ceiling, including all drops, offsets, curvature small moulding and in desired
geometrical pattern, including 2 coats of primer, plaster putty and minimum 3 coats of plastic Emulsion paint as per manufactures
specification, scaffolding. (Same Rate should apply for upto 300 mm Wide Gypsum ceiling Patta)
Providing and fixing in veneer ceiling on framework made in 2" x 2" thick sal wood sections, placed at 2'-0" c/c in both the directions as
per detail drawing. The framework shall be claded with 12mm thick plywood and finished in veneer with matching timber lipping to
139 70.74 Sqmt. 5,162.13 Hundred Sixty Two
shape and size as per the detail drawings. All the exposed wooden and veneer surfaces shall be stained to shade as directed by Architects
and Thirteen Paise
and polished melamine. Kindly note only elevation area measurement shall be considered excluding internal and external the boxing
thickness for the payment.
Providing and fixing of approved make Trap door with galvanised steel.Doors should be finished in Powder Coating with film thickness of Rupees One
60 microns approx. in desired RAL Shades. The manufacturer company must be TUV Nord ISO 9001-2015 certified trap door and must be Thousand Six
140 2,613.65 made from galvanised steel sheet. door must be concealed type of hinges and appropriate provision for hanging from celling. appropriate Sqmt. 1,667.51 Hundred Sixty Seven
locking must be provided.frame and door must made from minimum 1 mm glavanised steel. and Fifty One Paise
Carpet for lecture hall Flooring with Wooden Skirting and Wooden bidding :
Providing and Fixing of Harmony 850 gsm quality scroll high/low construction loop pile 46% polypropylene BCF – 54% PP cable yarn
carpet. Tri colour solution dyed yarn, Woven Polypropylene Primary backing and secondary backing Action Bac carpet gauge 1/10” in the Rupees Five
width of 12’. Density factor 1, 57,600 tuft/smt, Carpet flammability certification (ASTM D 2859-96 &CPSC-FF-170) 8 Passes with static Thousand Three
141 87.01 generation under 3 KV. The carpet has to be fixed with 8mm amour underlay and with solution of Fevicol SR505 grade. The measurement Sqmt. 5,398.45 Hundred Ninety
will be counted in square meters of flooring with Wooden skirting and payment will be made on actual quantity installed. If found un Eight and Forty Five
level flooring leveled it by white cement or cement mortar bedding of 12 mm. thick in C.M. 1 : 3. The mortar shall have sufficient plasticity Paise Only
for laying and there shall be no hard lumps that would interfere with the evenness of bedding. The base shall be cleared and well wetted.
'Providing and fixing of approved make Single skin Shaft door with frame with galvanised steel. Doors should be finished in Powder
Coating with film thickness of 60 microns approx. in desired RAL Shades. The manufacturer company must be ISO 9001-2015 certified trap
door and must be made from galvanised steel sheet. door must be concealed type of hinges and appropriate provision for all four side
wilded door frame. with appropriate shaft door locking must be provided. acodor Frame size 50 X 30 mm from 1.2 mm Galavanised sheet
142 618.00 Sqmt. 757.50 Hundred Fifty Seven
and door must made from minimum 1 mm glavanised steel with or without vission panel with necessory steel stifner.
and Fifty Paise Only
Hinge: Concealed Type
Lock : alnkey type lock
Finish: Powder coated color finish as per RAL color
Schedule B Page 33 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
The system fixed to brick wall at the corner from finished floor level. Adjustable end cap. High impact vinyl acrylic snap-on matt finished..
The corner guard must be 50 mm * 50 mm , as specified by the client in size with aluminum retainer and rigid vinyl, must have 1.5 mm Rupees Three
143 213.60 thick aluminum retainer, must have 2 mm thick scratch and stain resistance rigid vinyl cover, should be coated with antifungal and Rmt 3,012.06 Thousand Twelve
antibacterial chemical. the system shall be designed to withstand impact. making it ideal for areas like high traffic corridors and corners. and Six Paise Only
the vinyl cover should be fire retardant according to the norms and should have test certificates of that.
Providing and Fixing ABS Plastic SPEED BUMP of Size :- 750 MM x 250MM x75 MM, Per Mtr # 4 Nos (2 black, 2 yellow),TOP DESIGN – LINE Rupees Seventy Five
144 15,449.40 DESIGN ANTI SKID PATTERN FOR GRIP fililing CEMENT INSIDE etc. complete as directed by Engineer-in-charge. Rmt 75.75 and Seventy Five
SIGNAGES HANGING FROM CEILING- Providing, Fabricating & Fixing signage's using 304 grade Stainless steel 1.5 mm thick brushed
steel finish plate (2 nos) with 8mm thk. Acrylic sheet covered with vinyl of approved colour, sandwiched between two S.S plate and fixed
with s.s struds . Sandwiched plates should be fixed in 12mm X 12mm S.S 1.5mm thk.304 grade frame and punched (laser cut) lettering
145 9.92 Sq.inch 1,111.00 Thousand One
carried out on both the s.s plates of required size and text as directed by Engineer and hanged to ceiling with the help of S.S 8mm thick
Hundred Eleven Only
chain at both ends with making all the fixing arrangement to the ceiling and to the plate etc. complete as directed by Engineer-in-charge.
Providing and fixing 5 mm thick PVC sheets as Signage and Display of health signs/information of required size having retro reflective Rupees Three
letters/design as per requirement, fixing the same through approved adhesive etc. complete work shall e carried out as per instruction of Thousand Two
Engineer-in-charge (Approved make PVC foamed sheet only) (work for all the floors) Hundred Thirty Two
Supply and Installation of CONVEX MIRROR (ABS Plastic and mirror made of back frame made of unbreakable polycarbondate) - 32'' Inch Rupees One
(800mm) Fitting with wall mount kit, Per Kit 4 Holes Bolt Size - 6 x 50 Jarsi Bolt Hundred Sixty Six
and Sixty Five Paise
Supply and Installation of 3M ROAD STUD/CAT EYE REFLECTOR. Fitting with chemical & bolting, Per Pic 1 Holes & 6mm x 50mm bolt. Rupees Fifty Five
148 721.00 No. 55.55 and Fifty Five Paise
Supply and Installation of YELLOW PAINT Demarcating Patta for Vehicle Parking (Oil Paint with primer) with materials & Labour Cost.
Good Company Colour Paint & Primer should be used. Approval for Client is Required on colour paint & primer Make. Width 150mm
149 80.00 Rmt 959.50 Hundred Fifty Nine
Standard size, Car Size 15 x 7.5ft, Two wheelar Size 7 x 2.5/3ft. 1Coat Primer , 2 Coat Paint)
and Fifty Paise Only
Supply and Installation of CAR STOPPER WITH HOLE TYPE (L)500mm x (H)160mm x (W)150mm Fitting with Epoxy, 12mm X 150L MS Bolt Rupees One
with crome, Per Pic three holes. Thousand Nine
150 1,369.71 No. 1,939.54 Hundred Thirty Nine
and Fifty Four Paise
Schedule B Page 34 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
Providing & Fixing roller blinds, must be comprising 100% polyester. The fabric must be woven and coated blackout fabric, weight
GSM (+/- 10%), width 3.0mtr thickness 0.42mm (+/- 0.05mm). Light Fastness must be of 5 to 6 grade. The roller mechanism to be
operated with control unit is made of high strength ABS plastic with ultra spring smooth system. The mechanism shall be operating with
the use of a ball chain. As per requirement, there should be an option of left or right control. The ball chain should be made up of
unbreakable polythene plastic , 1.50mm polyester cord with 4.5mm ball. he blind should be able to be stopped at any desired position
with the help of a stop lock. Chain jointer is used to secure the chain. The roller tube extruded by non rusting Aluminum alloy with grade
(6063T) with 1.5 mm thickness. The Channel is designed with support beam to keep it straight and shall have a pocket for holding the
fabrics in position. Available in 32, 38 & 45 mm diameters for small and big blind respectively. The mounting brackets should be universal
and must be capable of mounting inside / outside / ceiling / wall with the clutch on either the right or left end of the tube. The Brackets
151 169.02 Smt 2,979.50 Hundred Seventy
are made of Mild Steel with the grad (DD) and are powder coated for a greater finish. Brackets shall be accommodating overhead or side
Nine and Fifty Paise
mounting with clutch assembly on either end of the blind. Including 50 X 25 X 2 mm thick anodized aluminum section inserted with same
size of teak wood in it for mounting .The roller tube on existing aluminum section to maintain curtain width of 1200 mm. The Bottom
Channel of Roller Blind must be of matching shade with fabric and in Pentagon shape, made of none rusting Aluminum powder coated
with 1.50 mm thickness. The fabric shall be enclosed in the suitably created pocket along with tube. The channel shall be closed from
sides with the end caps to give a neat look. Operational action shall be smooth and upto the satisfaction of the Architects. The maximum
curtain width shall be 1200 mm. The payment will be made on completion of the work per Sq.mt.
Providing, Supplying and Fixing Zebra Roller Blinds (Day & Night Blinds) of approved make, comprising premium quality alternating
opaque and sheer polyester fabric with a smooth manual chain-operated roller mechanism, powder-coated aluminium headrail, bottom
rail, brackets, side covers, and all other necessary accessories. The blinds shall be custom-fabricated to suit the window opening sizes as
per approved drawings and installed complete in all respects, including fixing hardware, transportation, labour, alignment, testing, and
152 665.45 Smt 2,382.59 Hundred Eighty Two
commissioning for smooth operation. The fabric colour, shade, and pattern shall be as approved by the Engineer-in-Charge/Architect. The
and Fifty Nine Paise
item rate shall include the cost of all materials, accessories, wastage, tools, labour, and complete installation. The material specification,
make, and shade shall be approved by the Engineer-in-Charge (EIC) prior to installation.
Supplying and Installing of SL-4 type 84R Aluminium 0.65mm TCT Plain Exterior Grade Powder Coating of Panels and Back side Framming
Rupees Sixty and
153 21,104.36 G.S. Black Exterior Louvre System. Including louvre Door etc. All ISI marked Stainless Steel coted butt hinges with necessary screws, Smt 60.60
Sixty Paise Only
Handle, Lock , Door Stopper. complete as directed by Engineer-in-charge.
Providing & Laying polypropylene Flutted corrugated Floor Protector Sheets used for Floor Protection of Vitrified Tile etc. Complete. Rupees One
without damage of tiles including neat and clean of flooring & including loading, lifting,transporting, and disposal of debries outside of Hundred Twenty
plot boundry et. complete with all leads & lift. etc completed as directed by E.T.C/PMC . Nine and Ninety
Nine Paise Only
Making holes upto 16mm dia. in masonry by hammer drilling machine including disposing the debries.
155 170.00 No. 131.10 Hundred Thirty One
and Ten Paise Only
Making holes upto 22mm dia. in masonry by hammer drilling machine including disposing the debries.
156 36.00 No. 415.51 Hundred Fifteen and
Fifty One Paise Only
Making holes upto 52mm dia. in any RCC members by diamond Core Cutting machine including disposing the debries. and Including Rupees Four
EPOXY based water proofing compound for sealing the joints around the pipes, nominal reinforcement wherever required,scaffolding Hundred Sixty Two
and labour charges for working at all levels ,leads and heights and Eighteen Paise
Schedule B Page 35 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
Making holes upto 75mm dia. in any RCC members by diamond Core Cutting machine including disposing the debries. Upto 750. Depth Rupees Five
and Including EPOXY based water proofing compound for sealing the joints around the pipes, nominal reinforcement wherever Hundred Fifty Four
required,scaffolding and labour charges for working at all levels ,leads and heights and Thirty Nine Paise
Making holes upto 102mm dia. in any RCC members by diamond Core Cutting machine including disposing the debries. Upto 750. Depth
Rupees Six Hundred
and Including EPOXY based water proofing compound for sealing the joints around the pipes, nominal reinforcement wherever
159 16.00 No. 646.60 Forty Six and Sixty
required,scaffolding and labour charges for working at all levels ,leads and heights
Making holes upto 125mm dia. in any RCC members by diamond Core Cutting machine including disposing the debries. Upto 750. Depth Rupees Seven
and Including EPOXY based water proofing compound for sealing the joints around the pipes, nominal reinforcement wherever Hundred Thirty Eight
required,scaffolding and labour charges for working at all levels ,leads and heights and Eighty Two Paise
Making holes upto 152mm dia. in any RCC members by diamond Core Cutting machine including disposing the debries. Upto 750. Depth Rupees One
and Including EPOXY based water proofing compound for sealing the joints around the pipes, nominal reinforcement wherever Thousand One
161 11.00 required,scaffolding and labour charges for working at all levels ,leads and heights No. 1,107.67 Hundred Seven and
Sixty Seven Paise
Making holes upto 200mm dia. in any RCC members by diamond Core Cutting machine including disposing the debries. Upto
Depthand Including EPOXY based water proofing compound for sealing the joints around the pipes, nominal reinforcement wherever
162 11.00 required,scaffolding and labour charges for working at all levels ,leads and heights No. 1,292.09
Hundred Ninety Two
and Nine Paise Only
Making holes upto 250mm dia. in any RCC members by diamond Core Cutting machine including disposing the debries. Upto 750. Depth Rupees One
and Including EPOXY based water proofing compound for sealing the joints around the pipes, nominal reinforcement wherever Thousand Nine
163 11.00 required,scaffolding and labour charges for working at all levels ,leads and heights No. 1,938.70 Hundred Thirty Eight
and Sixty Nine Paise
Making holes upto 300mm dia. in any RCC members by diamond Core Cutting machine including disposing the debries. Upto 750. Depth Rupees Nine
and Including EPOXY based water proofing compound for sealing the joints around the pipes, nominal reinforcement wherever Hundred Three and
required,scaffolding and labour charges for working at all levels ,leads and heights Ninety Nine Paise
Providing & laying avg 100 mm thick cement concrete flooring with concrete with hardener on top, under layer of cement concrete 1:2:4
(1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix
165 75.71 1:2 (1 cement hardener mix : 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of Smt 3,554.40
Hundred Fifty Four
cement or as per manufacture’s specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete.
and Forty Paise Only
Providing & fixing rolling shutters of approved make made of 80 mm. Wide M.S. laths inter locked together theit entire length and jointed Rupees Nine
together at the end locks mounted on specially designed pipe shaft with bracket plates, guide channels and out side locking with Hundred Thirty Four
mechanical gear operated device including the cost of Hood cover and spring including priming coat of red lead paint two coat of Oil and Twenty Five
paint .etc complete. Paise Only
Providing and fixing pre-cast Rubber moulded inter locking concrete block 80mm thick with grade of concrete M400 pnumatic
compressed by mechanically pressed and as per approved design including 75mm sand layer for levelling and filling the joint with sand in
167 540.75 Smt 705.12 Hundred Five and
proper line and level etc. complete and including cost of carting of debrises in out side of premises with all lead & lift as directed by
Twelve Paise Only
engineer in charge.(Alcock,Vyara or equivalent make).
Schedule B Page 36 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete block 60mm thick with grade of concrete M300 pnumatic Rupees Three
compressed / vibrated mechanically and as per approved design Confirming to IS 15658 : 2006 including 65 mm Sand layer for levelling Hundred Seventy
and filling the joint with sand in proper line and level as per guidlines of IRC : SP 63-2018 etc. Complete. Four and Ninety Two
Providing and fixing pre-cast concrete kerb stone of gray cement based concrete block 35cm length,30cm height and 15cm thick of M250 Rupees Two
grade concret as per approved design and including excavation for fixing in proper line and level,filling the joint with C:M 1:3 Thousand Eighty Five
(1cement:3fine sand) etc complete. and Sixty Five Paise
Providing and fixing high-grade signage consisting of 2 mm thick Stainless Steel (Grade 304) letters, featuring a bright mirror-polish finish
further protected by a premium PU paint coating to enhance durability and weather resistance. Letter heights range from 350 mm to
mm in English and/or Gujarati language. The item includes precision laser/water-jet cutting, secure mounting onto wall surfaces using
170 1,177.70 Each 280.45 Hundred Eighty and
stainless steel screws, nails, or concealed studs, and the provision of all necessary scaffolding, tools, and safety equipment for installation
Forty Five Paise Only
at any height, executed as per the approved design and instructions of the Engineer-in-charge.
Providing and Placing in position suitable PVC water stops conforming to IS:12200 for construction/ expansion joints between two RCC
members and fixed to the reinforcement with binding wire before pouring concrete etc. complete. a) Serrated with central bulb (225 mm
171 84.00 Rmt 212.10 Hundred Twelve and
wide, 8-11 mm thick)
Providing M.S. foot rests including fixing in manholes / UGT / OHT with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse Rupees Six
sand : 6 graded stone aggregate 20 mm nominal size) as per standard design : With 20x20 mm square bar Thousand Six
172 280.73 Nos. 6,676.27 Hundred Seventy Six
and Twenty Seven
Providing and fixing 'Unistone', Glass Reinforced Concrete (G.R.C) ornamental Screens casted with 'Spray Mix' concrete design in
approved size, pattern, thickness (Border 40-50mm thick & Internal Member 25-30mm thick) and shade. The Screens should be made
from ‘53 grade’ White Portland Cement manufactured by ‘JK Cement’ or 'Birla white', White Quartz fine graded seived Silica Sand, Alkali
Resistant Glass Fiber manufactured by 'NEG Japan, Owen Corning ‘Saint Gobain’ or equivalent, Super Plasticizers manufactured by
‘Karochem’ or equivalent, Polymers manufactured by ‘Nova Polychem’ or equivalent and U.V resistant Synthetic inorganic pigments
should be used for pigmentation manufactured by ‘Phenochem industries or equivalent. The Screens casting shall take place with
layering methodology using- Direct Power Spray machines.The GRC Screens flexural strength average L.O.P should be above or equivalent Rupees Seven
173 154.50 to 6 N/mm2 & M.O.R should be above or equivalent to 12 N/mm2 for tests done on 28 days cured samples. The fixing of Screens should SQ.MT. 706.14 Hundred Six and
be done using ‘Dry fixing’ method onto structural support members i.e. R.C.C, Brick work or Red oxide Primer -paint or Epoxy primer - Fourteen Paise Only
paint treated mild steel. The fixtures, fasteners and self tapping screws to be used for dry fixing should be of HP/KLIMAS. The quantity of
fasteners or self tapping screws shall be calculated in accordance to the weight of Screens and actual site fixing conditions. If there will be
requirement of Joint filling then Elastomeric exterior grade paintable PU Sealent will be used. For final finishing of Screen one weather
sheild exterior grade water based diluted paint coat will be done if required. Vendor shall submit shop drawings of same, the drawings to
be duly approved from Engineer in charge at site.
Providing & Executing 15 mm thick Washed stonecrete plaster on exterior walls including Water Repellent Coatings & vertical and
horizontal grouve specified by EIC. Any Size and Any Colour of stonechips will be finalised by Architect or EIC.
Hundred Eighty Two
and Six Paise Only
Schedule B Page 37 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
Providing and fixing in expansion joint 100 mm / 150 mm thick expansion joint board of best quality and approved make including cutting
to required size and shape at all levels etc. complete as directed.
175 91.53 Sq. Mt. 5,080.30 Thousand Eighty and
Thirty Paise Only
Providing and fixing of expansion joint system for floor gap 100 mm - 150 mm of approved make and manufactures for various roof
locations as per approved drawings and direction of Engineer-In-Charge. The joints shall be of extruded aluminum base members with,
self aligning and self centering arragement support plates asper ASTM B221-02. The system shall be such that it provides watertight roof
to roof/roof to corner joint cover expansion control system that is capable of accommodating multidirectional seismic movement without
stress to its components. System shall consist of metal profile that incorporates a universal aluminum base member designed to Rupees Five
accommodate various project conditions and roof treatments. The cover plate shall be designed of width and thickness required to satisfy Thousand Four
176 915.26 movement and loading requirements and secured to base members by utilizing manufacturer’s pre-engineered self-centering R Mt 5,425.61 Hundred Twenty
arrangement that freely rotates / moves in all directions. The Self centering arrangement shall exhibit circular sphere ends that lock and Five and Sixty One
slide inside the corresponding aluminum extrusion cavity to allow freedom of movement and flexure in all directions including vertical Paise Only
displacement. The Joint System shall resists damage or deterioration from the impact of falling ice, exposure to UV, airborne
contaminants and occasional foot traffic from maintenance personnel. Provision of Moisture Barrier Membrane in the Joint System to
have water tight joint is mandatory requirement. (Material shall confirm to ASTM 6063).
Providing and fixing of expansion joint system for floor gap 100mm - 150mm related with floor location as per drawings and direction of
Engineer-In-Charge. The joints system will be of extruded aluminum base members, self aligning / self centering arrangement and
support plates etc. as per ASTM B221-02. The system shall be such that it provides floor to floor /floor to wall expansion control system
for various vertical location in load application areas that accommodates multi directional seismic movement without stress to it’s
components. System shall consist of metal profiles with a universal aluminum base member designed to accommodate various project
conditions and finish floor treatments. The cover plate shall be designed of width and thickness required to satisfy projects movement Rupees Four
and loading requirements and secured to base members by utilizing manufacturer’s pre-engineered self-centering arrangement that Thousand Five
freely rotates / moves in all directions. The Self – centering arrangement shall exhibit circular sphere ends that lock and slide inside the Hundred Three and
corresponding aluminum extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. Eleven Paise Only
Provision of Moisture Barrier Membrane in the Joint System to have watertight joint is mandatory requirement all as per the
manufactures design and as approved by Engineer -in- Charge . (Material shall confirm to ASTM 6063.) Rate should be inslusive of
necessary scaffolding work, non shrink grout, RCC cutting, edge preparation etc complete.
Providing and fixing of expansion joint system for floor gap 100 mm - 150 mm related with wall joint (internal/ external) location as per
drawings and direction of Engineer-In- Charge. The joints shall be of extruded aluminum base members, self aligning / centering
arrangement and support plates as per ASTM B221- 02. The material shall be such that it provides an Expansion Joints System suitable for
vertical wall to wall/ wall to corner application, both new and existing construction in office Buildings & complexes with no slipping down
178 198.75 R Mt 11,654.90 Hundred Fifty Four
tendency amongst the components of the Joint System. The Joint System shall utilize light weight aluminum profiles exhibiting minimal
and Ninety Paise
exposed aluminum surfaces mechanically snap locking the multi cellular to facilitate movement. (Material shall confirm to ASTM 6063.)
Rate should be inslusive of necessary scaffolding work, non shrink grout, RCC cutting, edge preparation etc complete.
Schedule B Page 38 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
Fire Rated Door
'Providing and fixing of approved make 120mins Hollow metal fire rated doors with frame tested and certified design as per IS 3614 part-2
or BS 476 part-20 & 22 at NABL & CBRI Approved Laboratory (must be tested after 2021 with updated standard of 3614: 2021) for its
stability, integrity, and 30 min of insulation. Galvanized steel sheet to be used. Recommended fire door design should be similar to earlier
test evidence from CBRI with vision lite for a minimum fire rating of 2hrs with 30 min of insulation. Doors should be finished in Powder
Coating with a thickness of 60 microns approx. in desired RAL Shades. The manufacturer company must be ISO 9001-2015 certified. Door
frame is Single rebate profile of minimum size 120mm X 57mm with inbuilt groove gasket system Aco120 made out of 1.5mm minimum
thick galvanized steel sheet. 120x57 Frames shall be Mitered jointed and field assembled with mitred joint. The frames are finished with
Powder Coating in desired RAL Shade. Frame having provisions and necessary reinforcement for receiving appropriate hardware like lock
and hinges. Frames shall be mitered and field assembled with self tabs. All provisions should be mortised, drilled, and tapped for
Rupees Forty Five
receiving appropriate hardware. Door leaf shall be minimum 46mm thick fully flush double skin door with Round shape vision panel of
179 11.87 Smt 45,450.00 Thousand Four
300mm dia with tested evidence from CBRI. Door leaf shall be manufactured from 1.2 mm thick galvanized steel sheet. The internal
Hundred Fifty Only
construction of the door should be rigid reinforcement pads for receiving appropriate hardware. The infill material shall be honeycomb
craft paper. All fire rated doors shall be factory prepped for receiving appropriate hardware and provided with necessary reinforcement.
The edges should be interlocked with a bending radius of 1.4mm. For pair of doors, astragals have to be provided on the meeting stile for
both active and inactive leaf. Vision lite wherever applicable should be provided as per manufacturer's recommendation and desired to
be fixed with 'Z' clipping on system. including Hardware: 1) SS Ball Bearing Butt Hinges : 100mm x 75mm x 3mm (4 Nos. per shutter)
Acodor / Dorma / Kich Make ( Fire rated) 2) Door Closer with standard arm silverfinish (1 No. per shutter); Acodor / Dorma / Kich Make
fire rated 3) Panic Exit Device or Dead lock with cylinder - For Single Leaf door -Acodor / Kich / Dorma fire rated 4) External Trim With
cylinder or D type Pull handle 300 mm ss 304 - Acodor / Kich / Dorma Make fire rated 5) 300 mm round - 2 hours fire fire rated vision
panel glass 5mm - Saint globain make / schott 6) Groove gasket on 3 side of frame : Acodor / Kich / Dorma
Supply & fixing FRP Drain with Gratings are with 0% filler & are self pigmented without any painting or coating and have a minimum Rupees Fourteen
opening of 55% for smooth flow of water. The 0% filler imparts higher flexural strength and doesn’t allow the gratings to crack due to its Thousand Six
180 92.70 high cohesion. This enhances the life of the product by 50% under exposure to load, Sunlight or Rainfall. FRP Drain With Grating Size - R Mt. 14,696.36 Hundred Ninety Six
525MM Width x 300MM hight x 1000MM Length and Thirty Six Paise
Grassing with selected grass In rows 5 cm apart in both directions for Garden Lawn / Carpet Lawn including watering and maintenance of
the lawn for 12 months or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying farm clay up
Hundred Eighty Eight
181 2,638.86 mm thick, sludge, manure, pesticides , extra earth, disposal of rubbish, trench excavation and all labour with lead and lift etc. complete as Smt. 388.85
and Eighty Five Paise
directed by EIC. (Grass Lawn Should be as per Landscape Architect Selection from Specified nursary in make. / supplier list. )
Supply & Installation Tree Plans with Big Plastic bag size 25" x 25" (Normal & Decorative Trees) required Digging of pits 1000 x 1000 x Rupees One
1000 mm , filling with good earth with mixing of cow dong, manure, fertiliser and pesticide. Planting the following plant of 8' to 10' height Thousand Eight
with minimum 6" thick trunk .stack it well, maintain it for 12 month - Tree Plant will be selected by landscape Architect from Specified Hundred Eighteen
nursary in make. / supplier list. Only
Supply & Installation Tree Plans with Medium Size Plastic bag size 21" x 21" (Normal & Decorative Trees) required Digging of pits 750 x Rupees One
750 x 750 mm , filling with good earth with mixing of cow dong, manure, fertiliser and pesticide. Planting the following plant of 8' to 10' Thousand Six
height and minimum 4" thick trunk , stack it well, maintain it for 12 month - Tree Plant will be selected by landscape Architect from Hundred Sixteen
Specified nursary in make. / supplier list. Only
Supply & Installation Tree Plans with less than Medium Plastic bag size 18" x 18" (Normal & Decorative Trees) required Digging of pits 600 Rupees One
x 600 x 600 mm , filling with good earth with mixing of cow dong, manure, fertiliser and pesticide. Planting the following plant of 8' to 10' Thousand Four
height and Minimum 3" trunk stack it well, maintain it for 12 month - Tree Plant will be selected by landscape Architect from Specified Hundred Fourteen
nursary in make. / supplier list. Only
Schedule B Page 39 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
Ayurvedic shrubbery Clinning the bed, mixing of the fertilizer and pesticides, digging the pit planting the good quality of plant at
required distance, maintain it for 12 month name of plants Tulsi, Brahmi, Aloe vera, Ardusi, Asparagus, Panputti, Nagar vel, Phudina, Rupees Two
Ashwagandha, Gugal, Wedellia, Jecomentia, Umbrella palm, or any other etc. Shrub Plant will be selected by landscape Architect from Hundred Two Only
Specified nursary in make. / supplier list.
Planting of Ornamental shrubs (Flowering Plants) Digging of pits, filling with good earth with mixing of cow dong and pesticide. Planting
the following plant of 4' to 6' height stack it well, maintain it for 12 month Golden bamboo, Green bamboo, Ficus spp.Ixora spp.,
186 550.00 No. 353.50 Hundred Fifty Three
Hibiscus spp., Allamanda spp.Bougainvella spp., Nerium spp, Plumeria spp , or any other etc. Shrub Plant will be selected by landscape
and Fifty Paise Only
Architect from Specified nursary in make. / supplier list.
Providing pesticides ,dust as directed by architect engineer in charge.
Rupees Eighty and
Eighty Paise Only
Providing pesticides ,liquid as directed by architect engineer in charge.
Rupees Six Hundred
188 10.00 Kg. 600.95 and Ninety Five
Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal
for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete.
Hundred Seventy
and Thirty Six Paise
Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal
for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete.
[B] 20 mm. Rupees Two
190 815.00 Rmt. 208.80 Hundred Eight and
Eighty Paise Only
Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal
for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete.
Hundred Fifty Three
and Eighty Two Paise
Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal
for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete.
Hundred Thirty Eight
and Twenty Four
Schedule B Page 40 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal
for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete.
Hundred Forty Seven
and Seventy Two
Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal
for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete.
[F] 50 mm. Rupees Six Hundred
194 340.00 Rmt. 660.58 Sixty and Fifty Eight
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC Rupees One
plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing Thousand Three
195 190.00 of joints complete as per direction of Engineer in Charge. Rmt. 1,394.53 Hundred Ninety Four
65mm dia nominal bore and Fifty Three Paise
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC Rupees One
plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing Thousand Eight
196 130.00 of joints complete as per direction of Engineer in Charge. Rmt. 1,804.25 Hundred Four and
80mm dia nominal bore Twenty Five Paise
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC Rupees Two
plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing Thousand Seven
197 148.00 of joints complete as per direction of Engineer in Charge. Rmt. 2,724.84 Hundred Twenty
100 mm dia nominal bore Four and Eighty Four
Supply,Installing, tesitng and commissioning concealed forged brass lever operated ball valve of full flow with forged brass ball
(Machined to mirror smooth finish with hard chrome plated) and spindle with setting and gland of superior quality having minimum
Hundred Sixty Five
198 7.00 working pressure of 16 kg/cm2 etc. including providing of connectors, flanges, nuts, bolts, gaskets, etc As per drawings and design Each 965.56
and Fifty Six Paise
supplied by architect and instruction given by authority and E.I.C
Supply,Installing, tesitng and commissioning concealed forged brass lever operated ball valve of full flow with forged brass ball
(Machined to mirror smooth finish with hard chrome plated) and spindle with setting and gland of superior quality having minimum
199 32.00 working pressure of 16 kg/cm2 etc. including providing of connectors, flanges, nuts, bolts, gaskets, etc As per drawings and design Each 1,252.40
Hundred Fifty Two
supplied by architect and instruction given by authority and E.I.C
and Forty Paise Only
Supply,Installing, tesitng and commissioning concealed forged brass lever operated ball valve of full flow with forged brass ball Rupees One
(Machined to mirror smooth finish with hard chrome plated) and spindle with setting and gland of superior quality having minimum Thousand Eight
200 11.00 working pressure of 16 kg/cm2 etc. including providing of connectors, flanges, nuts, bolts, gaskets, etc As per drawings and design Each 1,843.25 Hundred Forty Three
supplied by architect and instruction given by authority and E.I.C and Twenty Five
(A) 50 mm Paise Only
Schedule B Page 41 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with
nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : Rupees Three
50 mm Thousand One
201 20.00 Each 3,151.51 Hundred Fifty One
and Fifty One Paise
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with
nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : Rupees Three
65 mm Thousand Five
202 30.00 Each 3,582.93 Hundred Eighty Two
and Ninety Three
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with
nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : Rupees Four
80 mm Thousand One
203 16.00 Each 4,149.27 Hundred Forty Nine
and Twenty Seven
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with
nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : Rupees Five
100 mm Thousand Five
204 11.00 Each 5,552.63 Hundred Fifty Two
and Sixty Three Paise
Providing and fixing Butterfly Valve with IP 54 actuator with Control Panel and Two Point Magnetic Sensor for Automated Tank Filling Rupees Eighteen
System 65 mm nominal bore Thousand Five
205 8.00 Each 18,520.37 Hundred Twenty and
Thirty Seven Paise
Providing, laying and jointing in true line and level 50 diametre U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain and
other end socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe shall
be jointed with each other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size 160 mm diametre x 210 mm
206 5.00 Rmt. 343.40 Hundred Forty Three
length x 196 mm heigh at every 2000 mm center to center or shall be concealed in walls as directed including necessary fittings such as
and Forty Paise Only
bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement including cost of all materials.
Schedule B Page 42 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
SOIL, WASTE, VENT PIPES & FITTINGS
Ultra Silent pipes & fittings
Providing and fixing soundproof Multilayer Polyproplene piping system as per EN 1451-Part 1-6 with 3 layer pipe made of PP + PP-MD +
PP and one layer fittings in PP MD, push-fit type,Halogen and Calcium free, having high impact resistance as per DIN EN ISO 291:2008-08
Ring stiffness SN6 6KN/m2 as per ISO 9969, offering sound levels of 19 dBA as per EN 14366 at a flow rate of 4 l/s, water tightness as per
EN 1451-1 minimum of 0.5 bar for 15 minutes, density of pipe = 1.15gms/cm3, elongation = 0.09mm/mn/K and E modulus 2300-3000 as
per ISO 178, along with factory fitted EPDM lip ring, Fire Behavior Classification according to EN 13501-1:2009 & classified D-s2-d2 (EN Rupees Eight
13501-1), meets the requirements of EN 4102-2 with Fire Classification B2, Smoke Development Category Q1 & Drip Formation category Hundred Eighty Six
TR1. Inclusive of all necessary specials like bends, tees,clean out plug, offsets, junctions, door piece, cop, cleanouts etc., laid under the and Seventy Eight
slabs/ Walls with suitable clamps, Pedestals and specials curing etc., complete . Fabricated GI bracket of suitable size to be provided for Paise Only
pipes,Galvanised rubber sleeved clamps/ u bolts, brackets, passivated fasteners & legend boards shall be included in the price
(suspended plumbing , plumbing Shaft & basement) All types of Fittings, Bends and pipes rate should be inclusive in item rate.
Providing and fixing soundproof Multilayer Polyproplene piping system as per EN 1451-Part 1-6 with 3 layer pipe made of PP + PP-MD +
PP and one layer fittings in PP MD, push-fit type,Halogen and Calcium free, having high impact resistance as per DIN EN ISO 291:2008-08
Ring stiffness SN6 6KN/m2 as per ISO 9969, offering sound levels of 19 dBA as per EN 14366 at a flow rate of 4 l/s, water tightness as per
EN 1451-1 minimum of 0.5 bar for 15 minutes, density of pipe = 1.15gms/cm3, elongation = 0.09mm/mn/K and E modulus 2300-3000 as
per ISO 178, along with factory fitted EPDM lip ring, Fire Behavior Classification according to EN 13501-1:2009 & classified D-s2-d2 (EN
13501-1), meets the requirements of EN 4102-2 with Fire Classification B2, Smoke Development Category Q1 & Drip Formation category
208 914.00 TR1. Inclusive of all necessary specials like bends, tees,clean out plug, offsets, junctions, door piece, cop, cleanouts etc., laid under the Rmt. 1,141.30
Hundred Forty One
slabs/ Walls with suitable clamps, Pedestals and specials curing etc., complete . Fabricated GI bracket of suitable size to be provided for
and Thirty Paise Only
pipes,Galvanised rubber sleeved clamps/ u bolts, brackets, passivated fasteners & legend boards shall be included in the price
(suspended plumbing , plumbing Shaft & basement) All types of Fittings, Bends and pipes rate should be inclusive in item rate.
Providing, laying and jointing in true line and level 160 diametre U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain and
other end socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe shall
be jointed with each other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size 160 mm diametre x 210 mm
Hundred Thirty Four
209 540.00 length x 196 mm heigh at every 2000 mm center to center or shall be concealed in walls as directed including necessary fittings such as Rmt. 834.38
and Thirty Eight
bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement including cost of all materials.
Providing, laying and jointing in true line and level 110 diametre U.P.V.C (Type B) conforming to IS13592-1992 with one end plain and
other end socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe shall
be jointed with each other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size 110 mm diametre x 149 mm Rupees Eight
210 3,860.00 length x 145 mm heigh at every 2000 mm center to center or shall be concealed in walls as directed including necessary fittings such as Rmt. 856.03 Hundred Fifty Six
bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement including cost of all materials. and Three Paise Only
Schedule B Page 43 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
Providing, fixing, testing and commissioning ISI Marked UPVC SWR grade soil, waste and vent pipes Type 'A' 4 kg/sqcm conforming to IS:
13592 including all SWR moulded fittings conforming to IS: 14735 i.e. bends, junctions, cowls, offsets, Y (plain/door), tees (plain/door),
clean out plug, etc., with hi-tech clamps and anchor fasteners at 1m interval and jointing with cement solvent including cutting holes in
walls and floors, wherever required and making them good, complete as directed by the Project Manager. The scope shall also include Rupees Four
211 1,250.00 fixing waste pipes to the floor with concrete 1:2:4 bedding for full length and wall/ceiling with necessary clamps, supports, connections, Rmt. 454.50 Hundred Fifty Four
protecting fittings and pipes till the final handing over etc, As per drawings and design supplied by architect and instruction given by and Fifty Paise Only
authority and E.I.C for all leads, depth and heights. (For Vent & ASP only)
Providing, fixing, testing and commissioning ISI Marked UPVC SWR grade soil, waste and vent pipes Type 'A' 4 kg/sqcm conforming to IS:
13592 including all SWR moulded fittings conforming to IS: 14735 i.e. bends, junctions, cowls, offsets, Y (plain/door), tees (plain/door),
clean out plug, etc., with hi-tech clamps and anchor fasteners at 1m interval and jointing with cement solvent including cutting holes in
walls and floors, wherever required and making them good, complete as directed by the Project Manager. The scope shall also include Rupees Five
212 1,250.00 fixing waste pipes to the floor with concrete 1:2:4 bedding for full length and wall/ceiling with necessary clamps, supports, connections, Rmt. 520.15 Hundred Twenty and
protecting fittings and pipes till the final handing over etc, As per drawings and design supplied by architect and instruction given by Fifteen Paise Only
authority and E.I.C for all leads, depth and heights. (For Vent & ASP only)
Providing, fixing, testing and commissioning ISI Marked UPVC SWR grade soil, waste and vent pipes Type 'A' 4 kg/sqcm conforming to IS:
13592 including all SWR moulded fittings conforming to IS: 14735 i.e. bends, junctions, cowls, offsets, Y (plain/door), tees (plain/door),
clean out plug, etc., with hi-tech clamps and anchor fasteners at 1m interval and jointing with cement solvent including cutting holes in
walls and floors, wherever required and making them good, complete as directed by the Project Manager. The scope shall also include Rupees Six Hundred
213 968.00 fixing waste pipes to the floor with concrete 1:2:4 bedding for full length and wall/ceiling with necessary clamps, supports, connections, Rmt. 656.50 Fifty Six and Fifty
protecting fittings and pipes till the final handing over etc, As per drawings and design supplied by architect and instruction given by Paise Only
authority and E.I.C for all leads, depth and heights. (For Rain water)
Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter with jali of the following nominal diameter of self
cleansing design with C.I scread down or hinged grating including the cost of cutting and making good the walls.
Hundred Eighty Five
and Thirty Seven
Providing, Installing, testing and commisssioning UPVC Multi trap of self cleansing design with or without vent arm with provision for
connecting upvc inlet fitttings complete including cost of cutting and making good the walls and floors where ever required complete in
all respects with necessary arrangements with proper care at all levels, protecting fittings and floor trap till the final handing over etc As
215 189.00 Each 444.40 Hundred Forty Four
per drawings and design supplied by architect and instruction given by authority and E.I.C
and Forty Paise Only
For 110 mm inlet and 110 mm oulet
Providing and fixing rain water "KHURRAS" size as per drawing required depth with lead flashing around rainwater pipe with one piece
Rupees Six Hundred
lead sheet of 3 mm thick set on a layer of cold bitumen. Including heavy duty CI grating complete as required As per drawings and design
216 12.00 Each 665.59 Sixty Five and Fifty
supplied by architect and instruction given by authority and E.I.C
Nine Paise Only
Schedule B Page 44 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
SANITARY AND CP FIXTURES
Providing and fixing water closet squatting Pan (Indian type W.C. Pan) size 580mm (Earthwork, bed concrete, foot reste and trap to be
measured and paid for separately) (A) Vitreous China.(I) Long pattern = White colour
Hundred Seventy
Three and Forty
Three Paise Only
Providing and fixing wsh down water closet (European type, W.C. Pan) with integral P or S trap including jointing the trap with soil pipe in
Cement Mortar 1:1 (1-Cement : 1-fine sand) (Seal and cover to be measured and paid for separately)(A) vitreous China Pattern :(i) in
Hundred Thirty Six
and Thirty Paise Only
Providing and fixing 12.5 Litres low level flushing cistern with a pair, of C.I. or Mild brackets, complete with fittings such as lead valve less
syphon, 15mm nom.nal size brass ball valve with polythene float, C.P brass handle unions and couplings for connections, with inlet, outlet Rupees Two
and overflow pipes, 40mm dia. porcelain enamelled flush bend including cutting holes in walls and making good the same connecting the Thousand Three
219 124.00 flush bend with cistern and closet (overflow pipe to be measured and paid for separately)(A) Vitreous China (I) In white colour Each 2,371.40 Hundred Seventy
One and Forty Paise
Health Fauset Heavy duty with hook with fitting
220 124.00 Each 582.03 Hundred Eighty Two
and Three Paise Only
Providing and fixing 100mm size P or S trap for water closet squatting pan including jointing the
trap with the pan and soil pipe in cement Mortar 1:1 (1-Cement : 1-Fine sand)(A) Vitreous China. Rupees Three
Seven and Fifty Two
supply,Installing, testing and commisssioning 15mm C.P 2-Way brass bib tap with C.P brass threaded flange complete, including cutting Rupees One
and making good the walls wherever required As per drawings and design supplied by architect and instruction given by authority and Thousand Five
222 124.00 E.I.C Each 1,579.64 Hundred Seventy
Nine and Sixty Four
Providing and fixing of first quality white vitreous china Wash basin as per product detail, including specially fabricated C.I. brackets
with studs painted with two or three coats of enamel paint of approved shade over a coat of primer complete including filling gap Rupees Three
between counter and wash basin with approved sanitary grade material, cutting and making good the walls where required to the Thousand Six
complete satisfaction , As per drawings and design supplied by architect and instruction given by authority and E.I.C including Oval Wash Hundred Thirty Nine
Basin; Rag Bolts for Wash Basins, Bottle Trap , Waste Coupling, Prismatic Pillar Cock . and Three Paise Only
Schedule B Page 45 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
Providing and fixing Urinal or approved quality including conecting the Urinal with waste pipe , Bottle Trap, pressmatic type tap etc. Rupees Two
complete.(A) White earthenware flat back or corner type size 430mm x 260mm x 350mm. Thousand Six
224 75.00 Each 2,682.56 Hundred Eighty Two
and Fifty Six Paise
Providing and fixing stone slab table rubbed, edges rounded and polished of size 75x50cm deep and 1.8cm thick fixed in Urinal partitions
by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement
concrete 1:2:4 (1cement: 2coarse sand: 4graded stone aggregate 6mm nominal size) as per direction of Engineer-in-charge and finished
225 4.62 sqm 3,374.59 Hundred Seventy
Four and Fifty Nine
Granite Stone of approved shade.
Providing and fixing toilet paper holder.(A) C.P.Brass
Seven and Ninety
Nine Paise Only
Providing and fixing chromium plated, bottle trap with necessary couplings of approved quality.
Providing and fixing C.P. brass waste for washbasin or sink. (A) 32mmdia.
Rupees Sixty Seven
228 102.00 Each 67.91 and Ninety One
Providing and fixing M.I. fisher union for washbasin
or sink. (A) 32mm dia.
229 102.00 Each 78.75 Eight and Seventy
Five Paise Only
Providing and fixing Kitchen sink with C.I. or M.S. brackets, painted white including cutting holes in walls and making good the same but
excluding fittings. (C) Vitreous China Sink.(i) 600mm x 450mmx 150mm size Rupees Two
230 1.00 Each 2,326.66 Hundred Twenty Six
and Sixty Six Paise
Schedule B Page 46 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
Providing and fixing pillar tap, capstan head, screw down high pressure with screws, shanks and back nuts. (i) 15mm dia.
Hundred Eight and
Seventy Three Paise
Providing and fixing screw down bib taps of following size.(B) Brass chromium plated screws down Bib Tap. (i) 15mm dia.
Hundred Eighty Six
and Eighty Three
Providing and fixing C.P. brass long body bib cock of approved quality
Rupees Six Hundred
conforming to IS standards and weighing not less than 690 gms. ( for sink)
233 13.00 Each 665.41 Sixty Five and Forty
Supply,Installing, testing and commisssioning 15mm C.P. brass angle valve with C.P copper connecting pipe 450 mm long and nuts, Rupees Seven
washer with C.P. brass flange complete, including cutting and making good the walls, wherever required As per drawings and design Hundred Thirty Five
supplied by architect and instruction given by authority and E.I.C and Twenty Eight
Providing and Fixing Differently abled Toilet set including EWC, Cistern, Seat Cover, Fittings, Washbasin,, Hinged Rail, Grab Bar and Faucet Rupees Twenty Nine
with Spatula Lever including Cast Iron chair backed and necessary bolts and nuts complete, including painting of fittings and brackets, Thousand One
235 9.00 cutting and making good the walls and floors wherever required as per technical specifications, As per drawings and design supplied by Each 29,155.67 Hundred Fifty Five
architect and instruction given by authority and E.I.C including Toilet Set+ Cistern Set+ Wash Basin and Grab Bar as directed by EIC. and Sixty Seven
Providing and fixing 600mm x 450mm bevelled edge mirrror of superior glass mounted on 6mm thick A.C. sheet or plywood sheet and
fixing to wooden pluge with C.P. brass screws and washers.
Hundred Fifty Four
and Fifty Eight Paise
Providing and Fixing Soap Dish in Polished chrome of approved make and conforming to Manufacturers Standards as per technical
Rupees Six Hundred
specifications, As per drawings and design supplied by architect and instruction given by authority and E.I.C.
237 102.00 Each 616.10 Sixteen and Ten
Providing and fixing Liquid Soap Dispenser in Glass Bottle with all necessary accessories and fittings confirming to manufacturers Rupees One
specifications and including drilling holes in the walls, inserting rawal plugs, fixing the dispenser to the wall with GI Screws, complete and Thousand Two
238 102.00 making good to As per drawings and design supplied by architect and instruction given by authority and E.I.C Each 1,231.19 Hundred Thirty One
and Nineteen Paise
Schedule B Page 47 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
External Drainage
Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and water tight C.I. cover with frame of 300mm x 300mm size Rupees One
(inside) with standard weight.(i) Square mouth traps.(B) 150mm x 100mm size P or R type Thousand Two
239 51.00 Each 1,246.92 Hundred Forty Six
Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with bricks having crushing strength not less
than 35Kg/ Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm intenal dimensions total weight of cover with frame to be Rupees Seven
not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded Thousand One
240 50.00 stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished smooth with a Each 7,180.44 Hundred Eighty and
floating coat of neat cement on walls and bed concrete etc. complete.(iii) Inside dimensions 600mm x 850 mm and 450mm deep for pipe Forty Four Paise
lines with three or more inlets. Only
Extra over items 24.44 for every additional depth of 0.1M. of part thereof beyond 450mm depth for Brick masonry chamber.(iii) for
Five and Fifty Nine
Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-cement :2-coarse sand : 4-graded stone aggregate 20mm nominal size)
foundation concrete 1:3:6 mix (1-cement : 3- coarse sand :6-Brick bats 40 + 50mm size) inside plastering 15mm thick with Cement Mortar
Rupees Nineteen
1:3 (1-Cement : 3-coarse sand)finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix (1- Cement
:2-Coarse sand :4-stone aggregate 20mm nominal size) finished smooth complete including curing and festing (i) Inside size 900mm x
242 50.00 Each 19,349.63 Hundred Forty Nine
1200mm and 1.5M. deep including C.I. cover with frame size 560mm diameter total weight of cover and frame to be not less than
and Sixty Three Paise
kgs. (Wt. of cover 64 Kg. and Wt. of frame 64 Kg.)(A) With 230mm thick walls of brick msonry using brick having crushing strength not less
than 35Kg. / Sq.cm. in Cement Mortar 1:5 (1- Cement: 5-Coarse sand) (2) B type depth 1.50 Metre for 150mm diameter sewer.
Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-cement :2-coarse sand : 4-graded stone aggregate 20mm nominal size)
foundation concrete 1:3:6 mix (1-cement : 3- coarse sand :6-Brick bats 40 + 50mm size) inside plastering 15mm thick with Cement Mortar
1:5 (1-Cement : 5-coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix (1-Cement Rupees Twenty
:2-Coarse sand :4-stone aggregate 20mm nominal size) finished smooth complete including curing and festing (i) Inside size 900mm x Three Thousand
243 20.00 1200mm and 1.5M. deep including C.I. cover with frame size 560mm diameter total weight of cover and frame to Each 23,470.48 Four Hundred
be not less than 128 kgs. (Wt. of cover 64 Kg. andWt. of frame 64 Kg.)(A) With 230mm thick walls of brick msonry using brick having Seventy and Forty
crushing strength not less than 35Kg. / Sq.cm. in Cement Mortar 1:5 (1- Cement: 5-Coarse sand) (3) C type depth 2.25 Metre for 150mm Eight Paise Only
diameter sewer.
(II) Extra rate for constructing B.B. masonry for every additional depth of 0.1M. GR Part thereof over item No.24.27 (I) for depth from
Seven and Nineteen
Schedule B Page 48 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
Providing and Laying Underground drainage System SN8 complete with all fittings excavation of trench 0.7m wide and depth varying
from 0.75m to 2.4m , and refilling the same after laying of drain and concrete encasement in M10 grade concrete with minimum
245 350.00 thickness of encasement 100m thk & As per drawings and design supplied by architect and instruction given by authority and E.I.C. Rmt. 1,969.50
Hundred Sixty Nine
and Fifty Paise Only
Providing and Laying Underground drainage System SN8 complete with all fittings excavation of trench 0.7m wide and depth varying Rupees Two
from 0.75m to 2.4m , and refilling the same after laying of drain and concrete encasement in M10 grade concrete with minimum Thousand Three
246 450.00 thickness of encasement 100m thk & As per drawings and design supplied by architect and instruction given by authority and E.I.C. Rmt. 2,388.65 Hundred Eighty Eight
250 mm and Sixty Five Paise
Providing laying (to level or slopes) and jointing reinforced concrete Light duty non-pressure pipes I.S. class NP2 of the following internal
diameter with collars and butt ends prepared for collar joints including testing of joints complete.(C) 250mm
Hundred Fifty Six
and Seventy Three
Providing laying (to level or slopes) and jointing reinforced concrete Light duty non-pressure pipes I.S. class NP2 of the following internal
diameter with collars and butt ends prepared for collar joints including testing of joints complete.(C) 300mm
Rupees Six Hundred
248 350.00 Rmt. 678.01 Seventy Eight and
Supply & installation of rain water harvesting pit approximately 4m x 4m deep complete with: Rupees One Lakh
a) filling as shown in drawing Seventy One
b) 2# 150mmØ slotted pipes Thousand Six
c) Manhole, PVC rungs Hundred Nineteen
d) excavation, side walls and top slab by others. and Twenty Paise
Generally as shown on drawings Only
Supply & installation of rain water percolation well approximately complete with:
Rupees One Lakh
a) Bore hole of 150 mm dia upto min 30 meters depth
Fourteen Thousand
b) Perforated encasing pipe of GI
250 10.00 Each 1,14,412.80 Four Hundred
c) Connection to Pit
Twelve and Eighty
Providing and fixing C.P. brass towel rail comlete with C.P. brass brackets fixed to wooden plugs with C.P. brass scews.(B) 600mm x 20mm
Rupees Six Hundred
251 - Each 616.42 Sixteen and Forty -
Schedule B Page 49 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
Supply,Installing, testing and commisssioning C.P single lever concealed diverter for bath and shower complete with making good the Rupees Four
walls & floor wherever required As per drawings and design supplied by architect and instruction given by authority and E.I.C Single Lever Thousand Nine
252 - Concealed Divertor ,Shower Head incl. shower arm,Bath spout 235 mm with wall flang Each 4,999.50 Hundred Ninety -
Nine and Fifty Paise
Providing erecting and fixing double coated (3 layer)ISI water tank of required capacity each with all necessary Rupees Eleven and
253 45,000.00 fittings and connection etc. complete on terrace ltr 11.74 Seventy Four Paise
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 :
15mm nominal bore
Hundred Seventy
Eight and Thirty One
Fire Sprinkler System
Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required
Hundred Seventy
255 2,609.00 Pendent Sprinkler Each 473.49
Three and Forty Nine
Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required
Upright Sprinkler
Hundred Seventy
Three and Forty Nine
Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required
Horizontal side wall sprinkler
Hundred Fifty Nine
and Sixty Six Paise
Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer
thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to Rupees One
sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes Thousand Two
258 981.00 complete as required. Each 1,250.84 Hundred Fifty and
700 mm Eighty Four Paise
Schedule B Page 50 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer
thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to Rupees One
sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes Thousand Five
259 972.00 complete as required. Each 1,514.80 Hundred Fourteen
1200 mm and Eighty Paise
Providing & fixing flow switch in following sizes M.S. pipe including connection etc as required.
Hundred Fifteen and
Seventy Paise Only
Providing & fixing flow switch in following sizes M.S. pipe including connection etc as required.
150mm Rupees Eight
261 22.00 Each 8,182.65 Hundred Eighty Two
and Sixty Five Paise
Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like
elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and
Rupees Six Hundred
painting with two or more coats of synthetic enamel paint of required shade complete as required :
262 5,244.00 Rmt 674.86 Seventy Four and
Eighty Six Paise Only
Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like
elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and Rupees Seven
painting with two or more coats of synthetic enamel paint of required shade complete as required : Hundred Seventy
32 mm One and Ninety One
Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like
elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and Rupees Nine
painting with two or more coats of synthetic enamel paint of required shade complete as required : Hundred Thirty
40 mm Seven and Ninety
Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like
elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and
painting with two or more coats of synthetic enamel paint of required shade complete as required :
265 1,777.00 Rmt 1,161.95 Hundred Sixty One
and Ninety Five
Schedule B Page 51 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like
elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and Rupees One
painting with two or more coats of synthetic enamel paint of required shade complete as required : Thousand Four
65 mm Hundred Sixty Four
Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like
elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and
painting with two or more coats of synthetic enamel paint of required shade complete as required :
267 864.00 Rmt 1,569.93 Hundred Sixty Nine
and Ninety Three
Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like
elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and
painting with two or more coats of synthetic enamel paint of required shade complete as required :
268 460.00 Rmt 2,127.94 Hundred Twenty
Seven and Ninety
Four Paise Only
Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like
elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and
painting with two or more coats of synthetic enamel paint of required shade complete as required :
269 893.00 Rmt 2,976.61 Hundred Seventy Six
and Sixty One Paise
Fire Hydrant System
Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast
iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required :
270 33.00 Each 6,367.99 Hundred Sixty Seven
Single headed Gunmetal
and Ninety Nine
Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc.
conforming to IS 636 (type-A) as required :
Hundred Thirty Two
and Fifty Paise Only
Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the
following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal Rupees Seven
internal dia gun metal globe valve & nozzle. Thousand Two
272 33.00 Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket. Set 7,224.99 Hundred Twenty
30 m Four and Ninety
Nine Paise Only
Schedule B Page 52 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS
suitable for instantaneous connection to interconnect hose pipe coupling as required :
Thousand Twelve
and Seventeen Paise
Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between
flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required. Rupees One
Hundred and Twenty
Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Gunmetal/Stainless Steel coupling
and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal/Stainless Steel cap and chain as required : Rupees Six
Gun Metal Thousand Three
275 10.00 Set 6,367.99 Hundred Sixty Seven
and Ninety Nine
Providing, fixing, testing and commissioning of weather proof standard fire Hose Cabinet wall mounting type 18 Guage. (750 x 600 x 250) Rupees Four
having Double Opening with M.S. fabricated stand, necessary locking arrangement by allan key. Thousand Four
Hundred Forty Four
Fireman Axe-made of carbon steel with rubber insulated handle tested to 20,000 Volts as per IS:926 Rupees One
277 49.00 Set 1,218.69 Hundred Eighteen
and Sixty Nine Paise
Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like
elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and
painting with two or more coats of synthetic enamel paint of required shade complete as required :
278 700.00 Rmt 2,976.61 Hundred Seventy Six
and Sixty One Paise
Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like
elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and
painting with two or more coats of synthetic enamel paint of required shade complete as required :
279 50.00 Rmt 4,549.87 Hundred Forty Nine
200 mm(wall thickness 6.3 mm)
and Eighty Seven
Schedule B Page 53 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges,
tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive
treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required. 200 mm. dia
280 30.00 Rmt 4,631.49 Hundred Thirty One
and Forty Nine Paise
Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges,
tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive
treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required. 150 mm. dia
281 100.00 Rmt 3,168.17 Hundred Sixty Eight
and Seventeen Paise
Fire Extinguisher System
Providing, storing, handling, shifting, installation, testing and commissioning of halon free portable fire Extinguishers as described below:
282 59.00 Supplying & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 /15683 complete erected Set 6,565.00
Hundred Sixty Five
with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts grouted in wall complete
Supplying and erecting ABC powder type fire extinguisher as per IS : 13849 /15683 of 6 kg capacity with necessary clamp for erection on Rupees Two
wall Thousand Seven
283 59.00 Set 2,777.50 Hundred Seventy
Seven and Fifty Paise
Supply and fixing of ISI mark (IS:15683) Clean Agent HCF236fa, 10 Kg modular type ceiling mounted Fire extinguisher , Stored pressure Rupees Sixty Seven
type with pressure guage.. Thousand Five
284 10.00 Set 67,575.06 Hundred Seventy
Five and Six Paise
Valve & fittings
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with Rupees Three
nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : Thousand One
285 6.00 50mm Set 3,150.73 Hundred Fifty and
Seventy Three Paise
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with
nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : Rupees Three
65mm Thousand Five
286 4.00 Set 3,582.93 Hundred Eighty Two
and Ninety Three
Schedule B Page 54 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with
nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : Rupees Four
80mm Thousand One
287 4.00 Set 4,149.27 Hundred Forty Nine
and Twenty Seven
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with
nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : Rupees Five
100mm Thousand Five
288 23.00 Set 5,552.63 Hundred Fifty Two
and Sixty Three Paise
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with
nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : Rupees Seven
150mm Thousand Four
289 28.00 Set 7,462.36 Hundred Sixty Two
and Thirty Six Paise
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with
nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : Rupees Twelve
200mm Thousand Six
290 4.00 Set 12,665.19 Hundred Sixty Five
and Nineteen Paise
Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber
gasket, GI bolts, nuts, washers etc.as required :
Hundred Three and
Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber
gasket, GI bolts, nuts, washers etc.as required : Rupees Fourteen
150 mm Thousand Eight
292 20.00 Set 14,813.11 Hundred Thirteen
and Eleven Paise
Schedule B Page 55 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade
sheet with 3 mm dia holes with stainless steel flange. Rupees Eighteen
200 mm Thousand Five
293 6.00 Set 18,543.46 Hundred Forty Three
and Forty Six Paise
Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade
sheet with 3 mm dia holes with stainless steel flange.
Hundred Fifty and
Thirteen Paise Only
Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade
sheet with 3 mm dia holes with stainless steel flange. Rupees Nine
100 mm Thousand Two
295 6.00 Set 9,281.31 Hundred Eighty One
and Thirty One Paise
Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap
and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required :
2 way-100 mm dia M.S. Pipe
Hundred Fifteen and
Nine Paise Only
Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap
and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required : Rupees Eleven
4 way - 150 mm dia M.S. Pipe Thousand Six
297 4.00 Set 11,638.28 Hundred Thirty Eight
and Twenty Eight
Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged
connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith
synthetic enamel paint of approved shade as required.
298 4.00 Set 15,194.56 Hundred Ninety Four
and Fifty Six Paise
Schedule B Page 56 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required.
299 10.00 Set 1,287.59 Hundred Eighty
Seven and Fifty Nine
Providing, fixing, testing & commissioning of installation control valve of cast iron body, brass/bronze working parts comprising of water
motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet
riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and
300 2.00 bypass, test control box, ball valves, MS pipe of required size, flanges, orifice plate, gasket etc of follwing sizes as required : Set 40,145.00
Hundred Forty Five
Getting Approval/NOC of Fire protection system (Hydrant, Sprinkler etc..) from local fire authority and any other relevant statutory Rupees Eighty
301 2.00 authority at initial and various other stages of work, including preparation of report/drawings as per fire authority. LOT 80,800.00 Thousand Eight
Providing, and erecting 11 KV D.P. 9 mtr. high Structure made of 6" x 3" ‘I’-Section Girder, 4" x 2"channels, clamps, nuts, bolts etc.
Suitable for erection of the followings duly connected with necessary ACSR conductors. as per drawing approved by the Engineer- in Rupees Ninety Eight
charge complete with following. Height as per IS 7 Mtr above ground ) (A) 11 KV 200 Amps Drop out fuses with S.R.B.P. tubes carries.- Thousand Four
302 1.00 Three nos (B) 11 KV G.O.D. switch complete with insulators, operating handle with galvanised pipe, Sq.bar etc. 400 Amp.- One Set (C) 11 Ea. 98,433.59 Hundred Thirty
KV lightening arrestor with clamp- Three Nos. (D) 11 KV shackle insulators- Six Nos. (E) The above D.P. structure should be earthed Three and Fifty Nine
with 25 mm.X 3 mm thick double copper earth strips run separately and connected with separate copper plate earth electrode. Paise Only
Providing, erecting, testing commissioning & getting Plan Approval as well as NOC from Electrical Inspector for extensible H.T panel
comprising of one 630A/800A/1250A. H.T. VCB incoming & Three outgoing 630/800/1250 A Drawout type VCB confirming as per I.S. for
use on 11 KV, 3 phase, 50 c/s. unearthed A.C. supply system having breaking rupturing capacity of 350 MVA or Above complete with
spring operated mechanism, mechanically & automatic ON-OFF and spring mechanism charged, discharged indicators, ON-OFF
mechanical push button, operation counter necessary auxiliary switches, closing shunt trip, air insulated busbar chamber having heat
shrinkable PVC sleeves, mechanical interlocks safety shutters, isolating plugs and a VCB trolley with three vacuum interrupters with epoxy
support insulators and self aligning finger type isolating contacts. The breaker shall be Manual cum motorised mechanism & auto spring
charge with TNC switch closing with following accessories. The Standared Companies Switchgear shall be Used and Only Manufacutres as
Rupees Eighteen
per IEC 61439 for beneficial use. 1.flush mounting type digital multifunctional meter with communication facility - Three sets. 2. Power
Lakh Six Thousand
Factor Meter One No 3. Double core current transformer cast resin type having ratio 200 to 50/1 core for metering & second core for
303 1.00 Ea. 18,06,448.63 Four Hundred Forty
protection having required class of accuracy. - Three Sets 4. Instantaneous under voltage relay,Over Voltage relay & Temperature rise
Eight and Sixty Three
Tripping Relay 5. Electrical closing coil & short trip coil operating on 110V. D.C.- Three Sets 6. Auxiliary relay for anti pumping device
Three phase Three limb Drawout type feeder connected & output of 200 VA cast resin insulated potential transformer having ratio
12000V./110V. and 200 VA Burdon with 0.5 accuracy. - One No. 8. Common Alarm bell operating on 110V A.C.- One No. 9. Digital KWH
Meter - One No. 10. Cable boxes suitable up to 11 KV 3core 150 sq.mm XLPE cable. - Three Nos 11. 230V. A.C. to 110V. D.C. power pack
for closing & tripping circuit common. 12.Breaker ON-OFF, Auto trip and spring charged indicators. - Three Sets. 13.Phase indicating &
panel illumination lamps with plug socket - Three Sets 14.Numerical Communicable type non directional O/C & E/F Relay with a setting of
5-250% both in O/C & E/F. -Three Set complete with necessary interconnection with air insulated high grade copper busbar {Breaker
Testing scope include Closing Time, Opening Time, VCB Hi-Pot test at Site}{ Relay Testing Scope Include testing of all protection by three
phase testing kit at site }(VCB Trolley is to be provided)
Schedule B Page 57 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
Supplying, installation, testing and commissioning of following capacity (continuous loading) BEE 5 Star rated (Corresponding Level as per
BIS amended upto date of receipt of tender) , 11/0.433 KV step down, 3 Phase, 50 Hz, Dyn 11 vector group, ONAN (Oil Natural Air Natural)
copper wound transformer (Electrolytic grade 99.9% pure copper, Core made of first grade Cold Rolled Grain Oriented (CRGO) Core grade
MOH or better, suitable for out door/indoor applications with On Load Tap Changer (OLTC) on HV side having AVR relay and Remote Tap
Changer Control (RTCC) for automatic sensing of incoming voltage, automatic operation of OLTC and facility for remote and manual
operation of OLTC HV side in range of +5% to -15% in steps of 2.5%, having cable end boxes on HV side suitable for 3x300 sq.mm XLPE
cable of 11 KV grade, including bus trunking arrangement on LV side including supplying and laying of copper conductor multicore control
cable from transformer to HT breaker/panel for safety tripping, complete with all accessories and safety provisions as per relevant IS
Code including first filling of filtered dehydrated oil, i/c supplying and grouting of suitable M.S. Channel with all accessories and Rupees Twenty Six
transformer shall be confirming to IS : 2026 (Part 1 to Part 5), IS : 1180 and as per CPWD specifications complete in all respects etc as Lakh Twenty
required at site. The maximum flux density in any part of the core and yoke at rated voltage and frequency shall be such that the flux Thousand Fifty and
density with + 12.5 percent combined voltage and frequency variation from rated voltage and frequency does not exceed 1.9 Tesla. The Forty Two Paise Only
permissible temperature-rise shall not exceed 35 0C for oil and 40 0C up to 200 KVA and 40 0C for oil and 45 0C for
above 200 KVA for winding. Inside of tank shall be painted with varnish or liquid resistant paint. For external surfaces one coat of thermo
setting powder paint or one coat of epoxy primer followed by two coats of polyurethane base paint shall be used. IS: 1180 (Part 3) shall
be referred to for paint thickness for normal to medium corrosive atmosphere. For highly polluted atmosphere and special application
external paint work shall be as per direction of Engineer-in-Charge. Design ambient condition : a) air temperature 50 0C, b) Relative
Humidity 90 % Max, c) Seismic Zone as per location of site, d) Altitude as per location/site. Noise level Shall not exceed limits as per NEMA
TR-1 with all accessories running measured as per IEC 551 / NEMA standard. The transformer should have QR code which should contain
drawing, test report OEM manual, Geo- Tag of manufacturing location etc. Marking Each transformer shall be provided with rating plate
made of anodized aluminium/ stainless steel material securely fixed on the outer body, easily accessible as per IS: 1180 Part- 3. The
Supply, Installation, Testing & Commissioning (SITC) of 25kVA, 3 Phase, Oil Cooled Servo Controlled Voltage Stabilizer with Rupees One Lakh
305 4.00 manual/automatic bypass system, suitable for unbalanced load, having input voltage range of 340V–480V and output voltage 415V ±1% Ea. 1,15,000.00 Fifteen Thousand
accuracy, detail description as per detail specification. Only
Supplying, Installation, Testing & Commissioning of Unit Rate ‘Silent Type Diesel Generating set as per CPCB IV + or better norms along
with having Prime Power Rating of KVA as below, 415 volts at 1500 RPM, 0.8 lagging power factor at 415 V suitable for 50 Hz, 3 phase
system & for 0.85 Load Factor, including testing at factory and site with fuel, load for test and other necessary arrangements Complete as
per CPWD specifications, should have QR code which should contain drawing, test report OEM manual,Geo- Tag of manufacturing
location, rating plate as per relevant IS Code etc. and consisting of the followings: (A) Diesel Engine: Tourbocharged Diesel engine
stroke water cooled,multi cylinder, dynamically balanced fly wheel, electric start of suitable BHP at 1500 RPM suitable for above output
of alternator at 40 0C, 50% RH & at 1000 Meter MSL , capable of taking 10% over loading for one hour after 12 hours of continuous
operation. The engine will be with Electronic governor, Dry type Air filter with service indicator, first filling of engine fuel (after Rupees Fifty Four
commissioning) lubricating Oil, Coolant and other consumables complete with all the required accessories, the Electronic governor shall Lakh Twenty Nine
306 3.00 be as per ISO 8528.The engine shall comply to the latest CPCB norms (CPCB IV + or better) and Conforming to BS 5514, BS 649, IS 10000, IS Ea. 54,29,176.27
10002, IS 13018 and as per CPWD specifications.(B) Engine mounted Instrument Panel fitted with and having digital dis Plate for Hundred Seventy Six
following: (i) Start-stop switch with key (ii) Water temperature indication (iii) Lubrication oil pressure indication (iv) Lubrication oil and Twenty Seven
temperature indication (v) Battery charging indication and Voltage indication (vi) RPM indication (vii) Over speed indication (viii) Low Paise Only
lubricantion Oil trip indication (ix) Engine Running Hours indication (x) Fuel Level (C) Alternator: Synchronous alternator rated of
appropriate KVA, 415 volts at 1500 RPM, 3 phase 50 Hz, AC supply with 0.8 lagging power factor at 40 0C, 50% RH & at 1000 Meter MSL.
The alternator shall be having Screen Protected Drip Proof (SPDP) enclosure IP23,brushless, continuous duty, dynamically balanced rotor,
capable of taking 10% over loading for one hour after 12 hours of continuous operation, self cooled,self-excited and self-regulated
through AVR conforming to IS13364(Part 2)/IS: 4722/BS 2613 suitable for tropical conditions and with class- H insulation.(D) Base Frame &
Foundation: Both the engine and alternator shall be mounted on suitable base frame made of MS channel with necessary reinforcement
which shall be installed on suitable cement concrete foundation and vibration isolation arrangement as per recommendations of
manufacturer.(E) FUEL TANK: Daily service fuel tank of suitable liters capacity as per CPWD Specifications, fabricated out of 3 mm thick
Schedule B Page 58 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
HYBRID Power Factor Correction System
Supply, Installation, testing and commissioning of HYBRID APFC Panel, 3 phase 4 wire, 415 V, 50 Hz AC System for Ambient temperature -
5°C to +40°C of following capacity with passive solution of 60% capacity and active solution of 40% capacity,3Phase 4 wire Hybrid Power
Factor Correction Solution (with arrangment for neutral current balance) to achieve >0.99 lag and TDDI/THDV values within IEEE
recommended limits.APFC should be designed as per IS 16636 Or IEC 61921. The active section and passive section shall work in sync to
give optimized output. The degree of protection of passive section should be IP 42, and of active section should be minimum IP 21.The
switching device for APFC passive section should be through capacitor duty contactor and for the active compensation system shall be
IGBT based with 3 level topology having 12 IGBT in inverter circuit. The active compensation system should filter harmonics from 2nd to
Rupees Fifteen Lakh
50th individual harmonic order and shall be selectable for the entire range. The active compensation system should have feature to
Forty Thousand Eight
improve PF correction and harmonic filtration having response time < 100 Micro second. The hybrid panel shall be indoor type floor
307 3.00 Ea. 15,40,849.15 Hundred Forty Nine
mounted free standing totally enclosed, extensible,fabricated in compartmentalised designed made of CRCA sheet steel of 2.0mm thick
and Fifteen Paise
for framework & covers, 3 mm thick for gland plate i/c cleaning & finishing complete with 9 tank process for powder coated of approved
shade ( RAL 7032-Siemens gray or as approved by Engineer-in-Charge), having front section (switch gear and control accessories) and rear
section (capacitor and reactor), front and rear access, having suitable current carrying capacity, extensible TPN Aluminium alloy bus bar of
high conductivity, DMC/SMC bus bar supports,bottom base channel of MS Section, fabrication shall be done in transportable section,
entire panel shall have common copper earth bar of minimum size of 25mm x 5mm with 2 nos. earth studs, the earth terminals provided
on the body of capacitor bank shall also be bonded to the main capacitor panel earth bus with 2 nos. 8 SWG or 6 SWG GI earth wires/
equivalent size of copper conductor cable, forced ventilation for maintaining temperature rise not more than 5°C from
ambient,interconnections, connections with 14% detuned reactor and heavy duty 525 V ISI marked Impregnated MPP(Metalized
Polypropylene) Capacitor (IS 13340 Part -1 & 2) APFC Panel shall be in compliance with IS :16636 & CPWD Specifications etc. as per
below details. (A) Incomers Suitable capacity MCCB/ACB (Upto 300 KVAR, MCCB and above 300 KVAR, ACB ) Microprocessor base with
MAIN LT PANEL TTA TYPE AS PER IEC-61439
Design, manufacture, supply ,installation, inspection, handling, assembling, affecting proper connections, testing and commissioning of
14 SWG CRCA sheet steel fabricated cubical type Main L.T. Panel with load manager, floor mounting, dust & vermin proof, front operated
construction, enclosure class - IP 54. The bubsbar shall be of aluminium.
The main LT panel shall be as per IEC439 (TTA). All ACB's (EDO Type) shall have inbuilt microprocesor based Over load protection (L),
Short Circuit protection (S), Instantaneous Short Circuit protection (I), Earth Fault protection (G), Shunt Trip releases. All ACB should have
Ics=Icu=Icw=50 KA for 1 sec.All ACB shall be supplied with all standard accessories i.e. auxillary switch with 4NO + 4NC contacts, cradle,
handle, safety shutter in confirmity with IS:60947. All ACB Incomer shall be 4P,EDO,LSIG ,with display and communication module for real
data assessment like events,fault and all current parameters. The ACB shall be electrically and mechanically interlocked with the bus
coupler, DG incomers and other transformer incomers. All MCCB shall be microprocessor based with inbuilt OL,SC,EF protections with
rotary handle, phase barriers, spreader terminals & pad locking arrangement, with adjustable O/L & adjustable S/C trip setting as per Rupees Sixty Five
load requirement. All TP MCCB shall be with heavy duty solid isolable neutral link. The instrument chamber shall be separate and shall Lakh Only
comprise of flush type ammeter, voltmeter, selector switches, cast resin type CT's & PT's, etc. Separate CT's shall be provided for
protective and measuring system and for APFCR of capacitor bank with suitable VA. Each section of Panel shall have door opearted light
of sufficent lux to illumunate that section & each section of capacitor, buscoupler, all ACBs sections shall have exhaust fans for
ventilation purpose, electromechnical interlocking between incoming breaker and buscoupler. Each section of panel shall be provided
with space heater alonwith thermostate and suitable arrangment for automatic operation. All Energy Analyser / TVM Shall have RS
Modbus RTU on board Communication protocol for SCADA communication. Energy analyser (digital type) consisting of I, V, KW, KWH,
KVA, PF, HZ, MDI (EM 6400 of Conzerve or equi.) with RS 485 communication port for communication / report generation. (or Dual
Power factor meter. Frequency meter.
3 Nos. LED type phase indicating lamps, each lamp shall be with bakup MCB along with hooter, auxillary relay, 2 sets of push buttons.
Schedule B Page 59 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
DG SYNCRONIZATION LT PANEL AS PER CPRI
Design, manufacture, supply ,installation, inspection, handling, assembling, affecting proper connections, testing and commissioning of
14 SWG CRCA sheet steel fabricated cubical type Main L.T. Panel with load manager, floor mounting, dust & vermin proof, front operated
construction, enclosure class - IP 54. The bubsbar shall be of aluminium.
The main LT panel shall be as per CPRI. All ACB's (EDO Type) shall have inbuilt microprocesor based Over load protection (L), Short Circuit
protection (S), Instantaneous Short Circuit protection (I), Earth Fault protection (G), Shunt Trip releases. All ACB should have
Ics=Icu=Icw=50 KA for 1 sec.All ACB shall be supplied with all standard accessories i.e. auxillary switch with 4NO + 4NC contacts, cradle,
handle, safety shutter in confirmity with IS:60947. All ACB Incomer shall be 4P,EDO,LSIG ,with display and communication module for real
data assessment like events,fault and all current parameters. The ACB shall be electrically and mechanically interlocked with the bus
coupler, incomers. All MCCB shall be microprocessor based with inbuilt OL,SC,EF protections with rotary handle, phase barriers, spreader
309 1.00 Ea. 28,50,000.00 Eight Lakh Fifty
terminals & pad locking arrangement, with adjustable O/L & adjustable S/C trip setting as per load requirement. All TP MCCB shall be
with heavy duty solid isolable neutral link. The instrument chamber shall be separate and shall comprise of flush type ammeter,
voltmeter, selector switches, cast resin type CT's & PT's, etc. Separate CT's shall be provided for protective and measuring system and for
APFCR of capacitor bank with suitable VA. Each section of Panel shall have door opearted light of sufficent lux to illumunate that section
& each section of capacitor, buscoupler, all ACBs sections shall have exhaust fans for ventilation purpose, electromechnical interlocking
between incoming breaker and buscoupler. Each section of panel shall be provided with space heater alonwith thermostate and suitable
arrangment for automatic operation. All Energy Analyser / TVM Shall have RS 485 Modbus RTU on board Communication protocol for
SCADA communication.
DG SYNCRONIZATION PANEL AS PER ATTACHED SLD.
ELECTRICAL SAFETY EQUIPMENT Rupees Sixty Nine
310 10.00 Providing and erecting metallic vitrified danger notice board as per language suggested by engineer incharge for MEDIUM VOLTAGE EA 69.69 and Sixty Nine Paise
installation to be erected as per IS-2551. Only
Providing and erecting metallic vitrified danger notice board as per language suggested by engineer incharge for HIGH VOLTAGE Rupees Eighty One
311 10.00 installation to be erected as per IS.-2551. EA 81.81 and Eighty One Paise
Providing & erecting Medium Voltage Danger Notice Board sticker as per language suggested by engineer incharge of standard size as per Rupees Twenty Six
312 10.00 IS-2551 EA 26.26 and Twenty Six Paise
Providing & erecting High Voltage Danger Notice Board sticker as per language suggested by engineer incharge of standard size-as per IS Rupees Thirty Five
313 10.00 2551 EA 35.35 and Thirty Five Paise
Providing and fixing printed instruction chart both in English and Gujarati and duly framed with front glasses, for treatment of person Rupees One
suffering from Electric shock with minimum 50" diagonally size. Hundred Thirty and
Twenty Nine Paise
Providing pair of rubber hand gloves suitable for working on 11 KV/22 KV supply. Rupees Two
Hundred Fourteen
and Twelve Paise
Supplying rubber matting of following thickness as per IS:15652/IEC 61111 Rupees One
(b)4mm Thousand Twenty
316 20.00 Sq.Mtr 1,027.17 Seven and
Seventeen Paise
Schedule B Page 60 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
Supplying rubber matting of following thickness as per IS:15652/IEC 61111 Rupees Three
(c)12mm Thousand Eighty
One and Fifty One
Supplying stand first AID box with antiseptic cream, medicine for use on wounds due burn, crepe bandage, gauge bandage, medicated Rupees Two
ready to use bandage (Band-aid) adhesive tape for medicinal user, Scissors, anti-septic solution (Savlon or similar) etc. (All above contents Hundred Ninety
shall be of standard makes) Nine and Ninety
Seven Paise Only
Supplying FIRE bucket round bottom of 9 litres capacity made out of 24 gauge G.I. sheet with extra handle at bottom duly painted white Rupees Two
inside and Red out side with FIRE mark, filled with dry-sand and kept on existing stand provided or hung on wall hook. Hundred Fourteen
and Twelve Paise
Supplying and erecting floor mounting stand for keeping four nos. of FIRE buckets comprising 1500 mm in length, 900 mm height frame Rupees Nine
made out of 30mm X30 mm X 4 mm angle iron with cross supports for legs, welded with 4 hooks and duly painted with one coat of red Hundred Forty Two
lead and two coats of approved enamelled silver paint. and Thirty Three
Supplying & erecting D.C.P. type fire extinguisher for following capacity cartridge type with gun metal cap 150 gram CO2 gas cartridge,
powder and brackets confirming to IS 2171 1985 and complete erected with necessary clamps made from 50 x 6 mm M S Flat with nuts
321 10.00 and bolts grouted in wall complete. Ea. 1,712.96
Hundred Twelve and
[A] For 5 Kg Capacity
Ninety Six Paise Only
Supplying & erecting D.C.P. type fire extinguisher for following capacity cartridge type with gun metal cap 150 gram CO2 gas cartridge,
powder and brackets confirming to IS 2171 1985 and complete erected with necessary clamps made from 50 x 6 mm M S Flat with nuts
322 10.00 and bolts grouted in wall complete. Ea. 2,226.04
Hundred Twenty Six
[B] For 10 KG Capacity
and Four Paise Only
Supplying & erecting carbon dioxide (CO2) fire extinguisher user of following capacity with necessary clamps made from 50 x 6 mm M.S. Rupees Six
Flat with nut & bolts grouted in wall complete. Thousand Five
323 10.00 [A] For 4.5 Kg Capacity Ea. 6,591.26 Hundred Ninety One
and Twenty Six Paise
Supplying & erecting carbon dioxide (CO2) fire extinguisher user of following capacity with necessary clamps made from 50 x 6 mm M.S. Rupees Eight
Flat with nut & bolts grouted in wall complete. Thousand Six
324 10.00 [B] For 5.5 / 6.5 KG Capacity Ea. 8,671.86 Hundred Seventy
One and Eighty Six
Supplying & erecting ABC powder type 'Ceasefire' type Fire extinguisher as per IS 13849 or 1 Kg capacity with necessary clamp for erection
325 10.00 Ea 848.40 Hundred Forty Eight
and Forty Paise Only
Supply, Installation, Testing & Commissioning of Automatic Fire Extinguisher, Clean Agent Type, Ceiling Mounted, Capacity 5 Kg, MS Body, Rupees Twelve
326 10.00 Red Colour, complete with mounting accessories, clamps, brackets and all necessary hardware as required for proper installation and Ea 12,500.00 Thousand Five
commissioning. Hundred Only
Schedule B Page 61 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
Providing & erecting weather proof, dust & vermin proof, floor mounted front operated indoor type cubical panel board necessary IP-42
and above protection as per approval from engineer incharge made from 14 SWG thick CRC M.S. sheet for outer body & doors, 16 SWG
thick CRC M.S.sheet for internal partitions with necessary accesories , supporting angles/ flats channel including cutting, bending,
drilling, welding, riveting with internal partitions & cable alley as per requirements & instruction of engineer-in-charge with erection of
supplied switch gears, BUSBARS, suitable size of inter connecting PVC copper wire / copper-aluminium strips, rubber grommets, rib,
Rupees Fourteen
bakelite control fuses/MCB for measuring instruments, earth bus & earth bolts, foundation flange - bolts-base Plates, sufficient nos. of
327 20.00 hinged doors, handles with locking arrangement and rubber gasket,heavy duty end terminal connection,danger notice board,necessary Sq.Mtr 14,902.55
Hundred Two and
ventilation,earthing strip complete. The Panel shall be painted with epoxy powder coating. (The rates excludes the cost of switchgears,
Fifty Five Paise Only
bus bars, inter connecting mains & Copper Aluminium strips, meters, Fuses etc. The dimension shall be measured excluding base beams)
The panel shall be supplied with following approved manufacturers with following size.
(B) The standard companies switch gear shall be used and only manufacturers at CPRI approved factory
(i) with 350mm depth
Providing & erecting weather proof, dust & vermin proof, floor mounted front operated indoor type cubical panel board necessary IP-42
and above protection as per approval from engineer incharge made from 14 SWG thick CRC M.S. sheet for outer body & doors, 16 SWG
thick CRC M.S.sheet for internal partitions with necessary accesories , supporting angles/ flats channel including cutting, bending,
drilling, welding, riveting with internal partitions & cable alley as per requirements & instruction of engineer-in-charge with erection of
supplied switch gears, BUSBARS, suitable size of inter connecting PVC copper wire / copper-aluminium strips, rubber grommets, rib, Rupees Nineteen
bakelite control fuses/MCB for measuring instruments, earth bus & earth bolts, foundation flange - bolts-base Plates, sufficient nos. of Thousand Three
328 15.00 hinged doors, handles with locking arrangement and rubber gasket,heavy duty end terminal connection,danger notice board,necessary Sq.Mtr 19,387.96 Hundred Eighty
ventilation,earthing strip complete. The Panel shall be painted with epoxy powder coating. (The rates excludes the cost of switchgears, Seven and Ninety Six
bus bars, inter connecting mains & Copper Aluminium strips, meters, Fuses etc. The dimension shall be measured excluding base beams) Paise Only
The panel shall be supplied with following approved manufacturers with following size.
(B) The standard companies switch gear shall be used and only manufacturers at CPRI approved factory
(ii) with 550 mm. Depth
Providing & erecting weather proof, dust & vermin proof, floor mounted front operated indoor type cubical panel board necessary IP-42
and above protection as per approval from engineer incharge made from 14 SWG thick CRC M.S. sheet for outer body & doors, 16 SWG
thick CRC M.S.sheet for internal partitions with necessary accesories , supporting angles/ flats channel including cutting, bending,
drilling, welding, riveting with internal partitions & cable alley as per requirements & instruction of engineer-in-charge with erection of
supplied switch gears, BUSBARS, suitable size of inter connecting PVC copper wire / copper-aluminium strips, rubber grommets, rib,
Rupees Thirty Three
bakelite control fuses/MCB for measuring instruments, earth bus & earth bolts, foundation flange - bolts-base Plates, sufficient nos. of
329 8.00 hinged doors, handles with locking arrangement and rubber gasket,heavy duty end terminal connection,danger notice board,necessary Sq.Mtr 33,562.30
Hundred Sixty Two
ventilation,earthing strip complete. The Panel shall be painted with epoxy powder coating. (The rates excludes the cost of switchgears,
and Thirty Paise Only
bus bars, inter connecting mains & Copper Aluminium strips, meters, Fuses etc. The dimension shall be measured excluding base beams)
The panel shall be supplied with following approved manufacturers with following size.
(B) The standard companies switch gear shall be used and only manufacturers at CPRI approved factory
(iii) with 750 mm. Depth
Schedule B Page 62 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
Providing & erecting weather proof, dust & vermin proof, floor mounted front operated indoor type cubical panel board necessary IP-42
and above protection as per approval from engineer incharge made from 14 SWG thick CRC M.S. sheet for outer body & doors, 16 SWG
thick CRC M.S.sheet for internal partitions with necessary accesories , supporting angles/ flats channel including cutting, bending,
drilling, welding, riveting with internal partitions & cable alley as per requirements & instruction of engineer-in-charge with erection of
supplied switch gears, BUSBARS, suitable size of inter connecting PVC copper wire / copper-aluminium strips, rubber grommets, rib, Rupees Forty
bakelite control fuses/MCB for measuring instruments, earth bus & earth bolts, foundation flange - bolts-base Plates, sufficient nos. of Thousand Nine
330 5.00 hinged doors, handles with locking arrangement and rubber gasket,heavy duty end terminal connection,danger notice board,necessary Sq.Mtr 40,999.94 Hundred Ninety
ventilation,earthing strip complete. The Panel shall be painted with epoxy powder coating. (The rates excludes the cost of switchgears, Nine and Ninety
bus bars, inter connecting mains & Copper Aluminium strips, meters, Fuses etc. The dimension shall be measured excluding base beams) Four Paise Only
The panel shall be supplied with following approved manufacturers with following size.
(B) The standard companies switch gear shall be used and only manufacturers at CPRI approved factory
(iv) with 1000 mm. depth
Supplying and erecting triple pole & neutral 440V/ 500V panel mounting Aluminium Busbars with four equal Nos. of bus having current
density not more than 0.8 Amp. / sq.mm (Rated current / cross section area) duly wrapped with colour insulating tape for phase Rupees Six Hundred
331 10.00 sequence of following current carrying capacity, erected with necessary bus bar supports /insulators, main cable socket to each Rn.Mtr 660.54 Sixty and Fifty Four
busbar,erected in existing cubical panel with necessary connections. Paise Only
(A) Suitable for 100 Amp. Capacity
Supplying and erecting triple pole & neutral 440V/ 500V panel mounting Aluminium Busbars with four equal Nos. of bus having current
density not more than 0.8 Amp. / sq.mm (Rated current / cross section area) duly wrapped with colour insulating tape for phase
Thousand Thirty
332 20.00 sequence of following current carrying capacity, erected with necessary bus bar supports /insulators, main cable socket to each Rn.Mtr 1,037.27
Seven and Twenty
busbar,erected in existing cubical panel with necessary connections.
Seven Paise Only
(B) Suitable for 200 Amp. Capacity
Supplying and erecting triple pole & neutral 440V/ 500V panel mounting Aluminium Busbars with four equal Nos. of bus having current Rupees One
density not more than 0.8 Amp. / sq.mm (Rated current / cross section area) duly wrapped with colour insulating tape for phase Thousand Four
333 8.00 sequence of following current carrying capacity, erected with necessary bus bar supports /insulators, main cable socket to each Rn.Mtr 1,469.55 Hundred Sixty Nine
busbar,erected in existing cubical panel with necessary connections. and Fifty Five Paise
(C) Suitable for 300 Amp. Capacity Only
Supplying and erecting triple pole & neutral 440V/ 500V panel mounting Aluminium Busbars with four equal Nos. of bus having current Rupees Two
density not more than 0.8 Amp. / sq.mm (Rated current / cross section area) duly wrapped with colour insulating tape for phase Thousand Two
334 10.00 sequence of following current carrying capacity, erected with necessary bus bar supports /insulators, main cable socket to each Rn.Mtr 2,204.83 Hundred Four and
busbar,erected in existing cubical panel with necessary connections. Eighty Three Paise
(D) Suitable for 400 Amp. Capacity Only
Supplying and erecting triple pole & neutral 440V/ 500V panel mounting Aluminium Busbars with four equal Nos. of bus having current
density not more than 0.8 Amp. / sq.mm (Rated current / cross section area) duly wrapped with colour insulating tape for phase
Thousand Sixty One
335 8.00 sequence of following current carrying capacity, erected with necessary bus bar supports /insulators, main cable socket to each Rn.Mtr 3,061.31
and Thirty One Paise
busbar,erected in existing cubical panel with necessary connections.
(E) Suitable for 630 Amp. capacity
Supplying and erecting triple pole & neutral 440V/ 500V panel mounting Aluminium Busbars with four equal Nos. of bus having current Rupees Six
density not more than 0.8 Amp. / sq.mm (Rated current / cross section area) duly wrapped with colour insulating tape for phase Thousand Two
336 5.00 sequence of following current carrying capacity, erected with necessary bus bar supports /insulators, main cable socket to each Rn.Mtr 6,240.79 Hundred Forty and
busbar,erected in existing cubical panel with necessary connections. Seventy Nine Paise
(F) Suitable for 800 Amp. capacity Only
Schedule B Page 63 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
Supplying and erecting triple pole & neutral 440V/ 500V panel mounting Aluminium Busbars with four equal Nos. of bus having current
density not more than 0.8 Amp. / sq.mm (Rated current / cross section area) duly wrapped with colour insulating tape for phase
sequence of following current carrying capacity, erected with necessary bus bar supports /insulators, main cable socket to each
337 5.00 Rn.Mtr 7,957.79 Hundred Fifty Seven
busbar,erected in existing cubical panel with necessary connections.
and Seventy Nine
(G) Suitable for 1200 Amp.capacity
Supplying & erecting IP 55 grade following size section pillar fabricated from joint less M.S. Sheet with angle iron legs made from jointless
M.S. Angle with cable clamps to be buried in ground to have appropriate erection to work uniform until erected with cement concrete
foundation and 45 cm high bricks work finishing with plaster etc. hinged double door internally supported on both side, with internal and Rupees Sixteen
outside looking arrangement with look and keys in duplicate 35 x 35 x 5 mm M.S. Angle of Two Nos. one is welded and other with nut and Thousand Six
338 1.00 bolt for erecting Bakelite sheet. Painting the Section Pillar inside and out side with three tank powder coated paint. section pillar roof Ea. 16,691.26 Hundred Ninety One
should be without joint with water leakage proof & tested as per IP 55 test & followed by IS 2147 of 1962 and Twenty Six Paise
(A) 150 X 90 X 75 cm section pillar fabricated from 14 Gauge MS Sheet with angle iron legs 95 cm long made from 40 X 40 X 6 mm thick MS Only
Supplying & erecting approved make Digital time switch having lithium cell 6 years operative and operate battery backup 1 channel day Rupees Three
clock with 14 memory programme, suitable to operate on 240V + 5%, 16A with, floating contacts Minimum switching setup time 1 Thousand One
339 1.00 minimum & LCD display. Also comprised permanent ON/OFF switching. Programming switches & housed in fire proof thermoplastic Ea. 3,168.37 Hundred Sixty Eight
enclosure & transparent cover erected as required with necessary connection erected as directed. and Thirty Seven
Supplying & erecting power contactor, AC3 duty for time switch complete erected as per direction Cat III Rupees Two
(D) 4 pole 440V 40 Amp. Thousand Seven
340 1.00 Ea. 2,782.55 Hundred Eighty Two
and Fifty Five Paise
Supplying and erecting approved make panel mounting type Digital Voltmeter having 3 digits LED display, 0 to 750 AC Volts range Rupees One
erected on existing panel board with all connection, wiring etc. with manufacturers calibration certificate. Thousand Two
341 83.00 Ea. 1,275.63 Hundred Seventy
Five and Sixty Three
Supplying and erecting approved make panel mounting type Digital Ammeter having 3 digits LED display, external CT operated, Rupees One
calibrated for 0 to 1000 Amps suitable to operate on 500 Volt AC, erected on existing panel board with all connection, wiring etc .with Thousand Five
342 83.00 manufacturers calibration certificate. Ea. 1,558.43 Hundred Fifty Eight
and Forty Three
Supplying and erecting approved make Analog type moving iron C.T operated Ammeter A C Current suitable slide in scale 0- 400 Amp. Rupees One
with 3 Nos. of Current Transformer erected on panel board with connections. Thousand Five
343 249.00 Ea. 1,584.69 Hundred Eighty Four
and Sixty Nine Paise
Supplying & erecting approved make Power Factor Meter 150mm dia flush/projection type/ balanced & unbalanced load to work with
appropriately provided CT’s 100/5A to 400/5A ratio & other accessories complete erected in M.S. box & connected to the circuit by
344 10.00 means of PVC copper Core leads. Ea. 5,102.52
Hundred Two and
Fifty Two Paise Only
Schedule B Page 64 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
Supplying and erecting approved make suitable panel indicator LED type lamp, lens cover, complete erected with necessary connections. Rupees Forty Three
345 498.00 Ea. 43.43 and Forty Three
AUTOMATIC FIRE DETECTION SUPPRESSION SYSTEM FOR ELECTRICAL PANELS
Supply, fixing, testing and commissioning of automatic Linear pneumatic Tube Detection based NOVEC1230/FK-5-1-2 Clean Agent System
Rupees Eighty Two
for Electrical Panels (Linear Pnuematic Heat Detection Tube Panel Protection System), consisting of the Mentioned components
346 10.00 4 Kg capacity Novec 1230/FK-5-1-12 (ref NFPA 2001 edition 2018 ) , DLP Assembly with automatic valve, push in connector for tube, 4 Kg Ea 82,870.00
Hundred Seventy
Novec 1230/FK-5-1-12 (ref NFPA 2001 edition 2018 ) Clean agent , mounting bracket, End of Line adopter and low pressure switch for
monitoring system activation.
Supply, fixing, testing and commissioning of automatic Linear pneumatic Tube Detection based NOVEC1230/FK-5-1-2 Clean Agent System
for Electrical Panels (Linear Pnuematic Heat Detection Tube Panel Protection System), consisting of the Mentioned components Rupees One
347 100.00 Linear Pneumatic Heat detection tube with all necessary & supports MTR 1,400.00 Thousand Four
Supply, fixing, testing and commissioning of automatic Linear pneumatic Tube Detection based NOVEC1230/FK-5-1-2 Clean Agent System
for Electrical Panels (Linear Pnuematic Heat Detection Tube Panel Protection System), consisting of the Mentioned components
348 10.00 Master Control Unit for controlling each system, complete with pressure switches, buzzers and electronic hooters, including all necessary Ea 6,720.00
accessories + electrical wiring to make each entire system functional.
(f)1600 Amp. capacity
Providing and erecting sandwitched type bus duct having following specification : Sandwich type busbar for use as Feeder Busbar for
interconnection between separate electrical equipment/ load centers, and for use as Plug in busbar risers. The busbar shall be suitable
for operation in a 690V / 1000 V system with frequency of 50 Hz .System can be either earthed or unearthed. Impulse voltage should be
12 KV. Standards: The busbar shall be designed and manufactured in accordance with the following international standards for busbar
trunking. -IS 8623/ 1993 Part I & II : Particular requirements of busbar trunking System -IEC 61439 Part I & VI : Particular requirements of
busbar trunking System -IEC- 60529 : Degree of protection TESTING The busbars shall be type tested at a reputable national /
International test laboratory (ASTA or CPRI) for short circuit withstand. The test shall be for a minimum duration of one second. • Degree
of ingress protection (IP rating) shall also be tested at any reputed independent laboratory. This test shall be for IP 55 for Indoor and IP
for Outdoor application. • Short circuit and Degree of protection type test reports will be submitted for vThe bsubars shall be of high Rupees Sixteen
349 120.00 conductivity Copper of 99.9% pure ETP grade and high conductivity Aluminium of 99.59% pure 19501 grade. Where as earth conductor is Mtr. 16,820.54
required, it shall be separate external earth conductor, of high conductivity aluminium. Cross section of Earth Conductor shall be as per Hundred Twenty and
IEC 60439. It should be possible to provide a 200% Neutral where specified. Phase cross over box should have busbars crossing over each Fifty Four Paise Only
other not cables. The busbars shall be individually insulated with 2 layers of insulating film. Layers of POLYSTER material class ‘F’, 155ºC.
The housing shall be made of 1.6 mm electrogalvanised sheet steel, with an epoxy powder coated paint finish of RAL 7032 grade.
Alternatively Aluminum casing of 2.5mm may also be provided. The housings shall be profiled, to provide higher strength and efficient
heat dissipation. The width of the housings shall be same for all ratings of busbars, in order to provide interchangeability of tap off boxes.
The joints between sections shall be made so as to provide flexibility during installation and expansion / contraction of busbar during
operation. The joints shall be of the single bolt type. The joint construction must have the following features. a) Thermal expansion of
Busbars at joint of at least 4 mm per joint. b) The joint insulation must be of one piece moulded design and not have any cut edges which
can absorb moisture. c) Joint assembly shall be removable as separate sub-assembly so that it can be inserted or removed without
disturbing the adjacent sections. d) The joint system must be designed in a way that the installer cannot insert the busduct length too far
Schedule B Page 65 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
(g)2000 Amp. capacity
Providing and erecting sandwitched type bus duct having following specification : Sandwich type busbar for use as Feeder Busbar for
interconnection between separate electrical equipment/ load centers, and for use as Plug in busbar risers. The busbar shall be suitable
for operation in a 690V / 1000 V system with frequency of 50 Hz .System can be either earthed or unearthed. Impulse voltage should be
12 KV. Standards: The busbar shall be designed and manufactured in accordance with the following international standards for busbar
trunking. -IS 8623/ 1993 Part I & II : Particular requirements of busbar trunking System -IEC 61439 Part I & VI : Particular requirements of
busbar trunking System -IEC- 60529 : Degree of protection TESTING The busbars shall be type tested at a reputable national /
International test laboratory (ASTA or CPRI) for short circuit withstand. The test shall be for a minimum duration of one second. • Degree
of ingress protection (IP rating) shall also be tested at any reputed independent laboratory. This test shall be for IP 55 for Indoor and IP
for Outdoor application. • Short circuit and Degree of protection type test reports will be submitted for vThe bsubars shall be of high Rupees Twenty
350 80.00 conductivity Copper of 99.9% pure ETP grade and high conductivity Aluminium of 99.59% pure 19501 grade. Where as earth conductor is Mtr. 20,543.40
required, it shall be separate external earth conductor, of high conductivity aluminium. Cross section of Earth Conductor shall be as per Hundred Forty Three
IEC 60439. It should be possible to provide a 200% Neutral where specified. Phase cross over box should have busbars crossing over each and Forty Paise Only
other not cables. The busbars shall be individually insulated with 2 layers of insulating film. Layers of POLYSTER material class ‘F’, 155ºC.
The housing shall be made of 1.6 mm electrogalvanised sheet steel, with an epoxy powder coated paint finish of RAL 7032 grade.
Alternatively Aluminum casing of 2.5mm may also be provided. The housings shall be profiled, to provide higher strength and efficient
heat dissipation. The width of the housings shall be same for all ratings of busbars, in order to provide interchangeability of tap off boxes.
The joints between sections shall be made so as to provide flexibility during installation and expansion / contraction of busbar during
operation. The joints shall be of the single bolt type. The joint construction must have the following features. a) Thermal expansion of
Busbars at joint of at least 4 mm per joint. b) The joint insulation must be of one piece moulded design and not have any cut edges which
can absorb moisture. c) Joint assembly shall be removable as separate sub-assembly so that it can be inserted or removed without
disturbing the adjacent sections. d) The joint system must be designed in a way that the installer cannot insert the busduct length too far
Approved make standard Draw out type 4 Pole Air circuit breaker. Having 50 kA breaking capacity with ICU=ICS=ICW (1 sec)Vsr=690 v, Rupees One Lakh
Ui=1kv ,impulse voltage=12 kv with following type of relay and accessories. Sixty Five Thousand
351 2.00 (2) Electrically operated Draw-out type (EDO) with following type of relay system. Ea. 1,65,024.91 Twenty Four and
(B) with microprocessor Release with over load, short circuit, earth fault protection (L.S.I.G.) and metering display in modular design with Ninety One Paise
LED display and Test Trip button facility, CTs and auxiliary contacts, of following current ratings Only
(i) 800Amp 50 kA Cat III
Approved make standard Draw out type 4 Pole Air circuit breaker. Having 50 kA breaking capacity with ICU=ICS=ICW (1 sec)Vsr=690 v,
Rupees One Lakh
Ui=1kv ,impulse voltage=12 kv with following type of relay and accessories.
Seventy Thousand
(2) Electrically operated Draw-out type (EDO) with following type of relay system.
352 2.00 Ea. 1,70,931.39 Nine Hundred Thirty
(B) with microprocessor Release with over load, short circuit, earth fault protection (L.S.I.G.) and metering display in modular design with
One and Thirty Nine
LED display and Test Trip button facility, CTs and auxiliary contacts, of following current ratings
(ii) 1000Amp 50 kA Cat III
Approved make standard Draw out type 4 Pole Air circuit breaker. Having 50 kA breaking capacity with ICU=ICS=ICW (1 sec)Vsr=690 v,
Rupees One Lakh
Ui=1kv ,impulse voltage=12 kv with following type of relay and accessories.
(2) Electrically operated Draw-out type (EDO) with following type of relay system.
353 3.00 Ea. 1,92,320.16 Thousand Three
(B) with microprocessor Release with over load, short circuit, earth fault protection (L.S.I.G.) and metering display in modular design with
Hundred Twenty and
LED display and Test Trip button facility, CTs and auxiliary contacts, of following current ratings
Sixteen Paise Only
(iii) 1250Amp 50 kA Cat III
Approved make standard Draw out type 4 Pole Air circuit breaker. Having 50 kA breaking capacity with ICU=ICS=ICW (1 sec)Vsr=690 v,
Rupees Two Lakh
Ui=1kv ,impulse voltage=12 kv with following type of relay and accessories.
Five Thousand Three
(2) Electrically operated Draw-out type (EDO) with following type of relay system.
354 6.00 Ea. 2,05,321.89 Hundred Twenty
(B) with microprocessor Release with over load, short circuit, earth fault protection (L.S.I.G.) and metering display in modular design with
One and Eighty Nine
LED display and Test Trip button facility, CTs and auxiliary contacts, of following current ratings
(ii) 1600Amp 50 kA Cat III
Schedule B Page 66 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
Approved make standard Draw out type 4 Pole Air circuit breaker. Having 50 kA breaking capacity with ICU=ICS=ICW (1 sec)Vsr=690 v, Rupees Two Lakh
Ui=1kv ,impulse voltage=12 kv with following type of relay and accessories. Forty Seven
(2) Electrically operated Draw-out type (EDO) with following type of relay system. Thousand Two
(B) with microprocessor Release with over load, short circuit, earth fault protection (L.S.I.G.) and metering display in modular design with Hundred Forty Five
LED display and Test Trip button facility, CTs and auxiliary contacts, of following current ratings and Ninety Eight
(ii) 2000Amp 50 kA Cat III Paise Only
Approved make standard Draw out type 4 Pole Air circuit breaker. Having 50 kA breaking capacity with ICU=ICS=ICW (1 sec)Vsr=690 v, Rupees Two Lakh
Ui=1kv ,impulse voltage=12 kv with following type of relay and accessories. Eighty Four
(2) Electrically operated Draw-out type (EDO) with following type of relay system. Thousand Three
(B) with microprocessor Release with over load, short circuit, earth fault protection (L.S.I.G.) and metering display in modular design with Hundred Seventy
LED display and Test Trip button facility, CTs and auxiliary contacts, of following current ratings Five and Sixty Paise
(vi) 2500 Amp 60kA Cat III Only
Approved make standard Draw out type 4 Pole Air circuit breaker. Having 50 kA breaking capacity with ICU=ICS=ICW (1 sec)Vsr=690 v,
Rupees Three Lakh
Ui=1kv ,impulse voltage=12 kv with following type of relay and accessories.
Forty Four Thousand
(2) Electrically operated Draw-out type (EDO) with following type of relay system.
357 3.00 Ea. 3,44,890.76 Eight Hundred
(B) with microprocessor Release with over load, short circuit, earth fault protection (L.S.I.G.) and metering display in modular design with
Ninety and Seventy
LED display and Test Trip button facility, CTs and auxiliary contacts, of following current ratings
(vii) 3200 Amp 75kA Cat III
MOULDED CASE CIRCUIT BREAKERS Rupees Six
Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 25 KA. at 415 V,having Thousand Seven
358 20.00 normal current rating up to 25 A to 100A. with Fixed thermal & magnetic release suitable to work on A.C. supply 50 c/s. with all internal Ea. 6,790.23 Hundred Ninety and
connections, spreader tinned copper & complete erected in existing 16 G.M.S. housing. Twenty Three Paise
ICS=100% of ICU only Cat III Only
Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 35 KA. at 415 V. having Rupees Eight
normal current rating 125A. with Fixed thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all internal connections, Thousand Eight
359 20.00 spreader tinned copper & complete erected in existing 16 G.M.S. housing. Ea. 8,861.74 Hundred Sixty One
ICS=100% of ICU only Cat III and Seventy Four
Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 35 KA. at 415 V. having
Rupees Seventeen
Normal current rating 200A.with variable Thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all internal connections,
spreader tinned copper & complete erected in existing 16 G.M.S.housing
360 5.00 Ea. 17,843.67 Hundred Forty Three
ICS=100% of ICU only Cat III
and Sixty Seven
Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 35 KA. and above at 415 V
. having normal current rating 250A. with variable thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all internal
361 10.00 connections, spreader tinned copper & complete erected in existing 16 G.M.S. housing. ICS=100% of ICU only Cat III Ea. 23,041.13
Thirteen Paise Only
Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 50 KA and above at 415 V
having Normal current rating 400A. with variable Thermal & magnetic release suitable to work on A.C.supply 50 c/s. With all internal
connections, spreader tinned copper & complete erected in existing 16 G.M.S. housing. ICS=100% of ICU only Cat III
362 10.00 Ea. 27,751.77 Seven Hundred Fifty
One and Seventy
Seven Paise Only
Schedule B Page 67 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 50 K.A. and above at 415 Rupees Thirty
V having normal current rating up to 630A. with variable thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all Thousand Nine
363 8.00 internal connections, spreader tinned copper & complete erected in existing 16 G.M.S. housing ICS=100% of ICU only Cat III Ea. 30,991.85 Hundred Ninety One
and Eighty Five Paise
Miniature Circuit Breake Rupees One
providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to operate on 240 V A.C. system and having breaking Hundred Twenty
capacity 10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark Three and Twenty
Cat.III Two Paise Only
Providing & erecting 240 V MCB double pole switch for motor & inductive load (C Curve) having 10 KA breaking capacity & confirms to IS Rupees Three
: 8828 in existing box having following capacity Hundred Twenty
(A) 6 to 32 Amp. Cat-III Nine and Twenty Six
Providing & erecting 240 V MCB double pole switch for motor & inductive load (C Curve) having 10 KA breaking capacity & confirms to IS Rupees Three
: 8828 in existing box having following capacity Hundred Sixty Two
(B) 40 Amp. Cat-III and Fifty Nine Paise
Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 in
Rupees Six Hundred
existing box having following capacity
367 50.00 EA 655.49 Fifty Five and Forty
(a) 6 to 32 Amp. Cat.III
Nine Paise Only
Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 in Rupees Seven
existing box having following capacity Hundred Thirty Six
(b)40 Amp. Cat.III and Twenty Nine
Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 in
existing box having following capacity
369 85.00 EA 811.03 Hundred Eleven and
(c)63 Amp. Cat.III
Three Paise Only
Providing & erecting 415 V MCB three Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 in
Rupees Six Hundred
existing box having following capacity
370 8.00 EA 647.41 Forty Seven and
(a) 6 to 32 Amp. Cat.III
Forty One Paise Only
Providing & erecting 415 V MCB three Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 in Rupees Seven
371 8.00 existing box having following capacity EA 713.06 Hundred Thirteen
(b)40 Amp. Cat.III and Six Paise Only
Providing & erecting 415 V MCB three Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 in Rupees Seven
existing box having following capacity Hundred Eighty
(c)63 Amp. Cat.III Seven and Eighty
Schedule B Page 68 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
providing and erecting Approved make RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit withstand Rupees Two
capacity of 10 KA and suitable for operation on single phase 240 V,50Hz. having characteristic of quick action & tripping with all advance Thousand One
373 255.00 feature & do not incorporate any electronic component. for following Max. rating erected as directed EA 2,166.45 Hundred Sixty Six
(i) 25 Amps.DP and Forty Five Paise
providing and erecting Approved make RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit withstand
capacity of 10 KA and suitable for operation on single phase 240 V,50Hz. having characteristic of quick action & tripping with all advance
feature & do not incorporate any electronic component. for following Max. rating erected as directed
374 165.00 EA 2,458.34 Hundred Fifty Eight
(ii) 40Amps. DP
and Thirty Four Paise
Supplying & erecting approved make RCCB + MCB (Electro magnetic type only) working on residual current device having 10 KA short
circuit breaking capacity and 30 mAmp. Sensitivity & 30 mili sec. tripping time conforming to IS 12640 test knob facility trip free
mechanism operating for rated leakage at nominal ten volt, complete erected including all materials lugs screws etc. completed.
375 50.00 EA 2,383.60 Hundred Eighty
[e] 32A to 40 A, 4 Pole Three Phase
Three and Sixty Paise
Supplying & erecting approved make RCCB + MCB (Electro magnetic type only) working on residual current device having 10 KA short
circuit breaking capacity and 30 mAmp. Sensitivity & 30 mili sec. tripping time conforming to IS 12640 test knob facility trip free
mechanism operating for rated leakage at nominal ten volt, complete erected including all materials lugs screws etc. completed.
376 50.00 EA 3,117.87 Hundred Seventeen
[f] 63A, 4 pole Three Phase
and Eighty Seven
Supplying & erecting 20 Amp 10 KA ‘C Curve’ single pole MCB with 20 Amp. Plug socket, company fabricated powder coated sheet steel Rupees Five
enclosure erected as directed with connection. Hundred Seventy
[A] Metal Clad Socket with metal clad top Cat.III Nine and Seventy
Four Paise Only
Plastic enclosure fitted with DIN rail suitable for incorporating One / Two nos. MCB Rupees Fifty Two
378 50.00 EA 52.52 and Fifty Two Paise
Plastic enclosure fitted with DIN rail suitable for incorporating Three /Four nos. MCB Rupees One
379 50.00 EA 108.07 Hundred Eight and
Seven Paise Only
DISTRIBUTION BOARDS
Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link, earth
bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs should be used of
Hundred Eighty Five
380 5.00 same company of MCB to be used) suitable for Ea. 885.77
and Seventy Seven
(A) single phase incoming and horizontal single phase outgoing
(b) sheet steel double door (IP-43)
Schedule B Page 69 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link, earth
bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs should be used of
same company of MCB to be used) suitable for
381 5.00 Ea. 1,152.41 Hundred Fifty Two
(A) single phase incoming and horizontal single phase outgoing
and Forty One Paise
(b) sheet steel double door (IP-43)
Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link, earth
bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs should be used of
same company of MCB to be used) suitable for
382 5.00 Ea. 1,492.78 Hundred Ninety Two
(A) single phase incoming and horizontal single phase outgoing
and Seventy Eight
(b) sheet steel double door (IP-43)
Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link, earth
bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs should be used of
same company of MCB to be used) suitable for
383 10.00 Ea. 2,913.85 Hundred Thirteen
(B) three phase incoming and single phase horizontal type outgoing Per phase isolation type (PPI)
and Eighty Five Paise
(b) sheet steel double door
Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link, earth
bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs should be used of
same company of MCB to be used) suitable for
384 50.00 Ea. 3,412.79 Hundred Twelve and
(B) three phase incoming and single phase horizontal type outgoing Per phase isolation type (PPI)
Seventy Nine Paise
(b) sheet steel double door
Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link, earth
bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs should be used of
same company of MCB to be used) suitable for
385 60.00 Ea. 3,874.36 Hundred Seventy
(B) three phase incoming and single phase horizontal type outgoing Per phase isolation type (PPI)
Four and Thirty Six
(b) sheet steel double door
Providing and erecting Sheet Steel powder coated Vertical MCB distribution board (VTPN) - flush / surface mounted double door (IP54)
Rupees Twenty Two
fitted with insulated copper busbar, isolated neutral link, earth bar and DIN rail, confirming to IS 13032 and BS 5486-1986,IP-54 suitable
Thousand Eighty
386 2.00 for 250 AMP TPN MCCB + RCCB as incomer and three phase outgoing as per following .(The DBs should be used of same company of EA 22,088.70
Eight and Seventy
MCB to be used)
(D)12 way outgoing
INTERNAL POINT WIRING
Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated
multi strand copper wires up to 10 mtr length , in below type of pipe erected with 6A Modular type switch / bell push & accessories and
Hundred Eighty Two
387 1,950.00 earth continuity of following type, erected on PVC / Metallic/Wooden box, single mounting base frame covered with Ea. 582.77
and Seventy Seven
textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe erected, with necessary Lamp holder/ceiling rose /
H.D.Connector as directed.
(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete - Cat. III
Schedule B Page 70 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
Point wiring for Tissino / Modular secondary light point with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (green) both are of ISI marked
KV grade FRLS PVC insulated multi strand copper wires, in below type of pipe to be erected complete with earth continuity and
necessary connection with primary light with accessories erected on Metal / PVC / wooden box covered with 3 mm thick
388 3,450.00 Ea. 200.99 Hundred and Ninety
PC(Polycarbonate) / Acrylic sheet for open / concealed wiring. with necessary Lamp holder / ceiling rose / H.D.Connector as directed.
Nine Paise Only
(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete
Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (green) both are of .ISI marked 1.1 KV grade
FRLS PVC insulated multi strand copper wires erected in below type of pipe with 6A Modular type switches and following type of Rupees Seven
accessories erected on PVC / Metallic/Wooden box, single mounting base frame covered with textured / metallic/white front plate Hundred Twenty
modules erected on / in wall / ceiling as per pipe erected. with necessary batten/angle holder or ceiling rose or H.D.Connector as Five and Eighteen
directed. Paise Only
(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete Cat-III
Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated multi
strand copper wires up to 10 mtr length, in below type of pipe erected with 6A Modular type switch and hum free EME step type
electronic fan regulator mounted and accessories with earth continuity of following type erected on PVC / Metallic/Wooden box, single
390 650.00 PT. 809.01 Hundred Nine and
mounting base frame covered with textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe erected. with
necessary ceiling rose / H.D.Connector as directed.
(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete Cat. III
Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket erected on PVC / Metallic/Wooden box, single Rupees Three
391 510.00 mounting base frame covered with textured / metallic/white front plate modules erected on / in wall / ceiling with following type PT. 309.06 Hundred Nine and
accessories Cat. III Six Paise Only
Providing & erecting Switch board for Computer or electric apparatus consisting of following modular type accessories mounted with
PVC / Metallic concealed/open box with single mounting base frame covered with textured/metallic /white front plate,modules erected Rupees One
with necessary connections as directed Thousand One
392 250.00 1 no. 6A/16A universal plug-switch combined. PT. 1,133.22 Hundred Thirty
3 nos. 6A Switch Three and Twenty
3 nos. 6A 5 pin Plug Two Paise Only
For Modular Type Accessories Cat. III
Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi
strand copper wires up to 10 mtr length, in below type of pipe erected complete with Modular type switch & 5 pin Plug erected on PVC /
Rupees Six Hundred
Metallic/Wooden box covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following type
393 520.00 PT. 612.06 Twelve and Six Paise
of accessories.
[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby switchboard/mcb db board
(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete Cat. III
Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi
strand copper wires up to 10 mtr length, in below type of pipe erected complete with Modular type switch & 5 pin Plug erected on PVC / Rupees Eight
Metallic/Wooden box covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following type Hundred Ninety Four
of accessories. and Eighty Six Paise
[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb db board. Only
(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete Cat. III
Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi
strand copper wires up to 10 mtr length, in below type of pipe erected complete with Modular type switch & 5 pin Plug erected on PVC / Rupees One
Metallic/Wooden box covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following type Thousand Forty Six
of accessories. and Thirty Six Paise
[III] For 16A Plug and 16 amp switch with 2-4 sq.mm Cu. Wire with 2.5 sq.mm ( green) earthing wire from mcb d b board. Only
(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete Cat. III
Schedule B Page 71 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single mounting base frame covered
with textured / metallic/white front plate , modules erected with necessary connections as per site situation directed by Engineer In
396 50.00 Ea. 151.50 Hundred Fifty One
and Fifty Paise Only
(1)One No. SP 6 Amp. Cat.III
Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single mounting base frame covered
with textured / metallic/white front plate , modules erected with necessary connections as per site situation directed by Engineer In
397 50.00 Ea. 151.50 Hundred Fifty One
and Fifty Paise Only
(2) One No 5 pin plug Cat.III
Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single mounting base frame covered Rupees One
with textured / metallic/white front plate , modules erected with necessary connections as per site situation directed by Engineer In Hundred Eighty and
charge.vvv Seventy Nine Paise
(9) 16 Amp. SP one way switch Cat.III Only
Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single mounting base frame covered Rupees One
with textured / metallic/white front plate , modules erected with necessary connections as per site situation directed by Engineer In Hundred Ninety
charge.vvv Nine and Ninety
(10) 6/16Amp. Universal socket Cat.III Eight Paise Only
Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single mounting base frame covered
with textured / metallic/white front plate , modules erected with necessary connections as per site situation directed by Engineer In
400 100.00 Ea. 310.07 Hundred Ten and
Seven Paise Only
(13) 6A/10A/16A/20A/25A/32A Single pole Modular MCB Switch Cat.III
Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single mounting base frame covered
Rupees Twenty Five
with textured / metallic/white front plate , modules erected with necessary connections as per site situation directed by Engineer In
401 200.00 Ea. 25.25 and Twenty Five
(7) Blank Plate Single Cat-III
Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe
to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour
402 3,500.00 mtr. 78.78 Eight and Seventy
for earth continuity of following size
Eight Paise Only
(A) with medium class Rigid PVC pipe and accessories
(a) 2 wire 1.5 sq. mm
Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe
to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour Rupees One
403 12,400.00 for earth continuity of following size mtr. 104.03 Hundred Four and
(A) with medium class Rigid PVC pipe and accessories Three Paise Only
(b) 2 wire 2.5 sq. mm
providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe
to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth
Hundred Forty and
404 9,750.00 continuity of following size Rmt. 140.39
Thirty Nine Paise
(a) with medium class Rigid PVC pipe and accessories.
(a) 2 wire 4 sq. mm
providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe
to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth
Hundred Eighty Four
405 5,400.00 continuity of following size Rmt. 184.83
and Eighty Three
(a) with medium class Rigid PVC pipe and accessories.
(b) 2 wire 6 sq. mm
Schedule B Page 72 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe
to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth Rupees Two
continuity of following size (FRLS) Hundred Ninety Five
(A) with medium class Rigid PVC pipe and accessories and Ninety Three
(c) 2 wire 10 sq. mm Paise Only
(use earth wire of 4 sq.mm )
providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe
to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth
Hundred Twenty Six
407 2,400.00 continuity of following size Rmt. 226.24
and Twenty Four
(a) with medium class Rigid PVC pipe and accessories.
(g) 4 wire 4 sq. mm
providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe
to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth
Hundred Twenty Six
408 2,400.00 continuity of following size Rmt. 326.23
and Twenty Three
(a) with medium class Rigid PVC pipe and accessories.
(h) 4 wire 6 sq. mm
providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe
to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth Rupees Five
continuity of following size Hundred Thirty Two
(a) with medium class Rigid PVC pipe and accessories. and Twenty Seven
(i) 4 wire 10 sq. mm Paise Only
(use earth wire of 4 sq.mm )
providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper conductor with heat resistant PVC
insulated conforms to IS 694, IEC - 227 erected in existing pipe of following size (Specifically for control panel, relays, power switchgears, Rupees Twenty Two
410 190.00 motor starters & control wiring) with required size of copper lugs, nuts and bolts if required. Rmt. 22.22 and Twenty Two
(b) One wire 1.50 sq. mm Paise Only
providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper conductor with heat resistant PVC
insulated conforms to IS 694, IEC - 227 erected in existing pipe of following size (Specifically for control panel, relays, power switchgears, Rupees Thirty Four
411 150.00 motor starters & control wiring) with required size of copper lugs, nuts and bolts if required. Rmt. 34.34 and Thirty Four Paise
(c) One wire 2.50 sq. mm Only
providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper conductor with heat resistant PVC
insulated conforms to IS 694, IEC - 227 erected in existing pipe of following size (Specifically for control panel, relays, power switchgears, Rupees Forty Seven
412 125.00 motor starters & control wiring) with required size of copper lugs, nuts and bolts if required. Rmt. 47.47 and Forty Seven
(d) One wire 4.00 sq. mm Paise Only
providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper conductor with heat resistant PVC
insulated conforms to IS 694, IEC - 227 erected in existing pipe of following size (Specifically for control panel, relays, power switchgears,
Rupees Seventy and
413 100.00 motor starters & control wiring) with required size of copper lugs, nuts and bolts if required. Rmt. 70.70
Seventy Paise Only
(e) One wire 6.00 sq. mm
Schedule B Page 73 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper conductor with heat resistant PVC
insulated conforms to IS 694, IEC - 227 erected in existing pipe of following size (Specifically for control panel, relays, power switchgears, Rupees One
414 80.00 motor starters & control wiring) with required size of copper lugs, nuts and bolts if required. Rmt. 115.14 Hundred Fifteen and
(f) One wire 10.00 sq. mm Fourteen Paise Only
providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper conductor with heat resistant PVC
insulated conforms to IS 694, IEC - 227 erected in existing pipe of following size (Specifically for control panel, relays, power switchgears,
Hundred Seventy
415 50.00 motor starters & control wiring) with required size of copper lugs, nuts and bolts if required. Rmt. 177.76
Seven and Seventy
(g) One wire 16.00 sq. mm
providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper conductor with heat resistant PVC
insulated conforms to IS 694, IEC - 227 erected in existing pipe of following size (Specifically for control panel, relays, power switchgears,
Hundred Ninety Five
416 50.00 motor starters & control wiring) with required size of copper lugs, nuts and bolts if required. Rmt. 295.93
and Ninety Three
(h) One wire 25.00 sq. mm
Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall or ceiling erected with Rupees Thirty Three
417 6,300.00 necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in approved manner as mtr. 33.33 and Thirty Three
directed. Paise Only
Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall or ceiling erected with
Rupees Fifty Four
necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in approved manner as
418 1,250.00 mtr. 54.54 and Fifty Four Paise
Providing & erecting PVC Corrugated Flexible Conduit with required nos. of coupling, PVC bushes, Check-nuts etc. complete of following
Rupees Seventeen
419 1,585.65 mtr. 17.17 and Seventeen Paise
Providing & erecting PVC Corrugated Flexible Conduit with required nos. of coupling, PVC bushes, Check-nuts etc. complete of following Rupees Twenty One
420 700.00 sizes. mtr. 21.21 and Twenty One
(2) 25 mm Paise Only
Supplying & erecting UPVC Mini trunking (PVC Casing-n-Capping) having double-locking arrangement with grooves, trunking of size not Rupees Thirty One
421 150.00 below 12.5 mm in height as per IS with accessories of PVC/Resin polypropylene not below 1.8 mm thick duly sealed in joint & erected on mtr. 31.31 and Thirty One Paise
wall / ceiling of following size . Only
Supplying & erecting UPVC Mini trunking (PVC Casing-n-Capping) having double-locking arrangement with grooves, trunking of size not
Rupees Thirty Six
below 12.5 mm in height as per IS with accessories of PVC/Resin polypropylene not below 1.8 mm thick duly sealed in joint & erected on
422 150.00 mtr. 36.36 and Thirty Six Paise
wall / ceiling of following size .
Supplying and laying UPVC cable trunking system comprising unplasticised polyvinyl, chloride rigid material with ignition free and flame
proof confirming BS with necessary end caps Internal and external bend, flat bends, coupler, tee etc..All necessary accessories and
Hundred Seventy
423 75.00 measuring of following sizes mtr. 277.75
Seven and Seventy
(1) 75 mm x 50 mm trunking
Five Paise Only
Schedule B Page 74 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
Supplying and laying UPVC cable trunking system comprising unplasticised polyvinyl, chloride rigid material with ignition free and flame Rupees One
proof confirming BS with necessary end caps Internal and external bend, flat bends, coupler, tee etc..All necessary accessories and Thousand Three
424 75.00 measuring of following sizes mtr. 1,322.09 Hundred Twenty
(4)100 mm x 50 mm trunking with TWIN compartment With clip in divider Two and Nine Paise
Supplying under floor pregalvanised corrosion proof rectangular sheet steel cable trunking of 1.6 mm thick having with stand point load
up to 1.33 Ton & free from seepage of concrete of screed water with all accessories,Junction Box,Joints as required and demanded by
Hundred Seventy
425 150.00 engineer-incharge and laying/erecting as per OEM guidelines and as per instruction of engineer incharge having following size of mtr. 377.74
Seven and Seventy
dimensions and No of compartments (W x D x T) Cat-III
Four Paise Only
[7] 50mm x 38mm x 1.6 mm with One Compartments
Supplying under floor pregalvanised corrosion proof rectangular sheet steel cable trunking of 1.6 mm thick having with stand point load
up to 1.33 Ton & free from seepage of concrete of screed water with all accessories,Junction Box,Joints as required and demanded by
Hundred Forty Eight
426 100.00 engineer-incharge and laying/erecting as per OEM guidelines and as per instruction of engineer incharge having following size of mtr. 548.43
and Forty Three
dimensions and No of compartments (W x D x T) Cat-III
[9] 100mm x 38mm x 1.6 mm with One Compartments
Supplying under floor pregalvanised corrosion proof rectangular sheet steel cable trunking of 1.6 mm thick having with stand point load
up to 1.33 Ton & free from seepage of concrete of screed water with all accessories,Junction Box,Joints as required and demanded by
Hundred Sixty Five
427 125.00 engineer-incharge and laying/erecting as per OEM guidelines and as per instruction of engineer incharge having following size of mtr. 765.58
and Fifty Eight Paise
dimensions and No of compartments (W x D x T) Cat-III
[10] 150mm x 38mm x 1.6mm with Three Compartments
Supplying under floor pregalvanised corrosion proof rectangular sheet steel cable trunking of 1.6 mm thick having with stand point load Rupees One
up to 1.33 Ton & free from seepage of concrete of screed water with all accessories,Junction Box,Joints as required and demanded by Thousand One
428 250.00 engineer-incharge and laying/erecting as per OEM guidelines and as per instruction of engineer incharge having following size of mtr. 1,194.83 Hundred Ninety Four
dimensions and No of compartments (W x D x T) Cat-III and Eighty Three
[12] 250mm x 38mm x 1.6mm with Three Compartments Paise Only
Supplying under floor pregalvanised corrosion proof rectangular sheet steel cable trunking of 1.6 mm thick having with stand point load Rupees One
up to 1.33 Ton & free from seepage of concrete of screed water with all accessories,Junction Box,Joints as required and demanded by Thousand Three
429 150.00 engineer-incharge and laying/erecting as per OEM guidelines and as per instruction of engineer incharge having following size of mtr. 1,342.29 Hundred Forty Two
dimensions and No of compartments (W x D x T) Cat-III and Twenty Nine
[13] 300mm x 38mm x 1.6 mm with Three Compartments Paise Only
HT ARMOURED ALLUMINIUM CABLES. Rupees One
Providing and erecting ISI Marked 3core 185 Sq.mm XLPE insulated 11 KV armoured cable Aluminium conductor IS-7098 to be laid on Thousand Nine
430 200.00 wall with clamps or in provided cable trench / pipe approved manner as directed. Mtr. 1,961.42 Hundred Sixty One
and Forty Two Paise
Supplying and erecting high tension cable end box outdoor type suitable. for 11 KV 150/185Sq.mm 3core H.T. cable complete with gland Rupees Three
bushing and jointing material. Thousand Eight
431 6.00 Ea. 3,853.15 Hundred Fifty Three
and Fifteen Paise
LT ARMOURED ALLUMINIUM CABLES.
Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with
432 380.00 Mtr. 220.18 Hundred Twenty and
necessary clamps or in existing trench / pipe of following size of cables
Eighteen Paise Only
(A) 3 1/2 core 25 Sq. mm ( 16 Sq. mm 1/2 core)
Schedule B Page 75 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with Rupees Three
necessary clamps or in existing trench / pipe of following size of cables Hundred Forty One
(C) 3 1/2 core 50 Sq. mm ( 25 Sq.1/2 mm core)( 35 Sq.1/2 mm core) and Thirty Eight
Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with
necessary clamps or in existing trench / pipe of following size of cables
434 370.00 Mtr. 454.50 Hundred Fifty Four
(D) 3 1/2 core 70 Sq. mm ( 35 Sq. mm 1/2 core)
and Fifty Paise Only
Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with Rupees Five
necessary clamps or in existing trench / pipe of following size of cables Hundred Eighty Nine
(E) 3 1/2 core 95 Sq. mm ( 50 Sq. mm 1/2 core) and Eighty Four
Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with
Rupees Six Hundred
necessary clamps or in existing trench / pipe of following size of cables
436 350.00 Mtr. 648.42 Forty Eight and Forty
(F) 3 1/2 core 120 Sq. mm ( 70 Sq. mm 1/2 core)
Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with Rupees One
necessary clamps or in existing trench / pipe of following size of cables Thousand Four
437 750.00 (I) 3 1/2 core 240 Sq. mm( 120 Sq. mm 1/2 core) Mtr. 1,401.88 Hundred One and
Eighty Eight Paise
Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with Rupees One
necessary clamps or in existing trench / pipe of following size of cables Thousand Six
438 550.00 (J) 3 1/2 core 300 Sq.mm ( 150 Sq. mm 1/2 core) Mtr. 1,689.73 Hundred Eighty Nine
and Seventy Three
Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with Rupees Two
necessary clamps or in existing trench / pipe of following size of cables Thousand Ninety Six
(K) 3 1/2 core 400 Sq.mm ( 185 Sq. mm 1/2 core) and Seventy Six
Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand / Solid Aluminium conductor for 1.1 KV. to be laid on wall with Rupees One
necessary clamps or in existing trench / pipe of following size of cables. Hundred Forty and
(A) 4 core 4 Sq. mm Thirty Nine Paise
Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand / Solid Aluminium conductor for 1.1 KV. to be laid on wall with
necessary clamps or in existing trench / pipe of following size of cables.
441 3,700.00 Mtr. 151.50 Hundred Fifty One
(B) 4 core 6 Sq. mm
and Fifty Paise Only
Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with Rupees One
necessary clamps or in existing trench / pipe of following size of cables. Hundred Eighty Four
(A) 4 core 16 Sq. mm and Eighty Three
Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with Rupees Eighty Three
443 550.00 necessary clamps or in existing trench / pipe of following size of cables. Mtr. 83.83 and Eighty Three
(A) 3 core 2.5 Sq. mm Paise Only
Schedule B Page 76 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for 1.1 KV. to be laid on wall with necessary Rupees Three
clamps or in existing trench / pipe at road crossing or floor of following size of cable. Hundred Fifty Nine
(B) 3 core 4 Sq. mm and Fifty Six Paise
Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand / Solid Copper conductor for 1.1 KV. to be laid on wall with Rupees Six Hundred
necessary clamps or in existing trench / pipe at road crossing or floor of following size of cables. Thirty Seven and
(C) 4 core 6 Sq. mm Thirty One Paise
Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for 1.1 KV. to be laid on wall with Rupees Eight
necessary clamps or in existing trench / pipe at road crossing or floor of following size of cables. Hundred Forty Six
(A) 4 core 10 Sq. mm and Thirty Eight
Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for 1.1 KV. to be laid on wall with Rupees One
necessary clamps or in existing trench / pipe at road crossing or floor of following size of cables. Thousand Two
447 550.00 (B) 4 core 16 Sq. mm Mtr. 1,235.23 Hundred Thirty Five
and Twenty Three
Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going Rupees Thirty Three
448 20.00 tails, insulating tape etc for following size of cables. Ea. 33.33 and Thirty Three
(A) 2 to 4 core 2.5 / 4 Sq. mm Paise Only
Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going Rupees Thirty Eight
449 100.00 tails, insulating tape etc for following size of cables. Ea. 38.38 and Thirty Eight
(B) 2 to 4 core 6 Sq. mm Paise Only
Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going Rupees Thirty Eight
450 120.00 tails, insulating tape etc for following size of cables. Ea. 38.38 and Thirty Eight
(C) 2 to 4 core 10 Sq. mm Paise Only
Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going Rupees Forty Seven
451 20.00 tails, insulating tape etc for following size of cables. Ea. 47.47 and Forty Seven
(D) 2 to 4 core 16 Sq. mm Paise Only
Providing and, fixing heavy duty flange type brass double compression type cable gland with rubber ring for PVC insulated armoured
Rupees Sixty Six and
452 10.00 cable complete with out going tails, insulating tape etc for following size of cables. Ea. 66.66
Sixty Six Paise Only
(A) 3 & 1/2 / 4 core 25 Sq. mm
Providing and, fixing heavy duty flange type brass double compression type cable gland with rubber ring for PVC insulated armoured Rupees Seventy Five
453 100.00 cable complete with out going tails, insulating tape etc for following size of cables. Ea. 75.75 and Seventy Five
(B) 3 & 1/2 core 35/50 Sq. mm Paise Only
Providing and, fixing heavy duty flange type brass double compression type cable gland with rubber ring for PVC insulated armoured
cable complete with out going tails, insulating tape etc for following size of cables.
