Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.7 LAccepted-Finance | L1 | Accepted-Finance L1 | |
| 2 | L2₹35.2 L+₹3.5 L (11.1%)Accepted-Finance | L2 | Accepted-Finance L2 | |
| 3 | L3₹35.2 L+₹3.5 L (11.1%)Accepted-Finance VP 1341 Q BADAR COMPLEX FAROOK COLLEGE ROAD VAZHAYOOR AZHINJILAM POST | L3 | Accepted-Finance L3 |
Tender Value
Refer Docs
EMD Value
₹50,000
Closing Date
31 Dec 2024, 11:00 amClosed
UNIT HEAD
KEL EDARIKODE
Construction of 6 Nos Open Gym Fitness Center in Valanchery Municipality under Annual Plan 2024-25
2024_KEL_718580_1
KEL/ KEMG/40/2024
Open Tender
Electrical Works
Item Rate
120 days
KEL EDARIKODE
Please refer Tender documents.
6 documents required · 6 mandatory
₹2,950
Yes
₹50,000
Yes
1 Jan 2025
21 Dec 2024
1 Jan 2025
21 Dec 2024
31 Dec 2024
21 Dec 2024
21 Dec 2024 - 31 Dec 2024
Amount
1. KOTHAYITHODE
2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)
50.6.7.2 : Laterate masonry with neatly dressed laterate stone of size 40x20x15cm or nearest size in cement mortar 1:6 for super structure above plinth level up to floor two level including all cost of materials, labour charges etc.
51.2.3 : Filling with Quarry Muck <br> Filling up low lying and water logged areas with local material/ quarry muck, spreading in layers, leveling the top at site and consolidation by ramming, etc complete for improving the CBR value of subgrade
13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
16.68 : Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.
10.16.1 : Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes
13.52.1 : Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work
13.52.2 : Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On concrete work
od167845/2024_2025 : Fabrication supply conveyance and installation of Granite name board indicating the cost involved, commencement date, completion date and inaguration date etc.
od172677/2024_2025 : Supply and installation of LEG LIFTER of area 2.7’ft*2.4’ft Safe area:6.7’ft*6.4’ft for an age group of 13 years and above .Function is Strenghtens Abdomen, Leg muscles and upper Thigh. Centre pipe:100 NB G.I B-class pipe, Seat frame:32 NB G.I B-class pipe, Leg lever-32 NB G.I B-class pipe, Seat&back rest:LLDPE Roto moulded seat with inbuilt bolts 3/8”*1.5” Handle cover: Nylon 66 injections moulded. Power coat: First coat done of primer- 40-50 micron thickness is 110-120 micron.
od172678/2024_2025 : Supply and installation of CHEST PRESS CUM AIR WALKER CUM STANDING TWISTER for an age group of above 13 years. 3 users at a time can use. Center frame is 100 NB G.I c-class pipe, Top frame 40 NB&32 NB G.I b-class pipe, Handle frame: 32 /NB& 25 NB G.I b-class pipe, Connecting pipe:32 NB&25 NB&40 NB G.I b-class pipe. Seat& back rest- IIdp rotomoulded seat with inbuilt bolts 3/8”*1.5”. Stopper: Pu rod.50 mm dia. Main frame:100 NB G.I c-class pipe leg frame:32 NB G.I b-class pipe Handle frame:25 NB G.I b-class pipe Clamps: Nylon 66 injection moulded casing Foot Rest: LLDP roto moulded seat with inbuilt bolts 3/8" x 1.5" Seat frame:32 Seat frame:32 b-class pipe Handle frame:20 NB G.I b-class pipe Twister disc: lldp roto moulded seat with inbuilt bolts 3/8" x 1.5" Pipe cap: galvanised cap. Bearing cap: cap for 100 NB- Nylon 66 injection moulded. Bearing housing and pin: seamless pipe& round bar Bearings: Permanent sealed of reputed make (FAG/SKF) Nut bolts: Galvanised nut bolts Nut bolts cap: nylon 66 injection moulded with ss m6 fasners. Powder coat: Done by first coat of Primer –40-50 micron thickness and top coat of pure Polyester powder with 70- 80 micron thickness. Total thickness is 110-120 micron.
