Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.2 LAccepted-AOC | ₹4.2 L | L1 | Accepted-AOC Lowest bid |
| 2 | L2₹4.5 LRejected-Finance | ₹4.5 L | L2 | Rejected-Finance Highest bid |
| Sl No | Description | Qty | Unit | SHAHARIYAD T L1 | Shameer K L2 |
|---|---|---|---|---|---|
| 1.00Retarring | |||||
| 1.00 | 5.5.A.1a:Modified Penetration Macadam 50 mm thick using Bitumen S-65 Construction of penetration macadam over prepared base by providing a layer of compacted crushed coarse aggregate using chips spreader with alternate applications of bituminous binder and key aggregates and rolling with a three wheel 80-100 kN static roller to achieve the desired degree of compaction as per Technical Specification Clause 506. | 37.83 | sqm | 295.49 ₹11,178.39 | 300 ₹11,349 |
| 1.00 | 5.5.B.2a:Modified Penetration Macadam 75 mm thick using Bitumen S-65 Construction of penetration macadam over prepared base by providing a layer of compacted crushed coarse aggregate using chips spreader with alternate applications of bituminous binder and key aggregates and rolling with a three wheel 80-100 kN static roller to achieve the desired degree of compaction as per Technical Specification Clause 506. (B) 75 mm thick :- (II) Bitumen (S-65) | 27.32 | sqm | 382.21 ₹10,441.98 | 400 ₹10,928 |
| 1.00 | 5.2.1a:Tack Coat Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503. | 900 | sqm | 13.73 ₹12,357 | 15 ₹13,500 |
| 1.00 | 5.11.1.A.2a:Mix Seal Surfacing - Manual Means - Type A - Bitumen S-65 Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.9 mm (Type-A) or 13.2 mm to 0.9 mm (Type-B) aggregates using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per Technical Specification Clause 509 By Manual Means :- Type A (II) Bitumen (S-65) | 900 | sqm | 275.36 ₹2.5 L | 300 ₹2.7 L |
| 1.00 | OD531301/2024-2025:surface dressing of the ground including removing vegetation and inequalities not exceeding 15cm deep and disposal of rubbish lead up to 50cm lift up to 1.5 m. All kinds of soil | 136 | sqm | 29.2 ₹3,971.20 | 30 ₹4,080 |
| 1.01 | OD531303/2024-2025:providing plain cement concrete for road work cc1:2:4 (1cement:2fine aggregate : 4 course aggregate ) laid to required slope and camber inpanies as required slope and camber in size of course aggregate not exceeding 25mm, mixed in concrete mixer etc. completes per specification (1)nominal mix (1:2:4) | 16.32 | cum | 8,446.62 ₹1.4 L | 8,500 ₹1.4 L |
Tender Value
₹4.2 L
EMD Value
₹10,591
Closing Date
17 Jul 2025, 6:00 pmClosed
AE
LID EW Section Valanchery Municipality
Pro no 565 25 RETARING AND SIDE CONCRETING TO PADINJAKKARA THANIKKULAMB ROAD Pro no 565 25 in ward 29
2025_LSGD_775060_1
01 2025 26 AE LID EW VLRY I PHASE
Open Tender
Civil Works - Roads
180 days
Valanchery
Please refer Tender documents.
7 documents required · 7 mandatory
₹935
Yes
₹10,591
Yes
26 Dec 2025
10 Jul 2025
19 Jul 2025
10 Jul 2025
17 Jul 2025
10 Jul 2025
Amount
Retarring
5.5.A.1a:Modified Penetration Macadam 50 mm thick using Bitumen S-65 Construction of penetration macadam over prepared base by providing a layer of compacted crushed coarse aggregate using chips spreader with alternate applications of bituminous binder and key aggregates and rolling with a three wheel 80-100 kN static roller to achieve the desired degree of compaction as per Technical Specification Clause 506.
5.5.B.2a:Modified Penetration Macadam 75 mm thick using Bitumen S-65 Construction of penetration macadam over prepared base by providing a layer of compacted crushed coarse aggregate using chips spreader with alternate applications of bituminous binder and key aggregates and rolling with a three wheel 80-100 kN static roller to achieve the desired degree of compaction as per Technical Specification Clause 506. (B) 75 mm thick :- (II) Bitumen (S-65)
5.2.1a:Tack Coat Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503.
5.11.1.A.2a:Mix Seal Surfacing - Manual Means - Type A - Bitumen S-65 Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.9 mm (Type-A) or 13.2 mm to 0.9 mm (Type-B) aggregates using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per Technical Specification Clause 509 By Manual Means :- Type A (II) Bitumen (S-65)
OD531301/2024-2025:surface dressing of the ground including removing vegetation and inequalities not exceeding 15cm deep and disposal of rubbish lead up to 50cm lift up to 1.5 m. All kinds of soil
OD531303/2024-2025:providing plain cement concrete for road work cc1:2:4 (1cement:2fine aggregate : 4 course aggregate ) laid to required slope and camber inpanies as required slope and camber in size of course aggregate not exceeding 25mm, mixed in concrete mixer etc. completes per specification (1)nominal mix (1:2:4)
Shameer K (BID ID -2253389)
Bidder Name
SHAHARIYAD T
Shameer K
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid