Loading
Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹69.4 L
Closing Date
21 Oct 2026, 3:00 pm
Yes (up to 3 members)
Two Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
90 days
Expenditure
Capital (Works)
22 conditions · 10 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less, where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Please submit required information as per attached annexure-VIB along with audited balance sheets.
The tender/technical bid will be evaluated based on the bid capacity formula detailed as Annexure-VI
10.2. Financial Eligibility Criteria: The tenderer must have minimum averageannualcontractual turnover of V/N or 'V' whichever is less; where V= Advertised value ofthe tenderin crores of Rupees N= Number of years prescribed for completion of workfor which bidshave been invited. The average annual contractual turnover shall becalculated as anaverage of "total contractual payments" in the previous three financialyears, as per theaudited balance sheet. However, in case balance sheet of the previousyear is yet to beprepared/ audited, the audited balance sheet of the fourth previousyear shall be consideredfor calculating average annual contractual turnover. Thetenderers shall submit requisiteinformation as per Annexure-VIB, along with copies ofAudited Balance Sheets duly certifiedby the Chartered Accountant/ Certificate fromChartered Accountant duly supported byAudited Balance Sheet.
Balance Sheet Declaration- Balance sheet for the 4th previous year (i.e. FY 2022-23 orasapplicable) as per para 10.2 of GCC-2022 shall be considered in evaluation offinancialeligibility criteria only when it is clearly certified in Annex-VI B or a self declaredcertificate to be attached duly signed by chartered accountant and the tenderer that thebalance sheet oflast financial year (i.e. FY 2025-26 or as applicable) has not beenaudited/yet to beprepared. If, balance sheet of last financial year (i.e. FY 2025-26 or asapplicable) is not yetaudited/ prepared ,then NIL position to be uploaded.
The tenderer must have successfully completed or substantially completed any of the following works during last 07 (seven) years, ending last day of month previous to the one in which tender is invited, under Government /Semi Government /PSU: Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work each costing not less than the amount equal to 60% of advertised value of the tender.
Substantially Completed Work means an ongoing work in which payment equal to or more than 90% of the present contract value (excluding the payment made for adjustment of Price variation (PVC), if any) has been made to the contractor in that ongoing contract and no proceedings of termination of contract on Contractor's default has been initiated. The credential certificate in this regard should have been issued not prior to 60 days of date of invitation of present tender. 2. In case a work is started prior to 07 (seven) years, ending last day of month previous to the one in which tender is invited, but completed in last 07 (seven) years, ending last day of month previous to the one in which tender is invited, the completed work shall be considered for fulfillment of credentials. 3. If a work is physically completed and completion certificate to this extent is issued by the concerned organization but final bill is pending, such work shall be considered for fulfillment of credentials 4. In case of completed work, the value of final bill (gross amount) including the PVC amount (if paid) shall be considered as the completion cost of work. In case final bill is pending, only the total gross amount already paid including the PVC amount (if paid) shall be considered as the completion cost of work. In case of substantially completed work, the total gross amount already paid including the PVC amount (if paid), as mentioned in the certificate, shall be considered as the cost of substantially completed work.
Definition of similar nature of work :- Any Signalling work involving design,installation,testing,comissioning of EI or Alteration of EI.
10.1 Technical Eligibility Criteria: (a)The tenderer must have successfully completedorsubstantially completed any one of the following categories of work(s) during last 07(seven)years, ending last day of month previous to the one in which tender is invited: (i)Threesimilar works each costing not less than the amount equal to 30% of advertisedvalue of thetender, or (ii)Two similar works each costing not less than the amount equalto 40% ofadvertised value of the tender, or (iii)One similar work costing not less thanthe amountequal to 60% of advertised value of the tender. (b)(1) In case of tenders forcomposite works(e.g. works involving more than one distinct component, such as CivilEngineering works,S&T works, Electrical works, OHE works etc. and in the case of majorbridges - substructure,superstructure etc.), tenderer must have successfully completedor substantially completedany one of the following categories of work(s) during last 07(seven) years, ending last dayof month previous to the one in which tender is invited:(i)Three similar works each costingnot less than the amount equal to 30% of advertisedvalue of each component of tender, or(ii)Two similar works each costing not less thanthe amount equal to 40% of advertised valueof each component of tender, or (iii)Onesimilar work each costing not less than the amountequal to 60% of advertised value ofeach component of tender. Note for b(1): Separatecompleted works of minimumrequired values shall also be considered for fulfillment oftechnical eligibility criteria fordifferent components. (b)(2)In such cases, what constitutes acomponent in a compositework shall be clearly pre-defined with estimated tender cost of it,as part of the tenderdocuments without any ambiguity. (b) (3) To evaluate the technicaleligibility oftenderer, only components of work as stipulated in tender documents forevaluation oftechnical eligibility, shall be considered. The scope of work covered in otherremainingcomponents shall be either executed by tenderer himself if he has workexperience asmentioned in clause 7 of the Standard General Conditions of Contractorthroughsubcontractor fulfilling the requirements as per clause 7 of the StandardGeneralConditions of Contract or jointly i.e., partly himself and remaining throughsubcontractor,with prior approval of Chief Engineer in writing.