454 30.00 Ea. 103.02 Hundred Three and
(C) 3 & 1/2 core 70 Sq. mm
Providing and, fixing heavy duty flange type brass double compression type cable gland with rubber ring for PVC insulated armoured
cable complete with out going tails, insulating tape etc for following size of cables.
455 20.00 Ea. 131.30 Hundred Thirty One
(D) 3 & 1/2 core 95 Sq. mm
and Thirty Paise Only
Schedule B Page 77 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
Providing and, fixing heavy duty flange type brass double compression type cable gland with rubber ring for PVC insulated armoured Rupees One
cable complete with out going tails, insulating tape etc for following size of cables. Hundred Forty and
(E) 3 & 1/2 core 120 Sq. mm Thirty Nine Paise
Providing and, fixing heavy duty flange type brass double compression type cable gland with rubber ring for PVC insulated armoured Rupees Two
cable complete with out going tails, insulating tape etc for following size of cables. Hundred Forty Seven
(H) 3 & 1/2 core 240 Sq. mm and Forty Five Paise
Providing and, fixing heavy duty flange type brass double compression type cable gland with rubber ring for PVC insulated armoured Rupees Two
cable complete with out going tails, insulating tape etc for following size of cables. Hundred Eighty and
(I) 3 & 1/2 core 300 Sq. mm Seventy Eight Paise
Providing and, fixing heavy duty flange type brass double compression type cable gland with rubber ring for PVC insulated armoured Rupees Three
cable complete with out going tails, insulating tape etc for following size of cables. Hundred Sixty Nine
(J) 3 & 1/2 core 400 Sq. mm and Sixty Six Paise
Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool &
Rupees Six and Six
460 500.00 connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. Ea. 6.06
Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & Rupees Thirteen
461 550.00 connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. Ea. 13.13 and Thirteen Paise
(B) 10 Sq.mm Only
Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool &
Rupees Fifteen and
462 160.00 connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. Ea. 15.15
Fifteen Paise Only
Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool &
Rupees Twenty and
463 400.00 connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. Ea. 20.20
Twenty Paise Only
Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & Rupees Twenty Five
464 20.00 connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. Ea. 25.25 and Twenty Five
(E) 70 Sq.mm. Paise Only
Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool &
Rupees Forty and
465 50.00 connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. Ea. 40.40
Forty Paise Only
Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & Rupees Forty Five
466 50.00 connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. Ea. 45.45 and Forty Five Paise
(G) 120 Sq.mm. Only
Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & Rupees Sixty One
467 50.00 connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. Ea. 61.61 and Sixty One Paise
(H) 150 Sq.mm. Only
Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool &
Rupees Eighty and
468 80.00 connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. Ea. 80.80
Eighty Paise Only
Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & Rupees Eighty Five
469 20.00 connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. Ea. 85.85 and Eighty Five Paise
(J) 240 Sq.mm. Only
Schedule B Page 78 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & Rupees Ninety Eight
470 20.00 connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. Ea. 98.98 and Ninety Eight
(K) 300 Sq.mm. Paise Only
Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & Rupees One
471 120.00 connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. Ea. 110.09 Hundred Ten and
(L) 400 Sq.mm. Nine Paise Only
Solder less crimping type Copper lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool &
Rupees Eight and
472 60.00 connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. Ea. 8.08
Eight Paise Only
Solder less crimping type Copper lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool &
Rupees Ten and Ten
473 60.00 connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. Ea. 10.10
Solder less crimping type Copper lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool &
Rupees Twelve and
474 60.00 connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. Ea. 12.12
Twelve Paise Only
CABLE TRAY & ACCESSORIES
Providing , erecting , fabricating the M.S. structure as per requirement on site incorporating proper size of M.S. angles, flats, bars, Rupees Seventy
475 200.00 channels, sections complete with cutting, welding, grinding & finishing duly painted with one coat of redoxide with erection on site as Kg 77.77 Seven and Seventy
per direction of engineer in charge with necessary gouting, cementing, plastering & finishing complete. Seven Paise Only
Providing and fixing approved make Perforated C type cable tray. Made from pre- galvanized CR sheet steel. The cable tray should be
bended as per IS 2062/1079 . with coupler plate / Fish plate and GI hardware like nut - bolt and washers etc. erected on existing support
476 250.00 Rmt. 232.30 Hundred Thirty Two
as per Specification and as per instruction of engineer in charge...
and Thirty Paise Only
(1) 50 X 50 X 1.5 mm Thick
Providing and fixing approved make Perforated C type cable tray. Made from pre- galvanized CR sheet steel. The cable tray should be Rupees Two
bended as per IS 2062/1079 . with coupler plate / Fish plate and GI hardware like nut - bolt and washers etc. erected on existing support Hundred Seventy
as per Specification and as per instruction of engineer in charge... Four and Seventy
(2) 100 X 50 X 1.5 mm Thick Two Paise Only
Providing and fixing approved make Perforated C type cable tray. Made from pre- galvanized CR sheet steel. The cable tray should be Rupees Three
bended as per IS 2062/1079 . with coupler plate / Fish plate and GI hardware like nut - bolt and washers etc. erected on existing support Hundred Twenty
as per Specification and as per instruction of engineer in charge... Two and Nineteen
(3)150 X 50 X 1.5 mm Thick Paise Only
Providing and fixing approved make Perforated C type cable tray. Made from pre- galvanized CR sheet steel. The cable tray should be Rupees Four
bended as per IS 2062/1079 . with coupler plate / Fish plate and GI hardware like nut - bolt and washers etc. erected on existing support Hundred Seventy
as per Specification and as per instruction of engineer in charge... One and Sixty Seven
(5) 300 X 50 X 1.5 mm Thick Paise Only
Providing and fixing approved make 'T' Junction for Perforated C type cable tray. Made from pre galvanized sheet steel. The Junction
should be bended as per IS 2062/1079. with max 17.5% perforation with coupler plate / Fish plate and GI hardware like nut - bolt and
washers etc. erected on existing support as per Specification and as per instruction of engineer in charge.
480 20.00 Ea. 116.15 Hundred Sixteen and
Fifteen Paise Only
(1) 50 X 50 X 1.6 mm Thick ' T' Junction
Schedule B Page 79 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
Providing and fixing approved make 'T' Junction for Perforated C type cable tray. Made from pre galvanized sheet steel. The Junction
should be bended as per IS 2062/1079. with max 17.5% perforation with coupler plate / Fish plate and GI hardware like nut - bolt and Rupees One
washers etc. erected on existing support as per Specification and as per instruction of engineer in charge. Hundred Sixty Seven
'T' Junction and Sixty Six Paise
(3) 150 X 50 X 1.6 mm Thick ' T' Junction Only
Providing and fixing approved make '90° Elbow' for Perforated C type cable tray. Made from pre galvanized sheet steel. The Junction
Rupees Ninety Four
should be bended as per IS 2062/1079. with coupler plate / Fish plate and GI hardware like nut - bolt and washers etc. erected on
482 20.00 Ea. 94.94 and Ninety Four
existing support as per Specification and as per instruction of engineer in charge.
(1) 50 X 50 X 1.6 mm Thick 90° Elbow
Providing and fixing approved make '90° Elbow' for Perforated C type cable tray. Made from pre galvanized sheet steel. The Junction Rupees One
should be bended as per IS 2062/1079. with coupler plate / Fish plate and GI hardware like nut - bolt and washers etc. erected on Hundred Forty Six
existing support as per Specification and as per instruction of engineer in charge. and Forty Five Paise
(3) 150 X 50 X 1.6 mm Thick 90° Elbow Only
Providing and fixing approved make '90° Elbow' for Perforated C type cable tray. Made from pre galvanized sheet steel. The Junction Rupees Two
should be bended as per IS 2062/1079. with coupler plate / Fish plate and GI hardware like nut - bolt and washers etc. erected on Hundred Nineteen
existing support as per Specification and as per instruction of engineer in charge. and Seventeen Paise
(5)300 X 50 X 2 mm Thick 90° Elbow Only
Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a
heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/ aluminium die cast powder coated and high U.V. & corrosion
resistance with diffuser with company mark/name 160V to 270V, Power Factor more than 0.95, THD < 15%,
CCT 3000 K to 6500K, Rupees Two
Luminaire efficacy> 85 lumens/watt ,LED Hundred Ninety Five
LED driver efficiency > 85 % and Ninety Three
( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Paise Only
Engineer incharge may select any wattage capacity between the ranges shown.)vv
(A) Tube Light with integral driver
(iii) 18-20 Watts, Surge - 2KV,IP-20, conventional 4 feetCat-lll
Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a
heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/ aluminium die cast powder coated and high U.V. & corrosion
resistance with diffuser with company mark/name 160V to 270V, Power Factor more than 0.95, THD < 15%,
CCT 3000 K to 6500K,
Luminaire efficacy> 85 lumens/watt ,LED
LED driver efficiency > 85 %
486 480.00 Ea. 535.30 Hundred Thirty Five
( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The
and Thirty Paise Only
Engineer incharge may select any wattage capacity between the ranges shown.)vv
(A) Tube Light with integral driver
(v) 36-40 Watts, Surge-2 KV, IP-20, conventional 4 feet Cat-lll
Schedule B Page 80 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a
heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated and high U.V. &
corrosion resistance with diffuser housed in aluminium casted body with company mark/name
160V to 270V,Power Factor more than 0.9, THD < 15 %,
CCT 3000 K to 6500K,
Luminaire efficacy> 85 lumens/watt , Rupees Four
487 250.00 LED driver efficiency > 85 % Ea. 423.00 Hundred Twenty
( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Three Only
Engineer incharge may select any wattage capacity between the ranges shown.)
(A) Square/ Circular shaped Surface/Recessed Mount Downlight with provision for spring loaded mounting clips complete.IP20
(ii) 11-15 watts, Surge-2 KV Cat-lll
Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a
heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated and high U.V. &
corrosion resistance with diffuser housed in aluminium casted body with company mark/name
160V to 270V,Power Factor more than 0.9, THD < 15 %,
CCT 3000 K to 6500K,
Luminaire efficacy> 85 lumens/watt
Hundred Eighty Nine
488 1,800.00 LED driver efficiency > 85 % Ea. 589.84
and Eighty Four
( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The
Engineer incharge may select any wattage capacity between the ranges shown.)
(A) Square/ Circular shaped Surface/Recessed Mount Downlight with provision for spring loaded mounting clips complete.IP20
(iii) 20 watts, Surge-2 KV Cat-lll
Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a
heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated and high U.V. &
corrosion resistance with diffuser housed in aluminium casted body with company mark/name
160V to 270V,Power Factor more than 0.9, THD < 15 %,
CCT 3000 K to 6500K,
Luminaire efficacy> 85 lumens/watt
Hundred Fifty Eight
489 100.00 LED driver efficiency > 85 % Ea. 758.51
and Fifty One Paise
( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The
Engineer incharge may select any wattage capacity between the ranges shown.)
(A) Square/ Circular shaped Surface/Recessed Mount Downlight with provision for spring loaded mounting clips complete.IP20
(iv) 22-24 watts, Surge-2 KV Cat-lll
Schedule B Page 81 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a
heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated and high U.V. &
corrosion resistance with diffuser housed in aluminium casted body with company mark/name
160V to 270V,Power Factor more than 0.9, THD < 15 %,
CCT 3000 K to 6500K, Rupees One
Luminaire efficacy> 85 lumens/watt , Thousand Seven
LED driver efficiency > 85 % Hundred Seventy
( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Seven Only
Engineer incharge may select any wattage capacity between the ranges shown.)
(B) LED Panel Light with provision for Plane front frame with translucent cover fixed to housing complete.IP20
(vi) 36 watts, 24" x 24", Surge- 2KV Cat-lll
Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a
heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated and high U.V. &
corrosion resistance with diffuser housed in aluminium casted body with company mark/name
160V to 270V,Power Factor more than 0.9, THD < 15 %,
CCT 3000 K to 6500K,
Luminaire efficacy> 85 lumens/watt
491 1,830.00 Ea. 2,071.00 Thousand Seventy
LED driver efficiency > 85 %
( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The
Engineer incharge may select any wattage capacity between the ranges shown.)
(B) LED Panel Light with provision for Plane front frame with translucent cover fixed to housing complete.IP20
(vii) from 45 to 48 watts, 24" x 24", Surge-2 KV
Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a
heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated and high U.V. &
corrosion resistance with diffuser housed in aluminium casted body with company mark/name
160V to 270V,Power Factor more than 0.9, THD < 15 %,
CCT 3000 K to 6500K, Rupees Three
492 130.00 Luminaire efficacy> 85 lumens/watt , Ea. 312.09 Hundred Twelve and
LED driver efficiency > 85 % Nine Paise Only
( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The
Engineer incharge may select any wattage capacity between the ranges shown.)
(H) Mirror Light 9 Watts, wall mounted minimum 1 feet long.
FANS Rupees Two
Providing & erecting Approved make Ceiling Fan with double ball bearing ISI mark with Condenser 230 volt A.C.50 Hz 1200 mm sweep Thousand Three
493 650.00 complete having 3 blades aluminium body and blade sets having ornamental design shanks , canopy erected with earthing. [ Make shall Ea. 2,311.89 Hundred Eleven and
be approved by Engineer in Charge] Eighty Nine Paise
Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe down rod erected duly painted for fan complete with proper Rupees One
494 100.00 insulation without leakage and earthing. Mtr. 108.07 Hundred Eight and
Seven Paise Only
Schedule B Page 82 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
Supplying and erecting approved make oscillating type bracket fan A.C. 23OV. 50cy/s 400/450 mm sweep wall mounted with height
495 80.00 adjustment and rotary tilting device complete with guard, flexible Core plug top complete erected with lead wires as directed. Ea. 2,534.09
Hundred Thirty Four
and Nine Paise Only
Supplying & erecting single phase approved make industrial exhaust fan suitable for medium duty ring mounted low noise operation Rupees Two
suitable for medium duty having following dia size and maximum speed in RPM Thousand Fifty Four
[A] 305 mm dia 900 RPM Cat.II and Thirty Four Paise
Supplying & erecting approved make low noise decorative exhaust fan having square frame ABS body with inbuilt lowers & square frame. Rupees One
250mm with 1350 RPM Cat.II Thousand Seven
497 90.00 Ea. 1,703.87 Hundred Three and
Eighty Seven Paise
Supplying and erecting approved make double ball bearing oscillating type Heavy duty bracket fan with Aluminium Blades A.C. 23OV. Rupees Four
50cy/s wall mounted with height adjustment and rotary tilting device complete with guard, wall bracket,mounting accessories as Thousand Nine
directed. Hundred Fifty and
(A) 450mm One Paise Only
Supplying and erecting approved make Octagonal pole made from HR sheet steel. The pole should be made as per IS. and shall be coated
with hot dip galvanizing as per IS 2629/2633/4759, suitable suspend local wind speed with integral Junction box consist of terminal plate
of min 6mm Hylam sheet, standard profile 35mmX7.5mm Din-Rail for MCB Mounting, stud type terminal and arrangement for cable
499 20.00 termination to be erected With Suitable foundation (Included) as per details given by manufacturer considering site requirement. Ea. 6,111.51
Hundred Eleven and
(B) 4 Mtr. Long 70 mm Top X 130 mm bottom dia, 3 mm thickness with 200mmX200mmX12mm base plate, 4-M16 Bolts and 450mm long
Fifty One Paise Only
with necessary G.I. J Bolts .Approx weight 37 kg
Supplying and erecting approved make Octagonal pole made from HR sheet steel. The pole should be made as per IS. and shall be coated
with hot dip galvanizing as per IS 2629/2633/4759, suitable suspend local wind speed with integral Junction box consist of terminal plate Rupees Twelve
of min 6mm Hylam sheet, standard profile 35mmX7.5mm Din-Rail for MCB Mounting, stud type terminal and arrangement for cable Thousand Five
500 30.00 termination to be erected With Suitable foundation (Included) as per details given by manufacturer considering site requirement. Ea. 12,553.29 Hundred Fifty Three
(E) 7 Mtr. Long 70 mm Top X 135 mm bottom dia, 3 mm thickness with 225mmX225mmX16mm base plate, 4-M20 Bolts and 600mm long and Twenty Nine
with necessary G.I. J Bolts .Approx Pole weight 67 kg Paise Only
Providing and erecting Street Light pole bracket comprising main B Class GI pipe of 4.2 cm/require outside dia. complete with suitable B
Class G.I. sleeve tubing of approx. 45cms.length and suitable for 76.5 mm /80mm / required size of pole top having sufficient fasteners for Rupees Six Hundred
fixing the brackets and having spread of 1.5.mtr. length with 110 deg.with vertical plane & suitable welded stays, reducer and with check Eighty Three and
nuts complete painted with one coat of Red oxide / PU base primer and two coats of Aluminium / PU paint. paint with following nos of Seventy Seven Paise
[A] Single Arm Bracket 1.5 Mtr
Providing and erecting Street Light pole bracket comprising main B Class GI pipe of 4.2 cm/require outside dia. complete with suitable B
Class G.I. sleeve tubing of approx. 45cms.length and suitable for 76.5 mm /80mm / required size of pole top having sufficient fasteners for Rupees One
fixing the brackets and having spread of 1.5.mtr. length with 110 deg.with vertical plane & suitable welded stays, reducer and with check Thousand Two and
nuts complete painted with one coat of Red oxide / PU base primer and two coats of Aluminium / PU paint. paint with following nos of Ninety Three Paise
[B] Double Arm Bracket 1.5 Mtr
Schedule B Page 83 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
Supplying & erecting approved make SMC press moulded composite FRP. loop-in, loop-out approx. 2mm thick box complete with
Bakelite connector strip 5way(3P+N+E),DIN rail for mounting mob & hinged doors as per requirement having locking arrangements with
Hundred Seventy Six
503 50.00 mounting clamp with nuts, bolts & washers suitable for erection on pole with cable clamps& earth bolt of following size of box. Ea. 476.72
and Seventy Two
( c)150mm x 125mm x 100mm [deep]
Supplying and erecting LED street light / Flood light fittings with High power White LEDs wattage of 3 Watt and above assembled on single
MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die cast aluminum housing with smooth finish powder coated
and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses, with toughened glass with company mark/name
engraved or embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire
efficacy> 100 lumens/watt . LED driver efficiency > 85 %.( fittings required LM-79 & LM-80 certificates)(NOTE: Below description have
504 40.00 Ea. 5,080.30 Thousand Eighty and
shown ranges of Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity between the ranges shown.)
Thirty Paise Only
(A) Street Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC line supply with over-voltage protection.
(iii) Above 60 to 90 watts Cat-lll
Supplying and erecting LED street light / Flood light fittings with High power White LEDs wattage of 3 Watt and above assembled on single
MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die cast aluminum housing with smooth finish powder coated
and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses, with toughened glass with company mark/name
engraved or embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire
efficacy> 100 lumens/watt . LED driver efficiency > 85 %.( fittings required LM-79 & LM-80 certificates)(NOTE: Below description have
505 20.00 Ea. 5,175.24 Hundred Seventy
shown ranges of Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity between the ranges shown.)
Five and Twenty
(B) Flood Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC line supply with over-voltage protection.
Four Paise Only
(iii) Above 60 to 89 watts
Supplying and erecting LED street light / Flood light fittings with High power White LEDs wattage of 3 Watt and above assembled on single
MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die cast aluminum housing with smooth finish powder coated
and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses, with toughened glass with company mark/name
engraved or embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire Rupees Four
efficacy> 100 lumens/watt . LED driver efficiency > 85 %.( fittings required LM-79 & LM-80 certificates)(NOTE: Below description have Thousand Ninety Six
shown ranges of Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity between the ranges shown.) and Fifty Six Paise
(C) Post Top Lantern LED fitting comprises of finish cast aluminum spigot and spun aluminum canopy fixed with opal polycarbonate, pipe Only
arrangement for vertical mounting driver and accessories wired upto terminal block.IP
(ii)40W Cat-lll
Providing cement concrete.for foundation or for concrete filling in 1:2:4 ratio with 20 to 25 mm stone metal duly plastered with
necessary curing for pole muffing or any other purpose.
507 50.00 Cu.Mtr 5,127.77 Hundred Twenty
Seven and Seventy
Seven Paise Only
Providing & laying approved make Double walled corrugated pipes (DWC) of polyethylene(conforming to IS 14930 II )with necessary
Rupees Sixty Two
connecting accessories of same material at required depth in existing trench for laying of cable. below ground / road surface for
508 1,650.00 mtr. 62.62 and Sixty Two Paise
enclosing cable
(A)50 mm outer dia
Schedule B Page 84 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
Providing & laying approved make Double walled corrugated pipes (DWC) of polyethylene(conforming to IS 14930 II )with necessary
Rupees Ninety Five
connecting accessories of same material at required depth in existing trench for laying of cable. below ground / road surface for
509 200.00 mtr. 95.95 and Ninety Five
enclosing cable
(C))90 mm outer dia
Providing & laying approved make Double walled corrugated pipes (DWC) of polyethylene(conforming to IS 14930 II )with necessary Rupees One
connecting accessories of same material at required depth in existing trench for laying of cable. below ground / road surface for Hundred Thirty
enclosing cable Seven and Thirty Six
(D)120 mm outer dia. Paise Only
Making trench in soft soil of suitable width of 90 cm deep for laying cable or locating the fault all over the run and back filling the same Rupees Fifty Five
511 1,450.00 and making the surface as normal ground. mtr. 55.55 and Fifty Five Paise
Making trench in Hard Murrum / Tar Road of suitable width of 90 cm or required depth for laying any size of cable or locating the fault Rupees Seventy
512 200.00 all over the run and back filling the same and making the surface as normal ground. mtr. 74.74 Four and Seventy
Four Paise Only
Supplying & erecting in earthpit of minimum bore dia. 225mm size approved make Safe Earthing Electrode consisting Pipe-in-Pipe
Technology as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of 80 mm having 80-200 Micron
galvanising, Inner pipe dia of 40 mm having 200-250 Micron galvanising, connection terminal dia of 14 mm with constant ohmic value
surrounded by highly conductive compound with high charge dissipation suitable for following type of applications with chamber and Rupees Ten
heavy duty cover.(approved make OEM has to submit test certificate including value of earth resistane of installation. Thousand Four
[C] For Electrical Installation covering Transformer Neutrals, Lightning arrester Earthing, A.C.Plant & Sensitive Computer System(like Hundred Eighty Nine
Automation, SCADA)i.e. independent Earthing located in other than normal soil i.e. Soft Rock, Marshy Soil etc.. Only
-Length of Pipe : 3 Mtrs.
-Back filling Compound :2 nos Bags of 25 Kg.
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate Rupees Eleven
having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. Thousand Seven
514 20.00 Ea. 11,727.12 Hundred Twenty
Seven and Twelve
Providing one bag of 25 Kg. Additional Back Filling Compound (BFC) suitable for safe earthing device.
Hundred Seven Only
Providing and erecting required size HOT deep Galvanised iron strip for earthing of H.T. , OCB/ ACB/ Transformer LT panel board, Motors
etc. using proper clamp.
516 250.00 kg 77.77 Seven and Seventy
Seven Paise Only
Providing and erecting required size Copper strip for earthing of H.T. OCB / ACB/ Transformer, LT panel board, Motors etc. using copper Rupees Seven
clamp. Hundred Ninety Four
and Eighty Seven
Providing and erecting Annealed bare Copper wire 8 to 16 SWG. Rupees Seven
Hundred Ninety Four
and Eighty Seven
Schedule B Page 85 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
Providing and erecting HOT deep Galvanised iron strip wire 8 to 16 S.W.G.
