Providing, Installing, Testing Of L.E.D. Street Light Fixture With Pole As Per Various Location Chart, At- Jasdan Dist: Rajkot Under 15(Percentage) Vivekadhin Grant (Year-2026-27)

NAME OF WORK: PROVIDING, INSTALLING, TESTING OF L.E.D.STREET LIGHT FIXTURE WITH POLE

LOCATION : As Per Location Chart, At. Jasdan

TOTAL AMOUNT PUT TO TENDER

TOTAL AMOUNT PUT TO TENDER

PERCENTAGE RATE TENDER

Sr.No. Schedule Amount

1 Schedule - "B"- 1

2 Schedule - "B"- 2

Total Amount Rs.

Total Amount Rs.

I/We am/are willing to carry out the work @ ________% Above / Below_____________Percentage (should be

writen in figures and words) of the Estimated rates mentioned above amount of my / our Tender works out as

Estimated Amount Estimated Amount

Put to Tender Rs. 23,79,117=00 Put to Tender Rs. 23,79,117=00

Total Rs. Total Rs.

(In Words (In Words

Signature of the Contractor

Consl. Engineer Municipal Engineer

"DESIGN POINT" Jasdan Nagarpalika

Chief Officer President

Jasdan Nagarpalika Jasdan Nagarpalika

JASDAN NAGARPALIKA - JASDAN

SCHEME : 15% VIVEKADHIN GRANT (YEAR-2026-27)

NAME OF WORK :- PROVIDING, INSTALLING, TESTING OF L.E.D.STREET LIGHT FIXTURE WITH POLE

Location :- Atkot Gate to Ruda Bhagat Factory, At. Jasdan

SCHEDULE - "B-1"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Supplying and erecting approved make Octagonal pole made from HR sheet

steel. The pole should be made as per IS. and shall be coated with hot dip

galvanizing as per IS 2629/2633/4759, suitable suspend local wind speed

with integral Junction box consist of terminal plate of min 6mm Hylam sheet,

standard profile 35mmX7.5mm Din-Rail for MCB Mounting, stud type terminal

and arrangement for cable termination to be erected With Suitable

foundation (Included) as per details given by manufacturer considering site

(E) 7 Mtr. Long 70 mm Top X 135 mm bottom dia, 3mm thickness with

225mmX225mmX16mm base plate, 4-M20 Bolts and 600mm long with

necessary G.I. J Bolts Approx Pole weight 67 kg 41.00 11411.99 No.

Providing Street Light pole bracket consisting of medium class MS pipe of

4.2 cms. Out side dia complete with suitable sleeve tubing 45 cms. long M

S. pipe (Medium Class). Suitable for 76.5 mm /80mm / required size of pole

top having sufficient fastners for fixing the brackets and having spread of

1.5.mtr. length with 110 deg.with vertical plane & suitable welded stays,

reducer and with check nuts complete painted with one coat of Red oxide /

PU base primer and two coats of Aluminium / PU paint. paint with following

nos of arms. [B] Double Arm Bracket 1.5 Mtr 41.00 916.07 No.

Supplying and erecting LED street light / Flood light fittings with High power

White LEDs wattage of 3 Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses, with toughened

glass with company mark/name engraved or embossed 160 to 270 V,Power

Factor more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio

>0.45, Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 %.(

fittings required LM-79 & LM-80 certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.) (A) Street Light (IP-

65), Surge protection -4KV integral and ,Light must have 440VAC line supply

with over-voltage protection. Cat-lll (ii) 60 Watts 82.00 4997.48 No.

providing and erecting Miniature circuit breaker single pole 6A to 25A suitable

to operate on 240 V A.C. system and having breaking capacity 10 KA to be

erected in existing box. confirming to IS 8828/1996 with ISI Mark Cat.-III

Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured copper cable

KV grade to be erected as directed of following size. (A) 2 core 2.5 Sq.mm 348.50 101.00 Mt.

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand /

Solid Copper conductor for 1.1 KV. to be laid on wall with necessary

clamps or in existing trench / pipe at road crossing or floor of following size

of cables. (A-1) 4 core 4 Sq. mm 1030.00 364.61 Mt.

Providing & laying approved make Double walled corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with necessary connecting

accessories of same material at required depth in existing trench for laying of

cable. below ground / road surface for enclosing cable (A) 50 mm dia 1030.00 62.62 Mt.