od172679/2024_2025 : Supply and installation of CYCLE of area 2ft X 2ft of main frame made of 40 NB GI B class pipes and seat frame is 40 NB GI B class. Roto moulded seat and handle frame .Bearing housing and pin is seamless pipe and round bar . Galvanised nut bolts and galvanized pipe cap is used. Nut bolts cap are made up of SS washer cap. Self lubricating bearing is used .Powder coat is top coat of pure polyester powder with 70-80 micron thickness.
od172680/2024_2025 : Supply and installation of SINGLE SURF BOARD of area 3.7’ft*2.6’ft Safe area:7.7’ft*6.6’ft .Age group for13 years and above. The Function of this equipment are Strengthens Leg Muscles, Improves cardio vascular Endurance . Main frame: 100 NB G.I B-Class pipe, Leg frame: 40 NB G.I B-Class pipe , Handle frame: 25 NB G.I B-Class pipe , Clamps: Nylon 66 injection moulded casing Foot Rest: LLDP roto moulded seat with inbuilt bolts 3/8" x 1.5" Pipe Cap: Galvanised cap. Bearing Cap: Nylon 66 injection moulded. Bearing housing and pin: Seamless pipe & Round bar Nut bolts cap: Nylon 66 injection moulded with SS M6 fasteners. Bearings: Permanent sealed of reputed make (FAG/SKF) Nut bolts: Galvanised nut bolts. Powder coat: Done by first coat of Primer –40-50 micron thickness and top coat of pure Polyester powder with 70- 80 micron thickness. Total thickness is 110-120 micron.
od172681/2024_2025 : Supply and installation of STEP TRAINER of area 5 ft X 2ft of main frame made of 100 NB GI B class pipes and foot rest pipe is 40 NB GI B class. LLDP Roto moulded seat with inbuilt bolts 3/8” x 1.5” , handle is 40 NB & 25 NB GI B class pipe .Handle cover is Nylon 66 injection moulded. Bearings is reputed make and Galvanised nut bolts and galvanized pipe cap is used. Nut bolts cap are made up of Nylon 66 injection moulded with SS M6 Fasteners. Powder coat is done by first coat of primer Jotun or equivalent brand 40-50 micron thickness and top coat of pure polyester powder with 70-80 micron thickness. Total thickness is 110-120 micron.
2.MARAKUNN
2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)
50.6.7.2 : Laterate masonry with neatly dressed laterate stone of size 40x20x15cm or nearest size in cement mortar 1:6 for super structure above plinth level up to floor two level including all cost of materials, labour charges etc.
51.2.3 : Filling with Quarry Muck <br> Filling up low lying and water logged areas with local material/ quarry muck, spreading in layers, leveling the top at site and consolidation by ramming, etc complete for improving the CBR value of subgrade
16.68 : Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.
13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
13.52.1 : Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work
13.52.2 : Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On concrete work
10.16.1 : Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes
od167845/2024_2025 : Fabrication supply conveyance and installation of Granite name board indicating the cost involved, commencement date, completion date and inaguration date etc.
od172681/2024_2025 : Supply and installation of STEP TRAINER of area 5 ft X 2ft of main frame made of 100 NB GI B class pipes and foot rest pipe is 40 NB GI B class. LLDP Roto moulded seat with inbuilt bolts 3/8” x 1.5” , handle is 40 NB & 25 NB GI B class pipe .Handle cover is Nylon 66 injection moulded. Bearings is reputed make and Galvanised nut bolts and galvanized pipe cap is used. Nut bolts cap are made up of Nylon 66 injection moulded with SS M6 Fasteners. Powder coat is done by first coat of primer Jotun or equivalent brand 40-50 micron thickness and top coat of pure polyester powder with 70-80 micron thickness. Total thickness is 110-120 micron.
od172677/2024_2025 : Supply and installation of LEG LIFTER of area 2.7’ft*2.4’ft Safe area:6.7’ft*6.4’ft for an age group of 13 years and above .Function is Strenghtens Abdomen, Leg muscles and upper Thigh. Centre pipe:100 NB G.I B-class pipe, Seat frame:32 NB G.I B-class pipe, Leg lever-32 NB G.I B-class pipe, Seat&back rest:LLDPE Roto moulded seat with inbuilt bolts 3/8”*1.5” Handle cover: Nylon 66 injections moulded. Power coat: First coat done of primer- 40-50 micron thickness is 110-120 micron.
od172680/2024_2025 : Supply and installation of SINGLE SURF BOARD of area 3.7’ft*2.6’ft Safe area:7.7’ft*6.6’ft .Age group for13 years and above. The Function of this equipment are Strengthens Leg Muscles, Improves cardio vascular Endurance . Main frame: 100 NB G.I B-Class pipe, Leg frame: 40 NB G.I B-Class pipe , Handle frame: 25 NB G.I B-Class pipe , Clamps: Nylon 66 injection moulded casing Foot Rest: LLDP roto moulded seat with inbuilt bolts 3/8" x 1.5" Pipe Cap: Galvanised cap. Bearing Cap: Nylon 66 injection moulded. Bearing housing and pin: Seamless pipe & Round bar Nut bolts cap: Nylon 66 injection moulded with SS M6 fasteners. Bearings: Permanent sealed of reputed make (FAG/SKF) Nut bolts: Galvanised nut bolts. Powder coat: Done by first coat of Primer –40-50 micron thickness and top coat of pure Polyester powder with 70- 80 micron thickness. Total thickness is 110-120 micron.
od172678/2024_2025 : Supply and installation of CHEST PRESS CUM AIR WALKER CUM STANDING TWISTER for an age group of above 13 years. 3 users at a time can use. Center frame is 100 NB G.I c-class pipe, Top frame 40 NB&32 NB G.I b-class pipe, Handle frame: 32 /NB& 25 NB G.I b-class pipe, Connecting pipe:32 NB&25 NB&40 NB G.I b-class pipe. Seat& back rest- IIdp rotomoulded seat with inbuilt bolts 3/8”*1.5”. Stopper: Pu rod.50 mm dia. Main frame:100 NB G.I c-class pipe leg frame:32 NB G.I b-class pipe Handle frame:25 NB G.I b-class pipe Clamps: Nylon 66 injection moulded casing Foot Rest: LLDP roto moulded seat with inbuilt bolts 3/8" x 1.5" Seat frame:32 Seat frame:32 b-class pipe Handle frame:20 NB G.I b-class pipe Twister disc: lldp roto moulded seat with inbuilt bolts 3/8" x 1.5" Pipe cap: galvanised cap. Bearing cap: cap for 100 NB- Nylon 66 injection moulded. Bearing housing and pin: seamless pipe& round bar Bearings: Permanent sealed of reputed make (FAG/SKF) Nut bolts: Galvanised nut bolts Nut bolts cap: nylon 66 injection moulded with ss m6 fasners. Powder coat: Done by first coat of Primer –40-50 micron thickness and top coat of pure Polyester powder with 70- 80 micron thickness. Total thickness is 110-120 micron.
od172679/2024_2025 : Supply and installation of CYCLE of area 2ft X 2ft of main frame made of 40 NB GI B class pipes and seat frame is 40 NB GI B class. Roto moulded seat and handle frame .Bearing housing and pin is seamless pipe and round bar . Galvanised nut bolts and galvanized pipe cap is used. Nut bolts cap are made up of SS washer cap. Self lubricating bearing is used .Powder coat is top coat of pure polyester powder with 70-80 micron thickness.
3.MANAKKALTHODE
2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)
50.6.7.2 : Laterate masonry with neatly dressed laterate stone of size 40x20x15cm or nearest size in cement mortar 1:6 for super structure above plinth level up to floor two level including all cost of materials, labour charges etc.
51.2.3 : Filling with Quarry Muck <br> Filling up low lying and water logged areas with local material/ quarry muck, spreading in layers, leveling the top at site and consolidation by ramming, etc complete for improving the CBR value of subgrade
16.68 : Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.
13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
13.52.1 : Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work
13.52.2 : Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On concrete work
10.16.1 : Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes
od167845/2024_2025 : Fabrication supply conveyance and installation of Granite name board indicating the cost involved, commencement date, completion date and inaguration date etc.
od172677/2024_2025 : Supply and installation of LEG LIFTER of area 2.7’ft*2.4’ft Safe area:6.7’ft*6.4’ft for an age group of 13 years and above .Function is Strenghtens Abdomen, Leg muscles and upper Thigh. Centre pipe:100 NB G.I B-class pipe, Seat frame:32 NB G.I B-class pipe, Leg lever-32 NB G.I B-class pipe, Seat&back rest:LLDPE Roto moulded seat with inbuilt bolts 3/8”*1.5” Handle cover: Nylon 66 injections moulded. Power coat: First coat done of primer- 40-50 micron thickness is 110-120 micron.
od172680/2024_2025 : Supply and installation of SINGLE SURF BOARD of area 3.7’ft*2.6’ft Safe area:7.7’ft*6.6’ft .Age group for13 years and above. The Function of this equipment are Strengthens Leg Muscles, Improves cardio vascular Endurance . Main frame: 100 NB G.I B-Class pipe, Leg frame: 40 NB G.I B-Class pipe , Handle frame: 25 NB G.I B-Class pipe , Clamps: Nylon 66 injection moulded casing Foot Rest: LLDP roto moulded seat with inbuilt bolts 3/8" x 1.5" Pipe Cap: Galvanised cap. Bearing Cap: Nylon 66 injection moulded. Bearing housing and pin: Seamless pipe & Round bar Nut bolts cap: Nylon 66 injection moulded with SS M6 fasteners. Bearings: Permanent sealed of reputed make (FAG/SKF) Nut bolts: Galvanised nut bolts. Powder coat: Done by first coat of Primer –40-50 micron thickness and top coat of pure Polyester powder with 70- 80 micron thickness. Total thickness is 110-120 micron.
od172678/2024_2025 : Supply and installation of CHEST PRESS CUM AIR WALKER CUM STANDING TWISTER for an age group of above 13 years. 3 users at a time can use. Center frame is 100 NB G.I c-class pipe, Top frame 40 NB&32 NB G.I b-class pipe, Handle frame: 32 /NB& 25 NB G.I b-class pipe, Connecting pipe:32 NB&25 NB&40 NB G.I b-class pipe. Seat& back rest- IIdp rotomoulded seat with inbuilt bolts 3/8”*1.5”. Stopper: Pu rod.50 mm dia. Main frame:100 NB G.I c-class pipe leg frame:32 NB G.I b-class pipe Handle frame:25 NB G.I b-class pipe Clamps: Nylon 66 injection moulded casing Foot Rest: LLDP roto moulded seat with inbuilt bolts 3/8" x 1.5" Seat frame:32 Seat frame:32 b-class pipe Handle frame:20 NB G.I b-class pipe Twister disc: lldp roto moulded seat with inbuilt bolts 3/8" x 1.5" Pipe cap: galvanised cap. Bearing cap: cap for 100 NB- Nylon 66 injection moulded. Bearing housing and pin: seamless pipe& round bar Bearings: Permanent sealed of reputed make (FAG/SKF) Nut bolts: Galvanised nut bolts Nut bolts cap: nylon 66 injection moulded with ss m6 fasners. Powder coat: Done by first coat of Primer –40-50 micron thickness and top coat of pure Polyester powder with 70- 80 micron thickness. Total thickness is 110-120 micron.
od172679/2024_2025 : Supply and installation of CYCLE of area 2ft X 2ft of main frame made of 40 NB GI B class pipes and seat frame is 40 NB GI B class. Roto moulded seat and handle frame .Bearing housing and pin is seamless pipe and round bar . Galvanised nut bolts and galvanized pipe cap is used. Nut bolts cap are made up of SS washer cap. Self lubricating bearing is used .Powder coat is top coat of pure polyester powder with 70-80 micron thickness.
od172681/2024_2025 : Supply and installation of STEP TRAINER of area 5 ft X 2ft of main frame made of 100 NB GI B class pipes and foot rest pipe is 40 NB GI B class. LLDP Roto moulded seat with inbuilt bolts 3/8” x 1.5” , handle is 40 NB & 25 NB GI B class pipe .Handle cover is Nylon 66 injection moulded. Bearings is reputed make and Galvanised nut bolts and galvanized pipe cap is used. Nut bolts cap are made up of Nylon 66 injection moulded with SS M6 Fasteners. Powder coat is done by first coat of primer Jotun or equivalent brand 40-50 micron thickness and top coat of pure polyester powder with 70-80 micron thickness. Total thickness is 110-120 micron.
4. OMANKUZHI
16.68 : Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.
10.16.1 : Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes
13.52.1 : Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work
4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)
od172677/2024_2025 : Supply and installation of LEG LIFTER of area 2.7’ft*2.4’ft Safe area:6.7’ft*6.4’ft for an age group of 13 years and above .Function is Strenghtens Abdomen, Leg muscles and upper Thigh. Centre pipe:100 NB G.I B-class pipe, Seat frame:32 NB G.I B-class pipe, Leg lever-32 NB G.I B-class pipe, Seat&back rest:LLDPE Roto moulded seat with inbuilt bolts 3/8”*1.5” Handle cover: Nylon 66 injections moulded. Power coat: First coat done of primer- 40-50 micron thickness is 110-120 micron.
od172680/2024_2025 : Supply and installation of SINGLE SURF BOARD of area 3.7’ft*2.6’ft Safe area:7.7’ft*6.6’ft .Age group for13 years and above. The Function of this equipment are Strengthens Leg Muscles, Improves cardio vascular Endurance . Main frame: 100 NB G.I B-Class pipe, Leg frame: 40 NB G.I B-Class pipe , Handle frame: 25 NB G.I B-Class pipe , Clamps: Nylon 66 injection moulded casing Foot Rest: LLDP roto moulded seat with inbuilt bolts 3/8" x 1.5" Pipe Cap: Galvanised cap. Bearing Cap: Nylon 66 injection moulded. Bearing housing and pin: Seamless pipe & Round bar Nut bolts cap: Nylon 66 injection moulded with SS M6 fasteners. Bearings: Permanent sealed of reputed make (FAG/SKF) Nut bolts: Galvanised nut bolts. Powder coat: Done by first coat of Primer –40-50 micron thickness and top coat of pure Polyester powder with 70- 80 micron thickness. Total thickness is 110-120 micron.
od172678/2024_2025 : Supply and installation of CHEST PRESS CUM AIR WALKER CUM STANDING TWISTER for an age group of above 13 years. 3 users at a time can use. Center frame is 100 NB G.I c-class pipe, Top frame 40 NB&32 NB G.I b-class pipe, Handle frame: 32 /NB& 25 NB G.I b-class pipe, Connecting pipe:32 NB&25 NB&40 NB G.I b-class pipe. Seat& back rest- IIdp rotomoulded seat with inbuilt bolts 3/8”*1.5”. Stopper: Pu rod.50 mm dia. Main frame:100 NB G.I c-class pipe leg frame:32 NB G.I b-class pipe Handle frame:25 NB G.I b-class pipe Clamps: Nylon 66 injection moulded casing Foot Rest: LLDP roto moulded seat with inbuilt bolts 3/8" x 1.5" Seat frame:32 Seat frame:32 b-class pipe Handle frame:20 NB G.I b-class pipe Twister disc: lldp roto moulded seat with inbuilt bolts 3/8" x 1.5" Pipe cap: galvanised cap. Bearing cap: cap for 100 NB- Nylon 66 injection moulded. Bearing housing and pin: seamless pipe& round bar Bearings: Permanent sealed of reputed make (FAG/SKF) Nut bolts: Galvanised nut bolts Nut bolts cap: nylon 66 injection moulded with ss m6 fasners. Powder coat: Done by first coat of Primer –40-50 micron thickness and top coat of pure Polyester powder with 70- 80 micron thickness. Total thickness is 110-120 micron.