519 200.00 Kg. 77.77 Seven and Seventy
Seven Paise Only
For using salt and charcoal / coke as required for pipe type earthing. Rupees One
Hundred Seventy
One and Seventy
Providing and erecting Pipe type earthing having 150 cms.long and 2.5 cms. dia. galvanised iron pipe with coupling and buch buried in Rupees Three
specially prepared earth pit complete with necessary 8 SWG earth wire. Hundred Sixty Eight
and Sixty Five Paise
LIGHTNING ARRESTER Rupees Nine
SITC of Vertical Air Termination Solid aluminium with Base- 10 mm dia and 1000 mm long. Air Termination Base tested for conditioning, Thousand Four
522 10.00 Ageing Test & Lightning impulse current withstand test: 100 kA of 10/350µs waveform in an accredited Third party laboratory as per 6.3 & Each 9,416.23 Hundred Sixteen and
6.4 of IEC 62561-1 2017 protocol with MAST 34mm dia 3000 mm long- Cold Galvanized Twenty Three Paise
SITC of 8 mm dia solid Aluminium Conductor for roof top mesh grid and tested as per IEC 62561- 2 conducted in the Govt. accredited
thirty party laboratory to meet the requirement of IS/IEC 62305 with Required Accessories - Aluminium Holding clamp at every 1 mtr
distance, Aluminium/SS cross splicer at every crossing of Alu. conductor, Expansion piece with connectors at every 20 mtr distance,
523 510.00 Aluminium straight Splicer to connect conductors. All Accessories should be tested as per IEC 62561-1 2018 Cl. 6.3 for conditioning & Mtr 299.97
Nine and Ninety
Ageing Test & 6.4 for Lightning impulse current withstand test: 100 kA of 10/350µs waveform(Ageing & Electrical test ) conducted in a
Seven Paise Only
sequence manner & tested in the Govt. accredited Third party laboratory to meet the requirements of IS/IEC
SITC of 10 mm MS Round Solid Conductor having smooth surface Should be tested and use exclusively for lightning protection (Vertical
Riser/Down Conductor which shall be concealed in Column OR Flushed on) to meet the requirement of IS IEC 62305 With Accessories -
Earthing stud of dimension SS-75mm OD plate with 10mm dia tail connector used in structural steel ring earthing system to meet the
requirements of IS/IEC 62305. (For Interconnecting the Column and the Terrace AL Conductor / Strip/Flat), SS Cross Connector to connect
Earth fixing point to vertical raiser/Down conductor, SS Straight Splicer at every 4 Mtr to connect MS conductor in column, Bonding
524 510.00 /Rebar Clamp at every 3 mtr suitable for interconnecting round conductor with reinforcement inside the concrete for structural earthing Mtr 728.21
Eight and Twenty
system, SS connector -To connect external conductor 8- 10 mm with earth fixing point. All Accessories should be tested as per IEC 62561-
1 2018 Cl. 6.3 for conditioning & Ageing Test & 6.4 for Lightning impulse current withstand test: 100 kA of 10/350µs waveform(Ageing &
Electrical test ) conducted in a sequence manner & tested in the Govt. accredited Third party laboratory to meet the requirements of
SITC of Galvanized Steel Flat 25x6 mm thickness from earth electrode directly in ground as required. Zinc coating: 500 g/m square Rupees One
(Approx:70 micron coating) tested and used exclusively for lightning protection earthing system and ring equipotential bonding. Hundred Fifty Four
and Fifty Three Paise
SITC of 14.2 mm dia 3 mtr long Earth electrode of High tensile steel electrode with 250 micron copper bonding & 1 bag of Carbon fill Rupees Five
Based environment friendly backfill tested as per IEC 62561-7 in NABL accredited Laboratory and suitable stainless Steel double sided Thousand Nine
526 10.00 clamp. Eco Friendly rust proof heavy duty weather proof Polyethylene Earth Pit Chamber with following dimensions :254 mm dia (top), Per Set 5,992.33 Hundred Ninety Two
330 mm dia (bottom) & 260 mm (height). and Thirty Three
Schedule B Page 86 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
Supply, Design, installation and testing of 10KW three phase Two Wheeler EV charging point, as per suggested by Design consultant along
Rupees Eighty Nine
527 10.00 with client and PMC. Item rate is included with applying to concern government body and all require procedure for getting approval. Ea. 89,000.00
This charging point is below 12KW with as per tender specifications
Supply, Design, installation and testing of 15KW three phase Four Wheeler EV charging point, as per suggested by Design consultant along
Rupees Ninety Five
with client and PMC. Item rate is included with applying to concern government body and all require procedure for getting approval.
528 10.00 Ea. 95,500.00 Thousand Five
This charging point is below 20KW with as per tender specifications
Supplying & erecting 5 stage single reverse osmosis water purification system with M.S. powder coated frame, prefilter housing with 'O'
Rupees Twenty Nine
ring presediment filter GAC filter, carbon filter suitable buster DC pump capacity 80 psi, mention with 40 psi inline type post carbon filter
auto low & high pressure switches with following size of storage tank & LPH capacity & erected as directed
529 10.00 Ea. 29,187.99 Hundred Eighty
[C] 50 Ltr / Hr with 150 psi 2 nos booster pump
Seven and Ninety
Nine Paise Only
Providing & Erecting full SS Body (SS 304) Split type water cooler having storage capacity 160 to 175 Ltr.(Tank SS 304) & Cooling capacity
150 ltr. Per hour @ an ambient temp of 350 C.The outlet temp. of the water should drop by 150C within a hour,The water cooler should Rupees Sixty Seven
be comprising of hermetically sealed Reciprocating compressor with R134A, fan motor, Copper Condensing unit with company fabricated Thousand Two
530 10.00 Outdoor Unit water tank surrounded by evaporating coil, thermostats, relay etc.complete with necessary copper tube & Insulation, M.S Ea. 67,226.61 Hundred Twenty Six
Chanel Stand with Painting for water tank & M.S. Powder Coated Stand for Outdoor unit with Installation. With DPELCB and 4 Way DB Box and Sixty One Paise
with accessory Three core Cord for connection. Only
300KVA (Each Power module shall be < 50 KVA)
Online UPS- Input supply: Three Phase, Output supply: Three Phase.
Supplying, installation, Testing & Commissioning of following capacity at full load (Unity Power Factor) at operating temperature 0 to
0C, Relative humidity 0 to 95%, Online double conversion true sine wave Uninterrupted hot swapable (allow for the replacement or
addition of battery modules without shutting down the entire system) modular Power Supply (UPS) system with N+1 modules (N denotes
total number of modules required for rated capacity). The UPS shall include a Rectifier, inverter, battery bank suitable for 30 minutes
back up (Battery VAH capacity shall not be less than 1600 VAH per KVA of UPS rating per Hour backup time) on full load (Battery shall be
VRLA, SMF in ABS Container) and Static Bypass switch along with provision for manual bypass, suitable isolation transformer for Rupees Thirty Three
additional protection against neutral faults etc. UPS shall have inbuilt phase sequence correction. The UPS systems offered are to be of Lakh Fifty Eight
the latest technology with Digital Control Microprocessor based for reliable operation using Insulated Gate Bipolar Transistor (IGBT)'s Thousand Seven
both for the rectifier & inverter (3 Level) with PWM (Pulse Width Modulation). The quality of design, manufacturing and inspection Hundred Sixty Eight
process should confirm to the relevant Inter-national standards such as IEC/EN/VDE. The operating efficiency of the UPS systems shall be and Sixty Four Paise
>96% while operating on battery mode and delivering quality power to the 100% non-linear loads. Current total harmonic effect(ITHD) on Only
the input grid shall be < 5% at 50 %load. (The required LC ( inductor (L) and a capacitor (C)) filters shall be included in UPS cost), extreme
power factor kit to be included to limit the input power factor (PF) to 0.99 and output power factor shall be unity (i.e. kw rating of the UPS
shall be kva rating x 1 ), however UPS shall be suitable to take load at 0.7 laging to 0.7 leading power factor loads. UPS shall be suitable for
incoming supply AC : 3Phase 400V +/-20%, 50 Hz +/-5 Hz, AC Output voltage: 3Phase 415 Volt, 50 Hz +/- 0.2Hz, Overload capacity of 120%
for 10 mins, Sine wave output. Non condensing, noise level less than 60db at 1 meter distance, protections: Input Under voltage over
voltage, abnormal out voltage, battery over charging, output over current, short circuit protection, battery deep discharge protection,
10KV surge. UPS must comply with low voltage electromagnetic compatibility (EMC) achieved as per EN 6204, EN6204 Part I and Part 2, it
shall be a Voltage and Frequency Independent (VFI)-type UPS. . Communication RS232/RS485/SNMP port open protocol for BMS
Schedule B Page 87 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
Providing, Liaisoning, Submission, Approval, Testing and Commissioning of complete electrical licensing work as per GEB/PGVCL norms
and Electrical Inspector requirements.
The scope shall include obtaining approvals for Transformer, DG Set, Earthing System and all associated electrical installations. The
contractor shall prepare and submit all necessary documents including drawings, single line diagrams, load calculations, protection
schemes, technical specifications and test reports.
The work includes complete liaisoning with GEB/PGVCL and Electrical Inspector, coordination for inspections, compliance of observations
and obtaining all statutory approvals.
532 1.00 The contractor shall also arrange submission of transformer test reports, oil test reports, DG set details, panel approvals and all required Ea. 50,000.00
documentation as per IS standards and GEB regulations.
The job includes complete follow-up and coordination up to final inspection, meter installation, and obtaining energization/charging
permission from GEB authority.
The work shall be considered complete only after obtaining all approvals and successful energization of the electrical system and release
of power connection.
All materials, labour, documentation, site visits, liaisoning and assosicted statutory approvals shall be included in the scope.
Passive Network Solution: Rupees Forty Three
533 11,500.00 SITC of CAT6 UTP 23AWG Solid: Per Meter RMT 43.43 and Forty Three
[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ] Paise Only
Supplying & erecting approved make Telephone Cable electrolytic copper conductor PE insulation twisted in two pairs, & wrapped with
FRLS PVC tape & sheathed with FRLS PVC or HFFR outer Jacket suitable for telephone wiring & confirming to C-DOT erected in existing
pipe. of following size of conductors & nos.of pairs. With necessary connections. Rupees Twenty and
[A] Conductor Size 0.5 mm Twenty Paise Only
Supplying & erecting approved make Telephone Cable electrolytic copper conductor PE insulation twisted in two pairs, & wrapped with
FRLS PVC tape & sheathed with FRLS PVC or HFFR outer Jacket suitable for telephone wiring & confirming to C-DOT erected in existing
535 200.00 pipe. of following size of conductors & nos.of pairs. With necessary connections. RMT 125.24
Five and Twenty
(b) Armoured [Jelly Filled]
Four Paise Only
Supplying & erecting approved make Telephone Cable electrolytic copper conductor PE insulation twisted in two pairs, & wrapped with
FRLS PVC tape & sheathed with FRLS PVC or HFFR outer Jacket suitable for telephone wiring & confirming to C-DOT erected in existing
536 200.00 pipe. of following size of conductors & nos.of pairs. With necessary connections. RMT 199.98
Nine and Ninety
(b) Armoured [Jelly Filled]
Eight Paise Only
(2) Twenty Pairs
Supplying & erecting approved make Telephone Cable electrolytic copper conductor PE insulation twisted in two pairs, & wrapped with
FRLS PVC tape & sheathed with FRLS PVC or HFFR outer Jacket suitable for telephone wiring & confirming to C-DOT erected in existing
Hundred Sixty Seven
537 200.00 pipe. of following size of conductors & nos.of pairs. With necessary connections. RMT 467.63
and Sixty Three Paise
(b) Armoured [Jelly Filled]
(3) Fifty Pairs
Schedule B Page 88 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
Supplying & erecting approved make Telephone Cable electrolytic copper conductor PE insulation twisted in two pairs, & wrapped with
FRLS PVC tape & sheathed with FRLS PVC or HFFR outer Jacket suitable for telephone wiring & confirming to C-DOT erected in existing
Hundred Seventy
538 100.00 pipe. of following size of conductors & nos.of pairs. With necessary connections. RMT 875.67
Five and Sixty Seven
(b) Armoured [Jelly Filled]
(4) One Hundred Pairs
SITC of O. F.Cable 06F Outdoor - Armoured Unitube SM - HDPE Sheath [Approved by Competent Authority i.e. not Below the rank of Rupees Fifty and
Executive Engineer ] Fifty Paise Only
Supply & installation of modular type accessories for U PVC snap-on adaptable trunking/Pop up Box with required items erected with Rupees Two
necessary connection. As desired by Engineer In charge Hundred Forty Six
v) RJ-11 Telephone socket cat-III and Forty Four Paise
SITC of Jack Cat 6 Keystone UTP
[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]
541 440.00 NO 161.60 Hundred Sixty One
and Sixty Paise Only
SITC of Face Plate - Single (Keystone Jack,square)
Rupees Ninety and
542 400.00 [Approved by Competent Authority i.e. not Below the rank of Executive Engineer ] Ea. 90.90
Ninety Paise Only
SITC of Face Plate - Dual (Keystone Jack,square)
543 40.00 [Approved by Competent Authority i.e. not Below the rank of Executive Engineer ] Ea. 101.00
Hundred One Only
SITC of CAT6 UTP 24AWG PATCH CORD:2M,Plug 30U' Snag less
[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]
544 440.00 NO 200.99 Hundred and Ninety
Nine Paise Only
SITC of CAT6 UTP 24AWG PATCH CORD:1M,Plug 30U' Snag less Rupees One
[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ] Hundred Fifty Six
and Fifty Five Paise
SITC of Patch Panel Cat 6 UTP Keystone Type- 24 Port-Fully Loaded Rupees Four
[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ] Thousand Four
Hundred and Fifty
Seven Paise Only
SITC of LIU 12 PORT Rack Mount - Loaded (LC) SM Rupees Six
[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ] Thousand Nine
547 15.00 NO 6,901.33 Hundred One and
Thirty Three Paise
SITC of PIGTAIL LC SM SIMPLEX LENGTH- 1m Rupees Seven
[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ] Hundred Seventy
Nine and Seventy
Schedule B Page 89 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
SITC of PATCH CORD LC-LC SM DUPLEX LENGTH- 3m Rupees One
[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ] Thousand Nine
549 60.00 NO 1,901.83 Hundred One and
Eighty Three Paise
Supplying and fixing of following size Wall Mount Rack having Fixed Structure with 0.8mm CRCA Sheet, completely knocked-down Rupees Eleven
condition (CKD) Shape, Vertical Mounting Rail 1.6 mm with 'U'Marking, Minimum 2 cable entry/exit provision at Top and bottom with Thousand Two
550 15.00 rubber protection, Front 5mm Toughened Glass with lock, wall mounting kit, Powder coated Color- RAL- 7035, complied with UL & RoHS, NO 11,296.61 Hundred Ninety Six
2 x 6 sockets 16A power distribution units, 3 numbers closed cable organizer, Hardware mounting screws packet of 20 x 1 number, etc. and Sixty One Paise
complete as required. 15U Rack Only
Supplying and fixing 24U Rack with 4 inch Castor wheels and front brake Floor Standing Rack with Main Frame Pillar of 1.25mm Powder
Coated CRCA Sheet with removable side panels, L- Shape adjustable Vertical Mounting Rail of 2mm with 'U'Marking completely knocked- Rupees Seventeen
down condition (CKD) Shape, fitted with 4 number cooling fans, minimum 5nos two line cable entry/exit provision at top and bottom with Thousand Nine
551 1.00 rubber protection, Front door 5mm Toughened Glass with MS frame or MS perforated with lock, Rear MS vented or perforated door, NO 17,966.95 Hundred Sixty Six
Powder coated Color- RAL- 7035 or black, complied with UL & RoHS, 2 x 6 sockets 16A power distribution and Ninety Five
units, 3 numbers closed cable organizer, Hardware mounting screws packet of 20 x 1 number, etc. complete as required. Paise Only
Supplying and fixing 42U Rack with 6 inch Castor wheels and front brake Floor Standing Rack with Main Frame Pillar of 1.6mm CRCA Sheet
with removable side panels, L- Shape adjustable Vertical Mounting Rail of 2mm with 'U'Marking completely knocked-down condition Rupees Twenty
(CKD) Shape, fitted with 4 number cooling fans, minimum 8nos two line cable entry/exit provision at top and bottom with rubber Seven Thousand
552 1.00 protection, Front door 5mm Toughened Glass with MS frame or MS perforated with lock, Rear MS vented or perforated door, Powder NO 27,927.12 Nine Hundred
coated Color- RAL- 7035 or black, complied with UL & RoHS, 2 x 6 sockets 16A power distribution units, 3 numbers closed cable organizer, Twenty Seven and
Hardware mounting screws packet of 20 x 1 number, etc. complete as required. Twelve Paise Only
Active Network, Wireless Network & Security Solution:
SITC of 20 x SFP ports
4 x Combo 10/100/1000BASE-T/SFP ports
4 x 10G SFP+ ports Rupees Six Lakh
6 kV surge protection on all RJ-45 access ports Forty Seven
Switch Resource Management (SRM) for flexible management of system resources Thousand Nine
Redundant Power Supply (RPS) support Hundred Thirty Nine
MPLS L2VPM/L3 VPN support and Twenty Four
Full L3 routing protocol support including OSPF, BGP, and ISIS for IPv4/IPv6 Paise Only
SDN-enabled switch, compatible with Openflow
10-GbE SFP+ to SFP+ 1M Direct Attach Cable [Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]
SITC of 24 x 10/100/1000BASE-T ports
4 x Gigabit RJ45/SFP Combo ports
Advanced L2 switching and security features
554 17.00 NO 15,399.47 Hundred Ninety
L2+ Static Routing
Optional “standard mode” or “surveillance mode” management user interface
Seven Paise Only
[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]
Schedule B Page 90 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
SITC of 24 x 10/100/1000BASE-T PoE ports
4 x Gigabit RJ45/SFP Combo ports Rupees Thirty One
Advanced L2 switching and security features Thousand Nine
555 17.00 L2+ Static Routing No 31,996.80 Hundred Ninety Six
Optional “standard mode” or “surveillance mode” management user interface and Eighty Paise
193 W PoE budget Only
[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]
SITC of 48 x 10/100/1000BASE-T ports
4 x Gigabit GbE/SFP combo ports
Advanced L2 switching and security features
556 7.00 NO 30,398.98 Hundred Ninety
L2+ Static Routing
Eight and Ninety
Optional “standard mode” or “surveillance mode” management user interface
Eight Paise Only
[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]
SITC of Maximum distance of up to 10 km
Hot-pluggable Rupees Four
Single-mode fiber Thousand Seven
1000BASE-LX (IEEE 802.3z standard) Hundred Fifty Four
Duplex LC connector Only
MSA, RoHS-compliant [Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]
Supplying, Installation, Testing and commissioning of indoor Wireless Controller having features and specifications etc. as mentioned
here under- The network controller shall be a dedicated hardware appliance designed for centralized management of wireless access
points, It must support the management of up to 500 networking devices, The system should be on-premise, ensuring data privacy and
complete control over network configurations. It must include an intuitive user interface for real-time monitoring, device discovery,
firmware upgrades, scheduling, and mass configuration deployment. Features such as role-based administration, multi-site management.
AP to controller communication shall be use of industry standards-based (IEEE or IETF) CAPWAP or any tunneling protocols as per
guidelines of DoT.The controller should support Layer 2 and Layer 3 device discovery, VLAN configuration, MAC ACL groups, IGMP Rupees Ninety Five
snooping, and band width optimization. Automatic radio frequency (RF) management and access policy enforcement are required for Thousand Nine
558 1.00 reliable wireless performance. The solution must offer a comprehensive dashboard with network topology, floor plan views, client and NO 95,955.93 Hundred Fifty Five
device lists, and alert notifications. For authentication, it should support a range of methods including local database, external RADIUS, and Ninety Three
LDAP, and passcode or MAC-based access. It should provide detailed traffic analytics, logs, and customizable reporting for network Paise Only
visibility and planning. Firmware and configuration backup and restoration functions must be available, with USBbased log storage
supported. Physical specifications should include a compact form factor with a minimum of one 2.5G Ethernet port and USB 3.0 port, and
it must be MTCTE,CE, FCC, and RoHS certified. The controller should operate reliably within a 0°C to 40°C temperature range and 10–90%
non-condensing humidity. /Product must be on Trusted Telecom Portal of Department of Telecommunication, Government of India etc.
complete as required.
Schedule B Page 91 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
Supplying, Installation, Testing and commissioning of indoor Wireless Access Point for High density use having features and specifications
etc. as mentioned here under- WiFi6 802.11ax 574Mbps (2.4GHz) + 2402Mbps (5GHz), WIFI 6 Certified, 1 x RJ45 console port, MG 2.5G
LAN POE Port, factory reset, WPA/WPA2/WPA3™ Personal/Enterprise, WEP 64/128-bit, SSID broadcast disable, MAC address access
control, Internal RADIUS server, SNMP, Customizable Captive Portal, Auto Channel, Works as Access Point, WDS, WDS with AP, Wireless Rupees Thirty
Client ., Web (HTTP), Secure Socket Layer (SSL), Traffic control, Support ATF/Fast Roaming/Band Steering, Supports enhanced security – Thousand One
559 65.00 WPA-PSK/WPA2- PSK/WPA3-PSK and RADIUS client, and Cipher negotiation, and MAC/ IP ACL for networks, Certifications: MTCTE, CE, NO 30,134.75 Hundred Thirty Four
FCC. Works as Standalone, Compatible with S/W & H/W Controller with addtional features like - Real-Time Monitoring and Alerts, Rich and Seventy Five
Advanced Features, Centralized Device Management, Role-Based Administration, Real-Time Monitoring, VLAN and Access Control, Auto Paise Only
RF Management and Bandwidth Optimization, Multi-SSID and Captive Portal Authentication.OEM/Product must be on Trusted Telecom
Portal of Department of Telecommunication, Government of India etc. complete as required.
Voice Communication Solution: Rupees Nine
Providing & erecting main Distribution (MDF) indoor type, back mounted frame as per DoT standard approved with krone strips Hundred Ninety Four
(a) Suitable for 10 pair and Eighty Five Paise
Providing & erecting main Distribution (MDF) indoor type, back mounted frame as per DoT standard approved with krone strips Rupees One
(b) Suitable for 20 pair Thousand Three
561 10.00 NO 1,368.55 Hundred Sixty Eight
and Fifty Five Paise
Providing & erecting main Distribution (MDF) indoor type, back mounted frame as per DoT standard approved with krone strips
(c) Suitable for 50 pair
Hundred Forty Seven
and Thirty Paise Only
Providing & erecting main Distribution (MDF) indoor type, back mounted frame as per DoT standard approved with krone strips
(d) Suitable for 100 pair
Hundred Forty Three
and Nine Paise Only
Providing & erecting main Distribution (MDF) indoor type, back mounted frame as per DoT standard approved with krone strips
(e) Suitable for 200 pair
Hundred Fifteen and
Fifty Two Paise Only
SITC of Digital / PCM / TDM EPABX System having SMT design, system with flexible universal slots. Inbuilt Auto attendant facility,
Minimum 15 Nos. conference, Analog extension line, Calling GSM, E&M line, PRI / EI & VOIP program me through Analog telephone
digital key from Ethernet, public address cord, shall have unrestricted simultaneous dialing facility,
Rupees One Lakh
QSIG protocol on PRI, 95 / STD / ISD / Local-Locking, Class of Service, Quick Dial-Single Digit dialing of any two external number, Once only
ring device, Chairman / Secretary - Do not disturb Facility, Power Down Mode, Hot Line, Hot Outward Dialing, Day Night Mode, Auto Call
565 1.00 Back, Barge-in, Call Pick Up & Call Transfer, Call transfer while Ringing with Voice Guide System, (DISA), Caller ID (CLI), CLI Base ECF, CLI NO 1,74,606.78
Hundred Six and
Base routing Internet Ready Port, External Music Port, Call Budgeting, Call Most Calculation (ASMDR), DID Direct Inverse Dialing, External
Seventy Eight Paise
Music Input, Fax Homing, Global Directory Printing with following capacities [[Approved by Competent Authority i.e. not Below the rank
of Executive Engineer ]
[E] No of Extension 128, No of Junctions 24, No of expandable ports : 512, Operators Console - 01 Compatible : ISDN and Networking
Schedule B Page 92 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
Providing and erecting add on Digital PRI T1E1 single card suitable for existing system of following ports suitable for 30 channel Rupees Twenty
[[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ] Thousand Three
566 2.00 Ea. 20,338.37 Hundred Thirty Eight
and Thirty Seven
Providing and erecting Digital key phone (12-16 direct key) [[Approved by Competent Authority i.e. not Below the rank of Executive Rupees Three
Engineer ] Thousand Nine
567 130.00 NO 3,955.16 Hundred Fifty Five
and Sixteen Paise
Video Surveillance & Monitoring Solution:
5MP/6MP IP IR 2.8/ 3.6/6/8/12 mm fixed lens (as per
site requirement) Dome Camera.
