J&K

Active

Works

Repair and Maintenance Works

Repairs to various Snow Machines viz. Snow Cat 15 (Farmtrac), Snow Cat 60 HP (Sonalika), Snow Cat 9010 (Holland), and Snow Machine 74 (LPT 715) of Mechanical and Hospital Sub-Division 1st Anantnag.

Public Works Department

Mechanical and Hospital Sub Division 1st Anantnag | Anantnag, Jammu And Kashmir

Amount: ₹51,400Closes: 9 Oct 20267d left

Timeline

Published1 Oct 2026
Closes9 Oct 2026
Bid Opening10 Oct 2026

Tender Value

₹51,400

EMD Value

₹1,030

Closing Date

9 Oct 2026, 2:00 pm7d left

Tender Inviting Organisation

Name

Executive Engineer

Address

Office of the Executive Engineer Mechanical and Hospital Division Anantnag

Work Description

Repairs to various Snow Machines viz. Snow Cat Sonalika 60 HP, Snow Cat 23, LRV, GURU 01, Snow Cat 22 (Preet), Snow Cat 28, Snow Cat 30 and Snow Cat 24 (Preet 90 HP) of Mechanical and Hospital Sub-Division 1st Anantnag.

Tender Information

Tender ID

2026_PWDJK_326786_5

Reference Number

MHDA/TS/2026-27/64

Tender Type

Open Tender

Product Category

Repair and Maintenance Works

Form of Contract

Percentage

Period of Work

10 days

Location

Mechanical and Hospital Sub Division 1st Anantnag

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Refer NIT

Documents Required

7 documents required · 7 mandatory

Fee/PreQual/Technical

RequiredScanned copy of Tender Document Cost as per NIT (.pdf)

RequiredScanned copy of Earnest Money Deposit as per NIT (.pdf)

RequiredScanned copy of GST registration, latest form GSTR-3B and PAN Card as per NIT (.pdf)

RequiredScanned copy of Accepted/Confirmed of Annexures of NIT (.pdf)

RequiredScanned copy of contractors registration card on JKPWDOMS as per NIT (.pdf)

RequiredScanned copy of proof of having executed mechanical nature of works as per NIT (.pdf)

Finance

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹200

Tender Fee Payable To

Executive Engineer M and H Division Anantnag

EMD Fee Amount

₹1,030

Important Dates

Last Activity

1 Oct 2026

Published

1 Oct 2026

Bid Opening

10 Oct 2026

Download Starts

1 Oct 2026

Download Ends

9 Oct 2026

Submission Starts

1 Oct 2026

Bill of Quantities

PercentageBoQ_Ver4.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (11 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Snow Cat SONALIKA 60HP
1.01	P/F of starter/ignition switch along with replacing the start/stop solenoid switch with mechanical spring loaded start/stop type mechanism by way of removing the old damaged starter switch and solenoid and replacing the dameged parts with new parts as mentioned above. All the consumables and parts required are in the scope of the part.	1	job	3,500	₹3,500
1.02	Blade side repairs :Repair to the V-blade assy. by way of dismantling the blade assy. From the machine then cutting of the rear horizontal support brackets 02 no's of the blade by way of gas cutting and shifting it inwards towards the nose of the blade by 8'' and replacing the vertical support channels 02 no's by ISMC 100 L-1000mm 02 no's by way of cutting and welding. the job also includes provinding and welding of 04 no's gusset plates of size 250 x160mm between the vertical and horizontal support brackets. Further the job includes repairing of the curved blade profile by way of gas heating, hammering & patch welding where-ever necessary to smoothen out the blade profile.	1	job	6,500	₹6,500
2	Snow Cat 23 Welding of the base of hydraullic Jack with the Hydraullic cylibder base plate by firstly removing the defected one and re-welding of the same spot. The job also includes dismantling of rear wheel of the machine and then denting/straightening of the wheel rim .Inflating the tyre is also in scope of contractor.	1	job	1,400	₹1,400
3	Hydra Crane Repairs to the radiator by way of dismantling it and unclogging its choked tubes using hydrochloric acid and thereafter washing with water. Plugging of Leakages by means of Welding/Soldering wherever required. Also P/F of Rubber pad-02 no's, Radiator cap-01 no, Nuts & bolts-06 no's, connection hose inlet & outlet at different points to avoid leakage. Complete job includes cost of material and labour charges (skilled and unskilled) including of all taxes	1	job	4,500	₹4,500
4LRV
4.01	Repair/Strengthening to the front suspension system of vehicle by way of dismantling the both leaf spring assembly RHS and LHS from vehicle one by one then retensioning of leaf spring to increase the curvature P/F of bushes-04 no's U-CLMAP -02no CENTRE BOLT -02 no’s reassemble it back on vehicle and testing and The job includes cost of materials, labour charges and all taxes	1	job	8,000	₹8,000
4.02	Repair/Strengthening to the Rear suspension system of vehicle by way of dismantling the all leaf spring assembly from vehicle one by one then retensioning of leaf spring to increase the curvature. P/F of new extra leaf spring-02 no’s ( 01 on each leaf spring assembly) along with replacement of bushes-04 no's U-CLAMP -02no CENTRE BOLT -02 no’s reassemble it back on vehicle and testing and The job includes cost of materials, labour charges and all taxes	1	job	12,000	₹12,000
5	GURU 01 Brazing of hydraulic cylinder (extend ) Flow Port	1	job	700	₹700
6	Snow Cat 22 Preet P/F of heavy duty metal bracket (cultivator Nakka) with hole of lever gear .The job also includes denting /straightening of the H-Frame of Cutting Edge.	1	job	800	₹800

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.59 MB

Work Item Documents

BOQ_1105461.xls

BOQ • 0.32 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Snow Cat SONALIKA 60HP
1.01	P/F of starter/ignition switch along with replacing the start/stop solenoid switch with mechanical spring loaded start/stop type mechanism by way of removing the old damaged starter switch and solenoid and replacing the dameged parts with new parts as mentioned above. All the consumables and parts required are in the scope of the part.	1	job	3,500	₹3,500
1.02	Blade side repairs :Repair to the V-blade assy. by way of dismantling the blade assy. From the machine then cutting of the rear horizontal support brackets 02 no's of the blade by way of gas cutting and shifting it inwards towards the nose of the blade by 8'' and replacing the vertical support channels 02 no's by ISMC 100 L-1000mm 02 no's by way of cutting and welding. the job also includes provinding and welding of 04 no's gusset plates of size 250 x160mm between the vertical and horizontal support brackets. Further the job includes repairing of the curved blade profile by way of gas heating, hammering & patch welding where-ever necessary to smoothen out the blade profile.	1	job	6,500	₹6,500
2	Snow Cat 23 Welding of the base of hydraullic Jack with the Hydraullic cylibder base plate by firstly removing the defected one and re-welding of the same spot. The job also includes dismantling of rear wheel of the machine and then denting/straightening of the wheel rim .Inflating the tyre is also in scope of contractor.	1	job	1,400	₹1,400
3	Hydra Crane Repairs to the radiator by way of dismantling it and unclogging its choked tubes using hydrochloric acid and thereafter washing with water. Plugging of Leakages by means of Welding/Soldering wherever required. Also P/F of Rubber pad-02 no's, Radiator cap-01 no, Nuts & bolts-06 no's, connection hose inlet & outlet at different points to avoid leakage. Complete job includes cost of material and labour charges (skilled and unskilled) including of all taxes	1	job	4,500	₹4,500
4LRV
4.01	Repair/Strengthening to the front suspension system of vehicle by way of dismantling the both leaf spring assembly RHS and LHS from vehicle one by one then retensioning of leaf spring to increase the curvature P/F of bushes-04 no's U-CLMAP -02no CENTRE BOLT -02 no’s reassemble it back on vehicle and testing and The job includes cost of materials, labour charges and all taxes	1	job	8,000	₹8,000
4.02	Repair/Strengthening to the Rear suspension system of vehicle by way of dismantling the all leaf spring assembly from vehicle one by one then retensioning of leaf spring to increase the curvature. P/F of new extra leaf spring-02 no’s ( 01 on each leaf spring assembly) along with replacement of bushes-04 no's U-CLAMP -02no CENTRE BOLT -02 no’s reassemble it back on vehicle and testing and The job includes cost of materials, labour charges and all taxes	1	job	12,000	₹12,000
5	GURU 01 Brazing of hydraulic cylinder (extend ) Flow Port	1	job	700	₹700
6	Snow Cat 22 Preet P/F of heavy duty metal bracket (cultivator Nakka) with hole of lever gear .The job also includes denting /straightening of the H-Frame of Cutting Edge.	1	job	800	₹800

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Snow Cat SONALIKA 60HP

1.01

P/F of starter/ignition switch along with replacing the start/stop solenoid switch with mechanical spring loaded start/stop type mechanism by way of removing the old damaged starter switch and solenoid and replacing the dameged parts with new parts as mentioned above. All the consumables and parts required are in the scope of the part.

job

3,500

₹3,500

1.02

Blade side repairs :Repair to the V-blade assy. by way of dismantling the blade assy. From the machine then cutting of the rear horizontal support brackets 02 no's of the blade by way of gas cutting and shifting it inwards towards the nose of the blade by 8'' and replacing the vertical support channels 02 no's by ISMC 100 L-1000mm 02 no's by way of cutting and welding. the job also includes provinding and welding of 04 no's gusset plates of size 250 x160mm between the vertical and horizontal support brackets. Further the job includes repairing of the curved blade profile by way of gas heating, hammering & patch welding where-ever necessary to smoothen out the blade profile.

job

6,500

₹6,500

Snow Cat 23 Welding of the base of hydraullic Jack with the Hydraullic cylibder base plate by firstly removing the defected one and re-welding of the same spot. The job also includes dismantling of rear wheel of the machine and then denting/straightening of the wheel rim .Inflating the tyre is also in scope of contractor.

job

1,400

₹1,400

Hydra Crane Repairs to the radiator by way of dismantling it and unclogging its choked tubes using hydrochloric acid and thereafter washing with water. Plugging of Leakages by means of Welding/Soldering wherever required. Also P/F of Rubber pad-02 no's, Radiator cap-01 no, Nuts & bolts-06 no's, connection hose inlet & outlet at different points to avoid leakage. Complete job includes cost of material and labour charges (skilled and unskilled) including of all taxes

job

4,500

₹4,500

4LRV

4.01

Repair/Strengthening to the front suspension system of vehicle by way of dismantling the both leaf spring assembly RHS and LHS from vehicle one by one then retensioning of leaf spring to increase the curvature P/F of bushes-04 no's U-CLMAP -02no CENTRE BOLT -02 no’s reassemble it back on vehicle and testing and The job includes cost of materials, labour charges and all taxes

job

8,000

₹8,000

4.02

Repair/Strengthening to the Rear suspension system of vehicle by way of dismantling the all leaf spring assembly from vehicle one by one then retensioning of leaf spring to increase the curvature. P/F of new extra leaf spring-02 no’s ( 01 on each leaf spring assembly) along with replacement of bushes-04 no's U-CLAMP -02no CENTRE BOLT -02 no’s reassemble it back on vehicle and testing and The job includes cost of materials, labour charges and all taxes

job

12,000

₹12,000

GURU 01 Brazing of hydraulic cylinder (extend ) Flow Port

job

700

₹700

Snow Cat 22 Preet P/F of heavy duty metal bracket (cultivator Nakka) with hole of lever gear .The job also includes denting /straightening of the H-Frame of Cutting Edge.

job

800

₹800