RENEWAL / REPLACEMENT OF FURNITURE AT ARMY AREA JODHPUR UNDER GE (ARMY) NO. 01

Amount

Table Dressing Ladies w/Stool (FD/MAP-II/07) All wood work shall be first class hard wood, TW . Top/side/drawer/bottom/back shall be made of 18 mm thick pre-laminated particle board exterior grade. Full panel MS drawer slide ivory colour powder coated of Size 54 mm(H)x300mm(L) (Make-Ebco/Hettich/Godrej) with 9 mm thick Prelaminated Particle Board BSL exterior grade bottom and front and rear shall be 18 mm thick prelaminated particle Board BSD exterior grade. 01 Nos Std quality magnetic catcher (make-Ebco/Hettich/Godrej) shall be provided to each shutters. S S handle shall be provided to drawer / shutter as per sample kept in BSO yard. Heavy duty Concealed hinges (Make - Ebco/Hettich/Godrej) shall be provide to each shutter with lock (Make-Ebco/Hettich/Godrej).Std quality Cam lock connector/dowels fastening /universal angle/PVC corner shall be used in fabrication of body/structure of item. 1.6/0.9 mm thick PVC edging shall be provided wherever required with edge bander machine as directed by Engr-in-Charge. Cushion of stool dressing shall be 40 density with tapestry/rexine of range not less than Rs. 350/RM. Quality of tapestry/rexine as per sample kept in yard. All exposed wooden surfaces shall be high glossy melamine polish . Rest all as shown on drg and as directed by EIC.

Sofa set 5 Seater (FD- 281/373) All as shown on drawing. All wood work shall be first class HW well seasoned teakwood with permissible moisture contents as per IS-287-1973. Cushion for seat & back shall be 110mm thick PU foam 40 density covered with good quality, tapestry cloth not less than Rs. 350/- RM. Tapestry as per sample kept at BSO Yard. PVC shoe shall be provided to each legs. All wooden portions shall be smoothened to apply best quality water base PU polish glossy finish Polish work with spray machine shall be done at BSO Yard. Rest all as per drg or as directed by EIC.

Description of Work / Item(s)

Amount

Almirah Large Steel (1/2 H 1/2 SH ) (FD/E6/MAP/18) All as shown on drawing. Overall size shall be 910mm long 490 mm wide and 1900mm high. CRCA Sheet to be used shall be 20 gauge thick for entire body, shelves and legs irrespective of what is shown on drg. Front shutters shall have two leaves. All joints, welding & fixing shall be done in accordance with the standard workmanship and specification shown in drawing. A three-way locking device controlled by a brass lock and operated by a chromium plated metallic S -Type handle - 01 No shall be provided. CP Handle and Locking arrangement with duplicate key shall be provided to the drawer and locker both . 04 Nos Plastic insert moulded screw leg cum leveler (plinth Screw) used with cross nut or self tapping insert shall be provided to legs as approved by Engr-in-charge . All steel surfaces shall be powder coated. The shade of powder coating shall be as approved by GE and in dual/contrast colour. Rest all as shown on drg and as directed by EIC.

Bed Hard Steel (FD/E6/MAP/08 (R)) All as shown on drawing. The complete frame work shall be made of CRCA box section with 18 gauge . Long rails and short rail shall be made of 25mm x 65mm box section of 18 gauge. Frame work for foot/head board shall be 18mm x 18mm box section of 18 gauge. The bed top shall be 12 mm thick plywood top BWR grade confirming to IS 303 (Make: Greenply/Archidply/Century ply). The main frame work for foot/head board along with legs shall be made out of CRCA box section of 38mm x 38mm with 18 G thick. The foot board / head board shall be covered with 18mm thick prelemintated particle board exterior grade with 0.8 mm thick PVC edging with edge bender machine. Detachable head Complete and foot Complete shall be provided with hard top. All metal work shall be powder coated (Black) . All joints / gaps shall be filled with metal putty / primer before powder coating. Welding process shall be of MIG or MAG and complete . Inner hard rubber shoe shall be provided to each legs. Complete all as shown on drg and as directed by EIC.

Locker bed Side Steel (FD-1029) All as shown on drawing. Overall size shall be 760mm long, 600mm wide and 1100mm high. All CRCA steel sheets shall be of 20 gauge. All steel surfaces ext/int shall be provided with two coats of synthetic enamelled paint over a coat of primer with spray machine after preparation of surface with putty. Hammer tone finish/Contrast colour or as directed shall be applied on body and shutters. Colour shall be approved by GE. Rest all as shown on drg and as directed by EIC.

Charpoy IP hard top (FD/MAP-II/01) Over all size shall be 1980mm long x 900mm wide x 440mm high. Frame and leg shall be made of 32mm x 32mm x 16 gauge MS tube 03 Nos stiffeners of 25mm x 25mm x 16 gauge shall be provided however only 02 Nos stiffeners have shown on drg. Top shall be made of 12 mm thick plywood top BWR grade confirming to IS 303 (Make: Greenply/Archidply/Century ply). All metal work shall be powder coating (Black). All joints/gaps shall be filled with metal putty/primer before powder coating. Welding process shall be MIG or MAG and complete. Inner hard rubber shoe shall be provided to each legs. Rest all as shown on drg and as directed by EIC.

