New Building Construction of Veterinary Polyclinic, Aravalli at Limbhoi Ta. Modasa

Bill of Quantities

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

1 Excavation for foundation upto 1.5 m depth including 387.00 Cum 122.99

sorting out and stacking of useful materials and disposing

off the excavated stuff upto 50 Meter lead.(A) Loose or soft

2 Excavation for foundation upto 1.5 m depth including 670.00 Cum 157.08

sorting out and stacking of useful materials and disposing

off the excavated stuff upto 50 Meter lead.(B) Dense or

3 Excavation for foundation for depth from 1.5 m to 3.0 m 179.00 Cum 170.40

including sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter lead.(B)

Dense or Hard soil

4 Filling available excavated earth (excluding rock) in 1026.00 Cum 136.92

trenches. plinth, sides of foundations etc. in layers not

exceeding 20 cm. in depth consolidating each disposited

layer by ramming and watering.

5 Filling in plinth with sand under floors including watering 182.00 Cum 481.81

ramming, consolidating and dressing complete

6 Filling in foundation and plinth with murrum or selected soil 383.00 Cum 294.39

in layers of 20cm. thickness including watering, ramming

and consolidating etc. complete.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

7 Providing and laying controlled cement concrete M.150 for 381.00 Cum 4339.97

curing complete including cost of formwork but excluding

the cost of reinforcement for reinforced concrete work in (A)

Foundations, footings,Base of columns and Mass concrete

8 Providing and laying controlled cement concrete M.250 and 317.00 Cum 4755.89

curing complete including cost of formwork but excluding

the cost of reinforcement for reinforced concrete work in (A)

Foundations, footings, Base of columns and Mass concrete.

9 Providing and laying controlled cement concrete M250 and 28.00 Cum 7697.21

curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced concrete

work in Columns, pillars posts and struts Column Up to

10 Providing and laying cement concrete 1:4:8 (1- Cement : 4- 38.00 Cum 3024.35

coarse sand : 8- Machine Crushed stone aggregates 40 mm

nominal size) and curing complete excluding cost of

formwork in (A) Foundation and Plinth

11 Providing and laying controlled cement concrete M.250 and 114.00 Cum 6001.42

curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced concrete

work for Ground and Plinth Beams

12 Brick work using common burnt clay building bricks having 83.00 Cum 4214.33

crushing strength not less than 35 kg./Sq.Cm. in foundation

and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand)

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

13 Providing and laying controlled cement concrete M.200 and 56.00 Cum 7614.05

curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced concrete

work in Columns, Pillars posts and struts, For All Floors.

14 Providing and laying controlled cement concrete M.200 and 91.00 Cum 5986.20

curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced concrete

work in Beams For All Floors.

15 Providing and laying controlled cement concrete M.200 and 146.00 Cum 6465.51

curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced concrete

work in Slab for All Floors.

16 Providing and laying controlled cement concrete M.200 and 15.00 Cum 6376.93

curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced concrete

work in Lintels For All Floors.

17 Providing and laying controlled cement concrete M.200 and 12.00 Cum 6949.03

curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced concrete

work in Chajja For All Floors.

18 Providing and laying controlled cement concrete M.200 and 4.00 Cum 6856.54

curing complete excluding the cost of formwork and

reinforcement for reinforced concrete work in (E) Staircases

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

19 Providing TMT Bar FE 500D reinforcement for R.C.C. 71840.00 Kg. 77.29

work including bending, binding and placing in position

complete for All Floor

20 Providing throating or plaster drip and moulding to R.C.C. 126.00 Rmt 43.08

Chhajja by making 5mm to 15mm wide grove as per design

21 Brick work using Common Burnt Clay building bricks 331.00 Cum 4495.99

having crushing strength not less than 35 kg./Sq.Cm. in

Super structure Above plinth level up to All Floor levels in

Cement Mortar 1:6 (1- Cement : 6 -fine sand)

22 Half brick masonry in common burnt clay building bricks 109.00 Sqmt 684.20

having crushing strength not less than 35 Kg/Sq.Cm. in

Superstructure above plinth level upto All Floor level in

Cement mortar 1:4 (1- Cement : 4 -coarse sand )

(Conventional).

23 Providing & Fixing Chicken mesh for joint between brick 187.00 Sqmt 173.72

work & RCC work fixing with nail & GI washer as per

director in charge

24 Providing 15mm thick cement mala plaster in single coat on 2423.00 Sqmt 241.38

Rough (Similar)side of single or half brick walls for interior

plastering and finished even and smooth fininshing with a

floating coat of neat cement slurry in (i) Cement mortar 1:3

(1-cement:3-sand), 10x10 mm groves etc. Complete for All

25 Providing 10mm thick cement mala plaster in single coat on 1440.00 Sqmt 215.30

brick/concrete walls for interior plastering and finished even

and smooth fininshing with a floating coat of neat cement

slurry in (i)Cement mortar 1:3 (1-cement:3-sand). Complete

for All Floors.

26 20mm thick sand faced cement plaster with Gutka Finish on 796.00 Sqmt 321.10

walls upto height 15 metres above ground level consisting of

12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand)

and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-

sand) with 5mm grooves, etc. complete.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

27 Applying two coats of putty & two coats of primer of 3758.00 Sqmt 40.59

approved brand and manufacture on new wall surface to give

an even shade including thoroughly brushing the surface free

from mortar dropping and other foreign matter and sand

papered smooth.

28 Wall painting (three coats) with plastic emulsion paint of 2318.00 Sqmt 125.52

approved brand and manufacture on undecorated wall

surface to give an even shade including throughly brushing

the surface free from mortar droppings and other foreign

matter and sand papered smooth.

29 Ceiling painting (three coats) with plastic emulsion paint of 1440.00 Sqmt 131.02

approved brand and manufacture on ceiling and soffits of

slab surface to give an even shade including throughly

brushing the surface free from mortar droppings and other

foreign matter and sand papered smooth.

30 Finishing wall with weather proof exterior emulsion paint 901.00 Sqmt 93.93

(two coats) with Damp Proof Coating (one coat) on wall

surface to give an required shape even shade after

thoroughly brushing the surface to remove all dirt, and

remains of loose powdered materials.etc complete

31 Providing and laying Hand Dressed Rough Kota stone slab 483.00 Sqmt 966.57

flooring over 20mm (Average) thick base of cement mortar

1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty

:1.5 - coarse sand) laid over and jointed with grey cement

slurry mixed with pigment to match the shade of slab

including rubbing and polishing etc. complete. (A) 25mm

32 Providing and laying Hand Dressed Rough kota stone slab 167.00 Sqmt 1115.04

25mm thick in risers of steps,skirting Dedo and pillars laid

on 10mm thick cement mortar 1:3 (1-Cement : 3 coarse

sand) and jointed with gray cement slury mixed with

pigment to match the shade of slab including rubbing and

polishing etc. complete.

33 Providing and fixing pre-cast Rubber Dye / steel Dye inter 441.00 Sqmt 706.93

locking concrete block 60mm thick with grade of concrete

M300 pnumatic compressed / vibrated mechanically and as

per approved design Confirming to IS 15658 :

including 35 mm Sand layer for levelling and filling the joint

with sand in proper line and level as per guidlines of IRC :

SP 63-2018 etc. Complete.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

34 Providing and fixing Machine cut & Polished kota stone in 122.00 Sqmt 2515.91

7.5 cm width Strip flooring for Ramp even grade over 20mm

(Average) thick base of cement mortar 1:6 (1-cement : 6-

coarse sand) laid over and jointed with grey cement slurry

mixed with pigment to match the shade of slab including

rubbing and polishing etc. complete. (A) 25mm thick

35 P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 345.00 Sqmt 1346.35

mm (average) base of cement mortar 1:6 ( 1 cement:

coarse sand) on new surface or fixing on existing flooring by

adhesive material including dismentaling of existing

flooring and jointed with color cement slurry including

finised with flush pointing & cleaning the surface etc.

complete for DARK shade

36 Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 37.00 Sqmt 1195.02

24'' in skrting risers of steps and dedo on 10mm thick

cement plaster 1:3 (1-cement : 3-coarse sand) and jointed

with white cement slurry

37 P & L 24" x 24" Matt Finished Antiskid Ceramic 10 mm 23.00 Sqmt 1266.54

thick tile flooring over 20 mm (average) base of cement

mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or

fixing on existing flooring by adhesive material including

dismentaling of existing flooring and jointed with color

cement slurry including finised with flush pointing &

cleaning the surface etc. complete

38 Providing and laying coloured glazed tiles of the size 300 132.00 Sqmt 1487.88

mm x 450 mm x 8 mm in skirting, risers of steps and dedo

on 10 mm. thick cement plaster 1:3 (1 cement : 3 coarse

sand) & jointed with white cement slurry.

39 Providing and fixing Machine cut, Free edges, Mirror 42.00 Sqmt 2464.40

Polished Granite stone slab flooring 18mm thick laid on

20mm (Average) thick base of cement mortar 1:6 (1-cement

: 6-coarse sand) for Trade & Riser including Half Round

moulding front edge of trade jointed with grey cement slurry

mixed with pigment to match the shade of slab including

rubbing and polishing etc. complete.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

40 Providing and fixing Machine cut, Free edges, Polished 124.00 Sqmt 2510.86

Green Granite stone slab flooring 18mm thick for vertical

wall/Doors/Windows Sill, Jams for cladding as per design

including full moulded round inside edge and laid on10mm

thick base of cement mortar 1:3 (1-cement : 3-coarse sand)

jointed with grey cement slurry mixed with pigment to

match the shade of slab including rubbing and polishing etc.