od172679/2024_2025 : Supply and installation of CYCLE of area 2ft X 2ft of main frame made of 40 NB GI B class pipes and seat frame is 40 NB GI B class. Roto moulded seat and handle frame .Bearing housing and pin is seamless pipe and round bar . Galvanised nut bolts and galvanized pipe cap is used. Nut bolts cap are made up of SS washer cap. Self lubricating bearing is used .Powder coat is top coat of pure polyester powder with 70-80 micron thickness.
od172681/2024_2025 : Supply and installation of STEP TRAINER of area 5 ft X 2ft of main frame made of 100 NB GI B class pipes and foot rest pipe is 40 NB GI B class. LLDP Roto moulded seat with inbuilt bolts 3/8” x 1.5” , handle is 40 NB & 25 NB GI B class pipe .Handle cover is Nylon 66 injection moulded. Bearings is reputed make and Galvanised nut bolts and galvanized pipe cap is used. Nut bolts cap are made up of Nylon 66 injection moulded with SS M6 Fasteners. Powder coat is done by first coat of primer Jotun or equivalent brand 40-50 micron thickness and top coat of pure polyester powder with 70-80 micron thickness. Total thickness is 110-120 micron.
od167845/2024_2025 : Fabrication supply conveyance and installation of Granite name board indicating the cost involved, commencement date, completion date and inaguration date etc.
5.KAVUMPURAM
2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)
50.6.7.2 : Laterate masonry with neatly dressed laterate stone of size 40x20x15cm or nearest size in cement mortar 1:6 for super structure above plinth level up to floor two level including all cost of materials, labour charges etc.
51.2.3 : Filling with Quarry Muck <br> Filling up low lying and water logged areas with local material/ quarry muck, spreading in layers, leveling the top at site and consolidation by ramming, etc complete for improving the CBR value of subgrade
16.68 : Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.
13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
10.16.1 : Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes
13.52.1 : Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work
13.52.2 : Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On concrete work
od172677/2024_2025 : Supply and installation of LEG LIFTER of area 2.7’ft*2.4’ft Safe area:6.7’ft*6.4’ft for an age group of 13 years and above .Function is Strenghtens Abdomen, Leg muscles and upper Thigh. Centre pipe:100 NB G.I B-class pipe, Seat frame:32 NB G.I B-class pipe, Leg lever-32 NB G.I B-class pipe, Seat&back rest:LLDPE Roto moulded seat with inbuilt bolts 3/8”*1.5” Handle cover: Nylon 66 injections moulded. Power coat: First coat done of primer- 40-50 micron thickness is 110-120 micron.
od172680/2024_2025 : Supply and installation of SINGLE SURF BOARD of area 3.7’ft*2.6’ft Safe area:7.7’ft*6.6’ft .Age group for13 years and above. The Function of this equipment are Strengthens Leg Muscles, Improves cardio vascular Endurance . Main frame: 100 NB G.I B-Class pipe, Leg frame: 40 NB G.I B-Class pipe , Handle frame: 25 NB G.I B-Class pipe , Clamps: Nylon 66 injection moulded casing Foot Rest: LLDP roto moulded seat with inbuilt bolts 3/8" x 1.5" Pipe Cap: Galvanised cap. Bearing Cap: Nylon 66 injection moulded. Bearing housing and pin: Seamless pipe & Round bar Nut bolts cap: Nylon 66 injection moulded with SS M6 fasteners. Bearings: Permanent sealed of reputed make (FAG/SKF) Nut bolts: Galvanised nut bolts. Powder coat: Done by first coat of Primer –40-50 micron thickness and top coat of pure Polyester powder with 70- 80 micron thickness. Total thickness is 110-120 micron.
od172678/2024_2025 : Supply and installation of CHEST PRESS CUM AIR WALKER CUM STANDING TWISTER for an age group of above 13 years. 3 users at a time can use. Center frame is 100 NB G.I c-class pipe, Top frame 40 NB&32 NB G.I b-class pipe, Handle frame: 32 /NB& 25 NB G.I b-class pipe, Connecting pipe:32 NB&25 NB&40 NB G.I b-class pipe. Seat& back rest- IIdp rotomoulded seat with inbuilt bolts 3/8”*1.5”. Stopper: Pu rod.50 mm dia. Main frame:100 NB G.I c-class pipe leg frame:32 NB G.I b-class pipe Handle frame:25 NB G.I b-class pipe Clamps: Nylon 66 injection moulded casing Foot Rest: LLDP roto moulded seat with inbuilt bolts 3/8" x 1.5" Seat frame:32 Seat frame:32 b-class pipe Handle frame:20 NB G.I b-class pipe Twister disc: lldp roto moulded seat with inbuilt bolts 3/8" x 1.5" Pipe cap: galvanised cap. Bearing cap: cap for 100 NB- Nylon 66 injection moulded. Bearing housing and pin: seamless pipe& round bar Bearings: Permanent sealed of reputed make (FAG/SKF) Nut bolts: Galvanised nut bolts Nut bolts cap: nylon 66 injection moulded with ss m6 fasners. Powder coat: Done by first coat of Primer –40-50 micron thickness and top coat of pure Polyester powder with 70- 80 micron thickness. Total thickness is 110-120 micron.
od172679/2024_2025 : Supply and installation of CYCLE of area 2ft X 2ft of main frame made of 40 NB GI B class pipes and seat frame is 40 NB GI B class. Roto moulded seat and handle frame .Bearing housing and pin is seamless pipe and round bar . Galvanised nut bolts and galvanized pipe cap is used. Nut bolts cap are made up of SS washer cap. Self lubricating bearing is used .Powder coat is top coat of pure polyester powder with 70-80 micron thickness.
od172681/2024_2025 : Supply and installation of STEP TRAINER of area 5 ft X 2ft of main frame made of 100 NB GI B class pipes and foot rest pipe is 40 NB GI B class. LLDP Roto moulded seat with inbuilt bolts 3/8” x 1.5” , handle is 40 NB & 25 NB GI B class pipe .Handle cover is Nylon 66 injection moulded. Bearings is reputed make and Galvanised nut bolts and galvanized pipe cap is used. Nut bolts cap are made up of Nylon 66 injection moulded with SS M6 Fasteners. Powder coat is done by first coat of primer Jotun or equivalent brand 40-50 micron thickness and top coat of pure polyester powder with 70-80 micron thickness. Total thickness is 110-120 micron.
od167845/2024_2025 : Fabrication supply conveyance and installation of Granite name board indicating the cost involved, commencement date, completion date and inaguration date etc.
6.KATTIPARUTHI
4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)
16.68 : Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.
50.6.7.2 : Laterate masonry with neatly dressed laterate stone of size 40x20x15cm or nearest size in cement mortar 1:6 for super structure above plinth level up to floor two level including all cost of materials, labour charges etc.
13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
13.52.1 : Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work
13.52.2 : Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On concrete work
10.16.1 : Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes
od172677/2024_2025 : Supply and installation of LEG LIFTER of area 2.7’ft*2.4’ft Safe area:6.7’ft*6.4’ft for an age group of 13 years and above .Function is Strenghtens Abdomen, Leg muscles and upper Thigh. Centre pipe:100 NB G.I B-class pipe, Seat frame:32 NB G.I B-class pipe, Leg lever-32 NB G.I B-class pipe, Seat&back rest:LLDPE Roto moulded seat with inbuilt bolts 3/8”*1.5” Handle cover: Nylon 66 injections moulded. Power coat: First coat done of primer- 40-50 micron thickness is 110-120 micron.
od172680/2024_2025 : Supply and installation of SINGLE SURF BOARD of area 3.7’ft*2.6’ft Safe area:7.7’ft*6.6’ft .Age group for13 years and above. The Function of this equipment are Strengthens Leg Muscles, Improves cardio vascular Endurance . Main frame: 100 NB G.I B-Class pipe, Leg frame: 40 NB G.I B-Class pipe , Handle frame: 25 NB G.I B-Class pipe , Clamps: Nylon 66 injection moulded casing Foot Rest: LLDP roto moulded seat with inbuilt bolts 3/8" x 1.5" Pipe Cap: Galvanised cap. Bearing Cap: Nylon 66 injection moulded. Bearing housing and pin: Seamless pipe & Round bar Nut bolts cap: Nylon 66 injection moulded with SS M6 fasteners. Bearings: Permanent sealed of reputed make (FAG/SKF) Nut bolts: Galvanised nut bolts. Powder coat: Done by first coat of Primer –40-50 micron thickness and top coat of pure Polyester powder with 70- 80 micron thickness. Total thickness is 110-120 micron.
od172678/2024_2025 : Supply and installation of CHEST PRESS CUM AIR WALKER CUM STANDING TWISTER for an age group of above 13 years. 3 users at a time can use. Center frame is 100 NB G.I c-class pipe, Top frame 40 NB&32 NB G.I b-class pipe, Handle frame: 32 /NB& 25 NB G.I b-class pipe, Connecting pipe:32 NB&25 NB&40 NB G.I b-class pipe. Seat& back rest- IIdp rotomoulded seat with inbuilt bolts 3/8”*1.5”. Stopper: Pu rod.50 mm dia. Main frame:100 NB G.I c-class pipe leg frame:32 NB G.I b-class pipe Handle frame:25 NB G.I b-class pipe Clamps: Nylon 66 injection moulded casing Foot Rest: LLDP roto moulded seat with inbuilt bolts 3/8" x 1.5" Seat frame:32 Seat frame:32 b-class pipe Handle frame:20 NB G.I b-class pipe Twister disc: lldp roto moulded seat with inbuilt bolts 3/8" x 1.5" Pipe cap: galvanised cap. Bearing cap: cap for 100 NB- Nylon 66 injection moulded. Bearing housing and pin: seamless pipe& round bar Bearings: Permanent sealed of reputed make (FAG/SKF) Nut bolts: Galvanised nut bolts Nut bolts cap: nylon 66 injection moulded with ss m6 fasners. Powder coat: Done by first coat of Primer –40-50 micron thickness and top coat of pure Polyester powder with 70- 80 micron thickness. Total thickness is 110-120 micron.
od172679/2024_2025 : Supply and installation of CYCLE of area 2ft X 2ft of main frame made of 40 NB GI B class pipes and seat frame is 40 NB GI B class. Roto moulded seat and handle frame .Bearing housing and pin is seamless pipe and round bar . Galvanised nut bolts and galvanized pipe cap is used. Nut bolts cap are made up of SS washer cap. Self lubricating bearing is used .Powder coat is top coat of pure polyester powder with 70-80 micron thickness.
od172681/2024_2025 : Supply and installation of STEP TRAINER of area 5 ft X 2ft of main frame made of 100 NB GI B class pipes and foot rest pipe is 40 NB GI B class. LLDP Roto moulded seat with inbuilt bolts 3/8” x 1.5” , handle is 40 NB & 25 NB GI B class pipe .Handle cover is Nylon 66 injection moulded. Bearings is reputed make and Galvanised nut bolts and galvanized pipe cap is used. Nut bolts cap are made up of Nylon 66 injection moulded with SS M6 Fasteners. Powder coat is done by first coat of primer Jotun or equivalent brand 40-50 micron thickness and top coat of pure polyester powder with 70-80 micron thickness. Total thickness is 110-120 micron.
od167845/2024_2025 : Fabrication supply conveyance and installation of Granite name board indicating the cost involved, commencement date, completion date and inaguration date etc.
CONTIGENCIES
akbar (BID ID -2041016)
ELANEX INFRA PROJECTS (BID ID -2041983)
Bidder Name
akbar
SOLARVALLEY
ELANEX INFRA PROJECTS
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .