Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.4 LAccepted-AOC 37 B MODEL TOWN NEAR HARI MANDIR BAREILLY UP 243001 | BAREILLY | UTTAR PRADESH | 243001 | L1 | Accepted-AOC Being reasonable | |
| 2 | L2₹35.7 L+₹1.3 L (3.83%)Rejected-Finance 37 205 A 2 A 1 BUNDHU KATRA GWALIOR ROAD AGRA 282001 | AGRA | UTTAR PRADESH | 282001 | L2 | Rejected-Finance Not being L1 | |
| 3 | L3₹38.7 L+₹4.4 L (12.7%)Rejected-Finance H NO 786 ANAND VIHAR COLONY PILIBHIT BYPASS BAREILLY UP PIN 243005 | BAREILLY | UTTAR PRADESH | 243005 | L3 | Rejected-Finance Not being L1 |
Tender Value
₹45.7 L
EMD Value
₹91,400
Closing Date
26 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Maj Surya Shreedhar, GE (AF) Bareilly
Garrison Engineer (AF) Military Engineer Services, Bareilly 243002 (UP)
8750 PROVN OF CERTAIN WORK SERVICES FOR OPS REQUIREMENT, PROVN OF CONNECTING PATH AT ALFA SQN TECH COMPLEX AND SPECIAL REPAIRS TO CERTAIN SWTs AT AF STATION, BAREILLY
2023_MES_611391_1
8750/E8
Open Tender
Civil Works
Item Rate
180 days
Bareilly
Class D
Category a(i)
8 documents required · 8 mandatory
₹500
Garrison Engineer (AF) Bareilly
₹91,400
Yes
14 Sept 2023
31 Jul 2023
28 Aug 2023
31 Jul 2023
26 Aug 2023
14 Aug 2023
Amount
Surface excavation n.exc. 30cm deep and averaging 15cm deep and getting out in soft/ loose soil all as specified.
M&L for hardcore with broken stone or boulders of gauge n. exc. 63mm, deposited, spread and leveled in layers n. exc. 15cm thick, watered and rammed to a true surface.
M&L for 100mm thick cement concrete PCC 1:4:8 type D2 using 40mm graded aggregate as in sub base for flooring/ hard standing all as specified.
Removing excavated materials to a distance not exc. 50m and depositing where directed at a level n.exc 1.50m above the starting point.
M&L for PCC 100mm thick type B1 (1:2:4) using 20mm graded aggregate as in hard standing/ flooring complete finishing even and smooth without using extra cement all as specified.
M&L for Forming Construction joint 30mm deep x 10mm wide filled with sealing compound Grade 'B' all as specified.
M&L for brick work with sub class 'B' bricks, old size, straight or curved on plan exc. 6m mean radius using old size bricks built in cement mortar (1:6) all as specified.
M&L for rendering 15mm thick in CM (1:4) on brick or concrete surfaces, finishing even and smooth without using extra cement complete all as specified.
M&L for preparation of new plastered surfaces of walls and applying two coats of colour wash all as specified and as directed.
M&L for providing cement concrete type B1, 1:2:4 using 20mm graded aggregate as in lintels up to 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, copings, bed plates etc complete including necessary formwork all as specified.
M&L for pre-polished coloured chequered cement concrete tiles (rubber moulded with glossy finish) of size 300x300mm, 25mm thick, set, jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles laid over and including 20mm thick screed bed in CM 1:6 complete all as specified.
Excavating over areas, n exc. 1.5 m deep and getting out in soft/ loose soil
Excavating manually in trenches n. exc. 1.5m wide and n. exc. 1.5m in depth for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. n. exc. 10sq.m. on plan and n. exc. 1.5m in depth and getting out in soft/ loose soil.
M&L for plain cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete, sub base for flooring etc. all as specified and as directed.
Returning, filling in including spreading leveling watering and well ramming in layers not exc. 25cm in any type of soil.
M&L for 2.0mm thick Mild steel, plain, black sheet in hearths; covering to door shutters; covering to door chowkats (frames); chullah hoods; water tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required and as specified.
M&L for mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe 410-W (Gde-E- 250), Quality-A all as specified.
M&L for preparation of old painted steel/ iron surfaces of any description exceeding 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome primer complete all as specified and as directed.
Dewatering existing static water tank of depth/ capacity at different locations, cleaning the tank including clearing all accumulated mud/ vegetation growth etc complete including requisite T&P, manpower etc complete all as directed.
Taking down cement plaster on brick or stone walls including raking out joints, hacking for key, scrubbing down with water etc. to receive plaster
Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc. 15cm thickness (below or above ground level) all as specified and as directed.
M&L for 50mm thick cement concrete PCC 1:2:4 type B0 using 12.5mm graded aggregate as in flooring of static water tank including mixing liquid water proofing compound finished even and smooth using extra cement complete all as specified and as directed. (Note: Supply only liquid water proofing compound shall be measured and paid separately)
M&L for providing cement concrete type B0, 1:2:4 using 12.5mm graded aggregate as in lintels up to 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, copings, bed plates etc complete including necessary formwork all as specified.
Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles all as directed.
M&L for Brickwork with subclass ‘B’ brick tiles in brick-on-edge wall (less than ½ brick thick), using old size brick tiles built in cement mortar (1:4) all as specified.
M&L for rendering 15mm thick in CM (1:4) on brick or concrete surfaces finishing even and smooth without using extra cement complete including mixing water proofing compound all as specified. [Note: Supply only water proofing compound shall be measured and paid separately]
Supply only liquid water proofing compound.
Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified.
S&F in repairs 20mm bore gun metal globe or gate valve with iron wheel heads Class-II, screwed both ends for iron pipe all as specified.
M&L for preparation of new plastered surfaces of walls and applying two coats of weather proof exterior emulsion paint over a coat of exterior primer complete all as specified.
M&L for preparation of newly plastered surfaces of walls and applying two coats of synthetic enamel paint over a coat of priming paint complete all as specified and as directed.
Demolition of cement concrete (un reinforced) of any description and in any position not otherwise specifically provided for all as specified and as directed.
M&L for Chemical Earthing with copper earth plate electrode 900 x 600 x 5 mm thick buried directly in ground, earth pit not less than 5.10 metres below normal ground level and complete size of pit shall be 1.60 m x 1.60 m x 5.10 metres, with top edge of the plate not less than 3.75 metres below normal ground level, earth plate surrounded from all sides by 20 cm thick salt and charcoal dust and Magnesium sulphate filling in alternate layers of 20 cm thick up to 1.8 metres height and including connected to copper strip 32 x 6 mm (up to 7.5 Metres) by means of brazing / coppers nut-bolts, earth strip protected with 65mm bore light grade GI pipe from electrode and up to the earth test point, 15 mm bore light grade GI watering pipe, GI funnel, wire mesh, earth plate surrounded from all sides by 20 cm thick salt (40 Kg), charcoal dust (40 Kg) and Magnesium sulphate (50 Kg) filling in each alternate layers up to 1.80 m height including excavation, removal surplus soil to a distance not exc. 50 m, PCC pit in PCC (1:3:6) type C-1, using 20 mm graded stone aggregate, RCC cover 40 mm thick in RCC (1:2:4) type B-1, using 20 mm graded stone aggregate reinforced with 8 mm dia mild steel deformed bars @ 75 mm centre to centre both ways complete all as specified and directed. NOTE:- Additional Chemical compound if required on account to achieve earth resistance less than 1.00 ohm shall deemed to be included in the unit rate of this item. On testing after completion of job, if desired earth resistance (i.e. less than one ohm) is not obtained, the earthing shall be redone by the contractor without any extra cost to Govt.
Supply, lay, connect, test and commissioning of LT XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured electric power cables (heavy duty) with aluminium conductor 1100 volts grade of size 3½ Core 35 Sq.mm complete all as specified and directed. Note: (i) Contractor shall bring the entire cable in one length. (ii) Necessary test results like continuity test, megger tests shall be submitted to Engineer-in-Charge before the cable is laid. (iii) Excavation & earth work will be measured and paid separately.
All as per Item No. 34 herein before but cable of size 4 core 16 Sq.mm
S&F in repairs earth continuity conductor or main Galvanized Iron strip of size 25x4mm buried in ground/ fixed to wall or any other indicated situation for loop earthing and the like up to test point fixed on necessary insulators and fastening screws, rawl plugs complete all as specified and directed. Note: The joints of each lead strip shall be welded/ brazed and the cost of brazing/ welding shall deem to be included in unit rate of this item.
S&F Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex head screws for holding the bronze plate including fastening/ bolting the roof down conductor and earth electrode over the bronze plate with copper bolts & nuts of suitable size, providing 10mm thick fibre sheet of size 15x15cm below the test point to avoid direct contact with wall including enclosing the test point with 1.6mm thick MS sheet front openable box duly painted complete all as directed by Engineer -in-Charge.
