Loading
Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹4.0 L
Closing Date
30 Jul 2026, 9:30 pm4d left
Karnataka Industrial Areas Development Board
Assistant Executive Engineer-Ele
08022265383
Providing street lights & shifting of re-routing of HT/LT line at left out roads and newly formed roads at 4th & 5th Phase of Avverahalli Industrial Area, Bengaluru Rural District
KIADB/2026-27/EL/WORK_INDENT483
KIADB/2026-27/EL/WORK_INDENT483
Open
Electrical
Two Tender Document System(Two Cover)
KIADB Head Office Bangalore
3 documents required · 3 mandatory
To qualify for award of this contract, each Tenderer in its/his name should have in the last five years period i.e. (2021-22 to 2025-26) Achieved in at least two financial years a minimum financial turnover of Rs.528.00 Lakhs. (Electrical Contract Works Only) (Not less than 2 times the amount put to tender).
To qualify for award of this contract, each Tenderer in its/his name should have in the last five years period i.e. (2021-22 to 2025-26) Satisfactory completed (at least 90% of the contract value), as a prime contractor, at least One Similar Work such as Providing Street lights, to an extent of not less than 50% of the amount put to tender (i.e., Rs.132.00 lakhs)
Executed in any one financial year, the following minimum quantities of work (Supply & Erection) (80% quantity of work put to tender): Certificates of proof shall be enclosed from competent Authority not below the rank of Executive Engineer in Government / Public Sectors/Government Undertaking Organizations. (Quantities executed certificates issued under Joint Venture shall not be considered). (1) LTUG/HTUG cable of (16sqmm & above): 12.18 Km, (2) 8/9mtr long Streetlight pole/ RCC Pole: 244 Each, (3) LED street lights fittings- 150W: 302 Each
Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under: Assessed available tender capacity: (AxNx1.5 - B), where, A: Maximum value of Electrical engineering works executed in any one year during the last five years (updated to 2026-27 price level) taking into account the completed as well as works in progress. N: Number of years prescribed for completion of the works for which tenders are invited. B: Value, at 2026-27 price level, of existing commitments and on-going works to be completed during the next 06 Months.
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
Each Tenderer should further demonstrate: liquid assets and /or availability of credit facilities of not less than Rs.79.00 lakhs (Credit lines/ letter of credit/ certificates from Public sector banks/Nationalized Banks (as per RBI guidelines) not less than 30% of the amount put to tender for meeting the fund requirement etc)
Reports on the financial standing of the tenderer, such as profit and loss statements and auditors reports for the last five years
List of Financial Resources with Certificates
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
₹5,000
₹4.0 L
17 Jul 2026
17 Jul 2026
31 Jul 2026
24 Jul 2026
24 Jul 2026
Providing street lights & shifting of re-routing of HT/LT line at left out roads and newly formed roads at 4th & 5th Phase of Avverahalli Industrial Area, Bengaluru Rural District
Supplying of 1.1kV LTUG Heat Resistant PVC Insulated Cables as per IS-1554 (Part-1) 1998 with
following parameters & as per BESCOM
(1) H2/H4 grade Aluminium Conductor
having purity of 99...
Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers with all lead and lifts complete as per specifications and directions of the engineer in charge 2.5...
Cable trench excavation in Ordinary soil with all lead and lifts complete as per specifications and directions of the engineer in charge
Refilling and consolidation with all lead and lifts complete as per specifications and directions of the engineer in charge
Laying of UG cables by Trench less technology (HDD) by adopting horizontal boring & drawing of cable including preparation at site with all lead and lifts complete as per specifications and directions...
Supplying and Fixing GI Pipe B - Class as per IS-1239 with all lead and lifts complete as per specifications and directions of the engineer in charge 50mm
Fabricating supplying and mounting MS box made out 18 SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped...
Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N.F. screws with all lead and lifts compl...
Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. flat … with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint wi...
Supplying and drawing Flexible Multicore Cable manufacturedwith electrolytic grade flexible copper with low conductorconfirming to IS 8130-1984 and (Virgin) PVC insulation heathedsuitable for working ...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers with all lead and lifts complete as per specifications and directions of the ...
