Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.4 LAccepted-AOC | ₹7.4 L | L1 | Accepted-AOC L1 |
| 2 | L2₹7.8 LRejected-AOC | ₹7.8 L | L2 | Rejected-AOC L2 |
| 3 | L3₹7.9 LRejected-AOC | ₹7.9 L | L3 | Rejected-AOC L3 |
| Sl No | Description | Qty | Unit | SASIDHARAN CONTRCTOR L1 | SANIL KUMAR S L3 | RENJEE CHACKO L2 |
|---|---|---|---|---|---|---|
| 1.00Anganwadi building Maintenance | ||||||
| 1.00 | 50.6.1.5:Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete | 1.33 | cum | 6,333 ₹8,422.89 | 6,835 ₹9,090.55 | 6,755 ₹8,984.15 |
| 1.00 | 5.1.2:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size derived from natural sources) | 0.79 | cum | 9,125 ₹7,172.25 | 9,848 ₹7,740.53 | 9,733 ₹7,650.14 |
| 1.00 | 5.9.5:Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers | 0.71 | sqm | 663 ₹472.72 | 716 ₹510.51 | 707 ₹504.09 |
| 1.00 | 5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more | 19.26 | kilogram | 97 ₹1,868.22 | 105 ₹2,022.30 | 104 ₹2,003.04 |
| 1.00 | 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | 2,847.26 | kg | 169 ₹4.8 L | 182 ₹5.2 L | 180 ₹5.1 L |
| 1.01 | OD533309/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch
ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total
coatedthickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel
grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-
18 microns.Sheet should have protective guard film of 25 microns minimum to avoid
scratchesduring transportation and should be supplied in single length upto 12 metre or
as desiredby Engineer-in-charge. The sheet shall be fixed using self drilling/self
tapping screws ofsize (5.5x55mm) with EPDM seal, complete upto any pitch in
horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trusses
and including cutting tosize and shape wherever required. | 253.2 | sqm | 542 ₹1.4 L | 583 ₹1.5 L | 576 ₹1.5 L |
| 1.01 | OD533006/2025-2026:PVC DOOR | 4 | each | 3,031 ₹12,124 | 3,271 ₹13,084 | 3,233 ₹12,932 |
| 1.01 | 50.9.1.1:Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately), using good quality Anjili wood /jack wood | 0.18 | cum | 98,361 ₹17,508.26 | 1,06,162 ₹18,896.84 | 1,04,919 ₹18,675.58 |
| 1.01 | 50.9.3.1:Providing and fixing paneled or paneled and glazed shutters for doors, windows and clerestory windows, 30 mm thick shutters including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding paneling which will be paid for separately, all complete as per direction 0f Engineer in- charge. using Anjili/ Jack wood | 1.32 | sqm | 2,810 ₹3,709.20 | 3,033 ₹4,003.56 | 2,997 ₹3,956.04 |
Tender Value
₹8.5 L
EMD Value
₹21,176
Closing Date
21 May 2026, 6:00 pmClosed
ASSISTANT ENGINEER
Office of the Assistant Engineer LID EW Section Ummannoor Grama Panchayat
Pro no -72/25-26 Maintenance of various Anganwadi building -Ummannoor G.P
2026_LSGD_850700_1
72/25
Open Tender
Civil Works - Others
180 days
UMMANNOOR
Please refer Tender documents.
7 documents required · 7 mandatory
₹1,870
Yes
₹21,176
Yes
18 Jun 2026
14 May 2026
25 May 2026
14 May 2026
21 May 2026
14 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount | Item Code |
|---|---|---|---|---|---|---|
| 1Anganwadi building Maintenance | ||||||
| 1.001 | 50.6.1.5:Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete | - | cum | - | - | BI01010001010000000000000515BI0100001114 |
| 1.002 | 5.1.2:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size derived from natural sources) | - | cum | - | - | BI01010001010000000000000515BI0100001115 |
| 1.003 | 5.9.5:Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers | - | sqm | - | - | BI01010001010000000000000515BI0100001116 |
| 1.004 | 5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more | - | kilogram | - | - | BI01010001010000000000000515BI0100001117 |
| 1.005 | 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | - | kg | - | - | BI01010001010000000000000515BI0100001118 |
| 1.006 | OD533309/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch
ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total
coatedthickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel
grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-
18 microns.Sheet should have protective guard film of 25 microns minimum to avoid
scratchesduring transportation and should be supplied in single length upto 12 metre or
as desiredby Engineer-in-charge. The sheet shall be fixed using self drilling/self
tapping screws ofsize (5.5x55mm) with EPDM seal, complete upto any pitch in
horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trusses
and including cutting tosize and shape wherever required. | 1 | sqm | - | - | BI01010001010000000000000515BI0100001119 |
| 1.007 | OD533006/2025-2026:PVC DOOR | - | each | - | - | BI01010001010000000000000515BI0100001120 |
| 1.008 | 50.9.1.1:Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately), using good quality Anjili wood /jack wood | 1 | cum | - | - | BI01010001010000000000000515BI0100001121 |
| 1.009 | 50.9.3.1:Providing and fixing paneled or paneled and glazed shutters for doors, windows and clerestory windows, 30 mm thick shutters including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding paneling which will be paid for separately, all complete as per direction 0f Engineer in- charge. using Anjili/ Jack wood | - | sqm | - | - | BI01010001010000000000000515BI0100001122 |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1437438.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.28 MB
sbd4.pdf
Tender Documents • 0.92 MB
fot4.pdf
Tender Documents • 0.25 MB
pa4.pdf
Tender Documents • 0.25 MB
a4.pdf
Tender Documents • 0.24 MB
i4.pdf
Tender Documents • 0.23 MB
epay.pdf
Tender Documents • 0.23 MB
BOQ_1437438.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid