District Panchayath-Deposit Work -Urban

Amount

Working Charges

Dismantling manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer -in-Charge:Bituminous road

Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :" Ordinary Rock.

"Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : Medium Rock (blasting prohibited)

Fencing one side of trenches, 1.50 m height with two rows of 10 cm plastic caution tape in vertical casuarina pole (girth 15cm to 24cm) fixed at 2 m intervals

Conveying and laying S&S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming to IS: 8329 excluding cost of pipes and specials : 300 mm dia Ductile Iron Class K-9 Pipes

Laying UPVC pipes of class 2 to class 6 and specials, lowering to the trenches already made, placing in position aligning the pipe line to the lines and levels and jointing the pipes and specials with solvent cement and testing the pipe line with water to the required test pressure (excluding cost of pipes and specials). 90 mm nominal outer dia pipes."

Laying UPVC pipes of class 2 to class 6 and specials, lowering to the trenches already made, placing in position aligning the pipe line to the lines and levels and jointing the pipes and specials with solvent cement and testing the pipe line with water to the required test pressure (excluding cost of pipes and specials). 110 mm nominal outer dia pipes.

Conveying and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. but excluding cost of pipes and fittings - External work. 80 mm dia nominal bore

Conveying and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. but excluding cost of pipes and fittings - External work. 100 mm dia nominal bor

Providing push - on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket:300 mm dia pipe

Labour for cutting C.I. pipe with steel saw.300 mm diameter C.I. pipe

Fabricating MS pipes of size 300mm (ID) using 8 mm thick MS plate including cost and conveyance charges of MS plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under coat of primer etc. complete: For pipes fabricated with 8mm thick MS plates.

Fabricating MS flanges of diameter 300 mm using 12 mm thick MS plate including cost and conveyance charges of MS plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under coat of primer etc. complete: For pipes fabricated with 8mm thick MS plates.

Cutting 300 mm (ID) MS pipes for making bends and other specials by gas cutting including cost of gas, all labour and hire charges of tools etc. complete: For pipes fabricated with 8mm thick MS plates.

Welding 300 mm (ID) MS pipes for making bends and other specials by gas/electric welding machine including cost of gas and welding rods ,all labour and hire charges of tools etc. complete: For pipes fabricated with 8mm thick MS plates.

Grinding cut and weld edges of 300 mm (ID) MS pipes during fabrication work including all labour and hire charges of tools etc. complete: For pipes fabricated with 8mm thick MS plates.

Providing flanged joints to double flanged C.I./ D.I pipes and specials, including testing of joints:300 mm diameter pipe

Testing 300mm DI/CI pipeline with potable water to the required test pressure. 300 mm dia Observed Data derived from item no.1023 of PHED DATA

Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertion etc. (the tail pieces if required will be paid separately):250 mm diameter

Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertion etc. (the tail pieces if required will be paid separately):100 mm diameter

Providing and fixing C.I double acting air valve of approved quality with bolts, nuts, rubber insertion etc. complete ( The tail pieces, tapers etc. if required will be paid separately):

"Conveying and fixing C.I. sluice valves (with cap) by providing complete with bolts, nuts, rubber insertions etc. excluding the cost of valve (the tail pieces if required will be paid separately) : 80 mm diameter. Class I

Interconnecting110mm PVC new pipe line with existing 250mm AC pipe line using 250mmx50mm MS saddle including cost of materials .labour, earthwork excavation etc. complete

Interconnecting PVC new lines with existing branch lines using 110/90mmPVC saddle including cost of materials .labour, earthwork excavation etc.

Interconnecting the newly laid 300 mm DI Pipe to pump houses including cutting and dismantling the existing pipeline to the required length and providing suitable size tale piece and CID Joints other specials including cost of necessary earthwork excavation

Supply ,stacking,spreading and consolidating of Quarry Muck in the trench of pipe line, including carriage, loading ,unloading & stacking up to any lead.

Construction of granular sub- base by Providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, Carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in- Charge.With material conforming to Grade-II (size range 53 mm to 0.075 mm ) having CBR Value-25

Supplying and stacking at site.Good earth

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:

Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete

12 mm cement plaster of mix:

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.80 mm thick C.C. paver block of M-30 grade with approved color design and pattern.

Laying old cement concrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (Old CC paver blocks shall be supplied by the department free of cost.)

Valve chamber(4nos)

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil (Ref. Item No. 2.10.1 of DSR)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

Centering and shuttering including strutting, propping etc. and removal of form work for:Retaining walls, return walls, (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc.

Cost of Materials

Supply of DI K9 Pipe Conforming to IS 8329/2000, 300mm Dia.

Providing and laying S&S.C.I Standard specials such as tees, bends, collars tapers and caps etc., suitable for flanged jointing as per IS: 1538:

Supply of uPVC Pipe, IS 4985: 2000 , 6kg/cm2, 90mm Dia.

Supply of uPVC Pipe, IS 4985: 2000 , 6kg/cm2, 110mm Dia.

Supplying 100 mm GI pipe

Supply of 80 mm GI pipe

Supplying and conveying 90 mm PVC Bend

Supplying and conveying 80 mm GI Bend

Supplying, conveying 100 mm GI Bend

Supplying and conveying 90 mm PVC TC

Supplying and conveying 110 mm PVC Bend

Supply of CI Double Flanged Sluice Valve Conforming to IS 14846 - 2000, Sluice Valve with Cap PN 1.0, Size 80mm.

Erection of pump set

Supply of best quality make ,brand new Mono block Vacuum pump suitable for priming 2 nos of 40 Hp centrifugal pump set of suction pipe size of 150 mm working on 3 phase 415 V 50 Hz AC supply with 3HP ,2900 rpm ,electric motor , including starter etc complete including required cables with suitable size Heavy duty PVC suction pipe for the vacuum pump (20 mm) ,suitable specials such as couplings ,union,Tee etc as required for completion work ,Ball valve with necessary fittings for the pump (20 mm) ,GI/PVC filling tank for vacuum pump with valve (50 L) and Erection charges for the above complete set Supply of suitable size Heavy duty PVC suction pipe for the vacuum pump (20mm),suitable specials such as couplings, union, Tee , etc as required for completion of work, Ball valve with necessary fittings for the pump (20mm) , cost of tank with GI/PVC fittings for vacuum pump with valve (50L) ,Erection charges for the above complete set Including two years Warranty.

Supply & Erection of 5 HP sludge pump set with specification head 11 m discharge 30 m3/hr<br>with electric motor - 3.7 KW/ 1440 rpm/ 50 Hz/ 415 V/ 3p/ 10.0 A. Material - Shaft - SS, Castings - FG200, Impeller -<br>FG200.<br>

Renovation work at Pothiyakkara and Kalady Plant

Supplying and fixing 70 sq. mm 3.5 Core Aluminum armored cable including the charges for end crimpling for main panel board at Treatment plant to Sub panel board at Clear water Pump house.

Replacing the damaged bearings of existing 75 HP VT motor pump set at Kalady HW ,disconnecting power supply, detaching the discharge head, detaching the induction motor from<br>base plate, conveying the motor to suitable place in the pump house ,Detaching the delivery pipe from pump set ,loosing the foundation bolt, take out the base plate<br>from the foundation Detaching the damaged gland cup from base plate Conveying the main shaft and gland cup to lathe workshop Supply of suitable size SS bush :Charges for Supply of Bearings No.29324 E, 6316 Grease LGMT 31N/I etc.

Supply of CI Double Flanged Sluice Valve Conforming to IS 14846 - 2000, Sluice Valve with Hand Wheel PN 1.6, Size 200mm.

Supply of CI Double Flanged Sluice Valve Conforming to IS 14846 - 2000, Sluice Valve with Hand Wheel PN 1.6, Size 250mm.

Supply of CI Double Flanged Sluice Valve Conforming to IS 14846 - 2000, Sluice Valve with Hand Wheel PN 1.6, Size 300mm.

Dismantling of C. I sluice valve including stacking of useful materials within a lead of 50 metres.Above 150 mm diameter

Conveying and fixing C.I. sluice valves (with cap) by providing complete with bolts, nuts, rubber insertions etc. excluding the cost of valve (the tail pieces if required will be paid separately) : 200 mm diameter. Class II" Data derived from item no.18.31.4.2of DAR

Conveying and fixing C.I. sluice valves (with cap) by providing complete with bolts, nuts, rubber insertions etc. excluding the cost of valve (the tail pieces if required will be paid separately) : 250 mm diameter. Class II" Data derived from item no.18.31.5.2of DAR

Conveying and fixing C.I. sluice valves (with cap) by providing complete with bolts, nuts, rubber insertions etc. excluding the cost of valve (the tail pieces if required will be paid separately) : 300 mm diameter. Class II" Data derived from item no.18.31.6.2of DAR

Supply erection and commissioning of flocculator in the moving bridge assembly as directed by the<br>engineer in charge with 1.5HP motor of reputed make with rpm 1500 and reduction gear box of ratio 50:1<br>with SS shaft and paddles(Paddle area should match the existing)

:FLASH MIXTURE :- Replacing Flash mixture unit of existing capacity ,by providing base plate<br>for motor and gear using MS Channel and frames supplying and fixing motor and reduction gear etc coupled together<br>fixing flash mixture puddles with stainless steel shaft and making ready for smooth functioning

Alum TANK :- Replacing mechanical unit of chemical mixing and feeder lines ,by providing<br>base plate for fixing motor and reduction gear using MS channel and angles supplying and fixing stainless steel<br>puddles to the stainless steel shaft and making ready for smooth functioning.

LIME TANK :- Replacing mechanical unit of chemical mixing and feeder lines ,by providing<br>base plate for fixing motor and reduction gear using MS channel and angles supplying and fixing stainless steel<br>puddles to the stainless steel shaft and making ready for smooth functioning.

Replacing the damaged traction unit of existing clarifloculator with 2 HP motor, reduction gear unit ,and with all accessories for mounting in the existing base and maintaining the required speed ,required capacity starter ,cabling ,replacing the panel boards of all drives including all the incidental charges as directed by departmental officers.

Supplying and erection of MS chequered plate with 10 mm thick over the support steel bridge

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x1.25 mm M.S. laths with 1.25 mm thick top cover

increasing the height of tray of aerator to a height of 70 cm by providing MS sheet 3mm thick, stabilizing by angle iron support vertical 40x40x6mm MS angle spacing nearly 60 cm c/c and horizontal stiffeners top and bottom 35x35x5mm .including fixing properly on the outer tray of the aerator including all incidental charges etc. complete as per the direction of departmental officers.

Item Shifted to head 14 as item 14.74Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.

Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqm

supplying erecting and Commissioning of gravity feed wall mount type Chlorinator of Capacity 0 to1.00 Kg/hr., with primary and Secondary gas filter control valves ,mixing chamber ,pressure gauge with necessary connections required length of best quality Teflon piping for gas flow from cylinder to chlorinator along with brass connector and compression ring etc. Suitable PVC Pipe and fittings for water inlet and out let connections .The supplied items and erections shall conform with relevant IS Standards.

Supplying Chlorine Cylinder of 100kg capacity with valve and guard, certified by BIS and necessary factory test and explosive certificates, including registering of cylinder in Travancore Cochin Chemicals in favour of KWA, Angamaly. Valve tighting, painting and formalities in Travancore Cochin Chemicals and also initial filling of Chlorine gas as per the directions of Departmental officers.

adarshengineers

Bidder Name

adarshengineers

MB PRADEEP