DAY TO DAY MAINT OF INTERNAL ELECTRIFICATION LIGHT FITTINGS FIXTURES AND ALLIED WORKS IN OUTER POCKETS OF DOMESTIC AREA UNDER AGE EM, GE (AF) NO 02 JODHPUR

Amount

Taking down carefully copper/aluminium point wiring (Light/ fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc., stacking at site for reuse or removing materials to store for keeping in for taking credit and making good the disturbed surfaces / walls/ floors etc., as per existing, complete all as specified & directed.

M&L for point wiring with 1.5 Sq. mm, multi-stranded copper conductor, single core, PVC insulated and unsheathed cable for phase and neutral, including 1.5 Sq. mm PVC insulated unsheathed multi-stranded copper conductor single core cable as earth continuity conductor (in green colour) connected to common earth dolly, drawn in and including PVC Casing and Capping, GI terminal boxes 1.2mm thick fixed flush to wall surface, covered with & including 3 mm thick plastic laminated sheet top cover for mounting switch and sockets etc. complete all as specified and directed for following : -

One light point/exhaust fan point controlled by one switch or one ceiling fan point controlled by one switch & electronic type fan regulator.

One light point controlled by two Nos 5 Amps switch two way

One 3 pin 5 Amp switch & socket outlet on same board with other switches.

One 3 pin 5 Amp switch & socket outlet on Independent board.

One bell point controlled by one switch 5 Amps bell push.

All same as per item No. 2.00, here-in-above but wiring using 2.5 sqmm multi-stranded copper conductor, single core, PVC insulated and unsheathed cable, including 2.5 Sq. mm PVC insulated unsheathed multi-stranded copper conductor single core cable as earth continuity conductor (in green colour) connected to common earth dolly for 6 pin, 15/16 Amps socket outlet on independent board.

S&F in repairs Switch piano, flush type, single pole, one way, 6 Amp.

S&F in repairs Socket outlet 2/3 pin, 2-in-1, 5/6 Amp, flush type.

S&F in repairs Switch Socket combination outlet 6 pin, 6/16 Amp, flush type

S&F in repairs Ceiling rose surface bakelite 65x50mm three terminal.

S&F in repairs Lamp holder insulated PVC/Polycarbonate/bakelite body, fixed on PVC round or square box using necessary screw & gutti complete all as specified.

S&F in repairs Stepped type electronic fan regulator, socket size, flush type 230V AC.

S&F in repairs Stepped type electronic fan regulator, switch size, flush type 230V AC.

S&F in repairs electronic Bell Bul-Bul music, 230 volt, single phase.

S&F in repairs bell push, type, 6 Amps, 2 Module

S&F in repairs switch modular single pole one way 6 Amps 230 volt 1 module.

S&F in repairs switch modular single pole one way 16 Amps 230 volt 1 module.

S&F in repairs Socket modular 6 Amp 2/3 pin combined two modules.

S&F in repairs Socket modular 6&16 Amp 2/3 pin combined two modules.

S&F in repairs electronic fan regulator modular stepped type 120 watt, two modules.

S&F in repairs modular white or Ivory cover plate with frame 1 module

NOTES FOR LED LIGHT FITTINGS & BULBS : (i) All LED light/luminare shall meet the provision laid down in IS - 16101, 16102 Part-I/II, 16103 Part-I, 16104, 16105, 16106, 16108/2012 and 15885 Part -II / Section 13. (ii) Contractor shall submit test report of LED street light fitting from Government accredited test laboratory for LM-79 and LM-80. (iii) Contractor has to furnish a replacement warranty of 02 years for LED light fittings complete including lamps from the date of completion of contract. The product will be replaced on site free of cost in the following case :- (a) Manufacturing defects. (b) Failure due to mechanical and electrical impact. (c) Drop in lumen (or lux at 1 m) below 90% of claimed values of lumen (or lux at 1 m) of the LED /Luminaries.

S&F in repairs modular white or Ivory cover plate with frame 2 module

S&F in repairs modular white or Ivory cover plate with frame 3 module

S&F in repairs modular white or Ivory cover plate with frame 4 module

S&F in repairs modular white or Ivory cover plate with frame 6 module

S&F in repairs modular white or Ivory cover plate with frame 8 module

S&F in repairs modular white or Ivory cover plate with frame 12 module

S&F in repair 3 Pin Plug Top 16 Amps, 240 volt insulated bakelite body (Ivory/White) complete all as specified & directed.

S&F in repair MCB single pole 6-32 Amps, 240 volts, 10 kA rupturing capacity providing in DB complete including connection & testing all as specified & directed.

M&L and in replacement for MCB SPN 32 Amps 240 volts, 10 kA rupturing capacity providing in DB complete including connection & testing all as specified.

M&L and in replacement for MCB SPN/DP 40 to 63 Amps 240 volts, 10 kA rupturing capacity providing in DB complete including connection & testing all as specified.

M&L and in replacement for MCB TPN/FP, 40 to 100 Amps 415 volts, 10 kA rupturing capacity providing in DB complete including connection & testing all as specified.

M&L and in replacement for SPN/DP RCBO 40 Amps 240 volts, 30 mA capacity and 10 kA rupturing capacity providing in DB complete including connection & testing all as specified. Make- Havells cat part no-DHCEACSN2030040 or equivalent make mentioned in Appendix ‘B’.

M&L and in replacement for SPN/DP RCBO 32 Amps 240 volts, 30 mA capacity and 10 kA rupturing capacity providing in DB complete including connection & testing all as specified. Make - Havells cat part no-DHCEACSN2030032 or equivalent make mentioned in Appendix ‘B’.

S&F in replacement Sheet metal enclosure SPN DBs, 2 way without bus bar complete including taking out old all as specified and directed.

S&F in repairs metal clad, 2 Pin + Earth Plug Top 16 Amps, 240 volt.

Taking out existing unserviceable switch board plates any type, dismantling switches carefully, stacking at site for use of serviceable switches and supply and fixing new 3mm thick masonite laminated sheet top cover fixed on 6/8 inch x 10 inch MS box and brass screw for mounting switches, sockets, regulator etc., including making necessary electrical connection with 1.5 sqmm single core copper multi-stranded cable all as directed at site by Engineer-in-charge. Note : New Switches, sockets, fan regulators etc., if required will be measured and paid separately under relevant items.

All as per item No. 34.00 here-in-before but new 3mm thick masonite laminated sheet top cover white or ivory fixed on 6/8 inch 4 inch MS box.

All as per item No. 34.00 here-in-before but new 3mm thick masonite laminated sheet top cover white or ivory fixed on 4 inch x 4 inch MS box.

NOTES FOR ITEM NO. 9.00 to 34.00 : (a) The contractor will deploy sufficient resources for completion of day to day complaint within 24 Hrs from the time of reporting. Any delay beyond above mentioned time limit suitable penalties as mentioned in relevant clause of Contract. (b) A detailed log of complaints with completion/non-completion remarks from users/MES will be maintained by the contractor and same will be updated on daily basis in consultation with Engr-in-Charge or JE detailed by him. (c) The contractor will make suitable arrangement for emergent complaints and will notify JE/Engr-in-Charge about extraordinary circumstances for probable non-completion or delay in rectification of complaints beyond state time limit set for disposal of complaint. In case of any dispute the decision of accepting officer will be final and binding in this regard. (d) The contractor will intimate MES authority well in advance if electric shutdown is required during rectification of complaints. (e) The quoted rated deems to be inclusive of transportation, T&P and other expenses required for the resource deployment at the complaint site around scattered at AF Station Jodhpur. (f) The contractor will maintain suitable inventories and range of spares required to meet the complaints as same will be reviewed periodically by Engr-in-charge or JE detailed by him to streamline complaints disposal system.

S&F in replacement sheet metal enclosure distribution board for 240 volts, 8 way horizontal type, double door, single pole and neutral with 200 Amps rated neutral copper bus bar for housing MCB and fixed flush in wall surface, and tested on completion complete including taking out old all as directed.

S&F in replacement sheet metal enclosure distribution board for 240 volts, 12 way horizontal type, double door, single pole and neutral with 200 Amps rated neutral copper bus bar for housing MCB and fixed flush in wall surface, and tested on completion complete including taking out old all as directed.

S&F in replacement sheet metal enclosures with socket plug top, and MCBs single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB upto 20 Amps, 240 Volt capacity fixed flush to wall surface including making good to damaged surface of wall to match with existing specification and tested on completion complete including taking out old all as directed.

S&F in replacement Sheet metal enclosure distribution board TPN, 415 volts, 4 way Horizontal/vertical type as per site requirement, double door type, 200 Amps rated neutral copper bus bar for housing MCBs and including provision for fixing TPN MCB as incomer, DB fixed flush or in wall surface including making good to damaged surface of wall to match with existing specification complete including taking out old all as specified all as specified and directed. Note : MCB SP/SPN/TPN will measured and paid separately under relevant item.

Taking down carefully light fitting any type from surface/recessed/wall mounting type stacking at site for re-use or shifting unserviceable lights to store for taking credit all as directed and specified.

S&F in repair of LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

NOTES FOR LED LIGHT FITTINGS & BULBS : (i) All LED light/luminare shall meet the provision laid down in IS - 16101, 16102 Part-I/II, 16103 Part-I, 16104, 16105, 16106, 16108/2012 and 15885 Part -II / Section 13. (ii) Contractor shall submit test report of LED street light fitting from Government accredited test laboratory for LM-79 and LM-80. (iii) Contractor has to furnish a replacement warranty of 02 years for LED light fittings complete including lamps from the date of completion of contract. The product will be replaced on site free of cost in the following case :- (a) Manufacturing defects. (b) Failure due to mechanical and electrical impact. (c) Drop in lumen (or lux at 1 m) below 90% of claimed values of lumen (or lux at 1 m) of the LED /Luminaries.

M&L in repair for Sub main wiring with approved colour coding as per IS, single core FRLS PVC insulated flexible multi-stranded copper conductor 1.1 KV grade drawn through & including PVC grey conduit heavy duty with necessary accessories (like bend, junction boxes etc) including taking down old unserviceable sub-main wiring complete all as specified for following sizes of wires :- (Note : GI saddle shall be used to fix PVC conduit and distance between two saddle shall not be exceed 1.2 mtr)

Two runs of 2.5 Sq.mm main cable alongwith one run of single core 2.5 Sq.mm for continuous earth wire

Two runs of 4.0 Sq.mm main cable alongwith one run of single core 4.0 Sq.mm for continuous earth wire

Two runs of 6.0 Sq.mm main cable alongwith one run of single core 6.0 Sq.mm for continuous earth wire

Two runs of 10.0 Sq.mm main cable alongwith one run of single core 10.0 Sq.mm for continuous earth wire

Nikhat nirman

VARDHMAN SALES CORPORATION

new india engineers

Nvimal Engineers and Contractor