S.R. to Judicial Staff Quarters at Jetpurpavi (Plumbing Work, Door Repairing & other Misc.Work) Ta. Jetpurpavi Dist. Chhotaudepur

Name of Work :- S.R. to Judicial Staff Quarters at Jetpurpavi (Plumbing Work, Door

Repairing & other Misc.Work) Ta. Jetpurpavi Dist. Chhotaudepur.

BILL OF QUANTITIES

Memorandum showing item of works to be carried out.

It. Item of Work Qty. Unit Rate in Amount

1 Dismentling doors, windows, ventilators etc. (wood or steel) shutters including 60.00 Each 196.66

chowkhats architraves, holdfasts and other attachment etc. complete and

stacking them within all lead and lift.(i) Not exceeding 3 Sq.M in area

2 Dismentaling tiled of stone floors laid in mortar including stacking of 79.00 Sqm 50.28

serviceable materilas and disposal of unserviceable materials with all lead and

3 Marble Slab Polished granite stone 20 to 25mm thick black (single piece) for 58.00 Sqm 3246.14

vertical wall/Doors/Windows Sill,Jams for cladding as per design including full

moulded round inside edge and laid on 10 mm thick cement mortar 1:3 (

cement: 3 coarse sand) jointed with grey cement slurry including rubbing and

polishing finishing etc. complete.

4 Providing and fixing M.S. grills of required pattern to wooden frames of 597.60 Kg. 166.22

windows etc. with M.S. flats at required spacings and frame alround, square or

round bars with round headed bolts and nuts or by screws.

(B) ORNAMENTAL GRILL

5 Providing and fixing Door of factory made & stamped I.S 12823 grade one, 79.00 Sqm 3975.36

type one 35 mm thick solid core , melamine faced , three layered resin, flushed

door, having decorative lamination on both side including 30 cm long Stainless

Steel pipe handle on both side SS ASIS 304 Grade, SS Stopper 20 CM,SS

Aldrop 30CM both side, SS Hinges 3No`s in each shutter & fixtures &

fastenings as directed by Engineer in Charge, etc. complete.

6 Providing and fixing window having extrudedaluminum Colour anodized 20.00 Sqm 1583.95

section frame main outersize 95mm x 24mm x 1.17mm 2459 @ wt.of

Kg/mt), horizontal Three trackmember size 92mm x 31.75mm x 1.30mm

vertical member ofsize 92mm x 31.75mm x 1.50mm with sliding shutters of

horizontal member size 40 mmx18mm x1.29mm Section no:8947@ wt.of

0.456 Kg/mt), verticalmember of size 40mm x 18mm x 1.29 mm Section

no:8949 @ wt.of 0.456Kg/mt/ with 5 mm thicktransparent bronze colour tinted

float glass with powdercoated aluminum fittings and fixtures and

transparentsilicon sealant glass fixing to frame as per details etc

7 Providing and fixing standared extruded of alluminium section of size 63mm x 3.00 Sqm 1175.56

38.10mm x 1.2mm @ Wt. 0.643 Kg/mt with colour anodized alluminium frame

for ventilation with 5 mm thick frosted glass as details etc complete for

8 Painting two coats (excluding priming coat) on new steel and other metal 152.00 Sqm 94.39

surface with enamel paint, brushing, interior to give an even shade including

cleaning the surface an even shade including cleanicn the surface of all dirt,

dust and other foreign matter.

9 Providing and laying cement concrete 1:3:6 (1- Cement : 3-Coarse sand : 6- 42.00 Cum 4026.02

crushed stone aggregates 20 mm nominal size) and curing complete including

cost of formwork in (A) Wall Caps / Coping

10 Supplying and erecting approved make of tube fitting with One no T-5 tube 24/ 14.00 Each 480.76

28 W with Electronic ballast with each tube separately THD less than 10 &

built in adaptors, GI / PVC housing & mirror optic reflector, suitable to work on

120V - 300V, A.C. supply with connector and adapter if required. [Make of

fitting & tube may be differ& fitting shall be providing with tube]

It. Item of Work Qty. Unit Rate in Amount

11 Providing and erecting, heavy duty flood light integral luminaire comprises die 6.00 Each 2311.89

cast aluminium body with heat resistant toughened front glass, silicon rubber

gasket,anodised reflector hot deep powder coated cradle clamp with suitable

size of necessary built in control gear complete with lamp.

12 Providing & erecting Approved make Ceiling Fan with double ball bearing ISI 4.00 Each 2311.89

mark with Condenser 230 volt A.C.50 Hz 1200 mm sweep complete having

blades aluminium body and blade sets having ornamental design shanks

canopy erected with earthing. [ Make shall be approved by Engineer in

13 Providing and laying broken chine mosaic flooring for terrace using 12 79.00 Sqm 779.70

mm to 20 mm broken pieces of glazed tiles to be laid over cement mortar 1:3

to plain or slope and to be tempered to bring mortar creme out upto

surface using white cement including rounding off junctions and extending

them upto 15 cm along the wall,clearing with water and oxalic acid etc. as

14 Providing erecting and fixing double coated Syntex PVC. (ISI) water tank of 4000.00 Liter 3.95

required capacity each with all necessary fittings and connection etc. complete

15 Providing & Fixing Chromium plated 25 mm diameter half turn flush cock. 12.00 No. 225.97

16 Providing & Fixing Brass screw down stop cock 25 mm dia 6.00 No. 189.16

17 Providing and fixing screw down bib taps of following size.(B) Brass chromium 30.00 No. 214.81

plated screws down Bib Tap. (ii) 20mm dia.

18 Providing & Fixing Gun Metal Wheel Valve 25mm dia 4.00 No. 360.35

19 Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( 20.00 Rmt 91.84

SCH- 40) for cold water including fittings make equivalent as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at

every two metre C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials. 25mm dia

20 Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( 25.00 Rmt 148.12

SCH- 40) for cold water including fittings make as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of clamp at every two

metre C/C or shall be concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with adhesive solvent,

including cost of all materials. 40mm dia

21 Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe ( 30.00 Rmt 195.67

SCH- 40) for cold water including fittings make as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of clamp at every two

metre C/C or shall be concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with adhesive solvent,

including cost of all materials.

22 Providing, laying and jointing in true line and level 110 diameter U.P.V.C SWR 50.00 Rmt 897.79

(Type B) Pipe conforming to IS 13592-1992 with one end plain and other end

socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved

make for drainage system pipe line, pipe shall be jointed with each other with

rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size

mm diameter x 149 mm length x 145 mm height at every 2000 mm centre to

centre or shall be concealed in walls as directed including necessary fittings

such as bends, "Y" "T" shoes etc. including testing of pipes and joints and

jointed with adhesive solvent cement including cost of all materials.

i.e. Rupees Ten lakh Eleven thousand Three hundred Fifty and paise Ninety Three only.

It. Item of Work Qty. Unit Rate in Amount

I/We am/are willing to carry out the work @ _______ __ % above/below percent (Should be written

in figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-

Charge for which no extra payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills.

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-

10/2017 Cement Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is

a change as per actual mix design the cost of difference of cement consumption have been deducted from the rate

of original item at the rate of input rate mentioned in all the tender.

5. All item rates considered in the tender are inclusive of execution at all floor levels, including all leads and lifts

6. The Contractor will have to submit the all required mix design at his own cost before execution as directed

and to be approved from the Engineer in charge.

7. Credit for dismantalled materials of amount of Rs. 5,000.00 must be recovered from 1st R.A. bill of

All the above items of the BoQ, including item description, unit, rate, and amount, have been verified

by me and found to be in order.

Deputy Executive Engineer Divisional Account Officer Executive Engineer

Bodeli (R&B) Sub Division, Chhotaudepur (R & B) Division, Chhotaudepur (R & B) Division,

Bodeli Chhotaudepur Chhotaudepur