CERTAIN REPAIRS AND MAINTENANCE OF MARRIED QUARTERS FURNITURE AT ICGS VISAKHAPATNAM UNDER GE(I)(CG) VIZAG

Amount

Removal of existing broken/unserviceable front leg of Chair dining and replacing the same with new front leg 1st class hard wood (Teak) (size & dimension of the parts shall be of the same pattern/size as shown in drawing as well as specification) and applying two coats of french polich to all the replaced parts to match with existing after proper preparation of surfaces completely all as specified and directed. (FD-279,228 & 203) Note:- All furniture repair works shall be carried out at various units /locations / BSO yard as per the direction of Engr in charge. Quoted rate shall be deemed to be inclusive of all subsequent expenditure occured on carriying out repair at various sites/locations and nothing extra on account of any misunderstanding or otherwise on this account shall be admissible.

All as per Item No. 1 above but replacing the rear leg of Chair Dining.

All as per Item No. 1 above but replacing the back rest/bend stiffner of Chair Dining.

All as per Item No. 1 above but replacing the front/side/back rail of Chair Dining.

All as per Item No. 1 above but replacing the bottom stiffner of Chair Dining.

Removal of existing broken PVC shoe from all legs and replacing with new PVC shoe (set of four) of suitable size to legs of Chair Dining complete as shown in drawing and as specified (FD-279,228 & 203)

M&L for fixing MS right angle of size 50x25x5 mm thick on any one corner of Chair Dining by screwing to side rail and leg of Chair all as directed by Engr in charge(FD-279,228 & 203)

M & L for preparation of old treated wooden surfaces of Chair Dining as per drawing No (FD-279/227/260/16) and applying two coats of french polish complete all as specified and directed.

M&L for removal of existing broken / unserviceable front /back/ side rail of Chair dining cushioned, replacing the same with new teak wood front/back/side rail, size & dimension of the parts shall be of the same pattern/size as shown in drawing as well as in specification, fixed to main frame and legs of chair dining cushioned and apply two coats of french polich to all replaced parts to match with existing all as specified and directed (FD/E6/MAP/10(R)/10

All as per Item No. 9 above but replacing the front leg of chair dinning cushioned

All as per Item No. 9 above but replacing the back stiffner of chair dinning cushioned

M&L for removal of old unserviceable seat of chair dining cushioned and fixing new cushion of 75mm thick, 32 density foam seat, covered with fabric of approved colour fixed to 12mm thick commercial plywood seat of Chair Dining cushioned, complete all as specified and directed (FD/E6/MAP/10(R)/10, FD/MAP-II/04).

Removal of existing broken PVC shoe from all legs and replacing with new PVC shoe (set of four) of suitable size to legs of Chair Dining Cushioned as shown in drawing and as specified (FD/E6/MAP/10®/10, FD/MAP-II/04).

M&L for fixing MS right angle of size 50x25x5 mm thick on any one corner of Chair Dining cushioned by screwing to side rail and leg of Chair all as directed (FD/E6/MAP/10(R), FD/MAP-II/04).

M & L preparation of old treated wooden surfaces of Chair Dining cushioned as per drawing No (FD/E6/MAP/10(R)/10, FD/MAP-II/04). and applying two coats of french polish complete all as specified and directed.

M & L for removal of existing broken/ unserviceable front/back/ side rail of Chair dining JCO/OR, replacing the same with new teak wood front/back/side rail, size & dimension of the parts shall be of the same pattern/size as shown in drawing and specifications and fixed to main frame and legs of Chair dining JCO/OR and applying two coats of french polich to all replaced parts to match with existing all as specified and directed [FD/MAP-11/05]

All as per Item No. 16 above but replacing the front leg of chair dinning JCO/OR [FD/MAP-II/05]

All as per Item No 16 above but replacing the Rear leg of chair dinning JCO/OR [FD/MAP-II/05]

All as per Item No. 16 above but replacing the back rest/bend stiffener of chair dinning JCO/OR (FD/MAP- II/05

