Demolition & Re-construction of residential Quarters at 132 kV Salakati Substation under O&M ADD CAP 2019-24 [Package-E]

:: COVER PAGE ::

Name of Package Demolition & Re-construction of residential Quarters at 132 kV Salakati Substation under O&M ADD CAP 2019-24 [Package-E]

NIT Ref. No.: NESH/CSM/OT/PRANIT/1500-1310 [PKG E] Dated:14/06/2024

Package Code NESH/CSM/OT/PRANIT/1500-1310 [PKG E] /BPS-Vol-IC

Specification No. NESH/CSM/OT/PRANIT/1500-1310 [PKG E]/BPS-Vol-IC

Address of Purchaser/ Owner Senior General Manager (C&M)

Power Grid Corporation of India Limited.

Dongtieh, Lower Nongrah, Lapalang.

Shillong - 793006.

Phone/Fax -0364- 2536406; Mobile:7002775114.

email: [email protected] | [email protected]

General guidelines for filling up the Attachments

: Attachments : Demolition & Re-construction of residential Quarters at 132 kV Salakati Substation under O&M ADD CAP 2019-24 [Package-E] Demolition & Re-construction of residential Quarters at 132 kV Salakati Substation under O&M ADD CAP 2019-24 [Package-E]

Specification No.:NESH/CSM/OT/PRANIT/1500-1310 [PKG E]/BPS-Vol-IC

1 Fill up only green shaded cells in the relevent attachments.

Note : Enable the Active X Control & Macros. Also ensure to keep option of "Trust acess to VBA project object Model" cheched [√]. Ensure that you work on MS Excel 2007 or higher version.

पावर ग्रिड कारपोरेशन ऑफ इण्डिया लिमिटेड

(भारत सरकार का उद्यम)

Power Grid Corporation of India Limited

(A Government of India Enterprises)

General Instruction to the Bidders for filling up this workbook for :

Demolition & Re-construction of residential Quarters at 132 kV Salakati Substation under O&M ADD CAP 2019-24 [Package-E]

I While filling up the worksheets following may please be observed :

(i) Fill up only green shaded cells.

(ii) Certain data type entries have been restricted, such as Numeric values or limits of numeric values.

(iii) Select only the options provided in pull down menus.

(iv) Do not link any cell of this work book with any other work book.

(v) Do not use copy & paste or cut & paste options for filling up the data.

(vi) Do not reformat any of the cell of the work book.

Happy Bidding !

Demolition & Re-construction of residential Quarters at 132 kV Salakati Substation under O&M ADD CAP 2019-24 [Package-E]

NESH/CSM/OT/PRANIT/1500-1310 [PKG E] Dated:14/06/2024 Sole Bidder 1

JV (Joint Venture) 2 or More

Enter following details of the bidder

Specify type of Bidder [Select from drop down menu] Sole Bidder 1 Sole Bidder 1 2 0

1 JV (Joint Venture) 2 or More

Micro and Small Enterprise (MSE)

Name of Sole Bidder Name

Address of Sole Bidder Principal place of business Add1

Name of other Partner 1

Address of other Partner

Name of other Partner - 2 (more, if any)

Name of other Partner - 2

Address of other Partner - 2

Name of other Partner - 2 (more, if any)

Address of other Partner - 2 (more, if any)

MSE Bidder ? TRUE

Enter the name of Registration Authority. Udyam Registered Bidder

Whether Medium/Small/Micro Micro

Udyam Registeration No.:

Type of Enterprise

Social Category of Enterpreneur

Printed Name Printed Name

Designation Desig

Date : 11 Jun 2024 30

Specification No.:NESH/CSM/OT/PRANIT/1500-1310 [PKG E]/BPS-Vol-IC Bid Form 2nd Envelope Sole Bidder 1 st 1 January

0 2 nd 2 February

BID FORM (Second Envelope) 3 rd 3 March

Bid Proposal Ref. No. 5 th 5 May

Date : 11/Jun/2024 6 th 11 6 June

To: 8 th June 8 August

Sr. General Manager (C&M) 9 th 2024 9 September

Power Grid Corporation of India Limited 10 th 10 October

North Eastern Region 11 th 11 November

Dongtieh, Lower Nongrah, Lapalang 12 th 12 December

Shillong – 793 006 (Meghalaya). 13 th

Name of Contract : Demolition & Re-construction of residential Quarters at 132 kV Salakati Substation under O&M ADD CAP 2019-24 [Package-E] 15 th

Dear Ladies and/or Gentlemen, 16 th

1.0 In continuation of Techno-commercial Bid,we hereby submit the Second Envelope of the Bid,both of which shall be read together and in conjunction with each other,and shall be construed as an integral part of our Bid. Accordingly,we the undersigned,submit our offer for Demolition & Re-construction of residential Quarters at 132 kV Salakati Substation under O&M ADD CAP 2019-24 [Package-E] under the above-named package in full conformity with the said Bidding Documents for the sum of (Specify the currency and the amount in figures and words) …………. or such other sums as may be determined in accordance with the terms and conditions of the Bidding Documents. In continuation of First Envelope of our Bid, we hereby submit the Second Envelope of the Bid, both of which shall be read together and in conjunction with each other, and shall be construed as an integral part of our Bid. Accordingly, we the undersigned, offer to design, manufacture, test, deliver, install and commission (including carrying out Trial Operation, Performance & Guarantee Test as per provision of Technical Specification) under the above-named package in full conformity with the said Bidding Documents for the sum of Rs. or such other sums as may be determined in accordance with the terms and conditions of the Bidding Documents. #REF! #REF! 17 th

SCHEDULE-1 Bill of Quantities for [Scheduled Items/DSR Items] PART 1 RESIDENTIAL DISMANTLE [Scheduled Items/DSR Items]

PART 2 RESIDENTIAL CIVIL RECONSTRUCTION [Scheduled Items/DSR Items] 26 th

PART 3 RESIDENTIAL ELECTRICAL RECONSTRUCT [Scheduled Items/DSR Items]

SCHEDULE-2 Bill of Quantities for [Non-Scheduled Items/Non DSR Items] PART 1 RESIDENTIAL CIVIL RECONSTRUCTION [Non-Scheduled Items/Non DSR Items] 26 th

PART 2 RESIDENTIAL ELECTRICAL RECONSTRUCT[Non-Scheduled Items/Non DSR Items] 26 th

SUMMARY SCHEDULE Grand Summary 26 th

2.5 We declare that items left blank in the Schedules will be deemed to have been included in other items. The TOTAL for each Schedule and the TOTAL of Grand Summary shall be deemed to be the total price for executing the Facilities and sections thereof in complete accordance with the Contract, whether or not each individual item has been priced. 31 st

3.0 We confirm that except as otherwise specifically provided our Bid Prices in this Second Envelope include all taxes, duties, levies and charges as may be assessed on us/our Associate (applicable for Foreign Bidder), our Sub-Contractor/Sub-Vendor or their employees by all municipal, state or national government authorities in connection with the Facilities, in and outside of India.

3.1 100% of applicable Taxes and Duties i.e GST, which are payable by the Employer under the Contract, shall be reimbursed by the Employer on production of satisfactory documentary evidence by the Contractor in accordance with the provisions of the Bidding Documents.

3.2 We confirm that we have also registered/we shall also get registered in the GST Network with a GSTIN, in all the states where the project is located and the states from which we shall make our supply of goods.

4.0 # (For Joint Venture only) We, the partners of Joint Venture submitting this bid, do agree and confirm that in case of Award of Contract on the Joint Venture, we shall be jointly and severally liable and responsible for the execution of the Contract in accordance with Contract terms and conditions. #REF!

5.0 We, hereby, declare that only the persons or firms interested in this proposal as principals are named here and that no other persons or firms other than those mentioned herein have any interest in this proposal or in the Contract to be entered into, if the award is made on us, that this proposal is made without any connection with any other person, firm or party likewise submitting a proposal is in all respects for and in good faith, without collusion or fraud.

Dated this 11th day of June 2024

Thanking you, we remain,

Yours faithfully,

For and on behalf of Name

Date : 11/Jun/2024 Printed Name :

Place : Place Designation :

Please provide additional information of the Bidder

Business Address :

Country of Incorporation :

State/Province to be indicated :

Name of Principal Officer :

Address of Principal Officer :

Note: Bidders may note that no prescribed proforma has been enclosed for Attachment 2 : Power of Attorney. Bidders may use their own proforma for furnishing the required information with the bid.

Specification No.:NESH/CSM/OT/PRANIT/1500-1310 [PKG E]/BPS-Vol-IC Schedule - 1 of BPS, Vol-IC

Name of Package:Demolition & Re-construction of residential Quarters at 132 kV Salakati Substation under O&M ADD CAP 2019-24 [Package-E]

(Bill of Quantities for DSR Items)

Bidder’s Name and Address

Name : XXYYZZ C&M Deptt.

Address : aaAAbbBB Power Grid Corporation of India Ltd.,

xxXXyyYY NERTS, Lower Nongrah, Lapalang

Shillong - 793006

We declare that following are our Total Bid Prices in Rupees for the expenditure incurred for the entire scope of work as specified in the specifications and documents. We have indicated the Percentage and Amount to the Total Estimated Cost as indicated in the “Bill of Quantity (BOQ) & Prices” covering the entire scope of works enclosed herewith as Schedule-1. Incase of discrepancy, the quoted percentage as per this Schedule shall prevail.

Demolition & Re-construction of residential Quarters at 132 kV Salakati Substation under O&M ADD CAP 2019-24 [Package-E]

Sl. DSR2021 Ref Description Unit Total Qnty CE Unit Rate Quoted Percentage ABOVE THE ESTIMATED COST OR BELOW THE ESTIMATED COST Quoted Unit Rate Quoted Amount in Rs. HSN/SAC CODES Whether SAC in column ‘(J)' is confirmed. If not indicate applicable the SAC # Rate of GST applicable (in %) Whether rate of GST in column ‘(L)’ is confirmed. If not indicate applicable rate of GST #

"PART 1 RESIDENTIAL DISMANTLE"

1 14.82 14.82 Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge. Each 8 129.48 129.48 1,035.84 995431 18%

2 15.52 15.52 Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. Each 8 870.91 870.91 6,967.28 995419 18%

3 15.2.1 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. 15.2.1 Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) Cum 23.714 2347.59 2347.59 55,670.75 995429 18%

4 15.3 15.3 Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge Cum 104.4 3424.84 3424.84 357,553.30 995429 18%

5 15.7.4 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. 15.7.4 In cement mortar Cum 59.271 1986.58 1986.58 117,746.58 995429 18%

6 15.12.1 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : 15.12.1 Of area 3 sq. metres and below Each 64 354.05 354.05 22,659.20 995419 18%

7 15.14.1 15.14.1 Of sectional area 40 square centimetres and above Cum 5.071 4297.85 4297.85 21,794.40 995419 18%

8 15.28.1 Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: 15.28.1 G.S. Sheet Sqm 431.4 159.07 159.07 68,622.80 995419 18%

9 15.44.1 Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : 15.44.1 15 mm to 40 mm nominal bore Mtr 64 145.15 145.15 9,289.60 995419 18%

10 15.45.1 Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per direction of Engineer-in-charge: 15.45.1 Up to 150 mm diameter Mtr 64 398.5 398.5 25,504.00 995419 18%

Item no. (as per DSR-21 "PART 2 RESIDENTIAL CIVIL RECONSTRUCTION"

1 2.6.1 Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge. All kinds of soil. cum 1,976.31 240.31 240.31 474,927.06 995433 18%

2 2.8.1 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 2.8.1 All kinds of soil. cum 300 335.52 335.52 100,656.00 995433 18%

3 2.10.1.1 Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of urplus excavated soil as directed, within a lead of 50 m : 2.10.1 All kinds of soil. 2.10.1.1 Pipes, cables etc, not exceeding 80 mm dia. Metre 150.00 298.90 298.9 44,835.00 995433 18%

4 2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. cum 1074.85 297.03 297.03 319,264.07 995433 18%

5 2.25A Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. cum 30.00 431.19 431.19 12,935.70 995443 18%

6 2.26.1 Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials. All kinds of soil. cum 752.12 122.22 122.22 91,924.11 995433 18%

7 2.27 Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. cum 65.97 2527.83 2527.83 166,769.35 995433 18%

8 2.28 Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. 2.28.1 All kinds of soil sqm 900.00 32.92 32.92 29,628.00 995434 18%

9 Concrete Work 0.00 0.00 0 0.00

10 2.35.1.1 Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment : Along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall & rodding etc. complete: With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration Metre 119.10 37.78 37.78 4,499.60 995433 18%

11 4.1.3 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth leve 4.1.3 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) Cum 26.56735 8614.60 8614.6 228,867.09 995454 18%

12 4.1.8 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) cum 65.67 7399.22 7399.22 485,918.98 995454 18%

13 4.11 Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 20mm nominal size). sqm 28.08 528.96 528.96 14,853.20 995454 18%

14 4.12 Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification. per 50kg of cement 135.00 66.85 66.85 9,024.75 995454 18%

15 4.13 Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil. sqm 31.08 133.16 133.16 4,138.61 995454 18%

16 4.17 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. sqm 124.90 797.29 797.29 99,581.52 995454 18%

17 5.9.1 Centering and shuttering including strutting, propping etc. and removal of form for :Foundations, footings, bases of columns, etc. for mass concrete sqm 417.55 360.20 360.2 150,401.51 995457 18%

18 5.9.3 Centering and shuttering including strutting, propping etc. and removal of form for :Suspended floors, roofs, landings, balconies and access platform sqm 862.48 896.59 896.59 773,286.46 995457 18%

19 5.9.5 Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers sqm 1209.68 711.55 711.55 860,747.80 995457 18%

20 5.9.6 Centering and shuttering including strutting, propping etc. and removal of form for : Columns, Pillars, Piers, Abutments, Posts and Struts sqm 529.29 940.68 940.68 497,890.64 995457 18%

21 5.9.7 Centering and shuttering including strutting, propping etc. and removal of form for : Stairs, (excluding landings) except spiral-staircases sqm 62.20 769.34 769.34 47,849.10 995457 18%

22 5.9.19 Centering and shuttering including strutting, propping etc. and removal of form for : Weather shade, Chajjas, corbels etc., including edges. sqm 74.04 953.20 953.2 70,574.93 995457 18%

23 5.22.6 STEEL REINFORCEMENT Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. kg 21516.04 104.85 104.85 2,255,956.79 995454 18%

24 5.22A.6 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. kg 23584.89 104.85 104.85 2,472,875.72 995454 18%

25 5.3 5.30 Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections. Mtr 239.20 75.68 75.68 18,102.66 995478 18%

26 5.3 5.3 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). cum 30.00 12537.75 12537.75 376,132.50 995454 18%

27 5.33.1 DESIGN MIX CONCRETE Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work, using coarse aggregate and fine aggregates derived from natural sources, Potrland Puzzzolana/ Ordinary Portland/ Portland slag, admixutues in recommneded proportions as per IS: 9103 to accelerate/ retard setting of concrete to improve workability without impairing strength and including pumping of concrete to site of laying, curing, carriage for all leads but excluding cost of centering, shuttering, finishing & reinforcement as per direction of Engineer-in-charge. Concrete of M25 grade All works upto plinth level cum 215.16 9353.99 9353.99 2,012,607.88 995454 18%

28 5.33.2 DESIGN MIX CONCRETE Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work, using coarse aggregate and fine aggregates derived from natural sources, Potrland Puzzzolana/ Ordinary Portland/ Portland slag, admixutues in recommneded proportions as per IS: 9103 to accelerate/ retard setting of concrete to improve workability without impairing strength and including pumping of concrete to site of laying, curing, carriage for all leads but excluding cost of centering, shuttering, finishing & reinforcement as per direction of Engineer-in-charge. Concrete of M25 grade All works above plinth level upto floor V level cum 210.64 11790.17 11790.17 2,483,422.46 995454 18%

29 6.1.2 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) cum 30.73 7787.78 7787.78 239,301.07 995456 18%

30 6.4.1 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand) sqm 184.66 9956.12 9956.12 1,838,497.12 995456 18%

31 6.13.2 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand) sqm 423.80 1190.75 1190.75 504,641.76 995456 18%

32 6.15 6.15 Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry. sqm 423.80 101.12 101.12 42,854.82 995456 18%

33 7.32.1 Stone work, plain in copings, cornices, string courses and plinth courses, upto 75 mm thick in Cement mortar 1:6 (1 cement : 6 coarse sand), including pointing with white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade. 7.32.1 Red sand stone cum 3.78 84319.96 84319.96 318,350.64 995474 18%

34 8.2.2.2 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shadeArea of slab over 0.50 sqm sqm 21.91 5176.09 5176.09 113,408.13 995474 18%

35 8.3.2 Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. 8.3.2 Granite work Metre 125.54 489.90 489.9 61,502.05 995474 18%

36 8.4 Extra for fixing marble /granite stone over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive including cleaning etc.complete. 100sqm 20.00 556.23 556.23 11,124.60 995474 18%

37 8.9.1.2 Stone tile (polished) work for wall lining over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in white cement complete. 8.9.1 8mm thick 8.9.1.2 Granite of any colour and shade sqm 50.48 3632.33 3632.33 183,341.86 995474 18%

38 8.31 8.31 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. sqm 267.79 1243.86 1243.86 333,093.27 995411 18%

39 9.7.7.2 Float glass panes 9.7.7.2 5.0 mm thick glass panes (weight not less than 12.50 kg/sqm). sqm 218.57 2609.70 2609.7 570,402.13 -995476 18%

40 9.12 9.12 Extra for providing frosted glass panes 4 mm thick (weight not less than 10 kg per sqm) instead of ordinary float glass panes 4 mm thick (weight not less than 10 kg per sqm) in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured) sqm 12.45 173.69 173.69 2,162.44 995476 18%

41 9.45 Providing and fixing teak wood lipping of size 25x3 mm in pelmet. Metre 105.00 71.93 71.93 7,552.65 995476 18%

42 9.47.1 Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets : (Hanger rods) 20 mm dia (heavy type) -1 metre long Metre 56.00 178.54 178.54 9,998.24 995476 18%

43 9.48.2 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. 9.48.2 Fixed to openings /wooden frames with rawl plugs screws etc. kg 1257.70 231.24 231.24 290,829.39 995476 18%

44 9.55 Providing and fixing ISI marked IS : 1341 M.S. pressed butt hinges bright finished with necessary screws etc. complete : 0.00 0 0.00 18%

47 9.61.1 Providing M.S. Piano hinges ISI marked IS : 3818 finished with nickel plating and fixing with necessary screws etc., complete. Overall width 35 mm Metre 118.00 330.95 330.95 39,052.10 995476 18%

48 9.88 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. each 30.00 956.18 956.18 28,685.40 995476 18%

49 9.90.2 Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete. Size 50 mm each 28.00 334.88 334.88 9,376.64 995476 18%

50 9.92.2 Providing and fixing chromium plated brass handles with necessary screws etc. complete: 100 mm (4 Nos. handles per cupboard) each 59.00 233.00 233 13,747.00 995476 18%

51 9.96.1 Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 300x16 mm each 63.00 304.46 304.46 19,180.98 995476 18%

52 9.97.2 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 250x10 mm each 78.00 122.11 122.11 9,524.58 995476 18%

53 9.97.4 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :150x10 mm (Wire mesh door) each 94.00 88.37 88.37 8,306.78 995476 18%

54 9.97.5 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 100x10 mm (cupboard) each 64.00 68.60 68.6 4,390.40 995476 18%

55 9.100.1 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm each 69.00 70.24 70.24 4,846.56 995476 18%

56 9.101.2 Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868)transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper each 60.00 72.81 72.81 4,368.60 995476 18%

57 9.114.2 Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. Double strip (horizontal type) (12 Nos. magnetic catcher per cupboard) each 160.00 39.94 39.94 6,390.40 995476 18%

58 9.127.2 Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 9.127.2 1.0 mm thick sqm 100.00 893.60 893.6 89,360.00 995476 18%

59 9.135.2 Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete. 9.135.2 With 12 mm mild steel U beading sqm 92.66 1230.17 1230.17 113,987.55 995476 18%

60 9.147B.1 Providing and fixing factory made uPVC white colour fixed glazed windows/ ventilators comprising of uPVC multi-chambered frame and mullion(where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), , uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc.After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable 9.147B.1 Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area upto 0.75 sqm.) sqm 12.45 8479.80 8479.8 105,573.51 995478 18%

61 9.147D.4 Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm). sqm 125.40 11278.39 11278.39 1,414,310.11 995478 18%

62 9.147F.4 Providing and fixing factory made uPVC white colour sliding glazed door comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), ppropriate dimension uPVC extruded glazing beads, uPVC extruded interlock and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) cresent lock (if required), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. 9.147F.4 Three track three panels sliding door with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 5.00 sqm) sqm 67.92 10254.08 10254.08 696,457.11 995478 18%

63 10.17 10.17 Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar bent to shape with hooked ends in R.C.C. slabs, beams during laying including painting the exposed portion of loop, all as per standard design complete. each 30.00 217.50 217.5 6,525.00 995476 18%

64 10.25.2 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works kg 5097.94 166.44 166.44 848,500.67 995476 18%

65 11.2 11.2 Dry brick on edge flooring in required pattern with bricks of class designation 7.5 on a bed of 12 mm mud mortar, including filling joints with local sand, with common burnt clay non modular bricks. sqm 339.66 857.70 857.7 291,326.38 995474 18%

66 11.3 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement lurry, but excluding the cost of nosing of steps etc. complete. 11.3.1 40 mm thick with 20 mm nominal size stone aggregate sqm 339.66 637.46 637.46 216,519.66 995474 18%

67 11.2 Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). 18%

11.20.3 Dark shade pigment using ordinary cement sqm 150.00 1150.87 1150.87 172,630.50 995474 18%

69 11.41A.2.2 VITRIFIED FLOOR TILE Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily 11.41A.2 Glazed vitrified floor tiles polished finish of size 11.41A.2.2 Size of Tile 600 x 1200 mm sqm 477.5248 1886.35 1886.35 900,778.91 995474 18%

70 11.41A.3.1 11.41A.3 Glazed Vitrified tiles Matt/Antiskid finish of size 11.41A.3.1 Size of Tile 600 x 600 mm sqm 52.78 1533.46 1533.46 80,936.02 995474 18%

71 11.47 Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately) 0.00 0.00 0 0.00 995474 18%

73 11.56.1 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. 11.56.1 Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent sqm 60.225 4571.90 4571.9 275,342.68 995474 18%

74 12.21.1 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design In 75x75 mm deep chase Metre 29.35 304.34 304.34 8,933.69 995453 18%

75 12.22 Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. each 6.00 311.83 311.83 1,870.98 995453 18%

76 12.41.2 Providing and fixing on wall face Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes 12.41.2 110 mm diameter metre 92.00 373.99 373.99 34,407.08 995416 18%

77 12.42.1.2 Providing and fixing on wall face Unplasticised - PVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Coupler 110 mm each 10.00 140.30 140.3 1,403.00 995453 18%

82 12.43.2 Providing and fixing Unplasticised -PVC pipe clips of approved design to Unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm each 40.00 362.01 362.01 14,480.40 995453 18%

83 12.44 12.44 Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. each 12.00 56.03 56.03 672.36 995453 18%

84 12.50 12.50 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. sqm 240.00 785.48 785.48 188,515.20 995453 18%

85 12.55 12.55 Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner. sqm 795.80 1690.02 1690.02 1,344,913.27 995453 18%

86 13.1.1 12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) sqm 1085.74 344.87 344.87 374,438.24 995472 18%

87 13.2.1 15 mm cement plaster on rough side of single or half brick wall of mix:1:4 (1 cement: 4 coarse sand) sqm 1085.74 397.32 397.32 431,385.16 995472 18%

88 13.11 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 finished with a top layer 6mm thick cement plaster 1:6. sqm 950.00 517.86 517.86 491,967.00 995472 18%

91 13.26 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. sqm 893.65 250.66 250.66 224,001.06 995472 18%

92 13.41 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : 13.41.1 New work (two or more coats) over and including water thinnable priming coat with cement primer sqm 438.20 190.12 190.12 83,310.58 995473 18%

93 13.47.1 EXTERIOR FINISHING Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) sqm 1,224.77 189.90 189.9 232,584.39 995473 18%

94 13.61 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : 13.61.1 Two or more coats on new work sqm 160.00 153.75 153.75 24,600.00 995473 18%

95 13.65 Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade : 13.65.1 Two or more coats on new work sqm 100.00 134.63 134.63 13,463.00 995473 18%

96 13.73.2 Forming groove of uniform size in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer, including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge. 20 mm wide and 15 mm deep groove Mtr 2257.77 73.81 73.81 166,646.00 995472 18%

97 13.85 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. 13.85.1 With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre sqm 498.69 71.88 71.88 35,845.84 995473 18%

98 13.82/13.85 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour/ Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. 13.83.2 Two coats/ 13.85.3 With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre sqm 1,740.61 211.12 211.12 367,478.12 995473 18%

99 16.68 16.68 Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. sqm 108.00 1112.33 1112.33 120,131.64 995479 18%

100 16.69 16.69 Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). sqm 90.00 10074.78 10074.78 906,730.20 995421 18%

101 17.10.1.1 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040 mm bowl depth 250 mm each 8 7027.74 7027.74 56,221.92 995478 18%

102 17.22A Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. each 16 1036.59 1036.59 16,585.44 995478 18%

103 17.22B Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. (a) 15 mm nominal dia each 16 7157.22 7157.22 114,515.52 995478 18%

104 17.28.1.1 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi regid pipe 32mm dia each 8 106.39 106.39 851.12 995478 18%

105 17.31 17.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. each 16 1650.55 1650.55 26,408.80 995478 18%

106 17.35. Providing and fixing soil, waste and vent pipes : 100 mm dia 17.35.1.3 Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905 mtr 90 1241.28 1241.28 111,715.20 995478 18%

107 17.35. Providing and fixing soil, waste and vent pipes : 75 mm diameter : 17.35.2.3 Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905 Mtr 15 1014.73 1014.73 15,220.95 995478 18%

108 17.36.1 Providing and filling the joints with spun yarn cement slurry and cement mortar 1:2 (1cement:2fine sand) in SCI/ CI 75mm dia each 12 162.23 162.23 1,946.76 995478 18%

109 17.37.2 Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. : For 75 mm dia pipe (for vent pipes) each 12 356.1 356.1 4,273.20 995478 18%

110 17.39.1.3 Providing and fixing plain bend of required degree. 100mm dia. 17.39.1.3 Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905 each 20 404.75 404.75 8,095.00 995478 18%

111 17.39.2.3 17.39.2 75 mm dia 17.39.2.3 Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905 each 9 286.21 286.21 2,575.89 995478 18%

112 17.40 Providing and fixing heel rest sanitary bend 17.40.1 100 mm dia 17.40.1.1 Sand cast iron S&S as per IS - 1729 each 15 600.37 600.37 9,005.55 995478 18%

114 17.42 Providing and fixing double equal plain junction of required degree. 17.42.1 100x100x100x100 mm 17.42.1.3 Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905 each 12 842.96 842.96 10,115.52 995478 18%

115 17.43 Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 17.43.1 100x100x100 mm 17.43.1.1 Sand cast iron S&S as per IS - 1729 each 16 785.07 785.07 12,561.12 995478 18%

116 17.56 Providing and fixing terminal guard : 17.56.1 100 mm 17.56.1.3 Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 each 9 467.39 467.39 4,206.51 995478 18%

117 17.57A Providing and fixing shielded coupling for Hubless centrifugally cast iron pipe. 17.57A.1 100 mm dia 17.57A.1.1 SS 304 grade coupling with EPDM rubber gasket each 15 475.23 475.23 7,128.45 995478 18%

118 17.58.1 Providing lead caulked joint to SCI/ centrifugally cast (Spun) iron pipes and fittings of diametre. 100mm dia each 48 642.9 642.9 30,859.20 995478 18%

119 17.59 Providing and fixing M.S. stays and clamps for sand cast iron/ centrifugally cast (spun) iron pipes of diameter : 17.59.1 100 mm each 30 150.48 150.48 4,514.40 995478 18%

120 17.60 Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 17.60.1 100 mm inlet and 100 mm outlet 17.60.1.3 Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 each 6 889.92 889.92 5,339.52 995478 18%

121 17.77 Providing and fixing M.S. holder bat clamp of approved design to sand cast iron/ cast iron (spun) pipes comprising of M.S. flat brackets made of 50x5 mm flat of specified shape, projecting 75 mm outside the wall surface and fixed on wall with 4nos, 6mm dia expansion hold fasteners, including drilling necessary holes in brick wall/ CC/RCC surface and the cost of bolts etc. The pipes shall be fixed to the already fixed brackets with the help of 30 mm x1.6 mm galvanised M.S. flats of specified shape and of total length 420 mm and shall be fixed with M.S. nuts, bolts, & washers of size 25x6 mm, one bolts on each side of the pipe. 17.77.2 Total bracket length 810 mm of approved shape and design (for two 100 mm dia pipes) each 56 358.97 358.97 20,102.32 995478 18%

122 18.17 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 18.17.1 25 mm nominal bore each 6 622.66 622.66 3,735.96 995424 18%

124 18.22 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 18.22.1 100 mm diameter each 16 194.57 194.57 3,113.12 995424 18%

125 18.49 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 18.49.1 15 mm nominal bore each 28 507.86 507.86 14,220.08 995424 18%

126 18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. per litre 8000 11.34 11.34 90,720.00 995424 18%

127 18.51 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 18.51.1 15 mm nominal bore each 9 828.58 828.58 7,457.22 995424 18%

128 18.53 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931. 18.53.1 15mm nominal bore each 54.00 585.23 585.23 31,602.42 995424 18%

129 18.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 18.7.1 15 mm nominal dia Pipes metre 80 299.31 299.31 23,944.80 995424 18%

134 18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 18.8.1 15 mm nominal dia Pipes Mtr 30 515.98 515.98 15,479.40 995424 18%

137 18.75.1 Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. 15 mm nominal bore, weighing not less than 32 gms each 8 50.36 50.36 402.88 995424 18%

138 19.1.2 Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 150 mm diameter Metre 9 691.73 691.73 6,225.57 995424 18%

139 19.1.5 Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 300 mm diameter metre 60 2075.54 2075.54 124,532.40 995424 18%

140 19.3.5 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design : 300 mm diameter S.W. pipe metre 60 1273.86 1273.86 76,431.60 995424 18%

141 19.4.1.1 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 100x100 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 each 10 2869.78 2869.78 28,697.80 995424 18%

142 19.6 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 19.6.4 300 mm dia. R.C.C. pipe mtr 30 1055.07 1055.07 31,652.10 995424 18%

143 19.7.1.1 Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With F.P.S. bricks with class designation 75 each 6 13669.73 13669.73 82,018.38 995424 18%

144 19.8 Extra for depth for manholes : 19.8.1 Size 90x80 cm 19.8.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Mtr 9 9506.21 9506.21 85,555.89 995424 18%

145 19.18.2 Supplying and fixing C.I. cover without frame for manholes : 500 mm diameter C.I. cover (medium duty) the weight of the cover to be not less than 58 kg each 5 3765.08 3765.08 18,825.40 995424 18%

146 19.21 Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : 19.21.2 For pipes 250 to 300 mm diameter each 8 919.23 919.23 7,353.84 995424 18%

147 19.32.1 Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 each 3 32784.1 32784.1 98,352.30 995424 18%

148 22.5 Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed withwater proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. sqm 115.17 604.24 604.24 69,590.32 995416 18%

149 22.14.1 Grading roof for water proofing treatment with 22.14.1 Cement concrete 1:2:4 Cum 38.762305 8784.9 8784.9 340,522.97 995453 18%

150 22.23.2 Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI- 212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage. 22.23.2 For horizontal surface one coat @1.10 kg per sqm. sqm 781.9861 364.35 364.35 284,916.64 995453 18%

151 25.1 25.1 Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawings , the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA2604 of required colour and shade as approved by the Engineer-in-Charge. ( The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account). The weight of aluminium extruded section shall be taken for purpose of payment. Kg 53.07 433.3 433.3 22,995.23 995474 18%

152 26.86.3 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/clerestory windows & desertory other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. 26.86.3 Frame size 50 x 100 mm Mtr 79.8 997.71 997.71 79,617.26 995421 18%

154 26.87.1 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 26.87.1 30 mm thick sqm 86.47 4624.77 4624.77 399,903.86 995476 18%

156 26.89.1 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid board one side white color and other side of board laminted with PVC foil of minimum 14 micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations and bathroom/kitchen cabinet etc. of required sizes comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/ mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel piano hinges/soft close clip on concealed hinges and necessary S.S screws shall be paid separately) 26.89.1 18 mm thick sqm 147.51 3174.59 3174.59 468,283.77 995476 18%

157 26.90.1 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain white color board for backing of cup boards and bathroom/kitchen cabinets etc. of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel screws etc. all as per direction of Engineer-InCharge. (Note: stainless steel screws shall be paid separately) 26.90.1 6 mm thick sqm 70.696 1148.59 1148.59 81,200.72 995476 18%

159 17.3.1 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : 17.3.1 W.C. pan with ISI marked white solid plastic seat and lid each 16 8118.84 8118.84 129,901.44 995478 18%

160 9.168 9.168 Providing and fixing cupboard shutter with 19mm thick one side decorative and other side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2mm thick PVC edge banding tape with hot glue by edge bending machine etc. with auto closing spring loaded hinges (hydraulic type) etc. complete as per direction of Engineerin-charge.(Payment of providing and fixing auto closing hinges shall be paid separately) sqm 51 2998.67 2998.67 152,932.17 995476 18%

161 9.169 9.169 Providing and fixing 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand boxes,shelves,racks,almirah,cupboard and drawer etc. including necessary nails,screws etc. complete as per direction of Engineer-in-charge. sqm 300 2736.5 2736.5 820,950.00 995476 18%

162 10.28 10.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). Kg. 1040 716.11 716.11 744,754.40 995476 18%

DSR (E&M) 2022 Item No. "PART 3 RESIDENTIAL ELECTRICAL RECONSTRUCT"

SUB HEAD -I: WIRING

1 1.10.3 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. ( Group C) Point 256 1309.82 1309.82 335,313.92 995461 18%

2 1.11 Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Point 17.00 1394.64 1394.64 23,708.88 995461 18%

3 1.55.3 Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.Group-C (looping point ) Point 128.00 766.07 766.07 98,056.96 995461 18%

4 1.14 Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 0.00 0.00 0 0.00 18%

5 1.14.1 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire For 6A Light Circuit Point Metre 238.00 208.04 208.04 49,513.52 995461 18%

6 1.14.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire For 6A UPS & Light Circuit Point Metre 198.00 245.54 245.54 48,616.92 995461 18%

7 1.14.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire For 16A Power Circuit Point Metre 180.00 298.21 298.21 53,677.80 995461 18%

8 1.14.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire For AC Circuit Point Metre 160.00 391.96 391.96 62,713.60 995461 18%

9 1.14.10 4 X 10 sq. mm + 2 X 6 sq. mm earth wire For TPN LDB Submain wire Metre 120.00 897.32 897.32 107,678.40 995461 18%

10 1.14.11 4 X 16 sq. mm + 2 X 6 sq. mm earth wire For TPN LPDB Submain wire Metre 100 1218.75 1218.75 121,875.00 995461 18%

11 1.57 Supplying & fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required. Each 26.00 649.11 649.11 16,876.86 995461 18%

12 SUB HEAD -II: TELEPHONE AND TV 0.00 0 0.00

13 1.18 Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. 0.00 0 0.00

15 1.19 Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required. Meter 421.00 41.96 41.96 17,665.16 995424 18%

16 1.21 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 0.00 0 0.00

18 1.24 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 0.00 0 0.00

19 1.24.6 Telephone socket outlet Each 28.00 132.14 132.14 3,699.92 995461 18%

20 1.24.7 TV antenna socket outlet Each 28.00 132.14 132.14 3,699.92 995461 18%

21 SUB HEAD -III: SUB MAIN 0.00 0 0.00 18%

22 1.7 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 0.00 0 0.00

25 SUB HEAD -IV: FIXTURES 0.00 0 0.00 18%

26 1.32 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. Each 43.00 523.21 523.21 22,498.03 995461 18%

27 1.31 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. Each 72.00 425.89 425.89 30,664.08 995461 18%

28 1.56 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings). Each 24.00 603.57 603.57 14,485.68 995461 18%

29 1.27 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required. 0.00 0 0.00

35 1.24 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 0.00 0 0.00

38 1.25 Supplying and fixing two module stepped type electronic fanregulator on the existing modular plate switch box includingconnections but excluding modular plate etc. as required. Each 43.00 329.46 329.46 14,166.78 995461 18%

39 1.26 Supplying and fixing modular blanking plate on the existingmodular plate & switch box excluding modular plate asrequired. Each 40.00 35.71 35.71 1,428.40 995461 18%

40 1.33 Supplying and fixing 3 pin, 5 A ceiling rose on the existingjunction box/ wooden block including connections etc. as required. Each 109.00 77.68 77.68 8,467.12 995461 18%

41 1.58 Supplying and fixing PVC batten/ angle holder including connections etc. as required. Each 84.00 98.21 98.21 8,249.64 995461 18%

42 SUB HEAD -IV: INSTALATION, TESTING & COMMISSIONING 0.00 0 0.00

43 1.35 Installation ,Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required. Each 78.00 106.25 106.25 8,287.50 995461 18%

44 1.41 Installation, testing and commissioning of pre-wired,fluorescent fitting / compact fluorescent fitting of all types,complete with all accessories and tube/lamp etc. directly onceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. Each 56.00 183.93 183.93 10,300.08 995461 18%

45 1.44 Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required. Each 41 190.18 190.18 7,797.38 995461 18%

46 1.50.1 Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required (Upto 450 mm sweep) Each 28.00 401.79 401.79 11,250.12 995461 18%

47 SUB HEAD -V: MCB'S AND MAIN DISTRIBUTION BOARDS 0.00 0 0.00

48 2.3 Supplying and fixing following way, single pole and neutral,sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 0.00 0 0.00

50 2.1 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 0.00 0 0.00

53 2.13.2 Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 amps Each 32.00 923.21 923.21 29,542.72 998736 18%

54 2.14 Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 0.00 0 0.00

57 NS Fabrication, supply, erection and commissioning of distribution panel duly painted with apprved shade (approx. dimensions: 1500 mm wide x 2.10 mm ht x 300 mm deep) fabricated out of 2 mm thick CRCA sheet with cover, hinges on one side, locking arrangement on the other side with following MCBs energy meters etc alongwith 0-500 voltmeter(96x96 mm), indicating lamps, toggle swith, slide lock fuse etc including interconnections as required. (1) Incoming 100 A - 4 pole RCCB with 300 mA current sensitivity - 1 no (2) DP 32 A MCB - 7 nos (3) 10-40 A, 1 - ph static Energy Meter - 5 nos (4) 4 strips 100 A tinned Copper Bus bar(50mm x 5mm x 500 mm) - I Set Each 4.00 63600.00 63600 254,400.00 998731 18%

58 2.11 Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. Each 34.00 11.61 11.61 394.74 998736 18%

59 2.21 Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required. Each 4.00 240.18 240.18 960.72 998736 18%

60 SUB HEAD -V: EARTHING AND LIGHTNING PROTECTION 0.00 0 0.00

61 5.2 Earthing with G.I. earth pipe 4.5 metre long, 40 mm diaincluding accessories, and providing masonry enclosure withcover plate having locking arrangement and watering pipe etc.with charcoal/ coke and salt as required. Each 17.00 6120.54 6120.54 104,049.18 998739 18%

62 5.12 Providing and laying earth connection from earth electrodewith 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earthelectrode including connection with G.I. thimble excavation and re-filling as required. Meter 90.00 256.25 256.25 23,062.50 998739 18%

63 5.15 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. Meter 45.00 217.86 217.86 9,803.70 998739 18%

64 6.2 Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required. Each 5.00 462.50 462.5 2,312.50 998739 18%

65 6.4 Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other metallic object) by riveting / nut bolting/ sweating and soldering etc as required. Each 60.00 100.89 100.89 6,053.40 998739 18%

66 6.7 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run) Meter 60.00 112.50 112.5 6,750.00 998739 18%

67 6.8 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run) Meter 60.00 175.89 175.89 10,553.40 998739 18%

68 14.13.1 Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required 50 mm dia Meter 45 584.11 584.11 26,284.95 995462 18%

69 POWER CABLES 0.00 0 0.00

70 7.1 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. 0.00 0 0.00

72 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 0.00 0 0.00 18%

PERCENTAGE & AMOUNT QUOTED ABOVE THE ESTIMATED COST OR BELOW THE ESTIMATED COST IN FIGURE FOR DSR ITEMS [ SCHEDULE-1 ] Quoted Percentage(%) [ As quoted above in Column No.G ] Quoted Amount [ for Schedule 1 ] ( Exclusive of GST)

Note: * While quoting their Percentage component the bidder shall exclude applicable GST. GST shall however be indicated in Schedule-1. GST shall be paid extra as applicable correspnding to the SAC/HSN Codes indicated in Schedule-1.

Date: 11/Jun/2024 Printed Name: Printed Name

Place: Place Designation: Desig

Specification No.:NESH/CSM/OT/PRANIT/1500-1310 [PKG E]/BPS-Vol-IC Schedule - 2 of BPS, Vol-IC

Name of Package:Demolition & Re-construction of residential Quarters at 132 kV Salakati Substation under O&M ADD CAP 2019-24 [Package-E]

(Bill of Quantities for NON-DSR Items)

Bidder’s Name and Address

Name : XXYYZZ C&M Deptt.

Address : aaAAbbBB Power Grid Corporation of India Ltd.,

xxXXyyYY NERTS, Lower Nongrah, Lapalang

Shillong - 793006

We declare that following are our Total Bid Prices in Rupees for the expenditure incurred for the entire scope of work as specified in the specifications and documents. We have indicated the Unit Rates and Amount to the Total Estimated Cost as indicated in the “Bill of Quantity (BOQ) & Prices” covering the entire scope of works enclosed herewith as Schedule-2. Incase of discrepancy, the quoted Unit Rates as per this Schedule shall prevail.

Demolition & Re-construction of residential Quarters at 132 kV Salakati Substation under O&M ADD CAP 2019-24 [Package-E]

Sl. Non-Schedule Description Unit Total Qnty Quoted Unit Rate Quoted Amount in Rs. HSN/SAC CODES Whether SAC in column ‘(H)' is confirmed. If not indicate applicable the SAC # Rate of GST applicable (in %) Whether rate of GST in column ‘(J)’ is confirmed. If not indicate applicable rate of GST #

"PART 1 RESIDENTIAL CIVIL RECONSTRUCTION " 0.00

1 NS-1 Construction of drains 300mm wide with 300mm depth by providing base PCC 1:4:8 and full brick wall of mortar 1:6 and plastering with a coat of neat cement of mortar 1:4 (1 cement:4 fine sand) all complete including back filling. Mtr 150 0.00 995462 18%

2 NS-2 Supplying, installing, testing and commissioning approved make 15mm CP health faucet with CP flexible tube 1.2 m long and wall hook (model no. ADL-573 of Jaquar or equvalent), CP crutch, nozzle & 2 way Bib Cock (model no. OPP-15041PM of Jaquar or equivalent) with wall flange etc.,complete. The water flow rate is 6 ltrs/Min each 16 0.00 995462 18%

3 NS-3 Providing and fixing Braided hose with Two 15mm Nuts & Rubber washers with both side Nipple of Jaquar or equivalent make -450 mm length. each 10 0.00 995462 18%

4 NS-4 Supply and fixing of SS Shield coupler 50mmx 40mm dia each 12 0.00 995462 18%

5 NS-5 Providing and Fixing Stainless steel 304 grade bracket with necessary screws Kg 13 0.00 995462 18%

6 NS-6 Providing brass cupboard locks with six levers of approved quality including necessary screws etc. complete. Size 40mm (in cupboards) each 22 0.00 995476 18%

7 NS-7 Supply and fixing of SS Handles 100mm Nos 21 0.00 995462 18%

8 NS-8 Supply and fixing of SS Handles 125mm Nos 21 0.00 995462 18%

9 NS-9 Supply and appication of Silicon Sealent around UPVC windows and doors of quarters. Mtr 200 0.00 995476 18%

10 NS-10 Providing and Fixing CPVC ball valves 20 mm each 6 0.00 995462 18%

11 NS-11 Providing and fixing High Grade AISI 304 Stainless Steel Ball Bearing Drawer Slides Soft Closing channels 500mm long with necessary Stainless Steel screws etc. complete as per directions of Engineer in-charge. Kich or equivqlent make Pair 32 0.00 995476 18%

12 NS-12 Providing and fixing Cabinet & Drawer Handle(304 Grade)with necessary SS screws of Kich Make or equivalent make. complete as per direction of Engineer in charge Tubular shape 10mm x 224mm. each 21 0.00 995476 18%

13 NS-13 Providing and fixing stainless steel (304 Grade) Cutlery Plain Wired Basket of approximately size 386x500x100 mm along with PVC Cutlery Tray of approximate Size 380-440x501-550x55 mm of Hittice or approved approved make including stainless steel Patti/ bracket, nails, stainless steel screws etc. complete as per direction of Engineer-in-charge. Each 8 0.00 995476 18%

14 NS-14 Providing and fixing stainless steel (304 Grade) plain wired basket of size 386x500x100mm of Hittich or approved equivalent make with Stainless steel patti/basket, nails, stainless steel screws etc. complete as per direction of Engineer-in-Charge. each 14 0.00 995476 18%

15 NS-15 Providing and fixing stainless Steel (304 Grade)Grain/plain wired basket of size 386x500x200mm of Hittich or approved equivalent make with Stainless steel patti/basket, nails, stainless steel screws etc. complete as per direction of Engineer-in-Charge. each 14 0.00 995476 18%

16 NS-16 Providing and fixing Stainless Steel (304 Grade) Wall mounted door stop (Satin Finish) with rubeer buffer or equivqlent make. each 10 0.00 995476 18%

17 NS-17 Providing P.O.P decorative moulding, cornices etc. i/c required scaffolding, hacking to plaster surface wherever required. complete as per Architect drawing & direction of Engineer-in-Charge Corner decorative moulding of size 50x75mm Mtr 495 0.00 995472 18%

18 NS-18 Providing and fixing GI plaster mesh (Arpita or equivalent) made out of galvanized iron of nominal thickness 0.35mm with a zinc coating of 120 gms per sqm along the junctions of masonry and concrete works including fixing, scaffolding, lead and lifts etc. as per the directions of the Engineer in Charge. sqm 365 0.00 995472 18%

19 NS-19 Providing & fixing couinter sunk Wash basin of size 580x355x130mm, 32mm C.P. Waste coupling of Somany or equivalent make. each 16 0.00 995462 18%

20 NS-20 Providing and fixing C.P. brass shower arm. each 16 0.00 995462 18%

21 NS-21 Providing and fixing SS AISI-304 grade towel rail complete with brackets fixed with CP brass screws PVC Sleeves, etc complete. 650MM long of approved make. each 16 0.00 995462 18%

22 NS-22 Supply and installation of kitchen chimney Signia 60 cm autoclean function and a chimney with 60 cm autoclean technology with 1200 suction capacity of Kutchina or equivalent all complete as per instruction of EIC. each 8 0.00 995462 18%

"PART 2 RESIDENTIAL ELECTRICAL RECONSTRUCT " 0.00

1 NS Providing and laying 1.1kV Grade PVC insulated Power Cable 3½ X 35 sq. mm MTR 900 0.00 998736 18%

2 NS Providing and laying 1.1kV Grade PVC insulated Power Cable 3½ X 50 sq. mm MTR 750 0.00 998739 18%

3 HEAD -2: Supply Unit 0.00

4 NS Ceiling Fan (1200 mm sweep) of reputed brand. Nos 46 0.00 84145120 18%

5 NS Exhaust fan (450 mm sweep for kitchen) of reputed brand. Nos 10 0.00 84145930 18%

6 NS Exhaust Fans 250 mm sweep for toilet (with louver having bird screen of approved brand. Nos 20 0.00 84145190 18%

7 NS 18 W LED Tube Light of reputed brand. Nos 61 0.00 94054090 18%

8 NS 14W Bracket Light, Decorative, wall mounting of reputed brand. Nos 71 0.00 94054090 18%

9 NS 9W Spot light/ Down light of reputed brand. Nos 90 0.00 94051090 18%

10 NS 10W Bulk Head Light of reputed brand. Nos 13 0.00 94054090 18%

11 NS Modular Indicator for switchboard Nos 55 0.00 85049090 18%

12 NS Door Bell of reputed brand. Nos 10 0.00 85311090 18%

13 NS Krone type Distribution Board 20 pair of reputed brand. Nos 5.00 0.00 85176990 18%

AMOUNT QUOTED IN FIGURE FOR NON DSR ITEMS [ SCHEDULE-2 ] Quoted Amount [ for Schedule 2 ] ( Exclusive of GST)

Note : * While quoting their Unit rates the bidder shall exclude applicable GST. GST shall however be indicated in Schedule-2. GST shall be paid extra as applicable correspnding to the SAC/HSN Codes indicated in Schedule-2.

Date: 11/Jun/2024 Printed Name: Printed Name

Place: Place Designation: Desig

Specification No.NESH/CSM/OT/PRANIT/1500-1310 [PKG E]/BPS-Vol-IC SUMMARY of BPS, Vol-IC

Package: Demolition & Re-construction of residential Quarters at 132 kV Salakati Substation under O&M ADD CAP 2019-24 [Package-E]

(GRAND SUMMARY)

Bidder’s Name and Address:( Sole Bidder) To,

Name : Name Sr. General Manager (C&M)

Address : Add1 Power Grid Corporation of India Limited

Add2 North Eastern Region

Dongtieh, Lower Nongrah, Lapalang

Sl. No. Description Total Price (INR)

1 TOTAL SCHEDULE NO. 1

Scheduled Items/DSR Items] ₹ 39,560,602.58 0 0 0 0 0

2 TOTAL SCHEDULE NO. 2

Non-Scheduled Items/Non-DSR Items ₹ 0.00 0 0 0 0 0

GRAND TOTAL [ Excluding GST] ₹ 39,560,602.58

Date : 11/Jun/2024 Printed Name: Printed Name

Place : Place Designation: Desig

ENVELOPE-1: Techno-Commercial Part (Bid Proposal Sheet).

:: COVER PAGE ::

Name of Package Demolition & Re-construction of residential Quarters at 132 kV Salakati Substation under O&M ADD CAP 2019-24 [Package-E]

NIT Ref. No.: NESH/CSM/OT/PRANIT/1500-1310 [PKG E] Dated:14/06/2024

Package Code NESH/CSM/OT/PRANIT/1500-1310 [PKG E] /BPS-Vol-IB

Address of Purchaser/ Owner Senior General Manager (C&M)

Power Grid Corporation of India Limited.

Dongtieh, Lower Nongrah, Lapalang.

Shillong - 793006.

Email: [email protected] | [email protected]

General guidelines for filling up the Attachments

: Attachments : Demolition & Re-construction of residential Quarters at 132 kV Salakati Substation under O&M ADD CAP 2019-24 [Package-E] Demolition & Re-construction of residential Quarters at 132 kV Salakati Substation under O&M ADD CAP 2019-24 [Package-E]

NESH/CSM/OT/PRANIT/1500-1310 [PKG E] Dated:14/06/2024

1 Fill up only green shaded cells in the relevent attachments.

2 Attachments 3(QR), Attach QR, 4, 4(A), 4(B), 5, 5(A), 6, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20,21 and Bid Form for 1st Envelope are included here.

3 Attachment 1 Bid Security : To be submitted as per proforma provided in the bidding document.

4 Attachment 2 Power of Attorney : No specific format is provided by POWERGRID. Bidder may use their own format.

5 Attachment 8 Manufacturer’s Authorisation Form : Format for Manufacturer’s Authorisation Form is annexed Seperetely herewith this Volume

6 Attachment 14 Integrity Pact : To be submitted as per the proforma Annexed separately herewith this volume.

7 Attachment 18 Safety Pact : NOT APPLICABLE

8 Attachment 19 Declaration of Key Managerial Person and Power of Attorney holder: Format is annexed Seperetely herewith this Volume

9 Attachment 20 Affidavit of Self certification regarding Minimum Local Content in line with PPP-MII order and MoP Order December 2018: Format is annexed Seperetely herewith this Volume

10 Attachment 21 Declaration regarding events encountered pursuant to ITB Clause 2.1: Format is annexed Seperetely herewith this Volume

11 Attachment 22 Format for Affidavit of Self certification regarding Local Content in line with PPP-MII order and DoT order, if applicable, to be provided on a non-judicial stamp paper of Rs. 100/-.

12 Attachment Format of ‘Authorization certificate issued by Domestic Manufacturer for selling Domestically Manufactured Iron & Steel Products’

13 Attachment 22: Format for Affidavit of Self Certification regarding Domestic Value Addition in Iron & Steel Products to be provided on a non-judicial stamp paper of Rs. 100/-.

14 Attachment 27:Undertaking by the bidder regarding Compliance of DMI&SP policy

Note : Enable the Active X Control & Macros. Also ensure to keep option of "Trust acess to VBA project object Model" cheched [√]. Ensure that you work on MS Excel 2007 or higher version.

पावर ग्रिड कारपोरेशन ऑफ इण्डिया लिमिटेड

(भारत सरकार का उद्यम)

Power Grid Corporation of India Limited

(A Government of India Enterprises)

General Instruction to the Bidders for filling up this workbook for Demolition & Re-construction of residential Quarters at 132 kV Salakati Substation under O&M ADD CAP 2019-24 [Package-E]

I While filling up the worksheets following may please be observed :

(i) Fill up only green shaded cells.

(ii) Certain data type entries have been restricted, such as Numeric values or limits of numeric values.

(iii) Select only the options provided in pull down menus.

(iv) Do not link any cell of this work book with any other work book.

(v) Do not use copy & paste or cut & paste options for filling up the data.

(vi) Do not reformat any of the cell of the work book.

Happy Bidding !

Demolition & Re-construction of residential Quarters at 132 kV Salakati Substation under O&M ADD CAP 2019-24 [Package-E]

NESH/CSM/OT/PRANIT/1500-1310 [PKG E] Dated:14/06/2024 Sole Bidder 1

JV (Joint Venture) 2 or More

Enter following details of the bidder

Specify type of Bidder [Select from drop down menu] Sole Bidder Sole Bidder 1

1 JV (Joint Venture) 2 or More

Micro and Small Enterprise (MSE)

Name of Sole Bidder Name

Address of Sole Bidder Principal place of business Add1

Enter the name of Registration Authority. Udyam Registered Bidder

Whether Medium/Small/Micro

Udyam Registeration No.:

Type of Enterprise

Social Category of Enterpreneur

Printed Name Printed Name

Designation Desig

Date : 8 Sep 2024

NESH/CSM/OT/PRANIT/1500-1310 [PKG E] Dated:14/06/2024 Bid Form 1st Envelope 1 one 1 st 1 January

2 two 2 nd 2 February

BID FORM (First Envelope) 3 three 3 rd 3 March

4 four 4 th 4 April

Bid Proposal Ref. No.: 5 five 5 th 5 May

Date: Sep 6 six 6 th 6 June

7 seven 7 th 7 July

To: 8 eight 8 th 8 August

Sr.GM(Contract & Material Department) 9 nine 9 th 9 September

Power Grid Corporation of India Ltd., the Facilities under the above-named package in full conformity with the said Bidding Documents. In accordance with SCC 18.0.0 of the Bidding Documents, as per which the bid shall be submitted by the bidder under “Single Stage - Two Envelope” procedure of bidding. Accordingly, we hereby submit our Bid, in single envelope. " 10 ten 10 th 10 October

North Eastern Region 11 eleven 11 th 11 November

Dongtieh, Lower Nongrah 12 twelve 12 th 12 December

Lapalang, Shillong-793006 (Meghalaya) 13 thirteen 13 th

14 fourteen 14 th

Name of Contract : Demolition & Re-construction of residential Quarters at 132 kV Salakati Substation under O&M ADD CAP 2019-24 [Package-E] Demolition & Re-construction of residential Quarters at 132 kV Salakati Substation under O&M ADD CAP 2019-24 [Package-E] 15 fifteen 15 th

Dear Ladies and/or Gentlemen, Enter details here. 16 sixteen 16 th

0.0 We meet the eligibility requirements and have no conflict of interest in accordance with ITB Clause 2.

0.0 Attachments to the Bid Form (First Envelope) Bank Draft 18 eighteen 18 th

In line with the requirement of the Bidding Documents, we enclose herewith the following Attachments: Enter details of EMD/ Bid Security here. Pay Order 19 nineteen 19 th

(a) Attachment 1

Bid security has not been submitted as our firm is registered under Udyam Registeration. Valid Udyam Registeration Certificate certificate being submitted instead of Bid Security, so as to reach C&M Department of POWERGRID, Shillong before deadline for submission of Bid specified in SCC. The soft/scanned copy is uploaded through the portal. Type of EMD Currency Amount Validity of EMD Name of Inssuing Bank Bid Security - in orginial (hard copy/ Physical form), for sum of 834000 submitted in a separate envelope in accordence with Cl.No.2.0.0 of SCC, in the form of Bank Guarantee issued by initially valid upto 00/01/1900 so as to reach C&M Department of POWERGRID, Shillong before deadline for submission of Bid specified in SCC. The soft/scanned copy is uploaded through the portal. Bid security has not been submitted as our firm is registered under Udyam Registeration. Valid Udyam Registeration Certificate certificate being submitted instead of Bid Security, so as to reach C&M Department of POWERGRID, Shillong before deadline for submission of Bid specified in SCC. The soft/scanned copy is uploaded through the portal. --------------------------POWERGRID Online Payment Utility Portal Acknowledgment Slip------- ……………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………. Banks certified Cheque Zero 20 twenty 20 th

OR, Documentary evidence in support of exemption of Bid Security, in separate envelope in accordance with clause 13.1 of ITB, Section-II.

(b) Attachment 2 A power of attorney duly authorized by a Notary Public indicating that the person(s) signing the bid have the authority to sign the bid and thus that the bid is binding upon us during the full period of its validity in accordance with the ITB Clause 14. Bank Guarantee Rs 834000 Bank Guarantee (Validity of EMD) 21 st

© Attachment 3 (QR) The documentary evidence that we are eligible to bid in accordance with ITB Clause 2. Further, in terms of ITB Clause 9.3(c) & (e), the qualification data has been furnished as per your format enclosed with the bidding documents [Attachment – 3(QR)]. FDR 22 th

(d) Attachment 4, 4A: The documentary evidence establishing in accordance with ITB Clause 3, Vol.-I of the Bidding Documents that the facility offered by us are eligible facilities and conform to the Bidding Documents has been furnished as Attachment 4 . Moreover, a list of Special Tools & Tackles to be furnished by us, the cost of which are included in our Bid Price, is also enclosed as per your format as Attachment- 4A. Not Applicable 24 th

(e) Attachment 5 : The details of all major items of services or supply which we propose subletting in case of award, giving details of the name and nationality of the proposed subcontractor/sub-vendor for each item. 25 th

(f) Attachment 5A : (Items, Components, Raw Material, Services proposed to be sourced from Micro and Small Enterprises): The details of the items, components, raw material, services which is proposed to bought/availed from Micro and Small Enterprises for the purpose of completion of works.

(g) Attachment 6 : The variation and deviations from the requirements of the Conditions of Contract, Bid Data Sheet and other commercial conditions, Technical Specification and Drawings (excluding critical provisions as mentioned at clause 6.0 below) in your format enclosed with the Bidding Documents, including, inter-alia, the cost of withdrawal of the variations and deviations indicated therein. 26 th

(h) Attachment 7: The details of Alternative Bids made by us indicating the complete Technical Specifications and the deviation to contractual and commercial conditions. [NOT APPLICABLE] 28 th

(i) Attachment 8: Manufacturer’s Authorisation Forms [NOT APPLICABLE] 29 th

(j) Attachment 9: Work Completion Schedule

(k) Attachment 10: Guarantee/ Defect liability Declaration 30 th

(l) Attachment 11: Information regarding ex-employees of Employer in our firm 31 st

(m) Attachment 12: Filled up information regarding Price Adjustment Data as per the format enclosed in the bidding documents [Firm & Fixed]

(n) Attachment 13: Declaration regarding Social Accountability

(o) Attachment 14: Integrity Pact, in a separate envelope, duly signed on each page by the person signing the bid.[APPLICABLE for package value > 1 Crore]

(p) Attachment 15: (Option for Initial Advance (either Interest Bearing Initial Advance or No Initial Advance) and Information for E-payment, PF details and declaration regarding Micro/Small & Medium Enterprises)

(q) Attachment 16: Additional information Option for Initial Advance (either Interest Bearing Initial Advance or No Initial Advance) - NOT Applicable and Information for E – payment, PF details and declaration for Micro/Small and Medium Enterprise

(r) Attachment 17: Declaration for tax exemptions, reductions, allowances or benefits

(s) Attachment 18: Safety

(t) Attachment 19: Declaration

(u) Attachment 20: Affidavit of Self certification regarding Minimum Local Content in line with PPP-MII order and MoP Order December 2018

(v) Attachment 21: Certificate from statutory auditor or cost auditor of the company (in the case of companies) or from a practicing cost accountant or practicing chartered accountant (in respect of suppliers other than companies) giving the percentage of Local Content, in line with PPP-MII order, if applicable [in case of packages above Rs. 10 Cr]

(w) Attachment 22: Undertaking by the bidder regarding Compliance of DMI&SP policy

(x) Attachment 23: Code of Integrity for Public Procurement ( CIPP)

0.0 We are aware that, in line with Clause No. 27.1 (ITB), our Second Envelope (Price Part) is liable to be rejected in case the same contains any deviation/omission from the contractual and commercial conditions and technical Specifications other than those identified in this First Envelope.

3.0.A We are a Micro and Small Enterprise (MSE) registered with Name, a designated Authority of GoI under the Public Procurement Policy for MSEs order 2012. (Applicable only for MSE Bidder)

0.0 We confirm that except as otherwise specifically provided our Bid Prices in Second Envelope include all taxes, duties, levies and charges as may be assessed on us, our Sub-Contractor/Sub-Vendor or their employees by all municipal, state or national government authorities in connection with the Facilities, in and outside of India.

0.9 100% of applicable Taxes and Duties i.e. GST, which are payable by the Employer under the Contract, shall be reimbursed by the Employer on production of satisfactory documentary evidence by the Contractor in accordance with the provisions of the Bidding Documents.

0.9 We confirm that we have also registered/we shall also get registered in the GST Network with a GSTIN, in all the states where the project is located and the states from which we shall make our supply of goods.

0.0 Construction of the Contract:

0.9 We declare that we have studied Clause GCC 2.1 relating to mode of contracting for Domestic Bidders and we are making this proposal with a stipulation that you shall award us two separate Contracts viz ‘First Contract’ for ex-works supply of all equipment and materials including mandatory spares and ‘Second Contract’ for providing all the services i.e. inland transportation for delivery at site, In-transit insurance, unloading, handling at site, installation, testing and commissioning including Trial operation in respect of all the equipment supplied under the ‘First Contract’ and other services specified in the Contract Documents.

We declare that the award of two contracts, will not, in any way, dilute our responsibility for successful operation of plant/equipment and fulfillment of all obligations as per Bidding Documents and that both the Contracts will have a cross-fall breach clause i.e. a breach in one Contract will automatically be classified as a breach of the other contract which will confer on you the right to terminate the other contract at our risk and cost.

0.0 We undertake, if our bid is accepted, to commence the work immediately upon your Notification of Award (NOA)/ Letter of Award (LOA) to us, and to achieve the delivery of goods and related services within the time stated in the Bidding Documents.

0.0 If our bid is accepted, we undertake to provide a Performance Security in the form and amounts, and within the times specified in the Bidding Documents.

0.0 Until a formal Contract is prepared and executed between us, this bid, together with your written acceptance thereof in the form of your Notification of Award shall constitute a binding contract between us.

0.0 We understand that you are not bound to accept the lowest or any bid you may receive.

0.0 We, hereby, declare that only the persons or firms interested in this proposal as principals are named here and that no other persons or firms other than those mentioned herein have any interest in this proposal or in the Contract to be entered into, if the award is made on us, that this proposal is made without any connection with any other person, firm or party likewise submitting a proposal is in all respects for and in good faith, without collusion or fraud.

Thanking you, we remain,

Yours faithfully,

For and on behalf of Name

Date : 8/ Sep/2024 Printed Name : Printed Name

Place : XXX Designation : Desig

Please provide additional information of the Bidder

Business Address :

Country of Incorporation :

State/Province to be indicated :

Name of Principal Officer :

Address of Principal Officer :

Note: Bidders may note that no prescribed proforma has been enclosed for NESH/CSM/OT/PRANIT/1500-1310 [PKG E] Dated:14/06/2024Power of Attorney. Bidders may use their own proforma for furnishing the required information with the bid.

Note: Bidders may note that no prescribed proforma has been enclosed for NESH/CSM/OT/PRANIT/1500-1310 [PKG E] Dated:14/06/2024 Power of Attorney. Bidders may use their own proforma for furnishing the required information with the bid.

NESH/CSM/OT/PRANIT/1500-1310 [PKG E] Dated:14/06/2024 Attachment-1

Package:: Demolition & Re-construction of residential Quarters at 132 kV Salakati Substation under O&M ADD CAP 2019-24 [Package-E]

(Bid Security/Bid Guarantee)

Bidder’s Name and Address:( Sole Bidder) To,

Sr.GM(Contract & Material Department)

Name : Name Power Grid Corporation of India Ltd.,

Address : Add1 North Eastern Region

Add2 Dongtieh, Lower Nongrah

Lapalang, Shillong-793006 (Meghalaya)

Bid security has not been submitted as our firm is registered under Udyam Registeration. Valid Udyam Registeration Certificate certificate being submitted instead of Bid Security, so as to reach C&M Department of POWERGRID, Shillong before deadline for submission of Bid specified in SCC. The soft/scanned copy is uploaded through the portal.

Date : 8 Sep 2024 Printed Name : Printed Name

Place : XXX Designation : Desig

NESH/CSM/OT/PRANIT/1500-1310 [PKG E] Dated:14/06/2024 Attachment-2

Package: Demolition & Re-construction of residential Quarters at 132 kV Salakati Substation under O&M ADD CAP 2019-24 [Package-E]

(Power of Attorney)

Bidder’s Name and Address:( Sole Bidder) To:

Sr.GM(Contract & Material Department)

Name : Name Power Grid Corporation of India Ltd.,

Address : Add1 North Eastern Region

Add2 Dongtieh, Lower Nongrah

Lapalang, Shillong-793006 (Meghalaya)

We have enclosed copy of the power of attorney duly authorized by a Notary Public indicating that the person(s) signing the bid have the authority to sign the bid and thus that the bid is binding upon us during the full period of its validity.

Date : 8 Sep 2024 Printed Name : Printed Name

Place : XXX Designation : Desig

NESH/CSM/OT/PRANIT/1500-1310 [PKG E] Dated:14/06/2024 Attachment-3(QR)

Package : Demolition & Re-construction of residential Quarters at 132 kV Salakati Substation under O&M ADD CAP 2019-24 [Package-E]

(Qualifying Requirement Data)

Bidder’s Name and Address:( Sole Bidder) To:

Sr.GM(Contract & Material Department)

Name : Name Power Grid Corporation of India Ltd.,

Address : Add1 North Eastern Region

Add2 Dongtieh, Lower Nongrah

Lapalang, Shillong-793006 (Meghalaya)

As per Annexure-A (BDS) VOL I – QR

Date : 8 Sep 2024 Printed Name : Printed Name

Place : XXX Designation : Desig

NESH/CSM/OT/PRANIT/1500-1310 [PKG E] Dated:14/06/2024 Attachment-4

Package: Demolition & Re-construction of residential Quarters at 132 kV Salakati Substation under O&M ADD CAP 2019-24 [Package-E]

(Form of Certificate of Origin and Eligibility)

Bidder’s Name and Address:( Sole Bidder) To:

Sr.GM(Contract & Material Department)

Name : Name Power Grid Corporation of India Ltd.,

Address : Add1 North Eastern Region

Add2 Dongtieh, Lower Nongrah

Lapalang, Shillong-793006 (Meghalaya)

The following is list of our Sub-Contractors proposed to be engaged by us for the above work in the event of award on us. However, the overall responsibility for supervision, quality and timely execution of the contract shall remain with us. We shall be fully responsible for any acts and omission on the part of the above Sub-contractor or any persons engaged by them in connection with the above work.

Sl. No. Name & Address of Sub-Contractor Nature of Work

country. country.

Date : 8 Sep 2024 Printed Name : Printed Name

Place : XXX Designation : Desig

NESH/CSM/OT/PRANIT/1500-1310 [PKG E] Dated:14/06/2024 Attachment-4(A)

Packahge: Demolition & Re-construction of residential Quarters at 132 kV Salakati Substation under O&M ADD CAP 2019-24 [Package-E]

(List of Special Maintenance Tools & Tackles)

Bidder’s Name and Address:( Sole Bidder) To:

Sr.GM(Contract & Material Department)

Name : Name Power Grid Corporation of India Ltd.,

Address : Add1 North Eastern Region

Add2 Dongtieh, Lower Nongrah

Lapalang, Shillong-793006 (Meghalaya)

We are furnishing below the list of special maintenance tools & tackles for various equipment under the subject package. The prices for these tools & tackles are included in our lumpsum bid price. We further confirm that the list of special maintenance tools & tackles includes all the items specifically identified in your bidding documents as brought out below:

S.No. For Equipment Item Description Unit Quantity

Notwithstanding what is stated above, we further confirm that any additional special maintenance tools and tackles, required for the equipment under this package shall be furnished by us at no extra cost to the employer.

Date : 8 Sep 2024 Printed Name : Printed Name

Place : XXX Designation : Desig

NESH/CSM/OT/PRANIT/1500-1310 [PKG E] Dated:14/06/2024 Attachment-5

Package: Demolition & Re-construction of residential Quarters at 132 kV Salakati Substation under O&M ADD CAP 2019-24 [Package-E]

( Sub-contracted Items)

Bidder’s Name and Address:( Sole Bidder) To:

Sr.GM(Contract & Material Department)

Name : Name Power Grid Corporation of India Ltd.,

Address : Add1 North Eastern Region

Add2 Dongtieh, Lower Nongrah

Lapalang, Shillong-793006 (Meghalaya)

Sl. No. Item Description Quantity proposed to be bought/sub-contracted Details of the proposed sub-contractor/sub-vendor

Name Nationality

2. We hereby declare that we would not subcontract the erection portion of the contract withot prior approval of the Employer

3. In line with ITB Clause 9.3 (e), we intend to supply following items which are to be manufactured within Arunachal Pradesh

We futher declare that we would source material/services for atleast 30% of the Installation Price of Second /Services contract from within Arunachal Pradesh

Sl. No. Item Description Quantity proposed to be bought/ subcontracted Detail write up to engage local sub contractor/sub vendor

For additional write up, extra sheet may be attached to the bid.

Date : 8 Sep 2024 Printed Name : Printed Name

Place : XXX Designation : Desig

NESH/CSM/OT/PRANIT/1500-1310 [PKG E] Dated:14/06/2024

(Bought-out & Sub-contracted Items)

Sl. No. Item Description Quantity proposed to be bought/sub-contracted Details of the proposed sub-contractor/sub-vendor

Name Nationality

Date : 8 Sep 2024 Printed Name : Printed Name :

Place : XXX Designation : Designation :

NESH/CSM/OT/PRANIT/1500-1310 [PKG E] Dated:14/06/2024 Attachment-5(A)

Package: Demolition & Re-construction of residential Quarters at 132 kV Salakati Substation under O&M ADD CAP 2019-24 [Package-E]

(Items, Components, Raw Material, Services proposed to be sourced from Micro and Small Enterprises)

Bidder’s Name and Address:( Sole Bidder) To,

Sr.GM(Contract & Material Department)

Name : Name Power Grid Corporation of India Ltd.,

Address : Add1 North Eastern Region

Add2 Dongtieh, Lower Nongrah

Lapalang, Shillong-793006 (Meghalaya)

1. We hereby furnish the details of the items, components, raw material, services which we propose to buy/avail from Micro and Small Enterprises (MSEs) for the purpose of completion of works under the package

Sl. No. Item Description Quantity proposed to be bought/sub-contracted Name of Micro and Small Enterprises (MSEs)

Name & Address Category

We hereby furnish the details of the items/ sub-assemblies propose to supply from our own works (i.e. as direct transactions) in additiona to the supplies the same from other vendors (i.e. as Bought-out transactions) as detailed in the table given above.

Sl. No. Item Description Quantity proposed to be supplied Details of the plant from where supplies are proposed.

Name of Plant Address

2. The above is a list of items we propose to procure from MSEs. However, based on the situations during the execution of the contract, the above list may undergo changes. We hereby confirm that the details regarding actual procurement from MSEs carried out by us, as per the format provided at Section VI, Forms and Procedures, Volume-I of bidding documents, shall be submitted along with the bills for payment against supplies made/works done during execution of contract. .

Date : 8 Sep 2024 Printed Name : Printed Name

Place : XXX Designation : Desig

NESH/CSM/OT/PRANIT/1500-1310 [PKG E] Dated:14/06/2024 Attachment-5(A)

(Bought-out & Sub-contracted Items)

Sl. No. Item Description Quantity proposed to be bought/sub-contracted Details of the proposed sub-contractor/sub-vendor

Name Nationality

Date : 8 Sep 2024 Printed Name : Printed Name

Place : XXX Designation : Desig

NESH/CSM/OT/PRANIT/1500-1310 [PKG E] Dated:14/06/2024 Attachment-6

Package: Demolition & Re-construction of residential Quarters at 132 kV Salakati Substation under O&M ADD CAP 2019-24 [Package-E]

(Alternative, Deviations and Exceptions to the Provisions)

Bidder’s Name and Address:( Sole Bidder) To:

Sr.GM(Contract & Material Department)

Name : Name Power Grid Corporation of India Ltd.,

Address : Add1 North Eastern Region

Add2 Dongtieh, Lower Nongrah

Lapalang, Shillong-793006 (Meghalaya)

The bidder shall itemize any deviation from the Specifications included in his bid. Each item shall be listed (separate sheets may be used and enclosed with this Attachment) with the following information:

Sl. No. Reference clause in the Specifications Deviation Cost of withdrawal of the deviation

The above deviations and variations are exhaustive. We confirm that we shall withdraw the deviations proposed by us at the cost of withdrawal indicated in this attachment, failing which our bid may be rejected and Bid Security forfeited.

Date : 8 Sep 2024 Printed Name : Printed Name

Place : XXX Designation : Desig

NESH/CSM/OT/PRANIT/1500-1310 [PKG E] Dated:14/06/2024 Annexure I toAttachment-6

(Alternative, Deviations and Exceptions to the Provisions)

Sl. No. Reference clause in the Specifications Deviation Cost of withdrawal of the deviation

Date : 8 Sep 2024 Printed Name : Printed Name

Place : XXX Designation : Desig

NESH/CSM/OT/PRANIT/1500-1310 [PKG E] Dated:14/06/2024 Attachment-7

Package: Demolition & Re-construction of residential Quarters at 132 kV Salakati Substation under O&M ADD CAP 2019-24 [Package-E]

(Details of Alternative Bid)

Bidder’s Name and Address:( Sole Bidder) To:

Sr.GM(Contract & Material Department)

Name : Name Power Grid Corporation of India Ltd.,

Address : Add1 North Eastern Region

Add2 Dongtieh, Lower Nongrah

Lapalang, Shillong-793006 (Meghalaya)

No Alternative Bid

Date : 8 Sep 2024 Printed Name : Printed Name

Place : XXX Designation : Desig

NESH/CSM/OT/PRANIT/1500-1310 [PKG E] Dated:14/06/2024 Attachment-8

Package: Demolition & Re-construction of residential Quarters at 132 kV Salakati Substation under O&M ADD CAP 2019-24 [Package-E]

(Manufacturer's Authorization Form)

Bidder’s Name and Address:( Sole Bidder) To:

Sr.GM(Contract & Material Department)

Name : Name Power Grid Corporation of India Ltd.,

Address : Add1 North Eastern Region

Add2 Dongtieh, Lower Nongrah

Lapalang, Shillong-793006 (Meghalaya)

WE …….(insert name of the Manufacturer)…….. who are established and reputable manufacturers of ……..(insert name and/or description of the goods)……. having production facilities at ……..(insert address of factory)……. do hereby authorize ………(insert name & address of Bidder)……….. (hereinafter, the “Bidder”) to submit a bid, and subsequently negotiate and sign the Contract with you against IFB for …….(insert name of the package alongwith the project name)……….. including the above plant & equipment or other goods produced by us.

We hereby extend our full guarantee and warranty for the above specified goods offered supporting the supply by the Bidder against these Bidding Documents, and duly authorize said Bidder to act on our behalf in fulfilling these guarantee and warranty obligations. We also hereby declare that we and ……(insert name of the Bidder)………. have entered into a formal relationship in which, during the duration of the Contract (including warranty/defects liability). We, the Manufacturer or Producer, will make our technical and engineering staff fully available to the technical and engineering staff of the successful Bidder to assist that Bidder, on a reasonable and best effort basis, in the performance of all its obligations to the Purchaser under the Contract.

For and on behalf of the Manufacturer Signed: _______________________________________________________________ Date: __________________________________ In the capacity of …….. (insert title of position or other appropriate designation)…….. Date:.................... (Signature).......................……….. Place:................... (Printed Name)...............................…. (Designation)................……………........ (Common Seal).………............................

Note.:1. The letter of Undertaking should be on the letterhead of the Manufacturer and should be signed by a person competent and having Power of Attorney to legally bind the Manufacturer. It shall be included by the bidder in its bid. 2. Above undertaking shall be registered or notarized so as to be legally enforceable.

NESH/CSM/OT/PRANIT/1500-1310 [PKG E] Dated:14/06/2024 Attachment-9

Package: Demolition & Re-construction of residential Quarters at 132 kV Salakati Substation under O&M ADD CAP 2019-24 [Package-E]

(Work Completion Schedule)

Bidder’s Name and Address:( Sole Bidder) To:

Sr.GM(Contract & Material Department)

Name : Name Power Grid Corporation of India Ltd.,

Address : Add1 North Eastern Region

Add2 Dongtieh, Lower Nongrah

Lapalang, Shillong-793006 (Meghalaya)

We hereby declare that the following Work Completion Schedule shall be followed by us in furnishing and installation of the subject Package i.e., Package: Demolition & Re-construction of residential Quarters at 132 kV Salakati Substation under O&M ADD CAP 2019-24 [Package-E] for the period commencing from the effective date of Contract to us :

Sl. No. Description of Work Period in months from the effective date of Contract:

Nos. Unit Remarks

1 Mobilization at site

2 Source identification of Materials

3 Commencement of Work

4 Completion of Work

5 Overall Completion Schedule

Bidders to enclose a detailed network covering all the activities to be undertaken for completion of the project indicating key dates for various milestones for each phase constituent-wise.

Date : 8 Sep 2024 Printed Name : Printed Name

Place : XXX Designation : Desig

NESH/CSM/OT/PRANIT/1500-1310 [PKG E] Dated:14/06/2024 Attachment-10

Package: Demolition & Re-construction of residential Quarters at 132 kV Salakati Substation under O&M ADD CAP 2019-24 [Package-E]

(Defect Liability)

Bidder’s Name and Address:( Sole Bidder) To:

Sr.GM(Contract & Material Department)

Name Name Power Grid Corporation of India Ltd.,

Address : Add1 North Eastern Region

Add2 Dongtieh, Lower Nongrah

Lapalang, Shillong-793006 (Meghalaya)

We accept that the work executed by us in case of award shall be liable for Defect liability period as per SCC and GCC 40.0 reckoned from the date of Completion of works/taking over of the site under the contract. We, shall be responsible to make good and remedy at our own expense within such period, any defect which may develop or may be noticed before the expiry of Defect Liability Period and which arises from either: a) Any defective workmanship or b) An act of commission, of the Contractor during the defect liability period. We, shall make good the defects & damages immediately at our own cost to match the original specifications to the satisfaction of the Engineer-in-Charge.

Date : 8 Sep 2024 Printed Name : Printed Name

Place : XXX Designation : Desig

NESH/CSM/OT/PRANIT/1500-1310 [PKG E] Dated:14/06/2024 Attachment-11

Demolition & Re-construction of residential Quarters at 132 kV Salakati Substation under O&M ADD CAP 2019-24 [Package-E]

(Information regarding Ex-employees of POWERGRID in our Organisation)

Bidder’s Name and Address:( Sole Bidder) To:

Sr.GM(Contract & Material Department)

Name : Name Power Grid Corporation of India Ltd.,

Address : Add1 North Eastern Region

Add2 Dongtieh, Lower Nongrah

Lapalang, Shillong-793006 (Meghalaya)

We declare that we are aware of and have gone through the "Code of Business Conduct and Ethics for Senior Management Personnel" and "Code of Business Conduct and Ethics for Board Members" of POWERGRID (hereinafter referred to as the "Code of Conduct"). We further understand that as per the "Code of Conduct", Senior Management Personnel including Board Members, who have retired / resigned from POWERGRID, shall not accept any appointment or post, as detailed in the referred "Code of Conduct", within 1 year from the date of cessation of service / directorship unless approved by the Competent Authority.

Accordingly, We hereby furnish the details of ex-employees of POWERGRID who had retired/ resigned at the level of General Manager and above from POWERGRID and subsequently have been employed by us:

Sl. No. Name of the person with designation in POWERGRID Date of Retirement/ resignation from POWERGRID Date of joining and designation in our organisation

*In case the date of joining in the bidder's organization of such ex-employee is within 1 year from the date of retirement / resignation from POWERGRID, No Objection Certificate / approval from the Competent Authority must be furnished alongwith the bid or subsequent through clarification pursuant to ITB Clause 21.

In case of non-submission of No Objection Certificate / approval of the Competent Authority, as required, We understand that POWERGRID shall deal with such cases as per its Policy and Procedures in vogue, which may also result in rejection of our bid. We also confirm that POWERGRID shall be the sole judge in this regard.

We further declare that any misrepresentation or submission of false / forged documenmts / information in this regard shall be dealt with as per the provisions of the Integrity Pact and / or the Bidding Documents and / or POWERGRID's policy and procedure.

Date : 8 Sep 2024 Printed Name : Printed Name

Place : XXX Designation : Desig

1. "Code of Business Conduct and Ethics for Senior Management Personnel" and "Code of Business Conduct and Ethics for Board Members" are available on POWERGRID's website http://www.powergrid.in.

2. The information in similar format should be furnished for each partner of joint venture in case of joint venture bid.

3. In case bidder has furnished no details on ex-employees of POWERGRID or has left blank or has indicated '-' against the same, it shall be deemed that they have not employed any such person in their organization.

NESH/CSM/OT/PRANIT/1500-1310 [PKG E] Dated:14/06/2024 Attachment-12

Demolition & Re-construction of residential Quarters at 132 kV Salakati Substation under O&M ADD CAP 2019-24 [Package-E]

(Price Adjustment Data)

Bidder’s Name and Address (Sole Bidder): To:

Sr.GM(Contract & Material Department)

Name : Name Power Grid Corporation of India Ltd.,

Address : Add1 North Eastern Region

Add2 Dongtieh, Lower Nongrah

Lapalang, Shillong-793006 (Meghalaya)

We hereby confirm that the prices of Supply of Goods and Services offered will remain FIXED & FIRM during the performance of the contract and will not subject to any variation on any account..

Date : 8 Sep 2024 Printed Name : Printed Name

Place : XXX Designation : Desig

NESH/CSM/OT/PRANIT/1500-1310 [PKG E] Dated:14/06/2024 Attachment-13

Package: Demolition & Re-construction of residential Quarters at 132 kV Salakati Substation under O&M ADD CAP 2019-24 [Package-E]

(Declaration regarding Social Accountability)

Bidder’s Name and Address:( Sole Bidder) To:

Contract & Material Department

Name : Name Power Grid Corporation of India Ltd.,

Address : Add1 North Eastern Region

Add2 Dongkteih, Lower Nongrah

Lapalang, Shillong-793006 (Meghalaya)

We conform that we stand committed to comply to all requirements of Social Accountability Standards i.e., SA8000 (latest Standard available at www.sa-intl.org) and maintain the necessary records.

Date : 8 Sep 2024 Printed Name : Printed Name

Place : XXX Designation : Desig

NESH/CSM/OT/PRANIT/1500-1310 [PKG E] Dated:14/06/2024 Attachment-14

Package: Demolition & Re-construction of residential Quarters at 132 kV Salakati Substation under O&M ADD CAP 2019-24 [Package-E]

Bidder’s Name and Address:( Sole Bidder) To:

Sr.GM(Contract & Material Department)

Name : Name Power Grid Corporation of India Ltd.,

Address : Add1 North Eastern Region

Add2 Dongtieh, Lower Nongrah

Lapalang, Shillong-793006 (Meghalaya)

Integrity Pact format is attached in 09-Section - VI Forms and Proceedures

Date : 8 Sep 2024 Printed Name : Printed Name

Place : XXX Designation : Desig

NESH/CSM/OT/PRANIT/1500-1310 [PKG E] Dated:14/06/2024 Attachment-15

Package: Demolition & Re-construction of residential Quarters at 132 kV Salakati Substation under O&M ADD CAP 2019-24 [Package-E]

Option for Initial Advance (either Interest Bearing Initial Advance or No Initial Advance) and Information for E – payment, PF details and declaration for Micro/Small and Medium Enterprise

Bidder’s Name and Address:( Sole Bidder) To:

Sr.GM(Contract & Material Department)

Name : Name Power Grid Corporation of India Ltd.,

Address : Add1 North Eastern Region

Add2 Dongtieh, Lower Nongrah

Lapalang, Shillong-793006 (Meghalaya)

I We have read the provisions in the Bidding Documents regarding furnishing the option for advance payment. Accordingly, as per ITB Clause 9.3 as provided in Section BDS, Section III, Vol.-I of the Bidding Documents, we hereby confirm to opt the following:

Interest Bearing Initial Advance

Supply Portion: NOT APPLICABLE No

Services Portion: NOT APPLICABLE No

II Contract performance Guarantee will be submitted: Bank Guarante

(Select from drop down list)

III We are furnishing the following details of Statutory Registration Numbers and details of Bank for electronic payment.

1 Name of the Supplier/ Contractor in whose favour payment is to be made

2 Address with PIN Code and State

Registered Office:

Correspondence Address:

3. (a) Status – Company/others

[Declaration of Micro/ Small/ Medium Enterprise under Micro/ Small & Medium Enterprises Development Act 2006, if applicable]

3. (b) Are you a MSE owned by SC/ST* entrepreneurs in line with Public Procurement Policy for Micro and Small Enterprises (MSEs) order 2012 including subsequent amendment/notification/order [Indicate Yes / No]

Note: Documentary evidence is to be attached. Please refer remarks at the end of the attachment.

3. (c) If 3(b) is 'Yes' please mention whether you are (Proprietary MSE/ Partnership MSE/ Private Limited Company) owned by SC/ST entrepreneurs

3. (d) Are you a MSE owned by women in line with Public Procurement Policy for Micro and Small Enterprises (MSEs) order 2012, Public Procurement Policy for Micro and Small Enterprises (MSEs) Amendment Order 2018 including subsequent amendment/notification/order [Indicate Yes / No]

Note: Documentary evidence is to be attached.

4 Permanent Account (PAN) No.

5 GSTIN Numbers

I. GSTIN in the Sates/UT from where the supply of goods take place

Name of the States/UT GSTIN number

II. GSTIN in the States/UT where the supply of services take place (states where sites under the subject package is situated)

Name of the States/UT GSTIN number

9 PF Registration No. of the Company

10 PF Regional Office covered (with Address)

11 Name of Contact Person

12 Contact Details

13 Bank Details for Electronic Payment

Name of the Bank:

Address of Branch:

Type of Account: Saving Account

14 9 digit MICR code printed at bottom in middle, next to cheque no.

15 IFSC (for RTGS)/NEFT Code (to be obtained from the Bank) Sample Cancelled Cheque to be enclosed

We hereby declare that the above information are true and correct and we agree that the payment on account of this Contract, in the event of award, be made in the above account maintained in the above mentioned Bank.

Remarks: The definition of MSEs owned by SC/ST is as given under:

a. In case of proprietary MSE, proprietor(s) shall be SC/ST.

b. In case of partnership MSE, the SC/ST partners shall be holding at least 51% shares in the unit.

c. In case of Private Limited Companies, at least 51% share shall be held by SC/ST promoters.

Documentary Evidence: Please provide scanned copy(ies) of the SC/ST certificate(s) issued by District Authority as applicable for SC/ST MSE category as per (a), (b) or (c) above.

Date : 8 Sep 2024 Printed Name : Printed Name

Place : XXX Designation : Desig

NESH/CSM/OT/PRANIT/1500-1310 [PKG E] Dated:14/06/2024 Attachment-16

Package: Demolition & Re-construction of residential Quarters at 132 kV Salakati Substation under O&M ADD CAP 2019-24 [Package-E]

(Additional Information)

Bidder’s Name and Address:( Sole Bidder) To:

Sr.GM(Contract & Material Department)

Name : Name Power Grid Corporation of India Ltd.,

Address : Add1 North Eastern Region

Add2 Dongtieh, Lower Nongrah

Lapalang, Shillong-793006 (Meghalaya)

In support of the additional information required, we furnish herewith our data/details/documents etc., alongwith other information, as follows (the stipulations have been reproduced in italics for ready reference):

0.0 The Bidder shall furnish

A certificate from their Banker(s) (as per prescribed formats in Section-VI: Sample Forms and Procedures) indicating various fund based/non fund based limits sanctioned to the Bidder and the extent of utilization as on date. Such certificate should have been issued not earlier than three months prior to the date of bid opening. Wherever necessary the Employer may make queries with the Bidders’ Bankers.

1.1 In accordance with 1.0, certificate(s) from banker as per requisite format, indicating various fund based/non fund based limits sanctioned to the bidder or each member of the joint venture and the extent of utilization as on date is/are enclosed, as per the following details:

Name of the Bidder (Sole Bidder) Name

Name of the Banker by whom certificate issued

Date of certificate (should not be earlier than 3 months prior to date of bid opening)

Whether fund based/non fund based limits are indicated in the certificate

Whether extent of utilization is indicated in the certificate

1.2 The Bidder should accordingly also provide the following information/documents

(i) Details of Banker:

Address of Banker

Contact Name and Title

(ii) As per para 1.0, Authorizatio Letter(s) from the bidder (in case of JV bidder, from all the partners) addressed to the Banker(s), authorizing POWERGRID to seek queries about the bidder with the Banker(s) and advising the Banker(s) to reply the same promptly, is/ are enclosed as per following details:

Sl. No. Lette Ref. Date Addressed to (name of the Bank)

0.0 Litigation History

The bidder should provide detailed information on any litigation or arbitration arising out of contracts completed or under execution by it over the last five years. A consistent history of awards involving litigation against the Bidder or any partner of JV may result in rejection of Bid.

2.1 Details of litigation history resulting from Contracts completed or under execution by the bidder over the last five years

Year Name of client, cause of litigation/arbitration and matter in dispute Details of Contract and date Award for or against the bidder Disputed amount

0.0 Details regarding previous transgressions of Integrity Pact

The bidder should provide detailed information on any transgression of Integrity Pact that occurred in the last 10 years with any other Public Sector Undertakig or Government Department or any other Company, in any country.

3.1 Details regarding previous transgressions of Integrity Pact that occurred in the last 10 years

Year Name of Client Details of Transgression of Integrity Pact by the Bidder

0.0 OTHER INFORMATION

4.1 Current Contract Commitments of works in progress

Bidders should provide information on their current commitments on all contracts that have been awarded, or for which a letter of intent or acceptance has been received, or for contracts approaching completion, but for which an unqualified, full completion certificate has yet to be issued.

Details of Contract Value of outstanding work (Rs.) Estimated completion date

4.2 Financial Data:

Details Actual (Previous five years) Projection for next five years

Total Liability

Current Liability

Profit before taxes

Profit after taxes

4.3 Provident Fund Code Number of the Bidder:

Date : 8 Sep 2024 Printed Name : Printed Name

Place : XXX Designation : Desig

NESH/CSM/OT/PRANIT/1500-1310 [PKG E] Dated:14/06/2024 Attachment-17

Package: Demolition & Re-construction of residential Quarters at 132 kV Salakati Substation under O&M ADD CAP 2019-24 [Package-E]

(Declaration for tax exemptions, reductions, allowances or benefits)

Bidder’s Name and Address:( Sole Bidder) To:

Sr.GM(Contract & Material Department)

Name : Name Power Grid Corporation of India Ltd.,

Address : Add1 North Eastern Region

Add2 Dongtieh, Lower Nongrah

Lapalang, Shillong-793006 (Meghalaya)

1 We confirm that we are solely responsible for obtaining following tax exemptions, reductions, allowances or benefits in respect of supplies under the subject package, in case of award. We further confirm that we have considered the same in our bid thereby passing on the benefit to POWERGRID while quoting our prices. In case of our failure to receive such benefits, partly or fully, for any reason whatsoever, the Employer will not compensate us.

2 We are furnishing the following information required by the Employer for issue of requisite certificate if and as permitted in terms of the applicable Govt. of India policies/procedures (in case of award):

Applicable Act, Notification No. and Clause Ref. No. Sl. No. Description of item on which applicable Country of origin Remarks, if any

(The requirements listed above are as per current Notification of Govt. of India indicated above. These may be modified, if necessary, in terms of the Notifications.)

Date : 8 Sep 2024 Printed Name : Printed Name

Place : XXX Designation : Desig

NESH/CSM/OT/PRANIT/1500-1310 [PKG E] Dated:14/06/2024 Attachment-17

Package: Demolition & Re-construction of residential Quarters at 132 kV Salakati Substation under O&M ADD CAP 2019-24 [Package-E]

(Information regarding Ex-employees of POWERGRID in our Organisation)

Name(s) and Addresse(s) of other partner(s) To:

Sr.GM(Contract & Material Department)

Name : …… ……. …….. …… ……. …….. Power Grid Corporation of India Ltd.,

Address : …… ……. …….. …… ……. …….. North Eastern Region

…… ……. …….. …… ……. …….. Dongtieh, Lower Nongrah

We hereby furnish the details of ex-employees of POWERGRID who had retired/ resigned at the level of General Manager and above from POWERGRID and subsequently have been employed by us:

Sl. No. Name of the person with designation in POWERGRID Date of Retirement/ resignation from POWERGRID Date of joining and designation in our organisation

Date : 8 Sep 2024 Printed Name : Printed Name :

Place : XXX Designation : Designation :

NESH/CSM/OT/PRANIT/1500-1310 [PKG E] Dated:14/06/2024 Attachment-17

Package: Demolition & Re-construction of residential Quarters at 132 kV Salakati Substation under O&M ADD CAP 2019-24 [Package-E]

(Information regarding Ex-employees of POWERGRID in our Organisation)

Name(s) and Addresse(s) of other partner(s) To:

Sr.GM(Contract & Material Department)

Name : Power Grid Corporation of India Ltd.,

Address : North Eastern Region

Dongtieh, Lower Nongrah

We hereby furnish the details of ex-employees of POWERGRID who had retired/ resigned at the level of General Manager and above from POWERGRID and subsequently have been employed by us:

Sl. No. Name of the person with designation in POWERGRID Date of Retirement/ resignation from POWERGRID Date of joining and designation in our organisation

Date : 8 Sep 2024 Printed Name : Printed Name :

Place : XXX Designation : Designation :

NESH/CSM/OT/PRANIT/1500-1310 [PKG E] Dated:14/06/2024 Attachment-18

Package: Demolition & Re-construction of residential Quarters at 132 kV Salakati Substation under O&M ADD CAP 2019-24 [Package-E]

Bidder’s Name and Address:( Sole Bidder) To:

Sr.GM(Contract & Material Department)

Name : Name Power Grid Corporation of India Ltd.,

Address : Add1 North Eastern Region

Add2 Dongtieh, Lower Nongrah

Lapalang, Shillong-793006 (Meghalaya)

As per SCC Sl No. 20.0

Date : Printed Name : Printed Name

Place : XXX Designation : Desig

NESH/CSM/OT/PRANIT/1500-1310 [PKG E] Dated:14/06/2024 Attachment-19

Demolition & Re-construction of residential Quarters at 132 kV Salakati Substation under O&M ADD CAP 2019-24 [Package-E]

Bidder’s Name and Address:( Sole Bidder) To:

Sr.GM(Contract & Material Department)

Name : Name Power Grid Corporation of India Ltd.,

Address : Add1 North Eastern Region

Add2 Dongtieh, Lower Nongrah

Lapalang, Shillong-793006 (Meghalaya)

Further, we hereby confirm that except as mentioned in the Attachment – 6 (Alternative, Deviations and Exceptions to the Provisions) hereof forming part of our First Envelope :

Date : 8 Sep 2024 Printed Name : Printed Name

Place : XXX Designation : Desig

NESH/CSM/OT/PRANIT/1500-1310 [PKG E] Dated:14/06/2024 Attachment-20

Demolition & Re-construction of residential Quarters at 132 kV Salakati Substation under O&M ADD CAP 2019-24 [Package-E]

(Public Procurment Policy PPP-MII Certification)

Bidder’s Name and Address:( Sole Bidder) To:

Sr.GM(Contract & Material Department)

Name : Name Power Grid Corporation of India Ltd.,

Address : Add1 North Eastern Region

Add2 Dongtieh, Lower Nongrah

Lapalang, Shillong-793006 (Meghalaya)

Affidavit of Self certification regarding Minimum Local Content in line with PPP-MII order, if applicable (submission of Hard Copy in ‘Original’), to be submitted on a non-judicial stamp paper of Rs. 100/. In line with the PPP-MII order, the bidder shall submit the Affidavit of self-certification, in original, certifying that the item offered meets the Minimum Local Content and shall give details of the location(s) at which value addition is made, as prescribed in the PPP-MII Order 2017, on a non-judicial stamp paper of Rs. 100/-. Further, false declaration regarding Local Content by the bidder shall be a transgression of Integrity Pact and action shall be taken in line with provisions of the Integrity pact and in line with the provisions of the PPP-MII Order.

Format enclosed as per Attachment 23_Affidavit for self-certification_PPP - MII Order

Date : 8 Sep 2024 Printed Name : Printed Name

Place : XXX Designation : Desig

NESH/CSM/OT/PRANIT/1500-1310 [PKG E] Dated:14/06/2024 Attachment-21

Demolition & Re-construction of residential Quarters at 132 kV Salakati Substation under O&M ADD CAP 2019-24 [Package-E]

(Public Procurment Policy PPP-MII Auditor Certification)

Bidder’s Name and Address:( Sole Bidder) To:

Sr.GM(Contract & Material Department)

Name : Name Power Grid Corporation of India Ltd.,

Address : Add1 North Eastern Region

Add2 Dongtieh, Lower Nongrah

Lapalang, Shillong-793006 (Meghalaya)

Certificate from statutory auditor or cost auditor of the company (in the case of companies) or from a practicing cost accountant or practicing chartered accountant (in respect of suppliers other than companies) giving the percentage of Local Content, in line with PPP-MII order, if applicable (submission of Hard Copy in ‘Original’) to be submitted on the letter head of the auditor/ cost accountant/chartered accountant In line with the PPP-MII order, the bidder shall submit certificate from statutory auditor or cost auditor of the company (in the case of companies) or from a practicing cost accountant or practicing chartered accountant (in respect of suppliers other than companies) giving the percentage of Local Content, if applicable, on the letter head of the auditor/chartered accountant. Further, false declaration regarding Local Content in the aforesaid certificate submitted by the bidder shall be a transgression of Integrity Pact and action shall be taken in line with provisions of the Integrity pact and in line with the provisions of the PPP-MII Order. [ APPLICABLE for PAckages having CE > 10 Crore]

Date : 8 Sep 2024 Printed Name : Printed Name

Place : XXX Designation : Desig

NESH/CSM/OT/PRANIT/1500-1310 [PKG E] Dated:14/06/2024 Attachment-22

Demolition & Re-construction of residential Quarters at 132 kV Salakati Substation under O&M ADD CAP 2019-24 [Package-E]

(Compliance of DMI&SP policy)

Bidder’s Name and Address:( Sole Bidder) To:

Sr.GM(Contract & Material Department)

Name : Name Power Grid Corporation of India Ltd.,

Address : Add1 North Eastern Region

Add2 Dongtieh, Lower Nongrah

Lapalang, Shillong-793006 (Meghalaya)

Vide Notification dated 8th May 2017 and its revision dated 29th May 2019 by Ministry of Steel has published “Policy for providing preference to Domestically Manufactured Iron & Steel Products in Government Procurement” (hereinafter DMI&SP policy). I declare that I shall comply with the guidelines specified in the policy, including subsequent amendments/modifications, if any. Further, Violation to minimum prescribed domestic value addition or misrepresentation of facts by the bidder/contractor in this regard shall be dealt in line with provisions of the Integrity Pact.

Format enclosed as per Attachment 22_Compliance of DMI&SP policy

Date : 8 Sep 2024 Printed Name : Printed Name

Place : XXX Designation : Desig

NESH/CSM/OT/PRANIT/1500-1310 [PKG E] Dated:14/06/2024 Attachment-23

Demolition & Re-construction of residential Quarters at 132 kV Salakati Substation under O&M ADD CAP 2019-24 [Package-E]

(Code of Integrity for Public Procurement )

Bidder’s Name and Address:( Sole Bidder) To:

Sr.GM(Contract & Material Department)

Name : Name Power Grid Corporation of India Ltd.,

Address : Add1 North Eastern Region

Add2 Dongtieh, Lower Nongrah

Lapalang, Shillong-793006 (Meghalaya)

I Declare that I shall abide by Code of Integrity for Public Procurement in registration applications and in bid documents. In case of any transgression of this code, the bidder's name is not only liable to be removed from the list of registered suppliers, but it would be liable for other punitive actions such as cancellation of contracts, banning and blacklisting or action in Competition Commission of India, and so on.

Date : 8 Sep 2024 Printed Name : Printed Name

Place : XXX Designation : Desig

NESH/CSM/OT/PRANIT/1500-1310 [PKG E] Dated:14/06/2024 Attachment

Demolition & Re-construction of residential Quarters at 132 kV Salakati Substation under O&M ADD CAP 2019-24 [Package-E]

Bidder’s Name and Address:( Sole Bidder) To,

Sr.GM(Contract & Material Department)

Name : Name Power Grid Corporation of India Ltd.,

Address : Add1 North Eastern Region

Add2 Dongtieh, Lower Nongrah

Lapalang, Shillong-793006 (Meghalaya)

Sl. No. Item Description Reference Declaration (Strike out whichever is not applicable)

1 Bid Guarantee enclosed in separate sealed envelop (one original plus two copies) & submitted in physical form As per ITB Clause 9.1 (b) (ii)

2 Power of Attorney Submitted Attachment-2, BPS, Vol-IB

3 List of Subcontractors schedule fillid in Attachment-5, BPS, Vol-IB

4 Commercial deviation schedule filled in Attachment-6, BPS, Vol-IB

5 Technical deviation schedule filled in Attachment-6, BPS, Vol-IB

6 Work schedule filled in Attachment-9, BPS, Vol-IB

7 Schedule on information regarding Ex-employees of POWERGRID in the firm filled in Attachment-11, BPS, Vol-IB

8 Declaration Regarding Social Accountability Attachment-13, BPS, Vol-IB

9 Intergity Pact Attachment-14, BPS, Vol-IB

10 Additional information included with this Proposal Attachment-16, BPS, Vol-IB

11 (Public Procurment Policy PPP-MII Self Certification) Minimum Local Content Attachment-20, BPS, Vol-IB

12 (Public Procurment Policy PPP-MII Auditor Certification) Minimum Local Content Attachment-21, BPS, Vol-IB

13 Undertaking by the bidder regarding Compliance of DMI&SP policy Attachment-22, BPS, Vol-IB

14 Code of Integrity for Public Procurement ( CIPP) Attachment-23, BPS, Vol-IB

Date : 8 Sep 2024 Printed Name : Printed Name

Place : XXX Designation : Desig