However, if required in tender documents by way of Special Conditions, a formalagreementduly notarised, legally enforceable in the court of law, shall be executed bythe maincontractor with the subcontractor for the component(s) of work proposed to beexecuted bythe subcontractor(s), and shall be submitted along with the offer forconsidering sublettingof that scope of work towards fulfilment of technical eligibility.Such subcontractor mustfulfill technical eligibility criteria as follows: The subcontractorshall have successfullycompleted at least one work similar to work proposed forsubcontract, costing not less than35% value of work to be subletted, in last 5 years,ending last day of month previous to theone in which tender is invited through a workscontract. Note: for subletting of work costingup to Rs 50 lakh, no previous workexperience of subcontractor shall be asked for by theRailway. In case after award ofcontract or during execution of work it becomes necessaryfor contractor to changesubcontractor, the same shall be done with subcontractor(s)fulfilling the requirementsas per clause 7 of the Standard General Conditions of Contract,with prior approval ofChief Engineer in writing. Note for Item 10.1: Work experiencecertificate from privateindividual shall not be considered. However, in addition to workexperience certificatesissued by any Govt. Organisation, work experience certificate issuedby Public listedcompany having average annual turnover of Rs 500 crore and above in last3 financialyears excluding the current financial year, listed on National Stock Exchange orBombayStock Exchange, incorporated/registered at least 5 years prior to the date of closingoftender, shall also be considered provided the work experience certificate has beenissuedby a person authorized by the Public listed company to issue such certificates. Incasetenderer submits work experience certificate issued by public listed company, thetenderershall also submit along with work experience certificate, the relevant copy ofwork order, billof quantities, bill wise details of payment received duly certified byChartered Accountant,TDS certificates for all payments received and copy of final/lastbill paid by company insupport of above work experience certificate.
Bidder has to upload requisite information as per Annexure V(A) along with the offer
47 conditions · 11 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Stamp Duty fee for Bank Guarantee (for bid security) should be paid whichshouldbe 0.5% of the Bid security or Rs.10,000/-, whichever is less or as perlatest/revisedstate policy of UP state
The tenderer whether sole proprietor / a company or a partnership firm /jointventure (JV) /registered society / registered trust / HUF / LLP etc if theywant to actthrough agent or individual partner(s), should submit along with thetender, a copyof power of attorney duly stamped and authenticated by aNotary Public or byMagistrate in favour of the specific person whether he/theybe partner(s) of the firmor any other person, specifically authorizing him/themto sign the tender, submit thetender and further to deal with the Tender/Contract up to the stage of signing theagreement except in case where suchspecific person is authorized for abovepurposes through a provision made inthe partnership deed / Memorandum ofUnderstanding / Article of Association/Board resolution, failing which tender shallbe summarily rejected. A separatepower of attorney duly stamped andauthenticated by a Notary Public or byMagistrate in favour of the specific personwhether he/they be partner(s) of thefirm or any other person, shall be submittedafter award of work, specificallyauthorizing him/them to deal with all othercontractual activities subsequent tosigning of agreement, if required. Note: A Powerof Attorney executed andissued overseas, the document will also have to belegalized by the IndianEmbassy and notarized in the jurisdiction where the Power ofAttorney is beingissued. However, the Power of Attorney provided by Bidders fromcountries thathave signed the Hague Legislation Convention 1961 are not requiredto belegalized by the Indian Embassy if it carries a conforming Apostille certificate.(Note:In case of non-submission of above documents, offer may besummarilyrejected)
The tenderer will give full information ( in annexure-A) as to the date ofretirementof such Engineer or gazetted officer from the said service and as towhetherpermission for taking such contract, or if the Contractor be apartnership firm or anincorporated company, to become a partner or directoras the case may be, hasbeen obtained by the tenderer or the Engineer orofficer, as the case may be fromthe President of India or any officer, dulyauthorized by him in this behalf, shall beclearly stated in writing at the time ofsubmitting the tender,if a tenderer is - i) be aretired Engineer of the gazettedrank or any other gazetted officer working beforehis retirement, whether in theexecutive or administrative capacity or whetherholding a pensionable post ornot, in the Engineering or any other department ofany of the railways ownedand administered by the President of India for the timebeing, OR ii) beingpartnership firm / joint venture (JV) / registered society /registered trust etchave as one of its partners/members a retired Engineer of thegazetted rank orany other gazetted officer working before his retirement, OR iii)being anincorporated company have any such retired Engineer of the gazettedrank orany other gazetted officer working before his retirement as one of itsdirectorsAND in case where such Engineer or officer had not retired fromgovernmentservice at least 1 year prior to the date of submission of the tende
If a tenderer or Contractor being an individual, have member(s) of his familyor inthe case of partnership firm/ company / joint venture (JV) / registeredsociety /registered trust etc. one or more of his partner(s)/shareholder(s) ormember(s) ofthe family of partner(s)/shareholder(s) having share of more than1% in thetendering entity employed in gazetted capacity in the Engineering orany otherdepartment of the railway, then the tenderer at the time ofsubmission of tender,will inform the authority inviting tenders the details ofsuch persons. ( in annexure-A)
An undertaking shall be submitted by sole proprietorship firm, HUF, JV,LLP,Company registered under companies Act 2013 that he/they are notblacklisted ordebarred by Railways or any other Ministry / Department of theGovt. of India fromparticipation in tenders / contracts as on the date ofopening of bids, either in theirindividual capacity or in any firm in which theywere / are partners. Concealment /wrong information in regard to above shallmake the contract liable fordetermination under Clause 62 of the GeneralConditions of Contract.(Note: Eachmember must sign separately in case ofJV/Partnership firm/LLP.).(Note: IN case ofnon submission of above documents,offer may be summarily rejected).
In case of partnership firm an undertaking shall be submitted by all partners ofthepartnership firm that they are not blacklisted or debarred by Railways orany otherMinistry / Department of the Govt. of India from participation intenders / contractsas on the date of submission of bids, either in theirindividual capacity or in any firmin which they were / are partners.Concealment / wrong information in regard toabove shall make the contractliable for determination under Clause 62 of theGeneral Conditions of Contract.(Note: In case of non-submission of abovedocuments, offer may be summarilyrejected)
Please submit your bank details i.e.Name of the Bank along with Bank BranchCode,Account Number, IFSC Code, and PAN Number
Please furnish list of plant and Machinery available on hand own and proposedto beinducted own and hired to be given separately for the subject work.
Please furnish list of Works on hand indicating Description of Work, ContractValue,Approximate value of balance work yet to be done and Date of award.
Please furnish list of personal, organization available on hand and proposed tobeengaged for the subject work.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Validity of offer is 90 days. Any rebate if offered shall also be valid for 90 days.
In case of any discrepancies and doubt between this tender document andGCC-2022, Provisions of GCC-2022 including correction slip ACS 1 , ACS 2,ACS3 ,ACS4 ,ACS5 ,ACS6 ,ACS7,ACS8,ACS9,ACS10,ACS11 and ACS12will prevail over (same is attached along with tender).
Whether the cost of tender form is submitted in hard copy if uploaded as ascannedcopy in website
Whether the cost of Bid Security is submitted in hard copy if uploaded as ascannedcopy in website.
16.(1) Security Deposit: The Security Deposit shall be 5% of the contractvalue. TheBid Security submitted by the Contractor with his tender will beretained/encashedby the Railways as part of security for the due and faithfulfulfilment of the contractby the Contractor. Provided further that, if Contractorsubmits the Cash or TermDeposit Receipt issued from a Scheduled commercialbank of India or irrevocableBank Guarantee Bond from a Scheduledcommercial bank of India, either towardsthe Full Security Depositor the PartSecurity Deposit equal to or more than BidSecurity, the Railway shall returnthe Bid Security, to the Contractor. Balance ofSecurity Deposit may bedeposited by the Contractor in cash or Term DepositReceipt issued fromScheduled commercial bank of India or irrevocable BankGuarantee bondissued from Scheduled commercial bank of India, or may berecovered at therate of 6% of the bill amount till the full Security Deposit isrecovered. Providedalso that in case of defaulting Contractor, the Railway mayretain any amountdue for payment to the Contractor on the pending "on accountbills" so that theamounts so retained (including amount guaranteed throughPerformanceGuarantee) may not exceed 10% of the total value of the contract.TheIrrevocable Bank Guarantee submitted towards Security deposit shall beinitiallyvalid up to the stipulated date of Maintenance period plus 60 days andshall beextended from time to time, depending upon extension of contractgranted in termsof Clause 17A and 17B of the Standard General Conditions ofContract. Note:Security Deposit deposited in cash by the Contractor orrecovered from the runningbills of a Contractor or submitted by contractor asTerm Deposit Receipt(s) can berefunded/returned to the contractor, in lieu ofirrevocable Bank Guarantee bondissued from scheduled commercial bank ofIndia, to be submitted by him, for anamount equal to or more than the alreadyavailable Security Deposit, providedhowever that, in a contract of value lessthan Rs. 50 Crore, such refund/ return ofthe already available Security Depositis permitted up to two times and in acontract of value equal to or more thanRs. 50 Crore, such refund / return of thealready available Security Deposit ispermitted up to three times
16.(4) Performance Guarantee:- The procedure for obtainingPerformanceGuarantee is outlined below: (a)The successful bidder shall haveto submit aPerformance Guarantee (PG) within 21 (Twenty-one) days from thedate of issue ofLetter of Acceptance (LOA). Extension of time for submission ofPG beyond 21(Twenty-one) days and upto 60 days from the date of issue ofLOA may be given bythe Authority who is competent to sign the contractagreement. However, a penalinterest of 12% per annum shall be charged forthe delay beyond 21(Twenty-one)days, i.e. from 22ndday after the date ofissue of LOA. Further, if the 60thdayhappens to be a declared holiday in theconcerned office of the Railway, submissionof PG can be accepted on the nextworking day. In all other cases, if the Contractorfails to submit the requisite PGeven after 60 days from the date of issue of LOA, thecontract is liable to beterminated. In case contract is terminated railway shall beentitled to forfeit BidSecurity and other dues payable to the contractor against thatparticularcontract, subject to maximum of PG amount. In case a tenderer hasnotsubmitted Bid Security on the strength of their registration as a Startuprecognizedby Department of Industrial Policy and Promotion (DIPP) underMinistry ofCommerce and Industry, DIPP shall be informed to this effect. Thefailed Contractorshall be debarred from participating in re-tender for that work.
(b)The successful bidder shall submit the Performance Guarantee (PG)in any ofthe following forms, amounting to 5% of the original contractvalue: - (i)Adeposit of Cash; (ii)Irrevocable Bank Guarantee;(iii)Government Securitiesincluding State Loan Bonds at 5% below themarket value; (iv)Pay Orders andDemand Drafts tendered by anyScheduled Commercial Bank of India;(v)Guarantee Bonds executed orDeposits Receipts tendered by any ScheduledCommercial Bank ofIndia; (vi)Deposit in the Post Office Saving Bank;(vii)Deposit in theNational Savings Certificates; (viii)Twelve years NationalDefenceCertificates; (ix)Ten years Defence Deposits; (x) NationalDefenceBonds and (xi) Unit Trust Certificates at 5% below market value oratthe face value whichever is less. Also, FDR in favour of Sr. DFM (freefrom anyencumbrance) may be accepted. (c)The PerformanceGuarantee shall besubmitted by the successful bidder after the Letterof Acceptance (LOA) hasbeen issued, but before signing of the contractagreement. This P.G. shall beinitially valid upto the stipulated date ofcompletion plus 60 days beyond that.In case, the time for completion ofwork gets extended, the Contractor shall getthe validity of P.G.extended to cover such extended time for completion ofwork plus 60days. (d)The value of PG to be submitted by the Contractor isbased onoriginal contract value and shall not change due tosubsequentvariation(s) in the original contract value. (e)ThePerformanceGuarantee (PG) shall be released after physical completion of theworkbased on 'Completion Certificate' issued by the competentauthoritystating that the Contractor has completed the work in allrespectssatisfactorily. (f)Whenever the contract is rescinded, thePerformanceGuarantee already submitted for the contract shall be encashed.(g)TheEngineer shall not make a claim under the PerformanceGuaranteeexcept for amounts to which the President of India is entitled underthecontract (not withstanding and/or without prejudice to any otherprovisionsin the contract agreement) in the event of: (i)Failure by theContractor toextend the validity of the Performance Guarantee asdescribed herein above, inwhich event the Engineer may claim the fullamount of the PerformanceGuarantee. (ii)Failure by the Contractor topay President of India any amountdue, either as agreed by theContractor or determined under any of theClauses/Conditions of theAgreement, within 30 days of the service of notice tothis effect byEngineer. (iii)The Contract being determined or rescinded underclause62 of these conditions
Balance sheet for the 4th previous year (i.e. FY 2022-23 or as applicable fortheinstance tender) as per para 10.2 of GCC-2022 shall be considered inevaluation offinancial eligibility criteria only when it is clearly certified inAnnex-VI B or a selfdeclared certificate duly signed by chartered accountantand the tenderer that thebalance sheet of last financial year (i.e. FY 2025-26or as applicable for the instancetender) has not been audited/yet to beprepared. Annexure has been attached forsuch certificate format
All Rules of NIT & Post LOA shall be governed by GCC & tenderer agree toadhere toit without any dispute
General Conditions of Contract-2022 has been added in tender document.Please gothrough this General Condition of Contract-2022 along with advancedcorrectionslips before bidding. In case of any discrepancy, contradiction withregard to GCC(except special condition of contract) in that case GCC- 2022 willbe applicable
Reference ESP/SIP have been attached with tender for referrence. There may be changes in drawing during final approval
Supply, Designing, Installation, testing and commissioning of Electronic interlocking system with complete Signalling and Telecom Indoor and Outdoor works at Stations (i.e. Vishwanathpuri,Sakteshgarh, Churk and Agorykhas) and alteration in existing EI at Chunar ,Lusa ,Sarson Gram and Sonbhdra stations in connection with Chunar- Lusa and Sonbhdra-Chopan(Ex) double line work of Prayagraj Division of North central Railway.
SIG-WS-CONTRACT-585~NCR
SIG-WS-CONTRACT-585
Open
Works - General
24 Months
Prayagraj, Uttar Pradesh
₹0
₹69.4 L
21 Sept 2026
21 Sept 2026
7 Oct 2026
457 items across 4 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 8,67,75,328.52 | ||
