Repairs or Renovation of sewer lines, drainage chambers and gully traps etc inside factory area at OFMK

Amount

Cutting into existing manholes for connecting new drains of 100 mm internal dia. pipes, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required.

Cutting into existing manholes for connecting new drains of 150 mm internal dia. pipes, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required.

Cutting into existing manholes for removing existing branch drain pipes of 100 mm internal dia., making good to walling and rendering, cutting out branch channel, and making good benchings.

Cutting into existing manholes for removing existing branch drain pipes of 150 mm internal dia., making good to walling and rendering, cutting out branch channel, and making good benchings.

Cutting salt-glazed stoneware drain pipe in position of internal dia. 100 mm, including jointing socket end of new pipe to same with packed spun yarn and cement mortar l:l.

Cutting salt-glazed stoneware drain pipe in position of internal dia. 150 mm, including jointing socket end of new pipe to same with packed spun yarn and cement mortar l:l.

Site clearence in soft/loose soils

Surface dressing not exc. 15 cm deep in hard/dense soils

S & F of Sail-glazed stone ware drain pipes 100 mm internal dia. laid in trenches and jointed as specified

S & F of Sail-glazed stone ware drain pipes 150 mm internal dia. laid in trenches and jointed as specified

S & F of Salt-glazed stoneware gully traps, square or round mouthed, tvpe 'P'of size 180x150 mm.

Concrete bed with 1:3:6 type C-2 for 100 internal dia. drain pipes including forming cradles.

Concrete bed with 1:3:6 type C-2 for 150 internal dia. drain pipes including forming cradles.

Excavating in trenches, in hard / dense soils n. exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n. exc 1.5 m in depth and getting out.

Returning, filling in hard/dense soils, including spreading, levelling, watering and well ramming in layers not exc 25 cm.

Excavating in trenches, in soft / loose soils and the work in foul position, n. exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exc 10 sq m on plan and n. exc 1.5 m in depth and getting out.

Earth work in excavation for all kind of soils by mechanical means (Hydraulic excavator) means over areas(exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, as directed by Engineer-in-charge

Excavating over areas in hard/dense soils , n exc 1.5 m deep and getting out

Demolition of brick work or stone /boulder masonry built in cement mortal including all quoins, arches, pillars, etc. complete all as specified and directed by EIC

Demolition of reinforced cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) . Complete all as specified and directed by EIC

Brickwork with sub class B bricks in 1:4 cement mortar, straight or curved in plan exc. 6.0 m mean radius, built in all as specified and directed.

PLASTERING : Rendering 12mm thick on fair faces of brick work or concrete surfaces-1:4 Cement mortar - all as specified and directed.

PCC : Plain Cement Concrete (1:4:8) Type D-2 using 40 mm graded aggregate in foundations, floors, filling and mass concrete, Complete all as specified and directed .

PCC : Plain Cement Concrete (1:2:4) Type B-2 using 40 mm graded aggregate in foundations, floors, filling and mass concrete, Complete all as specified and directed .

PCC : Plain Cement Concrete (1:3:6) Type C-2 using 40 mm graded aggregate in foundations, floors, filling and mass concrete, Complete all as specified and directed .

Providing cement concrete 1:2:4 Type B-1 using 20 mm aggregate in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

precast Cement Concrete solid building blocks of grade B1, 1:2:4 mix or slabs 10cm thick setting in CM (1:4)complete , all as directed and specified

REINFORCEMENT : Mild steel(TMT) bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips. Complete all as specified and directed. .

Structural steel (S&F) : Structural steel work Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Steel confirming to Fe410W (Gde E-250 quality A). Complete all as specified directed. Steel Make : TATA or Jindal

FORM WORK : Form work to sides of concrete foundations, footings, base of columns, raft or raft beams, sides of foundations and plinth beams and similar work, vertical or batter for flat, rough finished surfaces. Complete all as specified and directed.

PVC PIPE : Supply and Fixing of 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid or fixed to walls including necessary jointin with connected accessories like "T", "Y" junctions, sockets, bends etc. complete all as directed. Make: Sudhakar/ Nandi/ Supreme.

PVC PIPE : Supply and Fixing of 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls including necessary jointin with connected accessories like "T", "Y" junctions, sockets, bends etc. complete all as directed. Make: Sudhakar/ Nandi/ Supreme.

maheshwari traders (BID ID -788558)