Construction of Ayurvedic Health Center building at Rakhoh in Tehsil Sarkaghat Distt. Mandi (HP)

Amount

Cutting In earth work in all kinds of soil such saturated soil pick work, jumper work, hard soft blasting work including chiselling/wedging out of rock etc, any other mixed classification of soil in all heights and depths including clearance of Jungles and uprooting of trees and bushes etc. stacking the serviceable materials in specified stacks and disposing of all surplus excavated earth with in all leads and lefts disposed earth to be neatly levelled and dressed complete as per the direction of Engineer-in-Charge.

Excavation in foundations, trenches etcetera in all classification of soil dry in or saturated conditions upto any depth and lift includung pumping and bailing out water where required including stacking the serviceable and unserviceable materials seperately as directed and then returning the stacked soil in fifteen centimeters layers when required into plinth and sides of foundation etcectra consolidating each deposited layer by ramming and watering and then disposing of all surplus un-serviceable excavated earth within all leads and lifts as directed by the Engineer-in- Charge including carriage of materials in all leads and lifts disposed materials to be neatly levelled.

Providing from work with mild steel plates 3.15mm (Three point one five millimeter) thick welded with angle iron in frames 30x30x5mm(Thirty into thirty into five millimeter ) so as to give a fair finish including centering, shuttering, strutting , propping and centring with wooden battens and ballies in all heights below supporting floor to celling and removal of the same for insitu-reinforced concrete and plain concrete work, including entire carriage of materials in all leads and lifts as per the direction of Engineer-in-Charge .

Flat surfaces such as soffits of the suspended floors roofs, landing,shelves and the like etcetra in all thickness in any floor level.

Beams, cantilever, girder and lintel, sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels in any depth in all heights from floor.

Vertical surfaces such as walls and thickness partitions and the like including attached pillasters, buttresses, plinth and string courses and the like.

Providing and laying cement concrete 1:6:12 (One cement :six sand: twelve graded crushed stone aggregate) 40mm(Forty millimeters) nominal size ,mixed and vibrated mechanically and curing complete excluding cost of form work in foundation and plinth including entire carriage of materials in all leads and lifts as per direction of Engineer-in-Charge.

Random rubble masonry/polygonal rubble masonry (un-coursed/brought to courses) with hard stone of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (one cement: six sand : twelve graded/crushed stone aggregate 20mm (twenty millimetre) nominal size at plinth level in cement mortar 1:6 (one cement : six sand) and curing complete including carriage of materials within all leads and lifts and other incidentals.

Boulder filling dry hand packed tightly as in rooms etc. including carriage of materials within all leads and lifts and other incidentals.

Squared rubble masonry coursed with hard stone of approved quality in foundation and plinth including raking out joints in cement mortar 1:6 (one cement : Six sand) including carriage of materials within all leads, lifts and other incidentials .

Providing and laying cement concrete 1:5:10 (One cement: five sand: ten graded crushed stone aggregate) 40mm (Forty millimeters) nominal size and curing complete excluding cost of form work in foundation and plinth including entire carriage of materials in all leads and lifts as per the direction of Engineer-in-Charge.

Providing and laying cement concrete 1:2:4 (one cement: two sand: four graded crushed stone aggregate) 20mm (Twenty milimetre) nominal size crushed stone aggregate mechanically mixed and vibrated and curing complete excluding cost of form work and reinforcement for reinforced cement concrete work including carriage of materials with in all leads and lifts and other incidentals.

Suspened floors, roofs, landings, shelves and there support balconies, beams, girders, bressumers and cantilevers upto all floor level

Wall any thicknessbut not less than 0.10 ( zero point ten ) metre thickness including attached pilasters, buttress, plinth nad string courses etc. from top and foundation upto all floor level

Providing weep holes in brick masonry / Stone masonry / plain/reinforced concrete in retaining walls, breast walls and the like with 110mm ( One hundred ten) dia PVC (Polyvinyl Chloride) pipe extending through the full width of the structure with slope of 1 vertical : 20 horizontal towards drawing face complete as per drawing and technical specification clauses 614,709,1204.3.7 in all leads and lifts and carriage of material by all modes of transportation as per the direction of Engineer- in-Chrage.

Providing and laying upto all floor level cement concrete 1:2:4 (one cement : two Sand : four graded stone aggregate 20mm (twenty milimetre) nominal size) and curing complete including form work in mouldings as in cornices, window sills etc. not exceeding 15cm (fifteen centimetre) including entire carriage of materials in all leads and lifts as per the direction of Engineer-in-Charge.

Providing and laying cement concrete 1:1.5.:3 (One cement :one point five sand :three graded stone aggregate 20mm (twenty millimetre) nominal size and curing complete excluding cost of form work and reinforcement for reinforced concrete work in Suspened floors, roofs, landings, shelves and there support balconies, beams, girders, bressumers and cantilevers upto all floor level including carriage of materials with in all leads and lifts and other incidentals.

Providing and laying tor steel reinforcement for reinforced cement concrete work including bending , binding and placing in position complete in all heights including cost of binding wire and including entire carriage of materials in all leads and lifts as per the direction of Engineer-in-Charge.

Brick work using second class common burnt clay building bricks in super structure above plinth level upto all floor level in cement mortar 1:6 (one cement : six sand) upto all floor level including curing complete and carriage of material within all leads, lifts and other incidentals.

Half brick masonry using second class common burnt clay building bricks in super structure in cement mortar 1:4 (one cement : four sand) upto all floor level including curing complete and carriage of material within all leads, lifts and other incidentals.

Providing wood work in frames of doors windowes clerestory window and other frames wrought framed and fixed in position 2nd (second) class deodar wood including curing complete and carriage of materials within all leads and lifts and other incidentals .

Providing and fixing 40mm (forty milimeters) thick second class deodar wood panelled glazed or panelled and glazed shutters for doors windows and clerestory windows including black enamelled iron butt hinges with necessary screw complete including entire carriage of materials in all leads and lifts as per the direction of Engineer- in- charge.

Providing and fixing 19mm (nineteen millimeters) thick commercial board water proof shutter for cup board including fixing with nickel plated piano hinges with screws etcectra complete including entire carriage of materials in all leads,lifts and heights as per the direction of the Engineer -in- charge.

Providing and fixing 19mm (nineteen millimetre) thick water proof commercial board in shelves / box for cup board with butt joints & fixing with nails & screws etc.including entire carriage of materials in all leads and lifts as per the direction of Engineer- in-Charge.

Providing and fixing 6 mm (six millimetre) thick commercial ply wood ceiling of approved quality with butt jointing and nails (frame work and cover fillets to be paid for separately) including entire carriage of materials in all leads,lifts and heights as per the direction of the Engineer -in- charge.

Providing and fixing 1.00mm (one point zero) thick coloured or plain lamination sheet (sunmica) on boards / ply wood sheets with approved adhesive and nails etc complete including entire carriage of materials in all leads,lifts and heights as per the direction of the Engineer -in- charge.

Providing and fixing square edges cover fillets (beading) 19 mm x 6 mm (nineteen millimetre into six millimetre) section including mitring at junctions with wood screws and nails complete including entire carriage of materials in all leads,lifts and heights as per the direction of the Engineer -in- charge.

Providing and fixing 100mm (one hundred millimetre) size bright finished brass handles with screws etc. complete including carriage of material within all leads and lifts and other incidentals.

Providing and fixing 300x16mm ( three hundred into sixteen millimetre) size anodized aluminium sliding door bolts anodized colour and shade with bolts and nuts screws etc. complete including carriage of material within all leads and lifts and other incidentials.

Providing and fixing aluminium tower bolts (barrel type) anodized transparent or dyed to required shade and colour with screws etc. complete including carriage of material within all leads, lifts and other incidentals.

250 x10mm ( two hundred fifty into ten milimetre ) size

150 x10mm ( one hundred fifty into ten milimetre ) size

Providing and fixing aluminium handles anodized transparent or dyed to required colour of shade with necessary screws etc. complete including carriage of material within all leads and lifts and other incidentals.

125mm (one hundred twenty five millimetre) size

100mm (one hundred millimetre) size

Providing and fixing 100mm (one hundred milimetre ) bright finished brass floor door stopper with rubber cushion screws etc. to suit shutter thickness complete including carriage of materials within all leads and lifts and other incidentals charges.

Providing and fixing 150 mm (one hundred fifty millimetre) size bright finished hard drawn hooks and eyes including carriage of materials within all leads and lifts and other incidentals charges.

Providing and fixing bright finished or / and black enamelled iron (Helical door spring 150mm (one hundred fifty millimetre) including carriage of materials within all leads and lifts and other incidentals charges.

Providing and fixing 10mm (ten millimetre) thick anti skid water proof stain and impect resistent heavy duty vetrified tiles Nitco or equivalant 600 mm x 600 mm x10 mm (six hundred millimetre into six hundred millimetre into ten millimetre) manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm (twelve millimetre) thick cement mortar 1:3 (one cement : three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete including carriage of materials within all leads and lifts and other incidentals charges.

40 mm (forty milimetre) thick marble chips flooring rubbed and polished to granolithic finish under layer 34 mm (thirty four milimetre) thick cement concrete 1:2:4 (one cement : two sand : four graded stone aggregate 10 mm (ten milimetre) and down guage and top layer 6 mm (six milimetre) thick marble chips of required sizes laid in cement marble powder mix 3:1 ( three cement : one marble powder by weight) in proportion of 4:7 (four cement marble powder mix : seven marble chips by volume) Medium shade pigment with approximately 50% (fifty percent) white cement and 50% (fifty percent) and ordinary cement (in top layer only) including carriage of materials within all leads and lifts and other incidentals charges.

40mm (forty millimeters ) thick cement concrete flooring 1:2:4 (one cement:two sand :four graded crushed stone aggregate ) 20mm (twenty millimeters) nominal size laid in one layer finshed with a floating coat of neat cement, curing complete including entire carriage of materials in all leads and lifts as per the direction of Engineer-in Charge.

Providing and laying red sand stone slab flooring 40mm (forty milimetre) average thick on 20mm (twenty milimetre) average thick base of cement mortar 1:4 (one cement : four sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and granite polish finish complete including carriage of materials within all leads and lifts and other incidentals charges.

Providing and laying marble work (Table rubbed and polished) in flooring on 20mm (twenty milimetre) thick base in cement mortar 1:3 (one cement: three sand) including jointing with cement mortar 1:2 (one white cement : two marble dust) with an admixure of pigment to match the shade of the marble 20 mm (twenty milimetre) thick white makrana marble including carriage of materials within all leads and lifts and other incidentals charges.

15mm (fifteen millimeters) thick cement plaster in single coat on rough side of brick concrete/stone walls for interior plastering upto all floor level including arrises internal rounded angles, chamfers and / or rounded angles not exceeding 80mm (Eighty millimeters) in girth and finished even and smooth in cement mortar 1:6 ( One cement : six sand) and curing complete including entire carriage of material in all leads and lifts as per of the direction Engineer- in- Charge.

15mm (fifteen millimeters) thick cement plaster in single coat on fair side of brick concrete/ stone walls for interior plastering upto all floor level including arrises internal rounded angles, chamfers and / or rounded angles not exceeding 80mm (eighty millimeters) in girth and finished even and smooth in cement mortar 1:6 ( One cement : six sand) and curing complete including entire carriage of material in all leads and lifts as per of the direction Engineer- in- Charge.

6mm (six millimetre) cement plaster to ceiling with cement mortar 1:3 (one cement : three sand) in all floor level including carriage of material within all leads, lifts and other incidentals.

Providing and fixing 0.60mm (zero point sixty milimetre) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified poliyster (RNP) organic coating of 20 (twenty) microns over 5 (five) microns primer coating to black coat of polyster of 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six milimetre) with prepainted G.I limpet and bitumen washers complete with all accesories as required as per direction of Engineer-in-charge with in all leads and lifts and other incidentals.

Providing and fixing mild steel BP sheet 1.66mm to 2mm (one point six six millimetre to two millimetre) thick in eaves board, facia, soffits, ceiling including cutting, fixing and welding to to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured and paid for separately) including carriage of material within all leads, lifts and other incidentals.

Providing and fixing 0.63mm(Zero point sixty three millimeter) thick G.I. sheet 15cm (Fifteen centimeter) wide 45cm(Forty five centimeters) over all semicircular plain G.I Sheet gutter with iron brackets 40x3 mm (Forty into three millimeter) size bolts and nuts and washers etc. including making necessary connection with rain water pipe complete including entire carriage of materials in all leads and lifts as per the direction of Engineer-in-Charge.