Supplying Installation Testing and Commissioning of 5/6MP IP IR Dome Camera having following specifications and features etc :- 1)Type
of Camera: Dome Camera 2) Image Sensor: 1/2.8" or better progressive Scan CMOS get color image even at night condition 3) Signal
System: PAL/NTSC 4) Minimum Illumination: 0.008Lux@ F1.4, AGC ON, 0 lux with IR or better 5) Imaging: 1/3s to 1/30000s Shutter
Support, Auto Gain Control , White Balance- Auto, Back Light Compensation, Multi zone Privacy Masking, HLC, Digital Watermarking. 6)
On Screen Display: Camera should display Camera title, Date & Time in live & recorded video both. 7) Signal to Noise Ratio: > 50 dB 8) Day
& Night: True Day & Night High Performance Mechanical IR cut filter with auto switch, IR Source Inbuilt IR LED's with effective distance
upto 50 Mtrs integrated IR 30 Mtrs for colour view in night. 9) Video Compression (Minimum): H.265 or better, Audio:- G.711U/A,
G.711Mu, G.726, AAC, G.723 10) Wide Dynamic Range: WDR (120dB or more) 11) Digital Noise Reduction: DNR (2D/3D) On/Off 12)
568 100.00 NO 10,847.46 Hundred Forty Seven
Streaming: Triple streaming, configurable 13) Video Streaming & Frame Rates: Triple streaming , configurable Main stream: 5/6MP
and Forty Six Paise
@25/30 fps, Sub streams: D1@25/30 fps or better 14) Image Setting: Rotate Mode, saturation, brightness, contrast, sharpness adjustable
through client software or web browser 15) Profile Management: User configuration import, export 16) Security: User Authentication,
Water Marking 17) Onboard Storage: Camera should support built-in Micro SD/SDHC/SDXC Card slot upto 512 GB. It should be supplied
with minimum 128GB memory Card. 18) Recording Management: Format SD, overwrite, storage management, video to NAS device,19)
Edge Analytics : Tripwire, Intrusion, Motion Detection 20) Alarm Trigger : Motion/tampering detection; network disconnection detection;
IP conflict detection; memory card state detection; memory space detection 21) Alarm Support: It should have 1/1 Alarm In/ Out Port 22)
Audio Support: It should have 1x Built-In Mic and 1/1 Audio In/ Out Port for external Mic. and Speaker (As per site requirement) with
G.711U/A/ G.711Mu/AAC/ G.726 audio compression 23) Network Protocol: SFTP, IPv6, IPv4, DNS,RTCP,NTP, RTP, HTTP, HTTPS, SNMP
TCP/IP, PPPoE,NFS, UDP, ICMP, SSL, DHCP, SMTP, RTSPS,unicast, 24) System Capability: ONVIF 25) VMS: Camera shall support open source
VMS 26) Cyber Security: trusted boot, AES 256-bit Encryption, Configuration encryption, trusted execution, Digest, security logs, , account
Schedule B Page 93 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
5MP/6MP IP IR 2.8/ 3.6/6/8/12 mm fixed lens (as per
site requirement) outdoor bullet Camera
Supplying Installation Testing and Commissioning of 5MP/6 MP IP IR Bullet Camera having following specifications, type of lens and
features etc :- 1) Type of Camera: Bullet Camera 2) Image Sensor: 1/2.8" or better progressive Scan CMOS get color image even at night
condition 3) Signal System: PAL/NTSC 4) Minimum Illumination: 0.006Lux@ F1.4, AGC ON, 0 lux with IR or better 5) Imaging: 1/3s to
1/30000s, Auto Gain Control , White Balance- Auto, Back Light Compensation, Multi zone Privacy Masking, HLC, Digital Watermarking. 6)
On Screen Display: Camera should display Camera title, Date & Time in live & recorded video both. 7) Signal to Noise Ratio: > 50 dB 8)
Lens Type & Focus: as given below. 9) Day & Night: True Day & Night High Performance Mechanical IR cut filter with auto switch, IR
Source Inbuilt IR LED's with effective distance upto 50 Mtrs integrated IR and 30 Mtrs for colour view in night. 10) Video Compression
(Minimum): H.265 or better, Audio:- G.711U/A, G.711Mu, G.726, AAC, G.723 11) Wide Dynamic Range: WDR (120dB or more) 12) Digital
Noise Reduction: DNR (2D/3D) On/Off 13) Streaming: Triple streaming, configurable 14) Video Streaming & Frame Rates: Triple streaming
569 20.00 NO 10,614.41 Hundred Fourteen
, configurable Main stream: 5MP/6MP @25/30 fps, Sub streams: D1@25/30 fps or better 15) Image Setting: Rotate Mode, saturation,
and Forty One Paise
brightness, contrast, sharpness adjustable through client software or web browser 16) Profile Management: User configuration import,
export 17) Security: User Authentication, Digital Water Marking 18) Onboard Storage: Camera should support built-in Micro
SD/SDHC/SDXC Card slot upto 512 GB. It should be supplied with minimum 128GB memory Card. 19) Recording Management: Format SD,
overwrite, storage management, video to NAS device, 20)Edge Analytics: Tripwire, Intrusion, Motion Detection 21) Alarm Trigger :
Motion/tampering detection;network disconnection detection; IP conflict detection; memory card state detection; memory space
detection 22) Alarm Support: It should have 1/1 Alarm In/ Out Port 23) Audio Support: It should have 1x Built-In Mic and 1/1 Audio In/
Out Port for external Mic. and Speaker (As per site requirement) with G.711U/A / G.711Mu/AAC/ G.726 audio compreesion 24) Network
Protocol: SFTP, IPv6, IPv4, DNS,RTCP,NTP, RTP, HTTP, HTTPS, SNMP TCP/IP, PPPoE,NFS, UDP, ICMP, SSL, DHCP, SMTP, RTSPS,unicast, 25)
System Capability: ONVIF 26) VMS: Camera shall support open source VMS 27) Cyber Security: trusted boot, AES 256-bit Encryption,
Configuration encryption, trusted execution, Digest, security logs, account lockout, ,video encryption, IP/MAC filtering, HTTPS, trusted
PTZ IP IR CAMERA
5MP IP IR motorized PTZ @25/30fps or better camera, Triple streaming , configurable on resolution:-
Main stream: 5MP@25/30 fps Sub streams:1080p@25/30 fps, varifocal lens 3.95mm (±5mm) ~ 177.75mm (±5mm) or better with
Automatic & manual Focus Adjustment provisions, 45x Optical zoom and 16x Digital zoom with angle of view H: 65.7°–1.9°V:
39.4°–1.1°D: 73.1°–2.1, PAN Travel: Pan: 0° ~ 360° endless,Manual Pan: 260° /s, Preset : 300° /s, Tilt Travel: Tilt: -20° ~ 90°, auto flip
180°, Manual Tilt: 120° /s, Preset : 200° /s
Supplying Installation Testing and Commissioning of PTZ (Pan,Tilt and Zoom) IP IR Camera having following spcifications and features etc
:-PTZ (Pan,Tilt and Zoom) IP IR Camera having following spcifications and features etc :- 1) IP IR PTZ Camera: Motorized PAN TILT ZOOM
with IR 2) Image Sensor: 1/2.8" or better progressive Scan CMOS 3)Signal System: PAL/NTSC 4) Minimum Illumination: 0.008 Lux@ F1.6,
Rupees Ninety One
AGC ON,, 0 lux with IR, or better 5) Imaging: 1/1s to 1/30000s, Auto Gain Control , White Balance- Auto, Back Light Compensation,Image
Rotation, Multi zone Privacy Masking (Upto 24 Area), HLC, Defog, Region Of Interest and EIS features. 6) On Screen Display: Camera
570 2.00 NO 91,503.39 Hundred Three and
should display Camera title, Date & Time in live & recorded video both. 7) Signal to Noise Ratio: > 50 dB 8) Event Notification: Through
Thirty Nine Paise
Relays, E-Mails or FTP 9) Day & Night: True Day & Night High Performance Mechanical IR cut filter with auto switch, IR Source Inbuilt IR
LED's with effective distance. The camera should have IR LED’s and cover distance up to 300 meter or above 10) Auto Tracking: The
camera should be equipped with Deep-learning-based auto tracking function using simultaneously all of the panning, tilting and zooming
should be available. When a motion is detected in a registered monitoring area, the camera should track the motion (object) and capture
it. 11) Pre/Post Event Buffering: The camera should support atleast of 5 seconds of pre & post event buffering. 12) Presets: 300 Presets
13) Video Compression (Minimum): H.265 or better, H.264, Audio:- G.711U/A, G.711Mu, G.726, AAC, G.723 14) Wide Dynamic Range:
WDR (120dB or more), HLC & BLC 15) Digital Noise Reduction: DNR (2D+3D) On/Off 16) Image Setting: Rotate Mode, ROI ,EIS, Defog,
saturation, brightness, contrast, sharpness adjustable through client software or web browser 17) Profile Management: User
configuration import, export 18) Cyber Security: Configuration encryption, AES 256-bit Encryption, Digest, account lockout, video
encryption, IP/MAC filtering, trusted boot, trusted upgrade, trusted execution 19)Onboard Storage: Camera should support built in Micro
Schedule B Page 94 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
Supply Installation Testing & Commissioning of VMS Server having Processer: 4-Core, 3.0 GHz Operating System: Windows Server Rupees Twelve Lakh
2019(64bit) Memory: 16G DDR4, 2400MT/s UDIMMS Storage: 1T SATA × 2, 3.5" Enterprise SATA 7.2k HDDs RAID: H330 RAID Controller Thirty Four
571 1.00 with RAID 1 NIC : 1GbE × 2 Chassis: 1U, Rack Mount Battery: CR-2032 Coin Cell/Lithium/0.0032kg Power Supply: 250W Cabled PSU Chipset NO 12,34,120.00 Thousand One
: Intel C236 Network controller: Broadcom® 5720 USB : 5 nos (Server can be as per requirment of VMS software and should be capable of Hundred Twenty
tender quantity of cameras) Only
Supply Installation Testing & Commissioning of VMS Camera License. Centrally managed, scalable client/server based architecture that
allows full virtual matrix switching and control systems support https based web clients as well as mobile video clients VMS should
provide min. Up to 9 or more different and independent programmable recording schedules. Receive and display the alarm notification Rupees Six
and view the alarm related live video or recording, twin authorization logon, Multiple devices can be added network cameras, network Thousand Four
speed domes,By specifying an IP segment,By specifying a port segment support configuring the VIDEO ANALYTICS parameters from Hundred Twenty
the configuration client. ,take action to alarm triggered by analytics software. It should Supports standard ONVIF™ protocol VMS Should Three Only
be same Make as Camera Make.
Supply Installation Testing & Commissioning of Network Attached Storage having cloud-integrated unified storage, supports NAS, block, Rupees Twenty
object storage and cloud gateway, single controllersubsystem including 4x1G iSCSI ports +2x host board slot(s), 2x4GB, 2x(PSU+FAN Three Lakh Eleven
573 2.00 Module), 16x SATA drive trays and 1xRackmount kit, with Enterprise 3.5" SATA 6Gb/s, Total 256 TB HDD, 7200rpm form very first Day. NO 23,11,288.00 Thousand Two
Hundred Eighty Eight
Client PC with Intel i7 processor with 16GB RAM , Minimum 512GB SSD Hard Disk, 4GB NVDIA graphics card.
Rupees One Lakh
Hundred Four Only
Supply, Installation, Testing & Commissioning of 50 Inch Android Professional Display, 55" / 139 cm diagonal, 16:9, UHD, Pixel Pitch : Rupees One Lakh
0.105 (H) x 0.315 (V)mm, USB Supported HDD, Hotel Mode, CEC, Dolby Audio, Bluetooth, 802.11a/b/g/n 2.4G 2T2R, Built-in, CPU : Cortex- Twenty Two
575 1.00 A55 x 4.1.1 GHz Processor, GPU : Triple core Mali470 600 MHz NO 1,22,148.00 Thousand One
Hundred Forty Eight
INTELLIGENT FIRE ALARM SYSTEM
Supplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central
processing unit with the following loop modules and capable of supporting not less than 240 devices (including detectors) and minimum
120 detectors per loop and loop length up to 2 km, network communication card, minimum 320 character graphics/ LCD display with Rupees Four Lakh
touch screen or other keypad and minimum 4000 events history log in the non volatile memory (EPROM), power supply unit (230 ± 5 % V, Four Thousand One
576 2.00 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger. The panel shall have facility to connect NO 4,04,146.61 Hundred Forty Six
printer to printout log and facility to have seamless integration with analog/digital voice evacuation system (which is part of the schedule and Sixty One Paise
of work under SH: PA System) and shall be complete with all accessories . The panel shall be compatible for IBMS system with open Only
protocol BACnet/ Modbus over IP complete as per specifications.
Ten Loop Panel.
Supplying, installation, testing & commissioning of repeater panel with 320 character/ Touch screen LCD display with inbuilt reset, Rupees Eleven
acknowledge and silence switches complete as required. Thousand Six
577 4.00 Each 11,638.98 Hundred Thirty Eight
and Ninety Eight
Schedule B Page 95 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
Supplying, installation, testing & commissioning of intelligent analog addressable photothermal detector complete with mounting base Rupees Two
complete as required. Thousand Five
578 1,150.00 Each 2,545.76 Hundred Forty Five
and Seventy Six
Supplying, installation, testing & commissioning of response indicator on surface/recessed MS Box having two LED, metallic cover Rupees Two
complete with all connections etc as required. Hundred Fifty Nine
and Thirty Two Paise
Supplying, installation, testing & commissioning of intelligent addressable programmable sounder complete as required. Rupees Two
580 35.00 Each 2,361.86 Hundred Sixty One
and Eighty Six Paise
Supplying, installation, testing & commissioning of intelligent addressable thermal detector with rate of rise cum fixed temperature Rupees Two
thermistor complete with base as required. Thousand Four
581 320.00 Each 2,428.81 Hundred Twenty
Eight and Eighty One
Supplying, installation, testing & commissioning of fault isolator complete with base as required. Rupees Two
582 75.00 Each 2,910.17 Hundred Ten and
Seventeen Paise
Supplying, installation, testing & commissioning of addressable fire control module complete as required. Rupees Two
583 10.00 Each 2,674.58 Hundred Seventy
Four and Fifty Eight
Supplying, installation, testing & commissioning of addressable phone control module complete as required. Rupees Two
584 10.00 Each 2,908.47 Hundred Eight and
Forty Seven Paise
Supplying, installation, testing & commissioning of addressable beam detector with short circuit isolator (inbuilt or separate) complete Rupees Sixty Six
with emitter and receiver including connections with remote test features etc complete as required. Thousand Five
585 10.00 Each 66,546.61 Hundred Forty Six
and Sixty One Paise
Supplying, installation, testing & commissioning of addressable manual call point complete as required. Rupees Three
586 35.00 Each 3,443.22 Hundred Forty Three
Schedule B Page 96 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required. Rupees Three
587 35.00 Each 3,120.34 Hundred Twenty and
Thirty Four Paise
Supplying, installation, testing & commissioning of fire fighter telephone handset complete as required. Rupees Five
Thousand Ninety
Eight and Thirty One
Supplying, installation, testing & commissioning of fire fighter phone jack complete as required. Rupees One
589 10.00 Each 1,431.36 Hundred Thirty One
and Thirty Six Paise
Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, Rupees One
steel wire armouring & FRLS/HFFR outer sheath complete as required. Hundred Sixty Two
and Seventy One
Mortar System for all shafts: Fire barrier for sealing of floor openings applying Mortar System tested in accordance with UL
standards and capable of providing a fire and smoke resistance for 120 minutes for both E (Insulation) & I (Integrity) followed by hose-
stream test. For floor penetrations, install 8mm dia. rebar with no less then 200mm C/C spacing in both directions and secure the same
with GI square mesh. Provide/install one layer of 75 mm thick mineral wool insulation having 140 Kg/M3 density over GI square-mesh.
Rupees Twenty Four
591 5.00 Once the mineral wool is secured in place, install / pour Mortar to a depth of minimum 65 mm. Chalk the perimeters joints between Sq.Mtr 24,000.00
mineral wool and floor-slab with an acrylic based sealant, and all the combustible and non-combustible penetrant to be filled with
Intumescent Graphite based wrap having intumescent property to maintain the over-all integrity of the system. The Mortar and the
System should be UL listed in Underwriter's Laboratory website.
Fire Sealant: Acrylic sealant is an acrylic-based, single component fire stopping sealant tested with Minimum 2 hours fire rating when
tested in accordance with UL acc. UL 2079 (ASTM E1966) standards and shall be used along periphery of services like Ducts, Pipes, Cable
Trays etc without insulation passing through Fire Rated walls & Floors made of concrete, masonry, Metal, Gypsum construction to Rupees Six Hundred
provide up to 2 Hours insulation & Integrity. Fire rated Acrylic Sealant is manufactured to have a density of 1.56g/cm3 and reaction to fire Ninety Five Only
Class E as per EN - 15651 - 1 and can be used as smoke seal in any joint or annual space. The product is UL Listed.
Public Addressing Solution: Rupees Twenty
Supplying, installation, testing & commissioning of 6 zone, voice alarm controller with USB, MP4 player (including 6 zone button paging Seven Thousand
593 1.00 station) with seamless integration facility with main fire alarm panel for voice evacuation complete as required. NO 27,216.10 Two Hundred
Sixteen and Ten
Supplying, installation, testing & commissioning of 1.5/3/6W metal box ceiling/wall speakers complete as required.
Hundred Two and
Fifty Four Paise Only
Schedule B Page 97 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
Supplying, installation, testing & commissioning of Voice command keypad 6 zone, with microphone assembly complete as required.
Rupees Seventy Two
595 1.00 NO 72,415.25 Hundred Fifteen and
Twenty Five Paise
Supplying, installation, testing & commissioning of exit point directional sound speaker with voice and integral audio amplifier with Rupees Eight
selectable sound pulse patterns complete as required. Thousand Nine
596 15.00 NO 8,998.31 Hundred Ninety
Eight and Thirty One
Supplying, installation, testing & commissioning of digital audio amplifier 75 Watt, 25V rms operating at 240 Volt AC Supply complete as Rupees One Lakh
required. Twenty Nine
Five and Forty Two
Building Management Solution:
Supplying, installing, testing and commissioning of BMS Computer System: i7 Processor or Equivalet Server PC with 32 GB RAM, & 512 GB
Rupees Two Lakh
SSD with 1 TB HDD, 10/100 Mbps Ethernet card, USB connection & internal modem, Microsoft(R) Windows(R) 7 OS Professional
Twenty Thousand
598 1.00 Enterprise, Web server software, 100/1000 Mbps NIC for Network connection and anti virus software with 32" colour graphics monitor as NO 2,20,320.00
per Tender Specifications. Accessories included Optical Mouse, Key Pad, Laserjet colour A4 printer with the above BMS System
configuration. Windows Licensed software compatible with the BMS platform etc. complete as required.
Application Software
Supplying, installing, testing and commissioning of the following window based graphical software for IBMS system with 2 Nos Client for
Operator workstation. 10000 hard/soft I/Os to be considered and shall have provision of future expansion. The following software
packages shall have below minimum features and compliances.
a) 3D & HD vector dynamic graphics with Autocad import of plan with Zoom In & Zoom Out facility
b) Native 64 Bit System , BTL,UL,EN Certified System, BACnet Profile B-AWS (Advanced workstation) as per the BTL Listing
c) Multi-Monitor Support-( Min 4 Nos), Multi-language support,Object tracking on multiple cameras
d) Certified OPC DA Server by OPC Foundation
e) HTML5 based Web-Server software shall permit use of Standard Web-Browsers such as Microsoft Edge, Google Chrome, Mozilla
Rupees Sixty Nine
Lakh Forty Five
f) The Software shall comply to international standards and strive to deliver products that meet security standards such as ISA/IEC
599 1.00 NO 69,45,314.00 Thousand Three
62443, UL2900, ISO/IEC 27001, ISO/IEC62443 and OWASP
Hundred Fourteen
g) Cybersecurity SL2, Seamless integration of Security certificates within customer IT infrastructure, Microsoft’s active directory-based
authentication, LDAP integration, Use of network infrastructure that supports physical network or VLAN segmentation, End-to-end
encryption from client to server, End-to-end encryption between servers, Certificate-based data exchange, Encrypted backups
h) Audit Trail , 4-Eye Principle, Data Point Validation, Verified tempering evidence for report transmission
i) The software shall integrate with BIM data seamlessly
j) Ability to provide data to other systems thru OPC DA Server and / Or Rest web services interface
k) Reports - Customized reports for Trends and alarm with Graphic screen shots.
l) Seamless integration of Fire alarm system should be there.
m) Alarm Escalation: Assisted treatment of alarms which helps in Predefined & fast intervention steps for faster response
n) Energy dashboards having cockpit view of total energy utilized. Energy and Power reports.
Schedule B Page 98 of 136 SIGNATURE STAMP OF BIDDER
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
Supplying, installing, testing and commissioning of True IP Based DDC Standalone 32 Bit Intelligent, peer to peer communication,
interoperable DDC as per the specification. The compact controller shall have inbuilt 2-port Ethernet switch . The DDC shall have Min
Mhz processor with 128 MByte SDRAM (DDR3) and 512 MByte NAND Flash. DDC Controller shall be equipped with a battery-free real-
time clock with backup for min 7 days using super capacitor. The controller shall be freely programmable and have System functions
(alarming, scheduling, trending, access protection with individually definable user profiles and categories). It should have WLAN interface, Rupees Eleven Lakh
Cloud connectivity for remote access and inbuilt port for POT for local interface. It should Support of the major communication Fifty Thousand Two
protocols: BACnet,/IP, BACnet MS/TP, Modbus IP, Modbus RS-485 and Modbus RTU Note: Comissioning tool should not be dependent Hundred Thirty Six
on any license / dongle and no extra cost should be charged. The above shall be housed in vandal proof, lockable & secure MS Cabinets to Only
be supplied along with all necessary switchgear protections as required. Number of controllers shall have spare capacity of 15% for future
DDC Panel for VRF / VRV system
Supplying, installing, testing and commissioning of True IP Based DDC Standalone 32 Bit Intelligent, peer to peer communication,
interoperable DDC as per the specification. The compact controller shall have inbuilt 2-port Ethernet switch . The DDC shall have Min
Mhz processor with 128 MByte SDRAM (DDR3) and 512 MByte NAND Flash. DDC Controller shall be equipped with a battery-free real-
time clock with backup for min 7 days using super capacitor. The controller shall be freely programmable and have System functions
(alarming, scheduling, trending, access protection with individually definable user profiles and categories). It should have WLAN interface, Rupees Three Lakh
Cloud connectivity for remote access and inbuilt port for POT for local interface. It should Support of the major communication Five Thousand One
protocols: BACnet,/IP, BACnet MS/TP, Modbus IP, Modbus RS-485 and Modbus RTU Note: Comissioning tool should not be dependent Hundred Sixty Seven
on any license / dongle and no extra cost should be charged. The above shall be housed in vandal proof, lockable & secure MS Cabinets to Only
be supplied along with all necessary switchgear protections as required. Number of controllers shall have spare capacity of 15% for future
DDC Panel for AHU + TFA + CSU + Air washer & scrubber ( Max 2 Equipment in 1 DDC)
Supplying, installing, testing and commissioning of True IP Based DDC Standalone 32 Bit Intelligent, peer to peer communication,
interoperable DDC as per the specification. The compact controller shall have inbuilt 2-port Ethernet switch . The DDC shall have Min
Mhz processor with 128 MByte SDRAM (DDR3) and 512 MByte NAND Flash. DDC Controller shall be equipped with a battery-free real-
time clock with backup for min 7 days using super capacitor. The controller shall be freely programmable and have System functions
(alarming, scheduling, trending, access protection with individually definable user profiles and categories). It should have WLAN interface, Rupees One Lakh
Cloud connectivity for remote access and inbuilt port for POT for local interface. It should Support of the major communication Ninety Six Thousand
protocols: BACnet,/IP, BACnet MS/TP, Modbus IP, Modbus RS-485 and Modbus RTU Note: Comissioning tool should not be dependent Six Hundred Forty
on any license / dongle and no extra cost should be charged. The above shall be housed in vandal proof, lockable & secure MS Cabinets to Nine Only
be supplied along with all necessary switchgear protections as required. Number of controllers shall have spare capacity of 15% for future
DDC Panel for Ventilation Fans System (Max 8 Fans in 1 DDC)
Schedule B Page 99 of 136 SIGNATURE STAMP OF BIDDER
Name of Work: Construction of New Academic Block at PDU Medical College, Rajkot, Gujarat. Schedule - B
Sr. Estimated Rate Total
Estimate Qty. Description of item Unit
In Figure In Word
Supplying, installing, testing and commissioning of True IP Based DDC Standalone 32 Bit Intelligent, peer to peer communication,
interoperable DDC as per the specification. The compact controller shall have inbuilt 2-port Ethernet switch . The DDC shall have Min
Mhz processor with 128 MByte SDRAM (DDR3) and 512 MByte NAND Flash. DDC Controller shall be equipped with a battery-free real-
time clock with backup for min 7 days using super capacitor. The controller shall be freely programmable and have System functions
(alarming, scheduling, trending, access protection with individually definable user profiles and categories). It should have WLAN interface, Rupees One Lakh
Cloud connectivity for remote access and inbuilt port for POT for local interface. It should Support of the major communication Forty Four Thousand
protocols: BACnet,/IP, BACnet MS/TP, Modbus IP, Modbus RS-485 and Modbus RTU Note: Comissioning tool should not be dependent Seven Hundred Eight
on any license / dongle and no extra cost should be charged. The above shall be housed in vandal proof, lockable & secure MS Cabinets to Only
be supplied along with all necessary switchgear protections as required. Number of controllers shall have spare capacity of 15% for future
DDC Panel for Transformer
Supplying, installing, testing and commissioning of True IP Based DDC Standalone 32 Bit Intelligent, peer to peer communication,
interoperable DDC as per the specification. The compact controller shall have inbuilt 2-port Ethernet switch . The DDC shall have Min
Mhz processor with 128 MByte SDRAM (DDR3) and 512 MByte NAND Flash. DDC Controller shall be equipped with a battery-free real-
time clock with backup for min 7 days using super capacitor. The controller shall be freely programmable and have System functions
(alarming, scheduling, trending, access protection with individually definable user profiles and categories). It should have WLAN interface, Rupees Four Lakh
Cloud connectivity for remote access and inbuilt port for POT for local interface. It should Support of the major communication Ninety Five
protocols: BACnet,/IP, BACnet MS/TP, Modbus IP, Modbus RS-485 and Modbus RTU Note: Comissioning tool should not be dependent Thousand Forty
on any license / dongle and no extra cost should be charged. The above shall be housed in vandal proof, lockable & secure MS Cabinets to Three Only
be supplied along with all necessary switchgear protections as required. Number of controllers shall have spare capacity of 15% for future
DDC Panel for Electrical system -HT/LT System
Supplying, installing, testing and commissioning of True IP Based DDC Standalone 32 Bit Intelligent, peer to peer communication,
interoperable DDC as per the specification. The compact controller shall have inbuilt 2-port Ethernet switch . The DDC shall have Min
Mhz processor with 128 MByte SDRAM (DDR3) and 512 MByte NAND Flash. DDC Controller shall be equipped with a battery-free real-
time clock with backup for min 7 days using super capacitor. The controller shall be freely programmable and have System functions
(alarming, scheduling, trending, access protection with individually definable user profiles and categories). It should have WLAN interface, Rupees Two Lakh
Cloud connectivity for remote access and inbuilt port for POT for local interface. It should Support of the major communication Thirteen Thousand
protocols: BACnet,/IP, BACnet MS/TP, Modbus IP, Modbus RS-485 and Modbus RTU Note: Comissioning tool should not be dependent Seven Hundred
on any license / dongle and no extra cost should be charged. The above shall be housed in vandal proof, lockable & secure MS Cabinets to Ninety Three Only
be supplied along with all necessary switchgear protections as required. Number of controllers shall have spare capacity of 15% for future
DDC Panel for Electrical system -DG System
Schedule B Page 100 of 136 SIGNATURE STAMP OF BIDDER
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
03-Specification Plumbing Work.pdf
04-General Technical Specifications Electrical Works.pdf
05-Specifications Safety Norms.pdf
06-Specifitions Shuttring.pdf
07-Specifications_ELV 17.7.24.pdf
08-Specification Fire fighting Work.pdf
09-Special Condition.pdf
11-Instruction on site.pdf
12-Defects Libility GR R B.pdf
13-GR-Cement Cosmptn TMT.pdf
14-Labour Cess - GR - Page-01 (1).pdf
15-Labour Cess - GR - Page-02 (1).pdf
16-Labour Cess - GR - Page-03.pdf
17-Above below GR.pdf
18-GTS Ele.pdf
19-ijaradar-ok.pdf
10 6372 Make List HO 15.10.2025-1.pdf
20.1-GTS Civil compressed.pdf
20-GTS Civil compressed.pdf
05. GENERAL TECHNICAL SPECIFICATION.pdf
06. CIVIL SPECIFICATION.pdf
09.1 Performance Bond and Bitumen date(1) (1).pdf
11A-Testing Schedule Dt.24-10-1994.pdf
11-Standards for Cement Con. Dt.11-5-2017.pdf
12. ELECTRICAL INSTRUCTION 2023-24.pdf
12A-GR Regarding Laplength in Reinforcement Dt.15-2-2017.pdf
13-Single Tender GR Dt.18-2-2017.pdf
22. Above below GR.pdf
22-Special Conditions-07-02-2025.pdf
Minimum 1 Test in GERI new.pdf
INSURANCE.pdf
01.-SBD - ACADEMIC BLOCK RAJKOT_R4.pdf
SCHEDULE B.pdf
03_2-Technical Specification Plumbing_R1.pdf
03_3-Technical Specification Fire Fighting_R1.pdf
03_1_ Technical Specification Civil_R2_compressed.pdf
03_4_Technical Specification_ELECTRICAL.pdf
03_5_Technical Specification_ELV.pdf
03_7_Technical Specification_Lift.pdf
03_8_Technical Specification_HVAC.pdf
03_9_ Technical Specification Credit Note.pdf
04. Special Condition of Contract.pdf
05A. Standard of Work_Applicable.pdf
06.Building-Specification-Part-I.pdf
06.Building-Specification-Part-II.pdf
06.Building-Specification-Part-III.pdf
06.Building-Specification-Part-IV.pdf
06A Special Condition of Contract - 2.pdf
06B Health Safety Work - Undetaking.pdf
07 General Condition of Contract.pdf
07.Electrcial specification booklet_1.pdf
07.Electrcial specification booklet_2.pdf
07.Electrcial specification booklet_3.pdf
07.Electrcial specification booklet_4.pdf
07.Electrcial specification booklet_5.pdf
07.Electrcial specification booklet_7.pdf
07.Electrcial specification booklet_6.pdf
07.Electrcial specification booklet_8.pdf
08 Make List.pdf
20-RAJKOT ACADEMIC DRW PDF_compressed.pdf
Specification Checklist.pdf
11- Take care on site.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .