Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.4 LAccepted-AOC VILL AND P O BERENGA PT II PS SILCHAR DIST CACHAR ASSAM PIN 788005 | SILCHAR | CACHAR | ASSAM | 788005 | ₹6.4 L | L1 | Accepted-AOC L1 Agency |
| 2 | L2₹6.4 L+₹8,955.85 (1.41%)Rejected-Finance | ₹6.4 L+₹8,955.85 (1.41%) | L2 | Rejected-Finance Higher |
| 3 | L3₹6.6 L+₹26,867.55 (4.23%)Rejected-Finance | ₹6.6 L+₹26,867.55 (4.23%) | L3 | Rejected-Finance Higher |
Tender Value
₹4.5 L
Closing Date
12 May 2026, 2:00 pmClosed
Registrar NIT Silchar
Registrar NIT Silchar
Construction of Reception Counter with Laminated Plyboard at the ID Card Section and a cubicle for Assistant Librarian with Aluminum Partition Wall at the Central Library of NIT Silchar.
2026_NS_907461_1
NIT/Estate/Limited/2026-27/01 Sl. No. 02
Limited
Civil Works
Percentage
NIT Silchar
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
Exempted
31 Aug 2026
6 May 2026
13 May 2026
6 May 2026
12 May 2026
6 May 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing and fixing 19 mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS : 710 of approved brand boxes,sheIves,racks,aImirah,cupboard and drawer etc. including necessary naiIs,screws etc. complete as per direction of Engineer-in-charge. | 33 | Sqm | 2,696.88 | ₹88,996.91 |
| 2 | Providing and fixing 2 mm thick 16 to 19 mm wide PVC edge binding tape of approved quality for cupboard/wardrobe shutters including necessary synthetic resin hot pressed to edges on binding machine etc. complete as per direction of Engineer- in-charge. | 50 | m | 45.55 | ₹2,277.6 |
| 3 | Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1.0 mm thick | 66 | Sqm | 933.19 | ₹61,590.67 |
| 4 | Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately). | 6.1 | Sqm | 5,538.94 | ₹33,787.51 |
| 5 | Providing and fixing stainless steel soft closing heavy type telescopic drawer channels of approved make 500 mm long with screws etc. complete as per direction of Engineer- in-charge. | 8 | one set | 920.5 | ₹7,364.03 |
| 6 | Providing and fixing stainless steel fancy handle of approved make fixed with SS screws etc. complete as per direction of Engineer-in-charge. 200 mm | 10 | Each | 194.12 | ₹1,941.16 |
| 7 | Providing and fixing stainless steel soft closing spring hinges at 0 degree hinges (hydraulic type) of approved make/brand to cupboard shutters with full threaded steel screws including making necessary recess in board and finished etc. complete as per direction of Engineer-in-charge | 2 | Each | 282.88 | ₹565.76 |
| 8 | Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc.complete.Size 50 mm | 10 | Each | 347.31 | ₹3,473.08 |
| 9 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). | 50 | kg | 803.3 | ₹40,164.8 |
| 10 | Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete : 2nd class teak wood, 50 x 20 mm | 25 | m | 282.62 | ₹7,065.5 |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 6.72 MB
BOQ_953797.xls
BOQ • 0.25 MB
Termsconditions.pdf
Additional Documents • 1.15 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .