WORK-SCHEDULE: Upgradation of power supply system including improvement of illumination with emergency light under TS-1 and HT section in DDU.

A-NS FOR ALL ITEMS (PART A.) Under T S-1

Supply of XLPE LT Aluminium cable of size 4 core x 185 Sq. mm. multistained armoured ISI approved suitable to 1100 volt grade Make: Paragon, Havells,Nicco, Universal.

Supply of XLPE LT Aluminium cable of size 4 core x 240 Sq. mm. multistained armoured ISI approved suitable to 1100 volt grade Make: Paragon, Havells,Nicco, Universal.

Supply of 3 Core X 120 sq. mm HT Cable duly ISI approved of reputed make suitable for 11 KV. Make - Havells, Gloster, Nicco, Polycab

Transportation of above cable from store to site. (supplied by Railway)

Supply of HDPE Pipe, Laying and drawing of HT / LT cables through Pressure machanism inside the pipe and proper connection to junction Box as per site requirement in all respect ( Size of cable HT / LT 3 core / 4 core from 50 sq mm to 240 sq. mm ), thickness of HDPE 05 should not be less than 06 mm. HDPE will be laid down in the pucca Trench as per site requirement of pucca trench as well as HDPE should be confirming to IS 14333 1966 or latest.Make of Pipe -Asian, Appollo pipes, Vectus, Utakarsh HDPE pipe , pressure rating at 30 Deg. centigdade : PN 6 , confirmity to IS : 4998 or latest. Thickness of pipe min. 5.3 mm and max. 5.9 mm ISIMarked , CM/L : 7395589, Material Grade : PE 100.

supply, Fixing, testing and commissioning of 11 KV indoor type heat shrinkable type cable end sealing box suitable to 3 x50X 70/ 95/ 120 sq.mm duly ISI approved complete in all respect.Make - Raychem, RPEG, Renson.

Supply,fixing,testing and commissioning of 11 KV Outdoor type heat shrinkable type cable end sealing box suitable to 3 x 185/150/120 Sq. mm. duly ISI approved complete in all respect. As per item code of DENSON. Make -DENSON / REYCHEM or RPG.

Supply of Thermoplastic Cable Junction Boxes IP 65 with metric knockouts for cable entry of size maximum upto 240 Sq mm , Size of Jn. Box : 300mm x600 mm x 170 mm , Cat. No. with terminals K 2404 ( 4 Terminals ) . Make - HENSEL or equivalent .

Fixing, testing and commissioning of above junction box..

Supply,fixing,testing and commissioning of triple pole GOS suitable to operated on 3 Phase 11 kv AC supply of 400 Amp. Cap. 4 insulator type with DO fuse unit and operating rod with locking arrangement etc. ISI approved, Make : Rastriya Electrical & Engg, National, Jaipuria Brothers.

Supply, Installation, testing and commissioning of 11 KV lightening arrestor as per 11 spec. No:- CEE/LA/062-11-88. each set consists of 3 nos. of lighting arrestor confirming to IEC-99- 4/199/standard and IS: 3070 part-1(1985). Make: Rashtriya Electrical & Engg, Jaipuriya Brothers Electrical Pvt Ltd, Global Industries.

Supply, and erection of Earthing with 50 mm Dia. 3 mtr. Length GI Pipe, B-Class as 12 per IS:3043-1987, Confirming to IS :1239 or latest complete with earth box including connection from earth Electrode to MDB/SDB/Poles with 8 SWG GI Wire. Make of Pipe : TATA, JINDAL Surya,Bhushan with latest Ammendment and Technical Specifications.

Installation , connection, testing and ommissioning of transformer inluding plinth constrution alongwith constrution of ironsed struture with metal & transparent sheet top Cover and MS grill structure duly painted at four sides of transformer.(Transformer Supply By RLY.)

Supply, fixing, testing and commissioning of 11 KV HT floor mounted indoor type VCB panel type UMV vertical isolation and horizontal draw out type 400 Amp /250 MVA , 3 phase 14 comprisioning of 3 nos. one for incoming and two nos. for outging 400 Amp 11 KV 250 MVA VCB with CT ratio 100/50/5A PT 11 KV/110 volt auxillary relay , tip relay, overcurrent relay, eath fault relay, voltmeter, ammeter, selector swith, copper busbar 630 Amp capacity (1 set) complete in all respect make- Siemens, areva, L&t

Supply of 4 pole ACB fixed Mounting Design with Microprocessor based trip unit , 3WL 1108 Type with over load protection, short circuit protection and Earth fault protection for three phase and wire system. Rated current 800 Amp Make - Anchor, Havells, Siemens, C&S.

Fixing, testing and commissioning of 4 pole ACB with all protection and removal of existing OCB.

Design, fabrication, installation, testing & commissioning of supply of Cubical LT distribution Board/Panel fabricated ((minimum size length 3.7 mtr X Height 2.15 mtr X Thickness 1.0 mtr.) with 14 SWG cold rolled steel sheet supported on suitable MS angle /Channel frame welded/Screwed/nuts-bolts including equiped, fitted and connected to feeders /bus bars with ACB three pole 800 Amp, breaking capacity 50 KA -02 nos, COS four pole 1000 Amp. - 2 nos., MCCB three pole 320 amp , breaking capacity 36 KA - 02 nos, MCCB three pole 250 amp, breaking capacity 36 KA - 06 nos, MCCB three pole 125 amp. breaking capacity - 35 KA - 04 nos, MCCB three pole 80 amp. 17 breaking capacity 35 KA - 04 nos, multi function energy meter -01 no, three phase ammeter - 16 nos, CT ratio 1000/5 Amp. - 03 nos, CT - 400/5 amp - 06 nos, CT- 300/5 amp -18 nos & CT - 200/5 Amp - 24 nos, LED indication lamp for RYB phase -17 set (51 nos.) copper bus bar etc. detail as per annexure, A: The pedestal of angle iron frame shall be secured on floor by suitable grounting bolt and nuts. Each cubical of the panel shall have independent front opening of individual ACB, COS and MCCB and additional opening as per requirement . The panel shall have spray painted with one coat of red oxide as primer and two coats of super enamel paints. Nomencalature of each cubical shall be indicated on Al. foil (by screen priming process) duly revetted to front cover of cubical. Material which is required in fabrication , installation , testing , commissioning will be supplied by contactor. work will be done as per instruction of site in -charge.

Transportation of above Rail Pole from PWI/store to site.

Supply( except rail pole), fabrication, & erection of 'H' Pole structure bracing with angle iron 50 X 50 X 6 mm & 75 X 40 X 6 mm channel nut bolt, rail pole length exceeding 10 m but not exceeding 13 mtr direct in ground including excavation refilling with cement concrete 1:3:6 ( Cement, concourse sand, 40 mm graded stone nominal size) made of foundation 20 mm X 20 mm continued upto 30 cm above ground level etc as per required.

Fabrication and fixing of MS tray 18" (0.45 mtrs.) wide made of MS angle of size 65x65x6 mm on both sides and MS Flat 18" wide made of size 40x6 mm. welded at a distance of 12" (0.30 mtrs.)

"Supply, replacement, fixing, testing, connecting and commissioning of Inverter LED batten with square profile and poly carbonate /Extruded Aluminimum channel. Lithium Ion battery with charging time 8 hours-10 hours and back uptime upto 3 to 4 hours energy efficient luminaries complete with all accessories of capacity 20 watt, 4 feet length, LED lamps with suitable current control driver circuit ,suitable for surface/recessed mounting as per 1S:10322. LED Luminaries:-(1) 'A complete LED lighting unit consisting of a light source and driver together with parts of distribute light,to position and protect the light source,and to connect the light source to a branch circuit. The light source itself may be an LED array and LED module, or an LED lamp. (2):-Supplied LED luminaries shall confirm to IS:16101(2012) IS :16106(2012).Light Source(LED) in the Luminaries should be of make:- (1):-NICHIA/ CREE/OSRAM/ SEOUL/ PHILIPS/LUMILEDS /LEDNIUM. (2):-LEDs to S:16105(2012).1S:16108(2012),IEC:62471.1.Input operating voltage :-105-295 V IAC.2:-Normal Voltage- 220V AC.3 Driver type: constant current driver with short circuit iprotection(For tube light).4.Control of distribution:-Full cut off.5.Drive component :Industrial grade only .6 Efficiency of 21 driver electronic:>= 85% (For tube light).7.Colour temperature:5000- 6500K(For tube light).8.Colour rendering index(CRI):>75(For tube light).9.Ingress protection :IP-20.10.Lumen output: >=100 lumens/[email protected] drive current(For tubelight).11.Power factor:->0.90(For tube light). 12.Total harmonics distrotion(THD):-<20%(For itube light).13.Lamp cover :Acrylic cover which does not result in loss of lumens. 14.Finishing:Power coated /Anodized.15.Secondry optics:poly corbonate reflector/ poly carbonate lens.16.Construction of housing: extruded aluminum / CRCA / Pressure die cast aluminum.17.Mounting :Suitable for surface mounting/recessed mounting.18.Certificate:Firm to submit LM80(In respect of LED used)& LM79(Inrespect of luminare used) test certificate from National/International accredited Laboratory and OEM certificate for complience of BIS/IEC.19.Warranty:Firm to submitiwarranty certificate for five year along with the supply.All fittings should be embossed/sticker withimanufacturing date and warranty details at time of supply.20.The weight of fixture should be standard for better heat resistance of LED PCB. All fittings shall be fitted as surfaceimounting/recessed mounting with twisted twin flexible cord of minimum size 16/0.2 mm copper conductor as per relevant technical specification. Material prameters must remain unchanged during entire warranty priod. Inspection by- RITES."

"Supply, replacement, fixing, testing, connecting and commissioning of 45 Watt or above LED inverter street lights fittings with PDC housing, IP 66 and inbuilt battery backup with auto ON/OFF and dimming option(Dimming 50% on battery backup) and backup of upto 3 to 4 hrs. LED Luminaries:-(1) A complete LED lighting unit consisting of a light source and driver together with parts of distribute lights,to position and protect the light source,and to connect the light source to a branch circuit.The light source itself may be an LED array and LED module, oan LED lamp. (2):- Supplied LED luminaries shall confirm toIS: IS:16101(2012) IS :16106(2012).Light Source(LED) in the Luminaries should be of make:- (1):-NICHIA/ CREE/OSRAM/ SEOUL/PHILIPS/LUMILEDS /LEDNIUM. (2):- LEDs to 1S:16105(2012)1S:10322.1S:16108(2012),1S:10322,IEC:6247T1yp.e LED:- High power LED,SMD(Surface Mounting device).1.Input operating voltage :-105-295 V AC.2:- Normal Voltage- 220V AC,3.Driver type: constant current driver with short circuit protection. 4 LED life:- >50000 burning hours .5.Depreciation:- 30% max.after 50000 burning hours.6.Control of distribution:-Full cut off. 7.Surge protection:4KV (internal)+10KV(External Surge protection device).8.Drive component 22 :Industrial grade only.9.Efficiency of driver electronic: > 5%.10.Beam angle:>=140 degree along with road and &>=80 degree across the road.11.Colour temperature:5000-6500K.12.Colour rendering index(CRI):>=75.13.Ingress protection :IP-66.14.Lumen output: >120 lumens/watt.15.Power factor:>;0.95. 16.Total hormonics distrotion(THD):-&It;15%.17.Lamp cover :Toughened glass or UV stabilsed poly carbonate. 18.Finishing:Power coated /Anodized.19.Secondry optics:poly corbonate reflector/ poly carbonates lens.20.Construction of housing: extruded aluminum/CRCA/Pressure die cast aluminum.21.Mounting:Suitable for existing pole/Truss/Lantern mounted.22.Certificate:Firm to submit LM80(In respect of LED used)& LM79(In respect of luminare used) test certificate from National/International accredited Laboratory and OEM certificate for compliance of IBIS/IEC.23.Warranty:Firm to submit warranty certificate for five year along with the supply. All fittings should be embossed/sticker with manufacturing date and warranty details at time of supply.20.The weight of fixture should be standard for better heat resistance of LED PCB.ALll fittings shall be fitted with new suitable bend/elbow with clamp and proper nut and bolt and connection with itwisted twin flexible cord of minimum size 16/1 mm copper conductor as per relevant technical specification. Materials prameters must remain unchanged during entire warranty period.Inspection by-RITES"

Concealed Wiring of main from main distribution board to sub board in heavy gauge PVC conduit Pipe as per IS : 9537 with PVC multistrand copper conductor of size 2 x 2.5 sqmm in voltagegrade 1100 volt as per IS: 694 with ECC of 1/18 SWG copper wire, make of wire : Finolex, Plaza, Polycab,Havells.

Concealed wiring of main from main distribution board to sub board in heavy guage 24 PVC conduit pipe as per IS:9537 with PVC multistrand copper conductor of size 2 x 4 sqmm in voltage grade 1100 volt as per IS:694 with ECC of 1/18 SWG copper wire, make of wire: Finolex, Plaza , Polycab,Havells.

Supply, fixing, testing and commissioning of LED Street light Luminaires Wattage - 60 , 6500 K pressure Die - Cast Aluminium Housing with heat resistant Toughened Glass and IP 66 protection. Make - Philips, Bajaj, Cromptom, C&S.

Supply, fixing, connection, testing and commissioning of LED fitting indoor type , Lumen efficiency 100 lumen/watt ,output system wattage 42W (+10%, 5%) with IP 65 or better 26 protection water proof surface/suspendedmounting suitable for operation on 140VA 270V AC supply, LED used in fittings should be of make : NICHIA/OSRAM/SEOUL/CREE/PHILIPS LIMITEDS/LEDNIUM with warranty period of 5 yrs from date of commissioning or 6 yrs from date of supply whichever is earlier complete with testing arrangement. Make : Bajaj, Philips, Havells.

Supply of Automatic Transfer Switch 3 Phase , 125 Amp 4 Pole . Make -Havells, Indoasian.

Concealed Wiring of Light Point/Fan/Exhaust/ Call Bell point fan point in heavy gauge 28 PVC conduit pipe as per IS 9537 with PVC insulated single core 1.5 sqmm multistrand copper conductor wire in voltage grade 1100 volt as per IS 694 with ECC of 1/18 SWG copper wire. Make : Polycab, Anchor, Finolex, cpntrolling through flush type 10 Amp. switch to be fitted with frame and Tress plate, Make of switch - ROMA, CONA,Schenieder.

Concealed wiring of 6 Amp plug point in heavy gauge PVC conduit pipe as per IS 9537 29 with PVC insulated single core 1.5 sqmm multistrand copper conductor wire in voltage grade 1100 volt as per IS 694 with ECC of 1/18 SWG Copper wire. Make : Polycab, Anchor, Finolex.controlling through flush type 10 Amp. switch to be fitted with frame and Tress plate , Make - ROMA, CONA, Schenieder

Supply and fixing of 16 Amp. MCB with Sheet steel enclosure. Make:- Havells, L&T , Standard, HPL , Anchor.

Supply,fixing,testing and commissioning of water proof junction box of size 20" X 10" X 6" with 14 SWG MS Sheet with copper bus bar for suitable size of cap 250 Amp/440 volt with ceiling and locking arrangement complete in all respect.

Supply of 3 Phase Street light Panel 6 KW, Time Switch - Astronomical, Contactor rating -32 A TP, MCB rating - 40 A TPN, Item Code - IHXTS0306A. Make : Havells or similar.

B-NS FOR ALL ITEMS (PART-B) Under HT

Supply of XLPE LT Aluminium cable of size 4 core x 300 Sq. mm. multistained armoured ISI approved suitable to 1100 volt grade Make: Paragon, Havells,Nicco, Universal.

Supply of 3 Core X 120 sq. mm HT Cable duly ISI approved of reputed make suitable for 11 KV. Make - Havells, Gloster, Nicco, Polycab

Supply of XLPE LT Aluminium cable of size 4 core x 35 Sq. mm. multistained armoured ISI approved suitable to 1100 volt grade Make: Paragon, Havells,Nicco, Universal.

Transportation of above cable from store to site. (supplied by Railway)

Supply of HDPE Pipe, Laying and drawing of HT / LT cables through Pressure machanism inside the pipe and proper connection to junction Box as per site requirement in all respect ( Size of cable HT / LT 3 core / 4 core from 50 sq mm to 240 sq. mm ), thickness of HDPE should not be less than 06 mm. HDPE will be laid down in the pucca Trench as per site requirement of pucca trench as well as HDPE should be confirming to IS 14333 1966 or latest.Make of Pipe -Asian, Appollo pipes, Vectus, Utakarsh HDPE pipe , pressure rating at 30 Deg. centigdade : PN 6 , confirmity to IS : 4998 or latest. Thickness of pipe min. 5.3 mm and max. 5.9 mm ISIMarked , CM/L : 7395589, Material Grade : PE 100.

Supply of HDPE, Laying and drawing of HT / LT cables manually inside the pipe and proper connection to junction Box as per site requirement in all respect ( Size of cable HT / LT 3 core 06 / 4 core from 50 sq mm to 240 sq. mm ), thickness of HDPE should not be less than 06 mm. HDPE should be Confirming to IS : 14333 1996 or latest , Thickness of Pipe Min. 5.3 mm and max. 5.9 mm ISI Marked, CM / L : 7395589 , Material Grade : PE 100 , Make of Pipe : Asian, Appollo Pipes, Vectus ,UTAKARSH

supply, Fixing, testing and commissioning of 11 KV indoor type heat shrinkable type cable end sealing box suitable to 3 x50X 70/ 95/ 120 sq.mm duly ISI approved complete in all respect.Make - Raychem, RPEG, Renson.

Supply, Installation, testing and commissioning of 11 KV lightening arrestor as per 08 spec. No:- CEE/LA/062-11-88. each set consists of 3 nos. of lighting arrestor confirming to IEC-99- 4/199/standard and IS: 3070 part-1(1985). Make: Rashtriya Electrical & Engg, Jaipuriya Brothers Electrical Pvt Ltd, Global Industries.

Supply, and erection of Earthing with 50 mm Dia. 3 mtr. Length GI Pipe, B-Class as 09 per IS:3043-1987, Confirming to IS :1239 or latest complete with earth box including connection from earth Electrode to MDB/SDB/Poles with 8 SWG GI Wire. Make of Pipe : TATA, JINDAL Surya,Bhushan with latest Ammendment and Technical Specifications. 3384000.0

Supply of outdoor type compact type secondary sub-station (CSS) consisting of cast resin dry type AN cooling transformer of capacity 500 KVA , 11 KV/415 volt with off load tap switch, vectorgroup- Dyn 11 KV 630 Amps, 21 kA for 03 sec SF6 gas insulated non extensible compact Switchgear (rmu) consisting of 02 nos motorized load break Switch and 01 no motorized VCB and 10 bus pt meterining pannel self power series trip microprocessor base numerical over current & earth relay (idmtl + inst) for protection in VCB and fault passage indicator in both lbs. LT panel consisting of 01 no 1000 Amp air circuit breaker 4 pole , drawout type motorized , 50 KA microprocessor based for release for O/L, S/C & E/F protection as outgoing suitable for 415 V operation MCCBs with LSIG protection including necessary HT, LT and control cabling works internal earthing connection by GI strips etc and the said CSS should be fully compatible for SCADA based remote operation and monitering facility. (Make- Siemens/ABB/Schineider/L&T.) CSS & its Component Make Should be as per PCEE/HJP guideline vide letter No ECR/ELE/G/206 Dt.29.06.2023 (attached)

Installation , connection, testing and ommissioning of above transformer inluding plinth constrution alongwith constrution of ironsed struture with metal & transparent sheet top Cover and MS grill structure duly painted at four sides of transformer.

