Providing Street Lights Between Akkulam Karikkakam in NH 66 Kazhakkoottam Kovalam Stretch Street Lighting

Amount

14.1 Excavation for foundation in soft soil including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 metres.

14.7 Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc including form work etc as required.

14.10 Providing and laying in position reinforced cement concrete 1 :2:4 (1 cement : 2coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump,DG set etc. including form work etc. as required (excluding reinforcement).

14.12 Providing 15mm thick cement plaster of mix 1:4(1 cement: 4 fine sand) at all levels

90.15.3.10Supply installation testing and commissioning of Octogaonal Pole made of hot dipgalvanised GI sheet 70 mm top diameter, 155 mm bottom diameter thickness 3mm base plate dimensions of 250x250x16 mm suitable for wind speed as per IS 875 PartIII double arm bracket 0.5mt including connector foundation bolt 4 nos fixed in existing RCC foundation and junction box etc, complete 9 Meters

OD44913/2024-2025 Supply Conveyance, installation, testing and commissioning of 180W (tolerance +/- 10W maximum) dimmable type LED street light output greater than 140lumen/W(minimum 23800 lumens output) 4000-6000 K with IP 66 protection LED Chip make Cree / Lumilled / Nichea / OSRAM / SEOUL / EDISON / GE with power factorgreater than 0.95 at full load, internal surge protection of minimum 4 KV, external surge protection up to 10 KV with life expectancy more than 50000 glow hours at 35degree Celsius constant temperature with 70% lumen maintenance and Aluminium pressure die-cast Powder coated housing with corrosion resistant polyester powdercoating, acrylic cover complete with THD less than 10%, power factor greater than 0.98,CRI greater than 70%,RoHS compliant, duly wired up for use on 230 V ACsupply. Driver compartment should be separately accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be producedmentioning chip manufacturer) Minimum warranty of 5 years from the date of commissioning.

OD39727/2024-2025 Fabrication , supply ,Testing and commisioning of 3 Phase 25 KVA CCMS panel using 1.6mm CRCA sheet, powder coated for monitoring /switching/dimming of LED street lights with turn group of Lights ON/OFF at user defined times, capable of dimming from 10% to 100% for lights supporting dimming ,set schedules based on precise astronomical clock,Three phase energy metering to measure and report Voltage ,current, Power factor , Active power , Reactive power , KWH, KVAh etc.Estimates & reports lamp failure ,panel door open,mains power failure,power theft etc, via email/SMS.Generates report for energy consumption,failures,burning hours etc. weekly/Fortnightly/monthly. metal enclosure.Includes lifetime software license and maintenance ,remote commisioning charges and communication charges for 2 years.

90.6.5.19 Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.4 core 2.50 sq mm

OD38291/2024-2025 Supply and fixing SMC waterproof junction box

90.12.5.42 Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.4 core 25 sq mm

90.12.5.44 Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.4 core 50 sq mm

90.12.5.45 Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.4 core 70 sq mm

9.1.23 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 70 sq. mm (38mm)

9.1.34 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 25 sq. mm (28mm)

9.1.36 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 50 sq. mm (35mm)

90.12.10.2 Supply & laying of DWC pipe in ordinary soil 0.75m below ground level including excavation50/38 mm or nearest size

90.12.10.3 Supply & laying of DWC pipe in ordinary soil 0.75m below ground level including excavation63/50 mm or nearest size

90.12.10.6 Supply & laying of DWC pipe in ordinary soil 0.75m below ground level including excavation110/94 mm or nearest size

5.4 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

5.11 Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and refilling etc. as required.

90.16.1.4 Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required4.00 mm copper conductor ( 8 SWG)

90.16.5.4 Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.4.00 mm (8 SWG)

90.14.1.2 Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623.<br> Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame)

90.14.3.1 Supply and providing heavy duty 'A' section neoprene gasket in the panel boardA' section neoprene beeding suitable for 1.60/ 2.00 mm sheet

90.14.5 Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board

OD37251/2024-2025 Supply and fixing 100A, 415 V, 2 way neutral link mounted on DMC/ SMC base in the existing meter board and giving connections etc.

OD37252/2024-2025 Supply and fixing 100A backelite fuse base with HRC fuse link in the existing meter board and giving connections etc

2.10.1 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole

90.14.10.3 Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.16 A-100A, 16 kA (Ics=100%Icu), 4 pole, current limiting type MCCB having thermal setting range of 80 - 100% with thermal magnetic release having adjustable OL

90.14.11.1 MCCB AccessoriesSupply and fixing one number earth fault Relay up to 100A with CBCT.

90.14.11.12 MCCB AccessoriesSupply and fixing shunt release for all voltage range up to 630A.

90.14.11.13 MCCB AccessoriesSupply and fixing rotary handle, External type (including BUC handle with door interlock ) in the existing MCCB of rating up to 250 A

OD38286/2024-2025 Charge for Horizontal Directional Road Drilling as per the instructions of Engineer / Officer in charge and NHAI regulations

5.22.1 Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelMild steel and Medium Tensile steel bars

4.1.8 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

13.71 Lettering with black Japan pint of approved brand and manufacture

KERALA ELECTRICAL AND ALLIED ENGINEERING CO LTD (KEL)