OVER HAULING/REPAIRS TO SUMMER APPLIANCES AND CONNECTED ITEMS AND REPAIRS TO FOOTPATH HARD STANDING, DRAIN AND CERTAIN MISC EXTERNAL B/R SERVICES WORKS IN 524 UNIT AT MISA CAMP UNDER GE (S) TEZPUR

Amount

S&F in replacement of heating element of 2000 W (Round or Triangular Head as required at site) including rubber washer (ISI marked) etc complete all as specified and directed.

S&F in replacement of 450 mm long PVC connection suitable for hot & cold water supply with chromium plated brass screwed nuts at both ends with washers for making water connection of inlet & outlet from geyser to GI pipe 15 mm dia complete all as specified and directed.

S&F in replacement of thermostat suitable for water heater of any size/type complete all as specified and directed.

S&F in replacement PVC insulated & PVC Sheathed three core cable of size 1.5 sqmm with copper conductor 1100 Volts grade conforming to IS:694/1990 ISI all as specified and directed.

S&F in replacement of plug top 3 pin 16 amps ISI marked complete all as specified and directed.

Supply and fix Modular switch one way 20 Amp all as specified and directed.

Supply and fix Modular socket outlet 20 Amps all as specified and directed.

S & F in replacement of MCB SP 6-32 Amps, 240 V, 50 HZ breaking capacity 10KA, C series all as specified and directed.

M&L for wall fastener of size 100 mm long, 8 mm dia with double washers grouting making good in walls cement mortar (1:4) for fixing water heater, spilt AC outdoor after removing the existing unserviceable nuts /bolts and washers complete all as specified and directed.

S&F in replacement of sealed unit compressor suitable for Refrigerator/Deep Freezer of capacity up to 320 ltrs including sealing of the compressor with welding after assembling complete all as directed. Note: Rate of Refrigerant R-134a shall be included in quoted rate.

S&F in replacement of sealed unit compressor suitable for water cooler of capacity 40/80 Ltrs including sealing of the compressor with welding after assembling complete all as specified and directed. Note: Rate of Refrigerant R-134a shall be included in quoted rate.

S&F in replacement of relay suitable for Refrigerator/ Deep Freezer/water Cooler of any capacity complete all as specified and directed.

S&F in replacement of evaporator coil unit complete suitable for Refrigerator/Deep Freezer of any capacity complete all as specified and directed.

S&F in replacement of tap chromium plated 15 mm dia suitable for water cooler all as specified and directed.

S&F in replacement of filter strainer of suitable for Refrigerator/Deep Freezer/water cooler/ AC of any capacity all as specified and directed.

S&F in replacement of overload protector for Refrigerator/Deep Freezer/water coolers/AC all as specified and directed.

S&F in replacement of capacitor 6 MFD for AC/water cooler/Deep Freezer/Refrigerator complete all as specified and directed.

Supply and fix in replacement of ice chamber cabinet of Refrigerator of capacity up to 320 ltrs complete all as specified and directed. Note: Rate of Refrigerant R-134a shall be included in quoted rate.

M&L for leak testing with nitrogen dioxide and refilling with refrigerant R-134A as required for Refrigerator/Water Cooler/Deep Freezer and testing the cooling effect satisfactorily on full load. The filling of gas & testing shall be carried out in the presence of Engineer in charge, complete all as specified and directed. Note: Rate of Refrigerant R-134A shall be paid under relevant item.

S&F in replacement of thematically sealed compressor including sealing of the compressor with welding after assembling for 1.5/2.0 Ton Capacity Spilt type AC/ Window type AC complete all as specified and directed.

S&F in replacement of running capacitor 36-45 MFD for window type/Split type AC 1.5/2.0 Ton capacity complete all as specified and directed.

S&F in replacement of starting capacitor 80-120 MFD for window type/split type air conditioner 1.5/2.0 Ton capacity complete all as specified and directed.

S&F in replacement of box type relay suitable for 1.5/2.0 Ton Split type/window type AC complete all as specified and directed.

S&F in replacement of copper condenser coil unit complete for 1.5/2.0 Ton Split type/window type AC complete all as specified and directed.

S&F in replacement of capillary tube suitable for 1.5/2.0 Ton Split type/window type AC complete all as specified and directed..

S&F in replacement of fan blade with blower motor of window/split type AC 1.5/2.0 Ton, Refrigerator, deep freezer, water cooler capacity complete all as specified and directed.

S&F in replacement of control circuit (PCB) with remote device suitable for 1.5/2.0 Ton Split type AC complete all as specified and directed.

S&F in replacement of copper tube of size 1/2'' dia for connection of indoor and outdoor unit of split AC/window AC all as specified and directed.

S&F in replacement of copper tube of size 1/4'' dia for connection of indoor and outdoor unit of split AC all as specified and directed.

S&F in replacement of insulation cover of size 5/8" for insulating copper tube of split type AC all as specified and directed.

S&F in replacement of flair nut for tighting the inlet valve of gas of desire size for connection of indoor and outdoor of split AC all per directed by the Engineer-in-Charge.

S&F in replacement PVC insulated & PVC Sheathed three core cable of size 2.5 sqmm with copper conductor 1100 Volts grade conforming to IS:694/1990 ISI all as specified and directed.

M&L for leak testing with nitrogen dioxide and refilling with refrigerant as required for Split AC/Window AC and testing the cooling effect satisfactorily on full load and the filling of gas & testing shall be carried out in the presence of Engineer in charge, complete all as specified and directed. Note :- Rate of Refrigerant R-410A shall be paid under relevant item.

Supply only refrigerate R-134A for Refrigerator, Deep Freezer and water cooler of any capacity as specified and directed

Supply only refrigerate R-410A for Air Conditioner of any capacity, all as specified and directed

M&L for Shifting Split type AC 1.5/2.0 TR capacity including disconnection of out door & indoor unit, Re installed the same to new location after necessary servicing including testing and commissioning complete all as specified and directed.

S&F in replacement of AC support bracket of size 500x500 mm ('L' Shape) 2mm thickness suitable for carrying maximum load 200-250 Kg including necessary fixing arrangements for installation of outdoor unit of split type AC complete all as specified and directed.

S&F in replacement of Sheet metal enclosure with a two pin and earth plug and socket complete with one single pole MCB up to 32 Amps, 240 volts capacity and tested on completion complete all as specified and directed.

S&F in replacement of float valve assembly complete for water cooler 40/150 ltrs capacity water storage type all as specified and directed.

S&F in replacement of indoor unit of spilt AC of capacity 1.5 Ton wall mounted as per existing make required at site complete all as specified and directed.

M&L for servicing refrigerator/water cooler/deep freezer/air conditioner of any capacity after removing electric wire connection & cleaning of Cooling coil, Filter, etc. including testing to cooling complete all as specified and directed.

Taking down shutter of any description exc 1 Sqm but n'exc 2 Sqm each all as specified and directed.

Taking down cement plaster on brick walls incl racking out joints, hacking key & scrubbing down with water all as specified and directed.

Demolition cement concrete n'exc 15 cm thick (below or above ground level) all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing coat ), removing serviceable tiles to store and rubbish off the preemies all as specified and directed.

Dismantling water tanks and removing exc 500 but n exc 1000 ltrs capacity all as specified and directed.

Taking up or down 15mm bore steel water tubing & connections, including cleaning for refixing or removal to store all as specified and directed.

Taking up or down 20 mm bore steel water tubing & connections, including cleaning for refixing or removal to store all as specified and directed.

Dismantling of AC sheet corrugated / Semi corrugated sheets in wall cladding or in roof covering all as specified and directed.

M & L Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with L type J type or cranked hook bolts as specified and directed.

M & L Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall/eaves board, fixed with L type J type or cranked hook bolts as specified and directed

S & F 35 mm thick flush shutter , solid core construction ,with block board core and plywood face panel ,commercial type on both side all as specified and directed.

S & F 35 mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass gauge etc. Divided into squares with plain chamfered or rounded, rebated sash bars, sizes of the members of the shutters as specified and directed

S&F mild steel medium weight cold rolled butt hinges 100 mm long and all as specified and directed.

S&F aluminum anodized, barrel tower bolt of extruded section 150mm long all as specified and directed.

S&F 150mm long aluminum handle, cast type, anodized all as specified and directed.

S & F Stainless steel wire cloth 0.63 mm nominal dia of wire and avg width of aperture 1.40 mm and fixed with stainless steel wire staples all as specified and as directed

Hacking out old broken glass (any thickness, size, quality or description) from Metal Frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones all as specified and directed.

S & F 3 mm thick ordinary quality sheet glass in squares n.exc 0.5 sqm in each pane glazing with oil putty complete all as specified and directed.

S & F 3 mm thick figured glass in squares n.exc 0.5 sqm in each pane glazing with oil putty complete all as specified and directed.

S & F GI water tubes medium grade with all necessary fitting all as reqd complete of 15mm dia and fixed in walls & Floor etc all as specified and directed.

S&F tubes medium grade GI with all fittings fixed complete to walls and ceiling or laid in floors 20mm bore all as specified and directed.

S&F 500 Ltrs capacity rotational moulded polythene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed.

S&F 1000 Ltrs capacity rotational moulded polythene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed.

S&F 20 mm bore Ball valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 25mm-455gms) all as specified and directed.

S&F 25 mm Ball valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 25mm-455gms) fixed in repair of bore 25 mm all as specified and directed.

S&F vitrified Ceramic tiles 10 mm thick area of each tile not exceeding 0.36 sqm, in floors etc. set OVER 15mm thick screed bed in CM 1:6 and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed

-ditto- all as item above (Sl No. 69) but on skirting OVER 10mm thick backing coat in CM 1:4

S&F non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile 300mmx300 mm, in floors etc, set OVER 15mm thick screed bed in CM 1:6 and jointed in neat cement slurry and pointed in white or Coloured cement to match all as specified and directed.

S&F for colour Glazed ceramic tiles (250x350)/(450x350) of 7 to 8mm thick, in dado/skirting set OVER 10mm thick backing coat in CM 1:4and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed.

M & L for machine cut kota stone on flooring/staircase 20-25 mm thick over 15mm thick screed bed in CM 1:3 laid and jointed with grey cement slurry mixed and with pigment to match the shade of slab including rubbing/grinding and polishing complete all as specified and directed.

-ditto- all as item above but on skirting OVER 10mm thick backing coat in CM 1:3

Taking down existing damaged IWC/EWC along with complete PCC and line concrete from sunken floor and providing new IWC and water proofing treatment to sunken floor as per following stage :- (i) 15mm thick plastering in CM (1:2) with WPC at all around and base of sunken floor with proper slope. (ii) Applying a coat of 85/25 gde hot bitumen @ 0.7Kg/Sqm over a coat of bituminous primer @0.5Kg/Sqm and then plastering of polythene film, 150 micron, natural colour with cold cut back adhesive. (iii) Fixing of 25mm dia GI pipe (med gde) spout of length 45 cm. (iv) Supply & fixing of vitreous china squatting pan, "ORISSA" pattern or pedestal type, size 580x440mm white with integral footrest, P/S trap etc complete including providing PCC lean concrete in Mix 1:5:10 complete. all as specified and directed.

S&F in repairs Vitreous China wash hand basin white 550 x 400 mm including CP waste coupling and PVC Waste pipe fixed all as specified and directed.

S&F Vitreous China EWC wash down water closet (pedestal pattern, white ) including PVC Sheet cover fixed in repair all as specified and directed.

S&F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including lime concrete bedding 1:2 all as specified and directed.

S & F in repair PVC Low level flushing cistern 10 Ltr capacity including all fitting such as flush pipe brackets(Complete) all as specified and directed.

S &F in repair brass CP shower rose swivel type fix to iron pipe all as specified and directed.

S & F in repair 15mm Stop valves cast copper alloy with fancy type chromium plated with long shank and cup (Concealed Type) for iron pipe or for unions and fixed all as specified and directed.

S & F in repair 15mm Angle Stop valves cast copper alloy, fancy type with chromium plated for iron pipe or for unions and fixed all as specified and directed.

Dismantling and breaking up drain pipes AC /CI /PVC set in cement mortar 100mm/75mm bore.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or floor 110mm bore all as specified and directed. (Make Prince/Supreme/Kisan)

S&F PVC (SWR) bends any radius 110mm bore in repairs all as specified and directed.

S&F PVC (SWR) bends any radius 110mm bore with access door in repairs all as specified and directed.

S& F PVC(SWR) junction single (single 'T') equal or unequal 110mm bore all as specified and directed.

S&F PVC connection 15mm size with PTMT nuts of length 450mm complete fixed in repair all as specified and directed.

S&F pillar cock 15mm dia CP fancy type fixed in repair all as specified and directed.

M & L 10mm thick rendering in CM (1:6) on fair faces of brick work or concrete surfaces and finished the surface even & smooth without using extra cement all as specified and directed.

M & L 15mm thick rendering in CM(1:4) on fair faces of brick work or concrete surfaces and finished the surface even & smooth with WPC @ 2% by the weight of cement. (WPC Will be measured and paid separately).

Supply only integral water proofing compound all as specified and directed. (make: Dr Fixit/Pedilite/fosroc)or equalent

M&L 10mm thick (AVERAGE )ceiling plaster in CM (1:3) finished even and smooth without using extra cement all as specified and directed.

M & L two coats of synthetic enameled painting over 1 coat of pink primer to new wooden surfaces of any description exc 10 cm width or girth all as specified and directed.

M&L two coats of cement base paint over a coat of primer including preparation of new surfaces all as specified and directed.

M&L Applying two coats of Acrylic Emulsion distemper with a primer coat over a coat of 2 mm thick layer of wall care putty on walls including preparation of surface all as specified and directed.

M&L for preparing new plastered surface of wall and applying three coats of white wash incl cornice complete all as specified and directed. preparation of new surfaces all as specified and directed.

M&L for preparing new plastered surface of ceiling and applying three coats of white wash all as specified and directed. preparation of new surfaces all as specified and directed.

M & L 75mm thick P.C.C 1:3:6 type C-2 using 40mm graded stone aggregate as in plinth protection/sub base/path etc complete all as specified and directed.

S&F in repairs 15mm bore fancy type chromium plated bib cock long body with crutch or butterfly handle screwed down for iron pipes all as specified and directed.

S&F in repair Tubular towel rail 20 mm dia with brass chromium plated all as specified and directed.

S & F in repair health faucet with 1.00 mtr tube and hook complete all as specified and directed. Make-Prayag Cat no BEA -81 or equivalent of Essco/ Jaquar

M & L for Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed in repairs all as specified and directed. Make: Hardwyn/Everite/Godrej (All ISI Marked)

S&F in repair PVC water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinging device all as specified and directed. (Make : Jaquar or equivalent)

S & F in repairs 32 mm Waste coupling of brass chromium plated (half or full threaded)all as specified and directed. (Jaquar/ Hindware)

S & F in repairs 32mm bore PVC Waste pipe for wash hand basin complete all as specified and directed.

S&F sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm all as specified and directed. Make:Blue star/Diamond/prayag (All ISI)

S & F in repair tank cover for PVC tank(500/750/1000Ltrs) cover with 6 mm dia MS bar hinging device and 6mm dia MS bar locking arrangement of 'S; type for monkey protection etc complete all as specified and directed

S & F 15 mm CP Brass wall mixer for mixing hot & cold water screwed down for iron pipe etc complete all as specified and directed

S&F 300mm long brass sliding door bolt with sand or die cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts complete all as specified and directed.

S & F powder coated Anodized aluminum frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S & F powder coated Anodized aluminum window and ventilator shutters, fixed type without sash bar, aluminum section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodized aluminum snap beading, screws etc. complete all as specified complete all as specified

S & F 5.50mm thick ordinary quality sheet glass in squares exc 0.5 sqm in each pane fixed in aluminum frame complete all as specified and directed.

S & F 3mm thick figured glass n exc 0.5 sqm in each pane glazing with oil putty complete all as specified and directed.

S & F Powder coated aluminum grill of design DG-104 pattern made out of 10 mm dia rod fixed with and including stranded aluminum frame of F section of size 23.40 x 15.3 x 1.4 mm thick all as per manufacture instructions complete all as specified and directed

S&F in repair laminated PVC kitchen cabinets of depth 300mm with decorative finish on one face and other face white, made out of 18mm thick outer box and 18mm thick shelves of density not less than 550 kg/cum and shutters complete including knobs, hinges. Fixed to walls with steel screw and PVC sleeves by drilling holes all as specified and directed. (Note : Only front face is to be measured)

S&F in repair laminated PVC kitchen cabinets of depth 610mm with decorative finish on one face and other face white, made out of 18mm thick outer box and 18mm thick shelves of density not less than 500 kg/cum and shutters complete including knobs, hinges. Fixed to walls with steel screw and PVC sleeves by drilling holes.(Note : Only front face is to be measured)

M&L chequred cement concrete tiles 25cm X 25cm X 25mm thick, with grey cement and pigments, set, jointed and pointed bedding layer of mortar 15 mm thick in cement mortar 1:6 in neat cement slurry in floors complete all as specified and directed.

M&L PCC 1:3:6 (nominal mix) Type C-2 using 40mm size stone aggregate finished and smooth without using extra cements as in base complete all as specified and directed.

Flint India

M/S M N ENTERPRISE

SHANKAR ENTERPRISE

M/S Jiban Krishan Das and Co

M/S Sharma Construction