SR to Repairing/Renovation of Store Building at MITANA ( By providing Toilet Renovation, Plaster, color, Door-Window, Compound Wall etc.)

Name of Work :-SR to Repairing/Renovation of Store Building at MITANA ( By providing Toilet Renovation, Plaster, color, Door-Window,

Compound Wall etc.)

=// Bill of Quantities //-

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Figure Rs. In Words Accourding to

1 6.00 Dismantling santtary fittings like wash basin . W.C. pan Indian and European type, flushing No 414.23 Rupees Four Hundred Estimated

tank etc. including stacking the materials with all lead and lift. Fourteen Paise Twenty

2 11.00 Demolition including stacking of serviceable materilas and disposal of unserviceable Cum 1082.35 Rupees One Thousand

materials with all lead and lift. (i) R.C.C. work Eighty Two Paise Thirty

3 951.00 Removing and scraping of old deteriorated plaster of any thickness fromm wall / R.C.C SqM 19.89 Rupees Nineteen Paise

member including stacking of serviceable material and disposal of unserviceable from site Eighty Nine Only

of work with all lead and lift.

4 1194.00 Removing dry or oil bound distemper by a washing and scraping and sand papering the wall SqM 11.53 Rupees Eleven Paise Fifty

surface smooth including necessary repairs to scratches complete. Three Only

5 42.00 Dismentalings manglore of country tile roofing with battens boarding etc. including stacking Sqm 89.53 Rupees Eighty Nine Paise

of serviceable materilas and disposal of unserviceable materials with all lead and lift.(ii) Fifty Three Only

A.C. sheet roofing.

6 4.00 Dismentling doors, windows, ventilators etc. (wood or steel) shutters including chowkhats Each 192.09 Rupees One Hundred

architraves, holdfasts and other attachment etc. complete and stacking them within all lead Ninety Two Paise Nine Only

and lift.(i) Not exceeding 3 Sq.M. in area.

7 28.00 Providing and laying ordinary cement concrete 1:2:4 (1- Cement 2- coarse sand : 4- graded Cum 10218.98 Rupees Ten Thousand Two

stone aggregates 20 mm nominal size) for R.C.C lintel including finishing smooth Hundred Eighteen Paise

with,curing etc. complete including the cost of formwork but excluding the cost of Ninety Eight Only

8 2240.00 Providing TMT Bar FE 500/500D reinforcement for R.C.C. work including bending, Kg 77.29 Rupees Seventy Seven

binding and placing in position complete upto floor two level for Ground Floor Paise Twenty Nine Only

9 1213.00 Providing and fixing M.S. grills of required pattern to frames of windows etc. with M.S. KG 109.24 Rupees One Hundred Nine

flats at required spacings and frame alround, square or round bars with round headed bolts Paise Twenty Four Only

and nuts or by screws (A) Plain Grill.

10 42.00 Applying general insecticide pest control treatment to floors, cupboards etc including labour SqM 91.63 Rupees Ninety One Paise

material etc. complete. Using Heptachloride 20 EC. As Per 6113_pests Consentration Sixty Three Only

Weight 0.50 percent is recommended one litre chemical emulsion dillute with 39 liter of

water will give. Total dillute concrentration will be 40 litre inclusive of one litre chemical

emulsion appication 0.5 Litre chemical / Sqm of surface is recommended as per I.S

11 105.00 Brick work using common burnt clay building bricks having crushing strength not less than Cum 4526.81 Rupees Four Thousand Five

35 kg./Sq.Cm. in superstructure in Cement Mortar 1:5. (1- Cement : 5 -fine sand)(B) Hundred Twenty Six Paise

Conventional Eighty One Only

12 58.00 Providing 10mm thick cement plaster in single coat on brick/concrete walls for interior SqM 108.58 Rupees One Hundred Eight

plastering upto floor two level and inished even and smooth in (iii) Cement mortar 1:6 Paise Fifty Eight Only

(1-cement:6-sand)

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Figure Rs. In Words Accourding to

13 128.00 Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or half SqM 141.48 Rupees One Hundred Estimated

brick walls for interior plastering upto floor two level and finished even and smooth in (iii) Fourty One Paise Fourty

Cement mortar 1:6 (1-cement:6-sand) Eight Only

14 1712.00 20mm thick sand faced cement plaster on walls upto height 10 metres above ground level SqM 315.69 Rupees Three Hundred

consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick Fifteen Paise Sixty Nine

finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete. Only

15 186.00 Applying two coats of Birla or Asian acrylic lapy ( putty) & two coats of primer of SqM 40.59 Rupees Fourty Paise Fifty

approved brand and manufacture on new wall surface to give an even shade including Nine Only

thoroughly brushing the surface free from mortar dropping and other foreign matter and

sand papered smooth.

16 675.00 Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on SqM 84.37 Rupees Eighty Four Paise

undecorated wall surface to give an even shade including throughly brushing the surface Thirty Seven Only

free from mortar droppings and other foreign matter and sand papered smooth.

17 2119.00 Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to SqM 120.26 Rupees One Hundred

give an required shape even shade after thoroughly brushing the surface to remove all dirt, Twenty Paise Twenty Six

and remains of loose powdere materials.etc complete Only

18 48.00 Providing and laying polished Kota stone slab flooring over 20mm (Average) thick base of SqM 1013.87 Rupees One Thousand

cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse Thirteen Paise Eighty Seven

sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade Only

of slab including rubbing and polishing etc. complete. (A) 25mm thick

19 35.00 Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe ( SCH- 40) for Rmt 72.65 Rupees Seventy Two Paise

cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the Sixty Five Only

wall with the help of clamp at every two metre C/C or shall be concealed as directed

including necessary fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

20 40.00 Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH- 40) for Rmt 91.84 Rupees Ninety One Paise

cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the Eighty Four Only

wall with the help of clamp at every two metre C/C or shall be concealed as directed

including necessary fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

21 50.00 Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe ( SCH- 40) for Rmt 195.67 Rupees One Hundred

cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the Ninety Five Paise Sixty

wall with the help of clamp at every two metre C/C or shall be concealed as directed Seven Only

including necessary fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Figure Rs. In Words Accourding to

22 60.00 Providing, laying and jointing in true line and level 110 diametre U.P.V.C (Type B) Rmt 876.90 Rupees Eight Hundred Estimated

conforming to IS 13592-1992 with one end plain and other end socketed with rubber ring, Seventy Six Paise Ninety

& fittings conforming to ISI 14735-1999 of approved make for drainage system pipe line, Only

pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using

of PVC clamp of the size 110 mm diametre x 149 mm length x 145 mm heigh at every

mm center to center or shall be concealed in walls as directed including necessary fittings

such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive

solvent cement including cost of all materials.

23 5.00 Providing and fixing screw down bib taps of following size.(B) Brass chromium plated No 186.83 Rupees One Hundred

screws down Bib Tap. (i) 15mm dia. Eighty Six Paise Eighty

24 5.00 Providing and fixing Gun metal check or non-return fullway wheel valve.(A) 15mm dia. No 186.83 Rupees One Hundred

25 3.00 Providing and fixing washbasin with single hole for pillar tap with C.I. or M.S. brackets No 1581.77 Eighty Six

Rupees OnePaise Eighty Five

painted white including sutting holes and making good the same but excluding fittings.(A) Hundred Eighty One Paise

Vitreous China:(ii) Flat Back washbasin 550 mm x v 400mm size. (i) In white colour. Seventy Seven Only

26 3.00 Providing and fixing wsh down water closet (European type, W.C. Pan) with integral P or S No 1356.81 Rupees One Thousand

trap including jointing the trap with soil pipe in Cement Mortar 1:1 (1-Cement : 1-fine sand) Three Hundred Fifty Six

(Seal and cover to be measured and paid for separately)(A) vitreous China Pattern :(i) in Paise Eighty One Only

27 60.00 Providing, laying and jointing in true line and level 160 diametre U.P.V.C (Type B) Rmt 834.38 Rupees Eight Hundred

conforming to IS 13592-1992 with one end plain and other end socketed with rubber ring, Thirty Four Paise Thirty

& fittings conforming to ISI 14735-1999 of approved make for drainage system pipe line, Eight Only

pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using

of PVC clamp of the size 160 mm diametre x 210 mm length x 196 mm heigh at every

mm center to center or shall be concealed in walls as directed including necessary fittings

such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive

solvent cement including cost of all materials.

28 4.00 Providing and fixing in position collapsible steel shutters with vertical channels 20 x 10 x 2 Qun. 6078.18 Rupees Six Thousand

mm braced with flat iron diagonals 20 x 5 mm size with top and bottom rails of T_rin 40x Seventy Eight Paise

40 x 6 mm with 38mm dia, steel pulleys complete with bolts, nuts, locking arrangements, Eighteen Only

stoppers handles including applying a priming coat of red lead paint.

29 1000.00 Providing erecting and fixing double coated ISI water tank of required capacity each with all Lit 3.95 Rupees Three Paise Ninety

necessary fittings and connection etc. complete on terrace. Five Only

30 3.00 Providing and fixing CUPBOARD shutters using 19 mm thick waterproof ( ISI 710) and SqM 2597.72 Rupees Two Thousand Five

fixing 0.8 mm thick decorative lamination sheet 20 mm x 2 mm Plywood frame Hundred Ninety Seven

having a size 7 cm x 4 cm using necessary fixtures, fastening, nails, fevicol, ball catch, Paise Seventy Two Only

magnet and innerside of cupboard oil painting two coats with primer coat etc. complete as

per detailed drawing.

31 7.00 Providing and fixing 35 mm thick SINGLE SHUTTER FLUSH DOOR using Shutters with SqM 5439.86 Rupees Five Thousand Four

both size Decorative 1 mm thick Laminated, pattern and design is to be approved by the Hundred Thirty Nine Paise

Architect, with Stainless Steel handle size 30 Cm Long, Tower Bolt size 15cm, & Heavy Eighty Six Only

Stainless steel Aldrop as per detailed drawing / as directed.

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Figure Rs. In Words Accourding to

32 7.00 Providing and fixing 3 track Aluminium frame Window with two glass sliding shutters & 1 SqM 4452.70 Rupees Four Thousand Estimated

mosquito net shutter and fixed window frame size 63.55 mm. x 38.10 mm. having weight Four Hundred Fifty Two

1.094 Kg./ Mt. shutter frame vertical size 44.45 mmm. x 47.62 mm having weight 1.505 Kg. Paise Seventy Only

/ Mt. and horizontal size 63.50 x 38.10 mm. having weight 1.608 Kg. / Mt. with 5 mm. thick

plain glass or 12 mm. thick Bison panel with necessary closer, fixtures and fastening rubber

biding clips etc. complete.

33 1.00 Providing and fixing standared extruded of alluminium section of size 63mm x 38.10mm x SqM 1175.56 Rupees One Thousand One

1.2mm , @ Wt. 0.643 Kg/mt with colour Powder Coated alluminium frame for ventilation Hundred Seventy Five Paise

with 5 mm thick frosted glass as details etc complete for Ventilation Fifty Six Only

34 3.00 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter with jali Each 586.27 Rupees Five Hundred

of the following nominal diameter of self cleansing design with C.I scread down or hinged Eighty Six Paise Twenty

grating including the cost of cutting and making good the walls. Seven Only

35 3.00 Providing and fixing chromium plated brass half trun flush cock of approved quality Each 263.77 Rupees Two Hundred Sixty

including fixing in pipe line etc. complete.(ii) 25mm dia. Three Paise Seventy Seven

36 60.00 Providing and Fixing Roof panel shall be made out of 0.5 mm thick precoated sheet. The SqM 1643.27 Rupees One Thousand Six

precoated sheet shall be of minimum 240mpa steel grade conforming to IS 14246-1995 and Hundred Fourty Three Paise

shall have zinc coating of minimum 120 gsm as per IS 277-1992, 5-7 microns epoxy primer Twenty Seven Only

on both side of sheet and polyester top 15-18 microns. The PPGI sheet shall have plastic

protective guard film of minimum 25 microns to avoid scratches during transportations. The

sheet should be fixed to the steel member by pop rivets or self drilling / self stiching fastners

@ maximum 450 mm c/c along the length of capping / flashing etc. complete.

37 230.00 supplying and fixing Razor Concertina Coil G.I. wire 600mm dia 1.33kg/Mt (Streched Rmt. 702.96 Rupees Seven Hundred

Length) including galvanised steel barbed wire weight 9.38kg per 100 metre strained (6 Two Paise Ninety Six Only

layer of Barbed Wire) and fixed with Mild steel Angle 40mm x 40mm x 6mm at every 3.0m

interval for fencing on masonary wall including a coat of priming coat of red oxide and two

coated of oil paint on M.S. Angle etc. as per engineer-in-charge etc. complete.

38 22.00 Repairing of existing aluminium section doors/windows/partitions including replacement of SqM 1074.64 Rupees One Thousand

damaged sections, tightening of loose fittings, renewal of accessories, and ensuring proper Seventy Four Paise Sixty

alignment and smooth functioning of shutters. Four Only

39 84.00 Painting one coats (excluding priming coat) on previously painted steel and other metal SqM 57.80 Rupees Fifty Seven Paise

surface with enamel paint, brushing to give an even shade including cleaning the surface of Eighty Only

all dirt, dust and other foreign matter

Amount in Words :

Rupees Twenty Five Lakh Eighty Two Thousand Five Hundred Sixty Three Paise Seventy Three Only

I / We am/are willing to carry out the work at ......................................................………………... % above / below (Should

be written in figures and words) of the estimated rates mentioned above. Amount of my/our tender works out as under.

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Figure Rs. In Words Accourding to

Estimated amount Estimated amount

Put to tender Rs. …………………… Put to tender Rs…………………..

Add……….. % above Rs. …………………… Deduct…….% below Rs…………………..

Total Rs. …………………… Net Rs…………………..

In words……………………………… In words……………………………………….

(Please strike out whichever is not applicable)

[1] The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no extra payment shall be made.

[2] The labourcess will be deducted as per prevailing rules i.e. 1% of the work done.

[3] GST and Income tax TDS will be deducted at a source while making payments of bills

[4] In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R.

therefore in R.C.C. items where there is a change as per actual mix design the cost of difference of cement consumption have been deducted from the rate of original item at the rate of

input rate mentioned in all the tender.

Signature of Contractor

Deputy Executive Engineer Executive Engineer

R & B Sub Division R & B Division