All as per Item No. 16 above but replacing the bottom stiffener of chair dinning JCO/OR [FD/MAP-II/05]

M&L for stiffener made out of 25 x 25 mm 1st class hard wood (Teak) having a length of 430 mm under PVC seat to sustain weight applied to chair dining by fixing horizontally between top of two side rails of chair dining suitable for fixing PVC seat over new stiffner and all exposed surfaces of replaced parts duly french polished complete all as specified and directed (FD/MAP-II/05)

M&L. for removal of old unserviceable broken PVC seat of chair dining JCO/OR and fix new PVC seat of make AMCO or equalent in Chair Dining JCO/OR complete all as specified and directed (FD/MAP-II/05)

Removal of existing broken PVC shoe from all legs and replacing with new PVC shoe (set of four) of suitable size to legs of Chair Dining JCO/OR as shown in drawing (FD/MAP-11/05)

M&L for fixing MS right angle of size 50x25x5 mm thick on any one corner of Chair Dining JCO/OR by screwing to side rail and leg of Chair all as specified and directed (FD/MAP-II/05).

M & L preparation of old treated wooden surfaces of Chair Dining JCO/OR and applying two coats of french polish complete all as specified and directed (FD/MAP-II/05)

Removal of existing broken/unserviceable front leg of chair writing, replacing the same with new front leg 1st class hard wood (Teak), size & dimension of the parts shall be of the same pattern/size as shown in drawing as well as specification and apply two coats of french polich to all replaced parts to match with existing all as specified and directed (FD-280/250)

All as per item No. 26 above but replacing rear leg of chair writing (FD-280/250)

All as per item No. 26 above but replacing back rest of chair writing (FD-280/250)

All as per item No. 26 above but replacing arm rest of chair writing (FD-280/250)

All as per item No. 26 above but replacing bottom stiffner of chair writing (FD-280/250)

All as per item No. 26 above but replacing front/back/side rail of chair writing (FD-280/250)

Removal of existing broken PVC shoe from all legs and replacing with new PVC shoe (set of four) of suitable size to legs of Chair writing complete all as shown in drawing and as specified (FD-280/250)

M&L for fixing MS right angle of size 50x25x5 mm thick on any one corner of Chair writing by screwing to side leg of Chair all as specified and directed by Engr in charge (FD-280/250)

M & L preparation of old treated wooden surfaces of Chair Writing and applying two coats of french polish complete all as specified and directed. (FD/280/250)

Removal of existing broken/unserviceable front/rear leg of Chair easy and replacing the same with new front/rear leg 1st class hard wood (Teak), size & dimension of the parts shall be of the same pattern/size as shown in drawing as well as specification and applying two coats of french polish to all replaced parts to match with existing all as specified and directed (FD-229 & 201)

All as per item No. 35 above but replacing arm rest of Chair easy (FD-229 & 201)

All as per item No. 35 above but replacing front/rear/back rail of seat frame of Chair easy (FD-229 & 201)

All as per item No. 35 above but replacing top/bottom/side rail of back rest frame of Chair easy (FD-229 &201)

M&L for removal of existing broken PVC shoe from all legs and replacing with new PVC shoe (set of four) of suitable size to legs of Chair easy as shown in drawing (FD-229/201)

MSL for fixing wooden right angle corner bracket of size 75x25 mm thick on any one corner of Chair easy by screwing to side rail and leg of Chair all as directed (FD-229/201)

M & L preparation of old treated wooden surfaces of Chair Easy and applying two coats of french polish complete all as specified (FD/229/201)

M&L for removal of existing foggy/broken mirror of Table dressing gents and replacing the same with new mirror not less than 5.0 mm thick and of size 1200x600 mm and fixing on the existing frame all as shown on drg and as specified (FD/E6/MAP/16)

M&L for removal of old broken plywood back of mirror of Table dressing gents and replacing the same with new 6 mm BWR plywood fixing to the existing frame all as shown on drg and as specified, FD/E6/MAP/16

