Repairing and Renovation Servant & Guards Quarters at State Home Nizampura, Vadodara. (Repairing Plaster Work, Colour, Door & Window & Misc.)

Name of Work :- Repairing and Renovation Servant & Guards Quarters at State Home

Nizampura, Vadodara. (Repairing Plaster Work, Colour, Door & Window & Misc.)

SPECIFICATION INDEX

It. Description of Item Applicable Specification

1 Apply Polymer Modified Cement Mortar upto 25 mm thick As per Separate Sheet

to RCC members in two or more coats, each coat of 10 mm Attached

or less thick with water cement ratio not more than

in the proportion of 1:5:15 (1 part Polyalk EP of M/S

Sunanda Speciallity Coatings Private Ltd of equivalent

approved brand and manufacture : 5 parts of cement :

parts of coarse sand ) by weight including curing etc. or

BASF make "MasterEmaco S-348" or Parex Group

Construction Products Pvt.Ltd.make "Lanko 732" as

required as per manufacturer's specification etc.complete

including chipping off existing loose, damaged, cracked

concrete etc.from RCC members upto 6mm beyond

reinforcement, carefully by chiesel and hammer including

cleaning the surface of the cement concrete and rusted

reinforcement by mechanical wire brush or by any other

established method and finally remove the loose

materials,rust and dirt with air blowing or by water jetting

2 Providing TMT Bar FE 500/500D reinforcement for R.C.C. As per Separate Sheet

work including bending, binding and placing in position Attached

complete upto floor two level

3 Demolition and disposal of unserviceable materials with As per Separate Sheet

all lead and lift.(i) Lime Concrete Attached

4 Dismentling doors, windows, ventilators etc. (wood or As per Separate Sheet

steel) shutters including chowkhats architraves, holdfasts Attached

and other attachment etc. complete and stacking them

within all lead and lift.(i) Not exceeding 3 Sq.M. in area.

5 Dismentling C.I. pipes G.S.W.pipes abd A.C. rain water As per Separate Sheet

pipes with fittings and clamps including stacking the Attached

materials with all lead and lift ( for any dia, of pipe)

6 Dismantling sanitary fittings like wash basin . W.C. pan As per Separate Sheet

Indian and European type, flushing tank etc. including Attached

stacking the materials with all lead and lift.

It. Description of Item Applicable Specification

7 Removing and scraping of old deteriorated plaster of any As per Separate Sheet

thickness fromm wall / R.C.C member including stacking Attached

of serviceable material and disposal of unserviceable from

site of work with all lead and lift

8 Dismentaling tiled of stone floors laid in mortar including As per Separate Sheet

stacking of serviceable materilas and disposal of Attached

unserviceable materials with all lead and lift.

9 Carring out plinth treatment to post construction / As per Separate Sheet

existing structure by spraying chemical solution for Attached

termite control treatment including labour and material

consistment with I.S.I specification. Using Chlordene and

Chiorpurfiles 20 EC. As Per 6131_paret-II Consentration

Weight one percent is recommended i.e one litre 20 EC

chemical emulsion with 19 liter give 1 % concrentration

inclusive of one litre chemical emulsion appication at the

rate of 5 Litre chemical / Sqm of surface is recommended

10 Filling in foundation and plinth with brick bats/chhara in As per Separate Sheet

layers of 20Cm. thickness including watering ramming Attached

and consolidating etc. complete.

11 Providing and laying cement concrete 1:2:4 (1- Cement : 2- As per Separate Sheet

Coarse sand : 4- graded stone aggregates 20 mm nominal Attached

size) and curing complete excluding cost of formwork in

(A) Foundation and Plinth

12 Providing & fixing M.S. grill / M.S. door of required pattern As per Separate Sheet

to wooden frame Bar of windows/ brick masonry with Attached

necessary M.S. angle, M.S. pipe, M.S. flats and other

structural steel at required spacing and frame around

square or round bars with round headed bolts and nuts or

by screws including cutting welding and applying one coat

of primer and two coats of oil with enamel paint

fabrications etc. complete as directed.

13 Providing and Fixing Machine cut, free edges, machine As per Separate Sheet

polished Granite stone slab 18 mm thick (single piece not Attached

more than 150 cm ) for Doors/Windows sill and Jambs,

staircase tread and risers, cladding etc. as per design

including edge polish of all open edges of granite stone

and laid on 20 mm thick cement mortar 1:6 ( 1 cement:6

coarse sand) jointed with grey cement slurry including

rubbing and polishing finishing etc complete.

It. Description of Item Applicable Specification

14 providing & fixing Black granite frame with all open edges As per Separate Sheet

machine cut & machine polished, fixed by zinc coated Attached

hinges with 37mm thick single shutters of factory made &

stamped I.S 2202 part-1(green ply or Equivalent) 35mm

th.solid core,flush door,having 1mm thick decorative

lamination on both side & 10mm thick Teak wood bending

fixded around the door, including S.S fixtures& fastenings

including primer coat of approved quality and two coats of

oil paint etc.complete as per Engineer inc harge

15 Providing and fixing window having extruded aluminum As per Separate Sheet

Colour anodized section frame main outer size 63.50 x Attached

38.10 x 1.95 mm,@ Wt 1.094 Kg / Rmt, horizontal two

track member size 61.85 mm x 31.75 mm x 1.20mm @

wt.of 0.695 Kg/mt, vertical member of size 61.85 mm x

31.75mm x 1.30 mm @ wt.of 0.659 Kg/mt with sliding

shutters of horizontal member size 40mm x 18mm x

1.29mm @ wt.of 0.456Kg/mt, vertical member of size

0.457 Kg/mt with 5 mm thick transparent bronze colour

tinted float glass with powder coated aluminum fittings

and fixtures and transparent silicon sealant glass fixing to

frame as per details etc complete for window.

16 Providing and fixing standared extruded of alluminium As per Separate Sheet

section of size 63mm x 38.10mm x 1.2mm @ Wt. 0.643 Attached

Kg/mt with colour anodized alluminium frame for

ventilation with 5 mm thick frosted glass as details etc

complete for Ventilation

17 Providing & fixing in position colour anodized Aluminium As per Separate Sheet

sectional ventilators with louvers with anodized section Attached

65 x 25 (@ Wt. 0.833 Kg/Rmt) using 3mm thick Bajari

Figured ground glass Adjustable louvers of standard make

fixed in alluminium channel and including anodized

alluminium fixtures and fastenings with coach bolts etc.

complete (colour as directed by Engineer in charge

18 Providing and laying cement concrete 1:2:4 [1-Cement: 2- As per Separate Sheet

Coarse sand: 4-Graded stone aggregate 20MM nominal Attached

size] and curing complete excluding cost of formwork in

foundation and plinth. [B] Independent piers, columns and

pillars upto floor two level.

It. Description of Item Applicable Specification

19 Providing and fixing FRP frame size 100x50 mm and As per Separate Sheet

28mm thick FRP depress panel shutter having extra Attached

reinforcement on sides & edges in Gel coat finish. The core

of the shutter & frame is to be filed up with injected fire

retardant grade polyurethene foam done in situ alongwith

embedded wooden pieces for stiffening & also taking

hinges & fintures. The whole FRP frame & shutter is to be

water proof weather proof, termite proof & resistance to

mild acid/alkali. Rates are to be inclusive of S.S hinges

with necessary screws & alluminium fixtures & fastenings

& fastener sleeve.

20 P & L 60x60 cm' anti skid doluble salt/Pvt full body As per Separate Sheet

vitrified 8 mm thick tile flooring over 20 mm Attached

(average)base of cement mortar 1:6 (1cement : 6 coarse

sand)on new surface or fixing on existing flooring by

adhesive materials including dismentalig of existing

flooring and jointed with colour cement slurry including

finished with flush pointing & cleaning the surface etc.

complete for antiskit Grouting the joints of flooring tiles

having joints of 3 mm width, using epoxy grout mix of

kg of organic coated filler of desired shade (0.10 kg of

hardener and 0.20 kg of resin per kg), including filling /

grouting and finishing complete as per direction of

Engineer-in-charge.

21 Providing and laying anti skid MATT Finished coloured As per Separate Sheet

Ceramic tiles 30 x 30 cm size 6 mm to 8 mm thick in Attached

flooring treads of steps and landing laid on a bed of 12 mm

thick cement mortar 1:3(1-cement:3-coarse

sand)finishing with flush pointing in white cement etc.

complete. Colour and Shade approved by Engineer-In-

22 Providing and laying Colour glazed tiles size 30 x 45 cm or As per Separate Sheet

30cm x 60cm 6 mm to 8mm. thick in skirting risers of Attached

steps and dedo on 10 mm thick cement plaster 1:3 (1-

cement:3coarse sand) and jointed with colour cement

slurry suggested by architect and approved by engineer in

It. Description of Item Applicable Specification

23 Providing and fixing 0.45m high Stainless steel hand As per Separate Sheet

railing having horizontal 1 row of 50 mm dia 304 grade Attached

(16 Gauge) stainless steel railing pipe as hand rail and

with vertical supports 50mm dia. hollow stainless steel

pipes at 0.9mt c/c distance and intermediate members

running through stainless steel 50 mm dia 304 grade (16

Gauge) hollow pipe having threaded screw/ welded and at

end including cutting, bending, welding, S.S. Dome Type

Cap & fabrication the structure as per drawing including

finishing etc. complete as per NBC guidline or instruction

of Engineer Incharge.

24 Providing 15mm thick cement plaster in single coat on As per Separate Sheet

Rough (Similar)side of single or half brick walls for Attached

interior plastering upto floor two level and finished even

and smooth in (ii) Cement mortar 1:4 (1-cement :4-sand)

including finishing with a floating coat of neat cement

25 20mm thick sand faced cement plaster on walls upto As per Separate Sheet

height 10 metres above ground level consisting of 12mm Attached

thick backing coat of C.M. 1:3 (1-cement : 3-sand) and

8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand)

26 Wall painting (two coats) with plastic emulsion paint of As per Separate Sheet

approved brand and manufacture on undecorated wall Attached

surface to give an even shade including throughly

brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth and

including applying two coats of Birla (white cement

based) or Asian (acrylic lapy- putty) or equivalent & two

coats of primer of approved brand and manufacture after

thoroughly brushing the surface and other foreign matter

and also including preparing the surface even and sand

parpered smooth.

27 Finishing wall with weather proof exterior emulsion paint As per Separate Sheet

on wall surface (two coats) to give an required shape even Attached

shade after thoroughly brushing the surface to remove all

dirt, and remains of loose powdered materials.etc

It. Description of Item Applicable Specification

28 Providing laying and jointing in true line and level 15mm As per Separate Sheet

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including Attached

fittings make PRINCE / SUPREME / ASTRAL / FINOLEX

or equivalent as approved by Engineer In Charge. Pipe

shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concelled as directed including

necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost

of all materials.

29 Providing laying and jointing in true line and level 25mm As per Separate Sheet

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including Attached

fittings make PRINCE / SUPREME / ASTRAL / FINOLEX

or equivalent as approved by Engineer In Charge. Pipe

shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concelled as directed including

necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost

of all materials.

30 Providing laying and jointing in true line and level 40mm As per Separate Sheet

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including Attached

fittings make PRINCE / SUPREME / ASTRAL / FINOLEX

or equivalent as approved by Engineer In Charge. Pipe

shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concelled as directed including

necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost

of all materials.

31 Providing laying and jointing in true line and level UPVC As per Separate Sheet

SWR pipe Type B pipe confirming to IS 13592 -1992 with Attached

one end plain and other end socketed with rubbering &

fitting confirming to ISI 14735-1999 of approved make for

drainage system pipe line,pipe shall be jointed with each

other with rubber lubricant,pipe shall be fixed on wall

using of PVC clamp of the size 160mm diameter x 210mm

lenght x 196mm high at every 2000mm center to center or

shall be concealed in wall as directed including necessary

fitting such as bends,shoes etc. including testing of pipe

and joints and jointed with adhesive solvent cement

including cost of all materials.75 mm Dia

It. Description of Item Applicable Specification

32 Providing and fixing wash down water closet (European As per Separate Sheet

type, W.C. Pan) with integral P or S trap including jointing Attached

the trap with soil pipe in Cement Mortar 1:1 (1-Cement : 1-

fine sand) including white plastic seat and cover with C.P.

brass hinges and rubber buffers.

33 Providing and fixing washbasin with single hole for pillar As per Separate Sheet

tap with C.I. or M.S. brackets painted white including Attached

sutting holes and making good the same, including fittings

like Providing and fixing 32 mm dia C.P. brass waste for

washbasin, Providing and fixing pillar tap, capstan head,

screw down high pressure with screws, shanks and back

nuts. (i) 15mm dia. (A) Vitreous China:(ii) Flat Back

washbasin 550 mm x v 400mm size. (i) In white colour.

34 Providing and fixing PVC SWR Nahni trap IS 14735 for As per Separate Sheet

drain - 100 mm diameter with jali of the following Attached

nominal diameter of self cleansing design with C.I scread

down or hinged grating including the cost of cutting and

making good the walls.

35 Providing and fixing chromium plated brass half trun flush As per Separate Sheet

cock of approved quality including fixing in pipe line etc. Attached

complete. (ii) 25mm dia.

36 Providing and fixing screw down bib taps of following As per Separate Sheet

size.(B) Brass chromium plated screws down Bib Tap. (i) Attached

37 Providing and fixing brass screw down stop tap.(A) 15mm As per Separate Sheet

38 Providing and fixing Gun metal check or non-return As per Separate Sheet

fullway wheel valve.(C) 25mm dia. Attached

39 Providing and fixing Gun metal check or non-return As per Separate Sheet

fullway wheel valve.(E) 40mm dia. Attached

It. Description of Item Applicable Specification

40 Constructing brick masonry chamber for underground C.I. As per Separate Sheet

Inspection chamber and bends with bricks having Attached

crushing strength not less than 35Kg/Cm2 in C.M. 1:5 C.I.

cover with frame (Light duty) 455mm x 610mm intenal

dimensions total weight of cover with frame to be not less

than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. )

(R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand

:4-graded stone aggregate 20mm size) foundation

concrete 1:5:10 inside plaster 15mm thick with cement

mortar 1:3 finished smooth with a floating coat of neat

cement on walls and bed concrete etc. complete.(i) Inside

dimensions 455mmx 610mm and 450mm deep for single

41 Providing erecting and fixing double coated Syntex PVC. As per Separate Sheet

(ISI) water tank of required capacity each with all Attached

necessary fittings and connection etc. complete on terrace.

42 Steel work, riveted in built up sections framed work As per Separate Sheet

including cutting, hoisting, fixing in position and applying Attached

a priming coat of read lead paint. (A) In beams and joists,

channels angles Tees, flats, with connecting plates or

angle cleats as in main and cross beams. Hip and jack

rafters, purlins conneted to common rafters and the like.

43 Providing PPGI 0.60mm Thick Trafford sheet roofing. The As per Separate Sheet

precoated sheet shall be of minimumu 240mpa sheet Attached

grade confirming to IS14246:1995 and shall have

zinccoating of 120gsmas per IS-277,5-7microns epoxy

primer on Both side of the sheet and polyester top coat 15-

18 micron.The PPGI sheet shall have protective guard film

of minimum 25 microns to avoid scratcheswhile

transportation. the roof panels are laid over aframe work

of trusses ,column and purlins fixed using 90mmself

driling bolt with rubber washer including all types of

flashings,inclduing corner angle end cap labour and

materials etc complete excluding the cost of

purlins,Rafters and Trusses.

It. Description of Item Applicable Specification

44 Providing and laying water proofing tretment with chaina As per Separate Sheet

mosaic tiles flooring over avg 40 mm C.C. 1:2:4 {1 Cement : Attached

2 sand : 4 Kapachi / Gritt 6 to 12 mm size} bedding for

maintaining slope for plain and curve surface & 12 mm to

20 mm of broken piece of seramic / glazed tiles ( one for

more color as directed ) to be laid over cement mortar

bedding of C M 1:3 (1 cement : 3 sand ) containg one Kg of

water profing materials per bag of O P C at plain or / and

slops and to be tempered to bring mortar eramic up to

surface with using white cement and colour pigment

including rounding of junctions and extending them up to

15 cm along the wall and curing with bends any pattens or

design as per drawing and cleaning by using oxalic acid

Signature of Contractor

Deputy Executive Engineer Executive Engineer

City (R&B) Sub Division City (R&B) Division

Vadodara Vadodara