supply and installation of Ultrapure Water Purification System

• Feed water : Tap water of up to 1500 micro Siemens conductivity • Operating Temperature : 5 – 35 °C (41 – 95 °F) • Pre-treatment kit : with 1μm filter • Product water : Ultrapure (Type-1) and RO water (Type-II) • Conductivity measurement : After and before Reverse Osmosis • RO water Storage volume : Minimum 6 Lit - with dispenser Ultrapure water (Type -1) quality • Water resistivity : 18.2 MΩ·cm • Water availability : Minimum 3 Lit/h • Instant flow rate : above 0.5 Lit/min • Chlorine levels in product water : Less than 1 ppm. • Total Oxidisable Carbon : Less than 5 ppb • Particulates (size > 0.22 m) : Less than 1 particulate/ml • Bacteria : Less than 0.2 cfu/ml • Endotoxin : Less than 0.001 EU/ml • RNases : Less than 0.01 ng/ml • DNases : Less than 5 pg/μl RO water (Type -II) quality • Water resistivity : 1-10 Mega ohm resistivity • Conductivity : 0.1-1.0 μS/cm • Water availability : Minimum 14 Lit Note: (1) Instrument should be supplied with sterile filter attachment, inbuilt UV lamp(185/254 nm for UV-oxidation) and display of system parameters (2) System should have inbuilt reservoir 3 Lit or more in volume. Water should be recirculated through High Purity Cartridge to maintain purity of Type-II water in tank (3) All replaceable cartridges/accessories required for 3 years has to be supplied free of cost along with the system. (4) Electrical compatibility: 100-250 V, 50-60 Hz (5) Minimum 5 Year onsite warranty. (6) Include minimum 5 User satisfactory certificates