Providing and fixing ridges or hips overall 60 cm (sixty centimetre with 0.60mm (zero decimal six zero millimetre ) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 (twenty) micron over 5 (five) micron primer coating to black coat of polyster of 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimetre) diametre with prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction and entire satisfaction of the Engineer-in-charge with in all leads and lifts and other incidentals.

Providing and fixing valley overall 60 cm (sixty centimetre ) with 0.60mm (zero decimal six zero millimetre ) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimetre) diametre with prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction and entire satisfaction of the Engineer-in-charge with in all leads and lifts and other incidentals.

Providing and fixing flushing 38cm (thirty eight centimetre) overall with 0.60mm (zero decimal six zero millimetre ) thick prepainted sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 (twenty) microns over 5 (five) microns primer coating + back coat of polyster of 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six milimetre) dia meter and prepainted G.I. limpet & bitumen washers complete with all accessories as required as per the direction and entire satisfaction of the Engineer-in-charge with in all leads and lifts and other incidentals.

Steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of red lead paint In beams joists channels, angles, tee, flats with connection plates or angle cleats as in main and cross beems, hip and jack rafters, purlins connected to common rafters and the like including entire carriage of materials in all leads and lifts as per the direction of Engineer-in-Charge.

Steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of red lead paint In gratings framed guard bars, ladders, railing, brackets and similar works including entire carriage of materials in all leads and lifts as per the direction of Engineer-in-Charge.

Providing and fixing moulded hand rail of mild steel hollow pipe 50mm (fifty millimeters) dia welded in straight lenght over mild steel flat at top of vertical balusters including one coat of red oxide priming coat complete (mild steel flat & balusters of railings shall be mesaured & paid separtely including entire carriage of materials in all leads and lifts as per the direction of Engineer-in- Charge.

Providing and fixing 100mm ( one hundred milimetre) dia pipes on wall face PVC (D-Plast) rain water pipes of working pressure not less than 4.5 kg/sq. mtr. ( four point five kilogramme per square metre ) including filling the joints with approved adhesive complete including carriage of material within all leads, lifts and other incidentals.

Providing and fixing PVC plain bend 100mm ( one hundred milimetre) dia on wall faces PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesive complete including carriage of material within all leads, lifts and other incidentals.

Providing and fixing 100mm (One hundred millimeter) diameter for cast iron mild steel holder bat clamps of approved design to cast iron or sand cast iron pipe PVC pipe embedded in end including cement concrete block 10X10X10cm (Ten into ten into ten centimeter) of 1:2:4 (One cement : two sand : four graded crushed stone aggregrate )20mm (Twenty millimeter) nominal size and cost of cutting holes and making good the walls etc. including entire carriage carriage of material in all leads and lifts as per the direction of Engineer-in-Charge.

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matt finish to the surface complete including carriage of material within all leads, lifts and other incidentals.

Wall painting (two coats) with acrylic emulsion paint of approved brand and manufacture for interior grade on undecorated concrete/stone/plastered wall surfaces to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required for metling the surface including entire carriage carriage of material in all leads and lifts as per the direction of Engineer-in-Charge.

Painting two coats (excluding priming on new concrete masonry / plaster surfaces with readymixed paint brushing for use on floors to give an even shade including cleaning the surface of all dirt,dust and other foreign matter and sand papering as required with paint other than white including entire carriage carriage of material in all leads and lifts as per the direction of Engineer-in-Charge.

Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equivalent on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete including entire carriage carriage of material in all leads and lifts as per the direction of Engineer-in-Charge.

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter, sand papering and knotting with ready mixed paint brushing wood primer pink including carriage of material within all leads, lifts and other incidentals.

Painting two coats (excluding priming coat) on new wood and wood based surfaces, with enamel paint to give an even shade including cleaning the surface of all dirt, dust and other foreign matter, sand papering and stopping with enamel paint other than white including carriage of material within all leads and lifts and other incidentals.

Constructing course rubble hammer dressed U-Shape open surface drain with side wall 15x22cm (fifteen into twenty two centimetre) in cement mortar 1:6 (one cement : six sand) and inside plastering with cement plaster 1:3 (one cement : three sand) including earth work and laying 10cm (ten centimetre) thick cement concrete 1:5:10 (one cement : five sand : ten graded crushed stone aggregate 40mm (forty millimetre) nominal size) and 7.5cm (seven point five centimetre) cement concrete 1:2:4 (one cement : two sand : four graded crushed stone aggregate twenty millimetre) nominal size) and finished with a floating coat of neat cement complete as per standard drawing/design including carriage of material within all leads, lifts and other incidentals.

Provding under layer for plinth protection of 75mm (Seventy five millimeters) thick (unconsolidated) bed dry brick/aggregate 40mm(Forty millimeters) nominal size well rammed and consolidated and grouted with fine sand including preparation of ground complete including entire carriage of materials in all leads and lifts as per the diretion of Engineer- in-Charge.

Provding plinth protection 50mm (Fifty millimeters) thick in cement concrete 1:3:6 (One cement:three sand:Six graded/crushed stone aggregate)20mm(Twenty millimeters) nominal size including finishing the top surface complete including entire carriage of materials in all leads and lifts as per the diretion of Engineer- in-Charge.

WATER SUPPLY AND SAINTARY INSTALLATION Providing and fixing to wall, ceiling and floor galvanized mild steel tubes (medium grade) tube fitting and clamps including making good the walls, ceiling and floor complete in all respect including carriage of materials within all leads and lifts and other incidentials.

15mm (fifteen millimeter nominal size)

20mm ( twenty millimeter nominal size)

Providing and fixing Polyethelene-Aluminium-Polyethelene (PE-AL-PE) composite pressure pipe U.V. stablized with carbon black confirming to IS-15450-2004 water supply including clamp at one metre spacing, cutting, fixing and making good the wall etc. but excluding the cost of fittings (internal work) pipes exposed on wall 1620 mm (20 mm (twenty milimetre) OD pipe including carriage of materials within all leads and lifts and other incidentials.

Providing and fixing PE-AL-PE- composite end seal compression fittings as per IS-15450-2004 for cold water supply e.g. tees, elbows, reducers, connectors, couplers and clamps with jointing testing and fittings complete including cutting and making good the walls etc. including carriage of materials within all leads and lifts and other incidentials.

Equal Tees.1620 (one thousand six hundred twenty)

Female branch Tees.1620x1620x20mm (one thousand six hundred twenty into one thousand six hundred twenty into twenty milimetre) thread

Female elbows 1620 x 20 mm (one thousand six hundred twenty into twenty milimetre) thread.

Male thread connector 1620x20mm (one thousand six hundred twenty into twenty milimetre) thread.

Female thread connector 1620x20mm (one thousand six hundred twenty into twenty milimetre) thread.

Couplers 1620 (one thousand six hundred twenty)

Making connection of galvanised steel distribution branch with galvanised mild steel main 20mm to 40mm ( Twenty milimetres to Forty milimetres ) nominal bore by providing and fixing tee including cutting and threading the pipe complete including carriage of materials within all leads and lifts .

Providing and fixing 1000 (one thousand litre) net capacity PVC water storage tank of ISI 12701 marked, galvanised iron inlet and outlet connection,15mm (fifteen milimetre) nominal bore ball valve and mosquito proof PVC coverwith locking arrangement including hoisting upto all heights above ground level including all leads, lifts and carriage of materials as per entire satisfaction of Engineer-in-charge.

Providing and fixing vitreous China wash down,water closet (European type. W.C. pan) with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1 (one cement : one sand) (Seat and cover to be measured and paid for separately) Ordinary closet including entire carriage of materials in all leads and lifts as per the diretion of Engineer- in-Charge.

Providing and fixing Solid type white plastic seat and cover for wash down water closet with C.P. brass hinges and rubber buffers including carriage of materials within all leads and lifts and other incidentials.

Providing and fixing vitreous China wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings Flat back 550mm x 400mm ( five hundred fifty into four hundred milimetre ) including entire carriage of materials in all leads and lifts as per the diretion of Engineer- in-Charge.

Providing and fixing vitreous China padedstal for wash basin complete recessed at the back for the reception of pipes and fittings including entire carriage of materials in all leads and lifts as per the diretion of Engineer- in-Charge.

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts and other incidentials.

110mm ( one hundred ten milimetre ) dia.

75mm ( seventy five milimetre ) dia

Providing and fixing PVC single equal branch with oval access door, ISI marked insertion rubber washer 3 mm ( three milimetre ) thick bolts and nuts complete including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts and other incidentials.

110mm ( one hundred ten milimetre ) dia.

75mm ( seventy five milimetre ) dia

Providing and fixing PVC door bend with oval access door, insertion rubber washer 3 mm (three milimetre) thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts and other incidentials.

110mm ( one hundred ten milimetre ) dia.

75mm ( seventy five milimetre ) dia

Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts and other incidentials.

110mm ( one hundred ten milimetre ) dia.

75mm ( seventy five milimetre ) dia

Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts and other incidentials.

110mm ( one hundred ten milimetre ) dia.

75mm ( seventy five milimetre ) dia

Providing and fixing 110mm x 75mm ( one hundred ten milimetre into seventy five milimetre ) PVC floor trap ISI marked self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floor etc. complete including carriage of materials within all leads and lifts and other incidentials.

Providing and fixing PTMT Coloured / white high density polythelene / poly propylene 10 ( ten ) litres capacity ( full flush) European standard control low level flushing cistern with fittings with a pair of brackets with fittings such as lead valve, syphon, 15mm ( fifteen milimtre ) nominal size PVC ball valve with polythene float,with push button,couplings for connections with inlet, outlet and over flow pipe, 40mm ( forty milimetre ) dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (over flow pipe to be measured and paid for separately) including entire carriage of materials in all leads and lifts as per the diretion of Engineer- in-Charge.

Providing and fixing 600x450mm (Six hundred into four hundred fifty millimeters) beveled edge mirror of superior glass mounted on 6mm(Six millimeters) thick A.C. sheet or plywood sheet and fixed to wooden plug Choromium plated brass and washers complete including carriage of materials within all leads and lifts and other incidentials.

Providing and fixing CP brass towel rail complete with CP brass bracket fixed to wooden plugs with CP brass 600x 20mm ( six hundred into twenty milimetre) including carriage of materials within all leads and lifts and other incidentials.

Providing and fixing 600mm X 120mm ( six hundred milimetre into one hundred twenty milimetre ) glass shelf with choromium plated brass bracket and guard rail complete fixed to wooden plug with CP brass screws including carriage of materials within all leads and lifts and other incidentials.

Providing and fixing wall mixing faucet for shower and bath with overhead pipe (1210cm) and bath shower including carriage of materials within all leads and lifts and other incidentials.

Providing and fixing one hole basin mixing Faucet including carriage of materials within all leads and lifts and other incidentials.

Providing and fixing 15mm (fifteen milimetre) mixer for kitchen sink with top / bottom swinging spout including carriage of materials within all leads and lifts and other incidentials.

Providing and fixing 15mm (fifteen milimetre) dia C.P brass bib tap with capstan head including carriage of materials within all leads and lifts and other incidentials.

Providing and fixing CP Brass pillar tap with capastan head 15mm ( fifteen milimetre) dia including carriage of materials within all leads and lifts and other incidentials.

Providing and fixing 15mm (fifteen milimetre ) nominal bore brass full way valve with wheel including carriage of materials within all leads and lifts and other incidentials.

Providing and fixing 32mm (thirty two milimetre) dia chromium plated brass waste for wash basin or sink including carriage of materials within all leads and lifts and other incidentials.

Providing and fixing PTMT jet spray of approved quality and colour with 1.0 mtr. ( one point zero metre ) tube including carriage of materials within all leads and lifts and other incidentials.

Providing and fixing PVC connections pipe with brass unions 300/450mm (three hundred obluique four hundered fifty milimetre) lenght 15mm ( Fifteen milimetres ) nominal bore complete upto all floor level including carriage of materials within all leads and lifts and other incidentials.

Providing and fixing Choromium plated brass soap dish with Choromium plated brass brakckets fixed to wooden cleats with Choromium plated brass screws including carriage of materials within all leads and lifts and other incidentials.

Providing and fixing 15mm (fifteen milimetre) nominal size G.I. / M.I Union (where not included in the items) including carriage of materials within all leads and lifts and other incidentials.

Ashit Thakur