Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹35.8 LAdmitted-Finance | -33.90% | ₹35.8 L | L1 | Admitted-Finance |
| 2 | L2₹41.1 LAdmitted-Finance | -24.11% | ₹41.1 L | L2 | Admitted-Finance |
| 3 | L3₹41.8 LAdmitted-Finance | -22.70% | ₹41.8 L | L3 | Admitted-Finance |
| 4 | L4₹44.5 LAdmitted-Finance | -17.75% | ₹44.5 L | L4 | Admitted-Finance |
| 5 | L5₹45.8 LAdmitted-Finance | -15.36% | ₹45.8 L | L5 | Admitted-Finance |
Tender Value
₹54.1 L
EMD Value
₹1.1 L
Closing Date
15 Apr 2026, 5:00 pmClosed
Sr Manager E/M-III
Noida Authority Office Sector 39 Noida
Providing Street Lighting arrangement on Footpath in newly doveloped green belt park in front of Barat Ghar, sec-112,Noida
2026_NOIDA_1132489_1
25/GM(E/M)/SM(E and M)-III/2025-26
Open Tender
Electrical Works
120 days
Noida
Please refer to tender document
3 documents required · 3 mandatory
₹2,832
Noida
₹1.1 L
12 May 2026
2 Apr 2026
16 Apr 2026
2 Apr 2026
15 Apr 2026
2 Apr 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Supply , Installation , testing and commissioning of standard 4.0 Mtr. High (above ground) hot dip galvanized (grading of galvenisation average 70 micron or better as per IS 2629 or equivalent) Octagonal pole, with stiffener, chain, allen bolt, foundation, single arm bracket, template, nut and bolts galvanized, factory finish base plate of size 200x200x12mm etc complete as required. The pole shall be made of 3mm thickness sheet with tolerance of +/- 5%. The column shall also be provided with flush door at the bottom with proper strengthening to the cutout of the door opening, a junction/loop box with heavy duty 3 phase , 32 Amp. connector with 16A DP MCB including all accessories complete as required derected by E/I.(Make -Bajaj/Transrail/Volmont) | |||||
| 2S/Fixing of LED Street Light fitting having die cast Aluminium body and difuser with driver set suitable for 52 to 72 watt. Confirming to IP-66 and above protection. Complete in all respects. (PS No. 1422) Cat-AAA.(Make - LT/Bajaj/Havells/ Crompton/Philips/Wipro) | |||||
| 3Supply and Fixing of 16 Mtr High Mast pole of approved make with rising system, Hot dip galvanised inside & outside, having pole sheet thickness 3mm, top dia minimum 150 mm bottom dia miimum 360 mm base plate 32 m thick, suitable for wind velicity as per IS 875 part 3 & having no circumferential weld with accessories for High Mast such as heat frame suitable for 6 luminaries & its control gear boxes, 1.5 HP power tool motor, 3 point suspension system with steel wire rope 6 mm dia, double drum winch, including making suitable foundation as per manufacturer drawing & site requirement along with foundation bolts, nuts, washer, Anchor plate etc. Complete in all respects as per direction and satisfaction to the Engineer-in-charge (PS No. 652) (Make - Bajaj/Transrail/Volmont) | |||||
| 4Supply and fixing of Factory wired integral LED Flood Light Luminaires with die cast Aluminium housing build with driver set suitable for 140 to 150 watt. Confirming to IP66 and above protection. Complete in all respects. (PS No. 1454) CAT-AAA . (Make - LT/Bajaj/Havells/Crompton/Philips/Wipro) | |||||
| 5 | S/F of out door type 11KV fuse set Relco/Rama/Rastriya make with insulator Jai shree/BHEL make complete in all respects as per direction of E/I.(AOR) | 1 | Nos. | - | - |
| 6Supply of Steel Tubular Pole 11 M long designated 410-SP-56 . complete in all respects as per direction of E/I. .(UPERC P-30) | |||||
| 7Errection of metallic pole of following length in cement concrete 1:3:6 ( 1cement:3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required above 10.0 mtr and upto 12 mtr (DSR 2018 I. n. 11.3.4) | |||||
| 8Supply and erection of overhead line with ACSR Conductor (Dog & Raccoon) poles / service bracket including binding etc. complete in all respects. P.S. No. 627 | |||||
| 9Painting of the electric pole with 2 Coats of aluminium paint over red oxide primer complete in all respects. P.S. No. 634 | |||||
| 10Supplying of channel iron 75mmx40mmx6mm(7.14 Kg Per mtr) pole top bracket/cross arm for single 11 kV overhead line conductor complete with 50mmx6mm flat iron clamp, bolts, nuts and washer including drilling holes for insulator pins bolts and nuts etc, and painting with primer and finish paint as required (DSR-2018 item no. 13.2 pg.44) | |||||
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.15 MB
BOQ_2113642.xls
BOQ • 0.35 MB
TD.pdf
Tender Documents • 1.31 MB
C.xls
Additional Documents • 0.05 MB
Download all tender documents and submit your bid