S & F glass shelves of size 100x600x5 mm thick for Table dressing Gents complete all as specified and directed (FD/E6/MAP/16)

Removal of old broken leg of Table dressing gents and replacing the same with new 38x38x338 mm leg in 1st class hard wood (Teak) and 38x112x112 mm wooden bracket on top of leg fixing one side to wooden frame of mirror and other side to leg complete all as shown on drg and as specified (FD/E6/MAP/16)

M & L for preparation of old treated wooden surfaces of Table dressing Gents and applying two coats of french polish complete all as specified. (FD/E6/MAP/16)

M&L for removal of existing foggy/broken mirror of Table dressing Ladies and replacing the same with new mirror not less than 5.0 mm thick and of size 430 x 1230 mm and fixing on the existing frame all as shown on drg and as specified. FD/E6/MAP II/07

M&L for removal of old broken plywood back of mirror of Table dressing Ladies and replacing the same with new 6 mm BWR plywood fixing to the existing frame alongwith 25x20 mm wooden beading alround all as shown on drg and as specified. FD/E6/MAP II/07

M&L for removal of seat cushion of Table dressing Ladies with mirror (FD/E6/MAP II/07 and supply and fixing new foam cushion 75 mm thick having 32 density over 12 mm thick commercial plywood seat base. The foam cushion shall be duly stitched with tapestry cloth, cost of tapectry cloth used in the work shall be of not less than 350/- per meter and color, quality and design shall be approved by the GE complete all as shown in drg and as specified (FD/E6/MAP II/07)

M&L for removing old broken particle board top/side/bottom of table dressing ladies with mirror and replacing with 18 mm particle board exterior grade top/side/bottom drawer of Table dressing ladies with mirror all as shown in drg and as specified (FD/E6/MAP II/07)

S&F chromium plated handle to drawer of Table dressing Ladies all as shown in drawing and as specified (FD/E6/MAP II/07)

M&L for removal of old broken drawer of Table dressing Ladies and replacing the same with drawer of size as shown on drg and as specified (FD/E6/MAP II/07)

M&L for removal of old broken drawer of Table dressing Ladies and replacing the same with drawer of size as shown on drg and as specified (FD/E6/MAP II/07)

TABLE DINING FOR 6 PERS(FD/E6/MAP-II/03):- M&L for Top of size 1500mmx900mm made out of 18/19mm thick prelaminated particle board exterior grade, natural teak color, edges duly covered with 4 mm thick beading of teak wood as shown on drg and as specified

All as per Srl Item No. 54 here-in-before but legs made of 1st class teak wood as per size on drg

All as per Srl Item No. 54 here-in-before but long rail made of 1st class teak wood as per size on drg

All as per Srl Item No. 54 here-in-before but short rail made of 1st class teak wood as per size on drg

M &L for Corner Shape wooden bracket of size 4" x 4" and 35mm thick shall be fixed to legs and rail with adhesive and screws.(08 x Nos in each table)

Scratching the entire table, filling putty to the bore holes making surface smooth by scratching it with sand emery paper, it shall be French polish with high gloss finish ,after properly cleaned and smoothened the surface.

TABLE DINING FOR 4 PERS( FD/E6/MAP-II/03):- M&L for top of size 1200X900mm made out of 18/19mm thick prelaminated particle board exterior grade, natural teak color, edges duly covered with 4 mm thick beading of teak wood as shown on drg and as specified

All as per Srl Item No. 60 here-in-before but legs made of 1st class teak wood as per size on drg

All as per Srl Item No. 60 here-in-before but long rail made of 1st class teak wood as per size on drg

All as per Srl Item No. 60 here-in-before but short rail made of 1st class teak wood as per size on drg

M &L for Corner Shape wooden bracket of size 4" x 4" and 35mm thick shall be fixed to legs and rail with adhesive and screws.(08 x Nos in each table)

Scratching the entire table, filling putty to the bore holes making surface smooth by scratching it with sand emery paper, it shall be French polish with high gloss finish ,after properly cleaned and smoothened the surface.