Supply, fixing, testing and commissioning of 11 KV HT floor mounted indoor type VCB panel type UMV vertical isolation and horizontal draw out type 400 Amp /250 MVA , 3 phase 12 comprisioning of 3 nos. one for incoming and two nos. for outging 400 Amp 11 KV 250 MVA VCB with CT ratio 100/50/5A PT 11 KV/110 volt auxillary relay , tip relay, overcurrent relay, eath fault relay, voltmeter, ammeter, selector swith, copper busbar 630 Amp capacity (1 set) complete in all respect make- Siemens, areva, L&t

Supply, fixing, testing and commissioning of GUY set with standard Anchor plate of size 12" x12" x 1/2" with guy wire of size 7/10 SWG GI wire an suitable Guy insulator , clamp etc with foundation material etc.

Fixing, testing and commissioning of 4 pole ACB with all protection and removal of existing OCB.

Design, fabrication, installation, testing & commissioning of supply of Cubical LT distribution Board/Panel fabricated ((minimum size length 3.7 mtr X Height 2.15 mtr X Thickness 1.0 mtr.) with 14 SWG cold rolled steel sheet supported on suitable MS angle /Channel frame welded/Screwed/nuts-bolts including equiped, fitted and connected to feeders /bus bars with ACB three pole 800 Amp, breaking capacity 50 KA -02 nos, COS four pole 1000 Amp. - 2 nos., MCCB three 15 pole 320 amp , breaking capacity 36 KA - 02 nos, MCCB three pole 250 amp, breaking capacity 36 KA - 06 nos, MCCB three pole 125 amp. breaking capacity - 35 KA - 04 nos, MCCB three pole 80 amp. breaking capacity 35 KA - 04 nos, multi function energy meter -01 no, three phase ammeter - 16 nos, CT ratio 1000/5 Amp. - 03 nos, CT - 400/5 amp - 06 nos, CT- 300/5 amp -18 nos & CT - 200/5 Amp - 24 nos, LED indication lamp for RYB phase -17 set (51 nos.) copper bus bar etc. detail as per annexure, A: The pedestal of angle iron frame shall be secured on floor by suitable grounting bolt and nuts. Each cubical of the panel shall have independent front opening of individual ACB, COS and MCCB and additional opening as per requirement . The panel shall have spray painted with one coat of red oxide as primer and two coats of super enamel paints. Nomencalature of each cubical shall be indicated on Al. foil (by screen priming process) duly revetted to front cover of cubical. Material which is required in fabrication , installation , testing , commissioning will be supplied by contactor. work will be done as per instruction of site in -charge.

Transportation of above Rail Pole from PWI/store to site.

Supply,fixing,testing and commissioning of triple pole GOS suitable to operated on 3 Phase 11 kv AC supply of 400 Amp. Cap. 4 insulator type with DO fuse unit and operating rod with locking arrangement etc. ISI approved, Make : Rastriya Electrical & Engg, National, Jaipuria Brothers.

Supply( except rail pole), fabrication, & erection of 'H' Pole structure bracing with 18 angle iron 50 X 50 X 6 mm & 75 X 40 X 6 mm channel nut bolt, rail pole length exceeding 10 m but not exceeding 13 mtr direct in ground including excavation refilling with cement concrete 1:3:6 ( Cement, concourse sand, 40 mm graded stone nominal size) made of foundation 20 mm X 20 mm continued upto 30 cm above ground level etc as per required.

Supply,fixing,testing and commissioning of 11 KV Outdoor type heat shrinkable type cable end sealing box suitable to 3 x 185/150/120 Sq. mm. duly ISI approved complete in all respect. As per item code of DENSON. Make -DENSON / REYCHEM or RPG.

Supply of Automatic Transfer Switch 3 Phase , 125 Amp 4 Pole . Make -Havells, Indoasian.

Supply of 90 W / 92 W LED Street light with pressure die-cast Housing with Toughened Glass and individual LEDs with secondary optics and IP-66 Protection. Make- Philips, Bajaj, Havells, CG.

Fixing,testing and commissioning of LED street light fittings with suitable clamps with safe arrangement as per site requirement