Table 3 x 2 without drawer (FD-1007) All as shown on drawing. Overall size shall be 900 mm x 600 mm x 760 mm. Steel frame shall be of 800 mm x 500 mm x 742 mm. Frame shall be made of 25 mm square CRCA tube with 16 gauge wall thickness. Frame shall be CRCA steel 25mm square and 1.6mm thick. The top shall be made of 18mm thick pre-laminated particle board exterior grade-I, type-II with all edges covered with 1.6 mm thick PVC edge-banding with auto lipped through feed CNC machine. All steel surfaces shall be painted with two coats of synthetic enamel paint over a coat of red oxide primer with spray machine .Painting work with spray machine shall be done at BSO Yard. Colour shall be approved by GE/EIC. Complete all as shown on drg and as directed by EIC.

Table 900 x 600 with drawer steel (FD/MAP-II/01) All as shown on drawing. Overall size shall be 900 mm x 600 mm x 760 mm. Steel frame shall be of 800 mm x 500 mm x 742 mm. Frame shall be made of 25 mm square CRCA tube with 16 gauge wall thickness. A drawer on left side of table near top stiffener shall be provided of size 350mm x 130 mm and 500mm deep with locking arrangement. Brass locks shall be provided to each drawer. Std quality PVC Inner shoe shall be provided to each legs. Heavy quality telescopic channel shall be provided to each drawers. S/S handles shall be provided to drawer as sample kept at BSO yard. Table top shall be made of 18 mm thick pre-laminated particle board exterior grade with 1.6mm thick PVC edge-banding with auto-lipped through-feed. All steel surfaces shall be painted with two coats of synthetic enamel paint over a coat of red oxide primer with spray machine .Painting work with spray machine shall be done at BSO Yard. Colour shall be approved by GE/EIC. Complete all as shown on drg and as directed by EIC.

Table 900 x 900 steel (FD-1009) All as shown on drawing. Overall size shall be 900 mm x 900 mm x 760 mm. Steel frame shall be of 800 mm x 800 mm x 742 mm. Frame shall be made of 25 mm square CRCA tube with 16 gauge wall thickness. Frame shall be CRCA steel 25mm square and 1.6mm thick. The top shall be made of 18mm thick pre-laminated particle board exterior grade-I, type-II with all edges covered with 1.6 mm thick PVC edge banding with auto lipped through feed CNC machine. All steel surfaces shall be painted with two coats of synthetic enamel paint over a coat of red oxide primer with spray machine .Painting work with spray machine shall be done at BSO Yard. Colour shall be approved by GE/EIC. Complete all as shown on drg and as directed by EIC.

Table bed side MAP (FD/E6/MAP/15 (R)) The complete frame work shall be made of CRCA box section with 18 gauge .Sides , top rail of size 18 mm x 18 mm x 18 G shall be provided to frame. Sides/top/back/complete drawers except bottom shall be made with 18 mm thick prelaminated MDF Board BSD exterior grade and bottom of drawer shall be made with 8 mm thick prelaminated MDF Board BSD exterior grade complete. Steel frame shall be powder coated. Std quality telescopic channel (Ebco/Hettich) should be provided in lieu of TW runner for smooth movement of drawer. Std quality Cam lock connector/dowels fastening/universal angle/PVC corner/CSK head screw brown colour shall be used in fabrication body/structure of item with 1.6 mm thick PVC edging banding with auto lipped through feed CNC Machine provided wherever required as directed by Engr-in-Charge. Inner hard rubber shoe shall be provided to each legs. Rest all as per drg and as directed by EIC.

Ladder allum Top (FD-1025) All as shown on drawing. Overall size of aluminium ladder shall be 2310mm long and 363.5 mm wide. The clear space between the stringers shall be 300mm.Two aluminium strigers 60mmx31.75mm made in 'C' shape and 3.18mm thick aluminium shall be 2310mm long and joined together with aluminium rungs of aluminium conduit fluted pipe rungs ends bent to shape as show on drawing. Eight aluminium rungs of aluminium conduit pipe of wall thickness not less than 2.43mm shall be equally spaced after leaving 150mmfrom bottom and top. Hard rubber Cap/Shoes shall be provided to bottom and top of aluminium stringers. Complete all as per drawing and as directed by Engr-in-Charge.

ASHOKA FURNITURES

Shri Maruti Trading Co.

Rana Construction Co

BHARAT BUILDERS

Apsara Industries

Capital Construction Company

Rana Construction Co

Shri Maruti Trading Co.

Capital Construction Company

BHARAT BUILDERS

Apsara Industries

ASHOKA FURNITURES