Supplying & erecting IP 55 grade following size section pillar fabricated from

joint less M.S. Sheet with angle iron legs made from jointless M.S. Angle with

cable clamps to be buried in ground to have appropriate erection to work

uniform until erected with cement concrete foundation and 45 cm high bricks

work finishing with plaster etc. hinged double door internally supported on

both side, with internal and outside looking arrangement with look and keys in

duplicate 35 x 35 x 5 mm M.S. Angle of Two Nos. one is welded and other

with nut and bolt for erecting Bakelite sheet. Painting the Section Pillar inside

and out side with three tank powder coated paint. section pillar roof should

be without joint with water leakage proof & tested as per IP 55 test & followed

by IS 2147 of 1962 (C) 60 X 30 X 45 cm section pillar fabricated from

Gauge MS Sheet with angle iron legs 45 cm long made from 35 X 35 X 5 mm

thick MS angle. 1.00 1884.66 No.

Supplying & erecting approved make Digital time switch having lithium cell

years operative and operate battery backup 1 channel day clock with

memory programme, suitable to operate on 240V + 5%, 16A with, floating

contacts Minimum switching setup time 1 minimum & LCD display. Also

comprised permanent ON/OFF switching. Programming switches & housed

in fire proof thermoplastic enclosure & transparent cover erected as required

with necessary connection erected as directed. 1.00 3168.37 No.

Pproviding and erecting Approved make Four pole moulded case circuit

breaker having breaking capacity ICU of 25 KA. at 415 V,having normal

current rating up to 25 A to 100A. with Fixed thermal & magnetic release

suitable to work on A.C. supply 50 c/s. with all internal connections, spreader

tinned copper & complete erected in existing 16 G.M.S. housing. ICS=100%

of ICU only - Cat III 1.00 6173.12 No.

Supplying and erecting approved make suitable panel indicator LED type

lamp, lens cover, complete erected with necessary connections. 1.00 43.43 No.

Providing & erecting electronic overload relay with single phasing preventer [

(L&T, Alstom, BCH,T.C., Siemens, C&S make) [a] for 30 to 50 Amp. 1.00 5752.96 No.

Providing and erecting AC-3 duty 4 pole A.C. Coil with 2 NO & 2 NC aux

contacts complete with 415V/220V operating coil suitable for (L&T, BCH,T.C.,

Siemens, C&S make) (a) for 25 / 32 A rating 1.00 1435.21 No.

Making trench in Hard Murrum / Tar Road of suitable width of 90 cm or

required depth for laying any size of cable or locating the fault all over the

run and back filling the same and making the surface as normal ground. 1030.00 74.74 Mt.

providing and erecting Cast iron earth plate size 45 X 45 X 0.35 cms.

buried in specially prepared 2.5 Mtr. Deep earth Pit complete with necessary

G.I. strip in G.I. pipe 2 Mtr. long with coupling and G.I. plug for earthing of

switch gear, conduit run or power plug etc. 41.00 856.48 No.

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Cons. Engineer Engineer

DESIGN POINT Jasdan Nagarpalika

Chief Officer President

Jasdan Nagarpalika Jasdan Nagarpalika

JASDAN NAGARPALIKA - JASDAN

SCHEME : 15% VIVEKADHIN GRANT (YEAR-2026-27)

NAME OF WORK :- PROVIDING, INSTALLING, TESTING OF L.E.D.STREET LIGHT FIXTURE WITH POLE

Location :- W-7, Khanpar Chowkdi to BAPS Swaminarayan Mandir, At. Jasdan

SCHEDULE - "B-2"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Supplying and erecting approved make Octagonal pole made from HR sheet

steel. The pole should be made as per IS. and shall be coated with hot dip

galvanizing as per IS 2629/2633/4759, suitable suspend local wind speed with

integral Junction box consist of terminal plate of min 6mm Hylam sheet, standard

profile 35mmX7.5mm Din-Rail for MCB Mounting, stud type terminal and

arrangement for cable termination to be erected With Suitable foundation

(Included) as per details given by manufacturer considering site requirement.

(D) 6 Mtr. Long 70 mm Top X 135 mm bottom dia, 3 mm thickness with

200mmX200mmX12mm base plate, 4-M20 Bolts and 600mm long with

necessary G.I. J Bolts .Approx Pole weight 59 kg

Providing Street Light pole bracket consisting of medium class MS pipe of

cms. Out side dia complete with suitable sleeve tubing 45 cms. long M S. pipe

(Medium Class). Suitable for 76.5 mm /80mm / required size of pole top having

sufficient fastners for fixing the brackets and having spread of 1.5.mtr. length

with 110 deg.with vertical plane & suitable welded stays, reducer and with check

nuts complete painted with one coat of Red oxide / PU base primer and two

coats of Aluminium / PU paint. paint with following nos of arms. [B] Double Arm

Bracket 1.5 Mtr 25.00 916.07 No.