41 Providing and laying water prooofing treatment with china 1028.00 Sqmt 1132.21

mosaic tiles flooring over avg 50 mm C.C. 1:2:4 bedding

maintaining slope for plain and curve surface & 12 mm to

20 mm broken pieces not more than 2.5 cm of ceramic/ of

glazed tiles to be laid over cement mortar 1:3 to plain or

slope and to be tempered to bring mortar creme out upto

surface using white cement including rounding off junctions

and extending them upto 15 cm along the wall,clearing with

water and oxalic acid etc. as directed.

42 Constructing Sandwich Platform of 18mm thick polished 18.00 Sqmt 2760.33

black or selected granite at top and 25 mm thick kota stone

with 75cm height with necessary support using 20mm thick

cement mortar 1:3 for sandwich and fitting at bottom &

edges with waterproof rigid adhesive including making

necessary grooves in walls with vertical support of double

kota stonr sandwich every 60cm centre to centre including

all labour material of approved quality including full

moulded round front edge fixed in wall for partition.

43 Providing and fixing flush door with Single shutters, solid 80.00 Sqmt 4129.89

core construction with frame of first class hardwood with

cross board and finished with 1 mm thick laminate on both

side of shutter, machine glued PVC beading on periphery

including 30cm long Stainless Steel Pipe handle on both

side SS ASIS 304 grade, SS Stopper 20cm, SS Aldrop 30cm

both side, anodised alluminium butt hinges with necessary

screws. (B) Non-decorative type and block board core

anodised alluminium butt hinges in flush door shutters (2)

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

44 Providing and fixing flush door with Double shutters, solid 9.00 Sqmt 5279.27

core construction with frame of first class hardwood with

cross board and finished with 1 mm thick laminate on both

side of shutter, machine glued PVC beading on periphery,

including 30cm long Stainless Steel Pipe handle on both

side SS ASIS 304 grade, heavy duty Floor Spring each side,

SS Stopper 20cm, SS Aldrop 30cm both side, anodised

alluminium butt hinges with necessary screws. (B) Non-

decorative type and block board core anodised alluminium

butt hinges in flush door shutters (2) 35 mm thick.

45 Providing and fixing window having extruded aluminum 44.00 Sqmt 1738.21

Colour anodized section frame main outer size 95mm x

24mm x 1.17mm @ wt.of 0.738 Kg/mt , horizontal Three

track member size 92mm x 31.75mm x 1.30mm,@ Wt.1.07

Kg/mt , vertical member of size 92mm x 31.75mm x

1.50mm @ Wt. 1.06 Kg/mt with sliding shutters of

horizontal member size 40 mmx18mm x1.29mm @ wt.of

0.456 Kg/mt, vertical member of size 40mm x 18mm x

mm @ wt.of 0.456Kg/mt/ with 5 mm thick transparent

bronze colour tinted float glass with rubber gasket and

airlock strip anodiazed aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as per details

etc. With Mosquito net shutter in outer track.

46 Providing and fixing window having extruded aluminum 22.00 Sqmt 1713.70

Colour anodized section frame main outer size 63.50 x

38.10 x 1.95 mm,@ Wt 1.094 Kg / Rmt, horizontal two

track member size 61.85 mm x 31.75 mm x 1.20mm @

wt.of 0.695 Kg/mt, vertical member of size 61.85 mm x

31.75mm x 1.30 mm @ wt.of 0.659 Kg/mt with sliding

shutters of horizontal member size 40mm x 18mm x

1.29mm @ wt.of 0.456Kg/mt, vertical member of size

0.457 Kg/mt with 5 mm thick transparent bronze colour

tinted float glass with powder coated aluminum fittings and

fixtures and transparent silicon sealant glass fixing to frame

as per details etc complete for window.

47 Providing and fixing Standard extruded colour anodized 5.00 Sqmt 1368.55

alluminium section frame weight 1.094 kg/Rmt.with

Adjectable Glass Louvers of 5 mm thick transparent glass

colour tinted float glass with transparent silicon gasket with

allu. Powder coated fittings & fixtures.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

48 Providing upto floor two level precast cement concrete jali 124.00 Sqmt 776.08

or grill 1:2:4 mix (1- Cement : 2- coarse sand : 4-graded

stone aggregate 6mm nominal size) reinforced with 1.6 mm

dia. Mild steel wire including roughening,cleaning, fixing

and finishing in cement mortar 1:3 and curing complete.

49 Providing and fixing rolling shutters of approved make 36.00 Sqmt 3554.40

made of 80 mm wide M.S. laths inter-locked together

through their entire length and jointed together at the ends

by end locks mounted on specially designed pipe shaft with

bracket plates, guide channels and arragements for inside

and outside locking with push-pull operation including the

cost of hood cover and spring etc. complete.(A) Shutters

having width below 3.5 M.

50 SIGNAGES ON DOOR :Providing and fixing 304 grade 35.00 Nos. 1262.50

stainless steel 1.5mm thick brushed steel finish plate fixed

on a door using S.S studs and with punched (laser cut)

lettering carried out on S.S plate of required size and text as

directed by engineer etc. complete. Size 30 cm x 15 cm

51 Providing erecting and fixing double coated ISI water tank 10000.00 Litre 3.95

of required capacity each with all necessary fittings and

connection etc. complete on terrace

52 Providing, laying and jointing in true line and level 110 407.00 Rmt 876.11

diameter U.P.V.C (Type B) conforming to IS 13592-1992

with one end plain and other end socketed with rubber ring,

& fittings conforming to ISI 14735-1999 of approved make

for drainage system pipe line, pipe shall be jointed with each

other with rubber lubricant, pipe shall be fixed on wall using

of PVC clamp of the size 110 mm diametre x 149 mm

length x 145 mm heigh at every 2000 mm center to center or

shall be concealed in walls as directed including necessary

fittings such as bends, shoes etc. including testing of pipes

and joints and jointed with adhesive solvent cement

including cost of all materials.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

53 Providing, laying and jointing in true line and level 160 50.00 Rmt 834.38

diameter U.P.V.C (Type B) conforming to IS 13592-1992

with one end plain and other end socketed with rubber ring,

& fittings conforming to ISI 14735-1999 of approved make

for drainage system pipe line, pipe shall be jointed with each

other with rubber lubricant, pipe shall be fixed on wall using

of PVC clamp of the size 160 mm diametre x 210 mm

length x 196 mm heigh at every 2000 mm center to center or

shall be concealed in walls as directed including necessary

fittings such as bends, shoes etc. including testing of pipes

and joints and jointed with adhesive solvent cement

including cost of all materials.

54 Providing laying and jointing in true line and level 50mm 100.00 Rmt 195.67

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two metre

C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all

55 Providing laying and jointing in true line and level 25mm 75.00 Rmt 91.84

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two metre

C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all

56 Providing laying and jointing in true line and level 15mm 300.00 Rmt 72.65

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two metre

C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all

57 Providing and fixing concealed center point to wall ceiling 90.00 Rmt 253.82

& floor CPVC (SDR 13.5) PIPE having National Sanitation

Foundation (NSF) seal for potable water of following dia.

nominal bore tube fittings and clamps including making

good the wall, ceiling and floor etc. complete. 25 mm.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

58 Providing and fixing concealed center point to wall ceiling 50.00 Rmt 170.36

& floor CPVC (SDR 13.5) PIPE having National Sanitation

Foundation (NSF) seal for potable water of following dia.

nominal bore tube fittings and clamps including making

good the wall, ceiling and floor etc. complete. 15 mm.

59 Providing and fixing Gun metal check or non-return fullway 6.00 Nos. 420.63

wheel valve.(C) 25mm dia.

60 Providing and fixing ball cock of approved. quality as 1.00 Nos. 189.84

directed.(A) Copper Metal (ii) 50mm dia.

61 Providing and fixing wash down water closet (Wall Hung 5.00 Nos. 5172.51

type, W.C. Pan) with integral P or S trap, Health Fauset

Heavy Duty with hook and PVC dual flush tank with

complete fittings including jointing the trap with soil pipe in

Cement Mortar 1:1 (1-Cement : 1-fine sand) (Seal and cover

to be measured and paid for separately)(A) vitreous China

Pattern :(i) in white colour

62 Providing and fixing Urinal or approved quality including 3.00 Nos. 1074.86

conecting the Urinal with waste pipe , tap etc. complete.(A)

White earthenware flat back or corner type size 430mm x

63 Providing and fixing washbasin (ii) Flat Back washbasin 5.00 Nos. 2180.72

550 mm x v 400mm size. (i) In white colour including with

approved sanitary grade material with CP waste coupling,

waste pipe, 15mm dia Pillar & Stop Cock of approved brand

with connection 15mm dia flexiable pvc pipe etc. complete

64 Providing and fixing Kitchen sink with C.I. or M.S. 11.00 Nos. 2987.87

brackets, painted white including cutting holes in walls (C)

Vitreous China Sink.(i) 600mm x 450mm x 150mm size

including approved sanitary grade material with CP waste

coupling, waste pipe, 15mm dia Pillar & Stop Cock of

approved brand with connection 15mm dia flexiable pvc

pipe etc. complete

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

65 Providing and fixing screw down bib taps of following 5.00 Nos. 186.83

size.(A) Brass screw down bib tap polished bright. (i) 15mm

66 Providing and fixing PVC SWR Nahni trap IS 14735 for 20.00 Nos. 586.60

drain - 100 mm diameter with jali of the following nominal

diameter of self cleansing design with C.I scread down or

hinged grating including the cost of cutting and making good

67 Providing and fixing S.W. gully trap with C.I. grating brick 5.00 Nos. 1246.92

masonry chamber and water tight C.I. cover with frame of

300mm x 300mm size (inside) with standard weight.(i)

Square mouth traps.(B) 150mm x 100mm size P or R type

68 Providing and fixing C.P. brass towel rail comlete with C.P. 5.00 Nos. 616.42

brass brackets fixed to wooden plugs with C.P. brass

scews.(B) 600mm x 20mm size.

