GE CHD T 100 2025 26

Taking down Cement plaster or cement lime plaster on brick or stone walls including raking out joints, hacking for key & scrubbing down with water etc complete including disposal of unserviceable rubbish outside cantt area all as specified and directed by Engineer-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete including disposal of unserviceable rubbish outside cantt area all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete (reinforced) (reinforcement cut as required to facilitate demolition) as in roofs, floors (other than ground floors) beams, slabs, staircases, landing, chajjas and similar suspended work complete including disposal of unserviceable rubbish outside cantt area all as specified and directed by Engineer-in-Charge.

Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc, removing rubbish off the premises complete all as specified and directed by Engineer-in-Charge.

Dismanting of cement concrete of any description not otherwise provided for inany location and any position complete including disposal of unserviceable rubbish outside cantt area all as specified and directed by Engineer-in-Charge.

Taking down chowkhats or frames n.exc 1.5 sqm each (without taking off shutter from the frame) and removing from the site including dismantling brick work of hold fasts complete all as specified and directed by Engineer-in-Charge.

Taking down chowkhats or frames exc 1.5 sqm but n.exc 4 sqm each (without taking off shutter from the frame) and removing from the site including dismantling brick work of hold fasts etc complete all as specified and directed by Engineer-in-Charge.

Taking down old 100 mm bore, PVC (SWR) pipes single socketed, including all fitting like trapes, bends,junctions etc complete all as specified and directed by Engineer-in-Charge.

Taking down old 75 mm bore, PVC (SWR) pipes single socketed, including all fitting like trapes, bends,junctions etc complete all as specified and directed by Engineer-in-Charge.

Dismanting of mild steel work of any description not otherwise provided for inany location and any position complete all as specified and directed by Engineer-in-Charge.

Dismantling boarding, any description, fixed in any position with nails complete including disposal of unserviceable rubbish outside cantt area all as specified and directed by Engineer-in-Charge.

Taking up or down steel tubing and connections of 25mm bore in pipe, including cleaning for re-fixing or removal from site to store complete all as specified and directed by Engineer-in-Charge.

Taking up or down steel tubing and connections of 20mm bore in pipe, including cleaning for re-fixing or removal from site to store complete all as specified and directed by Engineer-in-Charge.

Cutting chases in stone wall, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring etc., and making good, cutting not exc 10 cm girth and complete all as specified and directed by Engineer-in-Charge.

Demolition of brick work or stone/boulder masonary built in cement mortar incl all quions arches, pillar or any other descrption etc complete including disposal of unserviceable rubbish outside cantt area all as specified and directed by Engineer-in-Charge.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets from any position complete including disposal of unserviceable rubbish outside cantt area all as specified and directed by Engineer in Charge.

Dismantlling plain or corrugated steel sheeting in roof coverings in any position complete including disposal of unserviceable fillets outside cantt area all as specified and directed by Engineer in Charge.

Dismantling timber scantlings as in rails, posts, rafters, purlins etc under 40 Sq cm in section from any situation complete all as specified and directed by Engineer in Charge.

Disconnecting existing tanks of capacity 2000 ltr, setting aside and removing from site complete all as specified and directed by Engineer-in-Charge.

Hacking out old broken glass (any thickness, size, quality or description) from wooden ,iron frames ,glazed with putty or fixed with beads including punching or drilling out glazing pins/spring clips complete, all as specified and as directed by Engr-in-charge.

Disconnecting existing tanks of capacity 2000 ltr, setting aside and removing from site complete all as specified and directed by Engineer-in-Charge.

75 mm thick, cement concrete type C-2, 1:3:6 using 40 mm graded stone aggregate, finished even & smooth without using extra cement, as in plinth protection, complete all as specified.Plinth protection shall be laid in 1:20 slope and joint filling sealed with bituminous sealing compound grade "A" .

Forming contraction joint ( Dummy) 10mm wide and 25mm deep filled with sealing compound Grade 'A' complete all as specified and directed by Engineer-in-Charge.

Plain cement concrete (1:4:8) type D-2,using 40 mm graded stone aggregate as in foundations, filling and mass concrete, sub base to paver blocks etc complete all as specified and directed by Engineer-in-Charge.

Reinforced Cement Concrete Design Mix M-25 using 20mm graded mechanically crushed stone aggregate as in foundations including rafts,footings,foundation beams,plinth beams,bases for columns, basement slabs,under reamed piles and mass concrete and the like complete all as specified and directed by Engineer-in-Charge.