Supplying and erecting LED street light / Flood light fittings with High power

White LEDs wattage of 3 Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses, with toughened glass

with company mark/name engraved or embossed 160 to 270 V,Power Factor

more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45,

Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 %.( fittings

required LM-79 & LM-80 certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The Engineer incharge may select

any wattage capacity between the ranges shown.) (A) Street Light (IP-65), Surge

protection -4KV integral and ,Light must have 440VAC line supply with over-

voltage protection. Cat-lll (ii) 60 Watts 25.00 4997.48 No.

providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to

operate on 240 V A.C. system and having breaking capacity 10 KA to be

erected in existing box. confirming to IS 8828/1996 with ISI Mark Cat.-III 25.00 112.11 No.

Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured copper cable 1.1 KV

grade to be erected as directed of following size. (A) 2 core 2.5 Sq.mm 187.50 101.00 Mt.

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand /

Solid Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or

in existing trench / pipe at road crossing or floor of following size of cables. (A-

Providing & laying approved make Double walled corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with necessary connecting accessories

of same material at required depth in existing trench for laying of cable. below

ground / road surface for enclosing cable (A) 50 mm dia 875.00 62.62 Mt.

Supplying & erecting IP 55 grade following size section pillar fabricated from joint

less M.S. Sheet with angle iron legs made from jointless M.S. Angle with cable

clamps to be buried in ground to have appropriate erection to work uniform until

erected with cement concrete foundation and 45 cm high bricks work finishing

with plaster etc. hinged double door internally supported on both side, with

internal and outside looking arrangement with look and keys in duplicate 35 x

x 5 mm M.S. Angle of Two Nos. one is welded and other with nut and bolt for

erecting Bakelite sheet. Painting the Section Pillar inside and out side with three

tank powder coated paint. section pillar roof should be without joint with water

leakage proof & tested as per IP 55 test & followed by IS 2147 of 1962 (C) 60 X

30 X 45 cm section pillar fabricated from 16 Gauge MS Sheet with angle iron

legs 45 cm long made from 35 X 35 X 5 mm thick MS angle.

Supplying & erecting approved make Digital time switch having lithium cell

years operative and operate battery backup 1 channel day clock with 14 memory

programme, suitable to operate on 240V + 5%, 16A with, floating contacts

Minimum switching setup time 1 minimum & LCD display. Also comprised

permanent ON/OFF switching. Programming switches & housed in fire proof

thermoplastic enclosure & transparent cover erected as required with necessary

connection erected as directed. 1.00 3168.37 No.

Pproviding and erecting Approved make Four pole moulded case circuit breaker

having breaking capacity ICU of 25 KA. at 415 V,having normal current rating up

to 25 A to 100A. with Fixed thermal & magnetic release suitable to work on A.C.

supply 50 c/s. with all internal connections, spreader tinned copper & complete

erected in existing 16 G.M.S. housing. ICS=100% of ICU only - Cat III

Supplying and erecting approved make suitable panel indicator LED type lamp,

lens cover, complete erected with necessary connections. 1.00 43.43 No.

Providing & erecting electronic overload relay with single phasing preventer [

(L&T, Alstom, BCH,T.C., Siemens, C&S make) [a] for 30 to 50 Amp. 1.00 5752.96 No.

Providing and erecting AC-3 duty 4 pole A.C. Coil with 2 NO & 2 NC aux

contacts complete with 415V/220V operating coil suitable for (L&T, BCH,T.C.,

Siemens, C&S make) (a) for 25 / 32 A rating 1.00 1435.21 No.

Making trench in Hard Murrum / Tar Road of suitable width of 90 cm or required

depth for laying any size of cable or locating the fault all over the run and back

filling the same and making the surface as normal ground. 875.00 74.74 Mt.

providing and erecting Cast iron earth plate size 45 X 45 X 0.35 cms. buried

in specially prepared 2.5 Mtr. Deep earth Pit complete with necessary G.I. strip in

G.I. pipe 2 Mtr. long with coupling and G.I. plug for earthing of switch gear,

conduit run or power plug etc. 25.00 856.48 No.

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Cons. Engineer Engineer

DESIGN POINT Jasdan Nagarpalika

Chief Officer President

Jasdan Nagarpalika Jasdan Nagarpalika