Providing work tables and construction of partition wall in room 213 at Chemistry department

Amount

Providing and fixing 12 mm thick marine plywood conforming to IS: 710, plain lining with necessary screws, priming coat on surface etc., complete.

Providing and fixing M.S. grills of required pattern in frames of windows etc fixed to steel windows by welding. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.

Providing and fixing IS marked stainless steel auto soft close hinges of specified size with stainless steel screws etc. complete

Providing and fixing aluminium handles 100 mm, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete

Providing and fixing aluminium hanging floor door stopper - single rubber type, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.

Steel work in built up GI tubular (TATA or equi.)(round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.

Applying priming coats with ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre and of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.

Painting with synthetic enamel paint one or more coats on old work of approved brand and manufacture of required colour to give an even shade

Providing and fixing white vitreous china laboratory sink of size 450x300x150 mmwith C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required :

Providing and fixing 25 mm nominal outer dia PVC pipes (3/4") (4kg/cm2) , including all PVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall

Providing and fixing 50 mm nominal outer dia PVC pipes (1-3/4") (4kg/cm2) , including all PVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall

Providing and fixing 63 mm nominal outer dia PVC pipes (2") (4kg/cm2) , including all PVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall

Supplying and fixing Stainless Steel three way swan neck type tap (Best Quality) for laboratory including cost and conveyance of all materials and labour charges etc complete

Providing and fixing C.P. brass angle valve 15mm nominal bore for basin mixer and geyser points of approved quality conforming to IS:8931

Providing and fixing powder coated aluminium (minimum thickness of powder coating 50 micron) work for fixed portion: doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :

Providing and fixing Aluminium Composite Panel(ACP) board in paneling fixed in aluminium doors, windows shutters and partitions frames with CP brass/stainless steel screws etc . complete as per architectural drawings and directions of engineer-in-charge

Providing and fixing with float glass panes of 5.50mm(weight not less than 12.50 kg/sqm) thick for glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-incharge. (Cost of aluminium snap beading shall be paid in basic item)

Providing and fixing 18mm or nearest thick mirror polished granite slab for Display board/table top moulding and polishing to edges, to give high gloss finish etc. complete (As per the design approved by the Engineer-in-charge, granite of any color and shade)

kp mohankumar

E BAIJU