Reinforced Cement Concrete Design Mix M-25 using 20mm graded mechanically crushed stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed by Engineer-in-Charge.

Use & waste of formwork to sides of concrete foundation, footings, bases of columns, raft and raft beams, sides and soffits of foundation and plinth beams and similar works, vertical or to batter surfaces of concrete etc. (rough finished flat surfaces of concrete), complete all as specified and directed by Engineer-in-Charge.

Use & waste of Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings , slab over manholes similar work; not exceeding 200mm thick (Horizontal or sloping) (rough finished flat surfaces of concrete), complete all as specified and directed by Engineer-in-Charge.

TMT steel bars 10mm dia and over, of grade Fe-500D cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge.

Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete all as specified and directed by Engineer-in-Charge.

First quality Non - skid coloured Ceramic tiles 9 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm as in floors etc. set and jointed with 4 mm spacer and grouting the joint of flooring with epoxy grout mix of organic coated filler of desired shade,hardener ,resin in the ratio of 8:1:2 laid over and inculding 15 mm thick screed in cement mortar (1:4) complete all as specified and directed by Engineer-in-Charge.

First quality Non - skid coloured Ceramic tiles 9 mm thick (square/ rectangular) area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm as in floors etc. set and jointed with 4 mm spacer and grouting the joint of flooring with epoxy grout mix of organic coated filler of desired shade,hardener ,resin in the ratio of 8:1:2 laid over and inculding 15 mm thick screed in cement mortar (1:4) complete all as specified and directed by Engineer-in-Charge.

Glazed ceramic coloured tiles 1200 x 600 x 8 mm thick on vertical surface such as skirting , dado etc. over and including 10 mm thick rendering in CM 1:4 thick set and jointed with 4 mm spacer and grouting the joint of wall with epoxy grout mix of organic coated filler of desired shade, hardener, resin in the ratio of 8:1:2 complete all as specified and directed by Engineer-in-Charge.

Granite black shade, 16-18 mm thick, (table rubbed and polished) in single piece (in one direction) machine cut, machine polished, bedded and jointed with adhesive suitable for granite/stone & pointed with grout of matching shade including necessary cutting over & including 15 mm thick (average thickness) cement mortar (1:4) screed, as in cooking platform, shelves, RCC counters, window cills & similar situations, complete all as specified and directed by Engineer-in-Charge.

Brick work with sub class 'B' bricks, class designation 7.5, old size bricks, straight or curved on plan exceeding 6.00 metre mean radius built in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge.

Rendering 15 mm thick in cement mortar 1:6, on fair faces of brick or concrete surfaces, trowelled to even and smooth without using extra cement in patches, complete all as specified and directed by Engineer-in-Charge.

Rendering 15 mm thick in cement mortar 1:4, on brick or concrete surfaces in two layers mixed with water proofing compound on top layer, trowelled to even and smooth without using extra cement in patches, complete all as specified and directed by Engineer-in-Charge. NOTE: Water proofing compound shall be measured and paid separately.

Supply only liquid water proofing comound ISI Marked complete all as specified and directed.

Preparation of new surfaces of Walls by brooming down and applying 1mm thick white cement based wall care putty after applying emery paper or sand paper complete all as specified and directed by Engineer-in-Charge.

Preparation of new plastered surfaces of wall and applying two coats of oil bound distemper on walls over and including a coat of primer complete all as specified and directed.

Preparation of new external surfaces of walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over new surfaces as per manufacturers instructions etc complete all as specified and directed by Engineer-in-Charge.

Stainless steel butt hinges 100 mm long heavy weight complete all as specified and directed by Engineer-in-Charge.

Stainless steel handle D type with back plate and fixed with screws of size 150 mm complete all as specified and directed by Engineer-in-Charge.

Stainless steel, barrel tower bolts of extruded section with length of bolt 150 mm and dia of bolt not less than 10 mm,ISI marked complete all as specified and directed by Engineer-in-Charge.

Aluminium anodised sliding door bolts 300 mm long, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified & directed by Engineer in Charge.

Floor door stopper of aluminium alloy body single legged with rubber shoe 75 mm fixed to door shutter complete all as specified and directed by Engineer-in-Charge.

Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified and directed by Engineer-in-Charge.

Stainless steel handle, fancy type, 75 mm size and fixed in position with stainless steel screws, ISI marked, suitable for rubber wood shutter drawers, complete as per the sample kept in the office of Engineer-in-Charge.

1 mm thick mica coloured to match to be fixed with adhesive complete as specified and directed by Engineer-in-Charge.

Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with stainless steel wire staples complete all as specified and directed by Engineer-in-Charge.

Sheet glass 4 mm thick, ordinary quality and glazing with linseed oil pane putty & spring glazing clips using Silicon for fixing of glass in addition to glazing putty, in squares not exceeding 0.5 Sq. mtr in each pane, complete all as specified and directed by Engineer-in-Charge.

4 mm thick figured glass pin head type and glazing with oil putty in square not exc 0.5 sqm each and using Silicon for fixing of glass in addition to glazing putty complete all as specified and directed by Engineer-in-Charge.

Preparation of new or previously untreated steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge.

Preparation of old painted steel and iron surfaces of any description over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

19mm thick plywood BWR type BB, fixed with screws to timber frame work as in kitchen cabinets , cupboards etc, fixed in repair with both sided covered with 1 mm thick mica decorative face veneer with lipping / frame to match complete as specified and directed by Engineer-in-Charge.

Door strip ( snake Guard) minimum 18 mm wide aluminium body and nylon brushes 22 mm wide fixed with screws complete all as specified and directed by Engineer-in-Charge.

Supplying and fixing in repairs 15 mm fancy type chromium plated fancy type bib tap brass long body with flange screwed down high pressure CP cast copper alloy with crutch or butterfly handles screwed down suitable for 15mm bore pipe or union complete all as specified and directed by Engineer-in-Charge. Make:- Jaquar: CON-107KN, Somany: 272210150011, Cera: F2006152

Supplying and fixing in repairs stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, all as specified, of 15mm bore, fancy type, chromium plated with long shank and cup complete all as specified and directed by Engineer-in-Charge. Make:-Jaquar: CON: 059KN, Somany: 272210270041, Cera: F2006201.

Supplying and fixing in repairs wash hand basin mixer fancy type chromium plated, screwed down high pressure, with or without lettered 'Hot'or cold with cast copper alloy with capston head long screwed shanks and fly-nuts, screwed for iron pipe of 20mm bore and fixed complete all as specified and directed by Engineer-in-Charge. Make:- Jaquar:- CON-167KNB, Somany:- 272200150051, Cera:F200646.

Supplying and fixing fancy type shower rose 125mm dia size of Rim and 30cm long CP brass pipe with swiwel joint in including fixing to steel pipe or union complete all as specified and directed by Engineer-in-Charge. Make:- Jaquar: OHS-1789, Somany: 272221260011, Cera: 27222130011

PVC connections 15mm size with PTMT nuts of length 450mm fixed in repair complete all as specified and directed by Engineer-in-Charge.

S&F vitreous china (white) counter top wash basin in square/ round/ rectangular shape of standard size complete all as specified and directed.

Providing and fixing Kitchen Sink of size 48 X 18 (approx. 1219 mm X 455 mm) made of premium grade 304 stainless steel in black matt finish, double bowl, handmade with smooth edges, minimum 1.2mm thickness, corrosion-resistant, scratch-resistant, and easy-to-clean surface, suitable for modular kitchens; complete with waste coupling , drain pipe, and all necessary fittings, with provision for top mount or undermount installation as per site requirements, including proper sealing with approved grade sealant to prevent leakage and all work such as cutting, fixing, alignment, and making good the surrounding surface to match the existing finish as directed by the Engineer-in-Charge.

Supply and fixing in repair Towel (600mm long) rack stainless steel with peg set all as specified and directed.

Towel (150mm long) ring round shape of stainless steel with peg set all as specified and directed.

Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators,casements/sliding shutters and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with rawl plugs and screws or with fixing clips or with expansion hold fastener of required dia and size, including necessary filling up the gaps at junctions, i.e. at top,bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall not be less than 2 mm thick,smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle,Aluminium snap beading for glazing/ paneling. C.P. brass/ stainless steel screws,hinges/pivot and making provision for fixing of fittings wherever required complete all as specified and directed by Engineer-in-Charge. Note :1. The rate is inclusive of rollers,locks,rubber beading,rubber seal etc for sliding/casement shutters required for satisfactory operation of window/ventilator/door. 2. Panel fillings other than aluminium filling and necessary fittings shall be measured and paid for separately

PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm bore fixed in repair complete all as specified and directed by Engineer in Charge.

75mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls with and including MS clamps made out of flat iron of size 25 mm x 3 mm including nuts,bolts complete all as specified and directed by Engineer-in-Charge.

110 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls with and including MS clamps made out of flat iron of size 25 mm x 3 mm including nuts,bolts complete all as specified and directed by Engineer-in-Charge.

PVC(SWR) bends (any radius), for 75 mm bore pipes, with access doors, complete all as specified and directed by Engineer-in-Charge.

PVC(SWR) bends (any radius), for 110mm bore pipes, with access doors, complete all as specified and directed by Engineer-in-Charge.

PVC(SWR) vent cowl 75 mm bore pipes complete all as specified and directed by Engineer-in-Charge.

PVC(SWR) reducers 75 mm bore pipes complete all as specified and directed by Engineer-in-Charge.

PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

PVC (SWR) 'P’ trap 125/110.

Suply and fixing GI wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding, joists, etc. in walls, ceilings, stanchions, beams, etc. including all laps, cutting and waste complete all as specified and directed by Engineer-in-Charge.

Mild steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats et conforming to Fe-410 W(Gde E-250) quality B complete all as specified and directed by Engineer-in-Charge.

Mild Steel Framed work as in guard bars/grills, gratings, water tank platform etc.. with ends of bars shouldered/welded and/or riveted, or forged into spikes; framed guard bars/grills conforming to Fe-290 (Gde E-165) complete all as as specified and directed by Engineer-in-Charge.

Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified and as directed by Engr-in-charge.

Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in ridges, fascia, valleys, gutters etc. fixed with self tapping screws etc complete all as specified and as directed by Engr-in-charge.

CPVC(SDR-11) of outer dia 20 mm with and including CPVC SDR-11 fittings on walls and ceilings or laying in floors complete all as specified and directed by Engineer-in-Charge.

CPVC(SDR-11) of outer dia 25 mm with and including CPVC SDR-11 fittings on walls and ceilings or laying in floors complete all as specified and directed by Engineer-in-Charge.

CPVC SDR- 11 ball valve, ISI marked for CPVC pipe outer diameter 25 mm bore complete all as specified and directed by Engineer-in-Charge.

Supply and fixed in repair Brass chromum plated sink mixer for mixing hot and cold water fancy type with screwed down for 20mm dia iron pipe complete all as specified and directed by Engineer-in-Charge. Make:- Jaquar:- CON-167KNB, Somany:- 272200150051, Cera:F2006461.

Supply and fixed in repair Brass chromum plated wall mixer for mixing hot and cold water fancy type with screwed down for 20mm dia iron pipe complete all as specified and directed by Engineer-in-Charge. Make:- Jaquar:- CON-167KNB, Somany:- 272200150051, Cera:F2006461.

Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule of diameter 25 mm bore complete all as specified and directed by Engineer-in-Charge.

Stainless steel cutlery pan SS 304 grade basket of any description/pattern as approved by GE , shall be mounted on approved quality, high precsion innotech chalnnels/slides having minimum weight carrying capacity of 45 Kg, fixed with sliding channel, fixed to wood based frame work fixed in repairs complete all as specified and directed by Engineer-in-Charge. Note:- innotech channel measured and paid separately). Make:- Godrej, Hettich india, EBCO.

Material & labour for proving and fixing stainless steel ( grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and makng curvation (where ever required) and fiting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasterners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement. complete all as specified and directed.

Stainless steel handle, fancy type, 100 mm size and fixed in position with stainless steel screws, ISI marked, suitable for rubber wood shutter drawers, complete as per the sample kept in the office of Engineer-in-Charge.

50mm long magnatic catchers superior quality and fixed with screws complete all as specified and directed.

Stainless steel auto closing hinges (DADA) ,fixed with stainless steel screws to PVC/Wooden moulded shutters frame work in kitchen cabinets,cupboards etc complete all as specified and directed by Engineer-in-Charge.

Stainless steel innotech channel soft close 400-500 mm long fixed with stainless steel screws to PVC/Wooden moulded shutters frame work in kitchen cabinets,cupboards etc complete all as specified and directed by Engineer-in-Charge. Make:- Godrej, Hettich india, EBCO.

Supply and fixing corner glass shelf 225x225mm shall be 6 mm thick toughened glass with a polished edge. The frame shall be cinstructed of 25mm cp brass tubing with a bruched finish. Shelves shall be supported by adjusable shelf supports and have a wright capacity of 15 kg. The unit shall be installed using appropriate anchors for the wall type complete all as specified and directed by Engineer-in-charge. Make:-Jaquar: CPA CHR 1173,Somany: 272130120011,Cera: F5005102.

