Providing New Cooling Tower and Addition Alternation work at old IPD building at GMERS Hospital Campus Navsari. Ta & Di- Navsari

Item Description Qty Unit Rate Rupees in words Amount

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured

cable multistrand Copper conductor for 1.1 KV. to be laid on

1 4-4-2. wall with necessary clamps or in existing trench / pipe at road 91 Mtr 287.85

Seven And Paise

crossing or floor of following size of cable. (B) 3 core 4 Sq. mm

Eighty Five Only

Providing , erecting , fabricating the M.S. structure as per

requirement on site incorporating proper size of M.S.

angles,square,round, flats, bars, channels, sections complete Rupees Seventy

2 3-16-4-A with cutting, welding, grinding & finishing duly painted with one 1500 Kg. 77.77 Seven And Paise

coat of red oxide with erection on site as per direction of Seventy Seven Only

engineer in charge with necessary grouting, cementing,

plastering & finishing complete.

BALANCING VALVE WITH BUILT IN MEASURING FACILITY

with C I body flanged construction with EPDM coated disc with Rupees Fifty Six

long pitch & PN 16 pressure rating for condenser water Thousand Six

3 circulation as specified. 250 mm dia. 6 Nos 56624.20 Hundred Twenty

NON - RETURN VALVE with dual plate of C I body SS plates

vulcanized NBR seal flanged end & PN 16 pressure rating as

in GMERS Rupees Seventeen

specified. 250 mm dia.

Navsari Thousand Forty

Tender Nine And Paise

Estimate Fifty Only

providing and erecting Y - STRAINER of Ductile CI Body Rupees Thirty Six

flanged ends with stainless steel strainer for chilled / hot water Thousand Eighty

circulation including insulation as specified. 250mm dia One And Paise

Twenty Four Only

Supplying, fixing, testing and commissioning of condenser

water pipes of following sizes of MS 'C' class along with

necessary clamps, vibration isolators and fittings such as

bends,tees etc.but excluding valves, strainers, gauges etc.

adequately supported on rigid supports duly painted/buried

in ground excavation and refilling etc. as per specification Rupees Six

and as required complete in all respect. Note:- The Pipes Thousand Forty Six

size 150mm & below shall be M.S. 'C' class as per IS : 1239 And Paise Eighty

and pipes size above 150mm shall be welded black steel pipe Seven Only

heavy class as per IS: 3589, from minimum 6.35mm thick M.S.

Sheet for pipes upto 350 mm dia. And from minimum 7mm

thick MS sheet for pipes of 400 mm dia and above. (B)

Supplying, fixing, testing and commissioning of following

Approved valves, strainers, gauges in the chilled water duly insulated to

Rupees Nineteen

in GMERS the same specifications as the connected piping and

Navsari adequately supported as per specifications. BUTTERFLY

7 6 Nos 19492.56 Hundred Ninety

Tender VALVE (MANUAL) with C I body SS Disc, Nitrile Rubber Seal

Estimate & O- Ring PN 16 pressure rating for chilled water/hot water

No 739 circulation as specified. 250mm dia.

Supply, installation, testing and commissioning of CTI Ceriified

Single cell FRP induced draft Cooling Tower of capacity

TR (Heat Rejection Capacity - 636364 K Cal per hour.)

complete with FRP water basin, PVC fillings, statically and

dynamically balanced aluminium die cast fan & hub, TEFC

Lakh(s) Nineteen

8 electrical drive motor, suction screen, make up & quick fill 2

MR Nos 719625.00 Thousand Six

arrangement, over flow & drain connection, suitable steel

ladder, motor guard etc. and conforming to standard

specification. Operating Parameters : Inlet Water Temperature

-36.00 °C, Outlet Water Temperature 32.00 °C, local wet bulb

temp. : 28.7 C, Flow rate - 900 usgpm

SITC of Condensor copper piping assebly for screw chiller

110 TR Capecity suitable for entering water temp 32.2 deg C

and leaving water temp 39.4 Deg C, water flow rate 1060 US

GPM ,liquid sub colling capecity 4-5 deg C,copper tubing Dia

Lakh(s) Fifty Eight

18.92 MM,shell dia meter 355.6 and shell thickness

9 MR 1 Nos 958187.00 Thousand One

mm,fouling factor 0.0005 FPS and pressure Drop 0.67 Bar

including LIfting,shifting existing condenser assebley

Removing,necessary Gas charging, pressure testing,

comissioning,Testing and make it chiller functional and

working condition

Total Amount (without GST) in Rs.

Total Amount (without GST) in Rs.

DISMENTLING WORK: Existing Condensor copper piping Rupees Eighty Five

assebly of 110 TR screw chiller Thousand Only

Estimated Amount

Amount Put to tender Rs. ………………………………………….

Net Total Rs. ………………………………………….

Rebate in Tender …………………………………………………………………….

All works shall be carried out as per public works department handbook and other specification of division or as Directed

All the columns in Schedule should be filled in ink and the total of the entries in the last column should be struck by the contractor under his

Rate quoted include clearance of site( prior commencement of work and at its close) in all respects and hold good for work under all condition, site,

moisture, weather etc.

To be continued on additional sheets, if found necessary.

Note:- 1 All rates are inclusive of all taxes, duties & all government charges. No extra payment will be made in this regards.

Rate quoted shall not be unjustifiable. Such tender shall submit rate justification to the competent authority.

Note :-3 Dismantled item Amount will be deducted from bill as per R&B SOR on quoted item rates.

Assistant Engineer (Ele.)

Dy. Executive Eng. (Ele.) Executive Eng. (Ele.)

PIU, Navsari. PIU, Surat.