Providing Earthing materials pipe type for grounding (Single Electrode with accessories) with all lead and lifts complete as per specifications and directions of the engineer in charge
Supply & fixing of LT AC 3 Phase 4 Wire, 5-30 Amps DLMS Complaint Energy Meter, 1.0 Accuracy Class (Used for LT-2, LT-3 & LT-5 Installations up to 25HP/18KW) with all lead and lifts complete as per sp...
Fabricating, supplying and erection of ... ms long hot dip Galvanized Octagonal hot dip Pole with BSEN 10025 gradeS355 JO steel plate for shaft, IS2062 for base plate with door opening arrangements, i...
Fabricating, supplying and erection of ... ms long hot dip Galvanized Octagonal hot dip Pole with BSEN 10025 gradeS355 JO steel plate for shaft, IS2062 for base plate with door opening arrangements, i...
Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on conical pole using necessary bolts, nuts etc., with all lead and lifts complete as per specific...
Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on conical pole using necessary bolts, nuts etc., with all lead and lifts complete as per specific...
Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Co...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyc...
Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clA, bolts, nuts and wiring using suitable capacity wires with all lead and lifts complete as per...
Supply of Heavy Duty Copper Terminal Long Barrel 25 Sqmm Copper Terminal, Apprx Wt: 11 with all lead and lifts complete as per specifications and directions of the engineer in charge of the work
Supplying and fixing of 3 pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring with AC-3 Rating and as per IS-13947 with all lead and...
Supplying and fixing micro processor based electronic timer (without contactor Din mounting using necessary bolts, nuts and washers etc.,) 3 -120 Sec setting with all lead and lifts complete as per sp...
Supplying & Fixing minature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF energy cross-3 with short circuit breaking capaci...
Supplying & Fixing minature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF energy cross-3 with short circuit breaking capaci...
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws,bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Ov...
Supply and Fixing of PVC Pipe as per IS-2509 PVC PVC Pipe - 32 mm Dia with all lead and lifts complete as per specifications and directions of the engineer in charge of the work.
Supply and laying HDPE Pipe 50/42mm with all lead and lifts complete as per specifications and directions of the engineer in charge of the work.
Intelligent Light Monitoring System (ILMS) for street lights consisting of supply and erection of single phase / three phase smart streetlight control and monitoring system to remotely control and mon...
Providing DP structure:
Supplying of DP structure using 9 Mtr long 145kg WL RCC poles with all lead and lifts complete as per specifications and directions of the engineer in charge of the work.
Supply of RCC Pole - 8 Mtr Long, 115 Kg WL with all lead and lifts complete as per specifications and directions of the engineer in charge of the work. for Stud
Supply of 11KV 400 amps GOS double break with all lead and lifts complete as per specifications and directions of the engineer in charge of the work.
Supply of ‘H’frame for mounting GOS 11KV 400A Double break with all lead and lifts complete as per specifications and directions of the engineer in charge of the work.
Supply of 11KV 70/90KN disc insulator with all lead and lifts complete as per specifications and directions of the engineer in charge of the work.
Supply of Guy set complete with No. 15 strain insulator with all lead and lifts complete as per specifications and directions of the engineer in charge of the work.
Supply of spiral earth electrodes with all lead and lifts complete as per specifications and directions of the engineer in charge of the work.
Supply of 11 kV 45KN polymeric pin insulator with GI pins with all lead and lifts complete as per specifications and directions of the engineer in charge of the work.
supply of Strain Clamp, 3 Bolt type for 70/90 kN Disc Insulator with all lead and lifts complete as per specifications and directions of the engineer in charge of the work.
Supply of PG clamps Coyote conductor with all lead and lifts complete as per specifications and directions of the engineer in charge of the work.
Supply of Fish Plate with necessary Clamps, bolts & nuts etc complete (Galvanised) with all lead and lifts complete as per specifications and directions of the engineer in charge of the work.
Supply and fixing Anti - climbing device 12 Mtrs barbed wire with all lead and lifts complete as per specifications and directions of the engineer in charge of the work.
Supply and fixing caution/board with all lead and lifts complete as per specifications and directions of the engineer in charge of the work.
Supply of Earthing materials pipe type for grounding (Single Electrode with accessories) with all lead and lifts complete as per specifications and directions of the engineer in charge of the work.
Erection of DP structure using 9 Mtr long RCC poles 145kg WL with all lead and lifts complete as per specifications and directions of the engineer in charge of the work.
Erection of RCC Pole - 8 Mtr Long, 115 Kg W for Stud with all lead and lifts complete as per specifications and directions of the engineer in charge of the work.
Fixing Guy set complete with No. 15 strain insulator with all lead and lifts complete as per specifications and directions of the engineer in charge of the work.
Fixing spiral earth electrodes with all lead and lifts complete as per specifications and directions of the engineer in charge of the work.
Fixing of 11 KV 400 A GOS double break with all lead and lifts complete as per specifications and directions of the engineer in charge of the work.
Fixing of ‘H’ frame for mounting 11 KV 400A GOS double break with all lead and lifts complete as per specifications and directions of the engineer in charge of the work.
Making of Earthing materials pipe type for grounding (Single Electrode with accessories) with all lead and lifts complete as per specifications and directions of the engineer in charge of the work.
Extension of 11KV O/H line:
Supply of RCC Pole - 9 Mtr Long, 145 Kg WL with all lead and lifts complete as per specifications and directions of the engineer in charge of the work.
Supply of 11 kV, Horizontal Cross Arm with clamps, HTST supports, bolts, nuts and washers for RCC Pole - 9 Mtr Long, 145 Kg WL with all lead and lifts complete as per specifications and directions of ...
Supply of 11KV 45KN polymeric insulator. with all lead and lifts complete as per specifications and directions of the engineer in charge of the work.
Supply of 11 kV, 5 kN Polymeric Pin Insulator (24 mm dia FRP Rod)with all lead and lifts complete as per specifications and directions of the engineer in charge of the work.
Supply of Guy Set Complete with No. 15 Strain Insulator with all lead and lifts complete as per specifications and directions of the engineer in charge of the work.
Supply of Spiral Earth Electrode with all lead and lifts complete as per specifications and directions of the engineer in charge of the work.
Supply of Rabbit ACSR Conductor with all lead and lifts complete as per specifications and directions of the engineer in charge of the work.
Supply of Coyote ACSR Conductor with all lead and lifts complete as per specifications and directions of the engineer in charge of the work.
Supply of PG clamp for Rabbit conductor with all lead and lifts complete as per specifications and directions of the engineer in charge of the work.
Erection of 9mtr long RCC Pole of 145kg WL with all lead and lifts complete as per specifications and directions of the engineer in charge of the work.
Fixing of 11 kV, Horizontal Cross Arm with clamps, HTST supports, bolts, nuts and washers for RCC Pole - 9 Mtr Long, 145 Kg WL with all lead and lifts complete as per specifications and directions of ...
Fixing of Guy Set Complete with No. 15 Strain Insulator with all lead and lifts complete as per specifications and directions of the engineer in charge of the work.
Fixing of Spiral Earth Electrode type earthing (without charcoal, salt etc.,) with all lead and lifts complete as per specifications and directions of the engineer in charge of the work.
Stringing of Rabbit ACSR conductor binding of conductor on each insulator and dead ending on strain or disc/strain insulator by means of clamps with all lead and lifts complete as per specifications a...
Stringing of Coyote ACSR conductor binding of conductor on each insulator and dead ending on strain or disc/strain insulator by means of clamps with all lead and lifts complete as per specifications a...
Providing Spun pole structure:
Supplying of Pre-Stressed Tubular Spun Pole - 11 Mtr Long, 500 Kg WL with all lead and lifts complete as per specifications and directions of the engineer in charge of t...
Supply of 11 kV, Horizontal Cross Arm with clamps, HTST supports, bolts, nuts and washers for RCC Pole - 9 Mtr Long, 145 Kg WL with all lead and lifts complete as per specifications and directions of ...
Supply of 11KV 45KN polymeric insulator with all lead and lifts complete as per specifications and directions of the engineer in charge of the work.
Supply of 11 kV, 5 kN Polymeric Pin Insulator (24 mm dia FRP Rod) with all lead and lifts complete as per specifications and directions of the engineer in charge of the work.
Supplying of Three H Frame without Transformer Seating and Seating angle support cross arm for 11 M Spun Pole for 63/100/250/500kVA (UG cable) - MS with all lead and lifts complete as per specificatio...
Supply of 11KV 400 amps GOS double break with all lead and lifts complete as per specifications and directions of the engineer in charge of the work.
Erection of Pre-Stressed Tubular Spun Pole - 11 Mtr Long, 500 Kg WL with all lead and lifts complete as per specifications and directions of the engineer in charge of the work.
Concreting materials for 11 Mtrs Spun Pole a) Base concreting 1:2:4, 1000x1000x150 mm b) Pole concreting 1:2:4, 1000x1000x2500 mm c) Coping 1:2:4 (as per actuals) with all lead and lifts complete as...
Providing 3Cx400sqmm HTUG cable:
Supplying of 11kV, 3 Core HTUG XLPE Insulated
Cables as per IS-7098 (Part-2) 2011 with
following parameters & as per BESCOM
(1) Insulation manufactured t...
Supplying of Heat Shrinkable Outdoor Type Cable Termination Kit for XLPE Cable with all lead and lifts complete as per specifications and directions of the engineer in charge of the work. 3Cx400sqmm
Supplying of Heat Shrinkable Straight Through Jointing Kit for XLPE Cable with Copper Lug & Al Ferrule 3Cx400sqmm with all lead and lifts complete as per specifications and directions of the engineer ...
Supplying of 150mm dia GI pipe for drain crossing and cable raising with all lead and lifts complete as per specifications and directions of the engineer in charge of the work.
Laying of UG cable by Trench less technology (HDD) by adopting horizontal boring and drawing of cables including preparation at site with all lead and lifts complete as per specifications and directio...
Supply of artificial/manufacture sand for spreading and forming alround the UG cable with all lead and lifts complete as per specifications and directions of the engineer in charge of the work.
Supplying of cable covering tiles of 250x150x40mm or 125x125x40mm with all lead and lifts complete as per specifications and directions of the engineer in charge of the work.
Cable trench excavation in Ordinary soil with all lead and lifts complete as per specifications and directions of the engineer in charge of the work.
Supplying of route and joint indicating stone connected with MS anchor rods with all lead and lifts complete as per specifications and directions of the engineer in charge of the work.
Laying of high tension 11 KV(E) 3 core 400 sqmm in existing trench/GI pipe/stone ware/RCC Hume pipe using wooden aluminum rollers with all lead and lifts complete as per specifications and directions ...
Making and fixing for 11 KV(E) 3 Core 400 sqmm heat shrinkable type cable terminations (indoor / out door). 3X300 to 3X400 sqmm with all lead and lifts complete as per specifications and directions o...
Making and fixing for 11 KV (E) 3 core 400 sqmm heat shrinkable type straight through joint with all lead and lifts complete as per specifications and directions of the engineer in charge of the work.
Laying the GI pipe with all lead and lifts complete as per specifications and directions of the engineer in charge of the work.
Spreading and forming with sand all round the cable to a depth of 75mm and width of 500mm (does not iclude cost of sand) with all lead and lifts complete as per specifications and directions of the en...
Covering the cable with tiles with all lead and lifts complete as per specifications and directions of the engineer in charge of the work.
Releasing Portion :
Releasing and re-erection of 9 Mtr RCC poles with all lead and lifts complete as per specifications and directions of the engineer in charge of the work.
Releasing & re-stringing of Rabbit ACSR conductor with all lead and lifts complete as per specifications and directions of the engineer in charge of the work.
Releasing & re-fixing of horizontal cross arms with all lead and lifts complete as per specifications and directions of the engineer in charge of the work.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Avverahalli Bid document.pdf
Tender Document • 1.36 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].