Supply and fixing in repair 20-25 mm dia curtain rod made of Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. and decorative balls/caps at both ends of rod with comp fitting complete all as specified.

Supplying and fixing in repairs Vitreous China floor mounted Wash down one piece water closet (Pedestal pattern), white including 10 ltr capacity PVC valveless syphonic action type flushing cistern, seat cover, fixing bolts complete all as specified and directed by Engineer-in-Charge.

Brass chromium plated bottle traps 32 mm bore for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and directed.

Supply and fixed in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed by Engineer-in-Charge. Make:- Jaquar: ALD-587, Somany: 272150680261& 272150031, Cera: F8030111AB.

Supplying and fixing in repairs waste pipe 32 mm dia flexible for Sink and WHB complete all as specified and directed by Engineer-in-Charge.

Toilet paper holder with flat recessed type stainless steel complete all as specified and directed by Engineer-in-Charge.

Providing and fixing Premium Stainless steel dish plate rack drainer (GTPT type) suitable for installation in modular kitchen cabinets, size 600mm, made of hight quality stainless steel with durable silver finish. The rack shall be designed for convenient storage and quick drying of plate and lower tier for cups/bowls-with proper drainage provision to avoid water accumulation. Construction shall be rust proof, corrosion-resistant, and easy to clean, with smooth edges and sturdy frame for long service life. The unite shall be supplied complete with all necessary fittings, brackets, and screws for secure mounting inside the cabinet, incuding alignment, fixing and making good any disturbed surface, all as per manufacture's specifications and as directed by Engineer-in-Charge.

Supply and fixing factory made uPVC Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately)

Supply and fixing in repairs 6mm thick Aluminnium composite panel as decorative choice fixed in aluminium panels complete all as specified and as directed by Engineer-in-Charge.

Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of maint runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm , suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1OOOmm length and L-shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.

INTERNAL ELECTRIC SUPPLY WORKS

Taking down old unserviceable light fittings any type and removal from site and making good disturbed surfaces of walls, ceiling etc complete all as specified and directed by Engineer-in-Charge to match with existing surface all as directed.

Taking down MCB DB/ Meter box of any size and disposal under schedule of credit and making good disturbed surfaces all as specified and directed.

Same all as per item No 110, One 3 pin 5 Amps socket outlet on independent board

Same all as per item No 110, One 3 pin 5 Amps socket outlet on same board with other switches

Same all as per item No 110, One bell/buzzeer point controlled by one bell push.

Sub main wiring using approved colour coding as per IS with two runs of 4 sqmm PVC insulated, unsheathed cable FRLSH, flame retardant low smoke and low halogen 1100 volts grade , ISI marked with multistranded copper conductor with one run of 4 sqmm (green colour) PVC insulated, unsheathed cable FRLSH, flame retardant low smoke and low halogen 1100 volts grade , ISI marked with multistranded copper conductor as earth wire connected to common earth dolly with thimbles, drawing into & including PVC Concealed conduit ISI marked with all accessories on walls and making good of disturbed surfaces including all conduit fittings, clamps, gutties etc all as specified and directed. Note: (i) Three runs ( main ) of 4.00 sqmm cable together with conduit shall be considered as 1 running meter for payment purpose.

Sub main wiring using approved colour coding as per IS with two runs of 6 sqmm PVC insulated, unsheathed cable FRLSH, flame retardant low smoke and low halogen 1100 volts grade , ISI marked with multistranded copper conductor with one run of 6 sqmm (green colour) PVC insulated, unsheathed cable FRLSH, flame retardant low smoke and low halogen 1100 volts grade , ISI marked with multistranded copper conductor as earth wire connected to common earth dolly with thimbles, drawing into & including PVC Concealed conduit ISI marked with all accessories on walls and making good of disturbed surfaces including all conduit fittings, clamps, gutties etc all as specified and directed. Note: (i) Three runs ( main ) of 6.00 sqmm cable together with conduit shall be considered as 1 running meter for payment purpose.

Modular snap Switch one way 6 Amps one module complete all as specified and directed.

Modular snap Switch one way 16 Amps one module complete all as specified and directed.

Modular Bell Push 6 Amps one module complete all as specified and directed.

Modular Socket 15/16Amps 5 Pin 2 Module complete all as specified and directed.

Modular Socket 5/6Amps 5 Pin 2 Module complete all as specified and directed.

Modular blanking plate suitable for 1 Module complete all as specified and directed

Modular fan Regulator step electronic type 2 module complete all as specified and directed.

Ceiling rose surface backlite 65 x 20mm size three terminal complete all as specified and directed.

Electric bell AC, ding-dong type, 230 Volt, single pole complete all as specified and directed.

Lamp holder, PVC/ Polycarbonate type with back plate with and including one no of LED bulb 15 watt Base-22 retrofit type complete all as specified & directed.

LED lights fitting 1x 20 Watt, 220V,AC decorative box type,aluminium body with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose including 20 watt LED tube rod complete all as specified and directed.

Security Light LED 60 Watt made up of pressure dia cast Alumunium housing with black epoxy powder coating with cover heat resistance glass safety input voltage range 170 to 270 volts, industrial model with IP-65 protection and other connected accessories including sevice bracket of GI pipe 32mm bore medium grade of length 0.9 mtr with MS clamps, bolts, nuts, and washers and suitable reducer for connecting fitting to GI pipe as required as site and making electrical connection, complete all as specified and directed.

Distribution Board double door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface mounting, MCB DB 12 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc flushed on the existing wall , to match with existing surface and making all necessary connections complete all as specified and directed.

Supply and fixing of decorative fancy light fitting 2X15 watt retrofit/ non retrofit type holder ( base B-22 or E-27 ) incl 02 Nos of LED bulb 15 watts with connector block, etc. complet with all accessories prewired and including connecting up with two core round flexible copper conductor cable in white with suitable size complete all as specified and directed.

ISOLATOR TPN 63 Amps, 415 volts complete all as specified and directed.

Supply and fixing post top lantern LED type 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete.

ISOLATOR SP 6- 40 Amps, 220 volts , 50 Hzs, 10 KA , "C" series, ISI marked all as specified and directed.

Supply and Fix MCB protected socket (Modular AC box) 4 module palstic box with 25A power unit complete all as specified and directed.

Supply and fixing LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Material and labour in replacement of sheet metal enclouser to accommodate 01 Nos electric meters of size 200 mm X 250 mm X 150 mm deep and 1.6 mm thick MS sheet, powder coated, bakelite sheet with hung shutter including provision of locking arragement and niche covered with 4 mm thick plain glass, including locking arrangement & open wiring coverd with flexible PVC pipe of suitable size complete all as specified and directed.

LED batten fitting 25 watt with opal diffuser ,IP20, battery backup upto 4 hrs.Fitting should have inbuilt 2 No's of Li-on battery of 2600mA each.Housing of fixture should be of extruded aluminium. Efficacy of fixture >100LPW,P>F>0.9,THD<30% complete all as specified and directed.

Exhaust fan 300 mm sweep metal body, heavy duty, Single phase AC 230/240V, with energy efficient motor, pre lubricated double ball bearing, speed 1200 rpm complete with louvers for wall mounting including grouting,making hole in the wall (Square/Round) as feasible grouting and holding down bolts, nuts, washers and provision of flexible copper conductor cable 3 core from ceiling rose to exhaust fan incl cutting of hole of required size for fixing of the exhaust fan complete all as specified and directed

Earthing complete with and including galvanised steel earth plate electrode 60 mm x 60 mm x 6 mm surrounded by a mixture of charcoal and salt in alternate layers burried directly in ground vertically in a pit of depth not less than 2.25 m deep below ground level with top edge of earth plate at a depth of not less than 1.5 m below ground level, connected with and including galvanised iron or steel earth wire, 4mm dia (No. 8 SWG) by means bolts, nuts, check nuts and washers made out of galvanised iron, 15 mm bore (light grade) GI pipe for protection of earthing lead, 20 mm bore (light grade) GI pipe for watering with funnel, wire mesh and including necessary excavation and earth work, PCC 1:2:4 type B-1 pit and 50 mm thick RCC M-25(Design mix) reinforced with XPM (weight not less than 3 kg/sq m) pit cover, C.I frame, charcoal and comman salt filling in alternate layers, complete all as shown and specified in electrical plate No. 3 of SSR Part-I (2009) complete all as shown on drawings and as specified and directed by Engineer-in-Charge. Note : The unit rate includes for protecton pipe 15mm and GI earth strip 4mm from top of earth plate upto 7.50 metre above ground level.

Note: For the purpose of arriving at lumpsum amount, the amount of credit schedule i.e Sch 'A' section II (i.e Rs 94233.25 shall be deducted from the total amount arrived.

Total of Schedule 'A' Rs.

Please Enable Macros to View BoQ information