69 Providing and fixing 600mm x 450mm bevelled edge mirror 5.00 Nos. 859.41

of superior glass mounted on 6mm thick A.C. sheet or

plywood sheet and fixing to wooden pluge with C.P. brass

screws and washers.

70 Providing and fixing in position PVC cowel went to pipes 13.00 Nos. 75.75

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

71 Constructing brick masonry chamber for underground C.I. 5.00 Nos. 3660.76

Inspection chamber and bends with bricks having crushing

strength not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with

frame (Light duty) 455mm x 610mm intenal dimensions

total weight of cover with frame to be not less than 38Kg.

(Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top

slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded

stone aggregate 20mm size) foundation concrete 1:5:10

inside plaster 15mm thick with cement mortar 1:3 finished

smooth with a floating coat of neat cement on walls and bed

concrete etc. complete.(ii) Inside dimensions 500mm x

mm and 450mm deep for pipe line with one or two inlets.

72 Providing and laying (to level or slopes) and jointing with 50.00 Rmt 531.18

stiff mixture of Cement Mortar in proportion 1:1 Salt glazed

stoneware pipes including testing of pipes and joints

complete and Providing and laying Cement concrete 1:5:10

(1-Cement : 5-Fine sand :10-Graded stone aggregate 40mm

nominal size) bedding for stoneware pipes of following

internal diameters with necessary formwork and curing

complete.(B) 150mm dia.

73 Providing and laying (to level or slopes) and jointing with 50.00 Rmt 352.73

stiff mixture of Cement Mortar in proportion 1:1 Salt glazed

stoneware pipes including testing of pipes and joints

complete and Providing and laying Cement concrete 1:5:10

(1-Cement : 5-Fine sand :10-Graded stone aggregate 40mm

nominal size) bedding for stoneware pipes of following

internal diameters with necessary formwork and curing

complete.(A) 100mm dia.

74 Applying general insecticide pest control treatment to floors, 1473.00 Sqmt 80.62

cupboards etc including labour materials etc. complete.

Using Imidacloprid 30.5 SCas Per IS 6313 part -II( (0.075%

concentration by mass) is recommended 10.5ml chemical

diluted with 5 liters of water application 0.5 litre chemical

/Sqm of surface is recommended as per I.S.

75 Providing and fixing Safety Grills of required pattern for 1495.00 Kg 112.72

windows/door using MS polished bars, Rectangular CRS

Pipes of size 50mm x 30mm x 2mm or Required at required

spacing as per design and hold fast with coach bolts

including one coat of and two coats of matt finished oil

painting etc. complete

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

76 Providing and fixing a set of wall mounted 38mm dia. U 1.00 Nos. 2323.00

shaped horizontal stainless steel collapsible grab bar, 38mm

vertical stainless steel fixed grab rail of grade SS 304 from

round pipe supported and 75mm dia 8mm thick SS 304 base

flange on wall including anchor fastners, nuts, accessories as

per detailed drawing etc. complete as directed by architect or

engineer in charge.

77 Providing and fixing 90 cm high Stainless Steel railing made 109.00 Rmt 3357.04

from anticorrosive 304 grade S.S. pipe of 50 mm dia. (16

gauge) as hand rail with S.S.304 grade baluster of 32 mm

dia (16 gauge) as a vertical support fixed in RCC Slab/ steps

of stair at 1.2 mt. c/c including three horizontal S.S. pipes of

16 mm dia (16 gauge) at equal distance fixed by 16 mm dia

(16 gauge) S.S. pipe with baluster including accessories as

per detailed drawing as directwed etc. complete

78 Providing & Fixing in position 300 to 150mm high 49.00 Nos. 757.50

English/Gujarati letters made from 1.0mm thick stainless

steel sheet as directed by the Engineer in charge with all

material, hardware, accessories and fittings etc. complete.

79 Providing and laying controlled cement concrete M.150 and 4.00 Cum 7426.53

curing complete excluding the cost of formwork and

reinforcement for reinforced concrete work for Coping

80 Providing & laying weep hole in Aburtments, and returns by 105.00 Each 86.73

using A.C. pipe of 100mm including laying in proper grede

and jointing the completed as per detailed specification.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

81 Providing and fixing concertina coil fencing with punched 70.00 Rmt. 565.60

tape concertina coil 600 mm dia 10 mt openable length

having 50 no rounds per 6 mt length, upto 3mt height of wall

with existing angle iron (50mm x50mm x5mm )requird

shaped As per Directed Engeenier in charge. placed 2.4mt or

3.00mt apart and with 4 horizontal R.B.T. reinforced barbed

wire(3 mm) , stud tied with G.I. staples and G.I. clips to

retain horizontal, including necessary bolts or G.I.barbed

wire tied to angle iron, all complete as per direction of

Engineer-in-charge, with reinforced barbed tape

(R.B.T.)/Spring core (2.5 mm thick) and weight

gm/meter at compound wall for ESR M4/intakewell.

82 Steel work, welded in built up sections framed work 108.80 Quintal 5006.32

including cutting, hoisting, fixing in position and applying a

priming coat of red lead paint. (A)In beams and joists,

channels angles Tees, flats, with connecting plates or angle

cleats as in main and cross beams. Hip and jack rafters,

purlins conneted to common rafters and the like

83 Painting two coats (excluding priming coat) on external 21.00 Sqmt. 22.75

surface of new rain water, soil, waste and vent pipes and

fittings with ready mixed bituminous brushing, black,

anticorrosive to give an even shade including cleaning of

all dirt, dust and other foreign matter. (B) 75mm dia.

84 Drilling of pilot bore hole of size 250/300 mm diameter at 200.00 Rmt 1544.29

above site by mud finish direct rotary rig etc. complete

85 Reaming of 250/300 mm diameter pilot bore hole to size 150.00 Rmt 742.35

450 mm diameter including assembling, lowering housing,

casing strainer pipes with gravel packing and clay ball

packing etc. complete.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

86 Providing 600 CFM / 150 PSI capacity air compressor upto 1.00 Job 25118.70

available of sand free discharge ( Minimum 6.0 Hours)

87 Supply of reducer made frim 6 mm thick plate (M.S.) for 1.00 Nos. 2009.90

ERW pipe of size (ii) 200 mm dia. x 250 mm dia. X

88 Supply of 200 mm diameter V-wire screen pipe of slot size 75.00 Rmt 1401.88

1.0 mm nominal hole etc. complete.

89 Supply of M.S. Bore clamps with 3 holes on either side with 1.00 Pair 1753.36

nuts and bolts of standard make and suitable size (g)

mm x 75 mm x 16 mm flat to 200 mm dia. Pipe.

90 Supply of Bore Plug having 100 mm height made from M.S. 1.00 Nos. 834.26

plate with 3 holes at equal distance on circumference for

nuts-bolts type, locking arrangement with nut-bolts & lock

nuts of standard make complete. (b) from 5 mm thick M.S.

plate (for top also) (ii) suitable for 200 mm dia. pipe.

91 Supply of M.S. Bail Plug having length of 0.45 mtr from 1.00 Nos. 907.99

medium class pipe as per I.S.S. suitable for (b) 200 mm

diameter pipe etc. complete.

92 Supply of Steel Bent plates suitable to ERW pipe for (b) 200 8.00 Nos. 71.71

mm diameter and 150 x 150 x 6 mm size etc. complete.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

93 Supply of Gravel of size selected size up to 4mm to 6 mm, 6.00 Cmt 2295.73

including stacking and filing etc. complete.

94 Charges for uptron make Electrologger (with carting ) of 1.00 Job 12120.00

pilot bore hole etc. complete.

95 Charges for Geo Hydrological ground water investigation 5.00 Job 16160.00

including water sample chemical analysis etc. complete.

96 S.I.T.C. submersible pump set suitable for bore of 150 mm 1.00 Each 49148.62

dia or more having 3 phase motor capacity not less than

HP with following capacity. Lifting and Lowering taken

extra. [C] 25 stage 160 to 100 LPM discharge at 185 to

mtr head for 50 mm dia delivery pipe

97 Providing and erecting PVC corrugated Flexible conduit 125.00 Rmt 26.26

with required numbers of coupling, PVC bushes, Check-nuts

etc. complete of following sizes. (3) 32 mm diameter

98 Lowering of submersible motor pump set complete with 1.00 Job 2568.43

required. Nos. and size of casing pipes erected by means of

proper chain pulley block & pipe wrenches after checking of

threads of each pipe with coupling to take the load of the

pump set and pipe assembly filled up with water. (B) Above

60 mtr and up to 120 mtr

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

99 Supplying and erecting approved make motor control 1.00 Each 8710.24

cubical panel (Direct - on - line) made from 16 G. CRCA

sheet duly epoxy powder painted inside and outside with

hinged doors and locking, arrangement consisting of suitable

size of ON-OFF isolator (AC - 3/23 duty) main fuses, single

phasing preventer, indicating lamps for R-Y-B phases,

overload relay, automatic water level controller, Ammeter,

Voltmeter each with two way selector switch incoming,

wires duly socket crimped, main contactor & overload relay,

start-stop push buttons, to be erected on angle iron frame

grouted on wall as directed. The isolator, overload relay &

contactors will be of L&T, Seimens or BCH make only (a)

DOL upto 7.50 H.P.

100 Supplying and erecting XLPE (IS:7098) (I)-88 ISI 150.00 Rmt 136.35

unarmoured copper cable 1.1 KV grade to be erected as

directed of following size. (E) 3 core 2.5 Sq. mm

101 Providing laying and jointing in true line and level 50mm 150.00 Rmt 195.67

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two metre

C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all

materials. and fixing butterfly valve of IS approved brand

102 Providing 2.00 Nos. 1595.80

103 Excavation for foundation for depth from 1.5 m to 3.0 m 6.00 Cum 287.47

including sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter lead.(C)

104 Providing and laying polished Kota stone slab flooring over 9.00 Sqmt 1019.00

20mm (Average) thick base of cement mortar 1:6 (1-cement

: 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse

sand) laid over and jointed with grey cement slurry mixed

with pigment to match the shade of slab including rubbing

and polishing etc. complete. (A) 25mm thick

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

105 Providing and fixing window having extruded aluminum 2.00 Sqmt 1583.95

Colour anodized section frame main outer size 95mm x

24mm x 1.17mm @ wt.of 0.738 Kg/mt , horizontal Three

track member size 92mm x 31.75mm x 1.30mm,@ Wt.1.07

Kg/mt , vertical member of size 92mm x 31.75mm x

1.50mm @ Wt. 1.06 Kg/mt with sliding shutters of

horizontal member size 40 mmx18mm x1.29mm @ wt.of

0.456 Kg/mt, vertical member of size 40mm x 18mm x

mm @ wt.of 0.456Kg/mt/ with 5 mm thick transparent

bronze colour tinted float glass with rubber gasket and

airlock strip anodiazed aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as per details

106 Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M. 5.00 Nos 958.17

size having weight not less than 35Kg.

107 Clearing and grubbing road land including uprooting rank 1.00 Hectare 28455.09

vegetation grass bushes, shrubs, sapling and trees girth up to

300 mm removal of stumps of trees cut earlier and disposal

of unserviceable materials (C) By mechanical means in area

of light jungle

108 Earthwork in cuting in all sorts of soil and soft murrum 26.00 Cum 134.20

including conveying and spreading the stuff, embankment as

and where directed within 200meters from the end of the

cutting with all required lead and lift.

109 Earthwork for embankment including breaking clods, 3320.00 Cum 131.93

dressing with all lead and lift (including watering and

consolidation)(A) From Borrow pits within land width

110 Rolling and consolidation of soling including filling in 4500.00 Sqmt. 22.75

depression which occur during the process, with power roler

8 tonne to 12 tonne..

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

111 Box cutting the road surface to proper slope and camber for 556.00 Cum 109.05

making a base for road work including removing the

excavated stuff and depositing on the road side slope as

directed upto 50Mt.lead.

112 Construction of B.I.T.C. granular sub base by providing 223.00 Cum 1022.88

granular material of Grading II, spreading in uniform layers

with motor grader on prepared surface , mixing by mix in

place method with front end loader at OMC , and

compacting with vibratory roller to achieve the desired

density ,complete as per Clause

113 Providing, laying, spreading and compacting stone 162.00 Cum 1336.41

aggregates of specific sizes to water bound macadam (Grade-

II) (B.T. Metal of size 45 to 63 mm) specification including

spreading in uniform thickness, hand packing, rolling with

wheeled steel/ vibratory roller in stages to proper grade and

camber, applying and brooming requisite type of screening/

binding Materials to fill up the interstices of coarse

aggregate, watering and compacting to the required density.

114 Compaction and finishing of cement concrete road by trimix 1008.00 Sqmt. 72.72

process providing extra labour charges for the trimix vaccum

dewatering service process on cement concrete road surface

by using vaccum dewatering pump floater surface vibrator

including making rough finish to surface as per in including

levelling the complete.

115 Supplying and fixing reinforced concrete heavy duty non- 15.00 Rmt. 659.99

pressure pipes with collars for culverts carrying heavy traffic

as per IS 458-1991 specifications including setting the pipes

in C.M. 1:2 watering and laying (to level or slopes) of class

NP3 of following internal daimeters.(i) 300mm dia.

116 Supplying and fixing reinforced concrete heavy duty non- 10.00 Rmt. 5560.01

pressure pipes with collars for culverts carrying heavy traffic

as per IS 458-1991 specifications including setting the pipes

in C.M. 1:2 watering and laying (to level or slopes) of class

NP3 of following internal daimeters.(vii) 1200mm dia.

117 Constructing Brick masonry road gully chamber 500mm x 6.00 Nos. 2017.19

450mm x 600mm including 500mm x 450mm C.I.

horizontal grating wih frame complete.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

118 Providing and fixing 'W' type safety barrier using M.S. iron 50.00 Rmt. 3421.88

channel 150mm x 75m x 5mm size erected at 2.0 Mt. center

to center and providing 'W' shaped galvanised steel sheet

guard rail 3mm thick for crash barrier in single row as per

detailed drawing with fabrication and installation charges

including providing foundation block of size 0.60 x 0.60 x

0.75 Mt. in C.C. 1:2:4 and oil painting two coats with one

coat of red oxide etc complete.

119 Providing and fixing pre-cast concrete kerb stone of gray 140.00 Rmt 404.05

cement based concrete block 30cm length,30cm height and

15cm thick of M200 grade concret as per approved design

and including excavation for fixing in proper line and

Level,filling the joint with C:M 1:3 (1cement:3fine sand) etc

120 Supplying of yellow or Goradu soil with all lead and lift 75.00 Cum 505.00

including spreading watering dressing and rolling with hand

roller etc complete selected soil

121 Supplying of well rotted FYM manure with all lead and lift 4.00 Cum 378.75

including spreading mixing dressing and rolling with hand

roller etc. complete

122 Scarifying the surface of soil including spreading of DAP 500.00 Sqmt. 26.26

fertilizer mixing with soil properly leveling ground dressing

123 Supplying and planting Dibbling semi carpet lawn at 500.00 Sqmt. 90.90

distance of about 15 cm x 15 cm after proper anti termite

treatment and rolling the same by hand roller and watering

124 Bowling and developing flowering plants grown in nursery 9.00 Nos. 505.00

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Bottom Palm

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

125 Bowling and developing flowering plants grown in nursery 5.00 Nos. 656.50

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Triangle Palm

126 Bowling and developing flowering plants grown in nursery 9.00 Nos. 80.80

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Jasud

127 Bowling and developing flowering plants grown in nursery 10.00 Nos. 85.85

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Croton

128 Bowling and developing flowering plants grown in nursery 5.00 Nos. 85.85

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Croton

129 Bowling and developing flowering plants grown in nursery 10.00 Nos. 70.70

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Croton Petra

130 Bowling and developing flowering plants grown in nursery 15.00 Nos. 40.40

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Croton Petra Live Plant

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

131 Bowling and developing flowering plants grown in nursery 5.00 Nos. 101.00

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Golden Durenta Varigated

132 Bowling and developing flowering plants grown in nursery 5.00 Nos. 85.85

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Crotons Variety

133 Bowling and developing flowering plants grown in nursery 70.00 Nos. 35.35

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Green Mahindi

134 Bowling and developing flowering plants grown in nursery 15.00 Nos. 85.85

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Varigated Ficus

135 Bowling and developing flowering plants grown in nursery 10.00 Nos. 70.70

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted New Black Ficus

136 Bowling and developing flowering plants grown in nursery 5.00 Nos. 45.45

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted White Ribbon Plants

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

137 Bowling and developing flowering plants grown in nursery 50.00 Nos. 60.60

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Green Mahendi border

138 Bowling and developing flowering plants grown in nursery 10.00 Nos. 95.95

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Pendulla Asopalav

139 Bowling and developing flowering plants grown in nursery 25.00 Nos. 121.20

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Potted Plants

140 Labour charges for planting various plantsafler proper anti- 258.00 Nos. 70.70

termite treatment in pits including placing properly and

filling the pits with required prepared mix soil and watering

and dispporting etc. complete

141 Maintance of the garden for 60 days after Complition of 3 1.00 Job 25250.00

month stipulated period is completed for plantation of lawn

and plants including applying second round of proper anti-

termite treatment

142 Providing laying and jointing in true line and level 40mm 100.00 Rmt 148.12

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two metre

C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all

materials. and fixing brass screw down stop cock (A) 15 mm

143 Providing 5.00 Nos. 205.83

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

144 Rubber Hose Pipe 15 mm dia of approved brand and make 30.00 Rmt 90.90

145 Providing and fixing G.I. Nipple as directed 20.00 Nos. 50.50

146 Providing & Laying Rain Water Junction Chamber of Clear 2.00 Nos. 6241.80

Internal Size 0.60 x 0.60 x 0.75m with excavation of size

1.36 x 1.36m & 0.15m thick M200 Bed Concrete Including

brick masonary 0.23 thick wall in C.M. 1:6 of 0.75m height

with 15mm thick Cement Plaster inside & outside (1:4),

1.06 x 1.06 RCC M200 top slab of thickness 0.15m with

TMT steel and 455mm x 610mm cast iron manhole cover

with frame weight not less than 35 kg as per directed by

Engineer-in-charge.

