A/R and M/O General Pool Accommodation

Amount

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres (Fifty metres) Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) with in all leads and lift of materials and as per direction of Engineer-in-charge.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete with in all leads and lift of materials and as per direction of Engineer-in-charge.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) with in all leads and lift of materials and as per direction of Engineer-in-charge.

15mm (Fifteen millimetre) cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix 1:4 (1 cement: 4 fine sand) with in all leads and lift of materials and as per direction of Engineer-in-charge.

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre (Fifty grams/litre), of approved manufacturer, of required shade and colour complete, as per anufacturer’s specification Two or more coats on new work with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and applying white cement based putty of average thickness 1 mm (One millimetre), of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded build up standard trubular section/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up thge gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/panelling, C.P. brass/stainless steel screws, (Glazing, paneling and dash fasteners to be paid for separately) Anodised aluminium (anodised transparent or dyed to required shade according to IS:1868, Minimum anodic coating of grade AC15) with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and fixing 12 mm (Twelve millimetre) thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. Pre-laminated particle board with decorative lamination on both sides with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge .(Cost of aluminium snap beading shall be paid in basic item) With float glass panes of 5 mm (Five millimetre) thickness (weight not less than 12.50 kg/ sqm ( Twelve point fifty kilogram/square metre)) with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm (Three hundred x Three hundred millimetre) or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS :15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm (Twenty millimetre) thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (Three point three kilogram/sqaure metre) including pointing the joints with white cement and matching pigments etc., complete with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm (Twelve millimetre) thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm (Three point three kilogram per square metre), including pointing in white cement mixed with pigment of matching shade complete with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:4:8 (1 Cement : 4 coarse sand) : 8 graded stone aggregate 40 mm (Forty millimetre) nominal size) with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and fixing 19mm (Nineteen millimetre) thick water proof commercial board in shelves/box for cup board with butt joints & fixing with nails & screws etc complete with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and fixing 19mm (Nineteen millimetre) thick commercial board water proof shutters for cup board i/c fixing with nickel plated piano hinges with screws etc complete with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and fixing 1.00mm (One point zero millimetre) thick wooden shade teak ply on board/ply wood sheets with approved adhesive and nails etc complete with in all leads and lift of materials and as per direction of Engineer-in-charge.

Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm (Zero point ninety litre/ Ten square metre) overanother coat of primer applied @0.75 ltr/10 sqm (Zero point seventy five litre/Ten square metre) of approved brand and manufacture with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing wood work in frames of doors, windows, celerstory window and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (jold fast lugs or dash fastener shall be paid for seperately), Deodar wood with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and fixing Wire gauge shutter using galvanised MS wire gauge of apreature 1.4 mm (One point four millimetre) both direction with wire of dia 0.63 mm (Zero point sixty three millimetre) for door window and clestory window with hings and necessary screw 35 mm (Thirty five millimetre) klin seasoned wood with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and fixing Telescopic channel 22" with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and fixing square edges cover fillets (beading) 19mmx6mm (Nineteen millimeter x Six millmetre) section i/c mitring at junctions with wood screws and nails complete with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and fixing bright finished brass handles with screws etc. complete: 125 mm (One hundred twenty five millimetre) with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 150x10 mm (One hundred fifty x Ten millimetre) with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg (Thirty five kilogram and door width upto 700 mm (Seven hundred millimetre)), with necessary accessories and screws etc. complete with in all leads and lift of materials and as per direction of Engineer-in-charge.

Renewing glass panes and refixing existing wooden fillets:Float glass panes of nominal thickness 4 mm (Four millimetre)(weight not less than 10kg/sqm (Ten kilogram/ square metre)) with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS:15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, i/c fixing the pipe with clamps at 1.00 m (One point zero millimetre) spacing. This includes the cost of cutting chases and making good the same including testing of joints complete with in all leads and lift of materials and as per direction of Engineer-in-charge. PN - 16 Pipe, 20mm (Twenty millimetre) OD (SDR-7.4

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre (Ten litre) low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm (Forty millimetre) flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and fixing consealed wash basin with C.I. brackets, 15 mm (Fifteen millimetre) C.P. brass pillar taps, 32 mm (Thirty two millimetre) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 550x 400 mm (Five hundred fifty x Four hundred millimetre) with hite vitreous china pedestal (Cera) with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and fixing calvina wash basin with C.I. brackets, 15 mm (Fifteen millimetre) C.P. brass pillar taps, 32 mm (Thirty two millimetre) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 550x 400 mm with hite vitreous china pedestal (Cera) with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.10 litre (Ten litre) capacity - White with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete White solid plastic seat with lid with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete Flexible pipe 32 mm (Thirty two millimetre) dia with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and fixing 600x450 mm (Six hundred x Four hundred fifty millimetre) bevelled edged mirror of superior glass (of approved quality) complete with 6 mm (Six millimetre) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and fixing 600x120x5 mm (Six hundred x One hundred twenty x Five millimetre) glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm (Forty millimetre) long screws, rawl plugs etc., complete with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 15 mm (Fifteen millimetre) nominal bore with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms (Eight hundred ten grams). 15 mm (Fifteen millimetre) nominal bore with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931 15 mm (Fifteen millimetre) nominal bore with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm (Fifteen millimetre) nominal bore with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour 15 mm (Fifteen milimetre) nominal bore with 45 cm (Forty five centimetre) length with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and fixing 2mm (Two millimetre) thick PVC antistatic venyl Flooring plain or coloured, carbed or mosaic/metalled finish laid with approved adhesive on sub-floor (damp proofing treatment to be paid for separately (Old schedule) with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and fixing C.P. Sink Mixture of approved quality conforming to IS standards and weighing not less than 810 gms (Eight hundred ten grams).15 mm (Fifteen millimetre) nominal bore with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and fixing C.P. Centre hole wash basin mixture of approved quality conforming to IS standards and weighing not less than 810 gms (Eight hundred ten grams).15 mm (Fifteen millimetre) nominal bore with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and fixing C.P.non telephonic wall mixture of approved quality conforming to IS standards and weighing not less than 810 gms (Eight hundred ten grams). 15 mm (Fifteen millimetre) nominal bore with in all leads and lift of materials and as per direction of Engineer-in-charge.

Varnishing with varnish of approved brand and manufacture Two or more coats of glue sizing with copal varnish over an under coat of flatting varnish with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and fixing Steel pawa 100 mm (One hundred millimetre) height of approved quality conforming to IS standards with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and fixing Steel pawa 50 mm (Fifty millimetre) height of approved quality conforming to IS standards with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and fixing plain basket 15x20x8" height of approved quality conforming to IS standards with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and fixing cutlary steel basket 15x20x4" height of approved quality conforming to IS standards with in all leads and lift of materials and as per direction of Engineer-in-charge.

Ajeet Sharma