ADDN ALTN OF BLDG NO. BK-63, 63A AND 64 AND SPL REPAIR TO BLDG NO. BK-23, BK-69 AND BK-70 AT BHARATPUR LINES MIL STN DHARAMSHALA

Amount

Taking down chowkhats of frames n.exc 1.50 sqm with shutters (without taking off shutters from the frames) all as spd.

All as per Srl Item No 1 here-in-before, but exceeding 1.5 Sqm and n.exc 4 Sqm(without taking off shutters from the frames) all as spd.

S&F 2nd class hard wood 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass or gauge etc ( divided into squares with plain chamfered or rounded , mitred and rebated sash bars, any numbers), edges of framing plain chamfered or rounded fitted with cut and mitered beads and fitted to chowkats for securing glass/gauge size of stiles rails and other parts as per clause 8.20 (a) of SSR Part-I 1991 complete all as specified & directed.

S&F 35mm thick factory made plain framed panelled shutters of 2nd class hard wood two panel with lock rail and panel of 9mm thick BWP commercial ply. The size of rail and stile as per IS-1003 (Part-I) Kiln seasoned and chemically pressure treated factory made shutters wood is to be incorporated all as specified.

S&F pressed steel frame made out of MS sheet 1.25mm thick of size 125x 60 mm for doors/ windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc all as specified.

S&F pressed steel frame made out of MS sheet 1.25mm thick of size 105x60 mm for doors/windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc all as specified.

PCC (1:3:6) type C-1 using 20mm graded crushed stone aggregate as in back filling of chowkhat

S&F Steel window 1.25mm thick box type (Primer coated) ERW hollow P section of size 85mm x 35mm double rebated comprises gauged, glazed skelton shutter ERW Sec 50mm x 20mm and 1mm thick with two openable leaf consiting two Nos sash bar of T-Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T-section of size 30mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC M-15, type B-0 (04 No's for each window, steel duly painted with one shop coat of zinc chromate primer on prepared surfaces) and finishing the surfaces to match with existing including following fitting welded to frame shutter:- (i) Hold fast, 150mm long of 12mm x 3mm made to shape -04 Nos per window. (ii) Handle of Z section 20mm x 25mm, 100mm long -1 No per leaf. (iii) MS tower bolt 150mm long - 2 No per leaf (iv) Z section 20mm x25mm, 100 long stopper - 1 No per leaf. (v) Cleat 65mm long of hollow square 15mm x 20mm x 63mm welded to hinge -1 No per leaf. (vi) Mild steel pintle hinge of size 75mm x 12mm - 2 Nos per leaf. (vii) Flat iron fillets of size 20X3 mm for fixing wire gauge, complete all as specified & directed.

Supply and fixing steel ventilators with centre hung shutter including two pairs of brass cup pivoted catch spring and pulley wheel complete all as specified and directed by Engr in Charge.

3mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead/glazing pins in squares size n.exc 0.5 sqm in each pane all as specified and directed.

S & F aluminium alloy, anodised,sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded setion or cast aluminium alloy and fixed 250 mm long.

S & F anodised aluminium barrel tower bolt extruded section 200 mm size.

S & F anodised aluminium handle cast type 125 mm size.

S&F Aluminium anodised 100 mm long Butt hinges with galvanised mild steel screws complete.

S&F 300mm, ordinary rat tail rod pattern springs, including roller and roller plate complete, fixed in repairs all as specified and directed.

Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks, or galvanized wire staples all as specified & directed.

Preparation of new or previously untreated Steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer all as spd and directed

M&L for two coat of synthetic enamel paint over a coat of pink primer on new or previously untreated wooden based or wood Surfaces of any description, not otherwise descri-bed, over 10cm width or girth complete all as specified and directed by Engr in Charge.

Taking down cement plaster on brick walls or stone walls any descrition etc including raking out joints, hacking for key, scrubbing down with water etc all as specified and directed.

Rendering 10mm thick cement plaster on other than fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and fair without using extra cement all as specified and directed.

M&L for 15mm thick cement plaster in CM 1:4 on bricks on concrete surfaces finishing the surfaces even and smooth without using extra cement all as specified.

M&L for (non skid), premium class I grade, coloured ceramic tiles, 7 to 8mm thick (square/rectangular) area of each tile exc. 0.18 Sqm but not exc. 0.38 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bedding layer in cement mortar 1:6 complete, all as specified.

M&L non skid ceramic coloured tiles of 7 to 8 mm thick (square/rectangular) area of each tile exc 0.18 sqm but n.exc 0.38 sqm on vertical surfaces such as skirtings/dado etc., set and jointed in neat cement slurry and pointed with white or coloured cement, laid over and including 10mm thick bedding layer in cement mortar 1:4 on surfaces of walls complete all as specified.

Demolition of cement concrete in ground floors and paving, not exceeding 15cm thickness (below or above ground level), un-reinforced, complete all as specified.

Taking down cement plaster/terrazo dado/wall tiling and skirting. etc on brick or stone walls etc including racking out joints hacking for key and scrubbing down with water etc

M&L for glazed ceramic coloured tiles, premium class I grade, of size 300mm x 450mm x 7mm thick as in vertical surfaces such as skirting/dado etc., set and jointed in neat cement slurry and pointed with white or coloured cement, laid over and including 10mm thick bedding layer in cement mortar 1:4 on surfaces of walls complete all as specified.

M&L brick work with sub class 'B' bricks straight or curved on plain exc. 6m mean radius and built in CM 1:4.

Demolition of stones or brick masonry built in cement mortar including all quoins, arches etc. but excluding ashlar facing, dressed stone work etc. complete all as specified.

M&L for 15mm thick plastering in cement mortar 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified.

Rendering 10mm thick cement plaster on other than fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and fair without using extra cement all as specified and directed.

M & L PCC 1:3:6 type C2 (40mm graded ) as in plinth protection 75mm thick.

S&F 25 mm curtain rod, colour coated with wooden bracket and wooden funnel over door and window fixed with steel screw and PVC cleat complete all as specified

Preparation of plastered surface of wall by applying 1.5 mm wall care putty in two layer and making the surface smooth with sand paper and applying two coat of OBD over new/old surfaces complete all as specified & directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new /old surfaces.

RCC (Design Mix) M-25 (using 20mm graded aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

S&F TMT bars 10mm dia and over cut to length bent to shape requd incl cranking, bending, binding with incl mild steel wire (annealed) not less than 0.9mm dia complete all as specified.

All as item No. 36 above but 6 to 8mm complete all as specified.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter

Dismantling of corrugated or plain steel sheeting of any gauge thickness, including Nainital or similar pattern roof coverings all as specified and directed.

Pre pantined galvalume aluminum zinc coating GI based plain steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding fixed with self tapping screws as spd

Pre pantined galvalume aluminum zinc coating GI based corrugated steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws as spd

S&F false ceiling with fibre cement designer tile ivory painted (high pressure steam cured) of 4mm thickness (as per IS:14862) of size 595 x 595 mm and any one of the design (oceanic, lake & hill, cascade or electra) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120gms , both side inclusive ) consisting of main T runner with suitably spaced joints to get required length and 15x32 mm made of 0.30mm sheet and crosss T at 600mm c/c to form a grid including required cutting/making opening for services like diffusers, grills, light fittings, fixures, smoke detectors etc. Main T runners to be suspended from ceiling using GI soffit cleats fixed to existing rafter, purlin etc with galvanised butterfly level clips, spaced at 1200mm c/c along main T, bottom exposed width of 15mm of all T-sections shall be centra black pre-painted with polyester paint, and having a load bearing capacity of 12kg/sqm and refixed all existing electric wiring and fixture all complete at all heights as per direction of Engineer-in-Charge.

Dismantling of wall & ceiling boarding (fibre, pulp, insulation etc., or insulation board/slab/blankets, any thickness, with nails, including cover fillets and removing from site all as specified and directed.

Dismantling of framed work timber scantlings 40 Sqcm and over in section, in any position.

Material and labour for 2nd class hard wood as in scantling, framed work as in ceiling, clean swan timber and fixed in any position complete all as specified.

M&L machine cut kota stone slab flooring 18-20mm thick over cement screed base laid over 15mm screed bed in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl rubbing and polishing complete all as specified.

All as per item No 46 above but on vertical surfaces over 10 mm thick plastering in cement mortor1:4 complete all as specified.

Supply & fixing galvanized corrugated mild steel sheeting 0.63mm thick with two corrugations side lap fixed with L-type or J type hooks and washers, in roof, walls etc. with grade of zinc coating 275 gm complete all as specified and directed.

All as per item No. 48 here-in-above but except sheet.

Supply & fixing galvanized plain mild steel sheeting 0.5mm thick as in ridges, hips, valley gutters, drip and straight flashings with grade of zinc coating 275 gm complete all as specified and directed.

All as per item No. 50 here-in-above but except sheet.

M&L false ceiling using anodised aluminium T&L sections, snap grid frame work of size 600 x 600mm including hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long complete with 4mm thick non-asbestos fibre cement board ISI marked Eboard colour coated and designed, complete all as specified.

M&L mirror polishing on marble/granite/kota stone/terrazzo floor work where ever reqd finish complete.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete with fittings and fixtures such as switches, ceiling roses, pendants, regulators, socket, lamp holders brackets, bulk head fittings, tube light fittings etc removing material to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and also making good disturbed surfaces of wall, floors etc complete all as specified and directed.

M&L point wiring with 1.5 sqmm copper conductor (multi-stranded) PVC insulated and unsheathing FRLS electric cable 1100 volts cable and including PVC casing and caping of suitable size (as per conductor run) with all fittings/accessories and including PVC insulated electric cable 1100 volts 1.5 Sqmm (multistranded) copper conductor single core (Green colour) cable as continuous earth wire connected to common earth dolly including sunk sheet steel terminal box made out of 1.6mm thick MS sheet/PVC box covered with 3mm thick plastic laminated sheet (make Hylum) concealed in wall or on surface as per site requirement and making good disturbed surfaces of wall for one light point/bell point/fan point/exhaust fan point etc controlled by one, one way switch complete all as specified and directed.

All as per srl item No. 55 above, but for one 3 pin socket 5 amp on independent board complete all as specified and directed.

All as per srl item No. 55 above, but for one 3 pin socket outlet 5 amp on same board complete all as specified and directed.

All as per srl item No. 55 above, but for one socket outlet 15 amps on independent board with 2.5 sqmm copper conductor (multistranded) PVC insulated and unsheathing electric cable 1100 volts (ISI marked) including PVC insulated and unsheathed electric cable 1100 volts 2.5 sqmm copper stranded conductor as continuous earth wire connected to common earth dolly complete all as specified and directed.

Socket outlet 2 in 1, 3 pin, 5 amp and 15 amp flush type complete all as specified and directed.

Socket outlet 2 in 1, 3 pin, 5A flush type complete all as specified and directed.

Switch piano flush button 5 amps complete all as specified and directed.

Ceiling rose surface type, 65mmx50mm two to three terminals/PVC/polycarbonate, isolated body fixed on PVC block complete all as specified and directed.

S&F in replacement existing unserviceable sheet metal enclosure for DB's suitable for MCBs of single pole and neutral 08 way (double door) complete all as specified and directed. Note: (i) Connections of MCB's shall be done with appropriate size of brass/copper thimble. (ii) The disturbed surface shall be match with existing surface.

S&F in replacement 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and neutral, current carrying capacity 32 amp, in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

S&F in replacement 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 amp, in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

S&F in replacement inverter type LED light fitting 1 x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F in replacement inverter type LED street light fitting 20W, 230V, AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

M&L earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6.3mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metres below normal ground level, connecting to the galvanised iron earth lead wire 4mm dia, by means of bolts, nuts, check nuts and washers of galvanised iron and 4mm earth lead protected by provision of GI medium grade pipe 15mm bore including provision of concrete pit in PCC (1:2:4) type B-1 using 20mm graded stone aggregates with 40mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4 Kg/sqm) and frame of angle iron 25x25x6mm with lugs 2 Nos and with 6mm dia MS bar handle made to shape, GI medium grade 20mm bore pipe for watering perforated at bottom 1.75 metre long placed on top edge of earth plate, common salt and charcoal filling, test point made out of 75x50x6mm phosphorous bronze with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning filling in and removal of surplus soil to a distance not exceeding 50 metres, all as per electrical plate No. 3 of SSR-2009 Part-I and connecting to earth test point including testing on completion complete all as specified and directed.

Excavation in trenches not exceeding 1.5 m width and not exceeding 1.5 m depth and getting out for laying of pipe etc in any type of soil complete all as specified and directed.

Returning, filling of excavated soil, including spreading levelling, watering and well ramming in layers, not exceeding 25 cm in soft/loose soil complete all as specified and directed.

Removing of surplus soil to a distance n exc 50 m and depositing where directed at a level n exc 1.5m above the strating point in soft/loose soil complete all as specified and directed.

M&L sand cushioning to underground cables complete all as specified in clause 19.75 of SSR Part-I (2009) laid before and after laying of cable complete all as specified and directed.

M&L old size sub class 'B' bricks laid in trenches as cable cover complete all as specified and directed.

S&F in replacement XLPE insulated heavy duty electric power cables with multistranded aluminium conductor, 1100 volts grade of size 10 sqmm 2 core complete all as specified and directed.

Supply, fixing/laying in replacement GI pipe of size 40mm dia light grade laid in trenches/walls including clamps, screws etc. complete all as specified and directed.

M&L cutting of existing road/floor/plinth/drain for taking out/laying of UG cable through GI pipe including necessary earth work excavation and making good to match with existing surface complete all as specified with PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) complete all as specified and directed.

M&L switch piano flush type single pole one way 15 amps complete all as specified and directed.

Taking down and refixing exhaust fan and connecting up including provision of cable ceiling rose/connector to fan as directed by Engineer-in-Charge.

Deduct Credit Amount as per Schedule of credit as details given on Srl Page No 24 of tender doucments.

Eshaan Construction Co. (BID ID -3476481)

Krithvik Electricals (BID ID -3481368)