M&L for removing existing broken/unserviceable leg of Teapoy FD-278, replacing the same with new leg Ist class hardwood (Teakwood) of size & dimension of the parts shall be of the same pattern / size as shown in drawing as well as specified and in applying two coats of french polish to all replaced parts to match with exisitng all as specfied and directed by Engr-in-charge

All as per Srl item No. 66 here-in-above, but replacing long rail of Teapoy FD-278

All as per Srl item No. 66 here-in-above, but replacing short rail of Teapoy FD-278

M & L preparation of old treated wooden surfaces of Teapoy and applying two coats of french polish complete all as specified and as directed.

M& L for removing existing broken/ unserviceable leg of Table centre (FD-274) replacing the same with new leg Ist class hardwood (Teakwood) of size & dimention of the parts shall be of the same pattern/size as shown in drawing and apply two coats of french polish to all replaced parts to match with exisitng all as specfied and directed by Engr-in-charge

All as per Srl item No.70 here-in-above but replacing long rail of Table centre. FD-274

All as per Srl item No.70 here-in-above but replacing short rail of Table centre. FD-274

M & L preparation of old treated wooden surfaces of Table centre and applying two coats of french polish complete all as specified and directed

M&L for removing existing broken/unserviceable leg of Table writing FD-275 replacing the same with new leg ist class hardwood (Teakwood) of size & dimention of the parts shall be of the same pattern/size as shown in drawing and apply two coats of french polish to all replaced parts to match with exisitng all as specfied and directed by Engr-in-charge

All as per Slrl item No. 74 here-in-above, but replacing long rail of Table writing FD-275

All as per Slrl item No. 74 here-in-above, but replacing short rail of Table writing FD-275

M&L for removal of existing damaged shutter of the table shelf of Table writing and replacing with new shutter 18mm thick one side teak veneered with 4mm thick teak wood beading alround fixed to the side with Piano hinges of MS and the shutter provided with a recessed handle 50 x 38 mm and also cupboard lock with duplicate keys including french polishing teak veneered surface and TW beading and fixed complete all as shown in drg and as specified FD-275

M&L for removal of existing damaged drawer of Table writing complete and replacing with new drawer of 18 mm prelaminated particle board and back plank base shall be 6mm thick commercial plywood and the drawer to be provided with a new recessed type handle 50 x 38 mm embedded in the drawer face, exposed portion duly french polished all as shown in drg and as specified. FD-275

M & L preparation of old treated wooden surfaces of Table writing and applying two coats of french polish complete all as specified and directed

M & L for removing unserviceable and broken plastic cane and cleaning entire surface of the Chair Dining and recanning with new plastic cane of size 1.8x0.46mm and boarder with 3.0x0.60mm size cane as per Godrej Pattern complete all as specified and directed (FD-16/227/260/279)

All as per Srl item No. 80 here-in-before, but for Chair Easy Seat only FD-229

All as per Srl item No. 80 here-in-before, but for Chair Easy back only FD-229

All as per Sl item No. 80 above, but for Chair writing back and seat FD-261/280

M&L for removing unserviceable handle of Almirah small steel/Almirah lagre steel/ replacing with chromium plated handle, 100 mm long, as per Godrej Pattern complete all as specified and directed. (FD-1031/1032/1033/350/351) (Note All furnitre repairs shall be carried out at various units / BSO yard as per the directions of Engr in charge Quoted rate is deemed to be inclusive of all subsequent expenditure occured on carrying out repair work at various sites/locations irrespective of floor levels)

M&L for One side leg of Almirah steel Large/small left or right, 70 mm wide and 100 mm high, open ends bent outwards upto 15 mm, MS sheet of 1.6 mm thick, welding the channel to bottom of almirah at 50 mm from the side of almirah including 2 coats of synthetic enamel paint olive green/smoke grey colour complete all as specified and directed.(FD-1031/1032/1033/350/351)

M&L for 3 way locking device as per Godrej pattern, fully operational with the existing handle duly painted all as specified and as directed (FD-1031/1032/1033/350/351)

M&L Steel cup board lock, 50 mm size, 6 lever with stainless steel keys in duplicate as per Godrej pattern all as specified and as directed (FD-1031/1032/1033/350/351)

M&L Steel cleats for supporting shelves suitable to existing type / model of almirah duly painted all as specified and as directed (FD-1031/1032/1033/350/351)

M&L preparation of old treated steel surfaces of Almirah large with shelves and applying two coat of synthetic enamel paint smoke grey/olive green colour complete all as specified and directed. FD-67(M)/1031/351

M & L preparation of old treated steel surfaces of Almirah medium with shelves and applying two coat of synthetic enamel paint smoke grey/olive green colour complete all as specified and as directed. FD-243/350/1032

M&L for replacing old broken left or right side frame including the side front /rear leg portions and the top handle portion of Chair Verandah, with new 20 mm dia 16 G steel conduit pipe of 1 mtr each shall be measured, duly welded to the seat frame and also to the 10mm dia MS rod in front Replaced conduit frame to be given 2 coats of synthetic enemel paint (white colour) over a coat of red oxide zinc chromate primer complete to match with existing color all as specified and as directed. (FD/MAP-II/15)

M&L for removing unserviceable / broken PVC seat & back from Chair verandah and fix new PVC seat & back with 4 mm ribs on back side all as specified and as directed (FD/MAP-II/15)

M&L for fixing 10 mm dia MS rod below PVC seat & back each by way of welding to both side of conduit pipes 20 mm dia horizonatally for supporting PVC seat & back and provide suitable provision on seat & back to place in tact on new stiffners of Chair Verandah all as specified and as directed (FD/MAP-II/15)

S&F new PVC shoes to bottom of legs of Chair verandah all as specified in drg and as directed (FD/MAP-II/15

M&L preparation of old treated steel surfaces of Chair Varandah and applying two coat of synthetic enamel white paint complete all as specified. FD/MAP-II/15

Removal of existing damaged top of Teapoy verandah and replacing the same with new top made out of 700 x 400 mm size, 18mm thick pre laminated particle board (White finish on top) with first class teak wood edging 3mm thick all sides duly fixed to the conduit frame with screws from below the conduit including french polishing TW edging complete all as shown in drg and as specified (FD/E6/MAP/17)

M & L preparation of old treated steel surfaces of Teapoy Varandah and applying two coat of synthetic enamel paint black colour complete all as specified and directed FD/E6/MAP/17

S&F new PVC shoes to bottom of legs of Teapoy verandah all as specified in drg and as directed (FD/MAP-II/15)

M&L 18mm thick Prelaminated particle board, laminated one side with decorative choice lamination & other side balancing white lamination to match with existing colour & texture as top/side/back of Table bedside with PVC edging including taking out old unserviceable board complete all as specified and directed. (Drg No FD/MAP/15(R))

M&L 18mm thick Prelaminated particle board, laminated one side with decorative choice lamination & other side balancing white lamination to match with existing colour & texture as in front shutter of Table bedside with PVC edging fixed with MS pinao hinges including taking out old unserviceable board complete all as specified and directed. (Drg No FD/MAP/15(R)

M & L 18mm thick Prelaminated particle board, laminated one side with decorative choice lamination & other side balancing white lamination to match with existing colour & texture as front and sides of drawer and bottom shall be fixed with 6 mm commercial plywood of Table bedside with PVC edging alround including taking out old unserviceable board complete all as specified and directed. (Drg No FD/MAP/15(R))

M&L for MS right angle of size 50x30x5 mm thick to fix table top of Table bedside by screwing to side shutter of table as directed FD/MAP/15R

S & F 50mm long, chromium plated handle suitable for Table bed side complete all as specified and as (Drg. No FD/MAP/15(R)) directed