| — | 4.00 | — | — | ||
| Design, Manufacture & Supply of Electronic Interlocking (EI) System at Vishwanathpuri,Sakteshgarh, Churk and Agorykhas Station with 'Hot Standby architecture' as per RDSO Specifi cation No. RDSO/SPN/192/2019 Ver. 2.0 or latest from RDSO approved source only. EI system shall be provided to operate with dual VDU Control Terminal. It shall mainly consist of:(1) EI Microprocessor Equipments/Electronic PCB cards etc.(2) All type of Interfacing relays, proposed to be wired inside the EI Equipment and Relay room, i.e. Q Series neutral line/special type ACI/ Non ACI relays etc. In case of OEM specifi c relays with Non-RDSO approved contact confi guration, if any, being supplied, the cost of such relays shall be included in the cost of EI (Electronic Interlocking) system. However, the number and type of such relays shall be indicated separately.(All types of outdoor relays like QTA2 etc. relays should not be included as a part of EI breakup). (3) EI Equipment racks and EI Relay racks. Cable termination rack to be supplied separately in Schedule and not as a part of EI breakup.(4) In-built Event logger, Power Supply Equipments (DC-DC Converters shall be provided in N+1 confi guration) (5) Indoor cables, Wires, Fuses, Fixtures, Mounting arrangements,Communication arrangements etc. along with all accessories required to make complete EI system functional.(6) Surge and lightning protection devices compatible to RDSO standards and as recommended by OEM (7) All the documents as proposed in the para 10.2 of the RDSO spec.No. RDSO/SPN/192/2019 Ver. 2.0 or latest (8) Operation VDU console, 02 (Two No.). The embedded fan less industrial grade PCs to be supplied as Operation terminals shall comply with the specifi cations as described in RDSO TAN/3007, Version 1.0 dated 02.11.12 or better. The size of the VDU shall be clearly specified by the Railways. NOTE:- The size of the VDU shall be 43" .Inspection:By RDSO. However items not covered under RDSO inspection will be inspected by the Representative of DY.CSTE/C/PRYJ. Note:- EI will be centralized for upto 100 routes and beyond more than 100 routes will be Distributed EI. | — | — | — | 5,87,43,026.36 | |
| — | 1.00 | — | — | ||
| Modification/Alteration in existing Electronic Interlocking System as per latest RDSO guidelines/TAN. It includes: Design and modifi cation in existing Interface and Interlocking circuits and logic of EI system including modifi cation in the VDU(Video Display Unit)/ LCP(Local Control panel)/ CCIP (Control cum Indication Panel), Maintenance terminal (MPC), Data Logger, Relay rack wiring. Th e complete work should comply with the latest RDSO specifi cations and guidelines and as per approved SIP and circuit diagrams. All the material (Interface cards / relays / wiring material / connectors / fuses / communication devices etc.) shall be provided by the contractor. Th e work also includes the supply of modified Selection table, Interface Circuits, VDU/ LCP/CCIP diagram etc. to suit the modified SIP. It also includes the carrying out of FAT, SAT (as applicable) jointly with Railways and satisfactory commissioning. All plans/drawings/circuits etc. should be prepared on AUTO CAD, soft copy to be supplied on Pen Drive and 06 sets of hard copies also to be supplied .Note:- This item covers Modification/Alteration in EI at Chunar, Lusa ,Sarson Gram and Sonbhdra (Existing EI) and Modification/Alteration in New EI at Sakteshgarh and Agorykhas in case Phased commissioning.Alteration involving modification from 11 up to 20 routes. | — | — | — | 25,64,630 | |
| — | 120.00 | — | — | ||
| Modification/Alteration in existing Electronic Interlocking System as per latest RDSO guidelines/TAN. It includes: Design and modifi cation in existing Interface and Interlocking circuits and logic of EI system including modifi cation in the VDU(Video Display Unit)/ LCP(Local Control panel)/ CCIP (Control cum Indication Panel), Maintenance terminal (MPC), Data Logger, Relay rack wiring. Th e complete work should comply with the latest RDSO specifi cations and guidelines and as per approved SIP and circuit diagrams. All the material (Interface cards / relays / wiring material / connectors / fuses / communication devices etc.) shall be provided by the contractor. Th e work also includes the supply of modified Selection table, Interface Circuits, VDU/ LCP/CCIP diagram etc. to suit the modified SIP. It also includes the carrying out of FAT, SAT (as applicable) jointly with Railways and satisfactory commissioning. All plans/drawings/circuits etc. should be prepared on AUTO CAD, soft copy to be supplied on Pen Drive and 06 sets of hard copies also to be supplied .Note:- This item covers Modification/Alteration in EI at Chunar, Lusa ,Sarson Gram and Sonbhdra (Existing EI) and Modification/Alteration in New EI at Sakteshgarh and Agorykhas in case Phased commissioning.Alteration involving modification more than 20 routes. | — | — | — | 1,53,87,780 | |
| — | 4.00 | — | — | ||
| Supply of embedded fanless PC based Maintenance terminal/Datalogger terminal as per RDSO spec. No. RDSO/SPN/192/2019 Ver. 2.0 or latest & RDSO TAN No. - STS/E/TAN/3007 version 1 dated:02.11.12 . The size of VDU shall be minimum 42 inch, LED 4K resolution. Note: One table of suitable size alongwith revolving chair should be supplied with Maintenance terminal (make Godrej/Methodex or similar of reputed make)Inspection by RITES. | — | — | — | 15,57,246.44 | |
| — | 4.00 | — | — | ||
| Installation, wiring, testing and commissioning of embedded fanless PC based Maintenance terminal/Datalogger terminal as per RDSO spec. No. RDSO/SPN/192/2019 Ver. 2.0 or latest & RDSO TAN No. - STS/E/TAN/3007 version 1 dated:02.11.12 supplied vide item 7 of Sch-A | — | — | — | 3,81,731.52 | |
| — | 4.00 | — | — | ||
| Installation, Wiring, Testing & Commissioning of complete Electronic Interlocking system as per RDSO specification No. RDSO/SPN/ 192/2019 ver. 2.0 or latest with Hot Standby arrangement for functioning of EI system, supplied including transportationof required materials from consignee's depot to site, erection and grouting of EI Relay Racks, fixing and wiring of all the interfacing relays (Vital & Non-Vital), installation and wiring of Microprocessor equipments, interface equipments, power supply equipments and all other associated accessories to make complete EI system to be functional, FAT and SAT, Technical Advisory Notes (TAN) issued by RDSO time to time on installation practices of EI are to be complied. | — | — | — | 25,06,870.92 | |
| — | 4.00 | — | — | ||
| Provision of Ring Earth for EI system, consisting of 06(six) number of maintenance free earths, which includes supply of all components of earthing & bonding system like earth electrode, earth enhancement materials, earth pit, equi-potential earth bus bar, connecting cables and tape/strips and other associated accessories in accordance with RDSO Spec. No.RDSO/SPN/197 Ver.1.0 or latest and provision of earth pits to be connected in a ring to achieve less than 01(One) ohm earth resistance for connecting EI equipments, relay racks, panel , power equipments as per RDSO TAN no. STS/E/TAN/3006 dated 02.11.2012. Diagram of ring earth should be supplied to Railway for approval before execution. All related materials as recommended by RDSO in Spec . No.RDSO/SPN/197 Ver. 1.0 or latest, will be supplied by the contractor. Note: If due to site condition (high soil resistivity, larger size of EI room etc.) more than six maintenance free earths are required then the rate of payment for each such extra individual earth shall be done as per the rates of SOR items 13002 and 13003 (Earthing Items SOR). No other payment for any other material/accessory/fixture etc. shall be admissible for such extra maintenence free earths.Inspection by RDSO. | — | — | — | 6,66,851.84 | |
| — | 4.00 | — | — | ||
| Supply of Micro Processor based Data Logger System with 1024 digital inputs and 32 analog inputs with protocol converter as per RDSO Spec. No. IRS (S) 99/2006 (Amnd. 3) or latest. It includes supply of all the items required for complete indoor relay room wiring from data logger to relay rack tag blocks, drawing/extension of power supply upto Data Logger and also supply of 21" PC with A4 size LASER printer. It includes relay room door lock checking arrangement, commercial power supply monitoring arrangement & monitoring of DG sets, ELD, IPS, UFSBI, BI, interlinking and networking of Data logger. Note: Total numbers of relays and other signalling functions/gears required to be wired as per list circulated vide RDSO Letter No. STS/E/Data log ger dtd.12.09.2011 or latest guidelines. (Inspection by RDSO) | — | — | — | 20,60,257.2 | |
| — | 4.00 | — | — | ||
| Installation, testing and commissioning of Micro Processor based Data Logger System with 1024 digital inputs and 32 analog inputs with protocol converter as per RDSO Spec. No. IRS (S) 99/2006 (Amnd. 3) or latest. It includes supply of all the items required for complete indoor relay room wiring from data logger to relay rack tag blocks, drawing/extension of power supply upto Data Logger. It includes relay room door lock checking arrangement, commercial power supply monitoring arrangement & monitoring of DG sets, ELD, IPS, UFSBI, BI, inter linking and networking of Data logger. It also includes installation of leased line MODEM and other interfacing cards, if required for networking of Data Logger. Note: Total numbers of relays and other signalling functions/gears re quired to be wired as per list circulated vide RDSO Letter No. STS/E/Data logger dtd.12.09.2011 or latest guidelines. | — | — | — | 4,17,862.4 | |
| — | 12.00 | — | — | ||
| Supply of Modular Power Supply Arrangement for VDU (42" - 85") and Industrial PC (Embedded PC) with Input and Output Redundancy Arrangement and Hot Pluggable Modules. Consisting of:1. Input O-Ring Diode Module with Potential Free-1 Nocontacts (PFC) for two 110VDC Sources from IPS and Single 110VDC bus.2. Isolated Inverters (Master/Slave) -2 Nos. Input: 110VDC, Output: 120VAC/220VAC 500VA3. Isolated DC-DC Converters-2 Nos. Input:110VDC, Output:24VDC/10A.4.3U SS Rack with back Panel Mother Board/ Front Panel Power Connectors Inverter AutoChange Over Switch and all required over Switch and all required protection circuits.SS Rack Dimension:-1.3U Height for main Rack (132. Smm ± 10%)2.1U height for Mounting (44.4mm ±10%) Make : Gallant or similar.Inspection by RITES. | — | — | — | 21,94,764.6 | |
| — | 12.00 | — | — | ||
| Installation and commissioning of Modular Power Supply Arrangement for VDU (42" - 85") andIndustrial PC (Embedded PC) including necessary wire & accessories. | — | — | — | 2,50,830.24 | |
| — | 4.00 | — | — | ||
| Design, Suppy, installation,wiring and commisioning of housing as per systematic arrangement given by work incharge for both the operating consoles AC cabinet with PC ,VDU display, mouse and keyboard with suitable work space and sitting arrangement for operator as per Drg no. TYP/16/0007. Final layout of the VDU table shall be as per the size of the VDU and should be customised as per ASM room's space. Wooden block counter made of teak wood frame and 3 mm thick waterproof plywood with formica finish on top on all four sides, having two compartments inside and two doors on opposite sides.Inspection will be inspected by the Representative of DY.CSTE/C/PRYJ. | — | — | — | 43,477 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
SAKTESHGARHYARDDOUBLING_V1.pdf
ATTACHMENT
CHUNARYARDESP21.08.2026_V7.pdf
ATTACHMENT
TypicalDiagramforLocationBoxFoundationdrawing_1584.pdf
ATTACHMENT
TechnicalCircular-1-24forDifferentBoardsusedinSingnalling1584.pdf
ATTACHMENT
signalfoundationdrg2584.pdf
ATTACHMENT
JPO UNDERTAKING
ATTACHMENT
TenderFormFirstSheet.pdf
ATTACHMENT
Annexure-VA.pdf
ATTACHMENT
Annex-VIB.pdf
ATTACHMENT
1_TenderDocument-DYCSTE_CORRECTED585_1.pdf
ATTACHMENT
GCC_April-2022_2022_CE-I_CT_GCC-2022_POLICY_27_04_22.pdf
ATTACHMENT
DISCONTINUATIONOFANNEXUREV_RB.pdf
ATTACHMENT
1_AnnexureAcl584.pdf
ATTACHMENT
2_Annex-VIB.pdf
ATTACHMENT
ACS01to11ofGCC2022.pdf
ATTACHMENT
GCCACS-123389822Dated12.08.2026_compressed.pdf
ATTACHMENT
AGORIKHASYARDDOUBLING_V1.pdf
ATTACHMENT
AGORIKHASSIP15-09-2026.pdf
ATTACHMENT
CHURKYARDDOUBLING_V1.pdf
ATTACHMENT
CHURKSIP08-09-2026.pdf
ATTACHMENT
SARSONGRAMYARDDOUBLING.pdf
ATTACHMENT
SARSONGRAMSIP.pdf
ATTACHMENT
VISWANATHPURIYARDDOUBLING_V1.pdf
ATTACHMENT
VISWANATHPURISIP08-09-2026.pdf
ATTACHMENT
2024_05_14ClarificationregardingsubmissionofAnnexure-VofGCC.pdf
ATTACHMENT
JPO-05-2023UndertakingtheworkoflayingundergroundSignallingTelecomcablesandEngineering1584_1.pdf
ATTACHMENT
3_LAST_FY_DECLARATION.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .