Supply ,installation,Testing commissioning of LED wall,Auditorium Furniture and Other works

Supply , Installation,Testing and Commissioning of Indoor LED Wall ,Display Size-16x6.4 ft, LED Type: Black SMD 3 in 1 top1515,Pixel Pitch(mm)-1.86,Panel Dimension(WXHXD)/(mm) 320X480X46.5, , Pixel Per Panel 172X256, Module Dimension(WXH)(mm)- 320x240,Brigtness(nit)-600 , Contrast ratio 3000:1 ,Gray scale (Bit): 13, temperature(K): 9300, Viewing Angle(H/V)(°) :160/140,Driving Type 1/58 AC Operating Voltage(V) :100 ~ 240 Power Consumption (Max./Avg.) (W/m2) :360/120 Heat Generated (Max./Avg.) (BTU/h/m2): 1229/410, IP Rating (Front/Rear): IP40/IP 21, Module Maintenance & installation: Front, Make:Any certified complying with technical specifications and requirements of this tender, Warranty-36 months.

Supply,Installation and Commissioning of Auditorium Chairs • Tip-Up and back push mechanism chair • Arm rest to arm rest(ctc) :508mm • ABS molded housing for seat &back covers. • All sheet metal parts with powder coated. • Arm rest in PPCP (without Cup holders) • Seat numbering on inner both the side of the chair stands with silicon stickers • Row number for seat along the les • Provision for lights on sides along with antes with the row and the seat numbers display. Fabric • Colour approved by customer,• 100% polyster with 4 mm lamination Frames • 15 mm thick high pressure & induction heated plywood for seat manufactured with hardwood veneers • 12 mm thick high pressure & induction heated plywood for Back manufactured with hardwood veneers Polyurethane foams Seat cushion tapered type front portion with a hump Front - 115 mm(+/- 5 mm),Back - 90 mm (+/- 5mm) b) Back cushion bucket type Headrest - 70 mm (+/- 5mm),Centre - 45 mm(+/-5mm) ,Bottom -95 mm (+/-5mm),Sides contours - 45 mm (+/-5mm) Size (a) seat cushion - 465 mm (+/-5mm) x 435 mm (+/-5mm),(b) Back cushion - 640 mm (+/-5mm) x 435 mm (+/-5mm),Density of cushion - 50(+/-5) kg/m3 Sheet metal components:HRCA/CRCA Sheet metal 15: 2062 - 2011 & IS 4923-1997 a) Side stand 3mm (+/- 0.2mm) thick size: 415mm (+/- 5mm) x 345mm(+/-5mm) both side bottom profile design cut (b) 75mm x 25mm 14g (+/- 2 mm) 190 mm length tubular pipe for the leg welded to the 3mm plate. (c) Flat for base of the stands 280mm (+/-2mm) length 50 mm (+/- 2 mm) x 5mm (+/-0.2 mm). d) Mechanism components 2mm HRCA Back push box 180mm (+/-2mm) x 60 (+/-2mm) mm & height of the box 15mm (+/-2mm), ear "L" bracket attached to the box 190mm(+/-2mm) x 135mm (+/-2mm). With two slot holes for fixing the back Tip-up box 180mm(+/-2mm) x 60(+/-2mm) mm & height of the box 15mm(+/-2mm), ear "L" bracket attached to the box 95mm(+/-2mm) x 125mm(+/-2mm). Seat and Back cushion housing:ABS molded vacuum forming out of 2mm sheet Instillation of the chairs The chairs to be installed to the flooring with the Chemical anchoring. (M10 x 100 mm).

Supply,Installation &Commissioning of Flooring Mat Style: Origin/Shades Fibre: Solution Dyed Yarn: Polypropylene Construction Loop Pile Plain Primary backing woven PP secondary backing action back static control permanent Flammability Passes fill test Roll width 4M/2M Gauge 1/10 Roll length -40 mtr

Supply,Installation &Commissioning of Window Screen Rolling Blinds Provision for Upper Windows Roller Blind, Fabric Specification: Made of Abstract quality black out range, fabric with thickness 0.5mm Weight: - 320 Gsm (+/- 5%) Tearing strength (warp)- 5.8 kgf Bursting strength -30 kgf Colour - fastness to light-5 to 6 Width-230cms Control Unit : Made of high strength reinforce plastic. The clutch is of wrap spring design. High carbon steel springs to be used. transmit motion from driving to driven members of clutch mechanism clutch is operated directionally by the use of endless beaded chain. Clutch never needs any adjustment. idler Made of high strength reinforced plastic consisting of a center shaft and mounted on the bracket by using a plastic lock. The metal sleeve inside the plastic lock provides bearing surface for the centre shaft, which rotates freely, providing smooth, quiet and long wearing operation. Head rail Made of aluminum extruded rail Power coated in white Control unit and Idler are mounted on the Head rail with powder coated MS brackets. Roller tube: Made of an anodized extruded tube of high Strength alloy Control unit and idler are fixed to the either ends of the tube The fabric of the blind is to be fitted to the tube with heavy duty adhesive tape Bottom rail: Made of an aluminum extruded rail with a groove for fixing the fabric and power coated in white and to be fixed to the bottom of the fabric and purpose of it in, to keep the fabric in the tension and straight. The fabric is to be fitted to the tube using. Operating chain: Made of 4.5mm plastic beads molded on 2.2mm. thick polyester chord with 6mm pitch of the beads. The chain drives the sprockets of the control unit to close and open the blind. The pitch of the chain corresponds to the sprocket in perfect match trouble free operation. for Fixing brackets & clamps. Made of mild steel and zinc plated. The clamp is made up of spring steel of thickness 0.7mm and zinc plated standard sizes as per manufacturer. (All specifications given are subject to standard tolerance.)