147 Providing & Laying Filter chamber of brickwork 0.23 thick 2.00 Nos. 22067.49

in C.M. 1:6 of clear internal size 2.04m x 1.20m x 1.20m

and excavation dimension of 2.80m x 1.96m x 1.35m

including C.C. M200 Bed Concrete 0.15m thick and RCC

M200 Top slab of thickness 0.15m with TMT steel,

Including 15mm (1:4) thick cement plaster inside & outside

with Cement slurry & top cover with frame of minimum

weight of 35kg, including filling filter material of 200mm

thick each layer of 25-40mm, 10-20mm of BT metal and

sand as per directed by engineer-in-charge

148 Providing & Laying Water Harvesting Pit of clear size 2.00 1.00 Nos. 32558.36

mt x 2.00 mt x 4.00 mt. For water logging with excavation

in any strata upto four meter depth, Brick work 0.23 thick in

C.M. 1:6 of clear internal size 2.00m x 2.00m x 1.20m with

15mm thick C.M. 1:4 plaster, filling the pit with B.T. metal

40mm in 0.60 mt. depth with 25-40mm kaptchi, 0.30 mt.

depth and 2mt. depth with coarse sand in layers including

makng P.V.C. line for water inlet etc. as directed with

250mm dia bore 15mt. depth amd 150mm dia PVC pipe of

10 Kg.f/cm2 casing wih gravel packing or as directed.

149 II) Fire Extinguisher and Exit Signages Supply, installlation, 10.00 Nos. 6447.84

testing and commissioning of Carbon Dioxide (CO2) type

Fire Extinguisher of 4.5 kg confirm to IS:15683, with ISI

marked / TAC approved fitted with required accessories

including wall suspension brakets.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

150 Supply, Installation, Testing & Commisioning of ABC type 10.00 Nos. 2222.00

6kg confirm IS:15683, with ISI marked / TAC approved

fitted with required accessories including wall suspension

151 Excavation for foundation upto 1.5 m depth including 27.00 Cum 272.57

sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter lead.(B)

Dense or Hard soil

152 Excavation for foundation for depth from 1.5 m to 3.0 m 9.00 Cum 498.93

including sorting out and stacking of useful materials

and disposing of the excavated stuff upto 50 Meter

lead.(C) Hard Murrum

153 Providing and laying cement concrete 1:5:10 (1- Cement : 5- 2.00 Cum 2566.77

fine sand : 10- graded brick bat aggregates 40mm nominal

size) and curing complete excluding cost of formwork in (A)

Foundation and Plinth

154 Half brick masonry in common brunt clay building bricks 19.00 Sqmt. 618.79

having crushing strength not less than 35 Kg/Sq.Cm. in

Cement mortar 1:5 (1- Cement : 5 -coarse sand ) in

foundation and plinth (B) Conventional

155 Providing and laying cement concrete flooring 1:2:4 (1- 13.00 Sqmt. 352.01

cement : 2-coarse sand : 4-graded stone aggregate 20mm

nominal size) laid in one layer and finished with a floating

coat of neat cement. (B) 50mm thick.

156 Providing 15mm thick cement plaster in single coat on 82.00 Sqmt. 184.78

Rough (Similar)side of single or half brick walls for interior

plastering upto floor two level and finished even and smooth

in (i) Cement mortar 1:3 (1-cement:3-sand)

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

157 Providing and Laying ordinary cement concrete 1:2:4 (1- 3.00 Cum 6888.15

Cement 2- coarse sand : 4- graded stone aggregates 20 mm

nominal size) and finishing smooth with curing etc.

complete including the cost of formwork but excluding the

cost of reinforsement for R.C.C work in (iii) Slabs having

more than 10 cm and upto 13 cm. thickness

158 Providing and laying (to level or slopes) and jointing with 10.00 Rmt 317.48

stiff mixture of Cement Mortar in proportion 1:1 Salt glazed

stoneware pipes including testing of pipes and joints

complete.(B) 150mm dia.

159 Providing and Constructing sock pit of 2.46 mt. dia outside 2.00 Nos 35192.44

and 4 mt depth with honey combed masonary 6.50 mt. from

bottom and 0.60 mt. brick masonary in C.M. 1:6 top with

RCC slab cover of M200 vent pipe 1.8mt. Long 75mm dia

& C.I. cover and cowel vent etc. comp

160 Providing corrugated G.I. sheet of class-3 roofing fixed with 371.00 Sqmt. 734.19

glavanished iron J or L Hooks, Bolts and nuts 8mm diameter

with bitumen and G.I. limpet washer or G.I. limpet washer.

filled with white lead complete excluding the cost of purlins,

Rafters and Trusses.(1) 0.80 mm thick sheet.

161 Point wiring for Light / Bell with 2-1.5 sq.mm & earth 140.00 Pt 485.81

wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV

grade FRLS PVC insulated multi strand copper wires up to

10 mtr length , in below type of pipe erected with 6A

Modular type switch / bell push & accessories and earth

continuity of following type, erected on PVC /

Metallic/Wooden box, single mounting base frame covered

with textured/metallic/white front plate modules erected on /

in wall / ceiling as per pipe erected, with necessary Lamp

holder/ceiling rose / H.D.Connector as directed.(f) with

medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete Cat. III

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

162 Point wiring for Light / Bell with 2-1.5 sq.mm & earth 12.00 Pt. 242.91

wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV

grade FRLS PVC insulated multi strand copper wires up to

10 mtr length , in below type of pipe erected with 6A

Modular type switch / bell push & accessories and earth

continuity of following type, erected on PVC /

Metallic/Wooden box, single mounting base frame covered

with textured/metallic/white front plate modules erected on /

in wall / ceiling as per pipe erected, with necessary Lamp

holder/ceiling rose / H.D.Connector as directed.(f) with

medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete Cat. III BATH / W.C.

/TOILET Cat - III

163 Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 45.00 Pt 674.68

sq.mm (Green) both are of .ISI marked 1.1 KV Grade FRLS

PVC insulated multi strand copper wires up to 10 mtr

length, in below type of pipe erected with 6A Modular type

switch and hum free EME step type electronic fan regulator

mounted and accessories with earth continuity of following

type erected on PVC / Metallic/Wooden box, single

mounting base frame covered with textured/metallic/white

front plate modules erected on / in wall / ceiling as per pipe

erected. with necessary ceiling rose / H.D.Connector as

directed.(f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling complete Cat.

164 Point wiring for on board Looped Plug with 6A Modular 37.00 Pt. 257.55

type switch & 5 pin socket erected on PVC /

Metallic/Wooden box, single mounting base frame covered

with textured / metallic/white front plate modules erected

on / in wall / ceiling with following type accessories Cat. III

165 Providing following type of Modular Type Accessories 13.00 Ea. 160.59

mounted with PVC / metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front plate

, modules erected with necessary connections as per site

situation directed by Engineer In charge.(3) Two Pin/RJ-11

Telephone Socket [A] For One Gang Cat.III

166 Providing following type of Modular Type Accessories 2.00 Ea. 160.59

mounted with PVC / metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front plate

, modules erected with necessary connections as per site

situation directed by Engineer In charge. (4) TV Co-axial

Socket outlet CAT-III

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

167 Providing following type of Modular Type Accessories 45.00 Ea. 180.79

mounted with PVC / metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front plate

, modules erected with necessary connections as per site

situation directed by Engineer In charge. (9) 16 Amp. SP one

way switch cat-III

168 Providing following type of Modular Type Accessories 45.00 Ea. 199.98

mounted with PVC / metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front plate

, modules erected with necessary connections as per site

situation directed by Engineer In charge. (10) 6/16Amp.

Universal socket cat-III

169 Providing following type of Modular Type Accessories 18.00 Ea. 494.90

mounted with PVC / metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front plate

, modules erected with necessary connections as per site

situation directed by Engineer In charge. (21) Foot Light as

per colour requirement with concealed box, modular

accessories, acrylic glass cover with suitable LED watt with

all accessories as per following module (b) Four modules

170 Providing and erecting ISI mark Medium class RIGID PVC 500.00 Mtr. 24.24

PIPES of following size complete to be erected on/in wall or

ceiling erected with necessary PVC fittings & Junction

boxes fixed with adhesive solution & Clamps with following

dia of pipes, in approved manner as directed (a)20 mm

171 Providing and erecting ISI mark Medium class RIGID PVC 200.00 Mtr. 33.33

PIPES of following size complete to be erected on/in wall or

ceiling erected with necessary PVC fittings & Junction

boxes fixed with adhesive solution & Clamps with following

dia of pipes, in approved manner as directed (b) 25 mm

172 Providing and erecting Mains with 1.1 KV grade FRLS PVC 3993.00 Mtr. 82.82

insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected concealed in /flushed

on wall/ceiling, with 1.5 sq. mm copper conductor FRLS

PVC insulated stranded wire of green colour for earth

continuity of following size (A) With medium class Rigid

PVC pipe and accessories (b) 2 wire 2.5 sq. mm

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

173 providing and erecting Mains with 1.1 KV grade FRLS PVC 900.00 Mtr. 112.11

insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected in / on wall / ceiling

with 2.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of

following size (A) with medium class Rigid PVC pipe and

accessories (a) 2 wire 4 sq. mm

(use earth wire of 2.5 sq.mm )

174 providing and erecting Mains with 1.1 KV grade FRLS PVC 90.00 Mtr. 425.21

insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected in / on wall / ceiling

with 2.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of

following size (A) with medium class Rigid PVC pipe and

accessories (i) 4 wire 10 sq. mm

(use earth wire of 4 sq.mm )

175 providing and erecting Mains with ISI marked, 1.5KV grade 32.00 Mtr. 91.91

electrolyte multi stranded, annealed copper conductor with

heat resistant PVC insulated conforms to IS 694, IEC -

erected in existing pipe of following size (Specifically for

control panel, relays, power switchgears, motor starters &

control wiring) with required size of copper lugs, nuts and

bolts if required.(f) One wire 10.00 sq. mm

176 Supplying and erecting Flexible PVC insulated multi strand 100.00 Mtr. 46.46

multi core 1.1 kv grade ISI marked copper wires of

following size to be erected as directed.(e) 1.50 Sq.mm

core round PVC sheathed

177 Providing & Erecting approved make following size of TV 60.00 Mtr. 62.62

Co-axial flexible cable comprising inner conductor of solid

bare copper insulated with Foam PE & Secondary conductor

made of poly - Aluminium film bonded Al. Braids @

suitable coverage overall sheathed with black PVC

insulation. (e) RG-11

178 Supplying & erecting approved make Telephone Cable 260.00 Mtr. 20.20

electrolytic copper conductor PE insulation twisted in two

pairs, & wrapped with FRLS PVC tape & sheathed with

FRLS PVC or HFFR outer Jacket suitable for telephone

wiring & confirming to C-DOT erected in existing pipe. of

following size of conductors & nos.of pairs. With necessary

connections.[A] Conductor Size 0.5 mm (a) Unarmoured

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

179 Providing & erecting Switch board for Computer or electric 42.00 Ea. 1133.22

apparatus consisting of following modular type accessories

mounted with PVC / Metallic concealed/open box with

single mounting base frame covered with textured/metallic

/white front plate,modules erected with necessary

connections as directed

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug For Modular Type Accessories cat-

180 Decorative call bell Ting-tong box type 250 volts complete 13.00 Ea. 71.71

181 Supplying and erecting LED indoor fittings with LEDs of 91.00 Ea. 373.70

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA/ aluminium die cast

powder coated and high U.V. & corrosion resistance with

diffuser with company mark/name 160V to 270V, Power

Factor more than 0.95, THD < 15%,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE:

Below description have shown ranges of Wattage capacity of

LED fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.)(A) Tube Light with

integral driver (iv) 22-24 Watts, Surge - 2KV,IP-20,

conventional 4 feet cat III

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

182 Supplying and erecting LED indoor fittings with LEDs of 5.00 Ea. 165.64

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA/ aluminium die cast

powder coated and high U.V. & corrosion resistance with

diffuser with company mark/name 160V to 270V, Power

Factor more than 0.95, THD < 15%,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE:

Below description have shown ranges of Wattage capacity of

LED fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.)(A) Tube Light with

integral driver (i) 5-10 Watts, Surge-2 KV, IP-20,

conventional 1 to 2 feet Cat-lll

183 Supplying and erecting LED indoor fittings with LEDs of 12.00 Ea. 535.30

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA/ aluminium die cast

powder coated and high U.V. & corrosion resistance with

diffuser with company mark/name 160V to 270V, Power

Factor more than 0.95, THD < 15%,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE:

Below description have shown ranges of Wattage capacity of

LED fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.)(A) Tube Light with

integral driver (v) 36-40 Watts, Surge-2 KV, IP-20,

conventional 4 feet Cat-lll

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

184 Supplying and erecting LED street light / Flood light fittings 15.00 Ea. 4997.48

with High power White LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency more than

lm/w and corrosion free High pressure die cast aluminum

housing with smooth finish powder coated and heat sink

extruded aluminium with diffuser and Polycarbonate optics/

lenses, with toughened glass with company mark/name

engraved or embossed 160 to 270 V,Power Factor more than

0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio

>0.45, Luminaire efficacy> 100 lumens/watt . LED driver

efficiency > 85 %.( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown ranges

of Wattage capacity of LED fittings.The Engineer incharge

may select any wattage capacity between the ranges

shown.)(A) Street Light (IP-65), Surge protection -4KV

integral and ,Light must have 440VAC line supply with over-

voltage protection. (ii) above 48 to 60 WattsCat-lll

185 Supplying and erecting LED street light / Flood light fittings 9.00 Ea. 6088.28

with High power White LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency more than

lm/w and corrosion free High pressure die cast aluminum

housing with smooth finish powder coated and heat sink

extruded aluminium with diffuser and Polycarbonate optics/

lenses, with toughened glass with company mark/name

engraved or embossed 160 to 270 V,Power Factor more than

0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio

>0.45, Luminaire efficacy> 100 lumens/watt . LED driver

efficiency > 85 %.( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown ranges

of Wattage capacity of LED fittings.The Engineer incharge

may select any wattage capacity between the ranges shown.)

(B) Flood Light (IP-65), Surge protection -4KV integral and

,Light must have 440VAC line supply with over-voltage

protection. (iii) Above 60 to 90 watts cat-III

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

186 Supplying and erecting LED street light / Flood light fittings 2.00 Ea. 4092.52

with High power White LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency more than

lm/w and corrosion free High pressure die cast aluminum

housing with smooth finish powder coated and heat sink

extruded aluminium with diffuser and Polycarbonate optics/

lenses, with toughened glass with company mark/name

engraved or embossed 160 to 270 V,Power Factor more than

0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio

>0.45, Luminaire efficacy> 100 lumens/watt . LED driver

efficiency > 85 %.( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown ranges

of Wattage capacity of LED fittings.The Engineer incharge

may select any wattage capacity between the ranges shown.)

(C) Post Top Lantern LED fitting comprises of finish cast

aluminum spigot and spun aluminum canopy fixed with opal

polycarbonate, pipe arrangement for vertical mounting

driver and accessories wired upto terminal block.IP 65 (i)20-

187 Pproviding and erecting Approved make Four pole moulded 6.00 Ea. 6173.12

case circuit breaker having breaking capacity ICU of 25 KA.

at 415 V,having normal current rating up to 25 A to 100A.

with Fixed thermal & magnetic release suitable to work on

A.C. supply 50 c/s. with all internal connections, spreader

tinned copper & complete erected in existing 16 G.M.S.

housing. ICS=100% of ICU only Cat III

188 Providing and erecting Approved make Four pole moulded 1.00 Ea. 16221.61

case circuit breaker having breaking capacity ICU of 35 KA.

at 415 V. having Normal current rating 200A.with variable

Thermal & magnetic release suitable to work on A.C.supply

50 c/s. with all internal connections, spreader tinned copper

& complete erected in existing 16 G.M.S.housing

ICS=100% of ICU only Cat III

189 Providing and erecting Approved make Four pole moulded 1.00 Ea. 17843.77

case circuit breaker having breaking capacity ICU of 35 KA.

at 415 V. having normal current rating 125A. with Fixed

thermal & magnetic release suitable to work on A.C.supply

50 c/s. with all internal connections, spreader tinned copper

& complete erected in existing 16 G.M.S. housing.

ICS=100% of ICU only Cat III Note:-1 Add

Rs. 10% extra for housing/Encloser of MCCB for Item No 3-

4-1 to 3-4-12 (The Enclosures should be used of same

company of MCCBs to be used)

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

190 Providing and erecting Approved make Earth fault Relay 1.00 Ea. 4983.34

suitable to mount with inter connection suitable to

following size of moulded case circuit breaker having CT

ratio & MCCB rating as following along with shunt trip

220V AC. with all internal connections & complete erected

in existing M.S.housing.. (2) 125 A -200 A , CT Ratio

191 Supplying & erecting approved make Four Pole 415V 1.00 Ea. 12241.20

change over switch interior for panel mounting with

operating mechanism A.C.23 duty confirming to IS for

(D)200A Cat.III

192 Supplying and erecting triple pole & neutral 440V / 500V 1.00 Rn.Mtr. 3202.71

panel mounting Copper Busbars with four equal Nos. of

electrolyte bus having current density not more than

Amp. / sq.mm (Rated current / cross section area) duly

wrapped with colour insulating tape for phase sequence of

following current carrying capacity, erected with necessary

bus bar supports /insulators, main cable socket to each bar,

erected in existing cubical panel with necessary

connections.(B) Suitable for 200 Amp. capacity

193 Supplying and erecting triple pole & neutral 440V / 500V 0.50 Rn.Mtr. 1961.42

panel mounting Copper Busbars with four equal Nos. of

electrolyte bus having current density not more than

Amp. / sq.mm (Rated current / cross section area) duly

wrapped with colour insulating tape for phase sequence of

following current carrying capacity, erected with necessary

bus bar supports /insulators, main cable socket to each bar,

erected in existing cubical panel with necessary

connections. (A) Suitable for 100 Amp. Capacity

194 Supplying KITKAT pattern porcelain cut-out fuse with base 3.00 Ea. 278.76

of following current capacity erected on existing block

board.(v) 100 A. 500 V.

195 providing and erecting Miniature circuit breaker single pole 24.00 Ea. 270.68

0.5A to 2A system and having breaking capacity 10 KA to

be erected in existing box. confirming to IS 8828/1996 with

ISI Mark Cat.III

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

196 providing and erecting Miniature circuit breaker single pole 108.00 Ea. 112.11

6A to 25A suitable to operate on 240 V A.C. system and

having breaking capacity 10 KA to be erected in existing

box. confirming to IS 8828/1996 with ISI Mark Cat.III

197 Providing & erecting 415 V MCB Four Pole for Motor & 5.00 Ea. 737.30

Inductive Load (C Curve) having 10KA breaking capacity

& confirms to IS :8828 in existing box having following

capacity (c)63 Amp. Cat.III

198 Providing and erecting Sheet Steel powder coated MCB 3.00 Ea. 3874.36

distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to IS

8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of same

company of MCB to be used) suitable for (B) three phase

incoming and single phase horizontal type outgoing Per

phase isolation type (PPI) (b) sheet steel double door (iv)12

199 providing and erecting Approved make RCCBs conforming 9.00 Ea. 2235.13

to IS: 12640 and having sensitivity of 30 mA and Short

Circuit withstand capacity of 10 KA and suitable for

operation on single phase 240 V,50Hz. having characteristic

of quick action & tripping with all advance feature & do not

incorporate any electronic component. for following Max.

rating erected as directed (ii) 40Amps. DP Cat.III

200 Providing and erecting metallic vitrified danger notice board 2.00 Ea. 69.69

as per language suggested by engineer incharge for

MEDIUM VOLTAGE installation to be erected as per IS-

201 Providing and erecting Pipe type earthing having 150 15.00 Ea. 368.65

cms.long and 2.5 cms. dia. galvanised iron pipe with

coupling and buch buried in specially prepared earth pit

complete with necessary 8 SWG earth wire.

202 For using salt and charcoal / coke as required for pipe type 15.00 Ea. 171.70

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

203 Providing and erecting Annealed bare Copper wire 8 to 16 15.00 Kg. 794.87

204 Supplying & erecting earth pit of minimum bore dia.150mm 3.00 Ea. 4591.46

size approved make Earthing Electrode consisting Pipe-in-

Pipe Technology as per IS 3043-1987 made of corrosion free

hot dipped G.I.Pipes having Outer pipe dia of 50mm

having 80-200 Micron galvanising, Inner pipe dia of 25 mm

having 200-250 Micron galvanising, connection terminal dia

of 12mm with constant ohmic value surrounded by highly

conductive compound with high charge dissipation suitable

for following type of applications with chamber and heavy

duty cover. (A)(approved make OEM has to submit test

certificate including value of earth resistance of installation

duly stamped and signed by agency and officer Incharge has

to ensure the value of earthing resistane mentioned in test

Certificate) & having back filling compound of (B) Inner

chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter

testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no

load & dry form, Sulphar content:- <2%(C) Back fill

Compound :- Earthing compound should be capable to

retain moisture for long time Necessary test report must be

submitted by Agency. (a) For Electrical Installation up to

440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

205 Providing & erecting weather proof, dust & vermin proof, 2.30 Sq.Mtr. 10468.65

floor mounted front operated indoor type cubical panel

board necessary IP-42 and above protection as per approval

from engineer incharge made from 14 SWG thick CRC M.S.

sheet for outer body & doors, 16 SWG thick CRC M.S.sheet

for internal partitions with necessary accesories , supporting

angles/ flats channel including cutting, bending, drilling,

welding, riveting with internal partitions & cable alley as per

requirements & instruction of engineer-in-charge with

erection of supplied switch gears, BUSBARS, suitable size

of inter connecting PVC copper wire / copper-aluminium

strips, rubber grommets, rib, bakelite control fuses/MCB for

measuring instruments, earth bus & earth bolts, foundation

flange - bolts-base Plates, sufficient nos. of hinged doors,

handles with locking arrangement and rubber gasket,heavy

duty end terminal connection,danger notice board,necessary

ventilation,earthing strip complete. The Panel shall be

painted with epoxy powder coating. (The rates excludes the

cost of switchgears, bus bars, inter connecting mains &

Copper Aluminium strips, meters, Fuses etc. The dimension

shall be measured excluding base beams) The panel shall be

supplied with following approved manufacturers with

following size.(A) locally fabricated panel board (i) with

206 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured 360.00 Mtr. 153.52

cable multistrand Aluminium conductor for 1.1 KV. to be

laid on wall with necessary clamps or in existing trench /

pipe of following size of cables(A) 4 core 16 Sq. mm

207 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured 100.00 Mtr. 378.75

cable multistrand Aluminium conductor for 1.1 KV. to be

laid on wall with necessary clamps or in existing trench /

pipe of following size of cables (D) 3 1/2 core 70 Sq. mm (

35 Sq. mm 1/2 core)

208 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured 200.00 Mtr. 126.25

cable multistrand / Solid Aluminium conductor for 1.1 KV.

to be laid on wall with necessary clamps or in existing

trench / pipe of following size of cables (B) 4 core 6 Sq.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

209 Making trench in soft soil of suitable width of 90 cm deep 460.00 Mtr. 55.55

for laying cable or locating the fault all over the run and

back filling the same and making the surface as normal

210 Making trench in Hard Murrum / Tar Road of suitable width 20.00 Mtr. 74.74

of 90 cm or required depth for laying any size of cable or

locating the fault all over the run and back filling the same

and making the surface as normal ground.

211 Making trench in Hard Murrum / Tar Road of suitable width 10.00 Mtr. 357.54

of 90 cm or required depth for laying any size of cable or

locating the fault all over the run and back filling the same

and making the surface as normal ground. (B) If additional

machinery like hammer driller or JCB use [Add]

212 Drilling the road without breaking the road surface (Asphalt) 10.00 Mtr. 492.88

for laying of cable for feeding power supply by making up to

following size of holes at both ends complete. (A) Up to

213 Providing & laying approved make Double walled 510.00 Mtr. 62.62

corrugated pipes (DWC) of polyethylene(conforming to IS

14930 II )with necessary connecting accessories of same

material at required depth in existing trench for laying of

cable. below ground / road surface for enclosing cable

(A)50 mm outer dia

214 Providing & laying approved make ISI marked Rigid PVC 20.00 Mtr. 171.70

pipe having 6Kg / cm2 (Class-3) to be erected at road

crossing on or floor as directed for laying of cable. The pipes

as following size of dia & weight per 6 mtr.(E) 90 mm inner

Dia (8.0 Kg / 6RMT)

215 Providing and, fixing heavy duty flange type brass cable 18.00 Ea. 38.38

gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for

following size of cables.(B) 2 to 4 core 6 Sq. mm

216 Providing and, fixing heavy duty flange type brass cable 32.00 Ea. 47.47

gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for

following size of cables. (D) 2 to 4 core 16 Sq. mm

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

217 Providing and, fixing heavy duty flange type brass double 2.00 Ea. 103.02

compression type cable gland with rubber ring for PVC

insulated armoured cable complete with out going tails,

insulating tape etc for following size of cables. (C) 3 & 1/2

218 Solder less crimping type Aluminium lugs conforming to IS 72.00 Ea. 6.06

suitable for cable of following size evenly crimped with high

pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner.(A)

219 Solder less crimping type Aluminium lugs conforming to IS 128.00 Ea. 15.15

suitable for cable of following size evenly crimped with high

pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner. (C)

220 Solder less crimping type Aluminium lugs conforming to IS 2.00 Ea. 20.20

suitable for cable of following size evenly crimped with high

pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner. (D)

221 Solder less crimping type Aluminium lugs conforming to IS 6.00 Ea. 25.25

suitable for cable of following size evenly crimped with high

pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner. (E)

222 Providing & erecting Approved make Power Saving 50 Watt 45.00 Ea. 1948.29

Ceiling Fan with double ball bearing ISI mark with

Condenser 230 volt A.C. 50 Hz 1200 mm sweep complete

having 3blades with aluminium blades with , canopy &

cm. down rod erected with earthing.(Make shall be approved

by Engineer in charge))

223 Supplying and erecting 19 / 20 mm. nominal bore Medium 45.00 Mtr. 108.07

Class M.S. Pipe down rod erected duly painted for fan

complete with proper insulation without leakage and

224 Supplying & erecting fan hook box of 10 mm M.S. round 45.00 Ea. 108.07

bar bounded to the RCC bars up to 50mm length each side

and pierced through a 16 Gauge M.S. box / Heavy Duty

PVC box complete erected concealed in Ceiling with

necessary finishing.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

225 Providing 2.5mm.thick laminated acrylic sheet to cover the 45.00 Ea. 18.18

fan hook or Fan box.

226 Supplying & erecting approved make low noise decorative 6.00 Ea. 1366.53

exhaust fan having square frame ABS body with inbuilt

lowers & square frame.250mm with 1350 RPM Cat.II

227 Supplying and erecting approved make oscillating type 7.00 Ea. 2352.29

medium duty bracket fan with Aluminium Blades A.C.

23OV. 50cy/s wall mounted with height adjustment and

rotary tilting device complete with guard, mounting

accessories kit, pull cord for speed and oscillation flexible

Core plug top complete erected with lead wires as

directed.(a) 400mm

228 Supplying & erecting Galvanized M.S pipe post “B” class 15.00 Ea. 4440.97

88.9 mm O.D 6 mtr. Long duly painted with two coats of

aluminium paint complete with metallic base- plate of

mm x 300 mm x 4mm thick for using as a compound light

pole with approx. weight 47 Kg.

229 Supplying & erecting approved make SMC press moulded 15.00 Ea. 1122.11

composite FRP. loop-in, loop-out approx. 2mm thick box

complete with Bakelite connector strip 5way(3P+N+E),DIN

rail for mounting mob & hinged doors as per requirement

having locking arrangements with mounting clamp with

nuts, bolts & washers suitable for erection on pole with

cable clamps& earth bolt of following size of box.(G)

250mm x 220mm x 135mm [deep]

230 Supplying & erecting approved make SMC press moulded 9.00 Ea. 476.72

composite FRP. loop-in, loop-out approx. 2mm thick box

complete with Bakelite connector strip 5way(3P+N+E),DIN

rail for mounting mob & hinged doors as per requirement

having locking arrangements with mounting clamp with

nuts, bolts & washers suitable for erection on pole with

cable clamps& earth bolt of following size of box.

(C)150mm x 125mm x 100mm [deep]

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

231 Providing and erecting street light pole bracket comprising 15.00 Ea. 561.56

main B Class MS pipe of 4.2 cm/require outside dia.

complete with suitable B Class M.S. sleeve tubing of

approx. 45cms.length and suitable for 76.5 mm / 80mm. /

require size pole top having sufficient fasteners for fixing

the brackets and having spread of 1 mtr. length with suitable

rise as per site condition & suitable welded stiffener reducer

and nipple with check nut complete painted with one coat of

Red oxide / PU base primer and two coats of Aluminium /

PU paint. paint with following nos of arms.[A] Single Arm

232 Providing 1:2:4 cement concrete foundation & 70 % PCC 15.00 Ea. 809.01

from bottom including excavation for the pole of size 45 x

45 x 100 cm. Deep in below ground level with plinth of

cm x 45 cm (or 45 cm dia x 45 cm) high upper ground level

with necessary curing and finishing in approved manner.

