Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹78.4 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹88.1 L+₹9.7 L (12.3%)Rejected-AOC | L2 | Rejected-AOC L2 | |
| 3 | L3₹1.1 Cr+₹27.7 L (35.3%)Rejected-AOC | L3 | Rejected-AOC L3 |
Tender Value
₹89.9 L
EMD Value
₹50,000
Closing Date
4 Sept 2019, 3:00 pmClosed
Executive Engineer
O/o the Executive Engineer Electronics Division Thiruvananthapuram
Supply, Installation, Testing and Commissioning of Surveillance System at Kerala Rajbhavan, Thiruvananthapuram.
2019_PWD_293434_2
43/EEELSTVM/2019-20
Open Tender
Miscellaneous Works
Item Rate
90 days
Thiruvananthapuram
Please refer Tender documents.
9 documents required · 9 mandatory
₹5,600
online
₹50,000
Yes
17 Sept 2020
21 Aug 2019
7 Sept 2019
21 Aug 2019
4 Sept 2019
21 Aug 2019
Amount
Supply and installation of 1080P HD outdoor Bullet camera with 2.8 mm lens PoE camera with IR and pole mounting kit. 5 Years OEM on site Warranty as per the specification in the item No. 1 of Annexure. Approved Model: AXIS, Bosch, Pelco, Sony
Supply and installation of 1080P HD outdoor Varifocal lense Bullet camera with 3-10.5 mm Varifocal lens PoE camera with IR and pole mounting kit. 5 Years OEM on site Warranty as per the specification in the item No. 2 of Annexure. Approved Model: AXIS, Bosch, Pelco, Sony
Supply and installation of Outdoor 1080P PTZ Camera of 360° Pan with minimum 30X Optical Zoom, PoE .IR detection range of more than 100mtr. 5 Years OEM on site Warranty as per the specification in the item No. 3 of Annexure. Accepted Model: AXIS, Bosch, Pelco, Sony
Supply and installation of Enterprise Level rack mountable NVR with 48 Channel in-built Video Management licenses upgradeble up to 96 channel and able to load customized Video Analytic Licenses. Support a min 144 TB in-built storage. RAID 5. It should support an additional storage of minimum of 300 TB for future expansion. OEM on site Warranty for 5 Years as per the specification in the item No. 4 of Annexure. . Accepted Model : GVD, AXIS, Bosch, Pelco, Sony
Supply and installaton of High performance Digital Video Decoder loaded with video management Licenses to manage multiple play back & alarm camera controls etc for displaying the Real time view of all cameras as a multiviewer with full HD resolution in full frame rate, should support min 4 nos of professional LCD displays for 24x7 working, the 4 displays should be integrated with the system for the multiviewing of all cameras including 5 years of OEM on site warranty as per the specification in the item No 5 of Specification Chart. Approved Model : GVD, Bosch, Axis, Sony.
Supply and installation of Enterprise class Video Surveillance Hard Disk of 6TB. OEM on site warranty for 5 years as per specification in the item No. 6 of Annexure. Preferred Model: WD, Hitachi, Seagate or equivalent
Supply and installation of 55" LED Professional Display capable of working hours 24/7 with DP and HDMI port. 5 Years OEM on site Warranty as per the specification in the item No. 7 of Annexure. Preferred Model: Sony, Panasonic,LG, Samsung or equivalent
Supply and Installaion of 24" TFT LED Digital colour Monitor having Resolution 1920x1080, Aspect Ratio: 16:9, Input connector: 1 VGA, 1 HDMI. Minimum 5 years warrenty as per the specification in the item No. 8 of Annexure. Preferred Make: HP, Dell, Acer, LG or equivalent.
Supply and installation of keyboard and mouse cable extender as per specification in the item No. 9 of Annexure. Preferred Make: Kramer or equivalent
Supply and installation of high quality HDMI cable of minimum 10 mtrs. as per specification in the item No. 10 of Annexure. Preferred Make: Kramer or equivalent
Supply and installation of 64GB memory card suitable for the camera. Preferred Make: Camera make or Sandisk, kingston or equivalent
Supply and Installation of 24 port L3 managed gigabit rack mountable PoE+ switch having minimum 16 numbers of 10/100/1000 Copper Ports and 4 numbers of Giga SFP ports populated with min 4 nos of single mode SFP modules with redundant power supply and network management software. 5 Years OEM on site Warranty as per the specification in the item no. 12 of Annexure. Approved Make: Allied Telesis, Brocade, Cisco, Juniper, HP
Supply and Installation of industrial standard 10 port L2 managed gigabit rack mountable PoE+ switch having minimum 8 numbers of 10/100/1000 Copper Ports and 4 numbers of 100/1000 Giga SFP ports populated with min 1 nos of single mode SFP modules with industrial grade power supply. 5 Years OEM on site Warranty as per the specification in the item no. 13 of Annexure. Approved Make: Allied Telesis, Brocade, Cisco, HP
Supply and installation of 18 port L2 Managed gigabit rack mountable PoE+ switch with 16 x 10/100/1000T ports and min 2 numbers of 100/1000 SFP ports and necessary rackmountable kit. 5 Years OEM on site Warranty as per the specification in the item no. 14 of Annexure. Approved Make: Allied Telesis, Brocade, Cisco, Juniper, HP
Supply and Installation of Fast Ethernet to Single mode Media Converter suitable for the switch. 5 Years OEM on site Warranty as per the specification in the item no. 15 of Annexure. Preferred Make: Allied Telesis, Cisco, Belden, Brocade, Aruba or equivalent
Supply and installation of PoE injector suitable for Fixed cameras 5 Years OEM on site Warranty as per the specification in the item no. 16 of Annexure. Preferred Make: Allied Telsis, Cisco, Belden, Brocade, Aruba or equivalent
Supply and fixing of 24 port Enhanced CAT-6, fully loaded rack mountable modular type patch panel as per EIA/TIA-TSB 40A specification for interconnecting servers and clients, including termination charges. Preferred Make: Systimax, Actassi, Belden, Molex, R&M, Sterlite or equivalent.
Supply and Installation of 19" 12 port rack mountable 1U size complete Steel housing fully powder coated Light Interface Unit (LIU) with required number of SC connectors having FR grade Nylon Cable grommets, ABS Splice Trays with fully cushioned splice holder containing grooves for fixing splice protection sleeves, Cable Spools made up of flame retardant plastic, high impact resistance, stackable design for providing sufficient room for storage of excess cables, Blanking plates, necessary pigtails etc. Including splicing charges. Preferred make: - Systimax, Actassi, Belden, Molex, R&M, Sterlite or equivalent.
Supply and Installation of 19" 24 port rack mountable 1U size complete Steel housing fully powder coated Light Interface Unit (LIU) with required number of SC connectors having FR grade Nylon Cable grommets, ABS Splice Trays with fully cushioned splice holder containing grooves for fixing splice protection sleeves, Cable Spools made upof flame retardant plastic, high impact resistance, stackable design for providing sufficient room for storage of excess cables, Blanking plates, necessary pigtails etc. Including splicing charges. Preferred make: - Systimax, Molex, R&M, Sterlite or equivalent.
Supply & providing 1 Mtr CAT-6 Giga UTP patch cord. Preferred Make:- Actassi, Systimax, Belden, Panduit, Molex, R&M or equivalent.
Supply & providing SC-LC duplex patch cord 1 mtr. Preferred make:- Actassi, Systimax, Belden, Panduit, Molex, R&M or equivalent.
Supply of 32U Floor Standing aluminium server rack with front toughned glass door/rear MS door/ 1 pair of side pannels/ top and bottom cable entry with rubber grommets and Casstor's set, with SPD. Preferred Model: Valrack, Netrack, President, HCL or equivalent
Supply and fixing of out door 19” 6U pole mounting Network Rack -- Construction of material 1.2/1.5mm thick CRCA sheet, rack includes a very compact design, welded structure with front accessible. The side panels are integrated type & welded with canopy & bottom cover, rigid frame that can be fixed to the pole, Front door with filter, louver & T type lock 90 CFM, 230V AC Fan – 2 Nos, front door self adhesive thermal foam from inside, 3 socket PDU 5 Amp- 1 No, door hinges - 2nos, cable glance at bottom side for cable entry, Gasket (as per IP 55 standard), pole mounting bracket at rear side – 2 nos, hood for air inlet at front side, powder coated surface, finish: light grey. Preferred Make: D-Link, HCL, Netrack, President, Valrack or equivalent
Supply and installation of Pole with min 6mtr height,100mm diameter, fixed in a concrete footing of min height of 0.5mtr, properly finished with painting and Cable enclosure of Polystyrene, Flame resistant, Impact resistant with necessary IP65 rated Cable glands and Junction boxes for erecting the Camera and switches and having 1 meter Aluminium Alloy based lightning Arrester, clamp, wire with Graphite based Mineral compound earthing and min 250 microns copper bonded low carbon steel rod, lightning & surge protection for power supply and environment protected enclosure suitable for the termination of cables etc. OEM warranty for 2 years for lightning arrester.
Supply and Installation of Polystyrene, Flame resistant, Impact resistant Cable enclosures with necessary IP65 rated Cable glands and Junction boxes with Surge protection for the termination of Cameras mounted on the ouside wall
Supply and installation of the Mounting kit/ Cable enclosure of Polystyrene, Flame resistant, Impact resistant with necessary IP65 rated Cable glands and Junction boxes , 1 meter lightning Arrester & earthing clamp & wire, lightning protection and surge protection for power supply and environment protected enclosure suitable for the termination of cables for mounting the Cameras in the existing 5 Poles
Supply and Installation of Armored 6 Core single mode Low Water Peak Outside plant (OSP) OFC having LSZH sheath, conforming to ITU-T G.655, IEC 60794-1 : 2001, IS 13882 (Part 1/Sec 1) : 1999 etc. Preferred Make:- Commscope, Molex, R&M, Sterlite or equivalent.
Supply, laying, certification and documentation of weather proof Armored CAT-6 outdoor 23AWG UTP cable. Preferred Make: Actassi, Belden, Panduit,R&M, or equivalent
Supply and installation of 32mm HDPE Pipe conforming to IS14930 part II along with all required accessories in the existing trench for mechanical protection to existing OFC Cables
Supply and drawing of 3 core 2.5sq.mm PVC insulated & PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections for providing power supply to all Network switches and Cameras wherever necessary. Preferred Model: Finolex/Havel or equivalent
Supply and fixing ≥100mm x ≥50mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4578 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required. Accessories including External angle 90⁰, Flat Angle 90⁰/TEE, Internal Angle 90⁰, Internal Coupler, Flat cross, End Cap, Flanged Coupler, Joint cover, Cable Retainer, Wall plate for internal angle etc. Preferred Make : OBO, MK, Legrand, Precision or equivalent
Supply and fixing 50mm x 50mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4578 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required. Accessories including External angle 90⁰, Flat Angle 90⁰/TEE, Internal Angle 90⁰, Internal Coupler, Flat cross, End Cap, Flanged Coupler, Joint cover, Cable Retainer, Wall plate for internal angle etc. Preferred Make : OBO, MK, Legrand, Precision or equivalent
Supply and fixing 25mm size of medium guage PVC ivory Conduit conforming to IS 9537 / 1983 part III along with all required accessories on surface/recess including making good the damages etc as required for drawing of cables Preferred Make : Toms, Balco, Espee or equivalent
Supply and fixing 20mm size of medium guage PVC ivory Conduit conforming to IS 9537 / 1983 part III along with all required accessories on surface/recess including making good the damages etc as required for drawing of cables. Preferred Make : Toms, Balco, Espee or equivalent.
Supply and fixing 20mm size of PVC flexible Conduit conforming to IS 9537 / 1983 part III along with all required accessories on surface including making good the damages etc as required for drawing of cables
Excavation for cable trenches in soft soil, depth upto 1.2m including dressing of sides lift upto 1.5m, including getting out the excavated soil, refilling with sand and or good soil after laying of cable/ pipe etc. in layers of 20 cm, ramming, watering and disposal of surplus excavated soil as directed, within a lead of 50 meters.
Supply, Installation, Testing and Commissioning of 6KVA line interactive UPS with one hour battery back up on full load with necessary rack for keeping the battery. 5 Years OEM on site Warranty Preferred Make:- APC, Eaton, Emerson, Numeric or equivalent
Supply, Installation, Testing and Commissioning of 3KVA line interactive UPS with one hour battery back up on full load with necessary rack for keeping the battery. 5 Years OEM on site Warranty Preferred Make:- APC, Eaton, Emerson, Numeric or equivalent
Supply, Installation, Testing and Commissioning of 1KVA line interactive UPS with one hour battery back up on full load with necessary rack for keeping the battery. 5 Years OEM on site Warranty Preferred Make:-APC, Eaton, Emerson, Numeric or equivalent
Supply and Installation of necessary Electrical accessories for the distribution of UPS power from the Control room to the cameras, Network switches etc in structured way, including necessary MCB, Sockets,Switches, ELCBs, Electrical PVC boxes etc and all other switch gear with necessary accessories and suitable wall mounting powder coated metal bracket for mounting fixed Cameras and fixing of keystone enlosure loaded with modules at the camera ends
Integration, Configuration, Testing, commissioning, Documentation and Training charges and technical support for 5 years
Oneview Systems
BUSINESS INTELLIGENCE GROUP
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .