PROVISION OF WELDED MESH ALUMINIUM PARTION CABINETS

Amount

S&F aluminium powder coated three track sliding windows with frame of size 92x31.75x1.3mm and shutters of size 42 x 18x 1.28 mm with rubber gasket, beading and locking arrangement including MAKING arrangement for fixing galss panes or wiremesh etc complete and making good dsturb portion all as specified and as directed by Engr in Charge Note - Glazing/ wire mesh shall be measured and paid seperately under respecive item.

S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed by Engr in Charge

S&F 4.0 mm thick ordinary quality glass and glazing with oil putty/ fixed with aluminium beading/ clips etc in square not exc 0.50 sqm in each pane complete all as specified and as directed by Engr in Charge

S&F Welded steel wire mesh/ fabric (Weight exc 4 Kg/sqm) fixed to steel frame / members complete all as specified and as directed by Engr in Charge

M&L Preparation of new steel surface of any description over 10 cm width and girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and as directed by Engr in Charge

M&L Preparation of old painted steel surfaces of any description over 10 cm width or girth and applying two coat of Synthetic enemal paint complete all as specified and as directed by Engr in Charge

M&L False ceiling work with approved ceiling board of (Armstrong )of size 605 x 605 x 12mm thick prime fine fissured micro look of any bright colour fixed over snap grid frame work of powder coated aluminium sections with wall angles of size 25x25x0.35mm, Main and cross T-section with bottom pre- powder coated of size 24x38x0.70mm, The frame shall be hung with holding clips/ self taping screws/ and GI 6mm dia hangers (upto 1200 length) for grid of size 605x605mm and fixed to roof slabs by means of ceiling cleats/ fasteners complete all as specified and as directed by Engr in Charge .

M&L for cutting grooves in brick wall, 75mm wide and 65 mm deep and making good the horizontal face of grooves with cement mortar 1:3 complete all as specified and as directed by Engr in Charge

M&L for Preparation of new plastered surfaces of walls and applying Two coat of cement base paint complete all as specified and as directed by Engr in Charge

S&F 2 mm thick Fibre glass reinforced transulent corrugated / plain sheeting with or without corrugations with side lap and fixed with coach screw and washer in roof / wall etc complete all as specified and as directed by Engr in Charge

S&F Aluminium powder coated partition walls or section 63.50 X 38.00 X 1.20mm as in framed work fixed to floor or wall including provision for receiving glass panes/particle board fixed with aluminium anodized beading, cleats and rubber gasket and corner supports etc complete all as directed. Note :- Glass/particle board shall be measured and paid separately under Schedule respective item

M&L Pre-laminated particle board, exterior grade 12 mm thick, prelaminated both sides with decorative choice laminations and fixed to aluminium partition / frame work complete all as specified and as directed by Engr in Charge

S&F aluminium powder coated grill fixed to walls with and including 'H' or 'F' aluminium channel of size 38 mm x 12 mm x 1.30 mm complete all as specified and as directed by Engr in Charge

M&L 18/19 mm thick Block board , grade 2 quality , interior grade commercial type , fixed with screws to timber frame work complete all as specified and as directed by Engr in Charge

M&L 1.5 mm thick Decorative laminate type -1, of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and as directed by Engr in Charge

M&L 2nd class hard wood fillets sectional area exc 6 sqcm but n. exc 13 sqcm square , rectangular in section, Wrought and smooth finish complete all as specified and as directed by Engr in Charge

M&L 2nd class hard wood fillets (as in side/edge beadings of work stations) sectional area n. exc 3 sqcm in square , rectangular or triangular in section, Wrought and smooth finish but bullnosed, splayed chamfered or rounded on one edge or face complete all as specified and as directed by Engr in Charge

S&F Parliament Hinges 100 mm , cast brass bright body polished and fixed complete all as specified and as directed by Engr in Charge

S&F Extruded Brass handles 125 mm long , fabricated type polished complete all as specified and as directed by Engr in Charge

S&F Ball catches with 8 mm dia steel ball, and brass body and strike plates including letting in and fixed complete all as specified and as directed by Engr in Charge

S&F Solid PVC wall lining/ panelling consisting of 6 mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification complete all as specified

S&F 5 mm thick PVC sheet fillets of width 35 mm for wall paneling inclusive of fixing on to wall to make PVC frame as per drawings and specification complete all as specified and as directed by Engr in Charge

M & L for preparation of new wooden surfaces of any description n.exc. 10cm width or girth & applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by Engr in Charge

M&L for 2 coats of synthetic enamel paint over a coat of primer including preparation of new wooden surface of any description over 10 cm width and girth complete all as specified and as directed by Engr in Charge

M&L for 1-1.5 mm thick Decorative PVC laminate 18-20 mm wide type -1, on edge / sides of boards surface colour and pattern as approved, fixed with approved adhesive or self adhesive type as per manufacturer's instructions complete all as specified and as directed by Engr in Charge

Agarwal and Company

M/s SK Traders

divyarsh entrprise

Navkar Enterprises

GIRNAR CONSTRUCTION

Ramdev and Sons