( for 4 & 6 mtr pole)

233 Supplying and erecting B class Galvanized iron pipe having 30.00 Mtr. 180.79

smooth finished bore of the pipe on both ends erected nuts

and bolts along the pole / wall shaping the pipe as per site

requirement. Pipe dia as following. (A) 25 mm dia

234 Supplying and erecting B class galvanised iron pipe 32 mm 9.00 Ea. 343.40

outside dia 45 cm long duly welded on 20 cm x 20 cm x

mm thick M.S. base plate, erected on wall or corner for

mounting street light luminaire with necessary hardware

materials duly painted.

235 Supplying & erecting IP 55 grade following size section 1.00 Ea. 16691.26

pillar fabricated from joint less M.S. Sheet with angle iron

legs made from jointless M.S. Angle with cable clamps to be

buried in ground to have appropriate erection to work

uniform until erected with cement concrete foundation and

45 cm high bricks work finishing with plaster etc. hinged

double door internally supported on both side, with internal

and outside looking arrangement with look and keys in

duplicate 35 x 35 x 5 mm M.S. Angle of Two Nos. one is

welded and other with nut and bolt for erecting Bakelite

sheet. Painting the Section Pillar inside and out side with

three tank powder coated paint. section pillar roof should be

without joint with water leakage proof & tested as per IP

test & followed by IS 2147 of 1962 (A) 150 X 90 X 75 cm

section pillar fabricated from 14 Gauge MS Sheet with angle

iron legs 95 cm long made from 40 X 40 X 6 mm thick MS

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

236 Supplying and erecting HYLAM sheet on existing angle iron 0.68 Sq.Mtr. 771.65

frame.for following thickness (B) 4mm

237 Supplying & erecting approved make Digital time switch 1.00 Ea. 3168.37

having lithium cell 6 years operative and operate battery

backup 1 channel day clock with 14 memory programme,

suitable to operate on 240V + 5%, 16A with, floating

contacts Minimum switching setup time 1 minimum & LCD

display. Also comprised permanent ON/OFF switching.

Programming switches & housed in fire proof thermoplastic

enclosure & transparent cover erected as required with

necessary connection erected as directed.

238 Supplying & erecting power contactor ,AC3 duty for time 1.00 Ea. 2782.55

switch complete erected as per direction Cat III (D) 4 pole

239 Providing and erecting Inverter based approved make split 1.00 Ea. 41725.12

air-conditioning unit consisting of condensing unit with

variable speed fan motor, inverter type hermetically sealed

rotary compressor with accessories etc. duly connected

separately erected evaporating unit and blower motor with

its accessories by means of extra supplied proper insulated

copper tubing,drain PVC pipes suitable for ( cost includes

Eco Friendly green gas charging and 15A plug top &

Remote Control & MS Stand) with necessary core

cutting.(1)For ISEER Range (KWH/KWH)(3.1 to 3.99) (B)

for 1.5 ton capacity

240 Providing and erecting Inverter based approved make split 2.00 Ea. 51666.55

air-conditioning unit consisting of condensing unit with

variable speed fan motor, inverter type hermetically sealed

rotary compressor with accessories etc. duly connected

separately erected evaporating unit and blower motor with

its accessories by means of extra supplied proper insulated

copper tubing,drain PVC pipes suitable for ( cost includes

Eco Friendly green gas charging and 15A plug top &

Remote Control & MS Stand) with necessary core

cutting.(1)For ISEER Range (KWH/KWH)(3.1 to 3.99) (C)

for 1.7 to 2 ton capacity

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

241 Supplying and erecting insulated pair of soft copper tubing 15.00 Rn.Mtr. 965.56

open or concealed including power and control

cable,necessary PVC drain pipes for Split AC machine up

to 4 TR capacity

242 Providing & erecting water cooler having storage capacity 1.00 Ea. 55893.40

150 Ltr. & cooling capacity 150 Ltr.per hour @ an ambient

temp of 45˚ C. The outlet temp. of the water should drop by

15˚C within a hour, The water cooler should be comprising

of hermetically sealed compressor, fan motor, condensing

unit, water tank surrounded by evaporating, coil,

thermostats, relay etc.complete with necessary inlet & outlet

connection. The body of water cooler will be made from

Stainless Steel.

243 Supplying & erecting 5 stage single reverse osmosis water 1.00 Ea. 29187.99

purification system with M.S. powder coated frame, prefilter

housing with 'O' ring presediment filter GAC filter, carbon

filter suitable buster DC pump capacity 80 psi, mention with

40 psi inline type post carbon filter auto low & high pressure

switches with following size of storage tank & LPH capacity

& erected as directed [C] 50 Ltr / Hr with 150 psi 2 nos

244 Supplying approved make domestic refrigerator of 165 Ltr to 2.00 Ea. 15116.67

185 Ltr storage capacity, single phase minimum 3 star

245 Supplying and erecting approved make panel mounting type 2.00 Ea. 1275.63

Digital Voltmeter having 3 digits LED display, 0 to 750 AC

Volts range erected on existing panel board with all

connection, wiring etc .with manufacturers calibration

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

246 Supplying and erecting approved make panel mounting type 2.00 Ea. 1558.43

Digital Ammeter having 3 digits LED display, external CT

operated, calibrated for 0 to 1000 Amps suitable to operate

on 500 Volt AC , erected on existing panel board with all

connection, wiring etc .with manufacturers calibration

247 Supplying and erecting Ammeter / Voltmeter selector 4.00 Ea. 317.14

switch for 3 phase AC Supply 500 V on existing panel board

with necessary connections.

248 Providing & erecting L.T. Current Transformer with bar 6.00 Ea. 274.72

primary 50/5 to 1000/5 ratio 15 VA burden erected in

existing CRCA box duly secured with insulating materials

connected to the meter

249 Supplying and erecting approved make suitable panel 6.00 Ea. 43.43

indicator LED type lamp, lens cover, complete erected with

necessary connections.

250 Providing & erecting open well horizontal mono block 2.00 Ea. 18746.61

pump set with cast iron body, complete for three phase

submersible motor having [D] For 5 HP 3 phase open well

horizontal mono block pump set suitable for 1350 LPM to

310 LPM @ 10 to 42 Mtr head suitable for 50/65 mm dia

delivery pipeCat.II

251 Supplying & erecting approved make motor control 2.00 Ea. 7722.46

cubical panel (Direct - on - line) made from 16 G. CRCA

sheet duly epoxy powder painted inside and outside with

hinged doors and locking, arrangement consisting of suitable

size of ON- OFF isolator (AC - 3/23duty) main fuses, single

phasing preventer, indicating lamps for R- Y - B phases,

overload relay, Automatic water level controller, Ammeter,

Voltmeter each with two way selector switch incoming,

wires duly socket crimped, main contactor & overload relay,

start - stop push buttons, to be erected on angle iron frame

grouted on wall as directed. The isolator, overload relay &

contactors will be of L & T, Siemens or BCH make only.

(A) DOL up to 5.0 H.P.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

252 Lowering of submersible motor pump set at the depth of 2.00 Per Job 856.48

following ,complete with required. Nos. and size of casing

pipes erected by means of proper chain pulley block & pipe

wrenches after checking of threads of each pipe with

coupling to take the load of the pump set and pipe assembly

filled up with water (D)For Open well Horizontal

submersible pump set for sump well (i) 1 HP to 5 HP

253 Providing and erecting ISI marked PVC insulated PVC 50.00 Mtr. 172.71

Sheathed Flat flexible Submersible copper cable approved

make of following Size. (D) 3 Core x 6 Sq. mm.

254 Supply of following size of TOP & BOTTOM accessories 2.00 Per Set 1900.82

i.e. Adaptor set (CI) long, pump guard set, starter pipe

Rubber ring for submersible pump & UPVC column pipe as

directed by Engineer - in - charge with necessary plumbing

as desired. [E] 65 mm dia

255 Supplying of following size of HEAVY UPVC column pipe 50.00 RMT. 493.89

with coupler and wire lock [C] 65 mm dia

256 Supplying and erecting ISI marked sluice valve at position 2.00 Ea. 1558.43

with necessary material for following size of pipe

diameter.(E) 65 mm(2.5")

257 Supplying, & erecting C.I. swing, check type non-return 2.00 Ea. 1489.75

(Reflux) Valve -ISI marked suitable for following size (B)

Total Cost of Construction Cost

(Rupees Two Crore Seventy Five lakh Thirty Nine Thousand Six Hundred Forty Only)

I/We am/are willing to carry out the work at ………………………………………………..% above/below

(percent should be written in figures and words) of the estimated rates mentioned above. Amount of my/our tender

works out as under.

*Estimated amount *Estimated amount

Put to tender Rs…27539640 Put to tender Rs.27539640

Deduct ……. % below Rs……………………..…. Add ……. % Avove Rs…………..….

Net Rs. …………………….… Total Rs. ………….…

The Contractor shall exhibit a board with detailed specification and details of work as directed by

the Engineer-In-Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done

3 GST and Income tax TDS will be deducted at a source while making payments of bills.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt.G.R.: PRC-

10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where

4 there is a change as per actual mix design the cost of difference of cement consumption have been deducted

from the rate of original item at the rate of input rate mentioned in all the tender.

5 Dismentalling of Credit materials amounting of Rs. -0.00 must be recovered from Contractor's respective

Deputy Executive Engineer Executive Engineer

R&B Sub Division R&B Division