S & F PVC shoe suitable for 25mm MS square pipe leg of Table bedside complete all as specified and directed (Drg No FD/MAP/15(R)

M & L preparation of old treated steel surfaces of Table Bed side steel (MAP) and apply two coat of synthetic enamel paint black colour complete all as specified and as directed. (FD/MAP/15(R))

Material and labour for painting shoe rack steel by peeling out the old paint by applying paint remover solution, filling metal putty to the uneven surfaces and sanding it to make the surface smooth then wipe out the surface and remove the dust with a fine cloth Two coats of hammer tone paint as per existing shade shall be applied externally and internally to complete shoe rack. The painting to each article shall only be carried out by spray machine only

BED HARD WITH PLYTOP (FD/MAP/E6/08(R)- M & L 18mm thick Prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination of size 630x185mm, screwed to MS strip, arc welded to 18mm size rectangular pipe as in head board of Bed hard with plytop (Drg No FD/MAP/08(R)) including taking out old unserviceable head board complete all as specified and directed by Engineer-in- Charge

M & L 18mm thick Prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination of size 630x310mm,, screwed to MS strip, arc welded to 18mm size rectangular pipe as in foot board of bed hard (Drg No FD/MAP/08(R)) including taking out old unserviceable foot board complete all as specified and directed by Engineer-in-Charge

M & L 45x20x5mm size MS flat iron for fixing head/foot board, arc welded to rectangular pipe of bed hard. (Drg No FD/MAP/08(R)) apply two coats of synthetic enamel paint over a coat of red oxide primer to MS fiat after welding including taking out old unserviceable MS strip of any size complete all as specified and directed by Engineer-in-Charge

M&L 25x25x1.25mm thick MS square tube, 850mm long, as in stiffner of bed hard, welded to long rail (Drg No FD/MAP/08(R)), apply two coats of synthetic enamel paint over a coat of red oxide primer to MS pipe after welding including taking out old unserviceable MS pipe of any size complete all as specified and directed by Engineer-in-Charge

M & L 12mm thick ply wood top BWR grade confirming to IS 303 as in bed hard (Drg No FD/MAP/08(R)) screwed to stiffner including taking out old unserviceable plywood complete all as specified and directed by Engineer-in-Charge (Make Kitply/Century/Everest/Anchor)

S & F rubber shoes suitable for 38x38mm MS square tube as leg of bed hard (Drg No FD/MAP/08(R) complete all as specified and directed by Engineer-in-Charge

M & L preparation of old treated steel surfaces of Bed Hard MAP as per drawing and applying a coat of synthetic enamel black paint complete all as specified.

Charpoy IP with hard top (FD/MAP-II/01):- M & L 45x20x5mm size MS flat iron for fixing head/foot board, arc welded to rectangular pipe of bed hard, (Drg No FD/MAP/08(R)) apply two coats of synthetic enamel pairit over a coat of red oxide primer to MS flat after welding including taking out old unserviceable MS strip of any size complete all as specified and directed by Engineer-in-Charge

M&L 25x25x1.25mm thick MS square tube 850mm long, as in stiffner of bed hard, welded to long rail (Drg No FD/MAP/08(R)), apply two coats of synthetic enamel paint over a coat of red oxide primer to MS pipe after welding including taking out old unserviceable MS pipe of any size complete all as specified and directed by Engineer-in-Charge

M&L 12mm thick ply wood top BWR grade confirming to IS 303 as in bed hard (Drg No FD/MAP/08(R)), screwed to stiffner including taking out old unserviceable plywood complete all as specified land directed by Engineer-in-Charge (Make: Kitply/Century/Everest/Anchor)

S & F rubber shoes suitable for 38x38mm MS square tube as leg of bed hard (Drg No FD/MAP/08(R)) complete all as specified and directed by Engineer-in-Charge

M&L preparation of old treated steel surfaces of Charpoy as per drawing and applying a coat of synthetic enamel black paint complete all as specified

M/s.DSRK CONSTRUCTIONS (BID ID -3082946)