Horizontal Boring under hard standing/ pavements or roads manually using suitable auger for insertion of GI pipes up to 50mm bore and making good the disturbed surface complete all as specified and as directed. [Note: GI pipe will be measured and paid separately]
Supply and laying GI pipe of 50mm bore dia light grade for cable protection, laid in trenches/ drawing through boring for drawing cables complete all as specified and as directed.
Supply & erecting in true vertical position, steel tubular swaged pole 410-SP-31, 9.0 meter long complete with mild steel base plate, pole cap, finial taper plug, bolts, nuts, washers etc. including painting the exposed outer surfaces with two coats of aluminium paint over a coat of red oxide primer including 3 Nos of bands/straps painted with signal red and white colour (300mm each) in alternate layers from plinth block, marking of pole number with black synthetic enamel paint 2.5 cm height including applying one coat of black bituminous paint on portion embedded in concrete foundation complete all as specified and directed. [Note: Earth work and excavation, PCC foundation & coping shall be measured and paid separately]
S&F 1100 volts grade three single core 1.50 Sq.mm size each, flexible multi-stranded copper conductor cable, PVC insulated and overall PVC sheathed round flexible connection wire as in electric connections complete all as specified and directed.
S&F energy saving & environmental friendly LED street light fitting 120W with pressure die-cast aluminium housing [IP 66] with high power LED as light source, with acrylic cover and accessories fixed with and including brackets made of GI Pipe light grade 40 mm bore, 1.50 mtrs long including fixing clamps, bolts & nuts etc. complete all as specified and as directed. [Cat No. ENDURAOMNIPLUS SL120WLED757 SASY TOPC of make: Havells/ Cat No. LR07-132-XXX-57-XX of make: Wipro/ Cat No. BRP409 LED130 CW SLA FG PSU GR V2 of make: Philips]
S&F shock proof, rust proof, fire retardant non transparent SMC Kiosk pole box of internal size not less than 300x200x105mm with hinged door, for out door duty with and including four Nos. insulated aluminium bus bar of 60 Amp rating, mounted on unbreakable insulators, 10 Amp MCB SP with aluminium lugs of suitable size up to 50 sq.mm cable including 02 Nos. 40x3mm flat iron clamps duly painted with two coats of synthetic enamel paint over a coat of red oxide primer including suitable size nut-bolts, washers etc. all as specified and as directed.
S&F socket outlet flush type 6/16 Amp, 2 in 1, 6 pin, 230 V AC
Supply and spread river sand as in cushioning for UG cable all as specified in clause 19.75 of SSR Part I. [Note: Punned down thickness shall be considered for payment]
M&L for well burnt Sub class 'B', modular bricks laid dry, flat, over the cable abutting each other, complete all as specified and directed.
Supply, installation, testing and commissioning of outdoor type LT Feeder Pillar of overall size not less than 1200mm width x 1000mm height (with canopy & base channel) x 450mm depth, M.S. channel base frame mounted conforming to IS/IEC-61439-1&2 with rated fault 65kA/1 Sec with internal arc containment, suitable for 3 phase 4 wire, 415 Volts AC supply and having 4 Nos Aluminium bus bars of rating 200 Amps, duly powder coated with seven (07) tanks pre-treatment process followed by powder coated painting (thickness not less than 80 micron) with RAL 7032 (Siemens Gray) shade. The Feeder Pillar shall be dust and vermin proof with degree of protection not less than IP-54 and Internal wiring with PVC insulated copper conductor multi-stranded cable 1100 volts grade IS-694 marked. The feeder pillar shall be made out of 3.00mm thick CRCA mild steel sheet and 3.00mm thick gland plate with compartmentalized construction for individual switchgears and Bus Bars and having front opening facility (with double layer shutter) and rear opening facility with single layer shutter with locking facility. The feeder pillar shall be comprising of the following:
INCOMING: (i) MCCB 100 Amp, 4 pole, 25 KA, 415 Volts - 01 No (ii) Voltmeter 0-500 Volts, Square flush type, digital - 01 No. (iii) Amp meter 0-600 Amps, Square flush type, digital - 01 No. (iv) Indication lamp LED type - RYB-01 set (v) Alarm system for indication of commercial power failure OUTGOING: (i) MCCB 63 Amp, 4 pole, 36 KA, 415 Volts - 02 No
Deduct: Amount of Schedule of Credit b/f from Sl. Page No. 16 of tender document i.e. Rs. 71,100.00
Jain construction co
ZAIGHAM ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .